gistfile1.txt

--- TLP 1.10.0-beta.1_91672cb --------------------------------------------

+++ Configured Settings:
defaults.conf L0006: TLP_ENABLE="1"
defaults.conf L0007: TLP_WARN_LEVEL="3"
defaults.conf L0008: TLP_MSG_COLORS="91 93 1 92"
defaults.conf L0009: TLP_AUTO_SWITCH="2"
defaults.conf L0010: TLP_PROFILE_AC="PRF"
defaults.conf L0011: TLP_PROFILE_BAT="BAL"
defaults.conf L0012: DISK_IDLE_SECS_ON_AC="0"
defaults.conf L0013: DISK_IDLE_SECS_ON_BAT="2"
defaults.conf L0014: MAX_LOST_WORK_SECS_ON_AC="15"
defaults.conf L0015: MAX_LOST_WORK_SECS_ON_BAT="60"
defaults.conf L0016: CPU_ENERGY_PERF_POLICY_ON_AC="balance_performance"
defaults.conf L0017: CPU_ENERGY_PERF_POLICY_ON_BAT="balance_power"
defaults.conf L0018: CPU_ENERGY_PERF_POLICY_ON_SAV="power"
defaults.conf L0019: PLATFORM_PROFILE_ON_AC="performance"
defaults.conf L0020: PLATFORM_PROFILE_ON_BAT="balanced"
defaults.conf L0021: PLATFORM_PROFILE_ON_SAV="low-power"
defaults.conf L0022: NMI_WATCHDOG="0"
defaults.conf L0023: DISK_DEVICES="nvme0n1 sda"
defaults.conf L0024: DISK_APM_LEVEL_ON_AC="254 254"
defaults.conf L0025: DISK_APM_LEVEL_ON_BAT="128 128"
defaults.conf L0026: DISK_APM_CLASS_DENYLIST="usb ieee1394"
defaults.conf L0027: DISK_IOSCHED="keep keep"
defaults.conf L0028: SATA_LINKPWR_ON_AC="med_power_with_dipm"
defaults.conf L0029: SATA_LINKPWR_ON_BAT="med_power_with_dipm"
defaults.conf L0030: AHCI_RUNTIME_PM_ON_AC="on"
defaults.conf L0031: AHCI_RUNTIME_PM_ON_BAT="auto"
defaults.conf L0032: AHCI_RUNTIME_PM_TIMEOUT="15"
defaults.conf L0033: PCIE_ASPM_ON_AC="default"
defaults.conf L0034: PCIE_ASPM_ON_BAT="default"
defaults.conf L0035: INTEL_GPU_POWER_PROFILE_ON_AC="base"
defaults.conf L0036: INTEL_GPU_POWER_PROFILE_ON_BAT="base"
defaults.conf L0037: INTEL_GPU_POWER_PROFILE_ON_SAV="power_saving"
defaults.conf L0038: RADEON_DPM_PERF_LEVEL_ON_AC="auto"
defaults.conf L0039: RADEON_DPM_PERF_LEVEL_ON_BAT="auto"
defaults.conf L0040: RADEON_DPM_PERF_LEVEL_ON_SAV="low"
defaults.conf L0041: AMDGPU_ABM_LEVEL_ON_AC="0"
defaults.conf L0042: AMDGPU_ABM_LEVEL_ON_BAT="1"
defaults.conf L0043: AMDGPU_ABM_LEVEL_ON_SAV="3"
defaults.conf L0044: WIFI_PWR_ON_AC="off"
defaults.conf L0045: WIFI_PWR_ON_BAT="on"
defaults.conf L0046: WOL_DISABLE="Y"
defaults.conf L0047: SOUND_POWER_SAVE_ON_AC="1"
defaults.conf L0048: SOUND_POWER_SAVE_ON_BAT="1"
defaults.conf L0049: SOUND_POWER_SAVE_CONTROLLER="Y"
defaults.conf L0050: BAY_POWEROFF_ON_AC="0"
defaults.conf L0051: BAY_POWEROFF_ON_BAT="0"
defaults.conf L0052: BAY_DEVICE="sr0"
defaults.conf L0053: RUNTIME_PM_ON_AC="on"
defaults.conf L0054: RUNTIME_PM_ON_BAT="auto"
defaults.conf L0055: RUNTIME_PM_DRIVER_DENYLIST="amdgpu mei_me nouveau nvidia xhci_hcd"
defaults.conf L0056: USB_AUTOSUSPEND="1"
defaults.conf L0057: USB_EXCLUDE_AUDIO="1"
defaults.conf L0058: USB_EXCLUDE_BTUSB="0"
defaults.conf L0059: USB_EXCLUDE_PHONE="0"
defaults.conf L0060: USB_EXCLUDE_PRINTER="1"
defaults.conf L0061: USB_EXCLUDE_WWAN="0"
defaults.conf L0062: RESTORE_DEVICE_STATE_ON_STARTUP="0" #! Parameter is deprecated: feature will be removed with the next release
defaults.conf L0063: RESTORE_THRESHOLDS_ON_BAT="1"
defaults.conf L0064: NATACPI_ENABLE="1"
defaults.conf L0065: TPSMAPI_ENABLE="1"
/etc/tlp.d/01-framework.conf L0001: START_CHARGE_THRESH_BAT0="75"
/etc/tlp.d/01-framework.conf L0002: STOP_CHARGE_THRESH_BAT0="80"

+++ System Info
System         = Framework A5 Laptop 13 (AMD Ryzen 7040Series)
BIOS           = INSYDE Corp. 03.18
OS release     = CachyOS
Kernel         = 6.19.10-1-cachyos #1 SMP PREEMPT_DYNAMIC Wed, 25 Mar 2026 16:49:22 +0000 x86_64
/proc/cmdline  = initrd=\initramfs-linux-cachyos.img root=UUID=07e6d93f-9204-45f9-96ee-cffa07980484 rw rootflags=subvol=/@ rd.luks.name=dcf12a80-356c-418b-80a5-c19b027d5e6c=cryptbuk zswap.enabled=1 resume=UUID=07e6d93f-9204-45f9-96ee-cffa07980484 resume_offset=31780103 nowatchdog vconsole.keymap=us quiet splash amdgpu.dcdebugmask=0x10
Init system    = systemd 260
Boot mode      = UEFI
Suspend mode   = [s2idle]

+++ TLP Status
tlp            = enabled, last run: 23:10:36, 3 sec(s) ago
tlp-rdw        = enabled
tlp-pd         = enabled, running
TLP profile    = power-saver/SAV
Power source   = battery

+++ Processor
CPU model = AMD Ryzen 5 7640U w/ Radeon 760M Graphics

/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver    = amd-pstate-epp
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = performance powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq  =  1116261 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq  =  4972435 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq  =   405914 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq  =  4972435 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/amd_pstate_lowest_nonlinear_freq  =  1116261 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/amd_pstate_max_freq               =  4972435 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference = power [EPP]
/sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power 

/sys/devices/system/cpu/cpu1..cpu11: omitted for clarity, use -v to show all

/sys/devices/system/cpu/amd_pstate/status              = active
/sys/devices/system/cpu/cpufreq/boost                  = 1
/sys/module/workqueue/parameters/power_efficient       = Y
/proc/sys/kernel/nmi_watchdog                          = 0

+++ Platform
/sys/firmware/acpi/platform_profile                    = low-power
/sys/firmware/acpi/platform_profile_choices            = low-power balanced performance

+++ Temperatures
CPU temp (acpitz)      =   35 [°C]
Fan speed (fan1)       =    0 [/min]

