API Byte commands for AppLamp.nl / Wifiledlamp.com Mi Light RGB / RGBW / Dual White Wifi LED bulbs and controllers

commands.js

/**
 Filename: commands.js
 AppLamp.nl led light API: wifi box byte commands
 © AppLamp.nl: you can share,modify and use this code (commercially) as long as you
 keep the referer "AppLamp.nl led light API" in the file header.

 RESPECT AT LEAST 50 MS BETWEEN EACH SEND COMMAND TO PREVENT PACKAGE LOSS
 The functions in this file will return the appropriate hex commands as 3 byte array
 to send to an UDP-socket towards WIFI BOX-IP:8899 (see wifibox.js)
 
 Example Usage in Node JS:
 var cmd = require('commands.js');
 example turn on all white bulbs on:
 cmd.white.allOn();
 set the hue of a color bulb to yellow
 cmd.rgbw.hue(128);
 
 **/



var ColorRgbwCmd = function(){};
var WhiteCmd     = function(){};
var ColorRgbCmd  = function(){};
//makes the rgb/rgbw/white variables globally available in NodeJS
// for ex. use: commands.rgbw.hue(64);

module.exports = { rgb: new ColorRgbCmd()
		  ,rgbw: new ColorRgbwCmd()
		  ,white: new WhiteCmd() };
				   
				   

/*RGBW BULBS AND CONTROLLERS, 4-CHANNEL/ZONE MODELS */


/* Switch ON() your light or make it ACTIVE 
* use function parameter `zone` with value '0' to target ALL zones, 
* value '1' for zone 1, value '2' for zone 2,... to 4 
* You can also use this command to link your bulbs 
* Prepend this command once for the appropriate zone to activate the zone 
* before using hue() / brightness() / whiteMode() / effectModeNext()
*/
ColorRgbwCmd.prototype.on = function(zone)
{  return [[0x42,0x45,0x47,0x49,0x4B][zone],0x00,0x55] }; 

/* use function parameter `zone` with value '0' to target ALL zones, 
* value '1' for zone 1, value '2' for zone 2,... to 4 */
ColorRgbwCmd.prototype.off = function(zone)
{  return [[0x41,0x46,0x48,0x4A,0x4C][zone],0x00,0x55] };

/* Shortcut to ON(0) */
ColorRgbwCmd.prototype.allOn  = function(){  this.on(0) };
ColorRgbwCmd.prototype.allOff = function(){  this.off(0) };

/* Hue range 0-255 [targets last ON() activated bulb(s)] */
ColorRgbwCmd.prototype.hue =  function(decimal)
{  
	var hex = decimal.toString(16);
	hex = (hex.length < 2) ? '0x0'+hex : '0x'+hex;	
	return [0x40,hex,0x55];
}
/* Switch to white mode [targets last ON() activated bulb(s)] */
ColorRgbwCmd.prototype.whiteMode = 	function(){  	return [0xC2,00,0x55] };
/* Brightness range 1-100 [targets last ON() activated bulb(s)]*/
ColorRgbwCmd.prototype.brightness = 	function(percent)
{ 	brightnessIndex = Math.max( 0,(Math.ceil(percent/100*19))-1 ); //19 steps
	return [ 0x4E 
		 ,[ 0x02,0x03,0x04,0x05,0x08,0x09
		   ,0x0A,0x0B,0x0D,0x0E,0x0F,0x10,0x11
		   ,0x12,0x13,0x14,0x15,0x17,0x18,0x19][brightnessIndex] 
		 , 0x55
	       ]; 	
};

/* Effect mode next [targets last ON() activated bulb(s)] */
ColorRgbwCmd.prototype.effectModeNext =	function(){  return [0x4D,0x00,0x55] };
ColorRgbwCmd.prototype.effectSpeedUp = 	function(){  return [0x44,0x00,0x55] };
ColorRgbwCmd.prototype.effectSpeedDown= function(){  return [0x44,0x00,0x55] };



/* DUAL WHITE BULBS & CONTROLLERS */


/* Switch ON() your light or make it ACTIVE 
* use function parameter `zone` with value '0' to target ALL zones, 
* value '1' for zone 1, value '2' for zone 2,... to 4 
* You can also use this command to link your bulbs 
* Prepend this command once for the appropriate zone to activate the zone 
* before using brightUp() / brightDown() / warmer() / cooler() */ 
WhiteCmd.prototype.on = function(zone){  return [[0x45, 0x38,0x3D,0x37,0x32][zone],0x00,0x55]; };

/* Switch OFF zone with value '0' to target ALL zones, 
* , value '1' for zone 1, value '2' for zone 2,... to 4 */	
WhiteCmd.prototype.off = function(zone)
{ return [[0x39, 0x3B,0x33,0x3A,0x36][zone],0x00,0x55]; };

/* Switch zone to Night Light Mode with value '0' to target ALL zones, 
* , value '1' for zone 1, value '2' for zone 2,... to 4 */	
WhiteCmd.prototype.nightMode = function(zone)
{ return [[0xB9, 0x3B,0x33,0x3A,0x36][index],0x00,0x55]; };
WhiteCmd.prototype.allOn = 		function(){ return [0x45,0x00,0x55] };
WhiteCmd.prototype.allOff = 	function(){ return [0x39,0x00,0x55] };
WhiteCmd.prototype.brightUp = 	function(){ return [0x3c,0x00,0x55] };
WhiteCmd.prototype.brightDown = function(){ return [0x34,0x00,0x55] };
WhiteCmd.prototype.warmer = 	function(){ return [0x3E,0x00,0x55] };
WhiteCmd.prototype.cooler = 	function(){ return [0x3F,0x00,0x55] };



/* RGB BULBS & CONTROLLERS, PREVIOUS GNERATION SINGLE CHANNEL/ZONE*/
						
ColorRgbCmd.prototype.off = function(){ return [0x21,0x00,0x55] };
ColorRgbCmd.prototype.on = function(){ return [0x22,0x00,0x55] };
ColorRgbCmd.prototype.hue = function(decimal)
{  
	var hex = decimal.toString(16);
	hex = (hex.length < 2) ? '0x0'+hex : '0x'+hex;	
	return [0x20,hex,0x55]; 	
};
ColorRgbCmd.prototype.brightUp = 	function(){ return [0x23,0x00,0x55] };
ColorRgbCmd.prototype.brightDown = 	function(){ return [0x24,0x00,0x55] };
ColorRgbCmd.prototype.speedUp = 	function(){ return [0x25,0x00,0x55] };
ColorRgbCmd.prototype.speedDown = 	function(){ return [0x26,0x00,0x55] };
ColorRgbCmd.prototype.effectSpeedUp = 	function(){ return [0x27,0x00,0x55] };
ColorRgbCmd.prototype.effectSpeedDown = function(){ return [0x28,0x00,0x55] };

@jannehietamaki See my comments on your fork regarding the OneChannel command set, Did anyone tried this with the FUT-36 LED strip controller?