Installation of MailHog on CentOS 7

mailhog-install.sh

## Install packages
sudo yum install wget curl vim epel-release
sudo yum install daemonize.x86_64

## Install mailhog
wget https://github.com/mailhog/MailHog/releases/download/v0.2.0/MailHog_linux_amd64
sudo chmod +x MailHog_linux_amd64
sudo chown root:root MailHog_linux_amd64
sudo mv MailHog_linux_amd64 /usr/sbin/mailhog

## Install mailhog initd service
wget https://raw.githubusercontent.com/geerlingguy/ansible-role-mailhog/master/templates/mailhog.init.j2
sudo chown root:root mailhog.init.j2
sudo chmod +x mailhog.init.j2
sudo mv mailhog.init.j2 /etc/init.d/mailhog

###  Fix the paths in the mailhog init.d file
sudo vim /etc/init.d/mailhog

## Start mailhog
sudo chkconfig mailhog on
sudo service mailhog start

Running on localhost only uncomment AUTH line and add $AUTH into start and restart for mailhog to handle http auth on localhost:

#!/bin/sh
# /etc/init.d/mailhog
#
# MailHog init script.
#
# @author Jeff Geerling

### BEGIN INIT INFO
# Provides:          mailhog
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start MailHog at boot time.
# Description:       Enable MailHog.
### END INIT INFO

PID=/var/run/mailhog.pid
LOCK=/var/lock/mailhog.lock
USER=nobody
BIN=/usr/sbin/mailhog
DAEMONIZE_BIN=/usr/sbin/daemonize
#AUTH="-auth-file=/etc/mailhog/passwd"
BIND="-ui-bind-addr=127.0.0.1:8025 -api-bind-addr=127.0.0.1:8025"

# Carry out specific functions when asked to by the system
case "$1" in
  start)
    echo "Starting mailhog."
    $DAEMONIZE_BIN -p $PID -l $LOCK -u $USER $BIN $BIND
    ;;
  stop)
    if [ -f $PID ]; then
      echo "Stopping mailhog.";
      kill -TERM $(cat $PID);
      rm -f $PID;
    else
      echo "MailHog is not running.";
    fi
    ;;
  restart)
    echo "Restarting mailhog."
    if [ -f $PID ]; then
      kill -TERM $(cat $PID);
      rm -f $PID;
    fi
    $DAEMONIZE_BIN -p $PID -l $LOCK -u $USER $BIN $BIND
    ;;
  status)
    if [ -f $PID ]; then
      echo "MailHog is running.";
    else
      echo "MailHog is not running.";
      exit 3
    fi
    ;;
  *)
    echo "Usage: /etc/init.d/mailhog {start|stop|status|restart}"
    exit 1
    ;;
esac

exit 0

Putting Apache in front with a virtual host proxying to localhost for SSL support:

Listen 123.456.789.123:8025 https

<VirtualHost 123.456.789.123:8025> 

  ProxyPreserveHost On
  ProxyRequests Off
  ServerName my.domain.com
  ProxyPass / http://127.0.0.1:8025/
  ProxyPassReverse / http://127.0.0.1:8025/

  <Proxy http://127.0.0.1:8025/>
    AuthType Basic
    AuthName "Auth Please"
    AuthUserFile "/path/to/passwd"
    require valid-user
  </Proxy>

  SSLEngine on
  SSLCertificateFile /etc/ssl/certs/cert.crt
  SSLCertificateKeyFile /etc/ssl/certs/cert.key
  SSLCACertificateFile /etc/ssl/certs/cert.cabundle

  ErrorLog /var/log/mailhog.error.log
  CustomLog /var/log/mailhog.access.log combined

</VirtualHost>

I had to change #! /bin/sh to #!/bin/sh for it to work correctly

@richardudovich thanks, fixed my notes above 👍

this doesn't work for CentOS 8. daemonize isn't in the epel-release rpm for it. it's only in the one for CentOS 7. might want to update this script, if it can still work for 8.

@iansebryk this was put together before CentOS 8 was released (2016), I'll update the title to specify the version.

When trying this on CentOS 8 is there any particular part you got stuck on or any specific errors?

yes, i saw that this was done before v8. i just wanted you to know that it wasn't working for current CentOS release. the problem, as i mentioned, is that the yum install daemonize.x86_64 fails. there is no such beast in the v8 repos. and given all the changes in v8, i wasn't confident that manually adding the rpm from v7 would fix the problem without creating more.

if this is something you can easily fix, i'd be most grateful. if there's something i can easily do on my end, i'm equally open to that as well.

I wouldn't install the v7 rpm.. most likely that would end badly unless the package doesn't rely on anything compiled for that version then it may work (not worth the hassle). You could try https://centos.pkgs.org/8/okey-x86_64/daemonize-1.7.8-1.el8.x86_64.rpm.html but that is from a 3rd party repo so you'd need to check who and if you trust them. Alternatively systemd may well have something to replace this by now.

…

On Fri, Jul 17, 2020 at 3:37 PM Ian Sebryk ***@***.***> wrote: ***@***.**** commented on this gist. ------------------------------ yes, i saw that this was done before v8. i just wanted you to know that it wasn't working for current CentOS release. the problem, as i mentioned, is that the yum install daemonize.x86_64 fails. there is no such beast in the v8 repos. and given all the changes in v8, i wasn't confident that manually adding the rpm from v7 would fix the problem without creating more. if this is something you can easily fix, i'd be most grateful. if there's something i can easily do on my end, i'm equally open to that as well. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <https://gist.github.com/ea28bb49baaea86c203407629b442681#gistcomment-3381252>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAKEBZGBRV7MQRGAIWRIPPLR4BO4FANCNFSM4O4ZGZMQ> .

Thinking something like the following may work: https://tuttlem.github.io/2018/02/03/create-a-systemd-daemon.html

oooh. nice find! i'll give that a whirl in the next day or two and keep you posted. thank you. :)

if this is something you can easily fix, i'd be most grateful. if there's something i can easily do on my end, i'm equally open to that as well.