Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Save AdrianKoshka/c1b468859417fd4cbb664c09612a7553 to your computer and use it in GitHub Desktop.
Save AdrianKoshka/c1b468859417fd4cbb664c09612a7553 to your computer and use it in GitHub Desktop.
BootROM - 2.03
Starting CP-0 IOROM 1.07
Booting from SD 0 (0x29)
Found valid image at boot postion 0x000
lNOTICE: Starting binary extension
NOTICE: SVC: DEV ID: 8040, FREQ Mode: 0xd
NOTICE: SVC: AVS work point changed from 0x28 to 0x28
mv_ddr: mv_ddr-devel-18.12.0-g618dadd (Nov 07 2019 - 20:30:06)
mv_ddr: completed successfully
NOTICE: Cold boot
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v1.5(release):1f8ca7e0 (Marvell-devel-18.12.2)
NOTICE: BL1: Built : 20:30:12, Nov 7 2019
NOTICE: BL1: Booting BL2
NOTICE: BL2: v1.5(release):1f8ca7e0 (Marvell-devel-18.12.2)
NOTICE: BL2: Built : 20:30:14, Nov 7 2019
BL2: Initiating SCP_BL2 transfer to SCP
NOTICE: SCP_BL2 contains 5 concatenated images
NOTICE: Skipping MSS CP3 related image
NOTICE: Skipping MSS CP2 related image
NOTICE: Load image to CP1 MSS AP0
NOTICE: Loading MSS image from addr. 0x40269f4 Size 0x1cd8 to MSS at 0xf4280000
NOTICE: Done
NOTICE: Load image to CP0 MSS AP0
NOTICE: Loading MSS image from addr. 0x40286cc Size 0x1cd8 to MSS at 0xf2280000
NOTICE: Done
NOTICE: Load image to AP0 MSS
NOTICE: Loading MSS image from addr. 0x402a3a4 Size 0x5420 to MSS at 0xf0580000
NOTICE: Done
NOTICE: SCP Image doesn't contain PM firmware
NOTICE: BL1: Booting BL31
lNOTICE: MSS PM is not supported in this build
NOTICE: BL31: v1.5(release):1f8ca7e0 (Marvell-devel-18.12.2)
NOTICE: BL31: Built : 20:30:18, Nov 7 2019
Armada Platform Init
Comphy0-0: PCIE0 5 Gbps
Comphy0-1: PCIE0 5 Gbps
Comphy0-2: PCIE0 5 Gbps
Comphy0-3: PCIE0 5 Gbps
Comphy0-4: SFI 10.31 Gbps
Comphy0-5: SATA1 5 Gbps
Comphy1-0: SGMII1 1.25 Gbps
Comphy1-1: SATA2 5 Gbps
Comphy1-2: USB3_HOST0 5 Gbps
Comphy1-3: SATA3 5 Gbps
Comphy1-4: SFI 10.31 Gbps
Comphy1-5: SGMII2 3.125 Gbps
UTMI PHY 0 initialized to USB Host0
UTMI PHY 1 initialized to USB Host1
UTMI PHY 2 initialized to USB Host0
Succesfully installed protocol interfaces
Error: Image at 000BF719000 start failed: 00000001
Detected w25q32bv SPI NOR flash with page size 256 B, erase size 4 KB, total 4 MB
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment