Created
August 9, 2020 00:16
-
-
Save AkechiShiro/2bfa92237e9cafd1023679ae4e0246f4 to your computer and use it in GitHub Desktop.
tlp-stat full output
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
--- TLP 1.3.1 -------------------------------------------- | |
+++ Configured Settings: | |
/etc/tlp.conf L0015: TLP_ENABLE="1" | |
/etc/tlp.conf L0025: TLP_PERSISTENT_DEFAULT="0" | |
/etc/tlp.conf L0030: DISK_IDLE_SECS_ON_AC="0" | |
/etc/tlp.conf L0031: DISK_IDLE_SECS_ON_BAT="2" | |
/etc/tlp.conf L0035: MAX_LOST_WORK_SECS_ON_AC="15" | |
/etc/tlp.conf L0036: MAX_LOST_WORK_SECS_ON_BAT="60" | |
defaults.conf L0010: CPU_ENERGY_PERF_POLICY_ON_AC="balance_performance" | |
defaults.conf L0011: CPU_ENERGY_PERF_POLICY_ON_BAT="balance_power" | |
/etc/tlp.conf L0097: SCHED_POWERSAVE_ON_AC="0" | |
/etc/tlp.conf L0098: SCHED_POWERSAVE_ON_BAT="1" | |
/etc/tlp.conf L0103: NMI_WATCHDOG="0" | |
/etc/tlp.conf L0124: DISK_DEVICES="nvme0n1 sda" | |
/etc/tlp.conf L0131: DISK_APM_LEVEL_ON_AC="254 254" | |
/etc/tlp.conf L0132: DISK_APM_LEVEL_ON_BAT="254 254" | |
defaults.conf L0018: DISK_IOSCHED="keep keep" | |
/etc/tlp.conf L0166: SATA_LINKPWR_ON_AC="max_performance max_performance" | |
/etc/tlp.conf L0167: SATA_LINKPWR_ON_BAT="max_performance max_performance" | |
/etc/tlp.conf L0184: AHCI_RUNTIME_PM_TIMEOUT="15" | |
defaults.conf L0022: PCIE_ASPM_ON_AC="default" | |
defaults.conf L0023: PCIE_ASPM_ON_BAT="default" | |
/etc/tlp.conf L0207: RADEON_POWER_PROFILE_ON_AC="default" | |
/etc/tlp.conf L0208: RADEON_POWER_PROFILE_ON_BAT="default" | |
/etc/tlp.conf L0218: RADEON_DPM_PERF_LEVEL_ON_AC="auto" | |
/etc/tlp.conf L0219: RADEON_DPM_PERF_LEVEL_ON_BAT="auto" | |
/etc/tlp.conf L0223: WIFI_PWR_ON_AC="off" | |
/etc/tlp.conf L0224: WIFI_PWR_ON_BAT="on" | |
/etc/tlp.conf L0228: WOL_DISABLE="Y" | |
/etc/tlp.conf L0233: SOUND_POWER_SAVE_ON_AC="0" | |
/etc/tlp.conf L0234: SOUND_POWER_SAVE_ON_BAT="1" | |
/etc/tlp.conf L0239: SOUND_POWER_SAVE_CONTROLLER="Y" | |
/etc/tlp.conf L0246: BAY_POWEROFF_ON_AC="0" | |
/etc/tlp.conf L0247: BAY_POWEROFF_ON_BAT="0" | |
/etc/tlp.conf L0250: BAY_DEVICE="sr0" | |
/etc/tlp.conf L0254: RUNTIME_PM_ON_AC="on" | |
/etc/tlp.conf L0255: RUNTIME_PM_ON_BAT="auto" | |
defaults.conf L0039: RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon" | |
/etc/tlp.conf L0272: USB_AUTOSUSPEND="1" | |
/etc/tlp.conf L0283: USB_BLACKLIST_BTUSB="0" | |
/etc/tlp.conf L0288: USB_BLACKLIST_PHONE="0" | |
/etc/tlp.conf L0293: USB_BLACKLIST_PRINTER="1" | |
/etc/tlp.conf L0298: USB_BLACKLIST_WWAN="0" | |
defaults.conf L0045: USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN="0" | |
/etc/tlp.conf L0315: RESTORE_DEVICE_STATE_ON_STARTUP="0" | |
defaults.conf L0047: RESTORE_THRESHOLDS_ON_BAT="0" | |
/etc/tlp.conf L0368: NATACPI_ENABLE="1" | |
/etc/tlp.conf L0369: TPACPI_ENABLE="1" | |
/etc/tlp.conf L0370: TPSMAPI_ENABLE="1" | |
/etc/tlp.conf L0020: TLP_DEFAULT_MODE="AC" | |
/etc/tlp.conf L0072: CPU_HWP_ON_AC="balance_performance" | |
/etc/tlp.conf L0073: CPU_HWP_ON_BAT="balance_power" | |
/etc/tlp.conf L0117: ENERGY_PERF_POLICY_ON_AC="performance" | |
