Albinoman887 · December 28, 2016 01:10
diff --git a/dmesg boot animation b/dmesg boot animation
 [    0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpu
 [    0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpuacct
 [    0.000000 / 01-01 00:00:00.000][0] Linux version 3.18.31-perf-g1b39075 (albinoman887@chronic-buildbox) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Dec 27 02:12:20 PST 2016
 [    0.000000 / 01-01 00:00:00.000][0] CPU: AArch64 Processor [511f2112] revision 2
 [    0.000000 / 01-01 00:00:00.000][0] alternatives: detected feature GIC system register CPU interface
 [    0.000000 / 01-01 00:00:00.000][0] L1_CACHE_BYTES (128) Cache Writeback Granule (128)
 [    0.000000 / 01-01 00:00:00.000][0] Machine: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP
 [    0.000000 / 01-01 00:00:00.000][0] efi: Getting EFI parameters from FDT:
 [    0.000000 / 01-01 00:00:00.000][0] efi: UEFI not found.
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 40 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088000000, size 105 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'ramoops_region@c0000000': base 0x00000000c0000000, size 1 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'crash_fb_mem@c0100000': base 0x00000000c0100000, size 12 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000085800000, size 40 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
 [    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
 [    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000088000000, size 105 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
 [    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x00000000c0000000, size 1 MiB
 [    0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node ramoops_region@c0000000, compatible id removed-dma-pool
 [    0.000000 / 01-01 00:00:00.000][0] cma: Reserved 32 MiB at 0x00000000f6800000
 [    0.000000 / 01-01 00:00:00.000][0] On node 0 totalpages: 992848
 [    0.000000 / 01-01 00:00:00.000][0]   DMA zone: 7428 pages used for memmap
 [    0.000000 / 01-01 00:00:00.000][0]   DMA zone: 0 pages reserved
 [    0.000000 / 01-01 00:00:00.000][0]   DMA zone: 475392 pages, LIFO batch:31
 [    0.000000 / 01-01 00:00:00.000][0]   Normal zone: 8086 pages used for memmap
 [    0.000000 / 01-01 00:00:00.000][0]   Normal zone: 517456 pages, LIFO batch:31
 [    0.000000 / 01-01 00:00:00.000][0] psci: probing for conduit method from DT.
 [    0.000000 / 01-01 00:00:00.000][0] psci: PSCIv1.0 detected in firmware.
 [    0.000000 / 01-01 00:00:00.000][0] psci: Using standard PSCI v0.2 function IDs
 [    0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
 [    0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
 [    0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
 [    0.000000 / 01-01 00:00:00.000][0] PERCPU: Embedded 15 pages/cpu @ffffffc0fe310000 s21888 r8192 d31360 u61440
 [    0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: s21888 r8192 d31360 u61440 alloc=15*4096
 [    0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 [    0.000000 / 01-01 00:00:00.000][0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 977334
 [    0.000000 / 01-01 00:00:00.000][0] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.selinux=permissive buildvariant=userdebug lge.rev=rev_10 model.name=LG-H918 lge.bootreason=normal cc_mode=0 kswitch lge.bootreasoncode=0x77665501 bootcable.type=400MA lge.battid=SW3800_VC0 androidboot.bl_unlock_complete=true androidboot.dlcomplete=0 androidboot.ddr_size=4294967296 androidboot.ddr_info=0x6 lge.crash_handler=off lge.hreset=off boot_cpus=0-3 androidboot.revision=12 lge.signed_image=false androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.rpmb_state=1 androidboot.bootdevice=624000.ufshc androidboot.serialno=LGH918847ffcc3 qpnp-power-on.warm_boot=1 gpt androidboot.authorized_kernel=true lge.signed_image=true androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi
 [    0.000000 / 01-01 00:00:00.000][0] [LGE-HW_REV] board_revno_setup : [LGE-HW-REV] Rev.rev_10
 [    0.000000 / 01-01 00:00:00.000][0] LGE BOOT REASON: Couldn't get bootreason - -22
 [    0.000000 / 01-01 00:00:00.000][0] CCMODE: CC mode disabled
 [    0.000000 / 01-01 00:00:00.000][0] [LGE-CD] boot_cable_setup : Boot cable : 400MA 8
 [    0.000000 / 01-01 00:00:00.000][0] [LGE-BATT-ID] battery_information_setup : Battery : SW3800_VC0 187
 [    0.000000 / 01-01 00:00:00.000][0] androidboot.dlcomplete = 0
 [    0.000000 / 01-01 00:00:00.000][0] PID hash table entries: 4096 (order: 3, 32768 bytes)
 [    0.000000 / 01-01 00:00:00.000][0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
 [    0.000000 / 01-01 00:00:00.000][0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 [    0.000000 / 01-01 00:00:00.000][0] Memory: 3669620K/3971392K available (12832K kernel code, 1620K rwdata, 6696K rodata, 492K init, 2519K bss, 301772K reserved)
 [    0.000000 / 01-01 00:00:00.000][0] Virtual kernel memory layout:
 [    0.000000 / 01-01 00:00:00.000][0]     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
 [    0.000000 / 01-01 00:00:00.000][0]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
 [    0.000000 / 01-01 00:00:00.000][0]               0xffffffbdc0000000 - 0xffffffbdc3f95400   (    63 MB actual)
 [    0.000000 / 01-01 00:00:00.000][0]     PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000   (    16 MB)
 [    0.000000 / 01-01 00:00:00.000][0]     fixed   : 0xffffffbffbdfd000 - 0xffffffbffbdff000   (     8 KB)
 [    0.000000 / 01-01 00:00:00.000][0]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
 [    0.000000 / 01-01 00:00:00.000][0]     memory  : 0xffffffc000000000 - 0xffffffc0fe550000   (  4069 MB)
 [    0.000000 / 01-01 00:00:00.000][0]       .init : 0xffffffc001395000 - 0xffffffc001410000   (   492 KB)
 [    0.000000 / 01-01 00:00:00.000][0] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 [    0.000000 / 01-01 00:00:00.000][0] HMP scheduling enabled.
 [    0.000000 / 01-01 00:00:00.000][0] Preemptible hierarchical RCU implementation.
 [    0.000000 / 01-01 00:00:00.000][0] 	RCU dyntick-idle grace-period acceleration is enabled.
 [    0.000000 / 01-01 00:00:00.000][0] NR_IRQS:64 nr_irqs:64 0
 [    0.000000 / 01-01 00:00:00.000][0] CPU0: found redistributor 0 region 0:0x0000000009c00000
 [    0.000000 / 01-01 00:00:00.000][0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
 [    0.000000 / 01-01 00:00:00.000][0] MPM 1 irq mapping errored -517
 [    0.000000 / 01-01 00:00:00.000][0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
 [    0.000004 / 01-01 00:00:00.000][0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
 [    0.000021 / 01-01 00:00:00.000][0] Switched to clocksource arch_sys_counter
 [    0.000853 / 01-01 00:00:00.000][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
 [    0.000872 / 01-01 00:00:00.000][0] pid_max: default: 32768 minimum: 301
 [    0.001774 / 01-01 00:00:00.000][0] Security Framework initialized
 [    0.001792 / 01-01 00:00:00.000][0] SELinux:  Initializing.
 [    0.001825 / 01-01 00:00:00.000][0] SELinux:  Starting in permissive mode
 [    0.001862 / 01-01 00:00:00.000][0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
 [    0.001873 / 01-01 00:00:00.000][0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
 [    0.002399 / 01-01 00:00:00.000][0] Initializing cgroup subsys freezer
 [    0.002419 / 01-01 00:00:00.000][0] Initializing cgroup subsys bfqio
 [    0.002689 / 01-01 00:00:00.000][0] /cpus/cpu@0: Unknown CPU type
 [    0.002703 / 01-01 00:00:00.000][0] /cpus/cpu@1: Unknown CPU type
 [    0.002715 / 01-01 00:00:00.000][0] /cpus/cpu@100: Unknown CPU type
 [    0.002728 / 01-01 00:00:00.000][0] /cpus/cpu@101: Unknown CPU type
 [    0.002763 / 01-01 00:00:00.000][0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
 [    0.002789 / 01-01 00:00:00.000][0] EFI services will not be available.
 [    0.009120 / 01-01 00:00:00.000][0] NOHZ: local_softirq_pending 02
 [    0.010705 / 01-01 00:00:00.000][0] 
 [    0.010705 / 01-01 00:00:00.000][0] **********************************************************
 [    0.010719 / 01-01 00:00:00.000][0] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
 [    0.010726 / 01-01 00:00:00.000][0] **                                                      **
 [    0.010733 / 01-01 00:00:00.000][0] ** trace_printk() being used. Allocating extra memory.  **
 [    0.010739 / 01-01 00:00:00.000][0] **                                                      **
 [    0.010746 / 01-01 00:00:00.000][0] ** This means that this is a DEBUG kernel and it is     **
 [    0.010752 / 01-01 00:00:00.000][0] ** unsafe for produciton use.                           **
 [    0.010758 / 01-01 00:00:00.000][0] **                                                      **
 [    0.010765 / 01-01 00:00:00.000][0] ** If you see this message and you are not debugging    **
 [    0.010771 / 01-01 00:00:00.000][0] ** the kernel, report this immediately to your vendor!  **
 [    0.010777 / 01-01 00:00:00.000][0] **                                                      **
 [    0.010784 / 01-01 00:00:00.000][0] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
 [    0.010790 / 01-01 00:00:00.000][0] **********************************************************
 [    0.011454 / 01-01 00:00:00.000][0] MSM Memory Dump base table set up
 [    0.011477 / 01-01 00:00:00.000][0] MSM Memory Dump apps data table set up
 [    0.012703 / 01-01 00:00:00.000][0] panic-handler: reserved[@0xc0100000+@0xc00000)
 [    0.014413 / 01-01 00:00:00.000][0] clock-cpu-8996: configuring clocks for the perf cluster
 [    0.014593 / 01-01 00:00:00.000][0] cpu_clock_8996_early_init: finished CPU clock configuration
 [    0.017051 / 01-01 00:00:00.000][1] CPU1: Booted secondary processor
 [    0.017077 / 01-01 00:00:00.000][1] CPU1: found redistributor 1 region 0:0x0000000009c40000
 [    0.019492 / 01-01 00:00:00.000][2] CPU2: Booted secondary processor
 [    0.019544 / 01-01 00:00:00.000][2] CPU2: found redistributor 100 region 0:0x0000000009c80000
 [    0.021796 / 01-01 00:00:00.019][3] CPU3: Booted secondary processor
 [    0.021814 / 01-01 00:00:00.019][3] CPU3: found redistributor 101 region 0:0x0000000009cc0000
 [    0.021953 / 01-01 00:00:00.019][0] Brought up 4 CPUs
 [    0.022008 / 01-01 00:00:00.019][0] SMP: Total of 4 processors activated.
 [    0.026764 / 01-01 00:00:00.019][0] DMI not present or invalid.
 [    0.034473 / 01-01 00:00:00.029][0] pinctrl core: initialized pinctrl subsystem
 [    0.034874 / 01-01 00:00:00.029][0] regulator-dummy: no parameters
 [    0.099416 / 01-01 00:00:00.089][0] NET: Registered protocol family 16
 [    0.130087 / 01-01 00:00:00.129][0] cpuidle: using governor ladder
 [    0.160083 / 01-01 00:00:00.159][1] cpuidle: using governor menu
 [    0.170084 / 01-01 00:00:00.169][1] cpuidle: using governor qcom
 [    0.171261 / 01-01 00:00:00.169][1] vdso: 2 pages (1 code @ ffffffc001431000, 1 data @ ffffffc001430000)
 [    0.171721 / 01-01 00:00:00.169][1] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
 [    0.172567 / 01-01 00:00:00.169][1] DMA: preallocated 2048 KiB pool for atomic allocations
 [    0.172836 / 01-01 00:00:00.169][1] msm_smem_init: unable to create logging context
 [    0.172876 / 01-01 00:00:00.169][1] msm_smd_init: unable to create SMD logging context
 [    0.172887 / 01-01 00:00:00.169][1] msm_smd_init: unable to create SMSM logging context
 [    0.173152 / 01-01 00:00:00.169][0] <CORE> glink_init: unable to create log context
 [    0.173370 / 01-01 00:00:00.169][0] <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
 [    0.173514 / 01-01 00:00:00.169][0] <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
 [    0.173630 / 01-01 00:00:00.169][0] <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
 [    0.173750 / 01-01 00:00:00.169][0] <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
 [    0.173879 / 01-01 00:00:00.169][0] <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
 [    0.187149 / 01-01 00:00:00.179][0] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
 [    0.188189 / 01-01 00:00:00.179][0] sps:sps is ready.
 [    0.189403 / 01-01 00:00:00.179][0] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_default, deferring probe
 [    0.189868 / 01-01 00:00:00.179][0] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_default, deferring probe
 [    0.190523 / 01-01 00:00:00.189][0] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
 [    0.192680 / 01-01 00:00:00.189][0] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
 [    0.223077 / 01-01 00:00:00.219][0] smd_channel_probe_now: allocation table not initialized
 [    0.223402 / 01-01 00:00:00.219][0] smd_channel_probe_now: allocation table not initialized
 [    0.223710 / 01-01 00:00:00.219][0] smd_channel_probe_now: allocation table not initialized
 [    0.224017 / 01-01 00:00:00.219][0] smd_channel_probe_now: allocation table not initialized
 [    0.224297 / 01-01 00:00:00.219][0] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
 [    0.224640 / 01-01 00:00:00.219][0] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
 [    0.225461 / 01-01 00:00:00.219][0] msm_rpm_dev_probe: APSS-RPM communication over GLINK
 [    0.234122 / 01-01 00:00:00.229][2] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
 [    0.235668 / 01-01 00:00:00.229][2] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
 [    0.240865 / 01-01 00:00:00.239][2] pmi8994_s2: 400 <--> 1015 mV at 520 mV normal idle 
 [    0.241538 / 01-01 00:00:00.239][2] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
 [    0.241846 / 01-01 00:00:00.239][2] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
 [    0.242181 / 01-01 00:00:00.239][2] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
 [    0.242580 / 01-01 00:00:00.239][2] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
 [    0.245288 / 01-01 00:00:00.239][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
 [    0.245365 / 01-01 00:00:00.239][2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
 [    0.245378 / 01-01 00:00:00.239][2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
 [    0.245393 / 01-01 00:00:00.239][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
 [    0.245405 / 01-01 00:00:00.239][2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
 [    0.250463 / 01-01 00:00:00.249][2] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
 [    0.251583 / 01-01 00:00:00.249][3] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
 [    0.252331 / 01-01 00:00:00.249][3] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
 [    0.253090 / 01-01 00:00:00.249][3] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
 [    0.253674 / 01-01 00:00:00.249][3] <CORE> glink_core_register_transport: unable to create log context for [rpm:smem]
 [    0.253799 / 01-01 00:00:00.249][0] smd_channel_probe_now: allocation table not initialized
 [    0.254115 / 01-01 00:00:00.249][2] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
 [    0.254824 / 01-01 00:00:00.249][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
 [    0.254926 / 01-01 00:00:00.249][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
 [    0.255090 / 01-01 00:00:00.249][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
 [    0.255372 / 01-01 00:00:00.249][3] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
 [    0.257361 / 01-01 00:00:00.249][3] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV 
 [    0.257728 / 01-01 00:00:00.249][3] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV 
 [    0.258090 / 01-01 00:00:00.249][3] apcc_l3_mem_acc_corner: 0 <--> 0 mV 
 [    0.258437 / 01-01 00:00:00.249][3] gfx_mem_acc_corner: 0 <--> 0 mV 
 [    0.258859 / 01-01 00:00:00.249][3] kryo0-retention: 468 <--> 892 mV at 520 mV 
 [    0.259080 / 01-01 00:00:00.249][3] kryo0: 468 <--> 892 mV at 754 mV 
 [    0.259230 / 01-01 00:00:00.249][3] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
 [    0.259545 / 01-01 00:00:00.249][3] kryo1-retention: 468 <--> 892 mV at 520 mV 
 [    0.259765 / 01-01 00:00:00.249][3] kryo1: 468 <--> 892 mV at 754 mV 
 [    0.259911 / 01-01 00:00:00.249][3] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
 [    0.264736 / 01-01 00:00:00.259][3] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
 [    0.266119 / 01-01 00:00:00.259][3] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
 [    0.285751 / 01-01 00:00:00.279][1] __of_mpm_init(): MPM driver mapping exists
 [    0.291402 / 01-01 00:00:00.289][1] console [pstore0] enabled
 [    0.291417 / 01-01 00:00:00.289][1] pstore: Registered ramoops as persistent store backend
 [    0.291429 / 01-01 00:00:00.289][1] ramoops: attached 0x80000@0xc0000000, ecc: 0/0
 [    0.293288 / 01-01 00:00:00.289][1] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
 [    0.293421 / 01-01 00:00:00.289][1] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
 [    0.293440 / 01-01 00:00:00.289][1] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
 [    0.295498 / 01-01 00:00:00.289][1] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
 [    0.295623 / 01-01 00:00:00.289][1] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
 [    0.295642 / 01-01 00:00:00.289][1] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
 [    0.296388 / 01-01 00:00:00.289][1] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
 [    0.296503 / 01-01 00:00:00.289][1] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
 [    0.296522 / 01-01 00:00:00.289][1] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
 [    0.297233 / 01-01 00:00:00.289][1] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
 [    0.297369 / 01-01 00:00:00.289][1] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
 [    0.297387 / 01-01 00:00:00.289][1] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
 [    0.297612 / 01-01 00:00:00.289][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
 [    0.298490 / 01-01 00:00:00.289][1] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle 
 [    0.298989 / 01-01 00:00:00.289][1] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
 [    0.299411 / 01-01 00:00:00.289][1] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
 [    0.299874 / 01-01 00:00:00.289][1] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle 
 [    0.300343 / 01-01 00:00:00.299][1] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
 [    0.300806 / 01-01 00:00:00.299][1] pm8994_s3: 1300 mV normal idle 
 [    0.301280 / 01-01 00:00:00.299][1] pm8994_s4: 1800 mV normal idle 
 [    0.301737 / 01-01 00:00:00.299][1] pm8994_s5: 2150 mV normal idle 
 [    0.302200 / 01-01 00:00:00.299][1] pm8994_s7: 800 mV normal idle 
 [    0.302655 / 01-01 00:00:00.299][1] pm8994_l1: 1000 mV normal idle 
 [    0.303141 / 01-01 00:00:00.299][1] pm8994_l2: 1250 mV normal idle 
 [    0.303919 / 01-01 00:00:00.299][1] pm8994_l3: 1050 mV normal idle 
 [    0.304412 / 01-01 00:00:00.299][1] pm8994_l4: 1225 mV normal idle 
 [    0.304881 / 01-01 00:00:00.299][1] pm8994_l6: 1200 mV normal idle 
 [    0.305338 / 01-01 00:00:00.299][1] pm8994_l8: 1800 mV normal idle 
 [    0.305785 / 01-01 00:00:00.299][1] pm8994_l9: 1800 mV normal idle 
 [    0.306259 / 01-01 00:00:00.299][1] pm8994_l10: 1800 mV normal idle 
 [    0.306714 / 01-01 00:00:00.299][1] pm8994_l11: 1200 mV normal idle 
 [    0.307174 / 01-01 00:00:00.299][1] pm8994_l12: 1800 mV normal idle 
 [    0.308096 / 01-01 00:00:00.299][1] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle 
 [    0.308572 / 01-01 00:00:00.299][1] pm8994_l14: 1800 mV normal idle 
 [    0.309490 / 01-01 00:00:00.299][1] pm8994_l15: 1800 mV normal idle 
 [    0.309963 / 01-01 00:00:00.299][1] pm8994_l16: 2700 mV normal idle 
 [    0.310479 / 01-01 00:00:00.309][1] pm8994_l17: 2800 mV normal idle 
 [    0.311285 / 01-01 00:00:00.309][1] pm8994_l18: 2200 mV normal idle 
 [    0.311737 / 01-01 00:00:00.309][1] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle 
 [    0.312199 / 01-01 00:00:00.309][1] pm8994_l19: 3000 mV normal idle 
 [    0.312665 / 01-01 00:00:00.309][1] pm8994_l20: 2950 mV normal idle 
 [    0.313114 / 01-01 00:00:00.309][1] pm8994_l21: 2950 mV normal idle 
 [    0.313957 / 01-01 00:00:00.309][1] pm8994_l22: 3300 mV normal idle 
 [    0.314438 / 01-01 00:00:00.309][1] pm8994_l23: 2800 mV normal idle 
 [    0.314903 / 01-01 00:00:00.309][1] pm8994_l24: 3075 mV normal idle 
 [    0.315372 / 01-01 00:00:00.309][1] pm8994_l25: 1200 mV normal idle 
 [    0.316203 / 01-01 00:00:00.309][1] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle 
 [    0.316609 / 01-01 00:00:00.309][1] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
 [    0.317082 / 01-01 00:00:00.309][1] pm8994_l27: 1000 mV normal idle 
 [    0.317529 / 01-01 00:00:00.309][1] pm8994_l28: 925 mV normal idle 
 [    0.318340 / 01-01 00:00:00.309][1] pm8994_l29: 2800 mV normal idle 
 [    0.318819 / 01-01 00:00:00.309][1] pm8994_l30: 1800 mV normal idle 
 [    0.319276 / 01-01 00:00:00.309][1] pm8994_l32: 1800 mV normal idle 
 [    0.319732 / 01-01 00:00:00.309][1] pm8994_lvs1: no parameters
 [    0.320186 / 01-01 00:00:00.319][1] pm8994_lvs2: no parameters
 [    0.320614 / 01-01 00:00:00.319][1] pmi8994_s1: 1025 mV normal idle 
 [    0.321073 / 01-01 00:00:00.319][1] pmi8994_boost_5v: no parameters
 [    0.321260 / 01-01 00:00:00.319][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
 [    0.321368 / 01-01 00:00:00.319][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
 [    0.321714 / 01-01 00:00:00.319][1] pmi8994_boost_pin_ctrl: no parameters
 [    0.321830 / 01-01 00:00:00.319][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
 [    0.321931 / 01-01 00:00:00.319][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
 [    0.322336 / 01-01 00:00:00.319][1] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle 
 [    0.322706 / 01-01 00:00:00.319][1] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle 
 [    0.322960 / 01-01 00:00:00.319][1] pm8994_s11_avs_limit: 470 <--> 1140 mV 
 [    0.323077 / 01-01 00:00:00.319][1] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
 [    0.324148 / 01-01 00:00:00.319][1] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
 [    0.324186 / 01-01 00:00:00.319][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
 [    0.324657 / 01-01 00:00:00.319][1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
 [    0.324679 / 01-01 00:00:00.319][1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
 [    0.324698 / 01-01 00:00:00.319][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
 [    0.324714 / 01-01 00:00:00.319][1] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
 [    0.325286 / 01-01 00:00:00.319][1] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
 [    0.325806 / 01-01 00:00:00.319][1] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
 [    0.325920 / 01-01 00:00:00.319][1] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
 [    0.325938 / 01-01 00:00:00.319][1] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
 [    0.326641 / 01-01 00:00:00.319][1] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
 [    0.326758 / 01-01 00:00:00.319][1] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
 [    0.326776 / 01-01 00:00:00.319][1] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
 [    0.327518 / 01-01 00:00:00.319][1] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
 [    0.327634 / 01-01 00:00:00.319][1] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
 [    0.327651 / 01-01 00:00:00.319][1] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
 [    0.328372 / 01-01 00:00:00.319][1] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
 [    0.328497 / 01-01 00:00:00.319][1] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
 [    0.328514 / 01-01 00:00:00.319][1] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
 [    0.328950 / 01-01 00:00:00.319][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
 [    0.349162 / 01-01 00:00:00.339][2] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
 [    0.350268 / 01-01 00:00:00.349][2] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
 [    0.350291 / 01-01 00:00:00.349][2] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
 [    0.350308 / 01-01 00:00:00.349][2] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
 [    0.350570 / 01-01 00:00:00.349][2] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
 [    0.350588 / 01-01 00:00:00.349][2] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
 [    0.350604 / 01-01 00:00:00.349][2] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
 [    0.350874 / 01-01 00:00:00.349][2] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
 [    0.350892 / 01-01 00:00:00.349][2] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
 [    0.350906 / 01-01 00:00:00.349][2] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
 [    0.360942 / 01-01 00:00:00.359][2] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
 [    0.362827 / 01-01 00:00:00.359][2] pmi8994_boost_5v: no parameters
 [    0.362935 / 01-01 00:00:00.359][2] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
 [    0.363038 / 01-01 00:00:00.359][2] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
 [    0.363250 / 01-01 00:00:00.359][2] pmi8994_boost_pin_ctrl: no parameters
 [    0.363312 / 01-01 00:00:00.359][2] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
 [    0.363407 / 01-01 00:00:00.359][2] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
 [    0.364265 / 01-01 00:00:00.359][2] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
 [    0.364294 / 01-01 00:00:00.359][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
 [    0.364507 / 01-01 00:00:00.359][2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
 [    0.364523 / 01-01 00:00:00.359][2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
 [    0.364540 / 01-01 00:00:00.359][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
 [    0.364555 / 01-01 00:00:00.359][2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
 [    0.365078 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
 [    0.365096 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
 [    0.365111 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
 [    0.365124 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
 [    0.365138 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
 [    0.365155 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
 [    0.365392 / 01-01 00:00:00.359][2] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
 [    0.365600 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 585000 uV
 [    0.365615 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused    SVS: open-loop= 685000 uV
 [    0.365629 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused    NOM: open-loop= 805000 uV
 [    0.365641 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused  TURBO: open-loop= 960000 uV
 [    0.365732 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 328
 [    0.365747 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused    SVS: quot[ 7]= 506, quot_offset[ 7]= 140
 [    0.365761 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused    NOM: quot[ 7]= 743, quot_offset[ 7]= 235
 [    0.365774 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused  TURBO: quot[ 7]=1010, quot_offset[ 7]= 265
 [    0.365900 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
 [    0.365914 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
 [    0.365928 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
 [    0.365941 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
 [    0.365954 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
 [    0.365970 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
 [    0.366108 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 585000 uV
 [    0.366121 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused    SVS: open-loop= 685000 uV
 [    0.366134 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused    NOM: open-loop= 805000 uV
 [    0.366146 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused  TURBO: open-loop= 960000 uV
 [    0.366194 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 328
 [    0.366208 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused    SVS: quot[ 7]= 506, quot_offset[ 7]= 140
 [    0.366221 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused    NOM: quot[ 7]= 743, quot_offset[ 7]= 235
 [    0.366234 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused  TURBO: quot[ 7]=1010, quot_offset[ 7]= 265
 [    0.366340 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
 [    0.366354 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
 [    0.366368 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
 [    0.366381 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
 [    0.366394 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
 [    0.366409 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
 [    0.366632 / 01-01 00:00:00.359][2] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
 [    0.366848 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 575000 uV
 [    0.366863 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused    SVS: open-loop= 665000 uV
 [    0.366876 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused    NOM: open-loop= 745000 uV
 [    0.366888 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused  TURBO: open-loop=1020000 uV
 [    0.367008 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 308
 [    0.367023 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused    SVS: quot[ 7]= 465, quot_offset[ 7]= 115
 [    0.367036 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused    NOM: quot[ 7]= 624, quot_offset[ 7]= 155
 [    0.367049 / 01-01 00:00:00.359][2] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused  TURBO: quot[ 7]=1106, quot_offset[ 7]= 480
 [    0.367529 / 01-01 00:00:00.359][2] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
 [    0.367675 / 01-01 00:00:00.359][2] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV 
 [    0.367920 / 01-01 00:00:00.359][2] apc0_cbf_corner: 0 <--> 0 mV at 0 mV 
 [    0.371227 / 01-01 00:00:00.369][3] cpr3_regulator_measure_aging: apcc: average quotient delta=14 (count=10)
 [    0.371260 / 01-01 00:00:00.369][3] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1875 uV
 [    0.371764 / 01-01 00:00:00.369][3] apc1_corner: 0 <--> 0 mV at 0 mV 
 [    0.373484 / 01-01 00:00:00.369][1] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
 [    0.373508 / 01-01 00:00:00.369][1] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
 [    0.373784 / 01-01 00:00:00.369][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 620000 uV
 [    0.373799 / 01-01 00:00:00.369][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 675000 uV
 [    0.373812 / 01-01 00:00:00.369][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 805000 uV
 [    0.373823 / 01-01 00:00:00.369][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 905000 uV
 [    0.374014 / 01-01 00:00:00.369][1] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
 [    0.374157 / 01-01 00:00:00.369][1] gfx_corner: 0 <--> 0 mV at 0 mV 
 [    0.375681 / 01-01 00:00:00.369][3] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
 [    0.375790 / 01-01 00:00:00.369][3] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
 [    0.375806 / 01-01 00:00:00.369][3] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
 [    0.377884 / 01-01 00:00:00.369][1] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
 [    0.378024 / 01-01 00:00:00.369][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
 [    0.378040 / 01-01 00:00:00.369][1] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
 [    0.380527 / 01-01 00:00:00.379][1] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
 [    0.380674 / 01-01 00:00:00.379][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
 [    0.380690 / 01-01 00:00:00.379][1] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
 [    0.381915 / 01-01 00:00:00.379][1] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
 [    0.382059 / 01-01 00:00:00.379][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
 [    0.382075 / 01-01 00:00:00.379][1] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
 [    0.383870 / 01-01 00:00:00.379][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
 [    0.386175 / 01-01 00:00:00.379][1] clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu0
 [    0.386227 / 01-01 00:00:00.379][1] clock-cpu-8996: set OPP pair (1593600000 Hz, 935000 uv) on cpu0
 [    0.386250 / 01-01 00:00:00.379][1] clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu1
 [    0.386296 / 01-01 00:00:00.379][1] clock-cpu-8996: set OPP pair (1593600000 Hz, 935000 uv) on cpu1
 [    0.386318 / 01-01 00:00:00.379][1] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu2
 [    0.386375 / 01-01 00:00:00.379][1] clock-cpu-8996: set OPP pair (2150400000 Hz, 1005000 uv) on cpu2
 [    0.386399 / 01-01 00:00:00.379][1] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu3
 [    0.386451 / 01-01 00:00:00.379][1] clock-cpu-8996: set OPP pair (2150400000 Hz, 1005000 uv) on cpu3
 [    0.386608 / 01-01 00:00:00.379][1] clock-cpu-8996: set OPP pair (307200000 Hz, 630000 uv) on soc:qcom,m4m
 [    0.386659 / 01-01 00:00:00.379][1] clock-cpu-8996: set OPP pair (1593600000 Hz, 935000 uv) on soc:qcom,m4m
 [    0.387160 / 01-01 00:00:00.379][1] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
 [    0.387660 / 01-01 00:00:00.379][1] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 550000 uV) on b00000.qcom,kgsl-3d0
 [    0.387694 / 01-01 00:00:00.379][1] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 905000 uV) on b00000.qcom,kgsl-3d0
 [    0.389359 / 01-01 00:00:00.379][1] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
 [    0.389627 / 01-01 00:00:00.379][1] pmi8994_boost_5v: no parameters
 [    0.389748 / 01-01 00:00:00.379][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
 [    0.389859 / 01-01 00:00:00.379][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
 [    0.390139 / 01-01 00:00:00.389][1] pmi8994_boost_pin_ctrl: no parameters
 [    0.390258 / 01-01 00:00:00.389][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
 [    0.390360 / 01-01 00:00:00.389][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
 [    0.391336 / 01-01 00:00:00.389][1] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
 [    0.391372 / 01-01 00:00:00.389][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
 [    0.391755 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq [CPU0] : max freq = 1190400
 [    0.391775 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
 [    0.391791 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq [CPU2] : max freq = 0
 [    0.391804 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
 [    0.391820 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq [CPU2] : max freq = 1190400
 [    0.391833 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
 [    0.392970 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq [CPU0] : max freq = 1593600
 [    0.392990 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
 [    0.393006 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq [CPU2] : max freq = 4294967295
 [    0.393018 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
 [    0.393032 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq [CPU2] : max freq = 2150400
 [    0.393044 / 01-01 00:00:00.389][1] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
 [    0.393139 / 01-01 00:00:00.389][3] pmi8994_boost_5v: no parameters
 [    0.393262 / 01-01 00:00:00.389][3] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
 [    0.393369 / 01-01 00:00:00.389][3] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
 [    0.393604 / 01-01 00:00:00.389][3] pmi8994_boost_pin_ctrl: no parameters
 [    0.393669 / 01-01 00:00:00.389][3] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
 [    0.393764 / 01-01 00:00:00.389][3] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
 [    0.484811 / 01-01 00:00:00.479][2] KPI: Bootloader start count = 42387
 [    0.484836 / 01-01 00:00:00.479][2] KPI: Bootloader end count = 245681
 [    0.484849 / 01-01 00:00:00.479][2] KPI: Bootloader display count = 59932
 [    0.484862 / 01-01 00:00:00.479][2] KPI: Bootloader load kernel count = 4514
 [    0.484876 / 01-01 00:00:00.479][2] KPI: Kernel MPM timestamp = 271668
 [    0.484887 / 01-01 00:00:00.479][2] KPI: Kernel MPM Clock frequency = 32768
 [    0.484914 / 01-01 00:00:00.479][2] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=12
 [    0.484914 / 01-01 00:00:00.479][2]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=3089905918 num_pmics=2
 [    0.484954 / 01-01 00:00:00.479][2] [LGE_POWER] lge power!!!
 [    0.485232 / 01-01 00:00:00.479][2] gdsc_mmagic_bimc: no parameters
 [    0.486061 / 01-01 00:00:00.479][2] usb_otg_vreg: no parameters
 [    0.486140 / 01-01 00:00:00.479][2] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
 [    0.486250 / 01-01 00:00:00.479][2] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
 [    0.486447 / 01-01 00:00:00.479][2] wlan_en_vreg: no parameters
 [    0.487272 / 01-01 00:00:00.479][2] vgaarb: loaded
 [    0.488870 / 01-01 00:00:00.479][2] SCSI subsystem initialized
 [    0.490008 / 01-01 00:00:00.479][2] usbcore: registered new interface driver usbfs
 [    0.490136 / 01-01 00:00:00.489][2] usbcore: registered new interface driver hub
 [    0.490318 / 01-01 00:00:00.489][0] usbcore: registered new device driver usb
 [    0.490893 / 01-01 00:00:00.489][0] soc:usb_nop_phy supply vcc not found, using dummy regulator
 [    0.491758 / 01-01 00:00:00.489][0] media: Linux media interface: v0.10
 [    0.491827 / 01-01 00:00:00.489][0] Linux video capture interface: v2.00
 [    0.500526 / 01-01 00:00:00.499][0] cpufreq: driver msm up and running
 [    0.501373 / 01-01 00:00:00.499][0] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
 [    0.501979 / 01-01 00:00:00.499][0] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
 [    0.502529 / 01-01 00:00:00.499][0] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
 [    0.503153 / 01-01 00:00:00.499][0] ION heap system created
 [    0.503346 / 01-01 00:00:00.499][0] ION heap kmalloc created
 [    0.503362 / 01-01 00:00:00.499][0] ION heap adsp created at 0x00000000ff800000 with size 400000
 [    0.503375 / 01-01 00:00:00.499][0] ION heap qsecom created at 0x00000000fe400000 with size 1400000
 [    0.503388 / 01-01 00:00:00.499][0] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
 [    0.503400 / 01-01 00:00:00.499][0] ION heap secure_heap created
 [    0.504493 / 01-01 00:00:00.499][0] msm_bus_fabric_init_driver
 [    0.509202 / 01-01 00:00:00.499][0] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
 [    0.509226 / 01-01 00:00:00.499][0] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
 [    0.512499 / 01-01 00:00:00.509][2] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
 [    0.512970 / 01-01 00:00:00.509][2] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
 [    0.518561 / 01-01 00:00:00.509][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
 [    0.518575 / 01-01 00:00:00.509][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
 [    0.518587 / 01-01 00:00:00.509][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
 [    0.518697 / 01-01 00:00:00.509][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
 [    0.518723 / 01-01 00:00:00.509][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
 [    0.518746 / 01-01 00:00:00.509][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
 [    0.518768 / 01-01 00:00:00.509][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
 [    0.518790 / 01-01 00:00:00.509][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
 [    0.518812 / 01-01 00:00:00.509][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
 [    0.518833 / 01-01 00:00:00.509][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
 [    0.520413 / 01-01 00:00:00.519][2] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
 [    0.520436 / 01-01 00:00:00.519][2] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Unknown power-off reason
 [    0.520601 / 01-01 00:00:00.519][2] input: qpnp_pon as /devices/virtual/input/input0
 [    0.521028 / 01-01 00:00:00.519][2] pon_spare_reg: no parameters
 [    0.521095 / 01-01 00:00:00.519][2] qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
 [    0.521153 / 01-01 00:00:00.519][2] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
 [    0.521170 / 01-01 00:00:00.519][2] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Unknown power-off reason
 [    0.521365 / 01-01 00:00:00.519][2] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
 [    0.521447 / 01-01 00:00:00.519][2] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
 [    0.522590 / 01-01 00:00:00.519][2] ipa ipa2_uc_state_check:296 uC interface not initialized
 [    0.522604 / 01-01 00:00:00.519][2] ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
 [    0.522610 / 01-01 00:00:00.519][2] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
 [    0.524265 / 01-01 00:00:00.519][3] sps:BAM 0x0000000000684000 is registered.
 [    0.525131 / 01-01 00:00:00.519][3] ipa ipa2_uc_state_check:296 uC interface not initialized
 [    0.525335 / 01-01 00:00:00.519][3] sps:BAM 0x0000000000684000 (va:0xffffff8000ec0000) enabled: ver:0x27, number of pipes:20
 [    0.526725 / 01-01 00:00:00.519][3] ipa ipa2_uc_state_check:296 uC interface not initialized
 [    0.532432 / 01-01 00:00:00.529][3] ipa ipa2_uc_state_check:296 uC interface not initialized
 [    0.534173 / 01-01 00:00:00.529][3] IPA driver initialization was successful.
 [    0.535636 / 01-01 00:00:00.529][3] gdsc_mmagic_video: no parameters
 [    0.535869 / 01-01 00:00:00.529][3] gdsc_mmagic_mdss: no parameters
 [    0.536060 / 01-01 00:00:00.529][3] gdsc_mmagic_camss: no parameters
 [    0.536295 / 01-01 00:00:00.529][3] gdsc_venus: no parameters
 [    0.536316 / 01-01 00:00:00.529][3] gdsc_venus: supplied by gdsc_mmagic_video
 [    0.536522 / 01-01 00:00:00.529][3] gdsc_venus_core0: fast normal 
 [    0.536683 / 01-01 00:00:00.529][3] gdsc_venus_core1: fast normal 
 [    0.536889 / 01-01 00:00:00.529][3] gdsc_camss_top: no parameters
 [    0.536910 / 01-01 00:00:00.529][3] gdsc_camss_top: supplied by gdsc_mmagic_camss
 [    0.537093 / 01-01 00:00:00.529][3] gdsc_vfe0: no parameters
 [    0.537112 / 01-01 00:00:00.529][3] gdsc_vfe0: supplied by gdsc_camss_top
 [    0.537301 / 01-01 00:00:00.529][3] gdsc_vfe1: no parameters
 [    0.537321 / 01-01 00:00:00.529][3] gdsc_vfe1: supplied by gdsc_camss_top
 [    0.537527 / 01-01 00:00:00.529][3] gdsc_mdss: no parameters
 [    0.537548 / 01-01 00:00:00.529][3] gdsc_mdss: supplied by gdsc_mmagic_mdss
 [    0.537832 / 01-01 00:00:00.529][3] gdsc_jpeg: no parameters
 [    0.537852 / 01-01 00:00:00.529][3] gdsc_jpeg: supplied by gdsc_camss_top
 [    0.538053 / 01-01 00:00:00.529][3] gdsc_cpp: no parameters
 [    0.538072 / 01-01 00:00:00.529][3] gdsc_cpp: supplied by gdsc_camss_top
 [    0.538257 / 01-01 00:00:00.529][3] gdsc_pcie_0: no parameters
 [    0.538399 / 01-01 00:00:00.529][3] gdsc_pcie_1: no parameters
 [    0.538543 / 01-01 00:00:00.529][3] gdsc_pcie_2: no parameters
 [    0.538714 / 01-01 00:00:00.529][3] gdsc_usb30: no parameters
 [    0.538867 / 01-01 00:00:00.529][3] gdsc_ufs: no parameters
 [    0.539072 / 01-01 00:00:00.529][3] gdsc_fd: no parameters
 [    0.539093 / 01-01 00:00:00.529][3] gdsc_fd: supplied by gdsc_camss_top
 [    0.539264 / 01-01 00:00:00.529][3] gdsc_gpu: no parameters
 [    0.539473 / 01-01 00:00:00.529][3] gdsc_gpu_gx: no parameters
 [    0.539853 / 01-01 00:00:00.529][3] gdsc_gpu_gx: supplied by gfx_corner
 [    0.540208 / 01-01 00:00:00.539][3] gdsc_hlos1_vote_aggre0_noc: no parameters
 [    0.540396 / 01-01 00:00:00.539][3] gdsc_hlos1_vote_lpass_adsp: no parameters
 [    0.540545 / 01-01 00:00:00.539][3] gdsc_hlos1_vote_lpass_core: no parameters
 [    0.540726 / 01-01 00:00:00.539][3] gdsc_aggre0_noc: no parameters
 [    0.543176 / 01-01 00:00:00.539][3] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
 [    0.543201 / 01-01 00:00:00.539][3] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
 [    0.544472 / 01-01 00:00:00.539][3] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
 [    0.544523 / 01-01 00:00:00.539][3] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
 [    0.544534 / 01-01 00:00:00.539][3] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
 [    0.545621 / 01-01 00:00:00.539][3] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
 [    0.546230 / 01-01 00:00:00.539][3] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
 [    0.546266 / 01-01 00:00:00.539][3] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
 [    0.546276 / 01-01 00:00:00.539][3] mdss_pll_probe: Unable to get the cell-index rc=-22
 [    0.687151 / 01-01 00:00:00.679][3] Advanced Linux Sound Architecture Driver Initialized.
 [    0.687889 / 01-01 00:00:00.679][3] Bluetooth: ffffffc0f889bd20
 [    0.687981 / 01-01 00:00:00.679][3] NET: Registered protocol family 31
 [    0.687993 / 01-01 00:00:00.679][3] Bluetooth: ffffffc0f889bd20
 [    0.688008 / 01-01 00:00:00.679][3] Bluetooth: ffffffc0f889bd00Bluetooth: ffffffc0f889bcd0
 [    0.688055 / 01-01 00:00:00.679][3] Bluetooth: ffffffc0f889bce0<6>[    0.688564 / 01-01 00:00:00.679][3] cfg80211: Calling CRDA to update world regulatory domain
 [    0.688596 / 01-01 00:00:00.679][3] cfg80211: World regulatory domain updated:
 [    0.688607 / 01-01 00:00:00.679][3] cfg80211:  DFS Master region: unset
 [    0.688614 / 01-01 00:00:00.679][3] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
 [    0.688630 / 01-01 00:00:00.679][3] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
 [    0.688639 / 01-01 00:00:00.679][3] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
 [    0.688648 / 01-01 00:00:00.679][3] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
 [    0.688656 / 01-01 00:00:00.679][3] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
 [    0.688664 / 01-01 00:00:00.679][3] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
 [    0.688671 / 01-01 00:00:00.679][3] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
 [    0.688680 / 01-01 00:00:00.679][3] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
 [    0.688688 / 01-01 00:00:00.679][3] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
 [    0.688865 / 01-01 00:00:00.679][2] pcie:pcie_init.
 [    0.688876 / 01-01 00:00:00.679][2] pcie_init: unable to create IPC log context for pcie0-short
 [    0.688885 / 01-01 00:00:00.679][2] pcie_init: unable to create IPC log context for pcie0-long
 [    0.688894 / 01-01 00:00:00.679][2] pcie_init: unable to create IPC log context for pcie0-dump
 [    0.688902 / 01-01 00:00:00.679][2] pcie_init: unable to create IPC log context for pcie1-short
 [    0.688909 / 01-01 00:00:00.679][2] pcie_init: unable to create IPC log context for pcie1-long
 [    0.688917 / 01-01 00:00:00.679][2] pcie_init: unable to create IPC log context for pcie1-dump
 [    0.688924 / 01-01 00:00:00.679][2] pcie_init: unable to create IPC log context for pcie2-short
 [    0.688931 / 01-01 00:00:00.679][2] pcie_init: unable to create IPC log context for pcie2-long
 [    0.688940 / 01-01 00:00:00.679][2] pcie_init: unable to create IPC log context for pcie2-dump
 [    0.691122 / 01-01 00:00:00.689][2] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
 [    0.693990 / 01-01 00:00:00.689][2] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
 [    0.696814 / 01-01 00:00:00.689][0] pmi8994_boost_5v: no parameters
 [    0.697097 / 01-01 00:00:00.689][0] pmi8994_boost_5v: supplied by pon_spare_reg
 [    0.697564 / 01-01 00:00:00.689][0] pmi8994_boost_pin_ctrl: no parameters
 [    0.697731 / 01-01 00:00:00.689][0] pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
 [    0.698059 / 01-01 00:00:00.689][0] register_qpnp_ibb_regulator: [Display] IBB soft start R is set for PMI8996
 [    0.698284 / 01-01 00:00:00.689][0] ibb_reg: 4600 <--> 6000 mV at 5500 mV 
 [    0.698616 / 01-01 00:00:00.689][0] lab_reg: 4600 <--> 6000 mV at 5500 mV 
 [    0.699268 / 01-01 00:00:00.689][0] usb_otg_vreg: no parameters
 [    0.699427 / 01-01 00:00:00.689][0] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
 [    0.699555 / 01-01 00:00:00.689][0] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
 [    0.700448 / 01-01 00:00:00.699][2] Switched to clocksource arch_sys_counter
 [    0.735583 / 01-01 00:00:00.729][2] [LGE-BATT-ID] lge_battery_id_probe : LG Battery ID probe Start~!!
 [    0.735617 / 01-01 00:00:00.729][2] [LGE-BATT-ID] lge_battery_id_probe : Battery info : 187
 [    0.735846 / 01-01 00:00:00.729][2] [LGE-BATT-ID] lge_battery_id_probe : LG Battery ID probe done~!!
 [    0.736203 / 01-01 00:00:00.729][2] lge_power_changed_work
 [    0.737699 / 01-01 00:00:00.729][2] [LGE-UEVENT] lge_uevent_probe : LG UEVENT probe Start~!!
 [    0.737837 / 01-01 00:00:00.729][2] [LGE-UEVENT] lge_uevent_probe : LG UEVENT probe done~!!
 [    0.737861 / 01-01 00:00:00.729][2] lge_power_changed_work
 [    0.738634 / 01-01 00:00:00.729][2] bcl_peripheral:bcl_perph_init BCL Initialized
 [    0.743088 / 01-01 00:00:00.739][3] NET: Registered protocol family 2
 [    0.743809 / 01-01 00:00:00.739][3] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
 [    0.743903 / 01-01 00:00:00.739][3] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
 [    0.744289 / 01-01 00:00:00.739][3] TCP: Hash tables configured (established 32768 bind 32768)
 [    0.744436 / 01-01 00:00:00.739][3] TCP: reno registered
 [    0.744457 / 01-01 00:00:00.739][3] UDP hash table entries: 2048 (order: 4, 65536 bytes)
 [    0.744491 / 01-01 00:00:00.739][3] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
 [    0.744859 / 01-01 00:00:00.739][3] NET: Registered protocol family 1
 [    0.744934 / 01-01 00:00:00.739][3] PCI: CLS 0 bytes, default 128
 [    0.745799 / 01-01 00:00:00.739][0] usb_otg_vreg: no parameters
 [    0.745951 / 01-01 00:00:00.739][0] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
 [    0.746065 / 01-01 00:00:00.739][0] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
 [    0.746603 / 01-01 00:00:00.739][3] Trying to unpack rootfs image as initramfs...
 [    0.792630 / 01-01 00:00:00.789][3] Freeing initrd memory: 2372K (ffffffc002200000 - ffffffc002451000)
 [    0.794710 / 01-01 00:00:00.789][3] kryo perfevents: CPU pmu for kryo-pmuv3 detected
 [    0.800679 / 01-01 00:00:00.799][3] futex hash table entries: 1024 (order: 5, 131072 bytes)
 [    0.800817 / 01-01 00:00:00.799][3] Initialise system trusted keyring
 [    0.800929 / 01-01 00:00:00.799][3] audit: initializing netlink subsys (disabled)
 [    0.801045 / 01-01 00:00:00.799][3] audit: type=2000 audit(0.799:1): initialized
 [    0.805900 / 01-01 00:00:00.799][3] vmscan: error setting kswapd cpu affinity mask
 [    0.809841 / 01-01 00:00:00.799][3] Registering sdcardfs 2.1.3-2
 [    0.809937 / 01-01 00:00:00.799][3] fuse init (API version 7.23)
 [    0.810151 / 01-01 00:00:00.809][3] SELinux:  Registering netfilter hooks
 [    0.812413 / 01-01 00:00:00.809][3] Key type asymmetric registered
 [    0.812437 / 01-01 00:00:00.809][3] Asymmetric key parser 'x509' registered
 [    0.812589 / 01-01 00:00:00.809][3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
 [    0.812607 / 01-01 00:00:00.809][3] io scheduler noop registered
 [    0.812619 / 01-01 00:00:00.809][3] io scheduler deadline registered
 [    0.812720 / 01-01 00:00:00.809][3] io scheduler cfq registered
 [    0.812783 / 01-01 00:00:00.809][3] io scheduler bfq registered (default)
 [    0.812793 / 01-01 00:00:00.819][3] BFQ I/O-scheduler: v7r8
 [    0.823975 / 01-01 00:00:00.819][3] [LCD][LM3697] lm3697_probe: i2c probe start
 [    0.824314 / 01-01 00:00:00.819][3] [LM3697] lm3697_parse_dt gpio: 1015, max_current: 19, min: 1, default: 46, max: 255, output_config: 4, brightness_config: 0, sink_feedback: 0, boost_ctrl: 4, pwm : 0 
 [    0.824326 / 01-01 00:00:00.819][3] [LCD][LM3697] lm3697_probe: gpio = 1015
 [    0.825295 / 01-01 00:00:00.819][3] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
 [    0.826602 / 01-01 00:00:00.819][3] No change in context(0==0), skip
 [    0.827883 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
 [    0.827892 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
 [    0.827899 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
 [    0.827906 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
 [    0.827929 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
 [    0.827937 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
 [    0.827943 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
 [    0.827950 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
 [    0.827971 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
 [    0.827978 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
 [    0.827995 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
 [    0.828003 / 01-01 00:00:00.819][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
 [    0.828014 / 01-01 00:00:00.819][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
 [    0.828086 / 01-01 00:00:00.819][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
 [    0.828468 / 01-01 00:00:00.819][3] xlog_status: enable:1, panic:0, dump:2
 [    0.828699 / 01-01 00:00:00.819][3] OF: no ranges; cannot translate
 [    0.828712 / 01-01 00:00:00.819][3] OF: no ranges; cannot translate
 [    0.829349 / 01-01 00:00:00.819][3] OF: no ranges; cannot translate
 [    0.829359 / 01-01 00:00:00.819][3] OF: no ranges; cannot translate
 [    0.829484 / 01-01 00:00:00.819][3] OF: no ranges; cannot translate
 [    0.829494 / 01-01 00:00:00.819][3] OF: no ranges; cannot translate
 [    0.829622 / 01-01 00:00:00.819][3] OF: no ranges; cannot translate
 [    0.829631 / 01-01 00:00:00.819][3] OF: no ranges; cannot translate
 [    0.829838 / 01-01 00:00:00.819][3] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
 [    0.835175 / 01-01 00:00:00.829][3] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
 [    0.835380 / 01-01 00:00:00.829][3] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
 [    0.835522 / 01-01 00:00:00.829][3] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
 [    0.835669 / 01-01 00:00:00.829][3] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
 [    0.838712 / 01-01 00:00:00.829][3] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
 [    0.839243 / 01-01 00:00:00.829][3] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_sw49407_dsc_qhd_cmd
 [    0.839261 / 01-01 00:00:00.829][3] mdss_dsi_panel_init: Panel Name = SW49407 cmd mode dsc dsi panel
 [    0.839271 / 01-01 00:00:00.829][3] mdss_dsi_panel_init: panel_type is LGD_SW49407_CMD_DSC_PANEL
 [    0.839277 / 01-01 00:00:00.829][3] panel_type is 4
 [    0.839321 / 01-01 00:00:00.829][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap
 [    0.839333 / 01-01 00:00:00.829][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-hl
 [    0.839345 / 01-01 00:00:00.829][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex
 [    0.839354 / 01-01 00:00:00.829][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim
 [    0.839363 / 01-01 00:00:00.829][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-hl
 [    0.839373 / 01-01 00:00:00.829][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim-hl
 [    0.839448 / 01-01 00:00:00.829][3] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_sw49407_dsc_qhd_cmd" (ffffffc0f889b210)
 [    0.839468 / 01-01 00:00:00.829][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-vcom-command
 [    0.839495 / 01-01 00:00:00.829][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cabc-20-command
 [    0.839505 / 01-01 00:00:00.829][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cabc-30-command
 [    0.839515 / 01-01 00:00:00.829][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
 [    0.839524 / 01-01 00:00:00.829][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
 [    0.839536 / 01-01 00:00:00.829][3] mdss_dsi_parse_topology_config: cfg_node name config1 lm_split:720x720 pp_split:no
 [    0.839626 / 01-01 00:00:00.829][3] mdss_dsi_parse_panel_features: partial_update_enabled=1
 [    0.839639 / 01-01 00:00:00.829][3] mdss_dsi_parse_panel_features: ulps feature enabled
 [    0.839646 / 01-01 00:00:00.829][3] mdss_dsi_parse_panel_features: ulps during suspend feature enabled
 [    0.839655 / 01-01 00:00:00.829][3] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
 [    0.839714 / 01-01 00:00:00.829][3] [AOD] init start
 [    0.839826 / 01-01 00:00:00.829][3] mdss_panel_parse_blex_settings: Configured BL_OTHERS bkltex ctrl
 [    0.840394 / 01-01 00:00:00.839][3] no supply entry present: lge,extra-supply-entries
 [    0.840438 / 01-01 00:00:00.839][3] mdss_dsi_parse_ctrl_params:3974 Unable to read qcom,display-id, data=0000000000000000,len=20
 [    0.840492 / 01-01 00:00:00.839][3] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
 [    0.840535 / 01-01 00:00:00.839][3] lge_mdss_dsi_parse_gpio_params: num_gpios=2
 [    0.840606 / 01-01 00:00:00.839][3] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
 [    0.840635 / 01-01 00:00:00.839][3] mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
 [    0.840642 / 01-01 00:00:00.839][3] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800198a000 ctrl_size=400 phy_base=ffffff800198c400 phy_size=588
 [    0.840799 / 01-01 00:00:00.839][3] dsi_panel_device_register: Continuous splash enabled
 [    0.841442 / 01-01 00:00:00.839][3] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
 [    0.841864 / 01-01 00:00:00.839][3] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
 [    0.842492 / 01-01 00:00:00.839][3] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
 [    0.842698 / 01-01 00:00:00.839][3] mdss_dsi_ctrl 996000.qcom,mdss_dsi_ctrl1: mdss_dsi_ctrl_probe: Cell-index not specified, rc=-22
 [    0.842722 / 01-01 00:00:00.839][3] mdss_dsi_ctrl: probe of 996000.qcom,mdss_dsi_ctrl1 failed with error -22
 [    0.844192 / 01-01 00:00:00.839][3] mdss_dsi_status_init: DSI status check interval:5000
 [    0.845205 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_data: id=0
 [    0.845216 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_HPD_PM'
 [    0.845225 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_gpio_data: no gpio
 [    0.845232 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_DDC_PM'
 [    0.845240 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_gpio_data: no gpio
 [    0.845246 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CORE_PM'
 [    0.845252 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_gpio_data: no gpio
 [    0.845258 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CEC_PM'
 [    0.845265 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_gpio_data: no gpio
 [    0.845271 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_HPD_PM'
 [    0.845287 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_vreg_data: hpd-gdsc min=0, max=0, enable=0 disable=0
 [    0.845293 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_DDC_PM'
 [    0.845300 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_vreg_data: no vreg
 [    0.845306 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CORE_PM'
 [    0.845313 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_vreg_data: no vreg
 [    0.845318 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CEC_PM'
 [    0.845324 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_vreg_data: no vreg
 [    0.845330 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_HPD_PM'
 [    0.845337 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_DDC_PM'
 [    0.845342 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_clk_data: no clk
 [    0.845348 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CORE_PM'
 [    0.845354 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CEC_PM'
 [    0.845360 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_clk_data: no clk
 [    0.845371 / 01-01 00:00:00.839][3] hdmi_tx_get_dt_data:4587 Unable to read qcom,display-id, data=0000000000000000,len=0
 [    0.845935 / 01-01 00:00:00.839][3] hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001990000, len=0x50c
 [    0.845947 / 01-01 00:00:00.839][3] hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001998000, len=0x6158
 [    0.846037 / 01-01 00:00:00.839][3] hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001992000, len=0xfff
 [    0.846435 / 01-01 00:00:00.839][3] hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
 [    0.847238 / 01-01 00:00:00.839][3] mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
 [    0.847678 / 01-01 00:00:00.839][3] hdmi_tx_probe: Add child devices.
 [    0.849470 / 01-01 00:00:00.839][3] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
 [    0.851599 / 01-01 00:00:00.849][3] [MDSS] lge_cd_lpc is not yet ready
 [    0.851639 / 01-01 00:00:00.849][3] [MDSS] cable 8
 [    0.851649 / 01-01 00:00:00.849][3] lge,blmap: br_lvl(127) -> bl_lvl(561)
 [    0.851659 / 01-01 00:00:00.849][3] mdss_fb_probe: fb0: split_mode:1 left:720 right:720
 [    0.852206 / 01-01 00:00:00.849][3] mdss_fb_register: FrameBuffer[0] 1440x2720 registered successfully!
 [    0.852779 / 01-01 00:00:00.849][3] mdss_mdp_splash_parse_dt: splash mem child node is not present
 [    0.852787 / 01-01 00:00:00.849][3] mdss_mdp_splash_parse_dt: no rsvd mem found in DT for splash screen
 [    0.852794 / 01-01 00:00:00.849][3] mdss_mdp_splash_init: splash memory reserve failed
 [    0.852810 / 01-01 00:00:00.849][3] vts_register_value_sensor: Register value sensor [led] : weight = 0
 [    0.852817 / 01-01 00:00:00.849][3] vts_register_value_sensor: Register value sensor [led_sensor] : weight = 1000
 [    0.852824 / 01-01 00:00:00.849][3] mdss_fb_probe: "led" virtual value sensor is registered.
 [    0.852860 / 01-01 00:00:00.849][3] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
 [    0.852923 / 01-01 00:00:00.849][3] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
 [    0.852966 / 01-01 00:00:00.849][3] hdmi_tx_event_handler: event = MDSS_EVENT_FB_REGISTERED suspend=0, hpd_feature=0
 [    0.852997 / 01-01 00:00:00.849][3] hdmi_tx_sysfs_create: sysfs group ffffffc07622f410
 [    0.853005 / 01-01 00:00:00.849][3] hdmi_tx_init_panel: panel initialized
 [    0.853043 / 01-01 00:00:00.849][3] hdmi_tx_init_hdcp: HDCP 1.4 initialized
 [    0.853262 / 01-01 00:00:00.849][3] hdmi_tx_init_hdcp: HDCP 2.2 initialized
 [    0.853309 / 01-01 00:00:00.849][3] hdmi_tx_init_audio: audio initialized
 [    0.858108 / 01-01 00:00:00.849][3] mdss_fb_probe: fb2: split_mode:0 left:0 right:0
 [    0.858264 / 01-01 00:00:00.849][3] mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
 [    0.858362 / 01-01 00:00:00.849][3] mdss_mdp_splash_parse_dt: splash mem child node is not present
 [    0.862183 / 01-01 00:00:00.859][3] glink_loopback_server_init: unable to create log context
 [    0.862342 / 01-01 00:00:00.859][3] msm_smp2p_init: unable to create log context
 [    0.865043 / 01-01 00:00:00.859][3] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
 [    0.865065 / 01-01 00:00:00.859][3] logging for Indications: Unable to create QMI IPC qmi_log_init<3>[    0.869027 / 01-01 00:00:00.859][3] apr_init: Unable to create ipc log context
 [    0.877223 / 01-01 00:00:00.869][3] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
 [    0.878202 / 01-01 00:00:00.869][3] msm_rpm_log_probe: OK
 [    0.881911 / 01-01 00:00:00.879][3] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
 [    0.882725 / 01-01 00:00:00.879][3] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
 [    0.885584 / 01-01 00:00:00.879][3] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
 [    0.888961 / 01-01 00:00:00.879][3] bootlog_probe: start 0x4fd3
 [    0.888983 / 01-01 00:00:00.879][3] bootlog_probe: size 0x1fff4
 [    0.888990 / 01-01 00:00:00.879][3] -------------------------------------------------
 [    0.888996 / 01-01 00:00:00.879][3] below logs are got from bootloader
 [    0.889002 / 01-01 00:00:00.879][3] -------------------------------------------------
 [    0.889008 / 01-01 00:00:00.879][3] 
 [    0.889066 / 01-01 00:00:00.879][3] B -    428311 - DPE_MEMC_STATUS_0: DDR0 0x0000FFFF,  DDR1 0x0000FFFF
 [    0.889105 / 01-01 00:00:00.879][3] B -    428342 - ch 2, cs 1, mr8 0x08080808
 [    0.889162 / 01-01 00:00:00.879][3] B -    428342 - DPE_MEMC_STATUS_0: DDR0 0x0000FFFF,  DDR1 0x0000FFFF
 [    0.889233 / 01-01 00:00:00.879][3] B -    428586 - ddr_info: SKH ver=21914 ch=0x3 cs=0x3 rev1=0x4 rev2=0x0 mr8=0x8 hwrev=12
 [    0.889267 / 01-01 00:00:00.879][3] B -    428586 - ddr_trained[37c,0x3]
 [    0.889307 / 01-01 00:00:00.879][3] B -    428586 - ddr_initialize_device, Delta
 [    0.889355 / 01-01 00:00:00.879][3] B -    428586 - DDR ID, Rank 0, Rank 1, 0x6, 0x400, 0x400
 [    0.889391 / 01-01 00:00:00.879][3] B -    428677 - [DDR] remap_size: 4096MB
 [    0.889441 / 01-01 00:00:00.879][3] B -    428677 - [DDR] remap_info CS0: 0x80000000, CS1: 0x0
 [    0.889474 / 01-01 00:00:00.879][3] B -    428799 - Basic DDR tests done
 [    0.889509 / 01-01 00:00:00.879][3] B -    484736 - boot_pre_longkey_check
 [    0.889543 / 01-01 00:00:00.879][3] B -    484736 - powerkey release state
 [    0.889574 / 01-01 00:00:00.879][3] B -    492697 - Image Load, Start
 [    0.889611 / 01-01 00:00:00.879][3] B -    492819 - bootLUN:1, currentLUN:1
 [    0.889649 / 01-01 00:00:00.879][3] B -    492819 - xbl is matched with bootLUN
 [    0.889699 / 01-01 00:00:00.879][3] D -       976 - LGE SBL Image Loaded, Delta - (51579 Bytes)
 [    0.889730 / 01-01 00:00:00.879][3] B -    493673 - clock_init, Start
 [    0.889761 / 01-01 00:00:00.879][3] B -    494008 - Image Load, Start
 [    0.889817 / 01-01 00:00:00.879][3] D -      3935 - QSEE Dev Config Image Loaded, Delta - (46200 Bytes)
 [    0.889847 / 01-01 00:00:00.879][3] B -    498339 - Image Load, Start
 [    0.889895 / 01-01 00:00:00.879][3] D -      2501 - APDP Image Loaded, Delta - (7768 Bytes)
 [    0.889925 / 01-01 00:00:00.879][3] B -    515602 - Image Load, Start
 [    0.889975 / 01-01 00:00:00.879][3] D -     55358 - QSEE Image Loaded, Delta - (1640904 Bytes)
 [    0.890006 / 01-01 00:00:00.879][3] B -    570990 - Image Load, Start
 [    0.890158 / 01-01 00:00:00.889][3] B -    571509 - QFPROM flag != QFPROMblown
 [    0.890206 / 01-01 00:00:00.889][3] D -       549 - SEC Image Loaded, Delta - (4116 Bytes)
 [    0.890247 / 01-01 00:00:00.889][3] B -    572088 - sbl1_efs_handle_cookies, Start
 [    0.890287 / 01-01 00:00:00.889][3] D -        91 - sbl1_efs_handle_cookies, Delta
 [    0.890318 / 01-01 00:00:00.889][3] B -    572180 - Image Load, Start
 [    0.890366 / 01-01 00:00:00.889][3] D -     12047 - QHEE Image Loaded, Delta - (254192 Bytes)
 [    0.890398 / 01-01 00:00:00.889][3] B -    584227 - Image Load, Start
 [    0.890446 / 01-01 00:00:00.889][3] D -     11133 - RPM Image Loaded, Delta - (223932 Bytes)
 [    0.890478 / 01-01 00:00:00.889][3] B -    595390 - Image Load, Start
 [    0.890522 / 01-01 00:00:00.889][3] D -         0 - STI Image Loaded, Delta - (0 Bytes)
 [    0.890552 / 01-01 00:00:00.889][3] B -    596183 - cable type is 8
 [    0.890605 / 01-01 00:00:00.889][3] B -    771192 - pm_app_smbchg: TA/USB attached, battery present
 [    0.890651 / 01-01 00:00:00.889][3] B -    771253 - Charger source: SDP before APSD rerun
 [    0.890699 / 01-01 00:00:00.889][3] B -    772077 - [ADC][mvol=1791][hw_rev_table[12]=[1700]
 [    0.890743 / 01-01 00:00:00.889][3] B -    780098 - [Display] SW49407_QHD_DSC_CMD_PANEL
 [    0.890778 / 01-01 00:00:00.889][3] B -    780098 - panel_type = CMD_PANEL
 [    0.890811 / 01-01 00:00:00.889][3] B -    787418 - Panel power on done
 [    0.890845 / 01-01 00:00:00.889][3] B -    787449 - soc_version:0x00030001
 [    0.890878 / 01-01 00:00:00.889][3] B -    832497 - Panel pre init done
 [    0.890940 / 01-01 00:00:00.889][3] [0] logbuf_relocate_sbl_log: log_start=0x85e11040, log_size=0x815, end_time=0
 [    0.890959 / 01-01 00:00:00.889][3] [0] welcome to lk
 [    0.890965 / 01-01 00:00:00.889][3] 
 [    0.890986 / 01-01 00:00:00.889][3] [10] platform_init()
 [    0.891005 / 01-01 00:00:00.889][3] [10] target_init()
 [    0.891024 / 01-01 00:00:00.889][3] [10] RPM GLink Init
 [    0.891056 / 01-01 00:00:00.889][3] [10] Opening RPM Glink Port success
 [    0.891088 / 01-01 00:00:00.889][3] [10] Opening SSR Glink Port success
 [    0.891133 / 01-01 00:00:00.889][3] [10] Glink Connection between APPS and RPM established
 [    0.891178 / 01-01 00:00:00.889][3] [10] Glink Connection between APPS and RPM established
 [    0.891235 / 01-01 00:00:00.889][3] [20] bootmode_set_board_revision: board revision value is 12 from smem
 [    0.891264 / 01-01 00:00:00.889][3] [20] HW Rev(12), vol_up gpio(2)
 [    0.891285 / 01-01 00:00:00.889][3] [30] UFS init success
 [    0.891322 / 01-01 00:00:00.889][3] [70] SW3800_Authentication [vendor code: 1]
 [    0.891356 / 01-01 00:00:00.889][3] [110] set_dload_mode: download_mode:0
 [    0.891392 / 01-01 00:00:00.889][3] [120] [KSwitch] ftm kill switch item value=
 [    0.891454 / 01-01 00:00:00.889][3] [120] [KSwitch] (kswitch_load_flag): ftm kill switch item has invalid format
 [    0.891475 / 01-01 00:00:00.889][3] [120] batt_info = 187
 [    0.891530 / 01-01 00:00:00.889][3] [120] bootmode_set_cable: usb cable type/port type is 8/3 from smem
 [    0.891549 / 01-01 00:00:00.889][3] [120] get_qem = 0
 [    0.891590 / 01-01 00:00:00.889][3] [120] [emmc_one_binary] target partition updates
 [    0.891629 / 01-01 00:00:00.889][3] [120] [emmc_one_binary] userdata partition set
 [    0.891690 / 01-01 00:00:00.889][3] [120] [emmc_one_binary] card size 63677923328 Byte, card_sec_count 15546368
 [    0.891720 / 01-01 00:00:00.889][3] [150] PROTECTIVE_MBR_SIZE = 4096
 [    0.891757 / 01-01 00:00:00.889][3] [150] [emmc_one_binary] backup_lba 15546367
 [    0.891799 / 01-01 00:00:00.889][3] [150] [emmc_one_binary] Don't need to update GPT.
 [    0.891829 / 01-01 00:00:00.889][3] [150] Qseecom Init Done in Appsbl
 [    0.891930 / 01-01 00:00:00.889][3] [150] secure app region addr=0x86600000 size=0x1a00000[150] TZ App region notif returned with status:0 addr:86600000 size:27262976
 [    0.891994 / 01-01 00:00:00.889][3] [150] TZ App log region register returned with status:0 addr:9191d000 size:4096
 [    0.892026 / 01-01 00:00:00.889][3] [150] Qseecom TZ Init Done in Appsbl
 [    0.892050 / 01-01 00:00:00.889][3] [210] Loading cmnlib done
 [    0.892105 / 01-01 00:00:00.889][3] [210] qseecom_start_app: Loading app keymaster for the first time'
 [    0.892141 / 01-01 00:00:00.889][3] [240] <8>keymaster: "\"KEYMASTER Init \""
 [    0.892185 / 01-01 00:00:00.889][3] [240] GPIO 64 Drive stength set to 16mA and gpio_set
 [    0.892211 / 01-01 00:00:00.889][3] [240] LK SEC APP Handle: 0x1
 [    0.892259 / 01-01 00:00:00.889][3] [240] <8>keymaster: "\"open_add_km_partition status:0\""
 [    0.892286 / 01-01 00:00:00.889][3] [250] Device unlock statue 1
 [    0.892312 / 01-01 00:00:00.889][3] [250] Device unlock count 1
 [    0.892338 / 01-01 00:00:00.889][3] [250] Device flash count 0
 [    0.892357 / 01-01 00:00:00.889][3] [250] PIF_DETECT:8
 [    0.892389 / 01-01 00:00:00.889][3] [250] [Display]backlight level: 793
 [    0.892408 / 01-01 00:00:00.889][3] [250] PIF_DETECT:8
 [    0.892440 / 01-01 00:00:00.889][3] [250] [Display]backlight level: 189
 [    0.892482 / 01-01 00:00:00.889][3] [250] [Display]panel name:  sw49407_qhd_dsc_cmd
 [    0.892512 / 01-01 00:00:00.889][3] [250] [Display]vddio_en_gpio : 69
 [    0.892547 / 01-01 00:00:00.889][3] [250] oem.panel D : sw49407_qhd_dsc_cmd 
 [    0.892585 / 01-01 00:00:00.889][3] [250] OEM panel override:sw49407_qhd_dsc_cmd
 [    0.892640 / 01-01 00:00:00.889][3] [250] topology config-1 not supported. fallback to default config1
 [    0.892668 / 01-01 00:00:00.889][3] [250] panel_operating_mode=0x2
 [    0.892702 / 01-01 00:00:00.889][3] [260] Return value from recv_data: 14
 [    0.892735 / 01-01 00:00:00.889][3] [270] Return value from recv_data: 14
 [    0.892765 / 01-01 00:00:00.889][3] [290] [Display] IBB REVISION4 is 1
 [    0.892805 / 01-01 00:00:00.889][3] [330] msm_display_init: chargerlogo mode check
 [    0.892840 / 01-01 00:00:00.889][3] [330] pm8x41_get_is_cold_boot: Warm boot
 [    0.892889 / 01-01 00:00:00.889][3] [330] target_check_chargerlogo_mode: chargerlogo mode check
 [    0.892953 / 01-01 00:00:00.889][3] [330] target_check_chargerlogo_mode: cold_boot=0, pon1=160, key=0, cable_type=8
 [    0.892973 / 01-01 00:00:00.889][3] [390] lglogo_image.
 [    0.892999 / 01-01 00:00:00.889][3] [390] Config MIPI_CMD_PANEL.
 [    0.893026 / 01-01 00:00:00.889][3] [530] Turn on MIPI_CMD_PANEL.
 [    0.893053 / 01-01 00:00:00.889][3] [530] Configure GPIO success
 [    0.893095 / 01-01 00:00:00.889][3] [540] [Display][lm3697] read reg[0x21] level = 189
 [    0.893124 / 01-01 00:00:00.889][3] [540] HW Rev(12), vol_up gpio(2)
 [    0.893162 / 01-01 00:00:00.889][3] [540] target_home_key: should be implemented
 [    0.893223 / 01-01 00:00:00.889][3] [540] selectmode_get_current_key_info: vol_up=0, vol_down=0, power=0, home=0
 [    0.893278 / 01-01 00:00:00.889][3] [540] selectmode_check_usb_cable: with usb cable. not factory cable
 [    0.893323 / 01-01 00:00:00.889][3] [540] target_selectmode_init: selectmode_get_mode()=0
 [    0.893339 / 01-01 00:00:00.889][3] [540] SM_NONE
 [    0.893361 / 01-01 00:00:00.889][3] [540] webdload status:0
 [    0.893387 / 01-01 00:00:00.889][3] [540] dload_reboot status:0
 [    0.893422 / 01-01 00:00:00.889][3] [540] pm8x41_get_is_cold_boot: Warm boot
 [    0.893445 / 01-01 00:00:00.889][3] [540] webdload status:0
 [    0.893476 / 01-01 00:00:00.889][3] [540] LGFTM_LAF_MID_REBOOT_FLAG is 0
 [    0.893532 / 01-01 00:00:00.889][3] [540] bootcmd_add_pair: value changed from  to LG-H918 at model.name
 [    0.893585 / 01-01 00:00:00.889][3] [540] bootcmd_add_pair: value changed from  to rev_10 at lge.rev
 [    0.893643 / 01-01 00:00:00.889][3] [540] bootcmd_add_pair: value changed from  to 400MA at bootcable.type
 [    0.893700 / 01-01 00:00:00.889][3] [540] bootcmd_add_pair: value changed from  to SW3800_VC0 at lge.battid
 [    0.893753 / 01-01 00:00:00.889][3] [540] bootmode_set_ddr_info: DDR Size info 4294967296 from smem
 [    0.893799 / 01-01 00:00:00.889][3] [540] bootmode_set_ddr_info: DDR MR info 0x6 from smem
 [    0.893837 / 01-01 00:00:00.889][3] [540] [CCAudit] Start-up BOOT MODE = normal
 [    0.893894 / 01-01 00:00:00.889][3] [540] bootcmd_add_pair: value changed from  to normal at lge.bootreason
 [    0.893958 / 01-01 00:00:00.889][3] [540] bootcmd_add_pair: value changed from  to 0x77665501 at lge.bootreasoncode
 [    0.893981 / 01-01 00:00:00.889][3] [540] MSM8996 ver : 0x3
 [    0.894012 / 01-01 00:00:00.889][3] [540] UFS FORCE Reset count : 0x0
 [    0.894030 / 01-01 00:00:00.889][3] [540] get_qem = 0
 [    0.894049 / 01-01 00:00:00.889][3] [540] get_qem = 0
 [    0.894101 / 01-01 00:00:00.889][3] [540] bootmode_set_factory: put cable_type(8) and qem(0) to smem
 [    0.894139 / 01-01 00:00:00.889][3] [540] CHARGERLOGO: reboot_mode = 0x77665501
 [    0.894159 / 01-01 00:00:00.889][3] [540] is_update_gpt
 [    0.894181 / 01-01 00:00:00.889][3] [540] is_update_gpt: 0
 [    0.894213 / 01-01 00:00:00.889][3] [540] Recovery command: 32 \D8H\90\91\D8H\90\91
 [    0.894241 / 01-01 00:00:00.889][3] [540] [LAF] boot_into_laf = 0
 [    0.894279 / 01-01 00:00:00.889][3] [540] Unable to locate /bootselect partition
 [    0.894316 / 01-01 00:00:00.889][3] [540] [KSwitch] check kill switch feature
 [    0.894368 / 01-01 00:00:00.889][3] [540] [KSwitch] check done (do nothing): valid=true, flasg=0x0
 [    0.894390 / 01-01 00:00:00.889][3] [540] now sniffing = 0
 [    0.894410 / 01-01 00:00:00.889][3] [540] cc mode 0!!!
 [    0.894458 / 01-01 00:00:00.889][3] [540] bootcmd_add_pair: value changed from  to 0 at cc_mode
 [    0.894487 / 01-01 00:00:00.889][3] [540] get_encrypt_on_minios = 0
 [    0.894515 / 01-01 00:00:00.889][3] [540] get_encrypt_on_minios = 0
 [    0.894547 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable in 0
 [    0.894580 / 01-01 00:00:00.889][3] [FOTA] : IStorageFlash_SetActiveLun 0
 [    0.894610 / 01-01 00:00:00.889][3] [FOTA] : _ReadGPTHeader - 0, 4096
 [    0.894640 / 01-01 00:00:00.889][3] [FOTA] : _ReadGPTEntry  - 0, 8192
 [    0.894693 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.894743 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(0 pt) : 19, laf, 6000, 3000000
 [    0.894796 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.894850 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.894905 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(0 pt) : 20, factory, c006000, 4200000
 [    0.894959 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.895012 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.895068 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(0 pt) : 23, system, 19486000, 15d800000
 [    0.895122 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.895176 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.895228 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(0 pt) : 49, misc, 6006000, 2000000
 [    0.895282 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.895312 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable in 1
 [    0.895345 / 01-01 00:00:00.889][3] [FOTA] : IStorageFlash_SetActiveLun 1
 [    0.895375 / 01-01 00:00:00.889][3] [FOTA] : _ReadGPTHeader - 1, 4096
 [    0.895405 / 01-01 00:00:00.889][3] [FOTA] : _ReadGPTEntry  - 1, 8192
 [    0.895458 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.895507 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(1 pt) : 10, xbl, 6000, 300000
 [    0.895561 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.895614 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.895666 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(1 pt) : 32, fota, 606000, 400000
 [    0.895720 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.895751 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable in 2
 [    0.895784 / 01-01 00:00:00.889][3] [FOTA] : IStorageFlash_SetActiveLun 2
 [    0.895814 / 01-01 00:00:00.889][3] [FOTA] : _ReadGPTHeader - 2, 4096
 [    0.895844 / 01-01 00:00:00.889][3] [FOTA] : _ReadGPTEntry  - 2, 8192
 [    0.895898 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.895947 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(2 pt) : 24, xbl2, 6000, 300000
 [    0.896001 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.896032 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable in 3
 [    0.896066 / 01-01 00:00:00.889][3] [FOTA] : IStorageFlash_SetActiveLun 3
 [    0.896095 / 01-01 00:00:00.889][3] [FOTA] : _ReadGPTHeader - 3, 4096
 [    0.896125 / 01-01 00:00:00.889][3] [FOTA] : _ReadGPTEntry  - 3, 8192
 [    0.896156 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable in 4
 [    0.896189 / 01-01 00:00:00.889][3] [FOTA] : IStorageFlash_SetActiveLun 4
 [    0.896219 / 01-01 00:00:00.889][3] [FOTA] : _ReadGPTHeader - 4, 4096
 [    0.896248 / 01-01 00:00:00.889][3] [FOTA] : _ReadGPTEntry  - 4, 8192
 [    0.896302 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.896352 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 0, tz, 7906000, 200000
 [    0.896405 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.896458 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.896508 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 1, rpm, 8906000, 80000
 [    0.896562 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.896615 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.896668 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 2, modem, 8c46000, 5600000
 [    0.896721 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.896775 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.896829 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 3, keymaster, e2c6000, 80000
 [    0.896882 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.896936 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.896988 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 4, devcfg, 8c06000, 20000
 [    0.897043 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897096 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897146 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 5, hyp, 8a06000, 80000
 [    0.897200 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897253 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897303 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 6, pmic, 8b06000, 80000
 [    0.897357 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897410 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897468 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 7, raw_resources, 8106000, 400000
 [    0.897521 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897574 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897624 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 8, sec, e246000, 80000
 [    0.897678 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897732 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897785 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 11, cmnlib, e3c6000, 80000
 [    0.897838 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897892 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.897946 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 12, cmnlib64, e4c6000, 80000
 [    0.897999 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898052 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898104 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 16, aboot, 7d06000, 200000
 [    0.898158 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898211 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898261 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 17, boot, 6000, 2800000
 [    0.898315 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898368 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898423 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 18, recovery, 2806000, 2880000
 [    0.898477 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898530 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898583 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 33, tzbak, 7b06000, 200000
 [    0.898636 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898689 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898742 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 34, rpmbak, 8986000, 80000
 [    0.898796 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898850 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.898906 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 35, keymasterbak, e346000, 80000
 [    0.898960 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899014 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899069 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 36, devcfgbak, 8c26000, 20000
 [    0.899122 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899176 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899229 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 37, hypbak, 8a86000, 80000
 [    0.899282 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899336 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899389 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 38, pmicbak, 8b86000, 80000
 [    0.899443 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899497 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899557 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 39, raw_resourcesbak, 8506000, 400000
 [    0.899610 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899664 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899718 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 40, cmnlibbak, e446000, 80000
 [    0.899773 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899826 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899882 / 01-01 00:00:00.889][3] [FOTA] : _SetUAPartitionTable(4 pt) : 41, cmnlib64bak, e546000, 80000
 [    0.899936 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.899989 / 01-01 00:00:00.889][3] [FOTA] : --------------------------------------------------------
 [    0.900059 / 01-01 00:00:00.899][3] [FOTA] : _SetUAPartitionTable(4 pt) : 42, abootbak, 7f06000, 200000
 [    0.900113 / 01-01 00:00:00.899][3] [FOTA] : --------------------------------------------------------
 [    0.900167 / 01-01 00:00:00.899][3] [FOTA] : --------------------------------------------------------
 [    0.900225 / 01-01 00:00:00.899][3] [FOTA] : _SetUAPartitionTable(4 pt) : 43, recoverybak, 5086000, 2880000
 [    0.900278 / 01-01 00:00:00.899][3] [FOTA] : --------------------------------------------------------
 [    0.900309 / 01-01 00:00:00.899][3] [FOTA] : _SetUAPartitionTable in 5
 [    0.900342 / 01-01 00:00:00.899][3] [FOTA] : IStorageFlash_SetActiveLun 5
 [    0.900373 / 01-01 00:00:00.899][3] [FOTA] : _ReadGPTHeader - 5, 4096
 [    0.900402 / 01-01 00:00:00.899][3] [FOTA] : _ReadGPTEntry  - 5, 8192
 [    0.900433 / 01-01 00:00:00.899][3] [FOTA] : _SetUAPartitionTable in 6
 [    0.900466 / 01-01 00:00:00.899][3] [FOTA] : IStorageFlash_SetActiveLun 6
 [    0.900495 / 01-01 00:00:00.899][3] [FOTA] : _ReadGPTHeader - 6, 4096
 [    0.900525 / 01-01 00:00:00.899][3] [FOTA] : _ReadGPTEntry  - 6, 8192
 [    0.900566 / 01-01 00:00:00.899][3] [FOTA] : _InitUSDAddress : 166f00000, 166f60000
 [    0.900599 / 01-01 00:00:00.899][3] [FOTA] : IStorageFlash_SetActiveLun 1
 [    0.900630 / 01-01 00:00:00.899][3] [FOTA] : _CheckUSDMagic : no match
 [    0.900663 / 01-01 00:00:00.899][3] [FOTA] : IStorageFlash_SetActiveLun 1
 [    0.900693 / 01-01 00:00:00.899][3] [FOTA] : _CheckUSDMagic : no match
 [    0.900712 / 01-01 00:00:00.899][3] [550] get_qem = 0
 [    0.900735 / 01-01 00:00:00.899][3] [550] Enter normal mode
 [    0.900763 / 01-01 00:00:00.899][3] [550] boot from boot partition
 [    0.900788 / 01-01 00:00:00.899][3] [550] Device is unlocked!
 [    0.900827 / 01-01 00:00:00.899][3] [550] Loading (boot) image (19312640): start
 [    0.900864 / 01-01 00:00:00.899][3] [690] Loading (boot) image (19312640): done
 [    0.900911 / 01-01 00:00:00.899][3] [690] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
 [    0.900953 / 01-01 00:00:00.899][3] [690] Authenticating /boot image (19312640): start
 [    0.900997 / 01-01 00:00:00.899][3] [690] boot_verifier: Device is in ORANGE boot state.
 [    0.901038 / 01-01 00:00:00.899][3] [690] boot_verifier: Skipping boot verification.
 [    0.901082 / 01-01 00:00:00.899][3] [690] boot_verifier: Device is in ORANGE boot state.
 [    0.901128 / 01-01 00:00:00.899][3] [690] Authenticating boot image: done return value = 0
 [    0.901170 / 01-01 00:00:00.899][3] [690] [CCAudit] Authenticating boot image: Success
 [    0.901228 / 01-01 00:00:00.899][3] [690] partition size, image size, round size : 4194304, 4060036, 4063232
 [    0.901255 / 01-01 00:00:00.899][3] [730] Raw resources verified.
 [    0.901316 / 01-01 00:00:00.899][3] [730] display_boot_state : verifiedboot_orange_01, verifiedboot_orange_02, 
 [    0.901360 / 01-01 00:00:00.899][3] [760] read_image_info_from_emmc: total_image_num (53)
 [    0.901408 / 01-01 00:00:00.899][3] [760] get_image_info: Finding image verifiedboot_orange_01
 [    0.901455 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[0].name quick_lglogo_image
 [    0.901503 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[1].name load_charger_image
 [    0.901559 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[2].name battery_insert_nt_module_image
 [    0.901601 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[3].name NT_TYPE_CM1
 [    0.901644 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[4].name NT_TYPE_CM2
 [    0.901686 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[5].name NT_TYPE_CM3
 [    0.901732 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[6].name NT_TYPE_ERROR_MAX
 [    0.901779 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[7].name NT_TYPE_ERROR_MIN
 [    0.901829 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[8].name NT_TYPE_ERROR_UNKNOWN
 [    0.901878 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[9].name NT_TYPE_EU_AUSTRALIA
 [    0.901925 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[10].name NT_TYPE_EU_GLOBAL
 [    0.901968 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[11].name NT_TYPE_HM1
 [    0.902011 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[12].name NT_TYPE_HM2
 [    0.902058 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[13].name NT_TYPE_JP_KDDI
 [    0.902103 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[14].name NT_TYPE_KR_KT
 [    0.902149 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[15].name NT_TYPE_KR_LGU
 [    0.902194 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[16].name NT_TYPE_KR_SKT
 [    0.902239 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[17].name NT_TYPE_NA_ATT
 [    0.902285 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[18].name NT_TYPE_NA_SPR
 [    0.902331 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[19].name NT_TYPE_NA_TMUS
 [    0.902377 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[20].name NT_TYPE_NA_VZW
 [    0.902424 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[21].name NT_TYPE_RESERVED1
 [    0.902472 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[22].name NT_TYPE_RESERVED2
 [    0.902515 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[23].name downloadmode
 [    0.902564 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[24].name factory_reset_image
 [    0.902620 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[25].name factory_reset_1st_line_image
 [    0.902675 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[26].name factory_reset_2nd_line_image
 [    0.902730 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[27].name factory_reset_no_1st_image
 [    0.902785 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[28].name factory_reset_yes_1st_image
 [    0.902840 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[29].name factory_reset_no_2nd_image
 [    0.902895 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[30].name factory_reset_yes_2nd_image
 [    0.902941 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[31].name kswitch_factory
 [    0.902985 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[32].name kswitch_dload
 [    0.903039 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[33].name system_recovery_menu_image
 [    0.903097 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[34].name system_recovery_continue_image
 [    0.903154 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[35].name system_recovery_wipecache_image
 [    0.903214 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[36].name system_recovery_factoryreset_image
 [    0.903272 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[37].name system_recovery_powerdown_image
 [    0.903329 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[38].name system_recovery_safemode_image
 [    0.903386 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[39].name system_recovery_usbmode_image
 [    0.903440 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[40].name LGE_PM_NO_BATTERY_QUESTION
 [    0.903492 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[41].name LGE_PM_NO_BATTERY_EMPTY
 [    0.903540 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[42].name LGE_PM_NO_CHARGER
 [    0.903592 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[43].name LGE_PM_WEAK_CHARGING_ON
 [    0.903638 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[44].name imei_main_image
 [    0.903685 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[45].name imei_guide_image
 [    0.903731 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[46].name system_errlogo
 [    0.903780 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[47].name verifiedboot_red_01
 [    0.903829 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[48].name verifiedboot_red_02
 [    0.903880 / 01-01 00:00:00.899][3] [760] get_image_info: img_info[49].name verifiedboot_orange_01
 [    0.903931 / 01-01 00:00:00.899][3] [830] display_boot_state: decompress time:0 key rel:0 paused:0
 [    0.903958 / 01-01 00:00:00.899][3] [5920] LK SEC APP Handle: 0x1
 [    0.903991 / 01-01 00:00:00.899][3] [5920] Input digest : 0x00000001(36)
 [    0.904030 / 01-01 00:00:00.899][3] [5920] decompressing gzip kernel image: start
 [    0.904065 / 01-01 00:00:00.899][3] [6180] decompressing kernel image: done
 [    0.904134 / 01-01 00:00:00.899][3] [6190] Best match DTB tags 246/00000c08/0x00000000/30001/20009/10013/0/0/92a0dbf4/564ae
 [    0.904199 / 01-01 00:00:00.899][3] [6190] Using pmic info 0x20009/0x10013/0x0/0x0 for device 0x20009/0x10113/0x0/0x0
 [    0.904229 / 01-01 00:00:00.899][3] [6190]  => KSUT verifier enabled
 [    0.904262 / 01-01 00:00:00.899][3] [6190] ksut_global_msm8992 is loaded
 [    0.904283 / 01-01 00:00:00.899][3] [6190] No unlock key!
 [    0.904332 / 01-01 00:00:00.899][3] [6190] [CCAudit] Enter the boot_linux for kernel startup,,,
 [    0.904360 / 01-01 00:00:00.899][3] [6190] bootcmd: lge.rev=rev_10
 [    0.904392 / 01-01 00:00:00.899][3] [6190] bootcmd: model.name=LG-H918
 [    0.904425 / 01-01 00:00:00.899][3] [6190] bootcmd: lge.bootreason=normal
 [    0.904449 / 01-01 00:00:00.899][3] [6190] bootcmd: cc_mode=0
 [    0.904472 / 01-01 00:00:00.899][3] [6190] bootcmd: kswitch
 [    0.904511 / 01-01 00:00:00.899][3] [6190] bootcmd: lge.bootreasoncode=0x77665501
 [    0.904544 / 01-01 00:00:00.899][3] [6190] bootcmd: bootcable.type=400MA
 [    0.904576 / 01-01 00:00:00.899][3] [6190] bootcmd: lge.battid=SW3800_VC0
 [    0.904619 / 01-01 00:00:00.899][3] [6190] bootcmd: androidboot.bl_unlock_complete=true
 [    0.904654 / 01-01 00:00:00.899][3] [6190] bootcmd: androidboot.dlcomplete=0
 [    0.904694 / 01-01 00:00:00.899][3] [6190] bootcmd: androidboot.ddr_size=4294967296
 [    0.904729 / 01-01 00:00:00.899][3] [6190] bootcmd: androidboot.ddr_info=0x6
 [    0.904762 / 01-01 00:00:00.899][3] [6190] bootcmd: lge.crash_handler=off
 [    0.904789 / 01-01 00:00:00.899][3] [6190] bootcmd: lge.hreset=off
 [    0.904816 / 01-01 00:00:00.899][3] [6190] bootcmd: boot_cpus=0-3
 [    0.904851 / 01-01 00:00:00.899][3] [6190] bootcmd: androidboot.revision=12
 [    0.904884 / 01-01 00:00:00.899][3] [6190] bootcmd: lge.signed_image=false
 [    0.904928 / 01-01 00:00:00.899][3] [6190] bootcmd: androidboot.verifiedbootstate=orange
 [    0.904969 / 01-01 00:00:00.899][3] [6190] bootcmd: androidboot.veritymode=enforcing
 [    0.905004 / 01-01 00:00:00.899][3] [6190] bootcmd: androidboot.rpmb_state=1
 [    0.905040 / 01-01 00:00:00.899][3] [6190] pm8x41_get_is_cold_boot: Warm boot
 [    0.905109 / 01-01 00:00:00.899][3] [6190] target_pause_for_battery_charge : pon_reason is 160 cold_boot:0 charger path: 4
 [    0.905137 / 01-01 00:00:00.899][3] [6190] PON_PON_PBL_STATUS:0xc0
 [    0.905162 / 01-01 00:00:00.899][3] [6190] PON_PON_REASON1:0xa0
 [    0.905192 / 01-01 00:00:00.899][3] [6190] PON_WARM_RESET_REASON1:0x2
 [    0.905222 / 01-01 00:00:00.899][3] [6190] PON_WARM_RESET_REASON2:0x0
 [    0.905248 / 01-01 00:00:00.899][3] [6190] PON_POFF_REASON1:0x0
 [    0.905274 / 01-01 00:00:00.899][3] [6190] PON_POFF_REASON2:0x0
 [    0.905304 / 01-01 00:00:00.899][3] [6190] PON_SOFT_RESET_REASON1:0x0
 [    0.905334 / 01-01 00:00:00.899][3] [6190] PON_SOFT_RESET_REASON2:0x0
 [    0.905361 / 01-01 00:00:00.899][3] [6190] TEMP_ALARM_STATUS1:0x80
 [    0.905395 / 01-01 00:00:00.899][3] [6190] SMBCHG_USB_CHGPTH_INT_RT_STS:0x4
 [    0.905439 / 01-01 00:00:00.899][3] [6190] target_pause_for_battery_charge: normal boot
 [    0.905475 / 01-01 00:00:00.899][3] [6190] oem.panel D : sw49407_qhd_dsc_cmd 
 [    0.905567 / 01-01 00:00:00.899][3] [6190] display kernel cmdline: mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi
 [    0.905603 / 01-01 00:00:00.899][3] [6190] pm8x41_get_is_cold_boot: Warm boot
 [    0.905840 / 01-01 00:00:00.899][3] [6190] cmdline: androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.selinux=permissive buildvariant=userdebug lge.rev=rev_10 model.name=LG-H918 lge.bootreason=normal cc_mode=0 [6190] bootcmd_list_deinit : remove all bootcmd_arg
 [    0.905871 / 01-01 00:00:00.899][3] [6190] Updating device tree: start
 [    0.905901 / 01-01 00:00:00.899][3] [6200] Updating device tree: done
 [    0.905938 / 01-01 00:00:00.899][3] [6200] oem.panel D : sw49407_qhd_dsc_cmd 
 [    0.905967 / 01-01 00:00:00.899][3] [6200] Turn off MIPI_CMD_PANEL.
 [    0.906012 / 01-01 00:00:00.899][3] [6200] Continuous splash enabled, keeping panel alive.
 [    0.906034 / 01-01 00:00:00.899][3] [6200] RPM GLINK UnInit
 [    0.906067 / 01-01 00:00:00.899][3] [6200] Qseecom De-Init Done in Appsbl
 [    0.906144 / 01-01 00:00:00.899][3] [6200] booting linux @ 0x80080000, ramdisk @ 0x82200000 (2431986), tags/device tree @ 0x82000000
 [    0.906176 / 01-01 00:00:00.899][3] [6200] Jumping to kernel via monitor
 [    0.906183 / 01-01 00:00:00.899][3] 
 [    0.906190 / 01-01 00:00:00.899][3] bootlog_probe: token           (null)
 [    0.906196 / 01-01 00:00:00.899][3] -------------------------------------------------
 [    0.906208 / 01-01 00:00:00.899][3] Trying to free nonexistent resource <00000000c00c0000-00000000c00dffff>
 [    0.907795 / 01-01 00:00:00.899][0] [UART CONSOLE][earjack_debugger_probe] disable uart console
 [    0.907823 / 01-01 00:00:00.899][0] earjack debugger probed
 [    0.911212 / 01-01 00:00:00.909][2] LGE GPIO debugger init done
 [    0.911504 / 01-01 00:00:00.909][2] [QFUSE]lge_qfprom_probe : qfprom init
 [    0.913184 / 01-01 00:00:00.909][2] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe starts!!!
 [    0.913319 / 01-01 00:00:00.909][2] [LGE-ADC] lge_adc_qct_probe : Not yet initializing pm-vadc
 [    0.914237 / 01-01 00:00:00.909][2] [LGE-CD] cable_detect_probe : lge_cable_detect probe start!
 [    0.914282 / 01-01 00:00:00.909][2] [LGE-CD] cable_detect_probe : lge_adc property failed to get
 [    0.915246 / 01-01 00:00:00.909][2] [LGE-CC] lge_charging_controller_probe : LG Charging controller probe done~!!
 [    0.915279 / 01-01 00:00:00.909][2] lge_power_changed_work
 [    0.916254 / 01-01 00:00:00.909][2] [LGE-HW_REV] lge_hw_rev_probe : Probe Start~!!
 [    0.916270 / 01-01 00:00:00.909][2] [LGE-HW_REV] lge_hw_rev_probe : HW_REV : rev_10
 [    0.916363 / 01-01 00:00:00.909][2] [LGE-HW_REV] lge_hw_rev_probe : Probe done~!!
 [    0.916382 / 01-01 00:00:00.909][2] lge_power_changed_work
 [    0.917319 / 01-01 00:00:00.909][2] [LGE-SM] lge_store_mode_probe : LG Store mode probe Start~!!
 [    0.917430 / 01-01 00:00:00.909][2] [LGE-SM] lge_store_mode_probe : LG store mode probe done~!!
 [    0.917449 / 01-01 00:00:00.909][2] lge_power_changed_work
 [    0.918736 / 01-01 00:00:00.909][2] uart_tx_gpio is not available
 [    0.918755 / 01-01 00:00:00.909][2] uart_rx_gpio is not available
 [    0.918762 / 01-01 00:00:00.909][2] uart_cts_gpio is not available
 [    0.918769 / 01-01 00:00:00.909][2] uart_rfr_gpio is not available
 [    0.918777 / 01-01 00:00:00.909][2] msm_hs_dt_to_pdata:Out of Band sleep flag is set
 [    0.918852 / 01-01 00:00:00.909][2] Wakeup irq not specified.
 [    0.918991 / 01-01 00:00:00.909][2] msm_serial_hs 7570000.uart: msm_hs_probe: error creating logging context
 [    0.919735 / 01-01 00:00:00.909][3] sps: BAM device 0x0000000007544000 is not registered yet.
 [    0.919762 / 01-01 00:00:00.909][3] sps:BAM 0x0000000007544000 is registered.
 [    0.920008 / 01-01 00:00:00.909][3] msm_serial_hs 7570000.uart: msm_hs_probe: error creating tx logging context
 [    0.920045 / 01-01 00:00:00.919][3] msm_serial_hs 7570000.uart: msm_hs_probe: error creating rx logging context
 [    0.920055 / 01-01 00:00:00.919][3] msm_serial_hs 7570000.uart: msm_hs_probe: error creating usr logging context
 [    0.921239 / 01-01 00:00:00.919][3] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART
 [    0.923481 / 01-01 00:00:00.919][3] msm_serial_hs module loaded
 [    0.924310 / 01-01 00:00:00.919][3] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
 [    0.924361 / 01-01 00:00:00.919][3] AXI: get_pdata(): Error: Client name not found
 [    0.924369 / 01-01 00:00:00.919][3] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
 [    0.924376 / 01-01 00:00:00.919][3] msm_serial_hsl_probe: Bus scaling is disabled
 [    0.924513 / 01-01 00:00:00.919][3] 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
 [    0.924616 / 01-01 00:00:00.919][3] msm_hsl_console_setup: console setup on port #0
 [    0.927002 / 01-01 00:00:00.919][3] console [ttyHSL0] enabled
 [    0.927970 / 01-01 00:00:00.919][3] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
 [    0.928059 / 01-01 00:00:00.919][3] AXI: get_pdata(): Error: Client name not found
 [    0.928067 / 01-01 00:00:00.919][3] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
 [    0.928073 / 01-01 00:00:00.919][3] msm_serial_hsl_probe: Bus scaling is disabled
 [    0.928169 / 01-01 00:00:00.919][3] 7574000.serial: ttyHSL1 at MMIO 0x7574000 (irq = 414, base_baud = 460800) is a MSM
 [    0.928615 / 01-01 00:00:00.919][3] msm_serial_hsl_init: driver initialized
 [    0.928643 / 01-01 00:00:00.929][3] smd_tty_log_init: Unable to create IPC log
 [    0.933655 / 01-01 00:00:00.929][3] diag: Failed to create IPC logging context
 [    0.939444 / 01-01 00:00:00.929][3] mts_tty_init success
 [    0.939475 / 01-01 00:00:00.929][3] DM_APP: lge_dm_tty_init
 [    0.939540 / 01-01 00:00:00.929][3] lge_bypass_init
 [    0.939580 / 01-01 00:00:00.929][3] lge_bypass_init: success
 [    0.951178 / 01-01 00:00:00.949][3] brd: module loaded
 [    0.952391 / 01-01 00:00:00.949][3] loop: module loaded
 [    0.952573 / 01-01 00:00:00.949][3] zram: Created 1 device(s)
 [    0.953611 / 01-01 00:00:00.949][3] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
 [    0.953653 / 01-01 00:00:00.949][3] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
 [    0.953663 / 01-01 00:00:00.949][3] QSEECOM: qseecom_probe: no-clock-support=0x1<4>[    0.953673 / 01-01 00:00:00.949][3] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
 [    0.954243 / 01-01 00:00:00.949][3] scm_call failed: func id 0x70000006, arginfo: 0x8887, args: 0x0, 0xb3ca7480, 0x80, 0x176d7e000, ret: -1, syscall returns: 0x0, 0x0, 0x0
 [    0.954254 / 01-01 00:00:00.949][3] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
 [    0.957800 / 01-01 00:00:00.949][3] IrRC: uei,reset-gpio: 995
 [    0.958271 / 01-01 00:00:00.949][3] i2c-core: driver [tabla-i2c-core] using legacy suspend method
 [    0.958279 / 01-01 00:00:00.949][3] i2c-core: driver [tabla-i2c-core] using legacy resume method
 [    0.958339 / 01-01 00:00:00.949][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
 [    0.958346 / 01-01 00:00:00.949][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
 [    0.958401 / 01-01 00:00:00.949][3] i2c-core: driver [tasha-i2c-core] using legacy suspend method
 [    0.958408 / 01-01 00:00:00.949][3] i2c-core: driver [tasha-i2c-core] using legacy resume method
 [    0.960242 / 01-01 00:00:00.959][3] Loading PN547 driver
 [    0.960331 / 01-01 00:00:00.959][0] pn547: Start async init
 [    0.961581 / 01-01 00:00:00.959][0] pn547: pn547_probe() start
 [    0.961823 / 01-01 00:00:00.959][0] pn547:IRQ : 9
 [    0.961823 / 01-01 00:00:00.959][0] VEN : 12
 [    0.961823 / 01-01 00:00:00.959][0] FIRM : 11
 [    0.961995 / 01-01 00:00:00.959][0] pn547_probe : requesting IRQ 273
 [    0.962131 / 01-01 00:00:00.959][0] pn547: pn547_probe() end
 [    0.962193 / 01-01 00:00:00.959][0] pn547: Loading PN547 driver Success! 
 [    0.962747 / 01-01 00:00:00.959][3] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
 [    0.962761 / 01-01 00:00:00.959][3] qce 660000.qcedev: CE device = 0x0
 [    0.962761 / 01-01 00:00:00.959][3] , IO base, CE = 0xffffff8003ac0000
 [    0.962761 / 01-01 00:00:00.959][3] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
 [    0.962761 / 01-01 00:00:00.959][3] IO base BAM = 0x          (null)
 [    0.962761 / 01-01 00:00:00.959][3] BAM IRQ 156
 [    0.962761 / 01-01 00:00:00.959][3] Engines Availability = 0x2011053
 [    0.962816 / 01-01 00:00:00.959][3] sps:BAM 0x0000000000644000 is registered.
 [    0.963014 / 01-01 00:00:00.959][3] sps:BAM 0x0000000000644000 (va:0xffffff8003b40000) enabled: ver:0x27, number of pipes:16
 [    0.963031 / 01-01 00:00:00.959][3] sps:BAM 0x0000000000644000 pipe 3 sharing violation
 [    0.963038 / 01-01 00:00:00.959][3] sps:Failed to connect BAM 0xffffffc033cbf400 pipe 3
 [    0.963047 / 01-01 00:00:00.959][3] QCE50: qce_sps_init_ep_conn: sps_connect() fail pipe_handle=0xffffffc033cbf800, rc = -1
 [    0.963071 / 01-01 00:00:00.959][3] sps:De-init client in connected state: 0x1535053
 [    0.963135 / 01-01 00:00:00.959][3] qce: probe of 660000.qcedev failed with error -1
 [    0.965436 / 01-01 00:00:00.959][3] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
 [    0.965458 / 01-01 00:00:00.959][3] qcrypto 660000.qcrypto: CE device = 0x0
 [    0.965458 / 01-01 00:00:00.959][3] , IO base, CE = 0xffffff8003b80000
 [    0.965458 / 01-01 00:00:00.959][3] , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
 [    0.965458 / 01-01 00:00:00.959][3] IO base BAM = 0x          (null)
 [    0.965458 / 01-01 00:00:00.959][3] BAM IRQ 156
 [    0.965458 / 01-01 00:00:00.959][3] Engines Availability = 0x2011053
 [    0.965518 / 01-01 00:00:00.959][3] sps:BAM 0x0000000000644000 is registered.
 [    0.965711 / 01-01 00:00:00.959][3] sps:BAM 0x0000000000644000 (va:0xffffff8003c00000) enabled: ver:0x27, number of pipes:16
 [    0.965999 / 01-01 00:00:00.959][3] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
 [    0.971948 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-ecb-aes
 [    0.972086 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-cbc-aes
 [    0.972187 / 01-01 00:00:00.969][2] qcrypto 660000.qcrypto: qcrypto-ctr-aes
 [    0.972307 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-ecb-des
 [    0.972407 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-cbc-des
 [    0.972494 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-ecb-3des
 [    0.972582 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-cbc-3des
 [    0.972669 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-xts-aes
 [    0.972763 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-sha1
 [    0.972849 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-sha256
 [    0.972939 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
 [    0.973025 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
 [    0.973112 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
 [    0.973199 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
 [    0.973287 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
 [    0.973374 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
 [    0.973465 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
 [    0.973556 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
 [    0.973644 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-aes-ccm
 [    0.973733 / 01-01 00:00:00.969][3] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
 [    0.976592 / 01-01 00:00:00.969][3] ICE IRQ = 26
 [    0.976744 / 01-01 00:00:00.969][3] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
 [    0.976804 / 01-01 00:00:00.969][3] ICE IRQ = 27
 [    0.982333 / 01-01 00:00:00.979][3] qcom_ice_get_pdevice: found ice device ffffffc0f6dcd000
 [    0.982360 / 01-01 00:00:00.979][3] qcom_ice_get_pdevice: matching platform device ffffffc0f830f000
 [    0.982894 / 01-01 00:00:00.979][3] scm_call failed: func id 0x42000c02, arginfo: 0x2, args: 0x13, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
 [    0.983533 / 01-01 00:00:00.979][3] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
 [    0.983544 / 01-01 00:00:00.979][3] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
 [    0.984556 / 01-01 00:00:00.979][3] scsi host0: ufshcd
 [    0.988366 / 01-01 00:00:00.979][3] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002170000
 [    1.001885 / 01-01 00:00:00.999][3] SCSI Media Changer driver v0.25 
 [    1.006156 / 01-01 00:00:00.999][2] sps: BAM device 0x0000000007584000 is not registered yet.
 [    1.006195 / 01-01 00:00:00.999][2] sps:BAM 0x0000000007584000 is registered.
 [    1.008387 / 01-01 00:00:00.999][2] spi_master spi12: will run message pump with realtime priority
 [    1.010358 / 01-01 00:00:01.009][3] sps:BAM 0x0000000007584000 (va:0xffffff8003c80000) enabled: ver:0x19, number of pipes:24
 [    1.011420 / 01-01 00:00:01.009][3] tun: Universal TUN/TAP device driver, 1.6
 [    1.011432 / 01-01 00:00:01.009][3] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
 [    1.011498 / 01-01 00:00:01.009][3] PPP generic driver version 2.4.2
 [    1.011579 / 01-01 00:00:01.009][3] PPP BSD Compression module registered
 [    1.011588 / 01-01 00:00:01.009][3] PPP Deflate Compression module registered
 [    1.011627 / 01-01 00:00:01.009][3] PPP MPPE Compression module registered
 [    1.011639 / 01-01 00:00:01.009][3] NET: Registered protocol family 24
 [    1.013308 / 01-01 00:00:01.009][3] dhd_init_wlan_mem: WIFI MEM Allocated
 [    1.013324 / 01-01 00:00:01.009][3] bcm_wifi_init_mem successfully
 [    1.013335 / 01-01 00:00:01.009][3] bcm_wifi_init_gpio: target does not use pinctrl for wifi reg on
 [    1.013494 / 01-01 00:00:01.009][3] bcm_wifi_init_gpio: gpio_wlan_power=1011
 [    1.013662 / 01-01 00:00:01.009][3] bcm_wifi_init_gpio: gpio_hostwake=73
 [    1.013671 / 01-01 00:00:01.009][3] bcm_wifi_init_gpio: Failed to request gpio 1011 for bcmdhd_wifi_reg_on:[-16]
 [    1.030078 / 01-01 00:00:01.029][3] bcm_wifi_init_gpio successfully
 [    1.030085 / 01-01 00:00:01.029][3] skip bcm_wifi_power up here
 [    1.030812 / 01-01 00:00:01.029][3] usbcore: registered new interface driver catc
 [    1.030824 / 01-01 00:00:01.029][3] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 [    1.030865 / 01-01 00:00:01.029][3] usbcore: registered new interface driver pegasus
 [    1.030891 / 01-01 00:00:01.029][3] usbcore: registered new interface driver rtl8150
 [    1.030916 / 01-01 00:00:01.029][3] usbcore: registered new interface driver r8152
 [    1.030925 / 01-01 00:00:01.029][3] hso: ../../../../../../kernel/lge/msm8996/drivers/net/usb/hso.c: Option Wireless
 [    1.030984 / 01-01 00:00:01.029][3] usbcore: registered new interface driver hso
 [    1.031017 / 01-01 00:00:01.029][3] usbcore: registered new interface driver asix
 [    1.031043 / 01-01 00:00:01.029][3] usbcore: registered new interface driver ax88179_178a
 [    1.031067 / 01-01 00:00:01.029][3] usbcore: registered new interface driver cdc_ether
 [    1.031093 / 01-01 00:00:01.029][3] usbcore: registered new interface driver cdc_eem
 [    1.031117 / 01-01 00:00:01.029][3] usbcore: registered new interface driver dm9601
 [    1.031142 / 01-01 00:00:01.029][3] usbcore: registered new interface driver sr9700
 [    1.031173 / 01-01 00:00:01.029][3] usbcore: registered new interface driver CoreChips
 [    1.031207 / 01-01 00:00:01.029][3] usbcore: registered new interface driver smsc75xx
 [    1.031239 / 01-01 00:00:01.029][3] usbcore: registered new interface driver smsc95xx
 [    1.031263 / 01-01 00:00:01.029][3] usbcore: registered new interface driver gl620a
 [    1.031290 / 01-01 00:00:01.029][3] usbcore: registered new interface driver net1080
 [    1.031316 / 01-01 00:00:01.029][3] usbcore: registered new interface driver plusb
 [    1.031340 / 01-01 00:00:01.029][3] usbcore: registered new interface driver rndis_host
 [    1.031367 / 01-01 00:00:01.029][3] usbcore: registered new interface driver cdc_subset
 [    1.031391 / 01-01 00:00:01.029][3] usbcore: registered new interface driver zaurus
 [    1.031415 / 01-01 00:00:01.029][3] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
 [    1.031620 / 01-01 00:00:01.029][3] usbcore: registered new interface driver int51x1
 [    1.031644 / 01-01 00:00:01.029][3] usbcore: registered new interface driver kalmia
 [    1.031669 / 01-01 00:00:01.029][3] usbcore: registered new interface driver ipheth
 [    1.031696 / 01-01 00:00:01.029][3] usbcore: registered new interface driver sierra_net
 [    1.031721 / 01-01 00:00:01.029][3] usbcore: registered new interface driver cx82310_eth
 [    1.031755 / 01-01 00:00:01.029][3] usbcore: registered new interface driver cdc_ncm
 [    1.031780 / 01-01 00:00:01.029][3] usbcore: registered new interface driver lg-vl600
 [    1.031804 / 01-01 00:00:01.029][3] usbcore: registered new interface driver qmi_wwan
 [    1.031830 / 01-01 00:00:01.029][3] usbcore: registered new interface driver cdc_mbim
 [    1.032523 / 01-01 00:00:01.029][3] msm_sharedmem: sharedmem_register_qmi: qmi init successful
 [    1.035070 / 01-01 00:00:01.029][2] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
 [    1.039470 / 01-01 00:00:01.029][2] 7411000.qusb supply USB3_GDSC not found, using dummy regulator
 [    1.039792 / 01-01 00:00:01.029][2] 7412000.qusb supply USB3_GDSC not found, using dummy regulator
 [    1.041076 / 01-01 00:00:01.039][0] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
 [    1.043833 / 01-01 00:00:01.039][3] msm-dwc3 6a00000.ssusb: unable to get dbm device
 [    1.047385 / 01-01 00:00:01.039][3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 [    1.047413 / 01-01 00:00:01.039][3] ehci-pci: EHCI PCI platform driver
 [    1.047553 / 01-01 00:00:01.039][3] usbcore: registered new interface driver cdc_acm
 [    1.047561 / 01-01 00:00:01.039][3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 [    1.047592 / 01-01 00:00:01.039][3] usbcore: registered new interface driver cdc_wdm
 [    1.047619 / 01-01 00:00:01.039][3] usbcore: registered new interface driver uas
 [    1.047664 / 01-01 00:00:01.039][3] usbcore: registered new interface driver usb-storage
 [    1.047689 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-alauda
 [    1.047712 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-cypress
 [    1.047736 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-datafab
 [    1.047762 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-freecom
 [    1.047785 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-isd200
 [    1.047808 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-jumpshot
 [    1.047830 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-karma
 [    1.047852 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-onetouch
 [    1.047881 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-realtek
 [    1.047904 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-sddr09
 [    1.047929 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-sddr55
 [    1.047954 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ums-usbat
 [    1.048033 / 01-01 00:00:01.039][3] usbcore: registered new interface driver usbserial
 [    1.048055 / 01-01 00:00:01.039][3] usbcore: registered new interface driver usbserial_generic
 [    1.048076 / 01-01 00:00:01.039][3] usbserial: USB Serial support registered for generic
 [    1.048099 / 01-01 00:00:01.039][3] usbcore: registered new interface driver ftdi_sio
 [    1.048117 / 01-01 00:00:01.039][3] usbserial: USB Serial support registered for FTDI USB Serial Device
 [    1.048144 / 01-01 00:00:01.039][3] usbcore: registered new interface driver pl2303
 [    1.048161 / 01-01 00:00:01.039][3] usbserial: USB Serial support registered for pl2303
 [    1.048186 / 01-01 00:00:01.039][3] usbcore: registered new interface driver usb_ehset_test
 [    1.049004 / 01-01 00:00:01.039][3] anx7688-usbc 6-0028: usb supply not found, deferring probe
 [    1.049844 / 01-01 00:00:01.039][3] gbridge_init: gbridge_init successs.
 [    1.049856 / 01-01 00:00:01.039][3] u_lgeusb init
 [    1.051326 / 01-01 00:00:01.049][3] mousedev: PS/2 mouse device common for all mice
 [    1.051593 / 01-01 00:00:01.049][3] usbcore: registered new interface driver iforce
 [    1.051635 / 01-01 00:00:01.049][3] usbcore: registered new interface driver xpad
 [    1.051662 / 01-01 00:00:01.049][3] usbcore: registered new interface driver usb_acecad
 [    1.051691 / 01-01 00:00:01.049][3] usbcore: registered new interface driver aiptek
 [    1.051719 / 01-01 00:00:01.049][3] usbcore: registered new interface driver gtco
 [    1.051746 / 01-01 00:00:01.049][3] usbcore: registered new interface driver hanwang
 [    1.051772 / 01-01 00:00:01.049][3] usbcore: registered new interface driver kbtab
 [    1.053287 / 01-01 00:00:01.049][3] [Touch] touch_device_init, sic4945 start
 [    1.053343 / 01-01 00:00:01.049][3] [Touch] touch_device_init, sw49407 start
 [    1.054000 / 01-01 00:00:01.049][3] [Touch] touch_spi_probe
 [    1.054000 / 01-01 00:00:01.049][3] , platform ptr =           (null)
 [    1.054013 / 01-01 00:00:01.049][3] [Touch] touch_spi_probe : 25 Mhz, chip_select = 0
 [    1.054020 / 01-01 00:00:01.049][3] [Touch] platform device register
 [    1.054344 / 01-01 00:00:01.049][3] [Touch] start dev.of_node
 [    1.054441 / 01-01 00:00:01.049][3] [Touch] fw_image - 0:touch/elsa/L1L57P1_1_07.img
 [    1.054447 / 01-01 00:00:01.049][3] [Touch] fw_image - 1:touch/elsa/L1L57P1_1_07.img
 [    1.054455 / 01-01 00:00:01.049][3] [Touch] end dev.of_node
 [    1.054465 / 01-01 00:00:01.049][3] [Touch] touch_set_device, data:ffffffc0f6ff9818
 [    1.054472 / 01-01 00:00:01.049][3] [Touch] touch_gpio_init - pin:89, name:touch_reset
 [    1.054489 / 01-01 00:00:01.049][3] [Touch] touch_gpio_direction_output - pin:89, value:0
 [    1.054516 / 01-01 00:00:01.049][3] [Touch] touch_gpio_init - pin:125, name:touch_int
 [    1.054525 / 01-01 00:00:01.049][3] [Touch] touch_gpio_direction_input - pin:125
 [    1.054538 / 01-01 00:00:01.049][3] [Touch] touch_gpio_init - pin:-2, name:touch_make_id
 [    1.054544 / 01-01 00:00:01.049][3] [Touch] touch_gpio_direction_input - pin:-2
 [    1.054618 / 01-01 00:00:01.049][3] spi12.0 supply vdd not found, using dummy regulator
 [    1.054691 / 01-01 00:00:01.049][3] spi12.0 supply vio not found, using dummy regulator
 [    1.055083 / 01-01 00:00:01.049][3] [Touch] pinctrl set active
 [    1.055359 / 01-01 00:00:01.049][3] [Touch] sw49407_power, off
 [    1.055368 / 01-01 00:00:01.049][3] [Touch] touch_gpio_direction_output - pin:89, value:0
 [    1.056424 / 01-01 00:00:01.049][3] [Touch] sw49407_power, on
 [    1.056432 / 01-01 00:00:01.049][3] [Touch] touch_gpio_direction_output - pin:89, value:1
 [    1.056537 / 01-01 00:00:01.049][3] [Touch] touch_init_input 1439-2719-255-1439-2719-90-10
 [    1.056668 / 01-01 00:00:01.049][3] input: touch_dev as /devices/virtual/input/input1
 [    1.056928 / 01-01 00:00:01.049][3] [Touch E] [sw49407_notify 1551] 3 is not supported
 [    1.057098 / 01-01 00:00:01.049][3] [Touch] watch_fontdata_attr_init font_buffer(42 KB) malloc
 [    1.057123 / 01-01 00:00:01.049][3] [Touch] hw_reset_delay : 90 ms
 [    1.057145 / 01-01 00:00:01.049][3] [Touch] platform device registered ...
 [    1.060168 / 01-01 00:00:01.059][3] fpc1020 spi8.1: found pin control fpc1020_spi_active
 [    1.060195 / 01-01 00:00:01.059][3] fpc1020 spi8.1: found pin control fpc1020_reset_reset
 [    1.060202 / 01-01 00:00:01.059][3] fpc1020 spi8.1: found pin control fpc1020_reset_active
 [    1.060209 / 01-01 00:00:01.059][3] fpc1020 spi8.1: found pin control fpc1020_cs_low
 [    1.060216 / 01-01 00:00:01.059][3] fpc1020 spi8.1: found pin control fpc1020_cs_high
 [    1.060223 / 01-01 00:00:01.059][3] fpc1020 spi8.1: found pin control fpc1020_cs_active
 [    1.060230 / 01-01 00:00:01.059][3] fpc1020 spi8.1: found pin control fpc1020_irq_active
 [    1.060296 / 01-01 00:00:01.059][3] fpc1020 spi8.1: fpc1020_probe enable-wakeup 
 [    1.060568 / 01-01 00:00:01.059][3] fpc1020 spi8.1: Enabling hardware
 [    1.063982 / 01-01 00:00:01.059][3] fpc1020 spi8.1: fpc1020_probe: ok
 [    1.064027 / 01-01 00:00:01.059][3] fpc1020_init OK
 [    1.064442 / 01-01 00:00:01.059][3] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
 [    1.064649 / 01-01 00:00:01.059][3] i2c /dev entries driver
 [    1.099161 / 01-01 00:00:01.089][3] vmem: Up and running with 4 banks of memory from [io  size 0x3f0833fec9 64bit window disabled]
 [    1.117584 / 01-01 00:00:01.109][3] msm_actuator_get_dt_data:772 msm_actuator_get_dt_data gpio count -2
 [    1.117618 / 01-01 00:00:01.109][3] msm_camera_pinctrl_init:1378 Getting pinctrl handle failed
 [    1.117627 / 01-01 00:00:01.109][3] msm_camera_power_up:1552 Initialization of pinctrl failed
 [    1.117636 / 01-01 00:00:01.109][3] msm_camera_request_gpio_table:741 invalid gpio_tbl 0000000000000000 / size 0
 [    1.127503 / 01-01 00:00:01.119][3] msm_cci_init:1399: hw_version = 0x10040000
 [    1.127818 / 01-01 00:00:01.119][3] msm_actuator_get_vcm_version:723 msm_actuator_get_vcm_version: [CHECK] vcm_ver(64) rc(0)
 [    1.134519 / 01-01 00:00:01.129][3] msm_camera_request_gpio_table:741 invalid gpio_tbl 0000000000000000 / size 0
 [    1.137130 / 01-01 00:00:01.129][3] msm_eeprom_platform_probe failed 1823
 [    1.137763 / 01-01 00:00:01.129][3] msm_eeprom_platform_probe failed 1823
 [    1.138345 / 01-01 00:00:01.129][3] msm_eeprom_i2c_probe failed 936
 [    1.140164 / 01-01 00:00:01.139][1] [Touch] touch_ic_init Start
 [    1.140200 / 01-01 00:00:01.139][1] [Touch] fb_notif change
 [    1.140213 / 01-01 00:00:01.139][1] [Touch] sw49407_init: charger_state = 0x00
 [    1.140611 / 01-01 00:00:01.139][1] [Touch] info ptr addr read : 0026425C
 [    1.140798 / 01-01 00:00:01.139][1] [Touch] tc status read : 0F7000C0
 [    1.140807 / 01-01 00:00:01.139][1] [Touch] ========== Info ADDR ==========
 [    1.140814 / 01-01 00:00:01.139][1] [Touch] chip_info_addr        : 025C
 [    1.140822 / 01-01 00:00:01.139][1] [Touch] reg_info_addr         : 0264
 [    1.140829 / 01-01 00:00:01.139][1] [Touch] ========== Info ADDR ==========
 [    1.140836 / 01-01 00:00:01.139][1] [Touch] Model ID is loaded
 [    1.140843 / 01-01 00:00:01.139][1] [Touch] Production Test info checksum is ok
 [    1.141535 / 01-01 00:00:01.139][3] msm_ois_platform_probe:1267 msm_ois_platform_probe: No/Error OIS GPIO
 [    1.142484 / 01-01 00:00:01.139][1] [Touch] ==Print PT info Data==
 [    1.142498 / 01-01 00:00:01.139][1] [Touch] version : v1.07, chip : 9, protocol : 4
 [    1.142498 / 01-01 00:00:01.139][1] [Touch] 
 [    1.142498 / 01-01 00:00:01.139][1] [Touch] fpc : 2, lcm : 4, lot : 9
 [    1.142498 / 01-01 00:00:01.139][1] [Touch] product id : L1L57P1
 [    1.142498 / 01-01 00:00:01.139][1] [Touch] flash boot : idle, done, crc : ok
 [    1.142518 / 01-01 00:00:01.139][1] [Touch] ==Print Config Header Data==
 [    1.142526 / 01-01 00:00:01.139][1] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
 [    1.143524 / 01-01 00:00:01.139][1] [Touch] resume ts->lpwg.screen on
 [    1.143699 / 01-01 00:00:01.139][1] [Touch] sw49407_lpwg_control mode = 0
 [    1.143874 / 01-01 00:00:01.139][1] [Touch] swipe disable
 [    1.143883 / 01-01 00:00:01.139][1] [Touch] sw49407_tc_driving = 3, 185
 [    1.144066 / 01-01 00:00:01.139][1] [Touch] DDI Display Mode = 3
 [    1.144417 / 01-01 00:00:01.139][1] [Touch] Reset Cnt : 29
 [    1.145857 / 01-01 00:00:01.139][3] msm_sensor_driver_init Enter
 [    1.147568 / 01-01 00:00:01.139][3] Enter
 [    1.147637 / 01-01 00:00:01.139][3] msm_sensor_get_sub_module_index:309 src_node NULL
 [    1.148223 / 01-01 00:00:01.139][3] qcom,cci-master 0, rc 0
 [    1.148232 / 01-01 00:00:01.139][3] msm_sensor_driver_get_dt_data qcom,mount-angle 90
 [    1.148244 / 01-01 00:00:01.139][3] qcom,misc_regulator (null)
 [    1.148251 / 01-01 00:00:01.139][3] msm_sensor_driver_get_dt_data qcom,mclk-23880000 = 0
 [    1.148264 / 01-01 00:00:01.139][3] g_sctrl[0] ffffffc0f6638000
 [    1.148575 / 01-01 00:00:01.139][3] Enter<3>[    1.148591 / 01-01 00:00:01.139][3] msm_sensor_get_sub_module_index:309 src_node NULL
 [    1.148865 / 01-01 00:00:01.139][3] qcom,cci-master 1, rc 0
 [    1.148871 / 01-01 00:00:01.139][3] msm_sensor_driver_get_dt_data qcom,mount-angle 90
 [    1.148882 / 01-01 00:00:01.139][3] qcom,misc_regulator (null)
 [    1.148889 / 01-01 00:00:01.139][3] msm_sensor_driver_get_dt_data qcom,mclk-23880000 = 0
 [    1.148898 / 01-01 00:00:01.139][3] g_sctrl[2] ffffffc0f6639000
 [    1.149231 / 01-01 00:00:01.139][3] 
 [    1.149231 / 01-01 00:00:01.139][3] 
 [    1.149231 / 01-01 00:00:01.139][3] Enter: msm_sensor_driver_i2c_probeEnter
 [    1.149257 / 01-01 00:00:01.139][3] msm_sensor_get_sub_module_index:309 src_node NULL
 [    1.149454 / 01-01 00:00:01.139][3] qcom,cci-master 0, rc -22
 [    1.149460 / 01-01 00:00:01.139][3] msm_sensor_driver_get_dt_data qcom,mount-angle 270
 [    1.149470 / 01-01 00:00:01.139][3] qcom,misc_regulator (null)
 [    1.149476 / 01-01 00:00:01.139][3] msm_sensor_driver_get_dt_data qcom,mclk-23880000 = 0
 [    1.149485 / 01-01 00:00:01.149][3] g_sctrl[1] ffffffc0f663a000
 [    1.155214 / 01-01 00:00:01.149][3] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
 [    1.155246 / 01-01 00:00:01.149][3] MSM-CPP cpp_init_hardware:885 stream_cnt:0
 [    1.169134 / 01-01 00:00:01.169][3] __msm_jpeg_init:1537] Jpeg Device id 0
 [    1.170351 / 01-01 00:00:01.169][3] __msm_jpeg_init:1537] Jpeg Device id 2<6>[    1.170411 / 01-01 00:00:01.169][1] [Touch] sw49407_te_info : 545, 16.63 ms, 60.11 hz
 [    1.170477 / 01-01 00:00:01.169][1] [Touch] get fwpath from def_fwpath : rev:0
 [    1.170485 / 01-01 00:00:01.169][1] [Touch] fwpath[touch/elsa/L1L57P1_1_07.img]
 [    1.171030 / 01-01 00:00:01.169][3] __msm_jpeg_init:1537] Jpeg Device id 3
 [    1.176000 / 01-01 00:00:01.169][3] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
 [    1.225271 / 01-01 00:00:01.219][0] ufshcd 624000.ufshc: [LGE][UFS] update quirks, manufacturerid:65535, model:ANY_MODEL, quirk:0x80
 [    1.229437 / 01-01 00:00:01.219][0] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
 [    1.229564 / 01-01 00:00:01.229][0] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
 [    1.230517 / 01-01 00:00:01.229][0] scsi 0:0:0:49488: Well-known LUN    SKhynix  H28U74301AMR     E005 PQ: 0 ANSI: 6
 [    1.231688 / 01-01 00:00:01.229][0] scsi 0:0:0:49456: Well-known LUN    SKhynix  H28U74301AMR     E005 PQ: 0 ANSI: 6
 [    1.232707 / 01-01 00:00:01.229][0] scsi 0:0:0:49476: Well-known LUN    SKhynix  H28U74301AMR     E005 PQ: 0 ANSI: 6
 [    1.233883 / 01-01 00:00:01.229][3] scsi 0:0:0:0: Direct-Access     SKhynix  H28U74301AMR     E005 PQ: 0 ANSI: 6
 [    1.234548 / 01-01 00:00:01.229][3] scsi 0:0:0:1: Direct-Access     SKhynix  H28U74301AMR     E005 PQ: 0 ANSI: 6
 [    1.235075 / 01-01 00:00:01.229][3] scsi 0:0:0:2: Direct-Access     SKhynix  H28U74301AMR     E005 PQ: 0 ANSI: 6
 [    1.235598 / 01-01 00:00:01.229][3] scsi 0:0:0:3: Direct-Access     SKhynix  H28U74301AMR     E005 PQ: 0 ANSI: 6
 [    1.236132 / 01-01 00:00:01.229][3] scsi 0:0:0:4: Direct-Access     SKhynix  H28U74301AMR     E005 PQ: 0 ANSI: 6
 [    1.236671 / 01-01 00:00:01.229][3] scsi 0:0:0:5: Direct-Access     SKhynix  H28U74301AMR     E005 PQ: 0 ANSI: 6
 [    1.237208 / 01-01 00:00:01.229][3] scsi 0:0:0:6: Direct-Access     SKhynix  H28U74301AMR     E005 PQ: 0 ANSI: 6
 [    1.243448 / 01-01 00:00:01.239][3]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21
 [    1.245153 / 01-01 00:00:01.239][2]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
 [    1.245456 / 01-01 00:00:01.239][1]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29
 [    1.245537 / 01-01 00:00:01.239][3]  sdd: sdd1 sdd2 sdd3 sdd4 sdd5
 [    1.245990 / 01-01 00:00:01.239][2]  sdg: sdg1 sdg2
 [    1.246169 / 01-01 00:00:01.239][0]  sdf: sdf1 sdf2 sdf3 sdf4 sdf5
 [    1.247604 / 01-01 00:00:01.239][3]  sdc: sdc1 sdc2 sdc3
 [    1.270067 / 01-01 00:00:01.269][2] msm_fd aa4000.qcom,fd: Face detection halt timeout
 [    1.270690 / 01-01 00:00:01.269][2] drv probe : 1174 msm_fd 96
 [    1.271701 / 01-01 00:00:01.269][2] usbcore: registered new interface driver uvcvideo
 [    1.271712 / 01-01 00:00:01.269][2] USB Video Class driver (1.1.1)
 [    1.272042 / 01-01 00:00:01.269][2] SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
 [    1.272185 / 01-01 00:00:01.269][2] SMBCHG: smbchg_probe: USB supply not found, deferring probe
 [    1.272685 / 01-01 00:00:01.269][2] FG: fg_of_init: Using external sense
 [    1.272695 / 01-01 00:00:01.269][2] FG: fg_of_init: batt_profile_enabled : 1
 [    1.272702 / 01-01 00:00:01.269][2] FG: fg_of_init: lge_rid_disable : 0
 [    1.272717 / 01-01 00:00:01.269][2] FG: fg_of_init: rconn_mohm : 30
 [    1.273449 / 01-01 00:00:01.269][2] FG: cc_soc_store_work: nom_cap_uah zero!
