Install build dependencies:
sudo apt-get install gtk-doc-tools liborc-0.4-0 liborc-0.4-dev libvorbis-dev libcdparanoia-dev libcdparanoia0 cdparanoia libvisual-0.4-0 libvisual-0.4-dev libvisual-0.4-plugins libvisual-projectm vorbis-tools vorbisgain libopus-dev libopus-doc libopus0 libopusfile-dev libopusfile0 libtheora-bin libtheora-dev libtheora-doc libvpx-dev libvpx-doc libvpx3 libqt5gstreamer-1.0-0 libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libflac++-dev libavc1394-dev libraw1394-dev libraw1394-tools libraw1394-doc libraw1394-tools libtag1-dev libtagc0-dev libwavpack-dev wavpack
Extras:
sudo apt-get install libfontconfig1-dev libfreetype6-dev libx11-dev libxext-dev libxfixes-dev libxi-dev libxrender-dev libxcb1-dev libx11-xcb-dev libxcb-glx0-dev
Additionally, if you do not configure with -qt-xcb (for QT only with gstreamer), you should also install these development packages:
sudo apt-get install libxcb-keysyms1-dev libxcb-image0-dev libxcb-shm0-dev libxcb-icccm4-dev libxcb-sync0-dev libxcb-xfixes0-dev libxcb-shape0-dev libxcb-randr0-dev libxcb-render-util0-dev
Some of these packages depend on others in this list, so installing one may cause others to be automatically installed. Other distributions may provide system packages with similar names.
Basic Qt dependencies:
sudo apt-get install libfontconfig1-dev libdbus-1-dev libfreetype6-dev libudev-dev
Dependencies for multimedia:
sudo apt-get install libasound2-dev libavcodec-dev libavformat-dev libswscale-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev gstreamer-tools gstreamer0.10-plugins-good gstreamer0.10-plugins-bad
QtWebKit dependencies:
sudo apt-get install libicu-dev libsqlite3-dev libxslt1-dev libssl-dev
Navigate to the source directory needed for the build:
Check out the sources, one by one:
git clone git://anongit.freedesktop.org/git/gstreamer/gstreamer
git clone git://anongit.freedesktop.org/git/gstreamer/gst-plugins-base
git clone git://anongit.freedesktop.org/git/gstreamer/gst-plugins-good
git clone git://anongit.freedesktop.org/git/gstreamer/gst-plugins-bad
git clone git://anongit.freedesktop.org/git/gstreamer/gst-plugins-ugly
git clone git://anongit.freedesktop.org/git/gstreamer/gst-libav
git clone git://anongit.freedesktop.org/git/gstreamer/gst-python
git clone https://cgit.freedesktop.org/gstreamer/gstreamer-vaapi
Prepare the target directories where the binaries will reside:
sudo mkdir -p /apps/gstreamer/git
sudo mkdir -p /apps/gst-plugins-base/git
sudo mkdir -p /apps/gst-plugins-good/git
sudo mkdir -p /apps/gst-plugins-bad/git
sudo mkdir -p /apps/gst-plugins-ugly/git
sudo mkdir -p /apps/gst-libav/git
sudo mkdir -p /apps/gst-python/git
sudo mkdir -p /apps/gstreamer-vaapi/git
Write an initial module file for gstreamer, to be expanded on completion when dependencies are built:
#%Module1.0
#####################################################################
##
## gstreamer Modulefile
## by Dennis Mungai on December 30 2016
##
## Locally built package
##
## Target: QT5
##
set appname gstreamer
set version git
set prefix /apps/${appname}/${version}/
set url "https://gstreamer.freedesktop.org/"
set msg "This module adds gstreamer v$version to various paths\n\nGstreamer Official Site: $url\n"
proc ModulesHelp { } {
puts stderr "$msg"
}
module-whatis "$msg"
conflict gstreamer
prepend-path PATH ${prefix}/bin
prepend-path LD_LIBRARY_PATH ${prefix}/lib
prepend-path PKG_CONFIG_PATH ${prefix}lib/pkgconfig
Now, to build:
Check out all sources above and navigate to each build directory:
cd gstreamer
git pull
./autogen.sh
./configure --prefix=/apps/gstreamer/git --enable-gtk-doc
time make -j$(nproc)
sudo make install
cd ..
cd gst-plugins-base
git pull
module load gstreamer/git
./autogen.sh --prefix=/apps/gst-plugins-base/git --enable-gtk-doc --enable-iso-codes --enable-orc
time make -j$(nproc)
sudo make install
cd ..
cd gst-plugins-good
git pull
module load gstreamer/git
./autogen.sh --prefix=/apps/gst-plugins-good/git --enable-gtk-doc --enable-orc
time make -j$(nproc)
sudo make install
cd ..
cd gst-plugins-ugly
git pull
./autogen.sh --prefix=/apps/gst-plugins-ugly/git --enable-gtk-doc --enable-orc
time make -j$(nproc)
sudo make install
cd ..
cd gst-libav
git pull
./autogen.sh --prefix=/apps/gst-libav/git --enable-gtk-doc --enable-orc
time make -j$(nproc)
sudo make install
cd ..
cd gst-plugins-bad
git pull
./autogen.sh --prefix=/apps/gst-plugins-bad/git --enable-gtk-doc --enable-orc --with-cuda-prefix=/usr/local/cuda
time make -j$(nproc)
sudo make install
cd ..
To build python bindings:
cd gst-python
module load gstreamer/git
git pull
./autogen.sh
./configure --prefix=/apps/gstreamer/git
time make -j$(nproc)
sudo make install
cd ..
Create all modules for the installed packages:
For the main gstreamer modulefile:
module show gstreamer/git
-------------------------------------------------------------------
/usr/share/modules/modulefiles/gstreamer/git:
module-whatis This module adds gstreamer vgit to various paths
Gstreamer Official Site: https://gstreamer.freedesktop.org/
conflict gstreamer
prepend-path PATH /apps/gstreamer/git//bin
prepend-path LD_LIBRARY_PATH /apps/gstreamer/git//lib
prepend-path PKG_CONFIG_PATH /apps/gstreamer/git/lib/pkgconfig
-------------------------------------------------------------------
Content:
#%Module1.0
#####################################################################
##
## gstreamer Modulefile
## by Dennis Mungai on December 30 2016
##
##
##
##
##
set appname gstreamer
set version git
set prefix /apps/${appname}/${version}/
set url "https://gstreamer.freedesktop.org/"
set msg "This module adds gstreamer v$version to various paths\n\nGstreamer Official Site: $url\n"
proc ModulesHelp { } {
puts stderr "$msg"
}
module-whatis "$msg"
conflict gstreamer
prepend-path PATH ${prefix}/bin
prepend-path LD_LIBRARY_PATH ${prefix}/lib
prepend-path PKG_CONFIG_PATH ${prefix}lib/pkgconfig
#No conflict needed, omit it here.
# Make sure gstreamer-plugins-base/git is loaded
# This was compiled against gstreamer-plugins-base/git
if { ![is-loaded gstreamer-plugins-base/git] } {
module load gstreamer-plugins-base/git
}
# Make sure gstreamer-plugins-good/git is loaded
# This was compiled against gstreamer-plugins-good/git
if { ![is-loaded gstreamer-plugins-good/git] } {
module load gstreamer-plugins-good/git
}
# Make sure gstreamer-plugins-ugly/git is loaded
# This was compiled against gstreamer-plugins-ugly/git
if { ![is-loaded gstreamer-plugins-ugly/git] } {
module load gstreamer-plugins-ugly/git
}
# Make sure gstreamer-plugins-ugly/git is loaded
# This requires gstreamer-plugins-ugly/git
if { ![is-loaded gstreamer-plugins-ugly/git] } {
module load gstreamer-plugins-ugly/git
}
#Make sure gstreamer-libav/git is loaded
#Some plugins require gstreamer-libav/git
if { ![is-loaded gstreamer-libav/git] } {
module load gstreamer-libav/git
}
gstreamer-plugins-base/git modulefile:
module show gstreamer-plugins-base/git
-------------------------------------------------------------------
/usr/share/modules/modulefiles/gstreamer-plugins-base/git:
module-whatis This module adds gstreamer-plugins-base vgit to various paths
Gstreamer Official Site: https://gstreamer.freedesktop.org/
prepend-path PATH /apps/gst-plugins-base/git//bin
prepend-path LD_LIBRARY_PATH /apps/gst-plugins-base/git//lib
prepend-path PKG_CONFIG_PATH /apps/gst-plugins-base/git/lib/pkgconfig
-------------------------------------------------------------------
Content:
#%Module1.0
#####################################################################
##
## gstreamer-plugins-base Modulefile
## by Dennis Mungai on December 30 2016
##
set appname gst-plugins-base
set version git
set prefix /apps/${appname}/${version}/
set url "https://gstreamer.freedesktop.org/"
set msg "This module adds gstreamer-plugins-base v$version to various paths\n\nGstreamer Official Site: $url\n"
proc ModulesHelp { } {
puts stderr "$msg"
}
module-whatis "$msg"
#Omit plugins
prepend-path PATH ${prefix}/bin
prepend-path LD_LIBRARY_PATH ${prefix}/lib
prepend-path PKG_CONFIG_PATH ${prefix}lib/pkgconfig
gstreamer-plugins-good/git modulefile:
module show gstreamer-plugins-good/git
-------------------------------------------------------------------
/usr/share/modules/modulefiles/gstreamer-plugins-good/git:
module-whatis This module adds gstreamer-plugins-good vgit to various paths
Gstreamer Official Site: https://gstreamer.freedesktop.org/
prepend-path PATH /apps/gst-plugins-good/git//bin
prepend-path LD_LIBRARY_PATH /apps/gst-plugins-good/git//lib
prepend-path PKG_CONFIG_PATH /apps/gst-plugins-good/git/lib/pkgconfig
-------------------------------------------------------------------
Module content:
#%Module1.0
#####################################################################
##
## gstreamer-plugins-good Modulefile
## by Dennis Mungai on December 30 2016
##
set appname gst-plugins-good
set version git
set prefix /apps/${appname}/${version}/
set url "https://gstreamer.freedesktop.org/"
set msg "This module adds gstreamer-plugins-good v$version to various paths\n\nGstreamer Official Site: $url\n"
proc ModulesHelp { } {
puts stderr "$msg"
}
module-whatis "$msg"
#No conflict needed
prepend-path PATH ${prefix}/bin
prepend-path LD_LIBRARY_PATH ${prefix}/lib
prepend-path PKG_CONFIG_PATH ${prefix}lib/pkgconfig
gstreamer-plugins-ugly/git module:
module show gstreamer-plugins-ugly/git
-------------------------------------------------------------------
/usr/share/modules/modulefiles/gstreamer-plugins-ugly/git:
module-whatis This module adds gstreamer-plugins-ugly vgit to various paths
Gstreamer Official Site: https://gstreamer.freedesktop.org/
prepend-path PATH /apps/gst-plugins-ugly/git//bin
prepend-path LD_LIBRARY_PATH /apps/gst-plugins-ugly/git//lib
prepend-path PKG_CONFIG_PATH /apps/gst-plugins-ugly/git/lib/pkgconfig
-------------------------------------------------------------------
Content:
#%Module1.0
#####################################################################
##
## gstreamer-plugins-ugly Modulefile
## by Dennis Mungai on December 30 2016
##
set appname gst-plugins-ugly
set version git
set prefix /apps/${appname}/${version}/
set url "https://gstreamer.freedesktop.org/"
set msg "This module adds gstreamer-plugins-ugly v$version to various paths\n\nGstreamer Official Site: $url\n"
proc ModulesHelp { } {
puts stderr "$msg"
}
module-whatis "$msg"
#No conflict needed
prepend-path PATH ${prefix}/bin
prepend-path LD_LIBRARY_PATH ${prefix}/lib
prepend-path PKG_CONFIG_PATH ${prefix}lib/pkgconfig
gstreamer-libav module:
module show gstreamer-libav/git
-------------------------------------------------------------------
/usr/share/modules/modulefiles/gstreamer-libav/git:
module-whatis This module adds gstreamer-plugins-base vgit to various paths
Gstreamer Official Site: https://gstreamer.freedesktop.org/
prepend-path PATH /apps/gstreamer-libav/git//bin
prepend-path LD_LIBRARY_PATH /apps/gstreamer-libav/git//lib
prepend-path PKG_CONFIG_PATH /apps/gstreamer-libav/git/lib/pkgconfig
-------------------------------------------------------------------
Module content:
#%Module1.0
#####################################################################
##
## gstreamer-libav Modulefile
## by Dennis Mungai on December 30 2016
##
set appname gstreamer-libav
set version git
set prefix /apps/${appname}/${version}/
set url "https://gstreamer.freedesktop.org/"
set msg "This module adds gstreamer-plugins-base v$version to various paths\n\nGstreamer Official Site: $url\n"
proc ModulesHelp { } {
puts stderr "$msg"
}
module-whatis "$msg"
#No conflict
prepend-path PATH ${prefix}/bin
prepend-path LD_LIBRARY_PATH ${prefix}/lib
prepend-path PKG_CONFIG_PATH ${prefix}lib/pkgconfig
Now, you've successfully deployed gstreamer in a custom location for use.
Next gist: Building QT5 with this version of gstreamer baked in.
Hi, can I get instructions for this for manjaro gnome?