/etc/tlp.conf L0118: ENERGY_PERF_POLICY_ON_BAT="power" | |
/etc/tlp.conf L0212: RADEON_DPM_STATE_ON_AC="performance" | |
/etc/tlp.conf L0213: RADEON_DPM_STATE_ON_BAT="battery" | |
+++ System Info | |
System = LENOVO ThinkPad T450 20BUS60E00 | |
BIOS = JBET73WW (1.37 ) | |
Release = Pop!_OS 20.04 LTS | |
Kernel = 5.4.0-7634-generic #38~1596560323~20.04~7719dbd-Ubuntu SMP Tue Aug 4 19:12:34 UTC 2 x86_64 | |
/proc/cmdline = initrd=\EFI\Pop_OS-a83cb288-f7b9-4285-8fb1-f51ef9abe8b8\initrd.img root=UUID=a83cb288-f7b9-4285-8fb1-f51ef9abe8b8 ro quiet loglevel=0 systemd.show_status=false splash | |
Init system = systemd v245 (245.4-4ubuntu3.2pop1~1596049172~20.04~c9d8f2b) | |
Boot mode = UEFI | |
+++ TLP Status | |
State = enabled | |
RDW state = enabled | |
Last run = 01:55:46, 1123 sec(s) ago | |
Mode = AC | |
Power source = AC | |
Notice: tlp.service is not enabled -- invoke "systemctl enable tlp.service" to correct this! | |
+++ Processor | |
CPU model = Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz | |
/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = intel_pstate | |
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = powersave | |
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = performance powersave | |
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 500000 [kHz] | |
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 3200000 [kHz] | |
/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = intel_pstate | |
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = powersave | |
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_governors = performance powersave | |
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 500000 [kHz] | |
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 3200000 [kHz] | |
/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver = intel_pstate | |
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor = powersave | |
/sys/devices/system/cpu/cpu2/cpufreq/scaling_available_governors = performance powersave | |
/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq = 500000 [kHz] | |
/sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq = 3200000 [kHz] | |
/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver = intel_pstate | |
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor = powersave | |
/sys/devices/system/cpu/cpu3/cpufreq/scaling_available_governors = performance powersave | |
/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq = 500000 [kHz] | |
/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq = 3200000 [kHz] | |
/sys/devices/system/cpu/intel_pstate/min_perf_pct = 15 [%] | |
/sys/devices/system/cpu/intel_pstate/max_perf_pct = 100 [%] | |
/sys/devices/system/cpu/intel_pstate/no_turbo = 0 | |
/sys/devices/system/cpu/intel_pstate/turbo_pct = 25 [%] | |
/sys/devices/system/cpu/intel_pstate/num_pstates = 28 | |
/sys/devices/system/cpu/cpu0/power/energy_perf_bias = 4 (balance_performance) [EPB] | |
/sys/devices/system/cpu/cpu1/power/energy_perf_bias = 4 (balance_performance) [EPB] | |
/sys/devices/system/cpu/cpu2/power/energy_perf_bias = 4 (balance_performance) [EPB] | |
/sys/devices/system/cpu/cpu3/power/energy_perf_bias = 4 (balance_performance) [EPB] | |
/sys/module/workqueue/parameters/power_efficient = Y | |
/proc/sys/kernel/nmi_watchdog = 0 | |
+++ Temperatures | |
/proc/acpi/ibm/thermal = 50 0 0 0 0 0 0 0 [°C] | |
/proc/acpi/ibm/fan = 0 [/min] | |
+++ File System | |
/proc/sys/vm/laptop_mode = 0 | |
/proc/sys/vm/dirty_writeback_centisecs = 1500 | |
/proc/sys/vm/dirty_expire_centisecs = 1500 | |
/proc/sys/vm/dirty_ratio = 20 | |
/proc/sys/vm/dirty_background_ratio = 10 | |
+++ Storage Devices | |
Devices = nvme0n1 sda | |
/dev/nvme0n1: not present. | |
/dev/sda: | |
Type = ATA | |
Model = CT500MX500SSD1 | |
Firmware = M3CR023 | |
APM Level = 254 | |
Status = active/idle | |
TRIM = supported | |
Scheduler = [mq-deadline] none (multi queue) | |
Runtime PM: control = on, autosuspend_delay_ms = -1 | |
SMART info: | |
9 Power_On_Hours = 2728 [h] | |
12 Power_Cycle_Count = 1554 | |
194 Temperature_Celsius = 41 (Min/Max 0/55) [°C] | |
246 Total_LBAs_Written = 1.761 [TB] | |
+++ AHCI Link Power Management (ALPM) | |
/sys/class/scsi_host/host0/link_power_management_policy = max_performance | |
/sys/class/scsi_host/host1/link_power_management_policy = max_performance | |
/sys/class/scsi_host/host2/link_power_management_policy = max_performance | |
+++ AHCI Host Controller Runtime Power Management | |
/sys/bus/pci/devices/0000:00:1f.2/ata1/power/control = on | |
/sys/bus/pci/devices/0000:00:1f.2/ata2/power/control = on | |
/sys/bus/pci/devices/0000:00:1f.2/ata3/power/control = on | |
+++ Docks and Device Bays | |
/sys/devices/platform/dock.0: battery_bay = battery present | |
+++ Intel Graphics | |
/sys/module/i915/parameters/enable_dc = -1 (use per-chip default) | |
/sys/module/i915/parameters/enable_fbc = 1 (enabled) | |
/sys/module/i915/parameters/enable_psr = 0 (disabled) | |
/sys/module/i915/parameters/modeset = -1 (use per-chip default) | |
/sys/class/drm/card0/gt_min_freq_mhz = 300 [MHz] | |
/sys/class/drm/card0/gt_max_freq_mhz = 950 [MHz] | |
/sys/class/drm/card0/gt_boost_freq_mhz = 950 [MHz] | |
/sys/kernel/debug/dri/0/i915_ring_freq_table: 300 350 400 450 500 550 600 650 700 750 800 850 900 950 [MHz] | |
+++ Wireless | |
bluetooth = on | |
wifi = on | |
wwan = none (no device) | |
hci0(btusb) : bluetooth, connected | |
wlp3s0(iwlwifi) : wifi, connected, power management = off | |
+++ Audio | |
/sys/module/snd_hda_intel/parameters/power_save = 0 | |
/sys/module/snd_hda_intel/parameters/power_save_controller = N | |
+++ PCIe Active State Power Management | |
/sys/module/pcie_aspm/parameters/policy = [default] performance powersave powersupersave (using BIOS preferences) | |
+++ Runtime Power Management | |
Device blacklist = (not configured) | |
Driver blacklist = amdgpu mei_me nouveau nvidia pcieport radeon | |
/sys/bus/pci/devices/0000:00:00.0/power/control = on (0x060000, Host bridge, bdw_uncore) | |
/sys/bus/pci/devices/0000:00:02.0/power/control = on (0x030000, VGA compatible controller, i915) | |
/sys/bus/pci/devices/0000:00:03.0/power/control = on (0x040300, Audio device, snd_hda_intel) | |
