unifi-cloud-key

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.20-ubnt-mtk (bdd@builder) (gcc version 4.9.2 ( 4.9.2-10) ) #2 SMP PREEMPT Thu Apr 30 10:00:37 UTC 2020
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: MT7623
[    0.000000]
SDK 5.0.S.0
[    0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space
[    0.000000] weak reserve function: mtk_wcn_consys_memory_reserve
[    0.000000] cma: CMA: reserved 16 MiB at ee800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] [PHY layout]kernel   :   0x80000000 - 0xffffefff (0x7ffff000)
[    0.000000] creating mapping start pa: 0x80000000 @ 0x80000000 , end pa: 0xef800000 @ 0xef800000
[    0.000000] On node 0 totalpages: 524287
[    0.000000] free_area_init_node: node 0, pgdat 80af68c0, node_mem_map 80db0000
[    0.000000]   Normal zone: 3568 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 456704 pages, LIFO batch:31
[    0.000000]   HighMem zone: 528 pages used for memmap
[    0.000000]   HighMem zone: 67583 pages, LIFO batch:15
[    0.000000] [CORE] num:4
[    0.000000] PERCPU: Embedded 8 pages/cpu @81dba000 s8896 r8192 d15680 u32768
[    0.000000] pcpu-alloc: s8896 r8192 d15680 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520719
[    0.000000] Kernel command line: console=ttyMT2,115200 root=/dev/ram rdinit=/init quiet printk.disable_uart=0 mtdparts=mtk-nor0:0x10000(EEPROM)ro,-(EXT) raeth.macaddr=0xb4,0xfb,0xe4,0x2a,0x99,0x6d gpio-button.gpio=206 gpio-button.eint=118
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] allocated 4194296 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2047MB = 2047MB total
[    0.000000] Memory: 2044476k/2044476k available, 52672k reserved, 270332K highmem
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0x80000000 - 0xef800000   (1784 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7f000000 - 0x7fe00000   (  14 MB)
      .text : 0x80008000 - 0x805e6eac   (6012 kB)
      .init : 0x805e7000 - 0x80aaa2c0   (4877 kB)
      .data : 0x80aac000 - 0x80af7aa0   ( 303 kB)
       .bss : 0x80af7aa0 - 0x80daf258   (2782 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] GPT1_CMP = 130000, HZ = 100
[    0.000000] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382ms
[    0.000000] fwq sysc count
[    0.000000] [UART] mtk console setup : co->index 2 options:115200
[    0.000000] No Flow Control
[    0.000000] [UART] mtk console setup : uart_set_option port(2)baud(115200) parity(n) bits(8) flow(n) - ret(0)
[    0.000000] [UART] mtk setting: (0, 0, 0, 0, 128)
[    0.000000] console [ttyMT2] enabled
[    0.000000] ram_console_early_init: start: 0xf900dc00, size: 7168
[    0.000000] ram_console: found existing buffer, size 2424, start 2424
[    0.000000] console [ram-1] enabled
[    0.060142] Calibrating delay loop... 2072.57 BogoMIPS (lpj=10362880)
[    0.060151] pid_max: default: 32768 minimum: 301
[    0.060339] Mount-cache hash table entries: 512
[    0.061147] Initializing cgroup subsys memory
[    0.061186] Initializing cgroup subsys devices
[    0.064741] Initializing cgroup subsys freezer
[    0.072274] Initializing cgroup subsys blkio
[    0.078195] CPU: Testing write buffer coherency: ok
[    0.078456] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.084971] [ca7_timer]generic_timer_setup entry
[    0.145014] Calibrating local timer... 13.00MHz.
