| Preface: | |
| I have no idea if any of this is the "right" way of doing it. This is just how I got my unit working. | |
| Good luck. | |
| WARNING: Do not use a V1 Waveshare display module with a stock pwnagotchi! The pwnagotchi expects a V2 module, and may irreparably damage a V1 module! | |
| A V1 display module *can* work, but you must modify `waveshare.py` and `display.py` beforehand. For the time being, this is left as an exercise for the reader. | |
| If you have already burnt a V1 display, try disconnecting it from the Pi and leaving it overnight. This may rejuvenate the display somewhat, but it will likely still display signs of damage. | |
| Installation: | |
| 1. `dd` Raspbian Lite to an SD card. |
extension_id=jifpbeccnghkjeaalbbjmodiffmgedin # change this ID
curl -L -o "$extension_id.zip" "https://clients2.google.com/service/update2/crx?response=redirect&os=mac&arch=x86-64&nacl_arch=x86-64&prod=chromecrx&prodchannel=stable&prodversion=44.0.2403.130&x=id%3D$extension_id%26uc"
unzip -d "$extension_id-source" "$extension_id.zip"Thx to crxviewer for the magic download URL.