/sys/bus/pci/devices/0000:00:14.0/power/control = on (0x0c0330, USB controller, xhci_hcd) | |
/sys/bus/pci/devices/0000:00:16.0/power/control = on (0x078000, Communication controller, mei_me) | |
/sys/bus/pci/devices/0000:00:19.0/power/control = on (0x020000, Ethernet controller, e1000e) | |
/sys/bus/pci/devices/0000:00:1b.0/power/control = on (0x040300, Audio device, snd_hda_intel) | |
/sys/bus/pci/devices/0000:00:1c.0/power/control = auto (0x060400, PCI bridge, pcieport) | |
/sys/bus/pci/devices/0000:00:1c.1/power/control = auto (0x060400, PCI bridge, pcieport) | |
/sys/bus/pci/devices/0000:00:1d.0/power/control = on (0x0c0320, USB controller, ehci-pci) | |
/sys/bus/pci/devices/0000:00:1f.0/power/control = on (0x060100, ISA bridge, lpc_ich) | |
/sys/bus/pci/devices/0000:00:1f.2/power/control = on (0x010601, SATA controller, ahci) | |
/sys/bus/pci/devices/0000:00:1f.3/power/control = on (0x0c0500, SMBus, i801_smbus) | |
/sys/bus/pci/devices/0000:00:1f.6/power/control = on (0x118000, Signal processing controller, intel_pch_thermal) | |
/sys/bus/pci/devices/0000:02:00.0/power/control = on (0xff0000, Unassigned class [ff00], rtsx_pci) | |
/sys/bus/pci/devices/0000:03:00.0/power/control = on (0x028000, Network controller, iwlwifi) | |
+++ USB | |
Autosuspend = enabled | |
Device whitelist = (not configured) | |
Device blacklist = (not configured) | |
Bluetooth blacklist = disabled | |
Phone blacklist = disabled | |
WWAN blacklist = disabled | |
Bus 001 Device 002 ID 8087:8001 control = auto, autosuspend_delay_ms = 0 -- Intel Corp. (hub) | |
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub) | |
Bus 003 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 3.0 root hub (hub) | |
Bus 002 Device 004 ID 5986:0366 control = auto, autosuspend_delay_ms = 2000 -- Acer, Inc Integrated Camera (uvcvideo) | |
Bus 002 Device 003 ID 8087:0a2a control = auto, autosuspend_delay_ms = 2000 -- Intel Corp. (btusb) | |
Bus 002 Device 002 ID 058f:9540 control = auto, autosuspend_delay_ms = 2000 -- Alcor Micro Corp. AU9540 Smartcard Reader (no driver) | |
Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub) | |
+++ Battery Features: Charge Thresholds and Recalibrate | |
natacpi = active (data, thresholds) | |
tpacpi-bat = active (recalibrate) | |
tp-smapi = inactive (ThinkPad not supported) | |
+++ ThinkPad Battery Status: BAT1 (Ultrabay / Slice / Replaceable) | |
/sys/class/power_supply/BAT1/manufacturer = SANYO | |
/sys/class/power_supply/BAT1/model_name = 45N1125 | |
/sys/class/power_supply/BAT1/cycle_count = (not supported) | |
/sys/class/power_supply/BAT1/energy_full_design = 72150 [mWh] | |
/sys/class/power_supply/BAT1/energy_full = 57130 [mWh] | |
/sys/class/power_supply/BAT1/energy_now = 57130 [mWh] | |
/sys/class/power_supply/BAT1/power_now = 0 [mW] | |
/sys/class/power_supply/BAT1/status = Full | |
/sys/class/power_supply/BAT1/charge_start_threshold = 96 [%] | |
/sys/class/power_supply/BAT1/charge_stop_threshold = 100 [%] | |
tpacpi-bat.BAT1.forceDischarge = 0 | |
Charge = 100.0 [%] | |
Capacity = 79.2 [%] |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment