Last active
February 26, 2024 04:16
-
-
Save CarlosGS/b8462a8a1cb69f55d8356cbb0f3a4d63 to your computer and use it in GitHub Desktop.
Fast reading from the raspberry camera with Python, Numpy, and OpenCV. See the comments for more details.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# Fast reading from the raspberry camera with Python, Numpy, and OpenCV | |
# Allows to process grayscale video up to 124 FPS (tested in Raspberry Zero Wifi with V2.1 camera) | |
# | |
# Made by @CarlosGS in May 2017 | |
# Club de Robotica - Universidad Autonoma de Madrid | |
# http://crm.ii.uam.es/ | |
# License: Public Domain, attribution appreciated | |
import cv2 | |
import numpy as np | |
import subprocess as sp | |
import time | |
import atexit | |
frames = [] # stores the video sequence for the demo | |
max_frames = 300 | |
N_frames = 0 | |
# Video capture parameters | |
(w,h) = (640,240) | |
bytesPerFrame = w * h | |
fps = 250 # setting to 250 will request the maximum framerate possible | |
# "raspividyuv" is the command that provides camera frames in YUV format | |
# "--output -" specifies stdout as the output | |
# "--timeout 0" specifies continuous video | |
# "--luma" discards chroma channels, only luminance is sent through the pipeline | |
# see "raspividyuv --help" for more information on the parameters | |
videoCmd = "raspividyuv -w "+str(w)+" -h "+str(h)+" --output - --timeout 0 --framerate "+str(fps)+" --luma --nopreview" | |
videoCmd = videoCmd.split() # Popen requires that each parameter is a separate string | |
cameraProcess = sp.Popen(videoCmd, stdout=sp.PIPE) # start the camera | |
atexit.register(cameraProcess.terminate) # this closes the camera process in case the python scripts exits unexpectedly | |
# wait for the first frame and discard it (only done to measure time more accurately) | |
rawStream = cameraProcess.stdout.read(bytesPerFrame) | |
print("Recording...") | |
start_time = time.time() | |
while True: | |
cameraProcess.stdout.flush() # discard any frames that we were not able to process in time | |
# Parse the raw stream into a numpy array | |
frame = np.fromfile(cameraProcess.stdout, count=bytesPerFrame, dtype=np.uint8) | |
if frame.size != bytesPerFrame: | |
print("Error: Camera stream closed unexpectedly") | |
break | |
frame.shape = (h,w) # set the correct dimensions for the numpy array | |
# The frame can be processed here using any function in the OpenCV library. | |
# Full image processing will slow down the pipeline, so the requested FPS should be set accordingly. | |
#frame = cv2.Canny(frame, 50,150) | |
# For instance, in this example you can enable the Canny edge function above. | |
# You will see that the frame rate drops to ~35fps and video playback is erratic. | |
# If you then set fps = 30 at the beginning of the script, there will be enough cycle time between frames to provide accurate video. | |
# One optimization could be to work with a decimated (downscaled) version of the image: deci = frame[::2, ::2] | |
frames.append(frame) # save the frame (for the demo) | |
#del frame # free the allocated memory | |
N_frames += 1 | |
if N_frames > max_frames: break | |
end_time = time.time() | |
cameraProcess.terminate() # stop the camera | |
elapsed_seconds = end_time-start_time | |
print("Done! Result: "+str(N_frames/elapsed_seconds)+" fps") | |
print("Writing frames to disk...") | |
out = cv2.VideoWriter("slow_motion.avi", cv2.cv.CV_FOURCC(*"MJPG"), 30, (w,h)) | |
for n in range(N_frames): | |
#cv2.imwrite("frame"+str(n)+".png", frames[n]) # save frame as a PNG image | |
frame_rgb = cv2.cvtColor(frames[n],cv2.COLOR_GRAY2RGB) # video codec requires RGB image | |
out.write(frame_rgb) | |
out.release() | |
print("Display frames with OpenCV...") | |
for frame in frames: | |
cv2.imshow("Slow Motion", frame) | |
cv2.waitKey(1) # request maximum refresh rate | |
cv2.destroyAllWindows() | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
For resolution of 640x480 etc, the frames seem to get cropped to a smaller area at FPS above 40. This seems to be an issue after an update since it was working ok before the update.
1280x720 : Image ok & not cropped - fps at capped at ~50
960x480: Image ok & not cropped - fps at capped at ~50
640x480: Image cropped - fps at 120
640x480: Image NOT cropped - fps at 30
320x240: Image cropped - fps at 120
320x240: Image NOT cropped - fps at 30
Any idea how to get the full image instead of the cropped image at 640x480 back? Thanks.