 [    1.274037 / 01-01 00:00:01.269][2] FG: fg_batt_missing_irq_handler: batt-missing triggered: present
 [    1.288993 / 01-01 00:00:01.279][3] FG: fg_probe: rbias software control : 0
 [    1.289079 / 01-01 00:00:01.279][3] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
 [    1.291969 / 01-01 00:00:01.289][3] FG: fg_set_resume_soc: recharge_M resume soc lowered to 0xf7
 [    1.292496 / 01-01 00:00:01.289][2] panic-handler: free[@0xc0100000+@0xc00000)
 [    1.331953 / 01-01 00:00:01.329][3] device-mapper: uevent: version 1.0.3
 [    1.332122 / 01-01 00:00:01.329][3] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
 [    1.332229 / 01-01 00:00:01.329][3] device-mapper: req-crypt: dm-req-crypt successfully initalized.
 [    1.332229 / 01-01 00:00:01.329][3] 
 [    1.334404 / 01-01 00:00:01.329][3] Bluetooth: bluesleep_init: BlueSleep Mode Driver Ver 1.2
 [    1.335557 / 01-01 00:00:01.329][3] Bluetooth: ffffffc0f889bb20Bluetooth: ffffffc0f889bb20
 [    1.336299 / 01-01 00:00:01.329][3] sdhci: Secure Digital Host Controller Interface driver
 [    1.336312 / 01-01 00:00:01.329][3] sdhci: Copyright(c) Pierre Ossman
 [    1.336322 / 01-01 00:00:01.329][3] sdhci-pltfm: SDHCI platform and OF driver helper
 [    1.337341 / 01-01 00:00:01.329][3] qcom_ice_get_pdevice: found ice device ffffffc0f6fe0000
 [    1.337355 / 01-01 00:00:01.329][3] qcom_ice_get_pdevice: matching platform device ffffffc0f830f400
 [    1.337785 / 01-01 00:00:01.329][3] sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
 [    1.352162 / 01-01 00:00:01.349][0] sdhci_msm 74a4900.sdhci: No vmmc regulator found
 [    1.352191 / 01-01 00:00:01.349][0] sdhci_msm 74a4900.sdhci: No vqmmc regulator found
 [    1.352567 / 01-01 00:00:01.349][0] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
 [    1.400467 / 01-01 00:00:01.399][0] drv probe : 1337 sdhci_msm 62
 [    1.411780 / 01-01 00:00:01.409][0] hidraw: raw HID events driver (C) Jiri Kosina
 [    1.413704 / 01-01 00:00:01.409][0] usbcore: registered new interface driver usbhid
 [    1.413723 / 01-01 00:00:01.409][0] usbhid: USB HID core driver
 [    1.414361 / 01-01 00:00:01.409][0] ashmem: initialized
 [    1.414500 / 01-01 00:00:01.409][0] logger: created 256K log 'log_main'
 [    1.414587 / 01-01 00:00:01.409][0] logger: created 256K log 'log_events'
 [    1.414683 / 01-01 00:00:01.409][0] logger: created 256K log 'log_radio'
 [    1.414789 / 01-01 00:00:01.409][0] logger: created 256K log 'log_system'
 [    1.416045 / 01-01 00:00:01.409][0] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
 [    1.428628 / 01-01 00:00:01.419][2] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
 [    1.430473 / 01-01 00:00:01.429][2] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
 [    1.430523 / 01-01 00:00:01.429][2] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
 [    1.433232 / 01-01 00:00:01.429][2] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
 [    1.437416 / 01-01 00:00:01.429][3] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
 [    1.437537 / 01-01 00:00:01.429][3] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
 [    1.437650 / 01-01 00:00:01.429][3] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
 [    1.437753 / 01-01 00:00:01.429][3] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
 [    1.438790 / 01-01 00:00:01.429][3] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
 [    1.441393 / 01-01 00:00:01.439][3] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 3.0
 [    1.441661 / 01-01 00:00:01.439][3] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-310C-V005-20160617_153829_12623
 [    1.442247 / 01-01 00:00:01.439][3] usbcore: registered new interface driver snd-usb-audio
 [    1.442285 / 01-01 00:00:01.439][3] usbcore: registered new interface driver snd-ua101
 [    1.442319 / 01-01 00:00:01.439][3] usbcore: registered new interface driver snd-usb-caiaq
 [    1.442352 / 01-01 00:00:01.439][3] usbcore: registered new interface driver snd-usb-6fire
 [    1.444516 / 01-01 00:00:01.439][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
 [    1.444550 / 01-01 00:00:01.439][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
 [    1.444696 / 01-01 00:00:01.439][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
 [    1.444714 / 01-01 00:00:01.439][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
 [    1.445931 / 01-01 00:00:01.439][3] es9218_init()
 [    1.445972 / 01-01 00:00:01.439][3] es9218_probe
 [    1.445984 / 01-01 00:00:01.439][3] es9218_hw_rev_check() lg board2 rev_(12)
 [    1.446040 / 01-01 00:00:01.439][3] es9218_populate_get_pdata: reset gpio 989
 [    1.446056 / 01-01 00:00:01.439][3] es9218_populate_get_pdata: hph switch 1013<6>[    1.446072 / 01-01 00:00:01.439][3] es9218_populate_get_pdata: power gpio 1014
 [    1.446220 / 01-01 00:00:01.439][3] es9218_probe() g_ess_rev:2
 [    1.446238 / 01-01 00:00:01.439][3] snd_soc_register_codec ret = 0
 [    1.456432 / 01-01 00:00:01.449][3] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
 [    1.456697 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
 [    1.456708 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.456868 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
 [    1.456879 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.457032 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
 [    1.457042 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.457189 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
 [    1.457199 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.457222 / 01-01 00:00:01.449][3] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
 [    1.457369 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
 [    1.457379 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.457530 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
 [    1.457540 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.457685 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
 [    1.457695 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.457843 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
 [    1.457854 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.457875 / 01-01 00:00:01.449][3] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
 [    1.458017 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
 [    1.458028 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.458179 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
 [    1.458189 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.458334 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
 [    1.458344 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.458492 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
 [    1.458502 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.458524 / 01-01 00:00:01.449][3] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
 [    1.458670 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
 [    1.458681 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.458825 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
 [    1.458834 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.458979 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
 [    1.458989 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.459133 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
 [    1.459143 / 01-01 00:00:01.449][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
 [    1.461687 / 01-01 00:00:01.459][3] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
 [    1.473882 / 01-01 00:00:01.469][3] GACT probability NOT on
 [    1.473904 / 01-01 00:00:01.469][3] Mirror/redirect action on
 [    1.474152 / 01-01 00:00:01.469][3] netem: version 1.3
 [    1.474166 / 01-01 00:00:01.469][3] u32 classifier
 [    1.474172 / 01-01 00:00:01.469][3]     Actions configured
 [    1.474187 / 01-01 00:00:01.469][3] Netfilter messages via NETLINK v0.30.
 [    1.474219 / 01-01 00:00:01.469][3] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
 [    1.474413 / 01-01 00:00:01.469][3] ctnetlink v0.93: registering with nfnetlink.
 [    1.474711 / 01-01 00:00:01.469][3] xt_time: kernel timezone is -0000
 [    1.474731 / 01-01 00:00:01.469][3] 939-23012-001-quicksec-vpnclient-for-android-3.4-3478-b05f514d009c-3478 
 [    1.474736 / 01-01 00:00:01.469][3] vpnclient kernel spd loaded.
 [    1.474880 / 01-01 00:00:01.469][3] ip_tables: (C) 2000-2006 Netfilter Core Team
 [    1.474954 / 01-01 00:00:01.469][3] arp_tables: (C) 2002 David S. Miller
 [    1.474981 / 01-01 00:00:01.469][3] TCP: bic registered
 [    1.474990 / 01-01 00:00:01.469][3] TCP: cubic registered
 [    1.474997 / 01-01 00:00:01.469][3] Initializing XFRM netlink socket
 [    1.475169 / 01-01 00:00:01.469][3] NET: Registered protocol family 10
 [    1.475592 / 01-01 00:00:01.469][3] now = 4294937443, schedule = 4294949491, rounded schedule = 4294949591 => 4294949491
 [    1.475676 / 01-01 00:00:01.469][3] mip6: Mobile IPv6
 [    1.475694 / 01-01 00:00:01.469][3] ip6_tables: (C) 2000-2006 Netfilter Core Team
 [    1.475772 / 01-01 00:00:01.469][3] sit: IPv6 over IPv4 tunneling driver
 [    1.475993 / 01-01 00:00:01.469][3] NET: Registered protocol family 17
 [    1.476011 / 01-01 00:00:01.469][3] NET: Registered protocol family 15
 [    1.476043 / 01-01 00:00:01.469][3] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
 [    1.476053 / 01-01 00:00:01.469][3] Ebtables v2.0 registered
 [    1.476146 / 01-01 00:00:01.469][3] l2tp_core: L2TP core driver, V2.0
 [    1.476160 / 01-01 00:00:01.469][3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
 [    1.476167 / 01-01 00:00:01.469][3] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
 [    1.476183 / 01-01 00:00:01.469][3] l2tp_netlink: L2TP netlink interface
 [    1.476203 / 01-01 00:00:01.469][3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
 [    1.476233 / 01-01 00:00:01.469][3] l2tp_debugfs: L2TP debugfs support
 [    1.476241 / 01-01 00:00:01.469][3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
 [    1.477135 / 01-01 00:00:01.469][3] NET: Registered protocol family 27
 [    1.478891 / 01-01 00:00:01.469][1] usb_otg_vreg: no parameters
 [    1.478972 / 01-01 00:00:01.469][1] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
 [    1.479040 / 01-01 00:00:01.469][1] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
 [    1.481613 / 01-01 00:00:01.479][1] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
 [    1.482752 / 01-01 00:00:01.479][1] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
 [    1.484084 / 01-01 00:00:01.479][1] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
 [    1.484774 / 01-01 00:00:01.479][1] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
 [    1.484995 / 01-01 00:00:01.479][1] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe starts!!!
 [    1.485096 / 01-01 00:00:01.479][1] [LGE-ADC] lge_adc_qct_probe : XO_THERM_CH : 114, PA0_THERM_CH : 117, PA1_THERM_CH : 119
 [    1.485105 / 01-01 00:00:01.479][1] [LGE-ADC] lge_adc_qct_probe : BD1_THERM_CH : 255, BD2_THERM_CH : 116
 [    1.485112 / 01-01 00:00:01.479][1] [LGE-ADC] lge_adc_qct_probe : BATT_THERM_CH : -22, USB_ID_CH : 57
 [    1.485224 / 01-01 00:00:01.479][1] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe done!!!
 [    1.485244 / 01-01 00:00:01.479][1] lge_power_changed_work
 [    1.485387 / 01-01 00:00:01.479][1] [LGE-CD] cable_detect_probe : lge_cable_detect probe start!
 [    1.485531 / 01-01 00:00:01.479][1] lge_power_changed_work
 [    1.485550 / 01-01 00:00:01.479][1] [LGE-CC] lgcc_vote_fcc_update : lgcc_vote: vote id[0], set cur[3100]
 [    1.485575 / 01-01 00:00:01.479][1] [LGE-CC] lge_check_typec_work : Check c-type cable
 [    1.485585 / 01-01 00:00:01.479][1] [LGE-CC] lge_hvdcp_set_ibat_work : Check HVDCP
 [    1.485593 / 01-01 00:00:01.479][1] lge_power_changed_work
 [    1.486964 / 01-01 00:00:01.479][1] [LGE-CD] cable_detect_read_cable_info : adc = 1793000
 [    1.486973 / 01-01 00:00:01.479][1] [LGE-CD] cable_detect_read_cable_info : cable info --> 14
 [    1.486979 / 01-01 00:00:01.479][1] [LGE-CD] cable_detect_probe : cable_detect probe end!
 [    1.488142 / 01-01 00:00:01.479][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
 [    1.503850 / 01-01 00:00:01.499][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
 [    1.505858 / 01-01 00:00:01.499][1] sps:BAM 0x0000000006b04000 is registered.
 [    1.506661 / 01-01 00:00:01.499][1] [LGE-CD] lge_cable_detect_external_power_changed : ibat 500000, iusb 500000
 [    1.506718 / 01-01 00:00:01.499][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
 [    1.506889 / 01-01 00:00:01.499][1] lge_power_changed_work
 [    1.506929 / 01-01 00:00:01.499][1] [LGE-CC] lge_check_typec_work : Check c-type cable
 [    1.506940 / 01-01 00:00:01.499][1] [LGE-CC] lge_hvdcp_set_ibat_work : Check HVDCP
 [    1.508455 / 01-01 00:00:01.499][1] anx7688-usbc 6-0028: battery supply not found, deferring probe
 [    1.508555 / 01-01 00:00:01.499][1] SMBCHG: smbchg_probe: Success get LG power class property
 [    1.508697 / 01-01 00:00:01.499][1] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
 [    1.508766 / 01-01 00:00:01.499][1] SMBCHG: smbchg_check_chg_version: pmic=PMI8996, wa_flags=0xf0, hvdcp_supported=true
 [    1.508796 / 01-01 00:00:01.499][1] SMBCHG: smb_parse_dt: parallel usb thr: 1400, 9v thr: 900
 [    1.508924 / 01-01 00:00:01.499][1] smbcharger_charger_otg: no parameters
 [    1.509061 / 01-01 00:00:01.499][1] smbcharger_external_otg: no parameters
 [    1.509101 / 01-01 00:00:01.499][1] smbcharger_external_otg: supplied by pmi8994_boost_5v
 [    1.509190 / 01-01 00:00:01.499][1] SMBCHG: smbchg_hw_init: Charger Revision DIG: 2.0; ANA: 2.1
 [    1.509257 / 01-01 00:00:01.499][1] SMBCHG: smbchg_set_aicl_rerun_period_s: aicl rerun period set to 45s
 [    1.509712 / 01-01 00:00:01.499][1] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
 [    1.509719 / 01-01 00:00:01.499][1] SMBCHG: battchg_suspend: 1 voting for 0 - off
 [    1.509786 / 01-01 00:00:01.499][1] SMBCHG: smbchg_hw_init: set vfloat to 4400
 [    1.509850 / 01-01 00:00:01.499][1] SMBCHG: smbchg_iterm_set: set tcc (100) to 0x02
 [    1.510139 / 01-01 00:00:01.509][1] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
 [    1.510149 / 01-01 00:00:01.509][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [    1.510216 / 01-01 00:00:01.509][1] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
 [    1.510404 / 01-01 00:00:01.509][1] vote: name[SMBCHG: usb_suspend], client_id[0], state[0], val[0]
 [    1.510412 / 01-01 00:00:01.509][1] SMBCHG: usb_suspend: 0 voting for 0 - off
 [    1.510418 / 01-01 00:00:01.509][1] vote: name[SMBCHG: dc_suspend], client_id[0], state[0], val[0]
 [    1.510481 / 01-01 00:00:01.509][1] SMBCHG: dc_suspend: 0 voting for 0 - off
 [    1.510876 / 01-01 00:00:01.509][1] vote: name[SMBCHG: dcl_icl], client_id[0], state[1], val[1500]
 [    1.510884 / 01-01 00:00:01.509][1] SMBCHG: dcl_icl: 0 voting for 1500 - on
 [    1.510890 / 01-01 00:00:01.509][1] SMBCHG: dcl_icl: vote_min min_vote=1500, client_index=0
 [    1.510895 / 01-01 00:00:01.509][1] SMBCHG: dcl_icl: effective vote is now 1500 voted by 0
 [    1.510902 / 01-01 00:00:01.509][1] SMBCHG: smbchg_set_dc_current_max: dc current set to 1500 mA
 [    1.511138 / 01-01 00:00:01.509][1] vote: name[SMBCHG: fcc], client_id[1], state[1], val[3100]
 [    1.511146 / 01-01 00:00:01.509][1] SMBCHG: fcc: 1 voting for 3100 - on
 [    1.511151 / 01-01 00:00:01.509][1] SMBCHG: fcc: vote_min min_vote=3100, client_index=1
 [    1.511251 / 01-01 00:00:01.509][1] SMBCHG: fcc: effective vote is now 3100 voted by 1
 [    1.511355 / 01-01 00:00:01.509][1] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 3100, set to 3000
 [    1.511404 / 01-01 00:00:01.509][1] vote: name[SMBCHG: hwaicl_enable_indirect], client_id[0], state[1], val[0]
 [    1.511411 / 01-01 00:00:01.509][1] SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on
 [    1.511418 / 01-01 00:00:01.509][1] vote: name[SMBCHG: hwaicl_disable], client_id[0], state[0], val[0]
 [    1.511423 / 01-01 00:00:01.509][1] SMBCHG: hwaicl_disable: 0 voting for 0 - off
 [    1.511555 / 01-01 00:00:01.509][1] SMBCHG: batt_pres_handler: triggered: 0x00
 [    1.511562 / 01-01 00:00:01.509][1] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
 [    1.511569 / 01-01 00:00:01.509][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [    1.511612 / 01-01 00:00:01.509][1] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
 [    1.511716 / 01-01 00:00:01.509][1] SMBCHG: usbid_change_handler: triggered
 [    1.511729 / 01-01 00:00:01.509][1] FG: set_resume_soc_work: recharge_M 0(ta)-0(lowered)-0(chg_done)-1(health) 
 [    1.540525 / 01-01 00:00:01.539][1] SMBCHG: get_property_from_typec: typec psy doesn't prepared
 [    1.540567 / 01-01 00:00:01.539][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
 [    1.541197 / 01-01 00:00:01.539][1] SMBCHG: handle_usb_insertion: triggered
 [    1.541241 / 01-01 00:00:01.539][1] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
 [    1.541249 / 01-01 00:00:01.539][1] SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
 [    1.541257 / 01-01 00:00:01.539][1] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[100]
 [    1.541263 / 01-01 00:00:01.539][1] SMBCHG: usb_icl: 0 voting for 100 - on
 [    1.541269 / 01-01 00:00:01.539][1] SMBCHG: usb_icl: vote_min min_vote=100, client_index=0
 [    1.541274 / 01-01 00:00:01.539][1] SMBCHG: usb_icl: effective vote is now 100 voted by 0
 [    1.541280 / 01-01 00:00:01.539][1] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
 [    1.541287 / 01-01 00:00:01.539][1] vote: name[SMBCHG: usb_suspend], client_id[2], state[0], val[0]
 [    1.541293 / 01-01 00:00:01.539][1] SMBCHG: usb_suspend: 2 voting for 0 - off
 [    1.541388 / 01-01 00:00:01.539][1] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
 [    1.541410 / 01-01 00:00:01.539][1] vote: name[SMBCHG: usb_icl], client_id[9], state[1], val[2000]
 [    1.541416 / 01-01 00:00:01.539][1] SMBCHG: usb_icl: 9 voting for 2000 - on
 [    1.541422 / 01-01 00:00:01.539][1] SMBCHG: usb_icl: vote_min min_vote=100, client_index=0
 [    1.541432 / 01-01 00:00:01.539][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: charger type: USB_SDP_CHARGER
 [    1.541448 / 01-01 00:00:01.539][1] [DWC3] factory mode 0
 [    1.541456 / 01-01 00:00:01.539][1] dwc3_floated_chg_check: start check floated charger
 [    1.541584 / 01-01 00:00:01.539][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:0
 [    1.541591 / 01-01 00:00:01.539][1] dwc3_ext_event_notify
 [    1.541609 / 01-01 00:00:01.539][1] msm-dwc3 6a00000.ssusb: undefined state, vbus:online
 [    1.542541 / 01-01 00:00:01.539][1] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x20 (ok)
 [    1.543354 / 01-01 00:00:01.539][1] [LGE-CD] lge_cable_detect_external_power_changed : chg_present 1, prev 0
 [    1.543364 / 01-01 00:00:01.539][1] [LGE-CD] lge_cable_detect_external_power_changed : ibat 500000, iusb 500000
 [    1.543384 / 01-01 00:00:01.539][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
 [    1.543547 / 01-01 00:00:01.539][1] lge_power_changed_work
 [    1.543564 / 01-01 00:00:01.539][1] [LGE-CC] lge_cc_external_lge_power_changed : usb present : 1
 [    1.545409 / 01-01 00:00:01.539][1] SMB1351 smb1351_fastchg_current_set: smb1351_fastchg_current_set - fastchg_current[1000]
 [    1.546157 / 01-01 00:00:01.539][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
 [    1.547208 / 01-01 00:00:01.539][1] SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0
 [    1.547646 / 01-01 00:00:01.539][1] SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4
 [    1.551649 / 01-01 00:00:01.549][1] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
 [    1.551684 / 01-01 00:00:01.549][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:1
 [    1.551692 / 01-01 00:00:01.549][1] dwc3_ext_event_notify
 [    1.571891 / 01-01 00:00:01.569][1] [DWC3] factory mode 0
 [    1.577748 / 01-01 00:00:01.569][1] msm-dwc3 6a00000.ssusb: b_peripheral state, vbus:online
 [    1.577793 / 01-01 00:00:01.569][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
 [    1.578919 / 01-01 00:00:01.569][1] qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
 [    1.578928 / 01-01 00:00:01.569][1] SMBCHG: smbchg_probe: smbchg_probe end
 [    1.578937 / 01-01 00:00:01.569][1] drv probe : 1508 qpnp-smbcharger 70
 [    1.580611 / 01-01 00:00:01.579][1] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
 [    1.580626 / 01-01 00:00:01.579][1] SMBCHG: battchg_suspend: votes unchanged; skipping
 [    1.588625 / 01-01 00:00:01.579][1] usb_otg_vreg: no parameters
 [    1.588914 / 01-01 00:00:01.579][1] usb_otg_vreg: supplied by smbcharger_external_otg
 [    1.590773 / 01-01 00:00:01.589][1] FG: update_sram_data: soc:[50], soc_raw[9238], voltage:[4207128], ocv:[4280065], current:[413968], batt_temp:[-22], charge_raw [0 / 0]
 [    1.590792 / 01-01 00:00:01.589][1] SMBCHG: smbchg_cc_esr_wa_check: ESR count is not zero, skipping
 [    1.590804 / 01-01 00:00:01.589][1] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
 [    1.590876 / 01-01 00:00:01.589][1] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
 [    1.590883 / 01-01 00:00:01.589][1] SMBCHG: usb_icl: 0 voting for 0 - on
 [    1.590889 / 01-01 00:00:01.589][1] SMBCHG: usb_icl: vote_min min_vote=0, client_index=0
 [    1.590895 / 01-01 00:00:01.589][1] SMBCHG: usb_icl: effective vote is now 0 voted by 0
 [    1.590901 / 01-01 00:00:01.589][1] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
 [    1.590908 / 01-01 00:00:01.589][1] vote: name[SMBCHG: usb_suspend], client_id[2], state[1], val[0]
 [    1.590914 / 01-01 00:00:01.589][1] SMBCHG: usb_suspend: 2 voting for 0 - on
 [    1.590954 / 01-01 00:00:01.589][1] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
 [    1.590979 / 01-01 00:00:01.589][1] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
 [    1.590990 / 01-01 00:00:01.589][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [    1.591037 / 01-01 00:00:01.589][2] SMBCHG: power_ok_handler: triggered: 0x00
 [    1.591527 / 01-01 00:00:01.589][2] anx7688-usbc 6-0028:  usb pd max volt: 9000mV, max power: 27000mW,  min power: 3000mW
 [    1.595431 / 01-01 00:00:01.589][3] SMBCHG: fastchg_handler: p2f triggered
 [    1.595451 / 01-01 00:00:01.589][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [    1.612400 / 01-01 00:00:01.609][2] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x21 (ok)
 [    2.100064 / 01-01 00:00:02.099][1] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
 [    2.100105 / 01-01 00:00:02.099][1] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
 [    2.100112 / 01-01 00:00:02.099][1] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
 [    2.610063 / 01-01 00:00:02.609][1] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
 [    2.610098 / 01-01 00:00:02.609][1] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
 [    2.812183 / 01-01 00:00:02.809][3] FG: comp_temp_by_chg_current: fg_temp = 312 comp_temp1 = 282 comp_temp2 = 282 delta1 = -30 delta2 = 0 avg_chg_curr = 0 now_chg_curr = 0 batt_charging = 0
 [    2.812291 / 01-01 00:00:02.809][3] vote: name[SMBCHG: battchg_suspend], client_id[0], state[1], val[0]
 [    2.812297 / 01-01 00:00:02.809][3] SMBCHG: battchg_suspend: 0 voting for 0 - on
 [    2.812303 / 01-01 00:00:02.809][3] SMBCHG: charging_suspend_vote_cb: client[0], suspend[1], last_client[0], last_suspend[1]
 [    2.822079 / 01-01 00:00:02.819][3] FG: update_sram_data: soc:[50], soc_raw[9237], voltage:[4194158], ocv:[4276250], current:[527798], batt_temp:[282], charge_raw [0 / 0]
 [    3.540146 / 01-01 00:00:03.539][1] determine_lge_charging_state : states_change[0], next_state[0], pseudo_chg_ui[0]
 [    3.540161 / 01-01 00:00:03.539][1] LGE charging scenario : state 0 -> 0(0-1), temp=28, volt=4194, BTM=0, charger=1, cur_set=0/0, chg_cur = 527
 [    3.540169 / 01-01 00:00:03.539][1] [LGE-CC] lge_monitor_batt_temp_work : ibatmax_set CHG_BATT_NORMAL_STATE
 [    3.540177 / 01-01 00:00:03.539][1] [LGE-CC] lge_monitor_batt_temp_work : otp_ibat_current=0
 [    3.540184 / 01-01 00:00:03.539][1] [LGE-CC] lge_monitor_batt_temp_work : chg_wake_locked
 [    3.540194 / 01-01 00:00:03.539][1] [LGE-CC] lge_monitor_batt_temp_work : Reported Capacity : 50 / voltage : 4194
 [    3.540446 / 01-01 00:00:03.539][1] lge_power_changed_work
 [    3.540462 / 01-01 00:00:03.539][1] SMBCHG: smbchg_external_lge_power_changed: [LGE-CC] fcc 3100, otp set 3100
 [    3.540469 / 01-01 00:00:03.539][1] SMBCHG: lgcc_set_ibat_current: chg_current[3100]
 [    3.540476 / 01-01 00:00:03.539][1] vote: name[SMBCHG: fcc], client_id[5], state[1], val[3100]
 [    3.540483 / 01-01 00:00:03.539][1] SMBCHG: fcc: 5 voting for 3100 - on
 [    3.540489 / 01-01 00:00:03.539][1] SMBCHG: fcc: vote_min min_vote=3100, client_index=1
 [    3.540495 / 01-01 00:00:03.539][1] vote: name[SMBCHG: battchg_suspend], client_id[2], state[0], val[0]
 [    3.540501 / 01-01 00:00:03.539][1] SMBCHG: battchg_suspend: 2 voting for 0 - off
 [    4.810204 / 01-01 00:00:04.809][3] FG: update_battery_type: battery_id : 187
 [    4.810219 / 01-01 00:00:04.809][3] of_batterydata_get_best_profile: LGE_BL44E1F_LGC_3200mAh found
 [    4.816018 / 01-01 00:00:04.809][3] FG: fg_set_minfreq: Set minfreq enable
 [    4.816068 / 01-01 00:00:04.809][3] FG: fg_batt_profile_init: vbat_est_diff = 1983, v_current_pred: 4192175, v:4194158
 [    4.818920 / 01-01 00:00:04.809][3] FG: fg_set_minfreq: Set minfreq disable
 [    4.818928 / 01-01 00:00:04.809][3] vote: name[SMBCHG: battchg_suspend], client_id[0], state[0], val[0]
 [    4.818934 / 01-01 00:00:04.809][3] SMBCHG: battchg_suspend: 0 voting for 0 - off
 [    4.818939 / 01-01 00:00:04.809][3] SMBCHG: charging_suspend_vote_cb: client[0], suspend[0], last_client[0], last_suspend[0]
 [    4.824962 / 01-01 00:00:04.819][3] FG: fg_batt_profile_init: soc:[98], voltage:[4194158], ocv:[4276250], current:[527798], batt_temp:[282],cycle_count : [0], residence : [126098]
 [    4.825149 / 01-01 00:00:04.819][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
 [    4.825155 / 01-01 00:00:04.819][3] SMBCHG: battchg_suspend: votes unchanged; skipping
 [    4.825215 / 01-01 00:00:04.819][3] SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
 [    4.825222 / 01-01 00:00:04.819][3] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
 [    4.825266 / 01-01 00:00:04.819][3] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
 [    4.825271 / 01-01 00:00:04.819][3] SMBCHG: usb_icl: votes unchanged; skipping
 [    4.825276 / 01-01 00:00:04.819][3] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
 [    4.825282 / 01-01 00:00:04.819][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [    4.825575 / 01-01 00:00:04.819][3] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
 [    4.836625 / 01-01 00:00:04.829][3] FG: update_sram_data: soc:[98], soc_raw[9236], voltage:[4193548], ocv:[4276250], current:[528256], batt_temp:[287], charge_raw [2924453 / 3167000]
 [    5.090553 / 01-01 00:00:05.089][3] anx7688-usbc 6-0028: request_firmware(analogix/mi1_eeprom_20_8b.img)
 [    5.150058 / 01-01 00:00:05.149][3] [anx7688_firmware] cable 8
 [    5.150067 / 01-01 00:00:05.149][3] anx7688-usbc 6-0028: fw version: 0x0(last version:0x208b)
 [    5.150073 / 01-01 00:00:05.149][3] anx7688-usbc 6-0028: enter firmware update
 [    5.772911 / 01-01 00:00:05.769][0] anx7688-usbc 6-0028: firmware update end (622 ms)
 [    9.108171 / 01-01 00:00:09.099][2] anx7688-usbc 6-0028:  VID: 0xaaaa PID: 0x7688 HWREV: 0xac STDALN FW: 0x0
 [    9.112465 / 01-01 00:00:09.109][2] msm_hdmi_register_slimport: sucess 
 [    9.112555 / 01-01 00:00:09.109][3] [anx7688_dp] init_anx7688_dp: init anx7688 dp block
 [    9.112851 / 01-01 00:00:09.109][3] dual_role_usb otg_default: driver failed to report `mode' property: -22
 [    9.112875 / 01-01 00:00:09.109][3] dual_role_usb otg_default: driver failed to report `mode' property: -22
 [    9.113197 / 01-01 00:00:09.109][3] bus probe : 1591 anx7688-usbc 7521
 [    9.114335 / 01-01 00:00:09.109][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
 [    9.114343 / 01-01 00:00:09.109][3] SMBCHG: battchg_suspend: votes unchanged; skipping
 [    9.114371 / 01-01 00:00:09.109][3] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
 [    9.114412 / 01-01 00:00:09.109][3] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
 [    9.114417 / 01-01 00:00:09.109][3] SMBCHG: usb_icl: votes unchanged; skipping
 [    9.114423 / 01-01 00:00:09.109][3] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
 [    9.114430 / 01-01 00:00:09.109][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [    9.114472 / 01-01 00:00:09.109][3] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
 [    9.116842 / 01-01 00:00:09.109][2] Loading compiled-in X.509 certificates
 [    9.117623 / 01-01 00:00:09.109][2] Loaded X.509 cert 'Magrathea: Glacier signing key: f04e57746a35139dccf14db4f56cba4ff3a269fc'
 [    9.120530 / 01-01 00:00:09.119][2] Key type encrypted registered
 [    9.166894 / 01-01 00:00:09.159][0] monitor-thermal soc:lge,monitor-thermal: LGE monitor thermal Initialized
 [    9.167931 / 01-01 00:00:09.159][0] power_sysfs_parse_dt : Total sysfs node is 57
 [    9.167951 / 01-01 00:00:09.159][0] power_sysfs_parse_dt : xo_therm path is mandatory 
 [    9.167961 / 01-01 00:00:09.159][0] power_sysfs_parse_dt : batt_therm path is mandatory 
 [    9.168011 / 01-01 00:00:09.159][0] power_sysfs_parse_dt : health path is mandatory 
 [    9.168034 / 01-01 00:00:09.159][0] power_sysfs_parse_dt : status path is mandatory 
 [    9.168572 / 01-01 00:00:09.159][0] power_sysfs_make_path : pa_therm0 user node didn't have kernel node 
 [    9.168607 / 01-01 00:00:09.159][0] power_sysfs_make_path : ac_online user node didn't have kernel node 
 [    9.168618 / 01-01 00:00:09.159][0] power_sysfs_make_path : wlc_online user node didn't have kernel node 
 [    9.168634 / 01-01 00:00:09.159][0] power_sysfs_make_path : iusb_control user node didn't have kernel node 
 [    9.168643 / 01-01 00:00:09.159][0] power_sysfs_make_path : wlc_thermal_mitigation user node didn't have kernel node 
 [    9.168672 / 01-01 00:00:09.159][0] power_sysfs_make_path : speed_bin user node didn't have kernel node 
 [    9.168680 / 01-01 00:00:09.159][0] power_sysfs_make_path : pvs_bin user node didn't have kernel node 
 [    9.168709 / 01-01 00:00:09.159][0] power_sysfs_probe : Success Power sysfs Init
 [    9.169011 / 01-01 00:00:09.159][0] lge_boost_bypass_init : start
 [    9.169719 / 01-01 00:00:09.159][0] lge_boost_bypass_probe : probe
 [    9.169733 / 01-01 00:00:09.159][0] lge_boost_bypass_parse_dt : name = pmi8994_boostbypass / volt = 3600000/3400000
 [    9.169796 / 01-01 00:00:09.159][0] lge_boost_bypass_regulator_setup : regulator exist
 [    9.169805 / 01-01 00:00:09.159][0] lge_boost_bypass_regulator_setup : vote boost bypass set to on
 [    9.169959 / 01-01 00:00:09.159][3] lge_boost_bypass_probe : success
 [    9.170747 / 01-01 00:00:09.169][3] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
 [    9.170817 / 01-01 00:00:09.169][3] adsprpc: channel link type: 0
 [    9.183161 / 01-01 00:00:09.179][0] RNDIS_IPA module is loaded.
 [    9.183474 / 01-01 00:00:09.179][0] android_usb 66bf0c8.android_usb: device tree enabled
 [    9.183768 / 01-01 00:00:09.179][0] usb_gadget_probe_driver 
 [    9.183781 / 01-01 00:00:09.179][0] gadget name udc->gadget->name dwc3-gadget 
 [    9.183788 / 01-01 00:00:09.179][0] 
 [    9.183788 / 01-01 00:00:09.179][0] ********************************************
 [    9.183793 / 01-01 00:00:09.179][0] 
 [    9.183793 / 01-01 00:00:09.179][0]  No of UDCs: 1
 [    9.183803 / 01-01 00:00:09.179][0]  driver->function: android_usb
 [    9.183807 / 01-01 00:00:09.179][0] 
 [    9.183807 / 01-01 00:00:09.179][0] ********************************************
 [    9.183817 / 01-01 00:00:09.179][0]  udc->gadget->usb_core_id : 0
 [    9.183820 / 01-01 00:00:09.179][0] 
 [    9.183820 / 01-01 00:00:09.179][0]  driver->usb_core_id: 0 
 [    9.183891 / 01-01 00:00:09.179][0] file system registered
 [    9.183939 / 01-01 00:00:09.179][0] mbim_init: initialize 1 instances
 [    9.183999 / 01-01 00:00:09.179][0] mbim_init: Initialized 1 ports
 [    9.185142 / 01-01 00:00:09.179][1] rndis_qc_init: initialize rndis QC instance
 [    9.185348 / 01-01 00:00:09.179][1] Number of LUNs=8
 [    9.185362 / 01-01 00:00:09.179][1] Mass Storage Function, version: 2009/09/11
 [    9.185371 / 01-01 00:00:09.179][1] LUN: removable file: (no medium)
 [    9.185390 / 01-01 00:00:09.179][1] Number of LUNs=1
 [    9.185430 / 01-01 00:00:09.179][1] LUN: removable file: (no medium)
 [    9.185439 / 01-01 00:00:09.179][1] Number of LUNs=1
 [    9.185682 / 01-01 00:00:09.179][1] evp_setup: evp_setup: 
 [    9.185696 / 01-01 00:00:09.179][1] evp_get_product_string: evp_get_product_string: evp convert string, maxV=07E, minV=03C, feature=08
 [    9.185704 / 01-01 00:00:09.179][1] evp_get_product_string: evp_get_product_string: strings_evp = Maxim EVP    gr8rFiV8US07E03C08
 [    9.185715 / 01-01 00:00:09.179][1] android_usb gadget: android_usb ready
 [    9.185722 / 01-01 00:00:09.179][1] udc->gadget->name: dwc3-gadget 
 [    9.188371 / 01-01 00:00:09.179][1] hallic_dev switch registration success
 [    9.188551 / 01-01 00:00:09.179][1] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
 [    9.190260 / 01-05 02:21:50.500][0] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 2016-01-05 02:21:50 UTC (1451960510)
 [    9.194209 / 01-05 02:21:50.500][3] power_supply_callback: BCL state of SoC is 1
 [    9.199873 / 01-05 02:21:50.500][3] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
 [    9.200150 / 01-05 02:21:50.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
 [    9.200350 / 01-05 02:21:50.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
 [    9.200524 / 01-05 02:21:50.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
 [    9.200699 / 01-05 02:21:50.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
 [    9.200877 / 01-05 02:21:50.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
 [    9.201050 / 01-05 02:21:50.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
 [    9.201228 / 01-05 02:21:50.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
 [    9.205511 / 01-05 02:21:50.500][0] vts_probe: vts: xo_therm is registered. chan=114, weight=500
 [    9.205529 / 01-05 02:21:50.500][0] vts_probe: vts: bd_therm_2 is registered. chan=116, weight=270
 [    9.205537 / 01-05 02:21:50.500][0] vts_probe: vts: Add 2 adc(s).
 [    9.205544 / 01-05 02:21:50.500][0] vts_probe: vts: probe done.
 [    9.205585 / 01-05 02:21:50.500][0] vts_probe: led_sensor: All of adc sensors are disabled.
 [    9.205767 / 01-05 02:21:50.500][1] vts_probe: led_sensor: Add 0 adc(s).
 [    9.205778 / 01-05 02:21:50.500][1] vts_probe: led_sensor: probe done.
 [    9.207009 / 01-05 02:21:50.500][1] gpio_keys_gpio_report_event: code(115) state(0)
 [    9.207025 / 01-05 02:21:50.500][1] gpio_keys_gpio_report_event: code(222) state(0)
 [    9.208167 / 01-05 02:21:50.500][1] parse_cpu_levels: idx 1 545
 [    9.208181 / 01-05 02:21:50.500][1] parse_cpu_levels: idx 2 6022
 [    9.208188 / 01-05 02:21:50.500][1] parse_cpu_levels: idx 2 11499
 [    9.208263 / 01-05 02:21:50.500][1] parse_cpu_levels: idx 1 545
 [    9.208270 / 01-05 02:21:50.500][1] parse_cpu_levels: idx 2 6022
 [    9.208277 / 01-05 02:21:50.500][1] parse_cpu_levels: idx 2 11499
 [    9.212205 / 01-05 02:21:50.509][1] qcom,qpnp-flash-led qpnp-flash-led-26: Unable to acquire pinctrl
 [    9.215169 / 01-05 02:21:50.509][1] rmnet_ipa started initialization
 [    9.215186 / 01-05 02:21:50.509][1] IPA SSR support = True
 [    9.215194 / 01-05 02:21:50.509][1] IPA ipa-loaduC = True
 [    9.215201 / 01-05 02:21:50.509][1] IPA SG support = True
 [    9.217359 / 01-05 02:21:50.509][0] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
 [    9.217376 / 01-05 02:21:50.509][0] ipa ipa2_uc_state_check:301 uC is not loaded
 [    9.218156 / 01-05 02:21:50.509][3] rmnet_ipa completed initialization
 [    9.224712 / 01-05 02:21:50.519][3] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
 [    9.226992 / 01-05 02:21:50.519][3] usb_otg_vreg: disabling
 [    9.227081 / 01-05 02:21:50.519][3] wlan_en_vreg: disabling
 [    9.227087 / 01-05 02:21:50.519][3] gdsc_mmagic_bimc: disabling
 [    9.227129 / 01-05 02:21:50.519][3] kryo1-retention: disabling
 [    9.227136 / 01-05 02:21:50.519][3] kryo0-retention: disabling
 [    9.227141 / 01-05 02:21:50.519][3] gfx_mem_acc_corner: disabling
 [    9.227147 / 01-05 02:21:50.519][3] apcc_l3_mem_acc_corner: disabling
 [    9.227152 / 01-05 02:21:50.519][3] apc1_perfcl_mem_acc_corner: disabling
 [    9.227157 / 01-05 02:21:50.519][3] apc0_pwrcl_mem_acc_corner: disabling
 [    9.227167 / 01-05 02:21:50.519][3] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
 [    9.227456 / 01-05 02:21:50.519][3] dhd_module_init in
 [    9.227737 / 01-05 02:21:50.519][3] found wifi platform device bcmdhd_wlan
 [    9.228248 / 01-05 02:21:50.519][3] Power-up adapter 'DHD generic adapter'
 [    9.228257 / 01-05 02:21:50.519][3] wifi_platform_set_power = 1
 [    9.228299 / 01-05 02:21:50.519][3] [BRCM]: gpio_direction_output(1011,1)! ret = 0
 [    9.233607 / 01-05 02:21:50.529][0] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
 [    9.237202 / 01-05 02:21:50.529][0] msm_pcie_enable: PCIe RC0 PHY is ready!
 [    9.247303 / 01-05 02:21:50.539][0] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
 [    9.282706 / 01-05 02:21:50.579][0] msm_pcie_enable: PCIe RC0 link initialized
 [    9.282852 / 01-05 02:21:50.579][0] PCI host bridge /soc/qcom,pcie@00600000 ranges:
 [    9.282866 / 01-05 02:21:50.579][0]   No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
 [    9.282886 / 01-05 02:21:50.579][0]    IO 0x0c200000..0x0c2fffff -> 0x0c200000
 [    9.282898 / 01-05 02:21:50.579][0]   MEM 0x0c300000..0x0cffffff -> 0x0c300000
 [    9.293034 / 01-05 02:21:50.589][0] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
 [    9.293048 / 01-05 02:21:50.589][0] pci_bus 0000:00: root bus resource [bus 00-ff]
 [    9.293059 / 01-05 02:21:50.589][0] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
 [    9.293068 / 01-05 02:21:50.589][0] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
 [    9.293100 / 01-05 02:21:50.589][0] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
 [    9.293147 / 01-05 02:21:50.589][0] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
 [    9.293158 / 01-05 02:21:50.589][0] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
 [    9.293190 / 01-05 02:21:50.589][0] pci 0000:00:00.0: IOMMU is currently not supported for PCI
 [    9.293233 / 01-05 02:21:50.589][0] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
 [    9.293261 / 01-05 02:21:50.589][0] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
 [    9.293557 / 01-05 02:21:50.589][0] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 [    9.293823 / 01-05 02:21:50.589][0] pci 0000:01:00.0: [14e4:43e9] type 00 class 0x028000
 [    9.293990 / 01-05 02:21:50.589][0] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
 [    9.294000 / 01-05 02:21:50.589][0] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
 [    9.294089 / 01-05 02:21:50.589][0] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x001c[4] is all FFs
 [    9.294099 / 01-05 02:21:50.589][0] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
 [    9.294230 / 01-05 02:21:50.589][0] pci 0000:01:00.0: IOMMU is currently not supported for PCI
 [    9.294448 / 01-05 02:21:50.589][0] pci 0000:01:00.0: supports D1 D2
 [    9.294455 / 01-05 02:21:50.589][0] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 [    9.294744 / 01-05 02:21:50.589][0] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 [    9.294912 / 01-05 02:21:50.589][0] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
 [    9.294931 / 01-05 02:21:50.589][0] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c9fffff]
 [    9.294942 / 01-05 02:21:50.589][0] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
 [    9.294966 / 01-05 02:21:50.589][0] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit]
 [    9.295142 / 01-05 02:21:50.589][0] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c800000-0x0c807fff 64bit]
 [    9.295240 / 01-05 02:21:50.589][0] pci 0000:00:00.0: PCI bridge to [bus 01]
 [    9.295272 / 01-05 02:21:50.589][0] pci 0000:00:00.0:   bridge window [mem 0x0c400000-0x0c9fffff]
 [    9.378315 / 01-05 02:21:50.669][3] bcm_wifi_set_power: wifi power successed to pull up
 [    9.378322 / 01-05 02:21:50.669][3] wifi_platform_bus_enumerate device present 1
 [    9.378328 / 01-05 02:21:50.669][3] msm_pcie_enumerate: PCIe: RC0 has already been enumerated.
 [    9.378333 / 01-05 02:21:50.669][3] [BRCM] Card detect done
 [    9.378370 / 01-05 02:21:50.669][3] PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 43E9(good PCI location)
 [    9.378377 / 01-05 02:21:50.669][3] dhdpcie_init: found adapter info 'DHD generic adapter'
 [    9.378389 / 01-05 02:21:50.669][3] alloc static buf at ffffffc033e40000!
 [    9.378813 / 01-05 02:21:50.669][3] pcieh 0000:01:00.0: enabling device (0000 -> 0002)
 [    9.380297 / 01-05 02:21:50.679][3] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
 [    9.380305 / 01-05 02:21:50.679][3] request DHD_INFO size(25216) is bigger than static size(24576).
 [    9.380311 / 01-05 02:21:50.679][3] wifi_platform_prealloc: failed to alloc static mem section 7
 [    9.380321 / 01-05 02:21:50.679][3] wifi_platform_get_mac_addr
 [    9.380329 / 01-05 02:21:50.679][3] [bcm_wifi_get_mac_addr] Exiting. MyMac :  0 : 90 : 4c : d6 : 84 :a
 [    9.380404 / 01-05 02:21:50.679][3] CFG80211-INFO2) wl_setup_wiphy : Registering Vendor80211
 [    9.380684 / 01-05 02:21:50.679][0] wl_create_event_handler(): thread:wl_event_handler:1ac started
 [    9.380694 / 01-05 02:21:50.679][3] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xffffffc033b98cf0
 [    9.380907 / 01-05 02:21:50.679][0] dhd_attach(): thread:dhd_watchdog_thread:1ad started
 [    9.380920 / 01-05 02:21:50.679][0] dhd_deferred_work_init: work queue initialized 
 [    9.380928 / 01-05 02:21:50.679][0] DHD LOAD BALANCING Enabled
 [    9.381406 / 01-05 02:21:50.679][0] Dongle Host Driver, version 1.78.5 (r)
 [    9.381406 / 01-05 02:21:50.679][0] Compiled in drivers/net/wireless/bcmdhd on 3.18.31-perf-g1b39075
 [    9.381757 / 01-05 02:21:50.679][0] Register interface [wlan0]  MAC: 00:90:4c:3c:28:51
 [    9.381757 / 01-05 02:21:50.679][0] 
 [    9.381784 / 01-05 02:21:50.679][3] CFG80211-INFO2) wl_event_handler : was terminated
 [    9.381810 / 01-05 02:21:50.679][0] wl_destroy_event_handler(): thread:wl_event_handler:1ac terminated OK
 [    9.381821 / 01-05 02:21:50.679][0] dhd_wl_ioctl: returning as busstate=0
 [    9.381829 / 01-05 02:21:50.679][0] dhd_bus_devreset: == Power OFF ==
 [    9.381844 / 01-05 02:21:50.679][0] dhdpcie_oob_intr_unregister: irq is not registered
 [    9.392344 / 01-05 02:21:50.689][3] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
 [    9.393420 / 01-05 02:21:50.689][3] dhd_bus_devreset:  WLAN OFF Done
 [    9.393427 / 01-05 02:21:50.689][3] wifi_platform_set_power = 0
 [    9.393462 / 01-05 02:21:50.689][3] [BRCM]: gpio_direction_output(1011,0)! ret = 0
 [    9.393468 / 01-05 02:21:50.689][3] bcm_wifi_set_power: wifi power successed to pull down
 [    9.393530 / 01-05 02:21:50.689][3] drv probe : 9228 bcmdhd_wlan 165
 [    9.393619 / 01-05 02:21:50.689][3] dhd_module_init out
 [    9.396776 / 01-05 02:21:50.689][3] clock_late_init: Removing enables held for handed-off clocks
 [    9.401173 / 01-05 02:21:50.699][3] ALSA device list:
 [    9.401181 / 01-05 02:21:50.699][3]   No soundcards found.
 [    9.401608 / 01-05 02:21:50.699][3] Freeing unused kernel memory: 492K (ffffffc001395000 - ffffffc001410000)
 [    9.401624 / 01-05 02:21:50.699][3] Freeing alternatives memory: 80K (ffffffc001410000 - ffffffc001424000)
 [    9.401629 / 01-05 02:21:50.699][3] [CCAudit] Run init process for OS startup
 [    9.402501 / 01-05 02:21:50.699][3] init: init first stage started!
 [    9.404364 / 01-05 02:21:50.699][3] SELinux: 2048 avtab hash slots, 14188 rules.
 [    9.406958 / 01-05 02:21:50.699][3] SELinux: 2048 avtab hash slots, 14188 rules.
 [    9.406978 / 01-05 02:21:50.699][3] SELinux:  1 users, 2 roles, 1179 types, 0 bools, 1 sens, 1024 cats
 [    9.406985 / 01-05 02:21:50.699][3] SELinux:  63 classes, 14188 rules
 [    9.407862 / 01-05 02:21:50.699][3] SELinux:  Class can_socket not defined in policy.
 [    9.407876 / 01-05 02:21:50.699][3] SELinux: the above unknown classes and permissions will be denied
 [    9.407895 / 01-05 02:21:50.699][3] SELinux:  Completing initialization.
 [    9.407900 / 01-05 02:21:50.699][3] SELinux:  Setting up existing superblocks.
 [    9.407911 / 01-05 02:21:50.699][3] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
 [    9.407928 / 01-05 02:21:50.699][3] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
 [    9.407986 / 01-05 02:21:50.699][3] SELinux: initialized (dev bdev, type bdev), not configured for labeling
 [    9.407996 / 01-05 02:21:50.699][3] SELinux: initialized (dev proc, type proc), uses genfs_contexts
 [    9.408014 / 01-05 02:21:50.699][3] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
 [    9.435593 / 01-05 02:21:50.729][3] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
 [    9.435608 / 01-05 02:21:50.729][3] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
 [    9.435617 / 01-05 02:21:50.729][3] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
 [    9.435625 / 01-05 02:21:50.729][3] SELinux: initialized (dev aio, type aio), not configured for labeling
 [    9.435634 / 01-05 02:21:50.729][3] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
 [    9.435652 / 01-05 02:21:50.729][3] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
 [    9.435709 / 01-05 02:21:50.729][3] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
 [    9.435726 / 01-05 02:21:50.729][3] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
 [    9.472737 / 01-05 02:21:50.769][3] audit: type=1403 audit(1451960510.769:2): policy loaded auid=4294967295 ses=4294967295
 [    9.473246 / 01-05 02:21:50.769][3] init: (Initializing SELinux non-enforcing took 0.07s.)
 [    9.475747 / 01-05 02:21:50.769][3] init: init second stage started!
 [    9.480802 / 01-05 02:21:50.779][3] init: Running restorecon...
 [    9.643070 / 01-05 02:21:50.939][3] init: waitpid failed: No child processes
 [    9.643267 / 01-05 02:21:50.939][3] init: (Loading properties from /default.prop took 0.00s.)
 [    9.644435 / 01-05 02:21:50.939][3] init: (Parsing /init.environ.rc took 0.00s.)
 [    9.644644 / 01-05 02:21:50.939][3] init: (Parsing /init.usb.rc took 0.00s.)
 [    9.645514 / 01-05 02:21:50.939][3] init: /init.qcom.rc: 670: user requires 1 argument
 [    9.646134 / 01-05 02:21:50.939][3] init: (Parsing init.qcom.usb.rc took 0.00s.)
 [    9.646369 / 01-05 02:21:50.939][3] init: (Parsing init.qcom.power.rc took 0.00s.)
 [    9.646522 / 01-05 02:21:50.939][3] init: ignored duplicate definition of service 'perfd'init: ignored duplicate definition of service 'energy-awareness'init: (Parsing init.target.rc took 0.00s.)
 [    9.646623 / 01-05 02:21:50.939][3] init: (Parsing /init.qcom.rc took 0.00s.)
 [    9.646982 / 01-05 02:21:50.939][3] init: (Parsing /init.usb.configfs.rc took 0.00s.)
 [    9.647043 / 01-05 02:21:50.939][3] init: (Parsing /init.zygote64_32.rc took 0.00s.)
 [    9.647339 / 01-05 02:21:50.939][3] init: (Parsing /init.cm.rc took 0.00s.)
 [    9.647352 / 01-05 02:21:50.939][3] init: (Parsing /init.rc took 0.00s.)
 [    9.647682 / 01-05 02:21:50.939][3] init: Starting service 'ueventd'...
 [    9.648561 / 01-05 02:21:50.939][3] init: Waiting for /dev/.coldboot_done...
 [    9.649681 / 01-05 02:21:50.939][3] ueventd: ueventd started!
 [    9.692309 / 01-05 02:21:50.989][3] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
 [   10.067083 / 01-05 02:21:51.359][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
 [   10.067100 / 01-05 02:21:51.359][0] SMBCHG: battchg_suspend: votes unchanged; skipping
 [   10.067129 / 01-05 02:21:51.359][0] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
 [   10.067179 / 01-05 02:21:51.359][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
 [   10.067187 / 01-05 02:21:51.359][0] SMBCHG: usb_icl: votes unchanged; skipping
 [   10.067195 / 01-05 02:21:51.359][0] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
 [   10.067204 / 01-05 02:21:51.359][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [   10.068427 / 01-05 02:21:51.359][0] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
 [   10.240103 / 01-05 02:21:51.539][0] pet_watchdog [enable : 1, jiffies : 4294938320, delay_time : 1000]
 [   12.719083 / 01-05 02:21:54.009][2] ueventd: Coldboot took 3.07s.
 [   12.722023 / 01-05 02:21:54.019][0] init: Waiting for /dev/.coldboot_done took 3.07s.
 [   12.722775 / 01-05 02:21:54.019][0] keychord: using input dev qpnp_pon for fevent
 [   12.722790 / 01-05 02:21:54.019][0] keychord: using input dev gpio-keys for fevent
 [   12.723657 / 01-05 02:21:54.019][0] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
 [   12.724806 / 01-05 02:21:54.019][0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
 [   12.725004 / 01-05 02:21:54.019][0] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
 [   12.727270 / 01-05 02:21:54.019][0] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
 [   12.727315 / 01-05 02:21:54.019][0] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
 [   12.728286 / 01-05 02:21:54.019][0] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
 [   12.731088 / 01-05 02:21:54.029][3] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
 [   12.731322 / 01-05 02:21:54.029][3] Registered swp emulation handler
 [   12.732145 / 01-05 02:21:54.029][3] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
 [   12.733298 / 01-05 02:21:54.029][3] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
 [   12.733928 / 01-05 02:21:54.029][2] fs_mgr: Warning: unknown flag fileencryption
 [   12.741761 / 01-05 02:21:54.039][3] EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts: barrier=1
 [   12.741788 / 01-05 02:21:54.039][3] SELinux: initialized (dev sda18, type ext4), uses xattr
 [   12.741869 / 01-05 02:21:54.039][3] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
 [   12.744359 / 01-05 02:21:54.039][3] [CCAudit] do_sys_open error=-30 file=/etc/blkid.tab flag=131649 proc=init parent=init
 [   12.744410 / 01-05 02:21:54.039][3] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/cache,/cache,ext4)=-1: No such file or directory
 [   12.744776 / 01-05 02:21:54.039][3] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/cache
 [   12.753308 / 01-05 02:21:54.049][2] random: e2fsck urandom read with 117 bits of entropy available
 [   12.849553 / 01-05 02:21:54.139][0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
 [   12.849553 / 01-05 02:21:54.139][0] 
 [   12.849594 / 01-05 02:21:54.139][0] e2fsck: Pass 1: Checking inodes, blocks, and sizes
 [   12.849594 / 01-05 02:21:54.139][0] 
 [   12.849611 / 01-05 02:21:54.139][0] e2fsck: Pass 2: Checking directory structure
 [   12.849611 / 01-05 02:21:54.139][0] 
 [   12.849626 / 01-05 02:21:54.139][0] e2fsck: Pass 3: Checking directory connectivity
 [   12.849626 / 01-05 02:21:54.139][0] 
 [   12.849640 / 01-05 02:21:54.139][0] e2fsck: Pass 4: Checking reference counts
 [   12.849640 / 01-05 02:21:54.139][0] 
 [   12.849655 / 01-05 02:21:54.139][0] e2fsck: Pass 5: Checking group summary information
 [   12.849655 / 01-05 02:21:54.139][0] 
 [   12.849670 / 01-05 02:21:54.139][0] e2fsck: /dev/block/bootdevice/by-name/cache: 15/78880 files (0.0% non-contiguous), 10379/315392 blocks
 [   12.849670 / 01-05 02:21:54.139][0] 
 [   12.851447 / 01-05 02:21:54.149][0] EXT4-fs (sda19): mounted filesystem with ordered data mode. Opts: discard,barrier=1,noauto_da_alloc,errors=continue
 [   12.851478 / 01-05 02:21:54.149][0] SELinux: initialized (dev sda19, type ext4), uses xattr
 [   12.851549 / 01-05 02:21:54.149][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cache,target=/cache,type=ext4)=0
 [   12.853331 / 01-05 02:21:54.149][0] [CCAudit] do_sys_open error=-30 file=/etc/blkid.tab flag=131649 proc=init parent=init
 [   12.853694 / 01-05 02:21:54.149][0] EXT4-fs (sda20): Ignoring removed nomblk_io_submit option
 [   12.870652 / 01-05 02:21:54.169][1] EXT4-fs (sda20): 56 orphan inodes deleted
 [   12.870670 / 01-05 02:21:54.169][1] EXT4-fs (sda20): recovery complete
 [   12.922250 / 01-05 02:21:54.219][1] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
 [   12.922288 / 01-05 02:21:54.219][1] SELinux: initialized (dev sda20, type ext4), uses xattr
 [   12.922364 / 01-05 02:21:54.219][1] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
 [   12.923983 / 01-05 02:21:54.219][1] fs_mgr: check_fs(): unmount(/data) succeeded
 [   12.924027 / 01-05 02:21:54.219][1] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
 [   13.086555 / 01-05 02:21:54.379][0] random: nonblocking pool is initialized
 [   13.510825 / 01-05 02:21:54.809][1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
 [   13.510825 / 01-05 02:21:54.809][1] 
 [   13.510863 / 01-05 02:21:54.809][1] e2fsck: Pass 1: Checking inodes, blocks, and sizes
 [   13.510863 / 01-05 02:21:54.809][1] 
 [   13.510879 / 01-05 02:21:54.809][1] e2fsck: Pass 2: Checking directory structure
 [   13.510879 / 01-05 02:21:54.809][1] 
 [   13.510893 / 01-05 02:21:54.809][1] e2fsck: Pass 3: Checking directory connectivity
 [   13.510893 / 01-05 02:21:54.809][1] 
 [   13.510907 / 01-05 02:21:54.809][1] e2fsck: Pass 4: Checking reference counts
 [   13.510907 / 01-05 02:21:54.809][1] 
 [   13.510920 / 01-05 02:21:54.809][1] e2fsck: Pass 5: Checking group summary information
 [   13.510920 / 01-05 02:21:54.809][1] 
 [   13.510933 / 01-05 02:21:54.809][1] e2fsck: /dev/block/bootdevice/by-name/userdata: 10120/3424256 files (7.0% non-contiguous), 8445097/13694976 blocks
 [   13.510933 / 01-05 02:21:54.809][1] 
 [   13.513618 / 01-05 02:21:54.809][1] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts: discard,barrier=1,noauto_da_alloc,errors=continue
 [   13.513651 / 01-05 02:21:54.809][1] SELinux: initialized (dev sda20, type ext4), uses xattr
 [   13.513717 / 01-05 02:21:54.809][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
 [   13.515168 / 01-05 02:21:54.809][1] EXT4-fs (sda16): warning: maximal mount count reached, running e2fsck is recommended
 [   13.515380 / 01-05 02:21:54.809][1] EXT4-fs (sda16): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
 [   13.515403 / 01-05 02:21:54.809][1] SELinux: initialized (dev sda16, type ext4), uses xattr
 [   13.515453 / 01-05 02:21:54.809][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/persist,target=/persist,type=ext4)=0
 [   13.516662 / 01-05 02:21:54.809][1] SELinux: initialized (dev sde18, type vfat), uses mountpoint labeling
 [   13.516704 / 01-05 02:21:54.809][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/modem,target=/firmware,type=vfat)=0
 [   13.518062 / 01-05 02:21:54.809][1] EXT4-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
 [   13.518282 / 01-05 02:21:54.809][1] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
 [   13.518304 / 01-05 02:21:54.809][1] SELinux: initialized (dev sda4, type ext4), uses xattr
 [   13.518354 / 01-05 02:21:54.809][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/sns,target=/sns,type=ext4)=0
 [   13.519763 / 01-05 02:21:54.809][1] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
 [   13.519975 / 01-05 02:21:54.809][1] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
 [   13.519996 / 01-05 02:21:54.809][1] SELinux: initialized (dev sda3, type ext4), uses xattr
 [   13.520120 / 01-05 02:21:54.819][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/drm,target=/persist-lg,type=ext4)=0
 [   13.521482 / 01-05 02:21:54.819][0] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
 [   13.521699 / 01-05 02:21:54.819][0] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
 [   13.521721 / 01-05 02:21:54.819][0] SELinux: initialized (dev sda2, type ext4), uses xattr
 [   13.521746 / 01-05 02:21:54.819][0] SELinux:  Context u:object_r:mpt_file:s0 is not valid (left unmapped).
 [   13.521787 / 01-05 02:21:54.819][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/mpt,target=/mpt,type=ext4)=0
 [   13.523503 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
 [   13.523921 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
 [   13.524211 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
 [   13.524550 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
 [   13.524880 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
 [   13.525221 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
 [   13.525503 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)
 [   13.525809 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
 [   13.526159 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
 [   13.526503 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
 [   13.526809 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
 [   13.527120 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
 [   13.527434 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
 [   13.527758 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
 [   13.528220 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
 [   13.528575 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
 [   13.528877 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
 [   13.529203 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
 [   13.529487 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
 [   13.529768 / 01-05 02:21:54.819][0] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
 [   13.530392 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
 [   13.530791 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
 [   13.531092 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
 [   13.531394 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
 [   13.531675 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
 [   13.532032 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/rild.rc took 0.00s.)
 [   13.532347 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
 [   13.532684 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/superuser.rc took 0.00s.)
 [   13.533002 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
 [   13.533346 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
 [   13.533642 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
 [   13.533942 / 01-05 02:21:54.829][0] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
 [   13.534613 / 01-05 02:21:54.829][0] fs_mgr: Warning: unknown flag fileencryption
 [   13.536800 / 01-05 02:21:54.829][0] audit: type=1400 audit(1451960514.829:3): avc:  denied  { write } for  pid=1 comm="init" name="tracing_on" dev="debugfs" ino=6725 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
 [   13.537782 / 01-05 02:21:54.829][0] init: Starting service 'logd'...
 [   13.573738 / 01-05 02:21:54.869][0] logd.auditd: start
 [   13.573787 / 01-05 02:21:54.869][0] logd.klogd: 13573755463
 [   13.783396 / 01-05 02:21:55.079][2] [QFUSE]sec_read_store start
 [   13.783412 / 01-05 02:21:55.079][2] [QFUSE]qfprom_secdat_read start
 [   13.783825 / 01-05 02:21:55.079][2] [QFUSE]qfprom_secdat_read end
 [   13.783835 / 01-05 02:21:55.079][2] [QFUSE]sec_read_store end
 [   13.784347 / 01-05 02:21:55.079][2] init: property_set("ro.qc.sdk.audio.fluencetype", "fluence") failed
 [   13.784917 / 01-05 02:21:55.079][2] init: (Loading properties from /system/build.prop took 0.00s.)
 [   13.784959 / 01-05 02:21:55.079][2] init: (Loading properties from /vendor/build.prop took 0.00s.)
 [   13.784982 / 01-05 02:21:55.079][2] init: (Loading properties from /factory/factory.prop took 0.00s.)
 [   13.785084 / 01-05 02:21:55.079][2] fs_mgr: Warning: unknown flag fileencryption
 [   13.785955 / 01-05 02:21:55.079][2] init: Starting service 'debuggerd'...
 [   13.786432 / 01-05 02:21:55.079][2] init: Starting service 'debuggerd64'...
 [   13.787237 / 01-05 02:21:55.079][2] init: Starting service 'vold'...
 [   13.880855 / 01-05 02:21:55.179][2] init: Not bootcharting.
 [   13.912686 / 01-05 02:21:55.209][1] fs_mgr: Warning: unknown flag fileencryption
 [   14.062936 / 01-05 02:21:55.359][1] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
 [   14.120051 / 01-05 02:21:55.419][3] anx7688-usbc 6-0028: anx7688_ctype_work: Unknown Charger, 0mV, 0mA
 [   14.121437 / 01-05 02:21:55.419][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
 [   14.121444 / 01-05 02:21:55.419][3] SMBCHG: battchg_suspend: votes unchanged; skipping
 [   14.121476 / 01-05 02:21:55.419][3] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
 [   14.121521 / 01-05 02:21:55.419][3] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
 [   14.121528 / 01-05 02:21:55.419][3] SMBCHG: usb_icl: votes unchanged; skipping
 [   14.121534 / 01-05 02:21:55.419][3] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
 [   14.121541 / 01-05 02:21:55.419][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [   14.121619 / 01-05 02:21:55.419][3] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
 [   14.166892 / 01-05 02:21:55.459][2] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 473) exited with status 0
 [   14.169038 / 01-05 02:21:55.459][2] [CCAudit] chmod_common error=-30 file=camera flag=0 proc=init parent=swapper/0
 [   14.183171 / 01-05 02:21:55.479][2] init: decode_uid: Unable to find UID for 'lgdrm'. Returning UINT_MAX
 [   14.183193 / 01-05 02:21:55.479][2] init: decode_uid: Unable to find UID for 'lgdrm_acc'. Returning UINT_MAX
 [   14.183657 / 01-05 02:21:55.479][2] init: decode_uid: Unable to find UID for 'divxdrm'. Returning UINT_MAX
 [   14.183964 / 01-05 02:21:55.479][2] init: decode_uid: Unable to find UID for 'divxdrm'. Returning UINT_MAX
 [   14.184081 / 01-05 02:21:55.479][2] init: decode_uid: Unable to find UID for 'divxdrm'. Returning UINT_MAX
 [   14.184191 / 01-05 02:21:55.479][2] init: decode_uid: Unable to find UID for 'divxdrm'. Returning UINT_MAX
 [   14.184496 / 01-05 02:21:55.479][2] init: decode_uid: Unable to find UID for 'divxdrm'. Returning UINT_MAX
 [   14.184610 / 01-05 02:21:55.479][2] init: decode_uid: Unable to find UID for 'lgmms'. Returning UINT_MAX
 [   14.185184 / 01-05 02:21:55.479][2] init: cannot find '/system/bin/cpfirmware' (No such file or directory), disabling 'exec 2 (/system/bin/cpfirmware)'
 [   14.188668 / 01-05 02:21:55.479][2] init: Starting service 'sysinit'...
 [   14.189387 / 01-05 02:21:55.479][2] init: (Loading properties from /data/local.prop took 0.00s.)
 [   14.403258 / 01-05 02:21:55.699][0] init: Service 'sysinit' (pid 475) exited with status 0
 [   14.403493 / 01-05 02:21:55.699][0] init: Starting service 'logd-reinit'...
 [   14.404082 / 01-05 02:21:55.699][0] init: write_file: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
 [   14.404325 / 01-05 02:21:55.699][0] [CCAudit] do_sys_open error=-13 file=/sys/class/i2c-dev/i2c-6/device/6-0072/enable_irq flag=688193 proc=init parent=swapper/0
 [   14.404347 / 01-05 02:21:55.699][0] init: write_file: Unable to open '/sys/class/i2c-dev/i2c-6/device/6-0072/enable_irq': Permission denied
 [   14.404379 / 01-05 02:21:55.699][0] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
 [   14.404393 / 01-05 02:21:55.699][0] init: write: cannot expand '${persist.sys.ssr.enable_debug}'
 [   14.404415 / 01-05 02:21:55.699][0] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
 [   14.404423 / 01-05 02:21:55.699][3] type=1400 audit(1451960515.699:4): avc: denied { write } for pid=1 comm="init" name="6-0072" dev="sysfs" ino=22416 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
 [   14.404455 / 01-05 02:21:55.699][0] init: write: cannot expand '${persist.sys.mba_boot_timeout}'
 [   14.404699 / 01-05 02:21:55.699][1] [Touch E] [sw49407_upgrade 2110] fail to request_firmware fwpath: touch/elsa/L1L57P1_1_07.img (ret:-11)
 [   14.404715 / 01-05 02:21:55.699][1] [Touch] There is no need to reset (ret: -11)
 [   14.404740 / 01-05 02:21:55.699][1] [Touch] NOTIFY_CONNECTION!
 [   14.404748 / 01-05 02:21:55.699][1] [Touch] TA Type: 1
 [   14.404757 / 01-05 02:21:55.699][1] [Touch] sw49407_connect: write charger_state = 0x01
 [   14.404976 / 01-05 02:21:55.699][0] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
 [   14.404994 / 01-05 02:21:55.699][0] init: write: cannot expand '${persist.sys.modem_auth_timeout}'
 [   14.405019 / 01-05 02:21:55.699][0] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
 [   14.405032 / 01-05 02:21:55.699][0] init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
 [   14.405531 / 01-05 02:21:55.699][1] [Touch] touch_ic_init Start
 [   14.405546 / 01-05 02:21:55.699][1] [Touch] sw49407_init: charger_state = 0x01
 [   14.405700 / 01-05 02:21:55.699][0] [Touch] info ptr addr read : 0026425C
 [   14.405843 / 01-05 02:21:55.699][0] [Touch] tc status read : 0F5200E7
 [   14.405854 / 01-05 02:21:55.699][0] [Touch] ========== Info ADDR ==========
 [   14.405863 / 01-05 02:21:55.699][0] [Touch] chip_info_addr        : 025C
 [   14.405871 / 01-05 02:21:55.699][0] [Touch] reg_info_addr         : 0264
 [   14.405880 / 01-05 02:21:55.699][0] [Touch] ========== Info ADDR ==========
 [   14.405887 / 01-05 02:21:55.699][0] [Touch] Model ID is loaded
 [   14.405894 / 01-05 02:21:55.699][0] [Touch] Production Test info checksum is ok
 [   14.406608 / 01-05 02:21:55.699][0] subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008ea00000 to 0x0000000090600000
 [   14.408080 / 01-05 02:21:55.699][0] [Touch] ==Print PT info Data==
 [   14.408099 / 01-05 02:21:55.699][0] [Touch] version : v1.07, chip : 9, protocol : 4
 [   14.408099 / 01-05 02:21:55.699][0] [Touch] 
 [   14.408099 / 01-05 02:21:55.699][0] [Touch] fpc : 2, lcm : 4, lot : 9
 [   14.408099 / 01-05 02:21:55.699][0] [Touch] product id : L1L57P1
 [   14.408099 / 01-05 02:21:55.699][0] [Touch] flash boot : idle, done, crc : ok
 [   14.408117 / 01-05 02:21:55.699][0] [Touch] ==Print Config Header Data==
 [   14.408124 / 01-05 02:21:55.699][0] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
 [   14.410536 / 01-05 02:21:55.709][0] [Touch] resume ts->lpwg.screen on
 [   14.410690 / 01-05 02:21:55.709][0] [Touch] sw49407_lpwg_control mode = 0
 [   14.410860 / 01-05 02:21:55.709][0] [Touch] swipe disable
 [   14.410868 / 01-05 02:21:55.709][0] [Touch] sw49407_tc_driving = 3, 185
 [   14.410998 / 01-05 02:21:55.709][0] [Touch] DDI Display Mode = 3
 [   14.411228 / 01-05 02:21:55.709][0] [Touch] Reset Cnt : 29
 [   14.411307 / 01-05 02:21:55.709][0] logd.daemon: reinit
 [   14.440384 / 01-05 02:21:55.739][1] [Touch] sw49407_te_info : 546, 16.66 ms, 60.00 hz
 [   14.440407 / 01-05 02:21:55.739][1] [Touch] Remove pending irq(389)
 [   14.440435 / 01-05 02:21:55.739][1] [Touch] touch_ic_init End
 [   14.509928 / 01-05 02:21:55.799][2] subsys-pil-tz 9300000.qcom,lpass: adsp: adsp.mdt starting auth and reset
 [   14.679927 / 01-05 02:21:55.969][2] subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset
 [   14.701545 / 01-05 02:21:55.999][2] subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received
 [   14.701575 / 01-05 02:21:55.999][0] subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up
 [   14.701589 / 01-05 02:21:55.999][2] L-Notify: Generel: 7
 [   14.701784 / 01-05 02:21:55.999][2] init: Service 'logd-reinit' (pid 486) exited with status 0
 [   14.701893 / 01-05 02:21:55.999][2] sysmon_send_event_no_qmi: Message sending failed -19
 [   14.705290 / 01-05 02:21:55.999][2] subsys-pil-tz 1c00000.qcom,ssc: slpi: loading from 0x0000000090600000 to 0x0000000091000000
 [   14.712109 / 01-05 02:21:56.009][0] apr_tal:Q6 Is Up
 [   14.764410 / 01-05 02:21:56.059][3] subsys-pil-tz 1c00000.qcom,ssc: slpi: slpi.mdt starting auth and reset
 [   14.804244 / 01-05 02:21:56.099][2] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
 [   14.804931 / 01-05 02:21:56.099][2] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000
 [   14.811356 / 01-05 02:21:56.109][1] sps:BAM 0x0000000009184000 (va:0xffffff8004780000) enabled: ver:0x19, number of pipes:31
 [   14.811370 / 01-05 02:21:56.109][0] sps:BAM 0x0000000009184000 is registered.
 [   14.812739 / 01-05 02:21:56.109][0] slimbus sb-1: of_slim: invalid E-addr
 [   14.812977 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: Platform data from device tree
 [   14.813066 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
 [   14.813092 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
 [   14.813116 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
 [   14.813140 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
 [   14.813162 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
 [   14.813173 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-ldoh-v property in node /soc/slim@91c0000/tasha_codec failed
 [   14.813183 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt1-mv property in node /soc/slim@91c0000/tasha_codec failed
 [   14.813194 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt2-mv property in node /soc/slim@91c0000/tasha_codec failed
 [   14.813204 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt3-mv property in node /soc/slim@91c0000/tasha_codec failed
 [   14.813215 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias1-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
 [   14.813225 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias2-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
 [   14.813235 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias3-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
 [   14.813244 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
 [   14.813297 / 01-05 02:21:56.109][0] wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_probe: codec type is 2
 [   14.832567 / 01-05 02:21:56.129][3] subsys-pil-tz 1c00000.qcom,ssc: slpi: Brought out of reset
 [   14.870216 / 01-05 02:21:56.169][1] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
 [   14.870254 / 01-05 02:21:56.169][1] wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
 [   14.870649 / 01-05 02:21:56.169][0] slimbus:1 laddr:0xca, EAPC:0x0:0xa0
 [   14.870924 / 01-05 02:21:56.169][0] wcd9335-slim tasha-slim-pgd: wcd9335_bring_up: wcd9335 codec version is v2.0
 [   14.871590 / 01-05 02:21:56.169][0] wcd9335-slim tasha-slim-pgd: wcd9xxx_check_codec_type: detected tasha_codec, major 0x107, minor 0x1, ver 0x2
 [   14.871607 / 01-05 02:21:56.169][0] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
 [   14.882829 / 01-05 02:21:56.179][1] tasha_codec tasha_codec: tasha_swrm_clock: swrm clock users 1
 [   14.886511 / 01-05 02:21:56.179][2] subsys-pil-tz 1c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
 [   14.886541 / 01-05 02:21:56.179][0] subsys-pil-tz 1c00000.qcom,ssc: Subsystem error monitoring/handling services are up
 [   14.887145 / 01-05 02:21:56.179][3] sysmon_send_event_no_qmi: Message sending failed -19
 [   14.887164 / 01-05 02:21:56.179][3] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded
 [   14.888417 / 01-05 02:21:56.179][2] tasha_codec tasha_codec: tasha_probe: Tasha driver probe done
 [   14.888513 / 01-05 02:21:56.179][2] drv probe : 14812 wcd9335-slim 75
 [   14.888741 / 01-05 02:21:56.179][3] init: Starting service 'healthd'...
 [   14.889302 / 01-05 02:21:56.179][3] init: Starting service 'conn_init'...
 [   14.889717 / 01-05 02:21:56.179][3] init: Starting service 'qcom-c_core-sh'...
 [   14.890257 / 01-05 02:21:56.189][3] init: Starting service 'irsc_util'...
 [   14.890776 / 01-05 02:21:56.189][3] init: Starting service 'rmt_storage'...
 [   14.891126 / 01-05 02:21:56.189][3] init: cannot find '/system/bin/rfs_access' (No such file or directory), disabling 'rfs_access'
 [   14.891273 / 01-05 02:21:56.189][3] init: Starting service 'sensor-sh'...
 [   14.891583 / 01-05 02:21:56.189][3] init: Starting service 'lge-usb-sh'...
 [   14.892012 / 01-05 02:21:56.189][0] msm8996-asoc-snd soc:sound-9335: msm8996_init_wsa_dev: found 1 wsa881x devices registered with ALSA core
 [   14.892082 / 01-05 02:21:56.189][3] init: Starting service 'per_mgr'...
 [   14.892129 / 01-05 02:21:56.189][1] init: cannot setexeccon('u:r:lge-usb-sh:s0'): Invalid argument
 [   14.892641 / 01-05 02:21:56.189][3] init: Starting service 'qseecomd'...
 [   14.893185 / 01-05 02:21:56.189][3] init: Starting service 'lmkd'...
 [   14.893703 / 01-05 02:21:56.189][3] init: Starting service 'servicemanager'...
 [   14.894194 / 01-05 02:21:56.189][0] tasha_codec tasha_codec: tasha_codec_probe()
 [   14.894234 / 01-05 02:21:56.189][3] init: Starting service 'surfaceflinger'...
 [   14.894700 / 01-05 02:21:56.189][3] init: Service 'lge-usb-sh' (pid 524) exited with status 127
 [   14.895996 / 01-05 02:21:56.189][3] [CCAudit] chmod_common error=-30 file=ip flag=0 proc=init parent=swapper/0
 [   14.896202 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
 [   14.896227 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
 [   14.896250 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
 [   14.896273 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
 [   14.896295 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
 [   14.896317 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
 [   14.896341 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
 [   14.896362 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
 [   14.896386 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
 [   14.896408 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
 [   14.896429 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
 [   14.896452 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
 [   14.896474 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
 [   14.896496 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
 [   14.896518 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
 [   14.896539 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
 [   14.896561 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
 [   14.896582 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
 [   14.896603 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
 [   14.896624 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
 [   14.899643 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/sys/devices/virtual/lg_rgb_led/use_patterns/setting': No such file or directory
 [   14.899903 / 01-05 02:21:56.189][3] init: cannot find '/system/bin/rfs_access' (No such file or directory), disabling 'rfs_access'
 [   14.899960 / 01-05 02:21:56.189][3] init: write_file: Unable to open '/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input0/update_fw': No such file or directory
 [   14.908964 / 01-05 02:21:56.199][1] wcd_mbhc_init: missing lge,msm-mbhc-extn-cable in dt node
 [   14.922324 / 01-05 02:21:56.219][1] tasha_codec tasha_codec: for cpe segments only will be dumped.
 [   14.929706 / 01-05 02:21:56.219][3] init: Service 'conn_init' (pid 519) exited with status 0
 [   14.929829 / 01-05 02:21:56.219][3] init: Service 'qcom-c_core-sh' (pid 520) exited with status 127
 [   14.929911 / 01-05 02:21:56.219][3] init: Service 'irsc_util' (pid 521) exited with status 0
 [   14.930965 / 01-05 02:21:56.229][3] init: SELinux: Could not get canonical path for /sys/block/mmcblk0/queue/scheduler restorecon: No such file or directory.
 [   14.931438 / 01-05 02:21:56.229][3] init: SELinux: Could not get canonical path for /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.
 [   14.932358 / 01-05 02:21:56.229][3] init: Starting service 'console'...
 [   14.933021 / 01-05 02:21:56.229][3] init: Starting service 'lge-usb-vzw-sh'...
 [   14.933445 / 01-05 02:21:56.229][3] android_usb android0: gadget enable(0)
 [   14.933459 / 01-05 02:21:56.229][3] enable_store: android_usb: already disabled
 [   14.933685 / 01-05 02:21:56.229][3] android_usb android0: LGE-USB request function list: mtp,adb:mtp,acm,diag,adb
 [   14.933723 / 01-05 02:21:56.229][3] android_usb android0: gadget enable(1)
 [   14.933731 / 01-05 02:21:56.229][3] ffs_function_enable: ffs_function_enable: config->opened(0)
 [   14.933737 / 01-05 02:21:56.229][3] android_disable: android_disable: checked disable_depth(1)
 [   14.933744 / 01-05 02:21:56.229][3] android_enable: android_enable: checked disable_depth(2)
 [   14.933776 / 01-05 02:21:56.229][3] init: Starting service 'adbd'...
 [   14.934297 / 01-05 02:21:56.229][3] init: Starting service 'per_proxy'...
 [   14.937181 / 01-05 02:21:56.229][3] type=1400 audit(1451960516.209:5): avc: denied { write } for pid=519 comm="hwaddrs" name="bdaddr" dev="sda20" ino=589826 scontext=u:r:hwaddrs:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
 [   14.937377 / 01-05 02:21:56.229][3] type=1400 audit(1451960516.209:6): avc: denied { open } for pid=519 comm="hwaddrs" path="/data/misc/bdaddr" dev="sda20" ino=589826 scontext=u:r:hwaddrs:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
 [   14.954328 / 01-05 02:21:56.249][3] init: Starting service 'su_daemon'...
 [   14.955010 / 01-05 02:21:56.249][3] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_verifier)'
 [   14.955264 / 01-05 02:21:56.249][3] init: Starting service 'cnd'...
 [   14.955806 / 01-05 02:21:56.249][3] init: Starting service 'imsqmidaemon'...
 [   14.956285 / 01-05 02:21:56.249][3] init: Starting service 'tftp_server'...
 [   14.956610 / 01-05 02:21:56.249][3] init: cannot find '/system/bin/port-bridge' (No such file or directory), disabling 'port-bridge'
 [   14.956645 / 01-05 02:21:56.249][3] init: cannot find '/system/bin/qmuxd' (No such file or directory), disabling 'qmuxd'
 [   14.956842 / 01-05 02:21:56.249][3] init: Starting service 'netmgrd'...
 [   14.957318 / 01-05 02:21:56.249][3] init: Starting service 'ipacm-diag'...
 [   14.957866 / 01-05 02:21:56.249][3] init: Starting service 'ipacm'...
 [   14.958378 / 01-05 02:21:56.249][3] init: Starting service 'qti'...
 [   14.958889 / 01-05 02:21:56.249][3] init: Starting service 'energy-awareness'...
 [   14.959414 / 01-05 02:21:56.249][3] init: Starting service 'thermal-engine'...
 [   14.959974 / 01-05 02:21:56.249][3] init: Starting service 'adsprpcd'...
 [   14.966848 / 01-05 02:21:56.259][3] read descriptors
 [   14.966871 / 01-05 02:21:56.259][3] read strings
 [   14.966891 / 01-05 02:21:56.259][3] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(ffffffc033aa7c00)
 [   14.966900 / 01-05 02:21:56.259][3] android_enable: android_enable: checked disable_depth(1)
 [   14.966908 / 01-05 02:21:56.259][3] mtp_bind_config
 [   14.967002 / 01-05 02:21:56.259][3] mtp_bind_config
 [   14.968167 / 01-05 02:21:56.259][3] dwc3_gadget_run_stop Queue DCP check work! 0
 [   14.968726 / 01-05 02:21:56.259][1] capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
 [   14.969954 / 01-05 02:21:56.259][0] msm8996-asoc-snd soc:sound-9335: control 2:0:0:CPE AFE MAD Enable:0 is already present
 [   14.976787 / 01-05 02:21:56.269][1] alloc_contig_range: [fe408, fe40f) PFNs busy
 [   14.978990 / 01-05 02:21:56.269][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SLIMBUS_1_TX --> SLIM_1_TX --> MultiMedia3 Mixer
 [   14.979012 / 01-05 02:21:56.269][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SLIMBUS_1_TX -> SLIM_1_TX -> MultiMedia3 Mixer
 [   14.979070 / 01-05 02:21:56.269][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SLIMBUS_3_TX --> SLIM_3_TX --> MultiMedia3 Mixer
 [   14.979083 / 01-05 02:21:56.269][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SLIMBUS_3_TX -> SLIM_3_TX -> MultiMedia3 Mixer
 [   14.979134 / 01-05 02:21:56.269][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SLIMBUS_4_TX --> SLIM_4_TX --> MultiMedia3 Mixer
 [   14.979143 / 01-05 02:21:56.269][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SLIMBUS_4_TX -> SLIM_4_TX -> MultiMedia3 Mixer
 [   14.979185 / 01-05 02:21:56.269][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SLIMBUS_6_TX --> SLIM_6_TX --> MultiMedia3 Mixer
 [   14.979194 / 01-05 02:21:56.269][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SLIMBUS_6_TX -> SLIM_6_TX -> MultiMedia3 Mixer
 [   14.980346 / 01-05 02:21:56.279][1] alloc_contig_range: [fe418, fe41f) PFNs busy
 [   14.981572 / 01-05 02:21:56.279][1] alloc_contig_range: [fe408, fe40d) PFNs busy
 [   14.985619 / 01-05 02:21:56.279][1] alloc_contig_range: [fe418, fe41d) PFNs busy
 [   14.991158 / 01-05 02:21:56.289][3] init: Starting service 'zygote'...
 [   14.991699 / 01-05 02:21:56.289][3] init: Starting service 'zygote_secondary'...
 [   14.991850 / 01-05 02:21:56.289][2] healthd: BatteryFullChargePath not found
 [   14.991864 / 01-05 02:21:56.289][2] healthd: BatteryCycleCountPath not found
 [   15.004260 / 01-05 02:21:56.299][3] init: Starting service 'audioserver'...
 [   15.004925 / 01-05 02:21:56.299][3] init: Starting service 'cameraserver'...
 [   15.005487 / 01-05 02:21:56.299][3] init: Starting service 'drm'...
 [   15.006073 / 01-05 02:21:56.299][3] init: Starting service 'installd'...
 [   15.006639 / 01-05 02:21:56.299][3] init: Starting service 'keystore'...
 [   15.007243 / 01-05 02:21:56.299][3] init: Starting service 'mediacodec'...
 [   15.007773 / 01-05 02:21:56.299][3] init: Starting service 'mediadrm'...
 [   15.008358 / 01-05 02:21:56.299][3] init: Starting service 'mediaextractor'...
 [   15.008927 / 01-05 02:21:56.299][3] init: Starting service 'media'...
 [   15.009057 / 01-05 02:21:56.299][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL3 MUX
 [   15.009079 / 01-05 02:21:56.299][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL3 MUX -> direct -> MM_UL3
 [   15.009561 / 01-05 02:21:56.299][3] init: Starting service 'netd'...
 [   15.010599 / 01-05 02:21:56.309][0] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
 [   15.011011 / 01-05 02:21:56.309][2] diag: In diag_send_feature_mask_update, control channel is not open, p: 3, 0000000000000000
 [   15.050642 / 01-05 02:21:56.349][3] init: couldn't write 570 to /dev/cpuset/camera-daemon/tasks: No such file or directory
 [   15.060494 / 01-05 02:21:56.359][0] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
 [   15.061720 / 01-05 02:21:56.359][3] init: Starting service 'ril-daemon'...
 [   15.063235 / 01-05 02:21:56.359][0] IPA received MPSS BEFORE_POWERUP
 [   15.063531 / 01-05 02:21:56.359][0] ipa ipa2_uc_state_check:301 uC is not loaded
 [   15.063573 / 01-05 02:21:56.359][0] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
 [   15.064183 / 01-05 02:21:56.359][3] init: Starting service 'dpmd'...
 [   15.064936 / 01-05 02:21:56.359][0] IPA BEFORE_POWERUP handling is complete
 [   15.064988 / 01-05 02:21:56.359][3] modem is powering up 
 [   15.066717 / 01-05 02:21:56.359][3] init: Starting service 'qcom-sh'...
 [   15.076504 / 01-05 02:21:56.369][0] pil-q6v5-mss 2080000.qcom,mss: modem: loading from 0x0000000088000000 to 0x000000008e900000
 [   15.082338 / 01-05 02:21:56.379][0] pil-q6v5-mss 2080000.qcom,mss: pil : mss reset and load mba
 [   15.082983 / 01-05 02:21:56.379][3] init: Starting service 'loc_launcher'...
 [   15.083562 / 01-05 02:21:56.379][3] init: Starting service 'qseeproxydaemon'...
 [   15.097296 / 01-05 02:21:56.389][3] init: Starting service 'fpc_early_loader'...
 [   15.097955 / 01-05 02:21:56.389][3] init: Starting service 'qcamerasvr'...
 [   15.098926 / 01-05 02:21:56.389][3] 'opened /dev/adsprpc-smd c 218 0'
 [   15.099958 / 01-05 02:21:56.389][3] init: Starting service 'fingerprintd'...
 [   15.100422 / 01-05 02:21:56.399][3] init: cannot find '/system/bin/qfp-daemon' (No such file or directory), disabling 'qfp-daemon'
 [   15.100451 / 01-05 02:21:56.399][3] init: cannot find '/system/bin/qvop-daemon' (No such file or directory), disabling 'qvop-daemon'
 [   15.100712 / 01-05 02:21:56.399][3] init: Starting service 'time_daemon'...
 [   15.148217 / 01-05 02:21:56.439][3] init: Starting service 'audiod'...
 [   15.148681 / 01-05 02:21:56.439][3] init: cannot find '/system/bin/tloc_daemon' (No such file or directory), disabling 'tlocd'
 [   15.148710 / 01-05 02:21:56.439][3] init: cannot find '/system/vendor/bin/mdtp_service' (No such file or directory), disabling 'mdtp_service'
 [   15.148925 / 01-05 02:21:56.439][3] init: Starting service 'gatekeeperd'...
 [   15.149515 / 01-05 02:21:56.439][3] init: Starting service 'perfprofd'...
 [   15.166079 / 01-05 02:21:56.459][0] pil-q6v5-mss 2080000.qcom,mss: Debug policy not present - msadp. Continue.
 [   15.171276 / 01-05 02:21:56.469][0] pil-q6v5-mss 2080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000f6f00000 to 0x00000000f7000000 size 100000
 [   15.173024 / 01-05 02:21:56.469][3] init: Service 'lge-usb-vzw-sh' (pid 533) exited with status 127
 [   15.173959 / 01-05 02:21:56.469][1] alloc_contig_range: [fe418, fe41d) PFNs busy
 [   15.211529 / 01-05 02:21:56.509][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
 [   15.230898 / 01-05 02:21:56.529][1] kgsl: _read_fw2_block_header: GPMU unknown header ID 6
 [   15.234151 / 01-05 02:21:56.529][1] cpr3_regulator_measure_aging: gfx: average quotient delta=17 (count=10)
 [   15.234205 / 01-05 02:21:56.529][1] cpr3_regulator_aging_adjust: gfx: aging measurement successful; aging reference adjustment voltage=1016 uV
 [   15.267230 / 01-05 02:21:56.559][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
 [   15.270890 / 01-05 02:21:56.569][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
 [   15.272818 / 01-05 02:21:56.569][1] pil-q6v5-mss 2080000.qcom,mss: MBA boot done
 [   15.272863 / 01-05 02:21:56.569][1] pil-q6v5-mss 2080000.qcom,mss: pil : msa auth modem.mdt.
 [   15.283503 / 01-05 02:21:56.579][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
 [   15.301853 / 01-05 02:21:56.599][3] msm_thermal:interrupt_mode_init interrupt mode init !
 [   15.301912 / 01-05 02:21:56.599][3] msm_thermal:disable_msm_thermal Max frequency reset for CPU0
 [   15.301918 / 01-05 02:21:56.599][3] msm_thermal:disable_msm_thermal Max frequency reset for CPU1
 [   15.301924 / 01-05 02:21:56.599][3] msm_thermal:disable_msm_thermal Max frequency reset for CPU2
 [   15.301929 / 01-05 02:21:56.599][3] msm_thermal:disable_msm_thermal Max frequency reset for CPU3
 [   15.301964 / 01-05 02:21:56.599][3] msm_thermal:update_cpu_freq [CPU0] : max freq = 4294967295
 [   15.301983 / 01-05 02:21:56.599][3] msm_thermal:update_cpu_freq [CPU2] : max freq = 4294967295
 [   15.326414 / 01-05 02:21:56.619][1] subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap: loading from 0x0000000091000000 to 0x0000000091002000
 [   15.359468 / 01-05 02:21:56.649][0] WIN/LINUX ACM bInterfaceClass change to fs:2
 [   15.359689 / 01-05 02:21:56.649][0] WIN/LINUX ACM bInterfaceClass change to fs:2
 [   15.359950 / 01-05 02:21:56.649][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
 [   15.360971 / 01-05 02:21:56.659][0] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
 [   15.361113 / 01-05 02:21:56.659][0] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
 [   15.361255 / 01-05 02:21:56.659][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
 [   15.364256 / 01-05 02:21:56.659][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
 [   15.364275 / 01-05 02:21:56.659][0] SMBCHG: battchg_suspend: votes unchanged; skipping
 [   15.364309 / 01-05 02:21:56.659][0] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
 [   15.364359 / 01-05 02:21:56.659][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
 [   15.364367 / 01-05 02:21:56.659][0] SMBCHG: usb_icl: 0 voting for 500 - on
 [   15.364373 / 01-05 02:21:56.659][0] SMBCHG: usb_icl: vote_min min_vote=500, client_index=0
 [   15.364379 / 01-05 02:21:56.659][0] SMBCHG: usb_icl: effective vote is now 500 voted by 0
 [   15.364386 / 01-05 02:21:56.659][0] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
 [   15.364393 / 01-05 02:21:56.659][0] vote: name[SMBCHG: usb_suspend], client_id[2], state[0], val[0]
 [   15.364400 / 01-05 02:21:56.659][0] SMBCHG: usb_suspend: 2 voting for 0 - off
 [   15.364571 / 01-05 02:21:56.659][2] SMBCHG: power_ok_handler: triggered: 0x01
 [   15.364600 / 01-05 02:21:56.659][0] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
 [   15.364626 / 01-05 02:21:56.659][0] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
 [   15.364642 / 01-05 02:21:56.659][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [   15.364682 / 01-05 02:21:56.659][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
 [   15.366110 / 01-05 02:21:56.659][1] subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap: a530_zap.mdt starting auth and reset
 [   15.371719 / 01-05 02:21:56.669][1] subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap: Brought out of reset
 [   15.379390 / 01-05 02:21:56.669][1] [CCAudit] do_sys_open error=-13 file=/proc/self/task/732/comm flag=655361 proc=surfaceflinger parent=init
 [   15.379667 / 01-05 02:21:56.669][1] [CCAudit] do_sys_open error=-13 file=/proc/self/task/734/comm flag=655361 proc=surfaceflinger parent=init
 [   15.381344 / 01-05 02:21:56.679][1] devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information.
 [   15.388001 / 01-05 02:21:56.679][3] msm_thermal:set_enabled enabled = 0
 [   15.403850 / 01-05 02:21:56.699][1] mdss_fb_blank_sub: [Display] mdss_fb_open+0x138/0x1cc mode:0
 [   15.420130 / 01-05 02:21:56.000][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
 [   15.435604 / 01-05 02:21:56.009][1] mdss_fb_blank_sub: mdss_fb_blank_sub: -
 [   15.435712 / 01-05 02:21:56.009][1] [CCAudit] do_sys_open error=-13 file=/sys/kernel/debug/tracing/trace_marker flag=655361 proc=surfaceflinger parent=init
 [   15.436516 / 01-05 02:21:56.009][1] hdmi_tx_sysfs_wta_hpd: 0
 [   15.436535 / 01-05 02:21:56.009][1] hdmi_tx_sysfs_wta_hpd: HPD is already off
 [   15.437120 / 01-05 02:21:56.009][1] hdmi_tx_sysfs_wta_hpd: 1
 [   15.437135 / 01-05 02:21:56.009][1] hdmi_tx_sysfs_wta_hpd: DS registered, HPD on not allowed
 [   15.468994 / 01-05 02:21:56.039][3] SMBCHG: fastchg_handler: p2f triggered
 [   15.469029 / 01-05 02:21:56.039][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [   15.502009 / 01-05 02:21:56.079][3] FG: update_sram_data: soc:[98], soc_raw[9232], voltage:[4175085], ocv:[4276250], current:[652767], batt_temp:[283], charge_raw [2922981 / 3167000]
 [   15.506185 / 01-05 02:21:56.079][0] init: Service 'su_daemon' is being killed...
 [   15.576670 / 01-05 02:21:56.149][0] init: Starting service 'lge-usb-vzw-sh'...
 [   15.577631 / 01-05 02:21:56.149][0] init: Service 'sensor-sh' (pid 523) exited with status 0
 [   15.577865 / 01-05 02:21:56.149][0] init: Service 'su_daemon' (pid 540) killed by signal 9
 [   15.577883 / 01-05 02:21:56.149][0] init: Service 'su_daemon' (pid 540) killing any children in process group
 [   15.618537 / 01-05 02:21:56.189][0] init: Starting service 'su_daemon'...
 [   15.651653 / 01-05 02:21:56.229][0] init: Starting service 'sensors'...
 [   15.671420 / 01-05 02:21:56.249][0] init: Service 'lge-usb-vzw-sh' (pid 769) exited with status 127
 [   15.694649 / 01-05 02:21:56.269][0] android_usb android0: gadget enable(0)
 [   15.694671 / 01-05 02:21:56.269][0] android_disable: android_disable: checked disable_depth(0)
 [   15.694685 / 01-05 02:21:56.269][0] dwc3 6a00000.dwc3: request ffffffc0f5cadd00 was not queued to ep0out
 [   15.694909 / 01-05 02:21:56.269][0] ffs_function_disable: ffs_function_disable: config->opened(1)
 [   15.695667 / 01-05 02:21:56.269][0] android_usb android0: LGE-USB request function list: mtp,adb:mtp,acm,diag,adb
 [   15.695782 / 01-05 02:21:56.269][0] android_usb android0: gadget enable(1)
 [   15.695814 / 01-05 02:21:56.269][0] ffs_function_enable: ffs_function_enable: config->opened(1)
 [   15.695823 / 01-05 02:21:56.269][0] android_enable: android_enable: checked disable_depth(1)
 [   15.695831 / 01-05 02:21:56.269][0] mtp_bind_config
 [   15.695952 / 01-05 02:21:56.269][0] mtp_bind_config
 [   15.731880 / 01-05 02:21:56.309][0] dwc3_gadget_run_stop Queue DCP check work! 0
 [   15.769451 / 01-05 02:21:56.339][0] init: Starting service 'imsdatadaemon'...
 [   15.806354 / 01-05 02:21:56.379][2] init: Starting service 'bootanim'...
 [   15.806547 / 01-05 02:21:56.379][1] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xd4/0xe4 mode:0
 [   15.806564 / 01-05 02:21:56.379][1] mdss_fb_blank_sub: mdss_fb_blank_sub: -
 [   15.806568 / 01-05 02:21:56.379][1] [Touch] FB_UNBLANK
 [   15.836896 / 01-05 02:21:56.409][0] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
 [   15.870102 / 01-05 02:21:56.449][0] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
 [   15.870288 / 01-05 02:21:56.449][0] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
 [   15.870299 / 01-05 02:21:56.449][0] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
 [   15.890989 / 01-05 02:21:56.469][2] init: Service 'energy-awareness' (pid 548) exited with status 0
 [   15.897465 / 01-05 02:21:56.469][2] init: Service 'qcom-sh' (pid 599) exited with status 0
 [   15.983094 / 01-05 02:21:56.559][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
 [   15.999380 / 01-05 02:21:56.569][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
 [   16.020875 / 01-05 02:21:56.599][0] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
 [   16.055103 / 01-05 02:21:56.629][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
 [   16.058977 / 01-05 02:21:56.629][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
 [   16.071387 / 01-05 02:21:56.649][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
 [   16.074171 / 01-05 02:21:56.649][0] [CCAudit] do_sys_open error=-13 file=/sys/power/wake_lock flag=655362 proc=ApmAudio parent=init
 [   16.146998 / 01-05 02:21:56.719][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
 [   16.147734 / 01-05 02:21:56.719][0] WIN/LINUX ACM bInterfaceClass change to fs:2
 [   16.147984 / 01-05 02:21:56.719][0] WIN/LINUX ACM bInterfaceClass change to fs:2
 [   16.150208 / 01-05 02:21:56.729][0] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
 [   16.210138 / 01-05 02:21:56.789][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
 [   16.292745 / 01-05 02:21:56.869][3] [CCAudit] do_sys_open error=-13 file=/proc/self/oom_score_adj flag=655361 proc=adbd parent=adbd
 [   16.339742 / 01-05 02:21:56.909][1] es9218_codec_probe(): entry
 [   16.339757 / 01-05 02:21:56.909][1] es9218_codec_probe(): exit 
 [   16.341819 / 01-05 02:21:56.919][2] QSEECOM: qseecom_load_app: App (fpctzapp) does'nt exist, loading apps for first time
 [   16.359747 / 01-05 02:21:56.929][1] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: no source widget found for SLIMBUS_2_RX
 [   16.359770 / 01-05 02:21:56.929][1] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: Failed to add route SLIMBUS_2_RX -> direct -> Slimbus2 Playback
 [   16.359902 / 01-05 02:21:56.929][1] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: no sink widget found for SLIMBUS_2_TX
 [   16.359915 / 01-05 02:21:56.929][1] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: Failed to add route Slimbus2 Capture -> direct -> SLIMBUS_2_TX
 [   16.380142 / 01-05 02:21:56.959][0] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
 [   16.380194 / 01-05 02:21:56.959][0] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
 [   16.467249 / 01-05 02:21:57.039][1] msm_audrx_init: dev_namesoc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-0-rx
 [   16.501512 / 01-05 02:21:57.079][1] wsa881x wsa881x.21170213: wsa881x_init: WSA881X_IS_2_0
 [   16.611183 / 01-05 02:21:57.189][1] input: msm8996-tasha-snd-card Headset Jack as /devices/soc/soc:sound-9335/sound/card0/input3
 [   16.611536 / 01-05 02:21:57.189][1] input: msm8996-tasha-snd-card Button Jack as /devices/soc/soc:sound-9335/sound/card0/input4
 [   16.611700 / 01-05 02:21:57.189][1] keychord: using input dev msm8996-tasha-snd-card Button Jack for fevent
 [   16.612974 / 01-05 02:21:57.189][1] msm8996-pinctrl 1010000.pinctrl: not freeing pin 68 (GPIO_68) as part of deactivating group gpio68 - it is already used for some other setting
 [   16.613097 / 01-05 02:21:57.189][1] msm8996-asoc-snd soc:sound-9335: Sound card msm8996-tasha-snd-card registered
 [   16.613110 / 01-05 02:21:57.189][1] msm8996-asoc-snd soc:sound-9335: property qcom,us-euro-gpios not detected in node /soc/sound-9335
 [   16.613118 / 01-05 02:21:57.189][1] drv probe : 14888 msm8996-asoc-snd 1724
 [   16.982714 / 01-05 02:21:57.559][3] QSEECOM: qseecom_load_app: App with id 5 (fpctzapp) now loaded
 [   16.994538 / 01-05 02:21:57.569][2] [CCAudit] do_sys_open error=-13 file=/sys/kernel/debug/tracing/trace_marker flag=655361 proc=BootAnimation parent=init
 [   17.008879 / 01-05 02:21:57.579][2] [CCAudit] do_sys_open error=-13 file=/sys/kernel/debug/tracing/trace_marker flag=655361 proc=cameraserver parent=init
 [   17.019300 / 01-05 02:21:57.599][1] pil-q6v5-mss 2080000.qcom,mss: modem: modem.mdt starting auth and reset
 [   17.021095 / 01-05 02:21:57.599][1] pil-q6v5-mss 2080000.qcom,mss: modem: Brought out of reset
 [   17.048627 / 01-05 02:21:57.619][2] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
 [   17.051200 / 01-05 02:21:57.629][2] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
 [   17.051292 / 01-05 02:21:57.629][2] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
 [   17.051359 / 01-05 02:21:57.629][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
 [   17.051366 / 01-05 02:21:57.629][2] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
 [   17.051426 / 01-05 02:21:57.629][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
 [   17.051433 / 01-05 02:21:57.629][2] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
 [   17.051494 / 01-05 02:21:57.629][2] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
 [   17.051554 / 01-05 02:21:57.629][2] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
 [   17.051612 / 01-05 02:21:57.629][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
 [   17.051618 / 01-05 02:21:57.629][2] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
 [   17.051671 / 01-05 02:21:57.629][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
 [   17.051678 / 01-05 02:21:57.629][2] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
 [   17.051739 / 01-05 02:21:57.629][2] es9218_left_volume_get(): Left Volume= -0 db
 [   17.051795 / 01-05 02:21:57.629][2] es9218_right_volume_get(): Right Volume= -0 db
 [   17.051850 / 01-05 02:21:57.629][2] es9218_master_volume_get(): Master Volume= -0 db
 [   17.051906 / 01-05 02:21:57.629][2] es9218_filter_enum_get(): ucontrol = 8
 [   17.051966 / 01-05 02:21:57.629][2] es9218_power_state_get(): power state = 0
 [   17.051972 / 01-05 02:21:57.629][2] es9218_power_state_get(): ucontrol = 0
 [   17.052029 / 01-05 02:21:57.629][2] es9218_clk_divider_get() : invalid state = CLOSE
 [   17.052087 / 01-05 02:21:57.629][2] es9218_chip_state_get(): enter
 [   17.052121 / 01-05 02:21:57.629][2] es9218_power_gpio_H(): pa_gpio_level = 1
 [   17.053148 / 01-05 02:21:57.629][2] es9218_reset_gpio_H(): pa_gpio_level = 1
 [   17.054763 / 01-05 02:21:57.629][2] es9218_chip_state_get : i2_read success : 0
 [   17.054790 / 01-05 02:21:57.629][2] es9218_reset_gpio_L(): pa_gpio_level = 0
 [   17.054795 / 01-05 02:21:57.629][2] es9218_chip_state_get(): leave
 [   17.055018 / 01-05 02:21:57.629][2] es9218_avc_volume_get(): AVC Volume= -0 db
 [   17.055079 / 01-05 02:21:57.629][2] es9218_headset_type_get(): type = 0 
 [   17.055131 / 01-05 02:21:57.629][2] es9218_dop_get() 0
 [   17.055187 / 01-05 02:21:57.629][2] es9218_auto_mute_get(): type = 0 
 [   17.055241 / 01-05 02:21:57.629][2] es9218_sabre_wcdon2bypass_get(): power state = 0
 [   17.056021 / 01-05 02:21:57.629][2] msm_pcm_volume_ctl_get substream runtime not found
 [   17.056224 / 01-05 02:21:57.629][2] msm_pcm_volume_ctl_get substream runtime not found
 [   17.056420 / 01-05 02:21:57.629][2] msm_pcm_volume_ctl_get substream runtime not found
 [   17.056525 / 01-05 02:21:57.629][2] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.056909 / 01-05 02:21:57.629][2] msm_pcm_volume_ctl_get substream runtime not found
 [   17.057021 / 01-05 02:21:57.629][2] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.057308 / 01-05 02:21:57.629][2] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.057598 / 01-05 02:21:57.629][2] msm_pcm_volume_ctl_get substream runtime not found
 [   17.057655 / 01-05 02:21:57.629][2] msm_pcm_volume_ctl_get substream or runtime not found
 [   17.057938 / 01-05 02:21:57.629][2] msm_pcm_volume_ctl_get substream runtime not found
 [   17.058050 / 01-05 02:21:57.629][2] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.058336 / 01-05 02:21:57.629][2] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.058626 / 01-05 02:21:57.629][2] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.058923 / 01-05 02:21:57.629][2] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.059226 / 01-05 02:21:57.629][2] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.059532 / 01-05 02:21:57.629][2] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.059929 / 01-05 02:21:57.629][2] msm_pcm_volume_ctl_get substream runtime not found
 [   17.061241 / 01-05 02:21:57.639][2] msm_pcm_volume_ctl_get substream runtime not found
 [   17.095926 / 01-05 02:21:57.669][2] pil-q6v5-mss 2080000.qcom,mss: modem: Power/Clock ready interrupt received
 [   17.095946 / 01-05 02:21:57.669][0] pil-q6v5-mss 2080000.qcom,mss: Subsystem error monitoring/handling services are up
 [   17.097774 / 01-05 02:21:57.669][1] IPA received MPSS AFTER_POWERUP
 [   17.097788 / 01-05 02:21:57.669][1] IPA AFTER_POWERUP handling is complete
 [   17.099131 / 01-05 02:21:57.669][3] M-Notify: General: 7
 [   17.146522 / 01-05 02:21:57.729][1] msm_pm_qos_add_request: add request
 [   17.151803 / 01-05 02:21:57.729][1] camera id 0 Slave addr 0x34 addr_type 2
 [   17.151823 / 01-05 02:21:57.729][1] sensor_id_reg_addr 0x16 sensor_id 0x298 sensor id mask 0
 [   17.151830 / 01-05 02:21:57.729][1] power up size 6 power down size 6
 [   17.151838 / 01-05 02:21:57.729][1] position 0
 [   17.151843 / 01-05 02:21:57.729][1] mount 90s_ctrl[0] 0000000000000000
 [   17.151857 / 01-05 02:21:57.729][1] msm_sensor_get_power_up_settings: forcing imx298_lgit_power_up
 [   17.151867 / 01-05 02:21:57.729][1] UP seq_type 1 seq_val 8 config_val 0 delay 1
 [   17.151874 / 01-05 02:21:57.729][1] UP seq_type 1 seq_val 4 config_val 2 delay 0
 [   17.151881 / 01-05 02:21:57.729][1] UP seq_type 2 seq_val 0 config_val 0 delay 0
 [   17.151888 / 01-05 02:21:57.729][1] UP seq_type 2 seq_val 1 config_val 0 delay 0
 [   17.151895 / 01-05 02:21:57.729][1] UP seq_type 2 seq_val 4 config_val 0 delay 0
 [   17.151901 / 01-05 02:21:57.729][1] UP seq_type 2 seq_val 5 config_val 0 delay 0
 [   17.151908 / 01-05 02:21:57.729][1] UP seq_type 0 seq_val 0 config_val 24000000 delay 1
 [   17.151915 / 01-05 02:21:57.729][1] UP seq_type 1 seq_val 7 config_val 2 delay 1
 [   17.151921 / 01-05 02:21:57.729][1] UP seq_type 1 seq_val 0 config_val 2 delay 1
 [   17.151928 / 01-05 02:21:57.729][1] UP seq_type 1 seq_val 8 config_val 2 delay 21
 [   17.151935 / 01-05 02:21:57.729][1] msm_sensor_get_power_down_settings: forcing imx298_lgit_power_down
 [   17.151942 / 01-05 02:21:57.729][1] DOWN seq_type 0 seq_val 0 config_val 0 delay 1
 [   17.151948 / 01-05 02:21:57.729][1] DOWN seq_type 1 seq_val 8 config_val 0 delay 1
 [   17.151955 / 01-05 02:21:57.729][1] DOWN seq_type 1 seq_val 0 config_val 0 delay 1
 [   17.151961 / 01-05 02:21:57.729][1] DOWN seq_type 2 seq_val 5 config_val 0 delay 0
 [   17.151968 / 01-05 02:21:57.729][1] DOWN seq_type 2 seq_val 4 config_val 0 delay 0
 [   17.151974 / 01-05 02:21:57.729][1] DOWN seq_type 2 seq_val 1 config_val 0 delay 0
 [   17.151981 / 01-05 02:21:57.729][1] DOWN seq_type 2 seq_val 0 config_val 0 delay 0
 [   17.151987 / 01-05 02:21:57.729][1] DOWN seq_type 1 seq_val 4 config_val 0 delay 0
 [   17.151994 / 01-05 02:21:57.729][1] DOWN seq_type 1 seq_val 7 config_val 0 delay 1
 [   17.152004 / 01-05 02:21:57.729][1] msm_camera_fill_vreg_params:185 i 4 j 4 cam_oisvdd
 [   17.152012 / 01-05 02:21:57.729][1] msm_camera_fill_vreg_params:196 i 5 j 5 cam_oisdvdd
 [   17.152020 / 01-05 02:21:57.729][1] msm_camera_fill_vreg_params:196 i 3 j 5 cam_oisdvdd
 [   17.152026 / 01-05 02:21:57.729][1] msm_camera_fill_vreg_params:185 i 4 j 4 cam_oisvdd
 [   17.152183 / 01-05 02:21:57.729][1] msm_sensor_fill_eeprom_subdevid_by_name:330 Eeprom userspace probe for lc898123f40
 [   17.152193 / 01-05 02:21:57.729][1] msm_sensor_fill_eeprom_subdevid_by_name:352 Eeprom subdevice id is 0
 [   17.152242 / 01-05 02:21:57.729][1] msm_sensor_fill_actuator_subdevid_by_name qcom,actuator cell index 0, rc 0
 [   17.152254 / 01-05 02:21:57.729][1] msm_sensor_fill_tcs_subdevid_by_name:479 src_node NULL
 [   17.152301 / 01-05 02:21:57.729][1] msm_sensor_fill_proxy_subdevid_by_name qcom,proxy cell index 0, rc 0
 [   17.152311 / 01-05 02:21:57.729][1] msm_sensor_fill_iris_subdevid_by_name:567 src_node NULL
 [   17.198676 / 01-05 02:21:57.769][3] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
 [   17.201286 / 01-05 02:21:57.779][0] msm_cci_init:1399: hw_version = 0x10040000
 [   17.201506 / 01-05 02:21:57.779][0] msm_cci_irq:1755 MASTER_0 error 0x10000000
 [   17.201813 / 01-05 02:21:57.779][1] msm_cci_i2c_read:930 read_words = 0, exp words = 1
 [   17.201830 / 01-05 02:21:57.779][1] msm_cci_i2c_read_bytes:1013 failed rc -22
 [   17.201838 / 01-05 02:21:57.779][1] msm_camera_cci_i2c_read: line 45 rc = -22
 [   17.201846 / 01-05 02:21:57.779][1] msm_sensor_match_id: imx298_mitsumi: read id failed
 [   17.201853 / 01-05 02:21:57.779][1] msm_sensor_check_id:1432 match id failed rc -22
 [   17.251665 / 01-05 02:21:57.829][3] [Display] mdss_dsi_on-:
 [   17.256636 / 01-05 02:21:57.829][3] [LCD][LM3697] lm3697_set_main_current_level : backlight level=0, cal_value=0 
 [   17.270084 / 01-05 02:21:57.849][3] lm3697_backlight_off
 [   17.291040 / 01-05 02:21:57.869][3] msm_cci_init:1399: hw_version = 0x10040000
 [   17.291258 / 01-05 02:21:57.869][0] msm_cci_irq:1755 MASTER_0 error 0x10000000
 [   17.291313 / 01-05 02:21:57.869][3] msm_cci_i2c_read:930 read_words = 0, exp words = 1
 [   17.291321 / 01-05 02:21:57.869][3] msm_cci_i2c_read_bytes:1013 failed rc -22
 [   17.291328 / 01-05 02:21:57.869][3] msm_camera_cci_i2c_read: line 45 rc = -22
 [   17.291334 / 01-05 02:21:57.869][3] msm_sensor_match_id: imx298_mitsumi: read id failed
 [   17.291340 / 01-05 02:21:57.869][3] msm_sensor_check_id:1432 match id failed rc -22
 [   17.338076 / 01-05 02:21:57.909][0] apr_tal:Modem Is Up
 [   17.342023 / 01-05 02:21:57.919][0] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000
 [   17.367785 / 01-05 02:21:57.939][3] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01
 [   17.367897 / 01-05 02:21:57.939][3] ipa-wan handle_indication_req:133 not send indication
 [   17.369215 / 01-05 02:21:57.939][1] QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received
 [   17.369396 / 01-05 02:21:57.939][1] ipa ipa_uc_response_hdlr:461 IPA uC loaded
 [   17.369440 / 01-05 02:21:57.939][1] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
 [   17.370944 / 01-05 02:21:57.949][1] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
 [   17.371659 / 01-05 02:21:57.949][1] ipa ipa_uc_wdi_event_log_info_handler:338 WDI stats ofst=0x45130
 [   17.371673 / 01-05 02:21:57.949][1] ipa ipa_uc_ntn_event_log_info_handler:39 NTN feature missing 0x9
 [   17.371695 / 01-05 02:21:57.949][1] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
 [   17.390764 / 01-05 02:21:57.969][3] msm_cci_init:1399: hw_version = 0x10040000
 [   17.391081 / 01-05 02:21:57.969][0] msm_cci_irq:1755 MASTER_0 error 0x10000000
 [   17.391539 / 01-05 02:21:57.969][3] msm_cci_i2c_read:930 read_words = 0, exp words = 1
 [   17.391552 / 01-05 02:21:57.969][3] msm_cci_i2c_read_bytes:1013 failed rc -22
 [   17.391559 / 01-05 02:21:57.969][3] msm_camera_cci_i2c_read: line 45 rc = -22
 [   17.391565 / 01-05 02:21:57.969][3] msm_sensor_match_id: imx298_mitsumi: read id failed
 [   17.391572 / 01-05 02:21:57.969][3] msm_sensor_check_id:1432 match id failed rc -22
 [   17.429935 / 01-05 02:21:57.999][3] [CCAudit] do_sys_open error=-13 file=/sys/kernel/debug/tracing/trace_marker flag=655361 proc=AudioOut_D parent=init
 [   17.430157 / 01-05 02:21:58.009][3] msm_sensor_power_up(205) imx298_mitsumi
 [   17.430163 / 01-05 02:21:58.009][3] imx298_mitsumi power up failed
 [   17.430174 / 01-05 02:21:58.009][3] MSM-SENSOR-INIT msm_sensor_driver_cmd:82 msm_sensor_driver_cmd failed (non-fatal) rc -22
 [   17.430181 / 01-05 02:21:58.009][3] MSM-SENSOR-INIT msm_sensor_init_subdev_do_ioctl:148 msm_sensor_init_subdev_do_ioctl:148 VIDIOC_MSM_SENSOR_INIT_CFG failed (non-fatal)
 [   17.434903 / 01-05 02:21:58.009][3] camera id 0 Slave addr 0x20 addr_type 2
 [   17.434918 / 01-05 02:21:58.009][3] sensor_id_reg_addr 0x16 sensor_id 0x298 sensor id mask 0
 [   17.434924 / 01-05 02:21:58.009][3] power up size 10 power down size 9
 [   17.434930 / 01-05 02:21:58.009][3] position 0
 [   17.434934 / 01-05 02:21:58.009][3] mount 90s_ctrl[0] 0000000000000000
 [   17.434945 / 01-05 02:21:58.009][3] msm_sensor_get_power_up_settings: forcing imx298_lgit_power_up
 [   17.434953 / 01-05 02:21:58.009][3] UP seq_type 1 seq_val 8 config_val 0 delay 1
 [   17.434959 / 01-05 02:21:58.009][3] UP seq_type 1 seq_val 4 config_val 2 delay 0
 [   17.434964 / 01-05 02:21:58.009][3] UP seq_type 2 seq_val 0 config_val 0 delay 0
 [   17.434969 / 01-05 02:21:58.009][3] UP seq_type 2 seq_val 1 config_val 0 delay 0
 [   17.434975 / 01-05 02:21:58.009][3] UP seq_type 2 seq_val 4 config_val 0 delay 0
 [   17.434980 / 01-05 02:21:58.009][3] UP seq_type 2 seq_val 5 config_val 0 delay 0
 [   17.434986 / 01-05 02:21:58.009][3] UP seq_type 0 seq_val 0 config_val 24000000 delay 1
 [   17.434991 / 01-05 02:21:58.009][3] UP seq_type 1 seq_val 7 config_val 2 delay 1
 [   17.434996 / 01-05 02:21:58.009][3] UP seq_type 1 seq_val 0 config_val 2 delay 1
 [   17.435001 / 01-05 02:21:58.009][3] UP seq_type 1 seq_val 8 config_val 2 delay 21
 [   17.435007 / 01-05 02:21:58.009][3] msm_sensor_get_power_down_settings: forcing imx298_lgit_power_down
 [   17.435012 / 01-05 02:21:58.009][3] DOWN seq_type 0 seq_val 0 config_val 0 delay 1
 [   17.435018 / 01-05 02:21:58.009][3] DOWN seq_type 1 seq_val 8 config_val 0 delay 1
 [   17.435023 / 01-05 02:21:58.009][3] DOWN seq_type 1 seq_val 0 config_val 0 delay 1
 [   17.435045 / 01-05 02:21:58.009][3] DOWN seq_type 2 seq_val 5 config_val 0 delay 0
 [   17.435050 / 01-05 02:21:58.009][3] DOWN seq_type 2 seq_val 4 config_val 0 delay 0
 [   17.435054 / 01-05 02:21:58.009][3] DOWN seq_type 2 seq_val 1 config_val 0 delay 0
 [   17.435059 / 01-05 02:21:58.009][3] DOWN seq_type 2 seq_val 0 config_val 0 delay 0
 [   17.435063 / 01-05 02:21:58.009][3] DOWN seq_type 1 seq_val 4 config_val 0 delay 0
 [   17.435068 / 01-05 02:21:58.009][3] DOWN seq_type 1 seq_val 7 config_val 0 delay 1
 [   17.435077 / 01-05 02:21:58.009][3] msm_camera_fill_vreg_params:185 i 4 j 4 cam_oisvdd
 [   17.435082 / 01-05 02:21:58.009][3] msm_camera_fill_vreg_params:196 i 5 j 5 cam_oisdvdd
 [   17.435087 / 01-05 02:21:58.009][3] msm_camera_fill_vreg_params:196 i 3 j 5 cam_oisdvdd
 [   17.435092 / 01-05 02:21:58.009][3] msm_camera_fill_vreg_params:185 i 4 j 4 cam_oisvdd
 [   17.435242 / 01-05 02:21:58.009][3] msm_sensor_fill_eeprom_subdevid_by_name:330 Eeprom userspace probe for brcb032gwz
 [   17.435249 / 01-05 02:21:58.009][3] msm_sensor_fill_eeprom_subdevid_by_name:352 Eeprom subdevice id is 0
 [   17.435272 / 01-05 02:21:58.009][3] msm_sensor_fill_actuator_subdevid_by_name qcom,actuator cell index 0, rc 0
 [   17.435296 / 01-05 02:21:58.009][3] msm_sensor_fill_ois_subdevid_by_name qcom,ois cell index 0, rc 0
 [   17.435306 / 01-05 02:21:58.009][3] msm_sensor_fill_tcs_subdevid_by_name:479 src_node NULL
 [   17.435329 / 01-05 02:21:58.009][3] msm_sensor_fill_proxy_subdevid_by_name qcom,proxy cell index 0, rc 0
 [   17.490784 / 01-05 02:21:58.069][1] msm_cci_init:1399: hw_version = 0x10040000
 [   17.491103 / 01-05 02:21:58.069][1] msm_sensor_power_up(205) imx298_lgit
 [   17.491112 / 01-05 02:21:58.069][1] imx298_lgit probe succeeded
 [   17.491365 / 01-05 02:21:58.069][1] rc 0 session_id 2<6>[   17.491466 / 01-05 02:21:58.069][1] msm_sensor_power_down(147) imx298_lgit
 [   17.517650 / 01-05 02:21:58.089][1] camera id 1 Slave addr 0x40 addr_type 2
 [   17.517670 / 01-05 02:21:58.089][1] sensor_id_reg_addr 0xF16 sensor_id 0x553 sensor id mask 0
 [   17.517676 / 01-05 02:21:58.089][1] power up size 5 power down size 5
 [   17.517685 / 01-05 02:21:58.089][1] position 1
 [   17.517690 / 01-05 02:21:58.089][1] mount 270s_ctrl[1] 0000000000000000
 [   17.517704 / 01-05 02:21:58.089][1] msm_sensor_get_power_up_settings: forcing hi553_power_up
 [   17.517713 / 01-05 02:21:58.089][1] UP seq_type 2 seq_val 1 config_val 0 delay 0
 [   17.517721 / 01-05 02:21:58.089][1] UP seq_type 2 seq_val 2 config_val 0 delay 0
 [   17.517728 / 01-05 02:21:58.089][1] UP seq_type 2 seq_val 0 config_val 0 delay 0
 [   17.517735 / 01-05 02:21:58.089][1] UP seq_type 0 seq_val 0 config_val 24000000 delay 1
 [   17.517742 / 01-05 02:21:58.089][1] UP seq_type 1 seq_val 0 config_val 2 delay 1
 [   17.517749 / 01-05 02:21:58.089][1] msm_sensor_get_power_down_settings: forcing hi553_power_down
 [   17.517756 / 01-05 02:21:58.089][1] DOWN seq_type 1 seq_val 0 config_val 0 delay 1
 [   17.517763 / 01-05 02:21:58.089][1] DOWN seq_type 0 seq_val 0 config_val 0 delay 1
 [   17.517769 / 01-05 02:21:58.089][1] DOWN seq_type 2 seq_val 0 config_val 0 delay 0
 [   17.517775 / 01-05 02:21:58.089][1] DOWN seq_type 2 seq_val 2 config_val 0 delay 0
 [   17.517782 / 01-05 02:21:58.089][1] DOWN seq_type 2 seq_val 1 config_val 0 delay 0
 [   17.518088 / 01-05 02:21:58.089][1] msm_sensor_fill_eeprom_subdevid_by_name:330 Eeprom userspace probe for m24c32_hi553
 [   17.518099 / 01-05 02:21:58.089][1] msm_sensor_fill_eeprom_subdevid_by_name:352 Eeprom subdevice id is 3
 [   17.518110 / 01-05 02:21:58.089][1] msm_sensor_fill_tcs_subdevid_by_name:479 src_node NULL
 [   17.518118 / 01-05 02:21:58.089][1] msm_sensor_fill_proxy_subdevid_by_name:520 src_node NULL
 [   17.526849 / 01-05 02:21:58.099][1] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0x23 (ok)
 [   17.527788 / 01-05 02:21:58.099][1] msm_sensor_power_up(205) hi553
 [   17.527805 / 01-05 02:21:58.099][1] hi553 probe succeeded
 [   17.527820 / 01-05 02:21:58.099][1] msm_sensor_driver_create_i2c_v4l_subdev i2c_camera I2c probe succeeded
 [   17.528133 / 01-05 02:21:58.099][1] msm_sensor_driver_create_i2c_v4l_subdev rc 0 session_id 3
 [   17.528229 / 01-05 02:21:58.099][1] msm_sensor_driver_create_i2c_v4l_subdev:238
 [   17.528239 / 01-05 02:21:58.099][1] msm_sensor_power_down(147) hi553
 [   17.543836 / 01-05 02:21:58.119][1] camera id 2 Slave addr 0x34 addr_type 2
 [   17.543858 / 01-05 02:21:58.119][1] sensor_id_reg_addr 0x0 sensor_id 0x219 sensor id mask 0
 [   17.543865 / 01-05 02:21:58.119][1] power up size 5 power down size 5
 [   17.543874 / 01-05 02:21:58.119][1] position 0
 [   17.543879 / 01-05 02:21:58.119][1] mount 90s_ctrl[2] 0000000000000000
 [   17.543893 / 01-05 02:21:58.119][1] msm_sensor_get_power_up_settings: forcing imx219_power_up
 [   17.543903 / 01-05 02:21:58.119][1] UP seq_type 2 seq_val 0 config_val 0 delay 0
 [   17.543911 / 01-05 02:21:58.119][1] UP seq_type 1 seq_val 4 config_val 2 delay 0
 [   17.543918 / 01-05 02:21:58.119][1] UP seq_type 2 seq_val 1 config_val 0 delay 0
 [   17.543926 / 01-05 02:21:58.119][1] UP seq_type 0 seq_val 0 config_val 24000000 delay 1
 [   17.543934 / 01-05 02:21:58.119][1] UP seq_type 1 seq_val 0 config_val 2 delay 1
 [   17.543942 / 01-05 02:21:58.119][1] msm_sensor_get_power_down_settings: forcing imx219_power_down
 [   17.543950 / 01-05 02:21:58.119][1] DOWN seq_type 1 seq_val 0 config_val 0 delay 1
 [   17.543958 / 01-05 02:21:58.119][1] DOWN seq_type 2 seq_val 1 config_val 0 delay 0
 [   17.543965 / 01-05 02:21:58.119][1] DOWN seq_type 1 seq_val 4 config_val 0 delay 0
 [   17.543971 / 01-05 02:21:58.119][1] DOWN seq_type 2 seq_val 0 config_val 0 delay 0
 [   17.543978 / 01-05 02:21:58.119][1] DOWN seq_type 0 seq_val 0 config_val 0 delay 0
 [   17.544138 / 01-05 02:21:58.119][1] msm_sensor_fill_eeprom_subdevid_by_name:330 Eeprom userspace probe for m24c32_imx219
 [   17.544148 / 01-05 02:21:58.119][1] msm_sensor_fill_eeprom_subdevid_by_name:352 Eeprom subdevice id is 2
 [   17.544157 / 01-05 02:21:58.119][1] msm_sensor_fill_tcs_subdevid_by_name:479 src_node NULL
 [   17.544165 / 01-05 02:21:58.119][1] msm_sensor_fill_proxy_subdevid_by_name:520 src_node NULL
 [   17.552493 / 01-05 02:21:58.129][1] msm_cci_init:1399: hw_version = 0x10040000
 [   17.552771 / 01-05 02:21:58.129][1] msm_sensor_power_up(205) imx219
 [   17.552780 / 01-05 02:21:58.129][1] imx219 probe succeeded
 [   17.553010 / 01-05 02:21:58.129][1] rc 0 session_id 4<6>[   17.553120 / 01-05 02:21:58.129][1] msm_sensor_power_down(147) imx219
 [   17.563583 / 01-05 02:21:58.139][1] msm_proxy_get_subdev_id:196 Enter
 [   17.607741 / 01-05 02:21:58.179][1] msm_cci_init:1399: hw_version = 0x10040000
 [   17.710772 / 01-05 02:21:58.289][3] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
 [   17.713747 / 01-05 02:21:58.289][3] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
 [   17.713812 / 01-05 02:21:58.289][3] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
 [   17.713868 / 01-05 02:21:58.289][3] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
 [   17.713875 / 01-05 02:21:58.289][3] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
 [   17.713929 / 01-05 02:21:58.289][3] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
 [   17.713936 / 01-05 02:21:58.289][3] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
 [   17.713989 / 01-05 02:21:58.289][3] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
 [   17.714045 / 01-05 02:21:58.289][3] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
 [   17.714149 / 01-05 02:21:58.289][3] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
 [   17.714156 / 01-05 02:21:58.289][3] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
 [   17.714213 / 01-05 02:21:58.289][3] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
 [   17.714219 / 01-05 02:21:58.289][3] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
 [   17.714274 / 01-05 02:21:58.289][3] es9218_left_volume_get(): Left Volume= -0 db
 [   17.714326 / 01-05 02:21:58.289][3] es9218_right_volume_get(): Right Volume= -0 db
 [   17.714377 / 01-05 02:21:58.289][3] es9218_master_volume_get(): Master Volume= -0 db
 [   17.714428 / 01-05 02:21:58.289][3] es9218_filter_enum_get(): ucontrol = 8
 [   17.714479 / 01-05 02:21:58.289][3] es9218_power_state_get(): power state = 0
 [   17.714484 / 01-05 02:21:58.289][3] es9218_power_state_get(): ucontrol = 0
 [   17.714610 / 01-05 02:21:58.289][3] es9218_clk_divider_get() : invalid state = CLOSE
 [   17.714675 / 01-05 02:21:58.289][3] es9218_chip_state_get(): enter
 [   17.714701 / 01-05 02:21:58.289][3] es9218_power_gpio_H(): pa_gpio_level = 1
 [   17.715976 / 01-05 02:21:58.289][3] es9218_reset_gpio_H(): pa_gpio_level = 1
 [   17.717300 / 01-05 02:21:58.289][3] es9218_chip_state_get : i2_read success : 0
 [   17.717323 / 01-05 02:21:58.289][3] es9218_reset_gpio_L(): pa_gpio_level = 0
 [   17.717327 / 01-05 02:21:58.289][3] es9218_chip_state_get(): leave
 [   17.717546 / 01-05 02:21:58.289][3] es9218_avc_volume_get(): AVC Volume= -0 db
 [   17.717599 / 01-05 02:21:58.289][3] es9218_headset_type_get(): type = 0 
 [   17.717650 / 01-05 02:21:58.289][3] es9218_dop_get() 0
 [   17.717757 / 01-05 02:21:58.289][3] es9218_auto_mute_get(): type = 0 
 [   17.717815 / 01-05 02:21:58.289][3] es9218_sabre_wcdon2bypass_get(): power state = 0
 [   17.718754 / 01-05 02:21:58.289][3] msm_pcm_volume_ctl_get substream runtime not found
 [   17.718960 / 01-05 02:21:58.289][3] msm_pcm_volume_ctl_get substream runtime not found
 [   17.719217 / 01-05 02:21:58.289][3] msm_pcm_volume_ctl_get substream runtime not found
 [   17.719323 / 01-05 02:21:58.289][3] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.719783 / 01-05 02:21:58.289][3] msm_pcm_volume_ctl_get substream runtime not found
 [   17.719930 / 01-05 02:21:58.289][3] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.720743 / 01-05 02:21:58.299][3] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.721114 / 01-05 02:21:58.299][3] msm_pcm_volume_ctl_get substream runtime not found
 [   17.721171 / 01-05 02:21:58.299][3] msm_pcm_volume_ctl_get substream or runtime not found
 [   17.721532 / 01-05 02:21:58.299][3] msm_pcm_volume_ctl_get substream runtime not found
 [   17.721640 / 01-05 02:21:58.299][3] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.721990 / 01-05 02:21:58.299][3] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.722349 / 01-05 02:21:58.299][3] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.722804 / 01-05 02:21:58.299][3] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.723966 / 01-05 02:21:58.299][3] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.725194 / 01-05 02:21:58.299][3] msm_compr_audio_effects_config_get: stream or effects inactive
 [   17.725682 / 01-05 02:21:58.299][3] msm_pcm_volume_ctl_get substream runtime not found
 [   17.727731 / 01-05 02:21:58.299][3] msm_pcm_volume_ctl_get substream runtime not found
 [   17.732842 / 01-05 02:21:58.309][3] tasha_codec tasha_codec: tasha_mad_input_put: mic bias source not found for input = DMIC1
 [   17.827432 / 01-05 02:21:58.399][0] sps:BAM 0x0000000007544000 (va:0xffffff8002640000) enabled: ver:0x19, number of pipes:24
 [   17.926928 / 01-05 02:21:58.499][0] msm_cci_init:1399: hw_version = 0x10040000
 [   18.208687 / 01-05 02:21:58.779][0] msm_csid_init: CSID_VERSION = 0x30050000
 [   18.209705 / 01-05 02:21:58.779][0] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
 [   18.211438 / 01-05 02:21:58.789][2] msm_csid_init: CSID_VERSION = 0x30050000
 [   18.212512 / 01-05 02:21:58.789][0] msm_csid_irq CSID2_IRQ_STATUS_ADDR = 0x800
 [   18.213640 / 01-05 02:21:58.789][2] msm_csid_init: CSID_VERSION = 0x30050000
 [   18.214515 / 01-05 02:21:58.789][0] msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800
 [   18.337496 / 01-05 02:21:58.909][2] [CCAudit] do_sys_open error=-13 file=/data/dalvik-cache/arm64/system@[email protected]@classes.dex flag=131650 proc=main parent=init
 [   18.345551 / 01-05 02:21:58.919][0] [CCAudit] do_sys_open error=-13 file=/data/dalvik-cache/arm/system@[email protected]@classes.dex flag=131650 proc=main parent=init
 [   18.372257 / 01-05 02:21:58.949][0] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
 [   18.372276 / 01-05 02:21:58.949][0] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
 [   18.919543 / 01-05 02:21:59.489][1] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
 [   18.919562 / 01-05 02:21:59.489][1] MSM-CPP cpp_init_hardware:885 stream_cnt:0
 [   19.088048 / 01-05 02:21:59.659][2] msm_pm_qos_update_request: update request 100
 [   19.088065 / 01-05 02:21:59.659][2] msm_create_command_ack_q: session_id = 2, stream_id = 0
 [   19.138044 / 01-05 02:21:59.709][0] msm_csid_init: CSID_VERSION = 0x30050000
 [   19.138767 / 01-05 02:21:59.709][0] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
 [   19.166014 / 01-05 02:21:59.739][0] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
 [   19.166032 / 01-05 02:21:59.739][0] MSM-CPP cpp_init_hardware:885 stream_cnt:0
 [   19.185196 / 01-05 02:21:59.759][1] init: avc:  denied  { set } for property=sys.camera.pd_test.result pid=608 uid=1006 gid=1006 scontext=u:r:mm-qcamerad:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=1
 [   19.191931 / 01-05 02:21:59.779][1] msm_pm_qos_update_request: update request -1
 [   19.200348 / 01-05 02:21:59.779][1] msm_cci_init:1399: hw_version = 0x10040000
 [   19.200633 / 01-05 02:21:59.779][1] msm_sensor_power_up(205) imx298_lgit
 [   19.308374 / 01-05 02:21:59.879][2] msm_ois_init : LGIT rohm i2c shift addr 0x3e!