[    0.145057] Setting up static identity map for 0x80474b88 - 0x80474be0
[    0.205298] SCHED: intersects new_mask: 2, cpu_active_mask: 1
[    0.205382] SCHED: intersects new_mask: 2, cpu_active_mask: 1
[    0.205429] Boot slave CPU
[    0.205437] [Power/hotplug] boot_secondary, cpu: 1
[    0.205445] [Power/hotplug] SLAVE1_MAGIC_NUM:534c4131
[    0.205451] mt_wakeup_cpu: first boot!(1)
[    0.205477] Slave cpu init
[    0.205632] [Power/hotplug] platform_secondary_init, cpu: 1
[    0.265281] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.265298] [ca7_timer]generic_timer_setup entry
[    0.285393] SCHED: intersects new_mask: 4, cpu_active_mask: 3
[    0.290913] SCHED: intersects new_mask: 4, cpu_active_mask: 3
[    0.296502] Boot slave CPU
[    0.299026] [Power/hotplug] boot_secondary, cpu: 2
[    0.299034] [Power/hotplug] SLAVE2_MAGIC_NUM:4c415332
[    0.299040] mt_wakeup_cpu: first boot!(2)
[    0.299064] Slave cpu init
[    0.299073] [Power/hotplug] platform_secondary_init, cpu: 2
[    0.356573] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.356588] [ca7_timer]generic_timer_setup entry
[    0.376684] SCHED: intersects new_mask: 8, cpu_active_mask: 7
[    0.382205] SCHED: intersects new_mask: 8, cpu_active_mask: 7
[    0.387791] Boot slave CPU
[    0.390316] [Power/hotplug] boot_secondary, cpu: 3
[    0.390324] [Power/hotplug] SLAVE3_MAGIC_NUM:41534c33
[    0.390329] mt_wakeup_cpu: first boot!(3)
[    0.390354] Slave cpu init
[    0.390362] [Power/hotplug] platform_secondary_init, cpu: 3
[    0.447862] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.447877] [ca7_timer]generic_timer_setup entry
[    0.447962] Brought up 4 CPUs
[    0.447972] SMP: Total of 4 processors activated (8309.96 BogoMIPS).
[    0.447978] CPU: All CPU(s) started in SVC mode.
[    0.448690] devtmpfs: initialized
[    0.455769] NET: Registered protocol family 16
[    0.457706] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.457812] [PWRAP] common driver init, version $Revision$
[    0.458119] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.458130] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.459416] [SPM] PWAKE_EN:1, PCMWDT_EN:1, BYPASS_SYSPWREQ:0
[    0.459425] [SLP] SLEEP_DPIDLE_EN:1, REPLACE_DEF_WAKESRC:0, SUSPEND_LOG_EN:1
[    0.459951] [WDK]arch init check_bit=0xe+++++
[    0.459961] [WDK]arch init check_bit=0xf-----
[    0.463951] bio: create slab <bio-0> at 0
[    0.464591] SCSI subsystem initialized
[    0.464643] libata version 3.00 loaded.
[    0.464799] usbcore: registered new interface driver usbfs
[    0.464843] usbcore: registered new interface driver hub
[    0.464976] usbcore: registered new device driver usb
[    0.465062] pps_core: LinuxPPS API ver. 1 registered
[    0.465070] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.465090] PTP clock support registered
[    0.465606] Bluetooth: Core ver 2.16
[    0.465636] NET: Registered protocol family 31
[    0.465644] Bluetooth: HCI device and connection manager initialized
[    0.465661] Bluetooth: HCI socket layer initialized
[    0.465673] Bluetooth: L2CAP socket layer initialized
[    0.465684] Bluetooth: SCO socket layer initialized
[    0.465995] Switching to clocksource mt6582-gpt
[    0.466329] FS-Cache: Loaded
[    0.466473] CacheFiles: Loaded
[    0.467854] mt-rtc mt-rtc: rtc core: registered mt-rtc as rtc0
[    0.468509] eint register for 25
[    0.468531] ********** ldo status dump [1:ON,0:OFF]**********
[    0.468537] VRTC    =1, VA      =1, VCAMA   =0, VCAMD   =0
[    0.468549] VCAM_AF =1, VCAM_IO =0, VCN28   =0, VCN33   =0
[    0.468560] VCN_1V8 =0, VEMC_3V3=1, VGP1    =1, VGP2    =0
[    0.468571] VGP3    =0, VIBR    =0, VIO18   =1, VIO28   =1
[    0.468582] VM      =1, VMC     =1, VMCH    =1, VRF18   =1
[    0.468593] VSIM1   =0, VSIM2   =0, VTCXO   =1, VUSB    =1
[    0.468978] NET: Registered protocol family 2
[    0.469590] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.469815] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.470029] TCP: Hash tables configured (established 16384 bind 16384)
[    0.470087] TCP: reno registered
[    0.470101] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.470182] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.470503] NET: Registered protocol family 1
[    0.766573] GPT: iniit
[    0.766761] [BOOT] CHIP = 0x8590 0x8a00
[    0.766770] [Power/hotplug] mt_hotplug_mechanism_init
[    0.766882] Initialize EMI MPU.
[    0.767630] audit: initializing netlink socket (disabled)
[    0.767669] type=2000 audit(0.750:1): initialized
[    0.768288] @@@@@@ [compaction_init] Register early suspend callback @@@@@@
[    0.768357] bounce pool size: 64 pages
[    0.773830] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.774568] aufs 3.10.x-20141215
[    0.774592] msgmni has been set to 3497
[    0.778240] alg: No test for stdrng (krng)
[    0.804974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.805156] io scheduler noop registered
[    0.805166] io scheduler deadline registered
[    0.805204] io scheduler cfq registered (default)
[    0.805602] #################mediatek_gpio_init
[    0.805626] mediatek gpio driver initialized
[    0.806184] zram: Created 1 device(s) ...