+++ File System
/proc/sys/vm/laptop_mode               =     2
/proc/sys/vm/dirty_writeback_centisecs =  6000
/proc/sys/vm/dirty_expire_centisecs    =  6000
/proc/sys/vm/dirty_ratio               =     0
/proc/sys/vm/dirty_background_ratio    =     0

+++ Disks
Devices = nvme0n1

/dev/nvme0n1:
  Type       = NVMe
  Disk ID    = nvme-WD_BLACK_SN850X_1000GB_************
  Model      = WD_BLACK SN850X 1000GB                  
  Firmware   = 620361WD
  Temp       = 32 °C
  Scheduler  = [none] mq-deadline kyber adios bfq (multi queue)

  Runtime PM:
    /sys/block/nvme0n1/device/power/control = auto, autosuspend_delay_ms = (not available)

  SMART info:
    Critical Warning:                   0x00
    Temperature:                        32 Celsius
    Available Spare:                    100%
    Available Spare Threshold:          10%
    Percentage Used:                    0%
    Data Units Written:                 1,533,581 [785 GB]
    Power Cycles:                       226
    Power On Hours:                     13
    Unsafe Shutdowns:                   13
    Media and Data Integrity Errors:    0

/dev/sda: not present.

+++ AMD Radeon Graphics
/sys/class/drm/card1/device/driver                                = amdgpu
/sys/class/drm/card1/device/power_state                           = D0
/sys/class/drm/card1/device/power_dpm_force_performance_level     = low
/sys/class/drm/card1/card1-eDP-1/amdgpu/panel_power_savings       = 3

+++ Wireless
bluetooth = off (software)
nfc       = none (no device)
wifi      = on
wwan      = none (no device)

hci0(btusb)                   : bluetooth, not connected
wlan0(iwlwifi)                : wifi, connected, power management = on

+++ Audio
/sys/module/snd_hda_intel/parameters/power_save            = 1
/sys/module/snd_hda_intel/parameters/power_save_controller = Y

+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = [default] performance powersave powersupersave

+++ PCIe Runtime Power Management
Autosuspend       = enabled
Enable devices    = (disabled)
Disable devices   = (disabled)
Device denylist   = (disabled)
Driver denylist   = amdgpu mei_me nouveau nvidia xhci_hcd

/sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:00.2/power/control = auto (0x080600, IOMMU, no driver)
/sys/bus/pci/devices/0000:00:01.0/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:02.0/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:02.2/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:02.4/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:03.0/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:03.1/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:04.0/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:04.1/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:08.0/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:08.1/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:08.2/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:08.3/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:14.0/power/control = auto (0x0c0500, SMBus, piix4_smbus)
/sys/bus/pci/devices/0000:00:14.3/power/control = auto (0x060100, ISA bridge, no driver)
/sys/bus/pci/devices/0000:00:18.0/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:18.1/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:18.2/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:18.3/power/control = auto (0x060000, Host bridge, k10temp)
/sys/bus/pci/devices/0000:00:18.4/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:18.5/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:18.6/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:18.7/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:01:00.0/power/control = auto (0x028000, Network controller, iwlwifi)
/sys/bus/pci/devices/0000:02:00.0/power/control = auto (0x010802, Non-Volatile memory controller, nvme)
/sys/bus/pci/devices/0000:c1:00.0/power/control = auto (0x030000, VGA compatible controller, amdgpu)
/sys/bus/pci/devices/0000:c1:00.1/power/control = auto (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:c1:00.2/power/control = auto (0x108000, Encryption controller, ccp)
/sys/bus/pci/devices/0000:c1:00.3/power/control = auto (0x0c0330, USB controller, xhci_hcd)
/sys/bus/pci/devices/0000:c1:00.4/power/control = auto (0x0c0330, USB controller, xhci_hcd)
/sys/bus/pci/devices/0000:c1:00.5/power/control = auto (0x048000, Multimedia controller, snd_pci_ps)
/sys/bus/pci/devices/0000:c1:00.6/power/control = auto (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:c2:00.0/power/control = auto (0x130000, Non-Essential Instrumentation [1300], no driver)
/sys/bus/pci/devices/0000:c2:00.1/power/control = auto (0x118000, Signal processing controller, amdxdna)
/sys/bus/pci/devices/0000:c3:00.0/power/control = auto (0x130000, Non-Essential Instrumentation [1300], no driver)
/sys/bus/pci/devices/0000:c3:00.3/power/control = auto (0x0c0330, USB controller, xhci_hcd)
/sys/bus/pci/devices/0000:c3:00.4/power/control = auto (0x0c0330, USB controller, xhci_hcd)
/sys/bus/pci/devices/0000:c3:00.5/power/control = auto (0x0c0340, USB controller, thunderbolt)
/sys/bus/pci/devices/0000:c3:00.6/power/control = auto (0x0c0340, USB controller, thunderbolt)

