Forked from meirbon/Dell XPS 15 9560 Manjaro Setup instructions
Created
March 27, 2019 13:18
-
-
Save AkashRajvanshi/3c790e69977676817cfb0bb03dbd65fc to your computer and use it in GitHub Desktop.
Small, quick guide to set up Manjaro on the XPS 15 9560
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# 1. First of all of course get Manjaro: | |
https://manjaro.org/get-manjaro/ | |
# I recommend using Etcher to copy the image to your USB: | |
https://etcher.io/ | |
# 2. Before installing make sure: | |
# - Secure boot is disabled in BIOS | |
# - Your SSD, HDD or NVME drive is set to AHCI instead of RAID | |
# - Fastboot should be on Auto or minimal, but this shouldn't matter to much | |
# 3. Once at the GRUB menu do the following (these steps are important, Manjaro won't even boot otherwise): | |
# - For drivers select the nonfree option instead of free, there is no support for Pascal GPUs yet (is planned for 4.12) | |
# - Hover over the option 'From stick/hdd' and press 'e' to edit the boot entry | |
# - Look for 'quiet' in the boot entry, after quiet you should type the following: | |
nouveau.modeset=0 nogpumanager pcie_aspm=off acpi_backlight=none acpi_osi=Linux acpi_osi=! | |
# It should now look something like this: | |
quiet nouvea.modeset=0 nogpumanager pcie_aspm=off acpi_backlight=none acpi_osi=Linux acpi_osi=! | |
# 4. Now just install Manjaro like you normally would. | |
# After install repeat step 3 as Manjaro will still not be bootable without | |
# 5. Once Manjaro is installed pretty much everything is set up already. | |
# Manjaro handles things like installing Bumblebee beautifully, but there is one more thing we should do. | |
# We need to add the boot arguments given in step 3. | |
# I recommend using something like grub-customizer (available from AUR or https://launchpad.net/grub-customizer) | |
# This is an UI for making Grub customizations | |
##### Using grub-customizer ##### | |
# - Open up grub-customizer | |
# - Go to the 'General settings' tab | |
# - and add the following after quiet: | |
quiet pcie_port_pm=off acpi_backlight=none acpi_osi=Linux acpi_osi=! acpi_osi='Windows 2009' | |
# Press 'ctrl + s' or click save and we are done. Your installation should be fully working now. | |
##### Using terminal ##### | |
# sudo nano /etc/default/grub | |
# Find this line and make sure it looks like this: | |
GRUB_CMDLINE_LINUX_DEFAULT="nouvea.modeset=0 nogpumanager pcie_aspm=off acpi_backlight=none acpi_osi=Linux acpi_osi=!" | |
# run | |
sudo update-grub2 # (or update-grub if update-grub2 is not symlinked) | |
# to update your Grub config and we are done. | |
# Some last notes | |
# I get around 5 to 8 hours of battery life on a i7, 16GB, 512GB 4k model 9560. | |
# Stay on kernel 4.9 (standard on Manjaro right now). | |
# I have tried 4.11, but it was hard-locking/freezing my XPS 15 every few minutes or wouldn't even boot up. | |
# 4.11 only adds NVME power management so we aren't missing out on anything. | |
# Once 4.12 hits I will test and update this guide, hoping there is better support for Pascal as well. | |
# Update as of May 2018 | |
# Latest install of Manjaro is possible using the exact same instructions. | |
# The current kernel version used by Manjaro is 4.14 and it seems to run fine. | |
# Update November 2018 | |
# I've updated the boot parameters as I found the originals didn't work for me anymore | |
# Additional notes | |
# (Thanks @Cznielsen) For the XPS 9570 it seems this flag is necessary 'systemd.mask=mhwd-live.service' | |
# (Thanks @Jonathancollinet) Some people needed this flag to boot Manjaro: 'acpi_rev_override=1' | |
# (Thanks @stucash) For fixing power management of the intel graphics use these parameters: 'i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 i915.i915_psr=1 drm.vblankoffdelay=1' | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment