TerryGeng

ssh-keygen -e -m pem -f ~/.ssh/id_rsa.pub | sed '1d;$d' | tr -d '\n' | base64 -d | od -t x1 -An | tr -d ' \n' | tr 'a-f' 'A-F' | sed 's/\(.\{8\}\)/\1 /g' | fold -w 54

G-UK

Introduction

The objective of these instructions is to create a complete Arm64 OS (Userland and Kernel) using Debian Debootstrap and RPI-Update for use on the Raspberry Pi 3 and 4.

Prerequisites:

• An existing Debian/Raspbian system (any architecture will do)
• An empty SD card formatted as per a standard Raspbian installation mounted to /mnt/sd on the build system
  • 1st Partition 0-256MB = FAT32 (Mount to /mnt/sd/boot)
  • 2nd Partition 256MB+ = EXT4 (Mount to /mnt/sd)

Set-up basic Debian system

zer4tul

提问的智慧

Eric Steven Raymond, Thyrsus Enterprises, < [email protected] >
Rick Moen, < [email protected] >

翻译：柯非, < [email protected] >

这篇译文基于2014.05.21更新的原文修订版3.10。

特别感谢王刚，此前本文的翻译是由他进行的。