Last active
January 4, 2024 13:55
-
-
Save Blackshome/b87a33849ca06dea3623480dbbbb45bb to your computer and use it in GitHub Desktop.
temperature-control-exhaust-fan-inverted.yaml
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| blueprint: | |
| name: Temperature Control Exhaust Fan - Inverted | |
| description: > | |
| # ❄️ Temperature Control Exhaust Fan - Inverted | |
| **Version: 1.2** | |
| Let us know what you think of this blueprint and for community support including updates: [Click Here](https://community.home-assistant.io/t/temperature-control-exhaust-fan-inverted/526274/1) | |
| **The Automation Process:** | |
| - When the sensor falls below the set value it turns the fan ON. | |
| - When the sensor rises above the set value it turns the fan OFF. | |
| - You have the option to use the "Fan Speed - Off Switch Option". This is useful for turning OFF fans with different speeds. | |
| - You have the option to use the "Trigger Sensor By-pass". This allows you to add a switch to manually By-pass the trigger sensor so you can use the fan as normal by turning it ON and OFF manually. | |
| - You have the option to set a start time, an end time and select weekdays. This will only allow the automation to run between the time periods. | |
| - Safe guard built in for HA restart. | |
| Note: If you turn the fan on manually and the automation runs it will turn the fan OFF automatically. It is recommended to use the "Trigger Sensor By-pass" option if you would like to keep the fan ON or OFF for extended time periods. | |
| Required = * | |
| **Need help?** See our FAQ: [Click Here](https://community.home-assistant.io/t/temperature-control-exhaust-fan/515861/2) | |
| **If you like my blueprints, and would like to show your support or just say thank you?** [Click Here](https://www.paypal.com/donate/?hosted_button_id=WAZS3QSDTPGA8) 🙂 | |
| domain: automation | |
| input: | |
| trigger_sensor: | |
| name: Trigger Sensor * | |
| description: The trigger can be any sensor you like that has a numeric value. | |
| selector: | |
| entity: | |
| filter: | |
| domain: | |
| - sensor | |
| entity_turn_on: | |
| name: Fan Switch * | |
| description: Enter the fan you would like to turn ON. Can be any switch you like. | |
| selector: | |
| target: | |
| entity: | |
| domain: | |
| - switch | |
| - fan | |
| include_entity_turn_off: | |
| name: Use The Fan Speed - Switch Off Option (Optional) | |
| description: Sometimes you need to select a different entity to turn ON for the fan to turn OFF. | |
| This is normally used when you have a fan that has different speeds. | |
| default: fan_speed_off_disabled | |
| selector: | |
| select: | |
| options: | |
| - label: Enable the fan speed - switch off option | |
| value: "fan_speed_off_enabled" | |
| - label: Disable the fan speed - switch off option | |
| value: "fan_speed_off_disabled" | |
| entity_turn_off: | |
| name: Fan Speed - Switch Off Option (Optional) | |
| description: Select the entity that will turn the fan off. | |
| Please DO NOT select the same entities that are selected above in "Fan Switch" here, as the automation will not work. | |
| default: [] | |
| selector: | |
| entity: | |
| multiple: true | |
| filter: | |
| domain: | |
| - switch | |
| - fan | |
| falling_value: | |
| name: Falling Value | |
| description: The falling value to turn the fan ON. | |
| default: 20 | |
| selector: | |
| number: | |
| min: 0 | |
| max: 100 | |
| step: 0.5 | |
| unit_of_measurement: value | |
| rising_value: | |
| name: Rising Value | |
| description: The rising value to turn the fan OFF. | |
| default: 20 | |
| selector: | |
| number: | |
| min: 0 | |
| max: 100 | |
| step: 0.5 | |
| unit_of_measurement: value | |
| include_bypass: | |
| name: Use The Trigger Sensor By-pass Option (Optional) | |
| description: Select enable or disable. All of the three enable options will allow manual control of your fans. | |
| The three enable options are only for selecting what should happen when you turn the by-pass ON. | |
| default: bypass_disabled | |
| selector: | |
| select: | |
| options: | |
| - label: 1 - Enable the By-pass - Turn fan ON | |
| value: "bypass_enabled_turn_on" | |
| - label: 2 - Enable the By-pass - Turn fan OFF | |
| value: "bypass_enabled" | |
| - label: 3 - Enable the By-pass - Keep the current fan state | |
| value: "bypass_enabled_stop" | |
| - label: Disable the By-pass option | |
| value: "bypass_disabled" | |
| trigger_bypass: | |
| name: Trigger Sensor By-pass | |
| description: Select a switch that will By-pass the trigger sensor and make your fan function as normal. | |
| The entity cannot be included in the "Fan Switch" selection. | |
| default: [] | |
| selector: | |
| entity: | |
| include_bypass_auto_off: | |
| name: Use The By-pass Auto OFF Option (Optional) | |
| description: This is used when you turn the by-pass ON and you would like the by-pass to automatically turn OFF in a set time delay. | |
| It can also be used as a timer to turn the fan ON and then OFF if you have chosen to use "Enable the By-pass - Turn fan ON" above. | |
| default: bypass_auto_off_disabled | |
| selector: | |
| select: | |
| options: | |
| - label: Enable the by-pass auto off option | |
| value: "bypass_auto_off_enabled" | |
| - label: Disable the by-pass auto off option | |
| value: "bypass_auto_off_disabled" | |
| bypass_auto_off_delay: | |
| name: By-pass Auto OFF - Time Delay | |
| description: Set the by-pass auto OFF time delay. | |
| default: 60 | |
| selector: | |
| number: | |
| min: 1 | |
| max: 240 | |
| step: 1 | |
| unit_of_measurement: minutes | |
| include_time: | |
| name: Use The Time Options (Optional) | |
| description: Use the "Start Time", "End Time" and the "Weekdays" values to only run the automation between the time periods. | |
| default: time_disabled | |
| selector: | |
| select: | |
| options: | |
| - label: Enable the time options | |
| value: "time_enabled" | |
| - label: Disable the time options | |
| value: "time_disabled" | |
| after_time: | |
| name: Start Time | |
| description: Set the start time. | |
| default: 00:00:00 | |
| selector: | |
| time: | |
| before_time: | |
| name: End Time | |
| description: Set the end time. | |
| default: 00:00:00 | |
| selector: | |
| time: | |
| weekday_options: | |
| name: Weekdays | |
| description: Select the days of the week you would like the automation to run. You must select "Enable the time options" above for the weekdays selections to work. | |
| default: | |
| - mon | |
| - tue | |
| - wed | |
| - thu | |
| - fri | |
| - sat | |
| - sun | |
| selector: | |
| select: | |
| multiple: true | |
| mode: list | |
| options: | |
| - label: Monday | |
| value: "mon" | |
| - label: Tuesday | |
| value: "tue" | |
| - label: Wednesday | |
| value: "wed" | |
| - label: Thursday | |
| value: "thu" | |
| - label: Friday | |
| value: "fri" | |
| - label: Saturday | |
| value: "sat" | |
| - label: Sunday | |
| value: "sun" | |
| # If the temp falls below the set point again it will restart the automation. | |
| mode: restart | |
| max_exceeded: silent | |
| variables: | |
| trigger_sensor: !input trigger_sensor | |
| entity_turn_on: !input entity_turn_on | |
| include_entity_turn_off: !input include_entity_turn_off | |
| entity_turn_off: !input entity_turn_off | |
| falling_value: !input falling_value | |
| rising_value: !input rising_value | |
| include_bypass: !input include_bypass | |
| trigger_bypass: !input trigger_bypass | |
| include_bypass_auto_off: !input include_bypass_auto_off | |
| bypass_auto_off_delay: !input bypass_auto_off_delay | |
| include_time: !input include_time | |
| after_time: !input after_time | |