 [   19.308503 / 01-05 02:21:59.879][2] msm_proxy_thread_start:729 msm_proxy_thread_start
 [   19.313390 / 01-05 02:21:59.889][2] msm_proxy_thread_start:744 INIT_WORK done!
 [   19.313416 / 01-05 02:21:59.889][2] msm_proxy_thread_start:747 queue_work done!
 [   19.320479 / 01-05 02:21:59.899][2] msm_init_proxy_EwokAPI:2019 msm_init_proxy_EwokAPI(): Starting...
 [   19.340685 / 01-05 02:21:59.919][2] lgit_imx298_init_set_rohm_ois:610 Enter, 16-07-26, 16M LGIT OIS bu24333GWL
 [   19.340900 / 01-05 02:21:59.919][2] [CHECK] lgit_imx298_init_set_rohm_ois: Apply THIN_1226_LGIT_ACTUATOR_LGIT_VER16_REL_BIN_DATA, 14s
 [   19.340908 / 01-05 02:21:59.919][2] lgit_imx298_rohm_ois_bin_download:275 Enter
 [   19.422333 / 01-05 02:21:59.999][1] msm_init_proxy_EwokAPI:2168 read offset = -34 from eeprom
 [   19.423367 / 01-05 02:21:59.999][1] msm_init_proxy_EwokAPI:2172 e2p_offset = -34, st_offset = 41000, sensor_offset = 7
 [   19.427449 / 01-05 02:21:59.999][1] msm_init_proxy_EwokAPI:2432 msm_init_proxy_EwokAPI(): End!
 [   19.427467 / 01-05 02:21:59.999][1] msm_proxy_config:1605 msm_proxy_config: Proxy is on! error_code = 0  
 [   19.465771 / 01-05 02:22:00.039][1] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
 [   19.469539 / 01-05 02:22:00.039][1] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
 [   19.474495 / 01-05 02:22:00.049][1] ipa-wan ipa_wwan_ioctl:1524 get AGG size 8192 count 10
 [   19.478556 / 01-05 02:22:00.049][1] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
 [   19.495326 / 01-05 02:22:00.069][1] ipa ipa_assign_policy:3112 get close-by 8192
 [   19.495348 / 01-05 02:22:00.069][1] ipa ipa_assign_policy:3118 set rx_buff_sz 7680
 [   19.495358 / 01-05 02:22:00.069][1] ipa ipa_assign_policy:3141 set aggr_limit 6
 [   19.510480 / 01-05 02:22:00.089][1] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data0) register to IPA
 [   19.603169 / 01-05 02:22:00.179][1] lgit_imx298_rohm_ois_bin_download:333 End
 [   19.603188 / 01-05 02:22:00.179][1] lgit_imx298_rohm_ois_init_cmd:344 Enter
 [   19.629666 / 01-05 02:22:00.199][1] lgit_imx298_rohm_ois_init_cmd:404 End
 [   19.629683 / 01-05 02:22:00.199][1] lgit_imx298_init_set_rohm_ois:685 End
 [   19.629913 / 01-05 02:22:00.199][0] lgit_imx298_rohm_ois_off:731 Enter
 [   19.644072 / 01-05 02:22:00.219][0] lgit_imx298_rohm_ois_off:742 End
 [   19.644560 / 01-05 02:22:00.219][0] stop_proxy:699 stop_proxy!
 [   19.649629 / 01-05 02:22:00.219][1] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data1) register to IPA
 [   19.660103 / 01-05 02:22:00.239][1] get_proxy:695 end workqueue!
 [   19.661731 / 01-05 02:22:00.239][0] stop_proxy:708 destroy_workqueue!
 [   19.663310 / 01-05 02:22:00.239][0] msm_proxy_thread_end:754 msm_proxy_thread_end
 [   19.663328 / 01-05 02:22:00.239][0] stop_proxy:699 stop_proxy!
 [   19.664118 / 01-05 02:22:00.239][0] msm_flash_off:387 msm_flash_off done
 [   19.664773 / 01-05 02:22:00.239][0] CAM_PREVIEW_TUNE_OFF
 [   19.664793 / 01-05 02:22:00.239][0] msm_sensor_power_down(147) imx298_lgit
 [   19.666581 / 01-05 02:22:00.239][1] SMBCHG: smbchg_switch_buck_frequency: Fsw not changed, flash_active: 0
 [   19.666594 / 01-05 02:22:00.239][1] SMBCHG: smbchg_otg_pulse_skip_disable: enabling pulse skip, reason 2
 [   19.666603 / 01-05 02:22:00.239][1] vote: name[SMBCHG: usb_suspend], client_id[1], state[0], val[0]
 [   19.666614 / 01-05 02:22:00.239][1] SMBCHG: usb_suspend: 1 voting for 0 - off
 [   19.685059 / 01-05 02:22:00.259][1] msm_delete_command_ack_q: session_id = 2, stream_id = 0
 [   19.685085 / 01-05 02:22:00.259][1] msm_destroy_session: session_id = 2
 [   19.686104 / 01-05 02:22:00.259][1] msm_pm_qos_update_request: update request 100
 [   19.686128 / 01-05 02:22:00.259][1] msm_create_command_ack_q: session_id = 3, stream_id = 0
 [   19.705165 / 01-05 02:22:00.279][0] msm_csid_init: CSID_VERSION = 0x30050000
 [   19.705709 / 01-05 02:22:00.279][0] msm_csid_irq CSID2_IRQ_STATUS_ADDR = 0x800
 [   19.720899 / 01-05 02:22:00.299][0] msm_sensor_power_up(205) hi553
 [   19.731264 / 01-05 02:22:00.309][0] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
 [   19.731281 / 01-05 02:22:00.309][0] MSM-CPP cpp_init_hardware:885 stream_cnt:0
 [   19.757270 / 01-05 02:22:00.339][1] msm_pm_qos_update_request: update request -1
 [   19.760757 / 01-05 02:22:00.339][1] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data2) register to IPA
 [   19.871639 / 01-05 02:22:00.449][0] CAM_PREVIEW_TUNE_OFF
 [   19.871659 / 01-05 02:22:00.449][0] msm_sensor_power_down(147) hi553
 [   19.873948 / 01-05 02:22:00.449][0] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data3) register to IPA
 [   19.884998 / 01-05 02:22:00.459][1] msm_delete_command_ack_q: session_id = 3, stream_id = 0
 [   19.885021 / 01-05 02:22:00.459][1] msm_destroy_session: session_id = 3
 [   19.885866 / 01-05 02:22:00.459][1] msm_pm_qos_update_request: update request 100
 [   19.885891 / 01-05 02:22:00.459][1] msm_create_command_ack_q: session_id = 4, stream_id = 0
 [   19.895866 / 01-05 02:22:00.469][0] msm_csid_init: CSID_VERSION = 0x30050000
 [   19.896881 / 01-05 02:22:00.469][0] msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800
 [   19.910299 / 01-05 02:22:00.489][0] msm_cci_init:1399: hw_version = 0x10040000
 [   19.910544 / 01-05 02:22:00.489][0] msm_sensor_power_up(205) imx219
 [   19.916391 / 01-05 02:22:00.489][3] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
 [   19.916408 / 01-05 02:22:00.489][3] MSM-CPP cpp_init_hardware:885 stream_cnt:0
 [   19.921092 / 01-05 02:22:00.529][2] msm_pm_qos_update_request: update request -1
 [   19.951232 / 01-05 02:22:00.529][2] msm_flash_off:387 msm_flash_off done
 [   19.951276 / 01-05 02:22:00.529][2] CAM_PREVIEW_TUNE_OFF
 [   19.951288 / 01-05 02:22:00.529][2] msm_sensor_power_down(147) imx219
 [   19.954041 / 01-05 02:22:00.529][1] SMBCHG: smbchg_switch_buck_frequency: Fsw not changed, flash_active: 0
 [   19.954054 / 01-05 02:22:00.529][1] SMBCHG: smbchg_otg_pulse_skip_disable: enabling pulse skip, reason 2
 [   19.954063 / 01-05 02:22:00.529][1] vote: name[SMBCHG: usb_suspend], client_id[1], state[0], val[0]
 [   19.954074 / 01-05 02:22:00.529][1] SMBCHG: usb_suspend: votes unchanged; skipping
 [   19.963409 / 01-05 02:22:00.539][0] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data4) register to IPA
 [   19.970775 / 01-05 02:22:00.549][1] msm_delete_command_ack_q: session_id = 4, stream_id = 0
 [   19.970796 / 01-05 02:22:00.549][1] msm_destroy_session: session_id = 4
 [   20.021362 / 01-05 02:22:00.599][1] RX msgq status HW:0x0, SW:2:
 [   20.024020 / 01-05 02:22:00.599][1] tasha_codec tasha_codec: tasha_swrm_clock: swrm clock users 0
 [   20.035826 / 01-05 02:22:00.609][2] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data5) register to IPA
 [   20.114920 / 01-05 02:22:00.689][0] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data6) register to IPA
 [   20.154212 / 01-05 02:22:00.729][3] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data7) register to IPA
 [   20.260248 / 01-05 02:22:00.839][2] pet_watchdog [enable : 1, jiffies : 4294939322, delay_time : 1000]
 [   20.308907 / 01-05 02:22:00.879][0] lge,blmap: br_lvl(85) -> bl_lvl(232)
 [   20.308922 / 01-05 02:22:00.879][0] mdss_fb_set_backlight: [AOD] Save unset_bl_level(232) in U3 mode. Will be updated when kick off function
 [   20.340097 / 01-05 02:22:00.919][0] mdss_fb_update_backlight: [Display] backlight sent to panel :232 in mdss_fb_update_backlight
 [   20.342331 / 01-05 02:22:00.919][0] qpnp_wled_module_en : wled module enable
 [   25.039214 / 01-04 18:22:06.169][3] RX msgq status HW:0x0, SW:2:
 [   25.598757 / 01-04 18:22:06.169][3] acc_open
 [   25.598782 / 01-04 18:22:06.169][3] acc_release
 [   26.013873 / 01-04 18:22:06.589][1] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 1, voltage = 3016 
 [   26.024532 / 01-04 18:22:06.599][1] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 0, voltage = 3016 
 [   26.050989 / 01-04 18:22:06.629][1] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 1, voltage = 3016 
 [   26.061642 / 01-04 18:22:06.639][1] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 0, voltage = 3016 
 [   26.088090 / 01-04 18:22:06.659][1] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 0, voltage = 3016 
 [   26.262524 / 01-04 18:22:06.839][0] 
 [   26.262524 / 01-04 18:22:06.839][0] Dongle Host Driver, version 1.78.5 (r)
 [   26.262524 / 01-04 18:22:06.839][0] Compiled in drivers/net/wireless/bcmdhd on 3.18.31-perf-g1b39075
 [   26.262545 / 01-04 18:22:06.839][0] wl_android_wifi_on in
 [   26.262553 / 01-04 18:22:06.839][0] wifi_platform_set_power = 1
 [   26.262596 / 01-04 18:22:06.839][0] [BRCM]: gpio_direction_output(1011,1)! ret = 0
 [   26.423589 / 01-04 18:22:06.999][2] bcm_wifi_set_power: wifi power successed to pull up
 [   26.423608 / 01-04 18:22:06.999][2] dhd_bus_devreset: == Power ON ==
 [   26.423657 / 01-04 18:22:06.999][2] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
 [   26.427324 / 01-04 18:22:06.999][0] msm_pcie_enable: PCIe RC0 PHY is ready!
 [   26.437874 / 01-04 18:22:07.009][0] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
 [   26.472849 / 01-04 18:22:07.049][0] msm_pcie_enable: PCIe RC0 link initialized
 [   26.473088 / 01-04 18:22:07.049][0] dhd_bus_devreset: dhdpcie_bus_clock_start OK
 [   26.474954 / 01-04 18:22:07.049][0] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
 [   26.475080 / 01-04 18:22:07.049][0] dhd_bus_download_firmware: firmware path=/system/etc/firmware/fw_bcmdhd.bin, nvram path=/system/etc/wifi/bcmdhd.cal
 [   26.475088 / 01-04 18:22:07.049][0] dhdpcie_ramsize_adj: Enter
 [   26.475235 / 01-04 18:22:07.049][0] dhd_os_open_image: /system/etc/firmware/fw_bcmdhd.bin (593765 bytes) open success
 [   26.478133 / 01-04 18:22:07.049][1] dhdpcie_download_code_file: download firmware /system/etc/firmware/fw_bcmdhd.bin
 [   26.478173 / 01-04 18:22:07.049][1] dhd_os_open_image: /system/etc/firmware/fw_bcmdhd.bin (593765 bytes) open success
 [   26.554270 / 01-04 18:22:07.129][1] dhd_os_open_image: /system/etc/wifi/bcmdhd.cal (6052 bytes) open success
 [   26.554530 / 01-04 18:22:07.129][1] dhdpcie_download_nvram: dhd_get_download_buffer len 6052
 [   26.554569 / 01-04 18:22:07.129][1] dhdpcie_download_nvram: process_nvram_vars len 3660
 [   26.575207 / 01-04 18:22:07.149][1] dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.
 [   26.576194 / 01-04 18:22:07.149][1] Failed to open the file logstrs.bin in dhd_init_logstrs_array, /vendor/firmware/logstrs.bin
 [   26.679093 / 01-04 18:22:07.249][1] PCIe shared addr (0x001df3ec) read took 96383 usec before dongle is ready
 [   26.679254 / 01-04 18:22:07.249][1] DMA RX offset from shared Area 0
 [   26.679262 / 01-04 18:22:07.249][1] dhdpcie_readshared: Dongle advertizes 4 size indices
 [   26.679374 / 01-04 18:22:07.249][1] ring_info_raw: 56 
 [   26.679380 / 01-04 18:22:07.249][1] 74 90 23 00 44 93 23 00 ec 93 23 00 94 94 23 00 
 [   26.679404 / 01-04 18:22:07.249][1] a0 94 23 00 00 00 00 00 00 00 00 00 00 00 00 00 
 [   26.679425 / 01-04 18:22:07.249][1] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
 [   26.679447 / 01-04 18:22:07.249][1] 00 00 00 00 2a 00 00 00 
 [   26.679460 / 01-04 18:22:07.249][1] dhdpcie_readshared: max H2D queues 42
 [   26.680756 / 01-04 18:22:07.259][2] dhdpcie_oob_intr_register OOB irq=337 flags=4 
 [   26.680847 / 01-04 18:22:07.259][2] dhd_bus_start: Initializing 42 h2drings
 [   26.680887 / 01-04 18:22:07.259][2] dhd_pktid_map_init:1354: pktid_audit init succeeded 3073
 [   26.682734 / 01-04 18:22:07.259][2] dhd_bus_cmn_writeshared:
 [   26.682744 / 01-04 18:22:07.259][2]   0000: 00 10 80 f6 00 00 00 00 
 [   26.682749 / 01-04 18:22:07.259][2] dhd_bus_cmn_writeshared:
 [   26.682763 / 01-04 18:22:07.259][2]   0000: 00 40 80 f6 00 00 00 00 
 [   26.683394 / 01-04 18:22:07.259][2] dhd_bus_cmn_writeshared:
 [   26.683817 / 01-04 18:22:07.259][2]   0000: 00 20 80 f6 00 00 00 00 
 [   26.683821 / 01-04 18:22:07.259][2] dhd_bus_cmn_writeshared:
 [   26.683835 / 01-04 18:22:07.259][2]   0000: 00 80 80 f6 00 00 00 00 
 [   26.683839 / 01-04 18:22:07.259][2] dhd_bus_cmn_writeshared:
 [   26.683910 / 01-04 18:22:07.259][2]   0000: 00 c0 80 f6 00 00 00 00 
 [   26.684272 / 01-04 18:22:07.259][2] dhd_bus_cmn_writeshared:
 [   26.684284 / 01-04 18:22:07.259][2]   0000: 00 30 80 f6 00 00 00 00 
 [   26.684287 / 01-04 18:22:07.259][2] dhd_bus_cmn_writeshared:
 [   26.684291 / 01-04 18:22:07.259][2]   0000: 08 00 00 00 
 [   26.684297 / 01-04 18:22:07.259][2] Attach flowrings pool for 40 rings
 [   26.686364 / 01-04 18:22:07.259][1] dhd_sync_with_dongle: GET_REVINFO device 0x43e9, vendor 0x14e4, chipnum 0x4358
 [   26.686377 / 01-04 18:22:07.259][1] Disable tdls_auto_op failed. -1
 [   26.686387 / 01-04 18:22:07.259][1] wifi_platform_get_mac_addr
 [   26.693484 / 01-04 18:22:07.269][0] Firmware up: op_mode=0x0005, MAC=00:90:4c:d6:84:0a
 [   26.733386 / 01-04 18:22:07.309][0] dhd_prot_ioctl: status ret value is -5 
 [   26.733402 / 01-04 18:22:07.309][0] dhd_preinit_ioctls Set lpc failed  -5
 [   26.736199 / 01-04 18:22:07.309][0] dhd_preinit_ioctls lpc fail WL_DOWN : 0, lpc = 1
 [   26.737921 / 01-04 18:22:07.309][0] dhd_preinit_ioctls Set lpc ret --> 0
 [   26.748296 / 01-04 18:22:07.319][1] dhd_prot_ioctl: status ret value is -23 
 [   26.748310 / 01-04 18:22:07.319][1] dhd_preinit_ioctls Set amsdu_aggsf to 4 failed -23
 [   26.758573 / 01-04 18:22:07.329][1] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
 [   26.759405 / 01-04 18:22:07.329][1] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
 [   26.760216 / 01-04 18:22:07.339][1] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
 [   26.761484 / 01-04 18:22:07.339][1] FUSE: SHORTCIRCUIT enabled [sdcard : 1699]!
 [   26.761769 / 01-04 18:22:07.339][1] FUSE: SHORTCIRCUIT enabled [sdcard : 1698]!
 [   26.761852 / 01-04 18:22:07.339][1] FUSE: SHORTCIRCUIT enabled [sdcard : 1697]!
 [   26.805266 / 01-04 18:22:07.379][0] Firmware version = wl0: Jul 11 2016 18:37:59 version 7.117.5 (A3 Station/P2P feature) FWID 01-8d25b326
 [   26.813894 / 01-04 18:22:07.389][0] dhd_prot_ioctl: status ret value is -14 
 [   26.814198 / 01-04 18:22:07.389][0] dhd_pno_init: Support Android Location Service
 [   26.827906 / 01-04 18:22:07.399][0] dhd_preinit_config : config path : /data/misc/wifi/config 
 [   26.827934 / 01-04 18:22:07.399][0] dhd_os_open_image: /data/misc/wifi/config is not regular file
 [   26.832799 / 01-04 18:22:07.409][0] dhd_bus_devreset: WLAN Power On Done
 [   26.961572 / 01-04 18:22:07.539][0] wl_create_event_handler(): thread:wl_event_handler:6c1 started
 [   26.976361 / 01-04 18:22:07.549][0] init: Starting service 'p2p_supplicant'...
 [   26.977558 / 01-04 18:22:07.549][0] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xffffffc033b98cf0
 [   27.311578 / 01-04 18:22:07.889][0] Random MAC OUI to be used - da:a1:19
 [   27.403441 / 01-04 18:22:07.979][1] msm_vidc: info: Opening video instance: 0000000000000000, 0
 [   27.414448 / 01-04 18:22:07.989][1] subsys-restart: __subsystem_get(): Changing subsys fw_name to venus
 [   27.440165 / 01-04 18:22:08.019][1] subsys-pil-tz ce0000.qcom,venus: venus: loading from 0x0000000091100000 to 0x0000000091600000
 [   27.443206 / 01-04 18:22:08.019][1] dhd_set_suspend: Remove extra suspend setting 
 [   27.547570 / 01-04 18:22:08.119][1] subsys-pil-tz ce0000.qcom,venus: venus: venus.mdt starting auth and reset
 [   27.606775 / 01-04 18:22:08.179][0] subsys-pil-tz ce0000.qcom,venus: venus: Brought out of reset
 [   27.692379 / 01-04 18:22:08.269][2] msm_vidc: info: Closed video instance: 0000000000000000
 [   27.697061 / 01-04 18:22:08.269][2] msm_vidc: info: Opening video instance: 0000000000000000, 0
 [   27.721676 / 01-04 18:22:08.299][1] msm_vidc: info: Closed video instance: 0000000000000000
 [   27.743708 / 01-04 18:22:08.319][0] msm_vidc: info: Opening video instance: 0000000000000000, 0
 [   27.757699 / 01-04 18:22:08.329][0] msm_vidc: info: Closed video instance: 0000000000000000
 [   27.762784 / 01-04 18:22:08.339][1] msm_vidc: info: Opening video instance: 0000000000000000, 0
 [   27.806338 / 01-04 18:22:08.379][2] msm_vidc: info: Closed video instance: 0000000000000000
 [   27.812469 / 01-04 18:22:08.389][2] msm_vidc: info: Opening video instance: 0000000000000000, 0
 [   27.858479 / 01-04 18:22:08.429][3] msm_vidc: info: Closed video instance: 0000000000000000
 [   27.866513 / 01-04 18:22:08.439][3] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   27.901789 / 01-04 18:22:08.479][2] msm_vidc: info: Closed video instance: 0000000000000000
 [   27.906039 / 01-04 18:22:08.479][3] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   27.948107 / 01-04 18:22:08.519][3] msm_vidc: info: Closed video instance: 0000000000000000
 [   27.956893 / 01-04 18:22:08.529][2] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   27.975968 / 01-04 18:22:08.549][2] msm_vidc: info: Closed video instance: 0000000000000000
 [   27.980000 / 01-04 18:22:08.549][3] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   27.999774 / 01-04 18:22:08.569][0] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.007379 / 01-04 18:22:08.579][0] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.018148 / 01-04 18:22:08.589][0] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.023556 / 01-04 18:22:08.599][0] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.045037 / 01-04 18:22:08.619][0] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.054020 / 01-04 18:22:08.629][1] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.070669 / 01-04 18:22:08.649][3] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.076363 / 01-04 18:22:08.649][3] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.096790 / 01-04 18:22:08.669][3] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.102005 / 01-04 18:22:08.679][1] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.121449 / 01-04 18:22:08.699][0] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.125594 / 01-04 18:22:08.699][3] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.164789 / 01-04 18:22:08.739][1] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.169584 / 01-04 18:22:08.739][1] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.187578 / 01-04 18:22:08.759][0] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.192749 / 01-04 18:22:08.769][0] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.204444 / 01-04 18:22:08.779][1] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.212115 / 01-04 18:22:08.789][1] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.244431 / 01-04 18:22:08.819][0] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.249564 / 01-04 18:22:08.819][1] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.270082 / 01-04 18:22:08.849][0] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.286756 / 01-04 18:22:08.859][1] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.306137 / 01-04 18:22:08.879][1] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.318533 / 01-04 18:22:08.889][1] msm_vidc: info: Opening video instance: 0000000000000000, 1
 [   28.332195 / 01-04 18:22:08.909][1] msm_vidc: info: Closed video instance: 0000000000000000
 [   28.726544 / 01-04 18:22:09.299][1] [CCAudit] do_sys_open error=-13 file=/data/dalvik-cache/arm64/system@[email protected]@classes.dex flag=131650 proc=m.android.phone parent=main
 [   28.955133 / 01-04 18:22:09.529][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   30.280107 / 01-04 18:22:10.859][3] pet_watchdog [enable : 1, jiffies : 4294940324, delay_time : 1000]
 [   30.317696 / 01-04 18:22:10.889][0] [CCAudit] do_sys_open error=-13 file=/proc/self/task/2260/comm flag=655361 proc=netmgrd parent=init
 [   30.598877 / 01-04 18:22:11.169][3] init: avc:  granted  { set } for property=net.lte.ims.data.enabled pid=1955 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
 [   30.960098 / 01-04 18:22:11.539][2] Calling earjack_debugger_set_uart
 [   31.673754 / 12-27 17:05:03.381][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   31.673795 / 12-27 17:05:03.381][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   31.766086 / 12-27 17:05:03.471][1] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 988
 [   32.088861 / 12-27 17:05:03.791][1] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
 [   32.088874 / 12-27 17:05:03.791][1] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[500], PMI_IUSB[1700], SMB_IUSB[0]
 [   32.088882 / 12-27 17:05:03.791][1] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
 [   32.088889 / 12-27 17:05:03.791][1] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[4835]
 [   32.088897 / 12-27 17:05:03.791][1] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[98], BATT_VOL[4175], BATT_TEMP[291], BATT_CUR[652767]
 [   32.088906 / 12-27 17:05:03.791][1] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[CHARGING/500MA/NONE], SAFTY_STATE[Set/Not yet]
 [   32.088913 / 12-27 17:05:03.791][1] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[42], PA_THERM[32], BOARD_THERM[30] VTS[355]
 [   32.122796 / 12-27 17:05:03.831][0] [CCAudit] do_sys_open error=-13 file=/proc/self/task/2341/comm flag=655361 proc=netmgrd parent=init
 [   32.123545 / 12-27 17:05:03.831][2] [CCAudit] do_sys_open error=-13 file=/proc/self/task/2342/comm flag=655361 proc=netmgrd parent=init
 [   32.128192 / 12-27 17:05:03.831][3] [LGE_DATA] enhance ePDG PDN  connection time !
 [   32.159736 / 12-27 17:05:03.861][1] IPC_RTR: msm_ipc_router_send_to: permission failure for dpmd
 [   32.159754 / 12-27 17:05:03.861][1] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
 [   32.159887 / 12-27 17:05:03.861][1] IPC_RTR: msm_ipc_router_send_to: permission failure for dpmd
 [   32.159898 / 12-27 17:05:03.861][1] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
 [   32.159978 / 12-27 17:05:03.861][1] IPC_RTR: msm_ipc_router_send_to: permission failure for dpmd
 [   32.159988 / 12-27 17:05:03.861][1] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
 [   32.190452 / 12-27 17:05:03.901][2] init: Service 'bootanim' (pid 796) exited with status 0
 [   32.221481 / 12-27 17:05:03.931][2] NOHZ: local_softirq_pending 08
 [   32.221857 / 12-27 17:05:03.931][3] [LGE_DATA] enhance ePDG PDN  connection time !
 [   32.221890 / 12-27 17:05:03.931][3] now = 4294940518, schedule = 4294952591, rounded schedule = 4294952691 => 4294952591
 [   32.314337 / 12-27 17:05:04.021][1] [hl_mode] hl_mode off
 [   32.320548 / 12-27 17:05:04.031][3] IPC_RTR: msm_ipc_router_send_to: permission failure for dpmd
 [   32.320563 / 12-27 17:05:04.031][3] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
 [   32.320637 / 12-27 17:05:04.031][3] IPC_RTR: msm_ipc_router_send_to: permission failure for dpmd
 [   32.320645 / 12-27 17:05:04.031][3] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
 [   32.320693 / 12-27 17:05:04.031][3] IPC_RTR: msm_ipc_router_send_to: permission failure for dpmd
 [   32.320699 / 12-27 17:05:04.031][3] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
 [   32.332644 / 12-27 17:05:04.041][1] init: write_file: Unable to open '/sys/devices/virtual/lg_rgb_led/use_patterns/setting': No such file or directory
 [   32.332853 / 12-27 17:05:04.041][1] Boot completed init: write_file: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
 [   32.333253 / 12-27 17:05:04.041][1] init: cannot find '/system/bin/eut_init' (No such file or directory), disabling 'eut-init-service'
 [   32.333713 / 12-27 17:05:04.041][1] msm_thermal:store_cc_enabled Core control disabled
 [   32.334073 / 12-27 17:05:04.041][1] mode_store: bcl disabled
 [   32.334365 / 12-27 17:05:04.041][1] hotplug_mask_store: bcl hotplug mask updated to 0
 [   32.334414 / 12-27 17:05:04.041][1] hotplug_soc_mask_store: bcl soc hotplug mask updated to 0
 [   32.335382 / 12-27 17:05:04.041][1] mode_store: bcl enabled
 [   32.338342 / 12-27 17:05:04.041][1] msm_thermal:store_cc_enabled Core control enabled
 [   32.338431 / 12-27 17:05:04.041][1] msm_thermal:update_offline_cores Offlined CPU mask changed 0 to 0
 [   32.338931 / 12-27 17:05:04.041][1] mode_store: bcl disabled
 [   32.338983 / 12-27 17:05:04.041][1] hotplug_mask_store: bcl hotplug mask updated to 12
 [   32.339016 / 12-27 17:05:04.041][1] hotplug_soc_mask_store: bcl soc hotplug mask updated to 8
 [   32.339061 / 12-27 17:05:04.041][1] power_supply_callback: BCL state of SoC is 1
 [   32.339211 / 12-27 17:05:04.041][1] msm_thermal:hotplug_notify tsens_tz_sensor4 reach temp threshold: 649, cpu_bit:1, offline:0, trip_type:5
 [   32.339219 / 12-27 17:05:04.041][1] msm_thermal:hotplug_notify 1 already onlined.
 [   32.339872 / 12-27 17:05:04.041][1] mode_store: bcl enabled
 [   32.340209 / 12-27 17:05:04.051][1] init: write_file: Unable to write to '/proc/sys/kernel/sched_downmigrate': Invalid argument
 [   32.352360 / 12-27 17:05:04.061][1] init: Starting service 'perfd'...
 [   32.352414 / 12-27 17:05:04.061][3] [hl_mode] hl_mode off
 [   32.354293 / 12-27 17:05:04.061][1] init: Starting service 'iop'...
 [   32.355450 / 12-27 17:05:04.061][1] init: write_file: Unable to open '/sys/block/mmcblk0/queue/scheduler': No such file or directory
 [   32.355542 / 12-27 17:05:04.061][1] init: write_file: Unable to open '/sys/block/mmcblk1/queue/scheduler': No such file or directory
 [   32.355701 / 12-27 17:05:04.061][1] init: write_file: Unable to open '/sys/block/dm-0/queue/scheduler': No such file or directory
 [   32.355736 / 12-27 17:05:04.061][1] init: write_file: Unable to open '/sys/block/mmcblk0/queue/iosched/slice_idle': No such file or directory
 [   32.355768 / 12-27 17:05:04.061][1] init: write_file: Unable to open '/sys/block/mmcblk1/queue/iosched/slice_idle': No such file or directory
 [   32.356166 / 12-27 17:05:04.061][3] [hl_mode] hl_mode off
 [   32.356664 / 12-27 17:05:04.061][0] init: write_file: Unable to open '/sys/block/dm-0/queue/iosched/slice_idle': No such file or directory
 [   32.358468 / 12-27 17:05:04.061][3] [hl_mode] hl_mode off
 [   32.422320 / 12-27 17:05:04.131][2] msm_thermal:hotplug_notify tsens_tz_sensor9 reach temp threshold: 649, cpu_bit:4, offline:0, trip_type:5
 [   32.422336 / 12-27 17:05:04.131][2] msm_thermal:hotplug_notify 4 already onlined.
 [   32.439031 / 12-27 17:05:04.141][3] msm_thermal:hotplug_notify tsens_tz_sensor11 reach temp threshold: 649, cpu_bit:8, offline:0, trip_type:5
 [   32.439043 / 12-27 17:05:04.141][3] msm_thermal:hotplug_notify 8 already onlined.
 [   32.510571 / 12-27 17:05:04.221][1] lge,blmap: br_lvl(86) -> bl_lvl(238)
 [   32.527105 / 12-27 17:05:04.231][3] lge,blmap: br_lvl(90) -> bl_lvl(264)
 [   32.543632 / 12-27 17:05:04.251][3] lge,blmap: br_lvl(93) -> bl_lvl(284)
 [   32.556952 / 12-27 17:05:04.261][1] devbw soc:qcom,cpubw: dev_pm_opp_get_opp_count: device OPP not found (-19)
 [   32.560706 / 12-27 17:05:04.271][3] lge,blmap: br_lvl(96) -> bl_lvl(303)
 [   32.576937 / 12-27 17:05:04.281][3] lge,blmap: br_lvl(100) -> bl_lvl(333)
 [   32.593608 / 12-27 17:05:04.301][0] lge,blmap: br_lvl(103) -> bl_lvl(356)
 [   32.610326 / 12-27 17:05:04.321][0] lge,blmap: br_lvl(106) -> bl_lvl(379)
 [   32.626943 / 12-27 17:05:04.331][0] lge,blmap: br_lvl(110) -> bl_lvl(411)
 [   32.643747 / 12-27 17:05:04.351][1] lge,blmap: br_lvl(113) -> bl_lvl(436)
 [   32.663885 / 12-27 17:05:04.371][0] lge,blmap: br_lvl(116) -> bl_lvl(462)
 [   32.674785 / 12-27 17:05:04.381][3] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
 [   32.695988 / 12-27 17:05:04.401][2] lge,blmap: br_lvl(120) -> bl_lvl(496)
 [   32.712687 / 12-27 17:05:04.421][3] lge,blmap: br_lvl(122) -> bl_lvl(514)
 [   33.323274 / 12-27 17:05:05.031][0] HTB: quantum of class 10001 is big. Consider r2q change.
 [   33.344431 / 12-27 17:05:05.051][2] HTB: quantum of class 10010 is big. Consider r2q change.
 [   33.376744 / 12-27 17:05:05.081][2] now = 4294940633, schedule = 4294952694, rounded schedule = 4294952794 => 4294952694
 [   33.429791 / 12-27 17:05:05.131][3] [LGE_DATA] enhance ePDG PDN  connection time !