+++ USB
Autosuspend       = enabled
Device allowlist  = (not configured)
Device denylist   = (not configured)
Exclude audio     = enabled
Exclude bluetooth = disabled
Exclude phones    = disabled
Exclude printers  = enabled
Exclude WWAN      = disabled

Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =    0 -- Linux Foundation 2.0 root hub (hub)
Bus 001 Device 003 ID 8087:0032 control = auto, autosuspend_delay_ms = 2000 -- Intel Corp. AX210 Bluetooth (btusb)
Bus 001 Device 004 ID 27c6:609c control = auto, autosuspend_delay_ms = 2000 -- Shenzhen Goodix Technology Co.,Ltd. Goodix Fingerprint USB Device (no driver)
Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms =    0 -- Linux Foundation 3.0 root hub (hub)
Bus 003 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =    0 -- Linux Foundation 2.0 root hub (hub)
Bus 003 Device 002 ID 32ac:001c control = auto, autosuspend_delay_ms = 2000 -- Framework Laptop Webcam Module (2nd Gen) (uvcvideo)
Bus 004 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms =    0 -- Linux Foundation 3.0 root hub (hub)
Bus 005 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =    0 -- Linux Foundation 2.0 root hub (hub)
Bus 006 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms =    0 -- Linux Foundation 3.0 root hub (hub)
Bus 007 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =    0 -- Linux Foundation 2.0 root hub (hub)
Bus 008 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms =    0 -- Linux Foundation 3.0 root hub (hub)

+++ Battery Care
Plugin: cros-ec
Supported features: charge thresholds, chargeonce, discharge, recalibrate
Driver usage:
* natacpi (cros_charge-control) = active (charge thresholds, force-discharge) - EC cmd v3
Parameter value ranges:
* START_CHARGE_THRESH_BAT0/1:  0(off)..99
* STOP_CHARGE_THRESH_BAT0/1:   1..100(default)

+++ Battery Status: BAT1
/sys/class/power_supply/BAT1/manufacturer                   = NVT
/sys/class/power_supply/BAT1/model_name                     = FRANGWA
/sys/class/power_supply/BAT1/cycle_count                    =     35
/sys/class/power_supply/BAT1/charge_full_design             =   3915 [mAh] ( 62526 mWh)
/sys/class/power_supply/BAT1/charge_full                    =   3984 [mAh] ( 63628 mWh)
/sys/class/power_supply/BAT1/charge_now                     =   2509 [mAh] ( 40071 mWh)
/sys/class/power_supply/BAT1/current_now                    =    446 [mA]  (  7123 mW)
/sys/class/power_supply/BAT1/status                         = Discharging

/sys/class/power_supply/BAT1/charge_control_start_threshold =      0 [%]
/sys/class/power_supply/BAT1/charge_control_end_threshold   =    100 [%]
/sys/class/power_supply/BAT1/charge_behaviour               = [auto] inhibit-charge force-discharge

Charge                                                      =   63.0 [%]
Capacity                                                    =  101.8 [%]