[    0.809794] loop: module loaded
[    0.809830] [GCPU Kernel] [gcpu_init] [150] module init
[    0.809890] gpio_button: reset button gpio: 206, eint: 118
[    0.810069] input: gpio-buttons as /devices/virtual/input/input0
[    0.810092] eint register for 118
[    0.811105] eint register for 4
[    0.811846] [mtktscpu_init] [Power/CPU_Thermal] [Thermal calibration] temp0=0x7524f000, temp1=0x1e6f2, , temp2=0xdb5d200
[    0.822444] [Power/CPU_Thermal] [Thermal calibration] temp0=0x7524f000, temp1=0x1e6f2, , temp2=0xdb5d200
[    0.822454] [Power/CPU_Thermal] [Thermal calibration] g_adc_ge_t = 0x24f
[    0.822461] [Power/CPU_Thermal] [Thermal calibration] g_adc_oe_t = 0x1d4
[    0.822467] [Power/CPU_Thermal] [Thermal calibration] g_degc_cali = 0x2d
[    0.822473] [Power/CPU_Thermal] [Thermal calibration] g_adc_cali_en_t = 0x1
[    0.822479] [Power/CPU_Thermal] [Thermal calibration] g_o_slope = 0x0
[    0.822485] [Power/CPU_Thermal] [Thermal calibration] g_o_slope_sign = 0x0
[    0.822492] [Power/CPU_Thermal] [Thermal calibration] g_id = 0x0
[    0.822498] [Power/CPU_Thermal] [Thermal calibration] g_o_vtsmcu1 = 0xf2
[    0.822504] [Power/CPU_Thermal] [Thermal calibration] g_o_vtsmcu2 = 0xf3
[    0.822510] [Power/CPU_Thermal] [Thermal calibration] g_o_vtsabb = 0xe9
[    0.822518] [Power/CPU_Thermal] [Thermal calibration] g_ge       = 0xc0
[    0.828865] [Power/CPU_Thermal] [Thermal calibration] g_gain     = 0x27d0
[    0.835472] [Power/CPU_Thermal] [Thermal calibration] g_gain     = 0x27d0
[    0.842124] [Power/CPU_Thermal] [Thermal calibration] g_x_roomt1 = 0x2204
[    0.848754] [Power/CPU_Thermal] [Thermal calibration] g_x_roomt2 = 0x2207
[    0.855374] [Reset and init thermal controller]
[    0.859787] [Set_thermal_ctrl_trigger_SPM]: temperature=117000
[    0.866743] [Set_thermal_ctrl_trigger_SPM]: temperature=117000
[    0.872297] [mtktscpu_bind] binding OK, 0
[    0.872317] [mtktscpu_bind] binding OK, 1
[    0.872334] [mtktscpu_bind] binding OK, 2
[    0.872352] [mtktscpu_bind] binding OK, 3
[    0.872369] [mtktscpu_bind] binding OK, 4
[    0.872386] [mtktscpu_bind] binding OK, 5
[    0.872403] [mtktscpu_bind] binding OK, 6
[    0.872421] [mtktscpu_bind] binding OK, 7
[    0.872446] [mtktscpu_bind] binding OK, 8
[    0.872463] [mtktscpu_bind] binding OK, 9
[    0.872580] Power/PMIC_Thermal: Reg(0x63a)=0x2ec2, Reg(0x63c)=0xc00f
[    0.872602] Power/PMIC_Thermal: g_ver= 0x2023, g_o_vts = 0xf2e, g_degc_cali = 0x30, g_adc_cali_en = 0x1, g_o_slope = 0x0, g_o_slope_sign = 0x0, g_id = 0x1
[    0.872612] [Power/PMIC_Thermal] [Thermal calibration] SLOPE1=100000 SLOPE2=-171 INTERCEPT=440959, Vbe = -713000
[    0.886549] xLog: inited.
[    0.886645] logger: created 32K log 'logksystem'
[    0.886686] ****[mt_auxadc_driver] Initialization : DONE
[    0.886739] <HWMSEN> hwmsen_init
[    0.886774] <BATCHDEV> batch_init
[    0.887434] ******** MTK WDT driver probe!! ********
[    0.887443] ******** MTK WDT register irq ********
[    0.887465] mtk_wdt_probe : Success to request irq
[    0.887759] mtk_wdt_probe : Initialize to dual mode
[    0.888219]  mtk_wdt_mode_config  mode value=5c, tmp:2200005c,pid=1
[    0.888676] mtk_wdt_probe : done WDT_MODE(5c), MTK_WDT_DEGLITCH_EN(67d2a357)
[    0.888828] mtk_wdt_probe : done MTK_WDT_REQ_MODE(380003)
[    0.888980] mtk_wdt_probe : done MTK_WDT_REQ_IRQ_EN(380000)
[    0.889007] mtk_wdt_init ok
[    0.889207] i2c_common device init
[    0.892412] i2c_common device probe
[    0.896391] mtd_writeable success
[    0.896405] mtd_change success
[    0.896472] mtk_nor: Flash0 RDID: c22014
[    0.896479] mtk_nor: detected flash: MXIC(25L800)
[    0.896531] mtk_nor: Flash#0: write protect disable successfully!
[    0.896549] 2 cmdlinepart partitions found on MTD device mtk-nor0
[    0.896557] Creating 2 MTD partitions on "mtk-nor0":
[    0.896569] 0x000000000000-0x000000010000 : "EEPROM"
[    0.897456] 0x000000010000-0x000000100000 : "EXT"
[    0.898313] rdm_major = 263
[    0.898791] GMAC1_MAC_ADRH -- : 0x0000b6fb
[    0.898798] GMAC1_MAC_ADRL -- : 0xe42a996d
[    0.898837] Ralink APSoC Ethernet Driver Initilization. v3.1  256 rx/tx descriptors allocated, mtu = 1500!
[    0.899518] GMAC1_MAC_ADRH -- : 0x0000b6fb
[    0.899524] GMAC1_MAC_ADRL -- : 0xe42a996d
[    0.899965] PROC INIT OK!
[    0.902474] usbcore: registered new interface driver cdc_acm
[    0.902483] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.902490] ***mtk_u3h_init: port0***
[    0.902578] ***mtk_u3h_init: port1***
[    0.902642] *** mtk_u3h_phy_init ***
[    0.902649] phy registers and operations initial done
[    0.902655] *** USB port0 slew rate calibration ***
[    0.902666] Port0 FM_OUT value: u4FmOut = 0(0x00000000)
[    0.916073] Port0 FM_OUT value: u4FmOut = 0(0x00000000)
[    0.936071] Port0 FM_OUT value: u4FmOut = 0(0x00000000)
[    0.956069] Port0 FM_OUT value: u4FmOut = 0(0x00000000)
[    0.976058] Port0 FM_OUT value: u4FmOut = 0(0x00000000)
[    0.996120] Port0 FM_OUT value: u4FmOut = 0(0x00000000)
[    1.016074] Port0 FM_OUT value: u4FmOut = 0(0x00000000)
[    1.036070] Port0 FM_OUT value: u4FmOut = 0(0x00000000)
[    1.056069] Port0 FM_OUT value: u4FmOut = 0(0x00000000)
[    1.076069] Port0 FM_OUT value: u4FmOut = 0(0x00000000)
[    1.116069] *** USB port1 slew rate calibration ***
[    1.116077] === USB port0 phy init ===
[    1.116085] === USB port1 phy init ===
[    1.116138] ************ xhci_plat_probe ************
[    1.136093] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    1.136124] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[    1.138670] Execute recovery function!
[    1.138717] xhci-hcd xhci-hcd.0: irq 228, io mem 0x1a1c0000
[    1.138799] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.138810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.138820] usb usb1: Product: xHCI Host Controller
[    1.138829] usb usb1: Manufacturer: Linux 3.10.20-ubnt-mtk xhci-hcd
[    1.138838] usb usb1: SerialNumber: xhci-hcd.0
[    1.139256] xHCI xhci_add_endpoint called for root hub
[    1.139266] xHCI xhci_check_bandwidth called for root hub
[    1.139387] hub 1-0:1.0: USB hub found
[    1.139416] hub 1-0:1.0: 1 port detected
[    1.139588] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    1.139615] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[    1.139688] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.139699] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.139709] usb usb2: Product: xHCI Host Controller
[    1.139719] usb usb2: Manufacturer: Linux 3.10.20-ubnt-mtk xhci-hcd
[    1.139728] usb usb2: SerialNumber: xhci-hcd.0
[    1.140056] xHCI xhci_add_endpoint called for root hub
[    1.140065] xHCI xhci_check_bandwidth called for root hub
[    1.140176] hub 2-0:1.0: USB hub found
[    1.140195] hub 2-0:1.0: 1 port detected
[    1.140360] ************ xhci_plat_probe ************
[    1.156108] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    1.156136] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[    1.158300] Execute recovery function!