 [   33.429833 / 12-27 17:05:05.131][3] now = 4294940638, schedule = 4294952691, rounded schedule = 4294952791 => 4294952691
 [   33.432056 / 12-27 17:05:05.141][3] IPC_RTR: msm_ipc_router_send_to: permission failure for dpmd
 [   33.432071 / 12-27 17:05:05.141][3] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
 [   33.432139 / 12-27 17:05:05.141][3] IPC_RTR: msm_ipc_router_send_to: permission failure for dpmd
 [   33.432208 / 12-27 17:05:05.141][3] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
 [   33.713628 / 12-27 17:05:05.421][3] [CCAudit] do_sys_open error=-13 file=/sys/kernel/ipv4/tcp_delack_seg flag=131649 proc=ConnectivitySer parent=main
 [   34.010465 / 12-27 17:05:05.721][3] now = 4294940697, schedule = 4294952791, rounded schedule = 4294952891 => 4294952791
 [   34.276756 / 12-27 17:05:05.981][3] NOHZ: local_softirq_pending 08
 [   34.488803 / 12-27 17:05:06.191][1] ------------[ cut here ]------------
 [   34.488834 / 12-27 17:05:06.191][1] WARNING: CPU: 1 PID: 967 at ../../../../../../kernel/lge/msm8996/net/sched/sch_api.c:1197 tc_qdisc_flow_control+0x140/0x170()
 [   34.488843 / 12-27 17:05:06.191][1] tc_qdisc_flow_control(): called on bad queue
 [   34.488848 / 12-27 17:05:06.191][1] Modules linked in:
 [   34.488862 / 12-27 17:05:06.191][1] CPU: 1 PID: 967 Comm: netmgrd Not tainted 3.18.31-perf-g1b39075 #1
 [   34.488869 / 12-27 17:05:06.191][1] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
 [   34.488876 / 12-27 17:05:06.191][1] Call trace:
 [   34.488889 / 12-27 17:05:06.191][1] [<ffffffc000089878>] dump_backtrace+0x0/0x23c
 [   34.488897 / 12-27 17:05:06.191][1] [<ffffffc000089ac8>] show_stack+0x14/0x1c
 [   34.488908 / 12-27 17:05:06.191][1] [<ffffffc000ce4980>] dump_stack+0x88/0xac
 [   34.488917 / 12-27 17:05:06.191][1] [<ffffffc0000a2150>] warn_slowpath_common+0x8c/0xb0
 [   34.488924 / 12-27 17:05:06.191][1] [<ffffffc0000a21c4>] warn_slowpath_fmt+0x50/0x58
 [   34.488931 / 12-27 17:05:06.191][1] [<ffffffc000b41938>] tc_qdisc_flow_control+0x140/0x170
 [   34.488937 / 12-27 17:05:06.191][1] [<ffffffc000cd8b9c>] rmnet_vnd_ioctl+0x230/0x5f4
 [   34.488946 / 12-27 17:05:06.191][1] [<ffffffc000b34460>] dev_ifsioc+0x2a0/0x2b8
 [   34.488952 / 12-27 17:05:06.191][1] [<ffffffc000b34b54>] dev_ioctl+0x64c/0x6b4
 [   34.488960 / 12-27 17:05:06.191][1] [<ffffffc000b05604>] sock_ioctl+0x40/0x29c
 [   34.488969 / 12-27 17:05:06.191][1] [<ffffffc0001a4f10>] do_vfs_ioctl+0x4bc/0x59c
 [   34.488975 / 12-27 17:05:06.191][1] [<ffffffc0001a5050>] SyS_ioctl+0x60/0x88
 [   34.488981 / 12-27 17:05:06.191][1] ---[ end trace 80bf8788ea200f2d ]---
 [   34.498492 / 12-27 17:05:06.201][1] [CCAudit] do_sys_open error=-13 file=/sys/kernel/ipv4/tcp_delack_seg flag=131649 proc=ConnectivitySer parent=main
 [   35.644045 / 12-27 17:05:07.351][1] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=2
 [   35.715014 / 12-27 17:05:07.421][2] [hl_mode] hl_mode off
 [   35.733688 / 12-27 17:05:07.441][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   35.733715 / 12-27 17:05:07.441][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   35.735613 / 12-27 17:05:07.441][1] dhd_prot_ioctl: status ret value is -17 
 [   35.768272 / 12-27 17:05:07.471][2] CFG80211-INFO2) wl_cfg80211_connect : Connecting withc8:d7:19:ef:c8:7b channel (6) ssid "Filetto_Home_WiFi", len (17)
 [   35.768272 / 12-27 17:05:07.471][2] 
 [   35.844219 / 12-27 17:05:07.551][2] wl_bss_connect_done succeeded with c8:d7:19:ef:c8:7b
 [   35.856634 / 12-27 17:05:07.561][2] dhd_prot_ioctl: SET PM to 0
 [   35.858344 / 12-27 17:05:07.561][2] dhd_prot_flow_ring_create: Send Flow Create Req flow ID 41 for peer c8:d7:19:ef:c8:7b prio 0 ifindex 0
 [   35.858796 / 12-27 17:05:07.561][0] dhd_prot_flow_ring_create_response_process: Flow Create Response status = 0 Flow 41
 [   35.940341 / 12-27 17:05:07.651][2] wl_bss_connect_done succeeded with c8:d7:19:ef:c8:7b
 [   36.081309 / 12-27 17:05:07.791][0] mtp_open
 [   36.887800 / 12-27 17:05:08.591][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   36.898602 / 12-27 17:05:08.601][0] dhd_prot_ioctl: SET PM to 2
 [   36.902352 / 12-27 17:05:08.611][2] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP is complete 
 [   36.942408 / 12-27 17:05:08.651][2] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP session starts
 [   37.024527 / 12-27 17:05:08.731][0] dhd_set_suspend: Remove extra suspend setting 
 [   37.033136 / 12-27 17:05:08.741][1] dhd_prot_ioctl: SET PM to 0
 [   37.039737 / 12-27 17:05:08.741][3] NOHZ: local_softirq_pending 08
 [   37.039959 / 12-27 17:05:08.741][3] NOHZ: local_softirq_pending 08
 [   37.040329 / 12-27 17:05:08.751][3] now = 4294941000, schedule = 4294953091, rounded schedule = 4294953191 => 4294953091
 [   37.916721 / 12-27 17:05:09.621][3] NOHZ: local_softirq_pending 08
 [   38.430514 / 12-27 17:05:10.141][2] [CCAudit] chmod_common error=-1 file=app_chimera flag=0 proc=.android.chrome parent=main
 [   38.467017 / 12-27 17:05:10.171][3] [CCAudit] chmod_common error=-1 file=app_chimera flag=0 proc=.android.chrome parent=main
 [   38.483775 / 12-27 17:05:10.191][1] [CCAudit] do_sys_open error=-13 file=/data/dalvik-cache/arm/data@[email protected]@app_chimera@m@00000001@[email protected] flag=131650 proc=.android.chrome parent=main
 [   38.831969 / 12-27 17:05:10.541][3] binder: 1238:1626 transaction failed 29189, size 348-0
 [   39.103997 / 12-27 17:05:10.811][1] NOHZ: local_softirq_pending 08
 [   39.104076 / 12-27 17:05:10.811][1] NOHZ: local_softirq_pending 08
 [   39.146308 / 12-27 17:05:10.851][1] NOHZ: local_softirq_pending 08
 [   39.257341 / 12-27 17:05:10.961][2] NOHZ: local_softirq_pending 08
 [   39.299225 / 12-27 17:05:11.001][1] dhd_prot_ioctl: SET PM to 2
 [   39.307305 / 12-27 17:05:11.011][2] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP is complete 
 [   39.567204 / 12-27 17:05:11.271][2] [CCAudit] do_sys_open error=-13 file=/sys/kernel/ipv4/tcp_delack_seg flag=131649 proc=ConnectivitySer parent=main
 [   40.300160 / 12-27 17:05:12.011][3] pet_watchdog [enable : 1, jiffies : 4294941326, delay_time : 1000]
 [   41.036446 / 12-27 17:05:12.741][2] lge,blmap: br_lvl(119) -> bl_lvl(487)
 [   41.052450 / 12-27 17:05:12.761][2] lge,blmap: br_lvl(116) -> bl_lvl(462)
 [   41.073192 / 12-27 17:05:12.781][2] lge,blmap: br_lvl(112) -> bl_lvl(428)
 [   41.085782 / 12-27 17:05:12.791][2] lge,blmap: br_lvl(109) -> bl_lvl(402)
 [   41.106502 / 12-27 17:05:12.811][2] lge,blmap: br_lvl(105) -> bl_lvl(371)
 [   41.123596 / 12-27 17:05:12.831][1] lge,blmap: br_lvl(103) -> bl_lvl(356)
 [   41.136081 / 12-27 17:05:12.841][1] lge,blmap: br_lvl(99) -> bl_lvl(326)
 [   41.156621 / 12-27 17:05:12.861][1] lge,blmap: br_lvl(95) -> bl_lvl(297)
 [   41.169494 / 12-27 17:05:12.871][0] lge,blmap: br_lvl(93) -> bl_lvl(284)
 [   41.189695 / 12-27 17:05:12.891][0] lge,blmap: br_lvl(89) -> bl_lvl(258)
 [   41.206799 / 12-27 17:05:12.911][0] lge,blmap: br_lvl(85) -> bl_lvl(232)
 [   41.223173 / 12-27 17:05:12.931][0] lge,blmap: br_lvl(82) -> bl_lvl(215)
 [   41.240413 / 12-27 17:05:12.951][0] lge,blmap: br_lvl(79) -> bl_lvl(199)
 [   41.256405 / 12-27 17:05:12.961][0] lge,blmap: br_lvl(75) -> bl_lvl(178)
 [   41.273742 / 12-27 17:05:12.981][0] lge,blmap: br_lvl(72) -> bl_lvl(162)
 [   41.290906 / 12-27 17:05:13.001][0] lge,blmap: br_lvl(69) -> bl_lvl(148)
 [   41.307281 / 12-27 17:05:13.011][0] lge,blmap: br_lvl(65) -> bl_lvl(130)
 [   41.315804 / 12-27 17:05:13.021][2] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 1, voltage = 3016 
 [   41.323571 / 12-27 17:05:13.031][0] lge,blmap: br_lvl(62) -> bl_lvl(116)
 [   41.326472 / 12-27 17:05:13.031][2] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 1, voltage = 2088 
 [   41.339628 / 12-27 17:05:13.041][0] lge,blmap: br_lvl(59) -> bl_lvl(105)
 [   41.356293 / 12-27 17:05:13.061][0] lge,blmap: br_lvl(55) -> bl_lvl(92)
 [   41.373678 / 12-27 17:05:13.081][0] lge,blmap: br_lvl(52) -> bl_lvl(83)
 [   41.389777 / 12-27 17:05:13.091][0] lge,blmap: br_lvl(49) -> bl_lvl(73)
 [   41.419172 / 12-27 17:05:13.121][0] lge,blmap: br_lvl(45) -> bl_lvl(66)
 [   41.423465 / 12-27 17:05:13.131][0] lge,blmap: br_lvl(42) -> bl_lvl(60)
 [   41.439818 / 12-27 17:05:13.141][0] lge,blmap: br_lvl(39) -> bl_lvl(54)
 [   41.456325 / 12-27 17:05:13.161][0] lge,blmap: br_lvl(35) -> bl_lvl(47)
 [   41.473086 / 12-27 17:05:13.181][0] lge,blmap: br_lvl(32) -> bl_lvl(43)
 [   41.493425 / 12-27 17:05:13.201][0] lge,blmap: br_lvl(29) -> bl_lvl(40)
 [   41.506967 / 12-27 17:05:13.211][0] lge,blmap: br_lvl(25) -> bl_lvl(35)
 [   41.524830 / 12-27 17:05:13.231][0] lge,blmap: br_lvl(22) -> bl_lvl(32)
 [   41.542325 / 12-27 17:05:13.251][0] lge,blmap: br_lvl(19) -> bl_lvl(31)
 [   41.556681 / 12-27 17:05:13.261][0] lge,blmap: br_lvl(15) -> bl_lvl(30)
 [   41.558384 / 12-27 17:05:13.281][1] RX msgq status HW:0x0, SW:2:
 [   41.573884 / 12-27 17:05:13.281][1] lge,blmap: br_lvl(12) -> bl_lvl(29)
 [   41.574366 / 12-27 17:05:13.281][1] tasha_codec tasha_codec: tasha_swrm_clock: swrm clock users 1
 [   41.592394 / 12-27 17:05:13.301][3] lge,blmap: br_lvl(9) -> bl_lvl(29)
 [   41.607407 / 12-27 17:05:13.311][0] lge,blmap: br_lvl(6) -> bl_lvl(29)
 [   41.665827 / 12-27 17:05:13.371][2] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 0, voltage = 3016 
 [   41.916079 / 12-27 17:05:13.621][2] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 1, voltage = 3016 
 [   41.927002 / 12-27 17:05:13.631][2] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 1, voltage = 2088 
 [   42.164446 / 12-27 17:05:13.871][3] type=1400 audit(1482887113.871:7): avc: denied { read } for pid=3916 comm="Binder:3901_2" name="/" dev="tmpfs" ino=15325 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=1
 [   42.164738 / 12-27 17:05:13.871][3] type=1400 audit(1482887113.871:8): avc: denied { open } for pid=3916 comm="Binder:3901_2" path="/dev" dev="tmpfs" ino=15325 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=1
 [   42.266037 / 12-27 17:05:13.971][2] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 0, voltage = 3016 
 [   42.443931 / 12-27 17:05:14.151][1] [CCAudit] do_sys_open error=-13 file=/sys/kernel/debug/tracing/trace_marker flag=655361 proc=dex2oat parent=Binder:3901_2
 [   43.546026 / 12-27 17:05:15.251][0] lge,blmap: br_lvl(0) -> bl_lvl(0)
 [   43.547231 / 12-27 17:05:15.251][0] qpnp_wled_module_en : wled module disable
 [   43.560587 / 12-27 17:05:15.271][0] msm_thermal:update_cpu_freq [CPU2] : max freq = 2073600
 [   43.569574 / 12-27 17:05:15.271][2] [hl_mode] hl_mode off
 [   43.569790 / 12-27 17:05:15.271][1] __validate_and_set_roi: [AOD] Skip AOD area. is_black_frame : 1, mfd->panel_info->aod_cur_mode : 3
 [   43.571315 / 12-27 17:05:15.281][3] msm_thermal:update_cpu_freq [CPU2] : max freq = 2150400
 [   43.586769 / 12-27 17:05:15.291][0] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xd4/0xe4 mode:4
 [   43.586775 / 12-27 17:05:15.291][0] [AOD][START]cur_mode : 3, blank mode : 4, aod_node : 0, keep_aod : 3
 [   43.586778 / 12-27 17:05:15.291][0] [AOD][END] cmd_status : 4, next_mode : 0 labibb_ctrl : ctrl
 [   43.604041 / 12-27 17:05:15.311][3] [Display] mdss_dsi_panel_off: ctrl=ffffffc076232018 ndx=0
 [   43.694342 / 12-27 17:05:15.401][2] [Touch] LCD_EVENT_LCD_MODE!
 [   43.694345 / 12-27 17:05:15.401][2] [Touch] lcd_mode: 0 (prev: 3)
 [   43.694346 / 12-27 17:05:15.401][2] [Touch] U0 mode change
 [   43.694348 / 12-27 17:05:15.401][2] [Touch] touch_suspend Start
 [   43.694353 / 12-27 17:05:15.401][2] [Touch] sw49407_suspend : touch_suspend start
 [   43.694354 / 12-27 17:05:15.401][2] [Touch] Skip lpwg_mode
 [   43.695287 / 12-27 17:05:15.401][2] [Touch] touch_suspend End
 [   43.695289 / 12-27 17:05:15.401][2] [Display] mdss_dsi_panel_off:-
 [   43.696120 / 12-27 17:05:15.401][2] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=1 req_power_state=0
 [   43.696456 / 12-27 17:05:15.401][2] [Display] mdss_dsi_off-:
 [   43.702110 / 12-27 17:05:15.411][2] mdss_fb_blank_sub: mdss_fb_blank_sub: -
 [   43.702117 / 12-27 17:05:15.411][2] [Touch] FB_BLANK
 [   43.704339 / 12-27 17:05:15.411][2] hdmi_tx_event_handler: event = MDSS_EVENT_SUSPEND suspend=0, hpd_feature=0
 [   43.752833 / 12-27 17:05:15.461][1] dhd_set_suspend: Remove extra suspend setting 
 [   43.846745 / 12-27 17:05:15.551][2] [Touch] LPWG_UPDATE_ALL: mode[1], screen[ON], sensor[FAR], qcover[OPEN]
 [   43.846756 / 12-27 17:05:15.551][2] [Touch] Skip lpwg_mode
 [   43.882134 / 12-27 17:05:15.591][2] dhd_set_suspend: force extra Suspend setting 
 [   43.892914 / 12-27 17:05:15.601][2] dhd_get_suspend_bcn_li_dtim beacon=100 bcn_li_dtim=3 DTIM=1 Listen=10
 [   43.930855 / 12-27 17:05:15.641][0] [Touch] sw49407_clear_q_sensitivity : NORMAL(0)
 [   43.930870 / 12-27 17:05:15.641][0] [Touch] LPWG_UPDATE_ALL: mode[1], screen[OFF], sensor[FAR], qcover[OPEN]
 [   43.931532 / 12-27 17:05:15.641][3] [Touch] LPWG Active Area - NORMAL
 [   43.931545 / 12-27 17:05:15.641][3] [Touch] TCI1-type:4
 [   43.932551 / 12-27 17:05:15.641][3] [Touch] sw49407_lpwg_control mode = 1
 [   43.932694 / 12-27 17:05:15.641][3] [Touch] swipe disable
 [   43.932701 / 12-27 17:05:15.641][3] [Touch] sw49407_tc_driving = 0, 1
 [   43.932842 / 12-27 17:05:15.641][3] [Touch] DDI Display Mode = 0
 [   43.933093 / 12-27 17:05:15.641][3] [Touch] Reset Cnt : 29
 [   44.048644 / 12-27 17:05:15.751][0] type=1400 audit(1482887115.751:9): avc: denied { read } for pid=3915 comm="Binder:3901_1" name="/" dev="tmpfs" ino=15325 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=1
 [   44.049162 / 12-27 17:05:15.751][0] type=1400 audit(1482887115.751:10): avc: denied { open } for pid=3915 comm="Binder:3901_1" path="/dev" dev="tmpfs" ino=15325 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=1
 [   44.167273 / 12-27 17:05:15.871][3] [Touch] TC_Driving OK
 [   44.579619 / 12-27 17:05:16.281][0] qpnp_pon_input_dispatch: code(116), value(1)
 [   44.590222 / 12-27 17:05:16.301][2] dhd_set_suspend: Remove extra suspend setting 
 [   44.595732 / 12-27 17:05:16.301][2] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xd4/0xe4 mode:0
 [   44.595737 / 12-27 17:05:16.301][2] [AOD][START]cur_mode : 0, blank mode : 0, aod_node : 0, keep_aod : 3
 [   44.595739 / 12-27 17:05:16.301][2] [AOD][END] cmd_status : 0, next_mode : 3 labibb_ctrl : ctrl
 [   44.598445 / 12-27 17:05:16.301][2] hdmi_tx_event_handler: event = MDSS_EVENT_RESUME suspend=0, hpd_feature=0
 [   44.605100 / 12-27 17:05:16.311][2] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
 [   44.612088 / 12-27 17:05:16.321][0] [Touch] NOTIFY_TOUCH_RESET! return = 0
 [   44.612513 / 12-27 17:05:16.321][0] [Touch] ext_watch_get_current_time : Display[12:00:42], RTC[12:00:43]
 [   44.636750 / 12-27 17:05:16.341][3] [Touch] LPWG_UPDATE_ALL: mode[1], screen[ON], sensor[FAR], qcover[OPEN]
 [   44.636753 / 12-27 17:05:16.341][3] [Touch] Not Ready, Need IC init
 [   44.643087 / 12-27 17:05:16.351][1] [Display] mdss_dsi_on-:
 [   44.645080 / 12-27 17:05:16.351][1] [Display] mdss_dsi_panel_on: ndx=0
 [   44.650149 / 12-27 17:05:16.361][2] [Display]lge_change_reader_mode: reader_mode_step4 or off 
 [   44.650445 / 12-27 17:05:16.361][2] [Display]lge_change_reader_mode: image enhance on
 [   44.694021 / 12-27 17:05:16.401][0] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 1, voltage = 3016 
 [   44.704647 / 12-27 17:05:16.411][0] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 1, voltage = 2088 
 [   44.718882 / 12-27 17:05:16.421][0] qpnp_pon_input_dispatch: code(116), value(0)
 [   44.723903 / 12-27 17:05:16.431][0] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 0, voltage = 3016 
 [   44.751769 / 12-27 17:05:16.461][3] [Touch] LCD_EVENT_LCD_MODE!
 [   44.751772 / 12-27 17:05:16.461][3] [Touch] lcd_mode: 3 (prev: 0)
 [   44.751775 / 12-27 17:05:16.461][3] [Touch] touch_resume Start
 [   44.751777 / 12-27 17:05:16.461][3] [Touch] touch_resume End
 [   44.751786 / 12-27 17:05:16.461][3] [Display] mdss_dsi_panel_on:-
 [   44.751793 / 12-27 17:05:16.461][0] [Touch] touch_ic_init Start
 [   44.751798 / 12-27 17:05:16.461][0] [Touch] sw49407_init: charger_state = 0x01
 [   44.752069 / 12-27 17:05:16.461][0] [Touch] info ptr addr read : 0026425C
 [   44.752308 / 12-27 17:05:16.461][0] [Touch] tc status read : 0F7000C0
 [   44.752310 / 12-27 17:05:16.461][0] [Touch] ========== Info ADDR ==========
 [   44.752312 / 12-27 17:05:16.461][0] [Touch] chip_info_addr        : 025C
 [   44.752314 / 12-27 17:05:16.461][0] [Touch] reg_info_addr         : 0264
 [   44.752315 / 12-27 17:05:16.461][0] [Touch] ========== Info ADDR ==========
 [   44.752316 / 12-27 17:05:16.461][0] [Touch] Model ID is loaded
 [   44.752318 / 12-27 17:05:16.461][0] [Touch] Production Test info checksum is ok
 [   44.754131 / 12-27 17:05:16.461][0] [Touch] ==Print PT info Data==
 [   44.754138 / 12-27 17:05:16.461][0] [Touch] version : v1.07, chip : 9, protocol : 4
 [   44.754138 / 12-27 17:05:16.461][0] [Touch] 
 [   44.754138 / 12-27 17:05:16.461][0] [Touch] fpc : 2, lcm : 4, lot : 9
 [   44.754138 / 12-27 17:05:16.461][0] [Touch] product id : L1L57P1
 [   44.754138 / 12-27 17:05:16.461][0] [Touch] flash boot : idle, done, crc : ok
 [   44.754140 / 12-27 17:05:16.461][0] [Touch] ==Print Config Header Data==
 [   44.754142 / 12-27 17:05:16.461][0] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
 [   44.755557 / 12-27 17:05:16.461][0] [Touch] resume ts->lpwg.screen on
 [   44.755735 / 12-27 17:05:16.461][0] [Touch] sw49407_lpwg_control mode = 0
 [   44.755818 / 12-27 17:05:16.461][3] mdss_fb_blank_sub: mdss_fb_blank_sub: -
 [   44.755827 / 12-27 17:05:16.461][3] [Touch] FB_UNBLANK
 [   44.755924 / 12-27 17:05:16.461][0] [Touch] swipe disable
 [   44.755929 / 12-27 17:05:16.461][0] [Touch] sw49407_tc_driving = 3, 185
 [   44.756223 / 12-27 17:05:16.461][0] [Touch] DDI Display Mode = 3
 [   44.756863 / 12-27 17:05:16.461][0] [Touch] Reset Cnt : 30
 [   44.775189 / 12-27 17:05:16.481][2] lge,blmap: br_lvl(35) -> bl_lvl(47)
 [   44.775204 / 12-27 17:05:16.481][2] mdss_fb_set_backlight: [AOD] Save unset_bl_level(47) in U3 mode. Will be updated when kick off function
 [   44.780416 / 12-27 17:05:16.491][2] [Touch] sw49407_te_info : 545, 16.63 ms, 60.11 hz
 [   44.780447 / 12-27 17:05:16.491][2] [Touch] touch_ic_init End
 [   44.782252 / 12-27 17:05:16.491][3] mdss_fb_update_backlight: [Display] backlight sent to panel :47 in mdss_fb_update_backlight
 [   44.784833 / 12-27 17:05:16.491][3] qpnp_wled_module_en : wled module enable
 [   44.790415 / 12-27 17:05:16.501][3] lge,blmap: br_lvl(38) -> bl_lvl(53)
 [   44.804247 / 12-27 17:05:16.511][2] lge,blmap: br_lvl(42) -> bl_lvl(60)
 [   44.805358 / 12-27 17:05:16.511][0] [Touch] TC_Driving OK
 [   44.820567 / 12-27 17:05:16.531][0] lge,blmap: br_lvl(45) -> bl_lvl(66)
 [   44.824632 / 12-27 17:05:16.531][0] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 1, voltage = 3016 
 [   44.835271 / 12-27 17:05:16.541][0] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 1, voltage = 2088 
 [   44.837182 / 12-27 17:05:16.541][0] lge,blmap: br_lvl(48) -> bl_lvl(71)
 [   44.853808 / 12-27 17:05:16.561][0] lge,blmap: br_lvl(52) -> bl_lvl(83)
 [   44.856027 / 12-27 17:05:16.561][0] qcom,qpnp-haptic qpnp-haptic-24: qpnp_hap_play: on = 0, voltage = 3016 
 [   44.870963 / 12-27 17:05:16.581][3] lge,blmap: br_lvl(55) -> bl_lvl(92)
 [   44.887161 / 12-27 17:05:16.591][3] lge,blmap: br_lvl(58) -> bl_lvl(102)
 [   44.903648 / 12-27 17:05:16.611][2] lge,blmap: br_lvl(62) -> bl_lvl(116)
 [   44.920454 / 12-27 17:05:16.631][3] lge,blmap: br_lvl(65) -> bl_lvl(130)
 [   44.937341 / 12-27 17:05:16.641][0] lge,blmap: br_lvl(68) -> bl_lvl(143)
 [   44.953773 / 12-27 17:05:16.661][0] lge,blmap: br_lvl(72) -> bl_lvl(162)
 [   44.970515 / 12-27 17:05:16.681][0] lge,blmap: br_lvl(75) -> bl_lvl(178)
 [   44.987221 / 12-27 17:05:16.691][2] lge,blmap: br_lvl(78) -> bl_lvl(194)
 [   45.003714 / 12-27 17:05:16.711][3] lge,blmap: br_lvl(82) -> bl_lvl(215)
 [   45.020365 / 12-27 17:05:16.731][1] lge,blmap: br_lvl(85) -> bl_lvl(232)
 [   45.037125 / 12-27 17:05:16.741][0] lge,blmap: br_lvl(88) -> bl_lvl(251)
 [   45.053764 / 12-27 17:05:16.761][1] lge,blmap: br_lvl(92) -> bl_lvl(277)
 [   45.070799 / 12-27 17:05:16.781][1] lge,blmap: br_lvl(95) -> bl_lvl(297)
 [   45.087333 / 12-27 17:05:16.791][1] lge,blmap: br_lvl(98) -> bl_lvl(318)
 [   45.104000 / 12-27 17:05:16.811][0] lge,blmap: br_lvl(102) -> bl_lvl(349)
 [   45.120941 / 12-27 17:05:16.831][0] lge,blmap: br_lvl(105) -> bl_lvl(371)
 [   45.137184 / 12-27 17:05:16.841][0] lge,blmap: br_lvl(108) -> bl_lvl(394)
 [   45.153924 / 12-27 17:05:16.861][0] lge,blmap: br_lvl(112) -> bl_lvl(428)
 [   45.170619 / 12-27 17:05:16.881][0] lge,blmap: br_lvl(115) -> bl_lvl(453)
 [   45.188066 / 12-27 17:05:16.891][0] lge,blmap: br_lvl(117) -> bl_lvl(470)
 [   45.610786 / 12-27 17:05:17.321][3] FG: update_sram_data: soc:[97], soc_raw[9202], voltage:[4195226], ocv:[4272283], current:[352018], batt_temp:[309], charge_raw [2913782 / 3167000]
 [   45.610933 / 12-27 17:05:17.321][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
 [   45.610952 / 12-27 17:05:17.321][3] SMBCHG: battchg_suspend: votes unchanged; skipping
 [   45.621876 / 12-27 17:05:17.331][3] FG: update_sram_data: soc:[97], soc_raw[9202], voltage:[4195226], ocv:[4272283], current:[352018], batt_temp:[309], charge_raw [2913782 / 3167000]
 [   45.621902 / 12-27 17:05:17.331][3] SMBCHG: smbchg_cc_esr_wa_check: ESR count is not zero, skipping
 [   45.621919 / 12-27 17:05:17.331][3] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
 [   45.622001 / 12-27 17:05:17.331][3] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
 [   45.622011 / 12-27 17:05:17.331][3] SMBCHG: usb_icl: votes unchanged; skipping
 [   45.622022 / 12-27 17:05:17.331][3] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
 [   45.622032 / 12-27 17:05:17.331][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [   45.623087 / 12-27 17:05:17.331][3] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
 [   47.048588 / 12-27 17:05:18.751][1] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
 [   47.048636 / 12-27 17:05:18.751][1] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[500], PMI_IUSB[1700], SMB_IUSB[0]
 [   47.048665 / 12-27 17:05:18.751][1] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
 [   47.048691 / 12-27 17:05:18.751][1] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[4833]
 [   47.048716 / 12-27 17:05:18.751][1] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[97], BATT_VOL[4195], BATT_TEMP[309], BATT_CUR[352018]
 [   47.048743 / 12-27 17:05:18.751][1] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[CHARGING/500MA/CC], SAFTY_STATE[Set/Not yet]
 [   47.048767 / 12-27 17:05:18.751][1] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[45], PA_THERM[33], BOARD_THERM[31] VTS[372]
 [   47.598738 / 12-27 17:05:19.301][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   49.004100 / 12-27 17:05:20.721][2] RX msgq status HW:0x0, SW:2:
 [   49.017684 / 12-27 17:05:20.721][2] tasha_codec tasha_codec: tasha_swrm_clock: swrm clock users 0
 [   49.239889 / 12-27 17:05:20.941][2] [CCAudit] do_sys_open error=-13 file=/proc/self/oom_score_adj flag=655361 proc=adbd parent=adbd
 [   50.265623 / 12-27 17:05:21.971][0] lge,blmap: br_lvl(118) -> bl_lvl(479)
 [   50.299392 / 12-27 17:05:22.011][0] lge,blmap: br_lvl(119) -> bl_lvl(487)
 [   50.315492 / 12-27 17:05:22.021][0] lge,blmap: br_lvl(120) -> bl_lvl(496)
 [   50.320435 / 12-27 17:05:22.031][2] pet_watchdog [enable : 1, jiffies : 4294942328, delay_time : 1000]
 [   50.348331 / 12-27 17:05:22.061][0] lge,blmap: br_lvl(121) -> bl_lvl(504)
 [   50.619234 / 12-27 17:05:22.321][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   50.619446 / 12-27 17:05:22.321][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   52.682113 / 12-27 17:05:24.391][2] lge,blmap: br_lvl(119) -> bl_lvl(487)
 [   52.687243 / 12-27 17:05:24.391][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   52.687388 / 12-27 17:05:24.391][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   52.698563 / 12-27 17:05:24.401][2] lge,blmap: br_lvl(115) -> bl_lvl(453)
 [   52.704053 / 12-27 17:05:24.411][1] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
 [   52.711614 / 12-27 17:05:24.421][2] lge,blmap: br_lvl(112) -> bl_lvl(428)
 [   52.727948 / 12-27 17:05:24.431][2] lge,blmap: br_lvl(109) -> bl_lvl(402)
 [   52.745531 / 12-27 17:05:24.451][2] lge,blmap: br_lvl(106) -> bl_lvl(379)
 [   52.762170 / 12-27 17:05:24.471][2] lge,blmap: br_lvl(103) -> bl_lvl(356)
 [   52.778925 / 12-27 17:05:24.481][2] lge,blmap: br_lvl(99) -> bl_lvl(326)
 [   52.795552 / 12-27 17:05:24.501][2] lge,blmap: br_lvl(96) -> bl_lvl(303)
 [   52.812220 / 12-27 17:05:24.521][2] lge,blmap: br_lvl(93) -> bl_lvl(284)
 [   52.828657 / 12-27 17:05:24.531][2] lge,blmap: br_lvl(89) -> bl_lvl(258)
 [   52.845221 / 12-27 17:05:24.551][2] lge,blmap: br_lvl(86) -> bl_lvl(238)
 [   52.862425 / 12-27 17:05:24.571][2] lge,blmap: br_lvl(83) -> bl_lvl(220)
 [   52.878707 / 12-27 17:05:24.581][2] lge,blmap: br_lvl(79) -> bl_lvl(199)
 [   52.895155 / 12-27 17:05:24.601][2] lge,blmap: br_lvl(76) -> bl_lvl(183)
 [   52.911949 / 12-27 17:05:24.621][2] lge,blmap: br_lvl(73) -> bl_lvl(167)
 [   52.928420 / 12-27 17:05:24.631][2] lge,blmap: br_lvl(69) -> bl_lvl(148)
 [   52.945118 / 12-27 17:05:24.651][2] lge,blmap: br_lvl(66) -> bl_lvl(134)
 [   52.962282 / 12-27 17:05:24.671][2] lge,blmap: br_lvl(63) -> bl_lvl(120)
 [   52.978373 / 12-27 17:05:24.681][2] lge,blmap: br_lvl(59) -> bl_lvl(105)
 [   52.995323 / 12-27 17:05:24.701][2] lge,blmap: br_lvl(56) -> bl_lvl(95)
 [   53.011870 / 12-27 17:05:24.721][2] lge,blmap: br_lvl(53) -> bl_lvl(86)
 [   53.028353 / 12-27 17:05:24.731][2] lge,blmap: br_lvl(49) -> bl_lvl(73)
 [   53.045365 / 12-27 17:05:24.751][2] lge,blmap: br_lvl(46) -> bl_lvl(67)
 [   53.062448 / 12-27 17:05:24.771][2] lge,blmap: br_lvl(43) -> bl_lvl(62)
 [   53.078335 / 12-27 17:05:24.781][2] lge,blmap: br_lvl(39) -> bl_lvl(54)
 [   53.094788 / 12-27 17:05:24.801][2] lge,blmap: br_lvl(36) -> bl_lvl(49)
 [   53.111629 / 12-27 17:05:24.821][2] lge,blmap: br_lvl(33) -> bl_lvl(45)
 [   53.128102 / 12-27 17:05:24.831][2] lge,blmap: br_lvl(29) -> bl_lvl(40)
 [   53.146335 / 12-27 17:05:24.851][2] lge,blmap: br_lvl(26) -> bl_lvl(36)
 [   53.162401 / 12-27 17:05:24.871][2] lge,blmap: br_lvl(23) -> bl_lvl(32)
 [   53.178441 / 12-27 17:05:24.881][2] lge,blmap: br_lvl(19) -> bl_lvl(31)
 [   53.195194 / 12-27 17:05:24.901][2] lge,blmap: br_lvl(16) -> bl_lvl(30)
 [   53.211754 / 12-27 17:05:24.921][2] lge,blmap: br_lvl(13) -> bl_lvl(30)
 [   53.228030 / 12-27 17:05:24.931][2] lge,blmap: br_lvl(9) -> bl_lvl(29)
 [   53.244443 / 12-27 17:05:24.951][2] lge,blmap: br_lvl(6) -> bl_lvl(29)
 [   54.031102 / 12-27 17:05:26.941][3] RX msgq status HW:0x0, SW:2:
 [   55.235760 / 12-27 17:05:26.941][3] lge,blmap: br_lvl(0) -> bl_lvl(0)
 [   55.239846 / 12-27 17:05:26.941][3] qpnp_wled_module_en : wled module disable
 [   55.263769 / 12-27 17:05:26.971][0] [hl_mode] hl_mode off
 [   55.269621 / 12-27 17:05:26.971][0] __validate_and_set_roi: [AOD] Skip AOD area. is_black_frame : 1, mfd->panel_info->aod_cur_mode : 3
 [   55.288717 / 12-27 17:05:26.991][3] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xd4/0xe4 mode:4
 [   55.288737 / 12-27 17:05:26.991][3] [AOD][START]cur_mode : 3, blank mode : 4, aod_node : 0, keep_aod : 3
 [   55.288750 / 12-27 17:05:26.991][3] [AOD][END] cmd_status : 4, next_mode : 0 labibb_ctrl : ctrl
 [   55.306152 / 12-27 17:05:27.011][3] [Display] mdss_dsi_panel_off: ctrl=ffffffc076232018 ndx=0
 [   55.397377 / 12-27 17:05:27.101][3] [Touch] LCD_EVENT_LCD_MODE!
 [   55.397391 / 12-27 17:05:27.101][3] [Touch] lcd_mode: 0 (prev: 3)
 [   55.397399 / 12-27 17:05:27.101][3] [Touch] U0 mode change
 [   55.397414 / 12-27 17:05:27.101][3] [Touch] touch_suspend Start
 [   55.397441 / 12-27 17:05:27.101][3] [Touch] sw49407_suspend : touch_suspend start
 [   55.397448 / 12-27 17:05:27.101][3] [Touch] Skip lpwg_mode
 [   55.400702 / 12-27 17:05:27.111][3] [Touch] touch_suspend End
 [   55.400718 / 12-27 17:05:27.111][3] [Display] mdss_dsi_panel_off:-
 [   55.402697 / 12-27 17:05:27.111][3] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=1 req_power_state=0
 [   55.403203 / 12-27 17:05:27.111][3] [Display] mdss_dsi_off-:
 [   55.408439 / 12-27 17:05:27.111][3] mdss_fb_blank_sub: mdss_fb_blank_sub: -
 [   55.408469 / 12-27 17:05:27.111][3] [Touch] FB_BLANK
 [   55.414193 / 12-27 17:05:27.121][3] hdmi_tx_event_handler: event = MDSS_EVENT_SUSPEND suspend=0, hpd_feature=0
 [   55.470209 / 12-27 17:05:27.181][0] dhd_set_suspend: force extra Suspend setting 
 [   55.479592 / 12-27 17:05:27.181][1] dhd_get_suspend_bcn_li_dtim beacon=100 bcn_li_dtim=3 DTIM=1 Listen=10
 [   55.524761 / 12-27 17:05:27.231][3] [Touch] sw49407_clear_q_sensitivity : NORMAL(0)
 [   55.524773 / 12-27 17:05:27.231][3] [Touch] LPWG_UPDATE_ALL: mode[1], screen[OFF], sensor[FAR], qcover[OPEN]
 [   55.525183 / 12-27 17:05:27.231][3] [Touch] LPWG Active Area - NORMAL
 [   55.525191 / 12-27 17:05:27.231][3] [Touch] TCI1-type:4
 [   55.526073 / 12-27 17:05:27.231][3] [Touch] sw49407_lpwg_control mode = 1
 [   55.526272 / 12-27 17:05:27.231][3] [Touch] swipe disable
 [   55.526279 / 12-27 17:05:27.231][3] [Touch] sw49407_tc_driving = 0, 1
 [   55.526471 / 12-27 17:05:27.231][3] [Touch] DDI Display Mode = 0
 [   55.526830 / 12-27 17:05:27.231][3] [Touch] Reset Cnt : 30
 [   55.678324 / 12-27 17:05:27.381][0] [Touch] TC_Driving OK
 [   56.917962 / 12-27 17:05:28.621][1] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=2
 [   57.578130 / 12-27 17:05:29.281][1] [CCAudit] do_sys_open error=-30 file=animation.log flag=131649 proc=sh parent=adbd
 [   59.360484 / 12-27 17:05:31.071][1] dhd_prot_ioctl: SET PM to 2
 [   59.365892 / 12-27 17:05:31.071][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   59.366106 / 12-27 17:05:31.071][0] wl_host_event_get_data: Invalid event frame, err = -30
 [   60.340543 / 12-27 17:05:32.051][3] pet_watchdog [enable : 1, jiffies : 4294943330, delay_time : 1000]
 [   62.051465 / 12-27 17:05:33.761][1] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
 [   62.051529 / 12-27 17:05:33.761][1] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[500], PMI_IUSB[1700], SMB_IUSB[0]
 [   62.051568 / 12-27 17:05:33.761][1] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
 [   62.051605 / 12-27 17:05:33.761][1] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[4835]
 [   62.051639 / 12-27 17:05:33.761][1] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[98], BATT_VOL[4195], BATT_TEMP[308], BATT_CUR[352018]
 [   62.051680 / 12-27 17:05:33.761][1] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[CHARGING/500MA/CC], SAFTY_STATE[Set/Not yet]
 [   62.051713 / 12-27 17:05:33.761][1] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[39], PA_THERM[33], BOARD_THERM[31] VTS[344]
 [   62.051950 / 12-27 17:05:33.761][1] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
 [   62.052003 / 12-27 17:05:33.761][1] SMBCHG: battchg_suspend: votes unchanged; skipping
 [   62.067763 / 12-27 17:05:33.771][1] FG: update_sram_data: soc:[98], soc_raw[9208], voltage:[4305699], ocv:[4284032], current:[-421597], batt_temp:[308], charge_raw [2914868 / 3167000]
 [   62.067833 / 12-27 17:05:33.771][1] SMBCHG: smbchg_cc_esr_wa_check: ESR count is not zero, skipping
 [   62.067883 / 12-27 17:05:33.771][1] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
 [   62.068052 / 12-27 17:05:33.771][1] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
 [   62.068093 / 12-27 17:05:33.771][1] SMBCHG: usb_icl: votes unchanged; skipping
 [   62.068137 / 12-27 17:05:33.771][1] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
 [   62.068180 / 12-27 17:05:33.771][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
 [   62.069323 / 12-27 17:05:33.771][1] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
 [   63.680644 / 12-27 17:05:35.391][1] determine_lge_charging_state : states_change[0], next_state[0], pseudo_chg_ui[0]
 [   63.680712 / 12-27 17:05:35.391][1] LGE charging scenario : state 0 -> 0(0-0), temp=30, volt=4305, BTM=0, charger=1, cur_set=0/0, chg_cur = -421
 [   63.680771 / 12-27 17:05:35.391][1] [LGE-CC] lge_monitor_batt_temp_work : otp_ibat_current=0
 [   63.680964 / 12-27 17:05:35.391][1] [LGE-CC] lge_monitor_batt_temp_work : Reported Capacity : 98 / voltage : 4305
 [   63.681005 / 12-27 17:05:35.391][1] lge_power_changed_work
 [   63.681083 / 12-27 17:05:35.391][1] SMBCHG: smbchg_external_lge_power_changed: [LGE-CC] fcc 3100, otp set 3100
 [   63.681115 / 12-27 17:05:35.391][1] SMBCHG: lgcc_set_ibat_current: chg_current[3100]
 [   63.681149 / 12-27 17:05:35.391][1] vote: name[SMBCHG: fcc], client_id[5], state[1], val[3100]
 [   63.681183 / 12-27 17:05:35.391][1] SMBCHG: fcc: votes unchanged; skipping
 [   63.681216 / 12-27 17:05:35.391][1] vote: name[SMBCHG: battchg_suspend], client_id[2], state[0], val[0]
 [   63.681248 / 12-27 17:05:35.391][1] SMBCHG: battchg_suspend: votes unchanged; skipping
 [   68.007134 / 12-27 17:05:39.711][2] [CCAudit] do_sys_open error=-13 file=/proc/self/oom_score_adj flag=655361 proc=adbd parent=adbd