| before_time: !input before_time | |
| weekday_options: !input weekday_options | |
| trigger: | |
| - platform: numeric_state | |
| id: "t0" | |
| entity_id: !input trigger_sensor | |
| below: !input falling_value | |
| - platform: time | |
| id: "t1" | |
| at: !input after_time | |
| - platform: time | |
| id: "t2" | |
| at: !input before_time | |
| - platform: state | |
| id: "t3" | |
| entity_id: !input trigger_bypass | |
| from: "off" | |
| to: "on" | |
| - platform: state | |
| id: "t4" | |
| entity_id: !input trigger_bypass | |
| from: "on" | |
| to: "off" | |
| - platform: homeassistant | |
| id: "t5" | |
| event: start | |
| # All Conditions | |
| condition: | |
| #Trigger conditions | |
| - condition: or | |
| conditions: | |
| - condition: and # trigger on rising value is below set point | |
| conditions: | |
| - condition: numeric_state | |
| entity_id: !input trigger_sensor | |
| below: !input falling_value | |
| - condition: trigger | |
| id: 't0' | |
| - condition: and # trigger by start of time & check rising value is below set point | |
| conditions: | |
| - condition: numeric_state | |
| entity_id: !input trigger_sensor | |
| below: !input falling_value | |
| - "{{ include_time == 'time_enabled' }}" | |
| - condition: trigger | |
| id: 't1' | |
| - condition: and # trigger by end of time & check rising value is below set point | |
| conditions: | |
| - condition: numeric_state | |
| entity_id: !input trigger_sensor | |
| below: !input falling_value | |
| - "{{ include_time == 'time_enabled' }}" | |
| - condition: trigger | |
| id: 't2' | |
| - condition: and # trigger by by-pass turning on | |
| conditions: | |
| - condition: trigger | |
| id: 't3' | |
| - "{{ (include_bypass == 'bypass_enabled_turn_on') or (include_bypass == 'bypass_enabled') or (include_bypass == 'bypass_enabled_stop') }}" | |
| - condition: and # trigger by by-pass turning off | |
| conditions: | |
| - condition: trigger | |
| id: 't4' | |
| - "{{ (include_bypass == 'bypass_enabled') or (include_bypass == 'bypass_enabled_stop') or (include_bypass == 'bypass_enabled_turn_on') }}" | |
| - condition: and # trigger by HA Restart & check if any fans are on or if the by-pass auto off is enabled | |
| conditions: | |
| - "{{ (expand(entity_turn_on.entity_id) | selectattr('state', '==', 'on') | list | count > 0) or ((include_bypass_auto_off == 'bypass_auto_off_enabled') and (states[trigger_bypass].state == 'on')) }}" | |
| - condition: trigger | |
| id: 't5' | |
| - condition: and # trigger by HA Restart & check rising value is below set value | |
| conditions: | |
| - condition: numeric_state | |
| entity_id: !input trigger_sensor | |
| below: !input falling_value | |
| - condition: trigger | |
| id: 't5' | |
| # Check the By-pass | |
| - condition: or | |
| conditions: | |
| - "{{ include_bypass == 'bypass_disabled' }}" | |
| - "{{ trigger_bypass == [] }}" | |
| - "{{ (include_bypass == 'bypass_enabled_turn_on') and (states[trigger_bypass].state == 'off') }}" | |
| - "{{ (include_bypass == 'bypass_enabled') and (states[trigger_bypass].state == 'off') }}" | |
| - "{{ (include_bypass == 'bypass_enabled_stop') and (states[trigger_bypass].state == 'off') }}" | |
| - "{{ (include_bypass_auto_off == 'bypass_auto_off_enabled') and (states[trigger_bypass].state == 'off') }}" | |
| - "{{ (include_bypass_auto_off == 'bypass_auto_off_enabled') and (states[trigger_bypass].state == 'on') and (trigger.id == 't5') }}" | |
| - condition: trigger | |
| id: 't3' | |
| # Check the time options | |
| - condition: or | |
| conditions: | |
| - "{{ include_time == 'time_disabled' }}" | |
| - condition: and | |
| conditions: | |
| - condition: time | |
| after: !input after_time | |
| before: !input before_time | |
| weekday: !input weekday_options | |
| - "{{ include_time == 'time_enabled' }}" | |
| - condition: and | |