[    1.158346] xhci-hcd xhci-hcd.1: irq 229, io mem 0x1a240000
[    1.158416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.158429] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.158439] usb usb3: Product: xHCI Host Controller
[    1.158448] usb usb3: Manufacturer: Linux 3.10.20-ubnt-mtk xhci-hcd
[    1.158457] usb usb3: SerialNumber: xhci-hcd.1
[    1.158792] xHCI xhci_add_endpoint called for root hub
[    1.158801] xHCI xhci_check_bandwidth called for root hub
[    1.158905] hub 3-0:1.0: USB hub found
[    1.158926] hub 3-0:1.0: 1 port detected
[    1.159076] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    1.159096] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[    1.159163] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.159174] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.159183] usb usb4: Product: xHCI Host Controller
[    1.159193] usb usb4: Manufacturer: Linux 3.10.20-ubnt-mtk xhci-hcd
[    1.159202] usb usb4: SerialNumber: xhci-hcd.1
[    1.159485] xHCI xhci_add_endpoint called for root hub
[    1.159493] xHCI xhci_check_bandwidth called for root hub
[    1.159592] hub 4-0:1.0: USB hub found
[    1.159616] hub 4-0:1.0: 1 port detected
[    1.160284] device-mapper: uevent: version 1.0.3
[    1.160528] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
[    1.160857] usbcore: registered new interface driver usbhid
[    1.160867] usbhid: USB HID core driver
[    1.160944] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.161568] gre: GRE over IPv4 demultiplexor driver
[    1.161579] ip_gre: GRE over IPv4 tunneling driver
[    1.162639] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.162650] Type=Linux
[    1.162716] TCP: cubic registered
[    1.162723] Initializing XFRM netlink socket
[    1.163172] NET: Registered protocol family 10
[    1.164123] sit: IPv6 over IPv4 tunneling driver
[    1.165166] NET: Registered protocol family 17
[    1.165202] NET: Registered protocol family 15
[    1.165298] l2tp_core: L2TP core driver, V2.0
[    1.165306] 8021q: 802.1Q VLAN Support v1.8
[    1.165469] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    1.165488] ThumbEE CPU extension supported.
[    1.165511] Registering SWP/SWPB emulation handler
[    1.165571] ETH already turn on and power on flow will be skipped...
[    1.165578] HIF already turn on and power on flow will be skipped...
[    1.165689] mtk-uart.0: ttyMT0 at MMIO 0x11002000 (irq = 83) is a MTK UART
[    1.165969] [ 0] ee800000 (1024) ;[ 1] ee801000 (1024) ;
[    1.165994] register uart device
[    1.166152] mtk-uart.1: ttyMT1 at MMIO 0x11003000 (irq = 84) is a MTK UART
[    1.166397] [ 2] ee802000 (8192) ;[ 3] ee804000 (8192) ;
[    1.166437] register uart device
[    1.166520] mtk-uart.2: ttyMT2 at MMIO 0x11004000 (irq = 85) is a MTK UART
[    1.166746] [ 4] ee806000 (8192) ;[ 5] ee808000 (8192) ;
[    1.166786] register uart device
[    1.166866] mtk-uart.3: ttyMT3 at MMIO 0x11005000 (irq = 86) is a MTK UART
[    1.167060] [UART 3] not support VFF, Cancel alloc
[    1.167070] register uart device
[    1.228220] eint register for 146
[    1.229250] Now driver waits for card removal, but removal state is (0) (high voltage), so we invert it
[    1.229260] SD card insert(0:1)mtk_device_btif register ret 0register MTK_SMI device
[    1.276453] wait for emi frequency meter finish, CLK26CALI = 0x81
[    1.287220] [Power/CPU_Thermal] freqs[0].cpufreq_khz=1300000, .cpufreq_ncpu=4, .cpufreq_power=1375
[    1.287231] [Power/CPU_Thermal] freqs[1].cpufreq_khz=1196000, .cpufreq_ncpu=4, .cpufreq_power=1074
[    1.287239] [Power/CPU_Thermal] freqs[2].cpufreq_khz=1040000, .cpufreq_ncpu=4, .cpufreq_power=892
[    1.287247] [Power/CPU_Thermal] freqs[3].cpufreq_khz=1196000, .cpufreq_ncpu=3, .cpufreq_power=848
[    1.287255] [Power/CPU_Thermal] freqs[4].cpufreq_khz=747500, .cpufreq_ncpu=4, .cpufreq_power=719
[    1.287263] [Power/CPU_Thermal] freqs[5].cpufreq_khz=1040000, .cpufreq_ncpu=3, .cpufreq_power=701
[    1.287271] [Power/CPU_Thermal] freqs[6].cpufreq_khz=598000, .cpufreq_ncpu=4, .cpufreq_power=630
[    1.287279] [Power/CPU_Thermal] freqs[7].cpufreq_khz=1196000, .cpufreq_ncpu=2, .cpufreq_power=623
[    1.287287] [Power/CPU_Thermal] freqs[8].cpufreq_khz=747500, .cpufreq_ncpu=3, .cpufreq_power=568
[    1.287295] [Power/CPU_Thermal] freqs[9].cpufreq_khz=1300000, .cpufreq_ncpu=1, .cpufreq_power=549
[    1.287303] [Power/CPU_Thermal] freqs[10].cpufreq_khz=1040000, .cpufreq_ncpu=2, .cpufreq_power=509
[    1.287311] [Power/CPU_Thermal] freqs[11].cpufreq_khz=598000, .cpufreq_ncpu=3, .cpufreq_power=500
[    1.287319] [Power/CPU_Thermal] freqs[12].cpufreq_khz=747500, .cpufreq_ncpu=2, .cpufreq_power=417
[    1.287327] [Power/CPU_Thermal] freqs[13].cpufreq_khz=1196000, .cpufreq_ncpu=1, .cpufreq_power=397
[    1.287335] [Power/CPU_Thermal] freqs[14].cpufreq_khz=598000, .cpufreq_ncpu=2, .cpufreq_power=370
[    1.287343] [Power/CPU_Thermal] freqs[15].cpufreq_khz=1040000, .cpufreq_ncpu=1, .cpufreq_power=318
[    1.287351] [Power/CPU_Thermal] freqs[16].cpufreq_khz=747500, .cpufreq_ncpu=1, .cpufreq_power=266
[    1.287359] [Power/CPU_Thermal] freqs[17].cpufreq_khz=598000, .cpufreq_ncpu=1, .cpufreq_power=239
[    1.308254] mt-gpio-rfkill mt-gpio-rfkill: registered 'bt' rfkill device (20:19)
[    1.308674] mtk_nfc_6605_dev register ret 0[APDMA] Init APDMA OK
[    1.309122] registered taskstats version 1
[    1.309722] p[1]=80262064
[    1.309731] p[2]=80262040
[    1.309736] p[3]=80262024
[    1.309741] p[4]=80262008
[    1.309746] p[5]=80261fc8
[    1.309750] p[6]=80261f94
[    1.309755] p[7]=80261f0c
[    1.309760] p[8]=80261fb0
[    1.309765] p[9]=802621c4
[    1.309770] p[10]=80261f7c
[    1.309775] p[11]=80261f68
[    1.309779] p[12]=80261f54
[    1.309784] p[13]=80261f40
[    1.309789] p[14]=80261f2c
[    1.309794] p[15]=80262148
[    1.309799] p[16]=802620e8
[    1.309804] p[17]=802621a0
[    1.309809] p[18]=8026207c
[    1.310890] mmc0: BKOPS_EN bit is not set
[    1.316588] mmc0: new high speed MMC card at address 0001
[    1.316997] mmcblk0: mmc0:0001 016G70 14.6 GiB
[    1.317275] mmcblk0boot0: mmc0:0001 016G70 partition 1 4.00 MiB
[    1.317474] mmcblk0boot1: mmc0:0001 016G70 partition 2 4.00 MiB
[    1.317622] mmcblk0rpmb: mmc0:0001 016G70 partition 3 4.00 MiB
[    1.317633] [mmc_blk_probe]: mmcblk0 by manufacturer settings, quirks=0x0
[    1.322190]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    1.324491]  mmcblk0boot1: unknown partition table
[    1.325628]  mmcblk0boot0: unknown partition table
[    1.356458] mt-rtc mt-rtc: setting system clock to 2020-07-06 01:19:08 UTC (1593998348)
[    1.356610] Warning: unable to open an initial console.
[    1.368120] Freeing unused kernel memory: 4876K (805e7000 - 80aaa000)
[    1.391519] mmc1: new high speed SDHC card at address 0007
[    1.391910] mmcblk1: mmc1:0007 SD08G 7.42 GiB
[    1.391922] [mmc_blk_probe]: mmcblk1 by manufacturer settings, quirks=0x0
[    1.398437]  mmcblk1: p1
[    1.816157] usb 3-1: new full-speed USB device number 2 using xhci-hcd
[    1.837148] usb 3-1: New USB device found, idVendor=0cf3, idProduct=3004
[    1.837174] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.837593] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 1, isTT 0           , ep_type 3, maxp 16, interval 8, burst 0, mult 0, ep 0xed95ea80, ep_ctx 0xeea0b080
[    1.837608] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
[    1.837616] [DBG] BOFFSET: 0, BREPEAT: 0
[    1.838087] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 1, isTT 0           , ep_type 2, maxp 64, interval 1, burst 0, mult 0, ep 0xed95eaac, ep_ctx 0xeea0b0c0
[    1.838106] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
[    1.838116] [DBG] BOFFSET: 0, BREPEAT: 0
[    1.838319] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 0, isTT 0           , ep_type 2, maxp 64, interval 1, burst 0, mult 0, ep 0xed95ead8, ep_ctx 0xeea0b0a0
[    1.838333] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
[    1.838342] [DBG] BOFFSET: 0, BREPEAT: 0
[    1.838366] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 1, isTT 0           , ep_type 1, maxp 0, interval 8, burst 0, mult 0, ep 0xed586000, ep_ctx 0xeea0b100
[    1.838373] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
[    1.838378] [DBG] BOFFSET: 0, BREPEAT: 0
[    1.838561] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 0, isTT 0           , ep_type 1, maxp 0, interval 8, burst 0, mult 0, ep 0xed58602c, ep_ctx 0xeea0b0e0
[    1.838575] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
[    1.838580] [DBG] BOFFSET: 0, BREPEAT: 0
[    1.839513]

Unsupported Device!
Vendor=cf3 ProdID=3004
Manufacturer= Product=

[    2.812729] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[   14.594500] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[   56.140131] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[   56.157208] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   56.157716] systemd[1]: Detected architecture arm.
[   56.164085] systemd[1]: Set hostname to <UniFi-CloudKey>.
[   56.458788] systemd[1]: Created slice System Slice.
[   56.459765] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   56.460055] systemd[1]: Listening on LVM2 metadata daemon socket.
[   56.460322] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   56.460581] systemd[1]: Listening on udev Control Socket.
[   56.460682] systemd[1]: Reached target Remote File Systems (Pre).
[   56.460745] systemd[1]: Reached target Swap.
[   56.461333] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   56.461852] systemd[1]: Created slice system-getty.slice.
[   56.461943] systemd[1]: Reached target Remote File Systems.
[   56.462178] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   56.462275] systemd[1]: Reached target Bluetooth.
[   56.462600] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   56.462785] systemd[1]: Listening on fsck to fsckd communication Socket.
[   56.463093] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   56.463175] systemd[1]: Reached target Paths.
[   56.463757] systemd[1]: Created slice system-systemd\x2dnetworkd\x2dfallbacker.slice.
[   56.464434] systemd[1]: Listening on Network Service Netlink Socket.
[   56.464931] systemd[1]: Created slice User and Session Slice.
[   56.465021] systemd[1]: Reached target Slices.
[   56.465828] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   56.466354] systemd[1]: Listening on Journal Socket (/dev/log).
[   56.466655] systemd[1]: Listening on Journal Socket.
[   56.469462] systemd[1]: Starting Journal Service...
[   56.475988] systemd[1]: Starting Load Kernel Modules...
[   56.483044] systemd[1]: Starting Remount Root and Kernel File Systems...
[   56.486644] systemd[1]: Mounting POSIX Message Queue File System...
[   56.515855] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   56.516282] systemd[1]: Listening on udev Kernel Socket.
[   56.517614] systemd[1]: Created slice system-systemd\x2dnetworkd\x2dprestart.slice.
[   56.528850] systemd[1]: Started Remount Root and Kernel File Systems.
[   56.539546] systemd[1]: Starting udev Coldplug all Devices...
[   56.543152] systemd[1]: Starting Load/Save Random Seed...
[   56.584283] systemd[1]: Mounted POSIX Message Queue File System.
[   56.593637] systemd[1]: Started Load Kernel Modules.
[   56.595045] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   56.599670] systemd[1]: Starting Create Static Device Nodes in /dev...
[   56.603623] systemd[1]: Starting Apply Kernel Variables...
[   56.613278] systemd[1]: Mounting Configuration File System...
[   56.638752] systemd[1]: Started Load/Save Random Seed.
[   56.661961] systemd[1]: Started Create Static Device Nodes in /dev.
[   56.663111] systemd[1]: Reached target Local File Systems (Pre).
[   56.663444] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[   56.666420] systemd[1]: Mounting /tmp...
[   56.671488] systemd[1]: Starting udev Kernel Device Manager...
[   56.700032] systemd[1]: Started Apply Kernel Variables.
[   56.709092] systemd[1]: Mounted Configuration File System.
[   56.730588] systemd[1]: Mounted /tmp.
[   56.751944] systemd[1]: Started Journal Service.
[   56.802240] systemd-journald[3201]: Received request to flush runtime journal from PID 1
[   57.451682] usbcore: registered new interface driver btusb
[   57.541372] usb 3-1: USB disconnect, device number 2
[   57.898225] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[   57.922905] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[   62.536095] Stopped on Transfer TRB
[   62.536287] usbcore: registered new interface driver ath3k
[   62.816169] usb 3-1: new full-speed USB device number 3 using xhci-hcd
[   63.146732] Raeth v3.1 (Tasklet)
[   63.147046] phy_free_head is 0xee80c000!!!
[   63.147061] phy_free_tail_phy is 0xee80dff0!!!
[   63.147072] txd_pool=ee80e000 phy_txd_pool=EE80E000
[   63.147078] ei_local->skb_free start address is 0xee278cdc.
[   63.147128] free_txd: ee80e010, ei_local->cpu_ptr: EE80E000
[   63.147133]  POOL  HEAD_PTR | DMA_PTR | CPU_PTR
[   63.147137] ----------------+---------+--------
[   63.147144]      0xee80e000 0xEE80E000 0xEE80E000
[   63.147355]
phy_qrx_ring = 0xee80f000, qrx_ring = 0xee80f000
[   63.147568]
phy_rx_ring0 = 0xee810000, rx_ring0 = 0xee810000
[   63.147584] Enable QDMA TX NDP coherence check and re-read mechanism
[   63.147593] ***********QDMA_GLO_CFG=80001c65
[   63.366105] change HW-TRAP to 0x15e8f
[   63.655109] GMAC1_MAC_ADRH -- : 0x0000b6fb
[   63.655124] GMAC1_MAC_ADRL -- : 0xe42a996d
[   63.655130] eint register for 168
[   63.683412] GDMA2_MAC_ADRH -- : 0x0000b4fb
[   63.683426] GDMA2_MAC_ADRL -- : 0xe42a996d
[   63.684026] eth0: ===> VirtualIF_open
[   63.684042] CDMA_CSG_CFG = 81000000
[   63.684047] GDMA1_FWD_CFG = 20710000
[   63.684052] GDMA2_FWD_CFG = 20710000
[   63.792890] eth0: ===> VirtualIF_open
[   63.793322] eth0: ===> VirtualIF_close
[   63.793999] eth0: ===> VirtualIF_open
[   66.931550] MT7623 GE2 link rate to 10M/1G
[   69.557614] warning: `jsvc' uses 32-bit capabilities (legacy support in use)
[   73.236160] usb 3-1: device not accepting address 3, error -62
[   73.356206] usb 3-1: new full-speed USB device number 4 using xhci-hcd
[   73.377218] usb 3-1: New USB device found, idVendor=0cf3, idProduct=3004
[   73.377243] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   73.377801] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 1, isTT 0           , ep_type 3, maxp 16, interval 8, burst 0, mult 0, ep 0xed943180, ep_ctx 0xeea0a080
[   73.377821] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
[   73.377830] [DBG] BOFFSET: 0, BREPEAT: 0
[   73.377857] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 1, isTT 0           , ep_type 2, maxp 64, interval 1, burst 0, mult 0, ep 0xed9431ac, ep_ctx 0xeea0a0c0
[   73.377868] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
[   73.377877] [DBG] BOFFSET: 0, BREPEAT: 0
[   73.377902] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 0, isTT 0           , ep_type 2, maxp 64, interval 1, burst 0, mult 0, ep 0xed9431d8, ep_ctx 0xeea0a0a0
[   73.377914] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
[   73.377923] [DBG] BOFFSET: 0, BREPEAT: 0
[   73.377949] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 1, isTT 0           , ep_type 1, maxp 0, interval 8, burst 0, mult 0, ep 0xedb8f580, ep_ctx 0xeea0a100
[   73.377961] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
[   73.377970] [DBG] BOFFSET: 0, BREPEAT: 0
[   73.377992] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 0, isTT 0           , ep_type 1, maxp 0, interval 8, burst 0, mult 0, ep 0xedb8f5ac, ep_ctx 0xeea0a0e0
[   73.378004] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
[   73.378013] [DBG] BOFFSET: 0, BREPEAT: 0
[  236.565412] eth0: ===> VirtualIF_close
[  236.567656] eth0: ===> VirtualIF_open