| conditions: | |
| - condition: time | |
| weekday: !input weekday_options | |
| - condition: trigger | |
| id: 't2' | |
| action: | |
| - choose: | |
| - alias: "End of time to turn fan off" | |
| conditions: | |
| - condition: trigger | |
| id: 't2' | |
| sequence: | |
| - alias: "Turn off the entity" | |
| service: homeassistant.turn_off | |
| target: !input entity_turn_on | |
| - choose: | |
| - alias: "Check if the fan speed off is enabled" | |
| conditions: | |
| - "{{ include_entity_turn_off == 'fan_speed_off_enabled' }}" | |
| sequence: | |
| - alias: "Fan speed off option" | |
| service: homeassistant.turn_on | |
| entity_id: !input entity_turn_off | |
| - stop: "Stop the automation" | |
| - alias: "By-pass is turned on & check by-pass option - turn fan off" | |
| conditions: | |
| - condition: trigger | |
| id: 't3' | |
| - condition: template | |
| value_template: "{{ include_bypass == 'bypass_enabled' }}" | |
| sequence: | |
| - alias: "Turn off the fan" | |
| service: homeassistant.turn_off | |
| target: !input entity_turn_on | |
| - choose: | |
| - alias: "Check if the fan speed off is enabled" | |
| conditions: | |
| - "{{ include_entity_turn_off == 'fan_speed_off_enabled' }}" | |
| sequence: | |
| - alias: "Fan speed off option" | |
| service: homeassistant.turn_on | |
| entity_id: !input entity_turn_off | |
| - alias: "Check by-pass settings and preform the correct action" | |
| if: | |
| - alias: "Check if the by-pass auto off is enabled" | |
| condition: template | |
| value_template: "{{ include_bypass_auto_off == 'bypass_auto_off_enabled' }}" | |
| then: | |
| - alias: "Wait the number of minutes set in the by-pass auto off time delay" | |
| delay: | |
| minutes: !input bypass_auto_off_delay | |
| - alias: "Turn off the by-pass" | |
| service: homeassistant.turn_off | |
| entity_id: !input trigger_bypass | |
| - stop: "Stop the automation" | |
| else: | |
| - stop: "Stop the automation" | |
| - alias: "By-pass is turned on & check by-pass option - keep the current fan state" | |
| conditions: | |
| - condition: trigger | |
| id: 't3' | |
| - condition: template | |
| value_template: "{{ include_bypass == 'bypass_enabled_stop' }}" | |
| sequence: | |
| - alias: "Check by-pass settings and preform the correct action" | |
| if: | |
| - alias: "Check if the by-pass auto off is enabled" | |
| condition: template | |
| value_template: "{{ include_bypass_auto_off == 'bypass_auto_off_enabled' }}" | |
| then: | |
| - alias: "Wait the number of minutes set in the by-pass auto off time delay" | |
| delay: | |
| minutes: !input bypass_auto_off_delay | |
| - alias: "Turn off the by-pass" | |
| service: homeassistant.turn_off | |
| entity_id: !input trigger_bypass | |
| - stop: "Stop the automation" | |
| else: | |
| - stop: "Stop the automation" | |
| - alias: "By-pass is turned off & check if the sensor is above set value" | |
| conditions: | |
| - condition: trigger | |
| id: 't4' | |
| - condition: numeric_state | |
| entity_id: !input trigger_sensor | |
| above: !input rising_value | |
| sequence: | |
| - alias: "Turn off the fan" | |
| service: homeassistant.turn_off | |
| target: !input entity_turn_on | |
| - choose: | |
| - alias: "Check if the fan speed off is enabled" | |
| conditions: | |
| - "{{ include_entity_turn_off == 'fan_speed_off_enabled' }}" | |
| sequence: | |
| - alias: "Fan speed off option" | |
| service: homeassistant.turn_on | |
| entity_id: !input entity_turn_off | |
| - stop: "Stop the automation" | |
| - alias: "Safe Guard when HA restarts" | |
| conditions: | |
| - condition: trigger | |
| id: 't5' | |
| sequence: | |
| - alias: "Check automation and preform the correct action" | |
| if: | |
| - alias: "Check if the trigger sensor is on" | |
| condition: numeric_state | |
| entity_id: !input trigger_sensor | |
| below: !input falling_value | |
| then: | |
| - alias: "We need something here for the IF to continue" | |
| delay: | |
| seconds: 1 | |
| - choose: | |
| - alias: "Check if the by-pass auto off is enabled and by-pass is ON" | |
| conditions: | |
| - condition: template | |
| value_template: "{{ (include_bypass_auto_off == 'bypass_auto_off_enabled') and (states[trigger_bypass].state == 'on') }}" | |
| sequence: | |
| - alias: "Wait the number of minutes set in the by-pass auto off time delay" | |
| delay: | |
| minutes: !input bypass_auto_off_delay | |
| - alias: "Turn off the by-pass" | |
| service: homeassistant.turn_off | |
| entity_id: !input trigger_bypass | |
| - stop: "Stop the automation" | |
| else: | |
| - choose: | |
| - alias: "Check if the by-pass auto off is enabled and by-pass is ON" | |
| conditions: | |
| - condition: template | |
| value_template: "{{ (include_bypass_auto_off == 'bypass_auto_off_enabled') and (states[trigger_bypass].state == 'on') }}" | |
| sequence: | |
| - alias: "Wait the number of minutes set in the by-pass auto off time delay" | |
| delay: | |
| minutes: !input bypass_auto_off_delay | |
| - alias: "Turn off the by-pass" | |
| service: homeassistant.turn_off | |
| entity_id: !input trigger_bypass | |
| - stop: "Stop the automation" | |
| - alias: "Turn off the entity" | |
| service: homeassistant.turn_off | |
| target: !input entity_turn_on | |
| - choose: | |
| - alias: "Check if the fan speed off is enabled" | |
| conditions: | |
| - "{{ include_entity_turn_off == 'fan_speed_off_enabled' }}" | |
| sequence: | |
| - alias: "Fan speed off option" | |
| service: homeassistant.turn_on | |
| entity_id: !input entity_turn_off | |
| - stop: "Stop the automation" | |
| - choose: | |
| - alias: "Check if the fan speed off is enabled" | |
| conditions: | |
| - "{{ include_entity_turn_off == 'fan_speed_off_enabled' }}" | |
| sequence: | |
| - alias: "Fan speed off option" | |
| service: homeassistant.turn_off | |
| entity_id: !input entity_turn_off | |
| - alias: "Turn on the entity" | |
| service: homeassistant.turn_on | |
| target: !input entity_turn_on | |
| - choose: | |
| - alias: "By-pass is enabled & check by-pass option - turn fan on" | |
| conditions: | |
| - condition: trigger | |
| id: 't3' | |
| - condition: template | |
| value_template: "{{ include_bypass == 'bypass_enabled_turn_on' }}" | |
| sequence: | |
| - alias: "Check by-pass settings and preform the correct action" | |
| if: | |
| - alias: "Check if the by-pass auto off is enabled" | |
| condition: template | |
| value_template: "{{ include_bypass_auto_off == 'bypass_auto_off_enabled' }}" | |
| then: | |
| - alias: "Wait the number of minutes set in the by-pass auto off time delay" | |
| delay: | |
| minutes: !input bypass_auto_off_delay | |
| - alias: "Turn off the by-pass" | |
| service: homeassistant.turn_off | |
| entity_id: !input trigger_bypass | |
| - stop: "Stop the automation" | |
| else: | |
| - stop: "Stop the automation" | |
| - choose: | |
| - alias: "Check if the trigger is on and wait for it to go off" | |
| conditions: | |
| - condition: numeric_state | |
| entity_id: !input trigger_sensor | |
| below: !input rising_value | |
| sequence: | |
| - alias: "Wait until sensor is above set value" | |
| wait_for_trigger: | |
| platform: numeric_state | |
| entity_id: !input trigger_sensor | |
| above: !input rising_value | |
| - alias: "Turn off the entity" | |
| service: homeassistant.turn_off | |
| target: !input entity_turn_on | |
| - choose: | |
| - alias: "Check if the fan speed off is enabled" | |
| conditions: | |
| - "{{ include_entity_turn_off == 'fan_speed_off_enabled' }}" | |
| sequence: | |
| - alias: "Fan speed off option" | |
| service: homeassistant.turn_on | |
| entity_id: !input entity_turn_off |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment