iis_update_tls_1.2.ps1

# This script provides support for Transport Layer Security (TLS) 1.1 and TLS 1.2 
# in Windows Server 2012, Windows 7 Service Pack 1 (SP1), and Windows Server 2008 R2 SP1.

# Reference Doc: https://support.microsoft.com/en-us/topic/update-to-enable-tls-1-1-and-tls-1-2-as-default-secure-protocols-in-winhttp-in-windows-c4bd73d2-31d7-761e-0178-11268bb10392


# for the Cipher Suites Support documentation go to
# https://docs.microsoft.com/en-us/windows/desktop/SecAuthN/cipher-suites-in-schannel




# -- CHANGES 2023 -- #
# Check to ensure we are running as Administrator first?



Write-Host 'Backup Registry before making changes...'
Write-Host '--------------------------------------------------------------------------------'


# Backup the registry first in case of problems so we can revert





Write-Host 'Configuring IIS with SSL/TLS Deployment Best Practices...'
Write-Host '--------------------------------------------------------------------------------'

# Disable Multi-Protocol Unified Hello
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'Multi-Protocol Unified Hello has been disabled.'
 
# Disable PCT 1.0
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'PCT 1.0 has been disabled.'
 
# Disable SSL 2.0 (PCI Compliance)
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'SSL 2.0 has been disabled.'
 
# NOTE: If you disable SSL 3.0 the you may lock out some people still using Windows XP
# with IE6/7. Without SSL 3.0 enabled, there is no protocol available
# for these people to fall back. Safer shopping certifications may require that
# you disable SSLv3.
#
# Disable SSL 3.0 (PCI Compliance) and enable "Poodle" protection
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'SSL 3.0 has been disabled.'

# Get OS version
$os = Get-WmiObject -class Win32_OperatingSystem

# v6.3 = Server 2012 R2, so if current server OS is a version below that value, check for this 
# patch being present before we try to do any TLS reconfiguring
if ([System.Version]$os.Version -lt [System.Version]'6.3') {
  Write-Host "`n`nmake sure you have installed KB 3080079`n https://support.microsoft.com/en-us/help/3080079/update-to-add-rds-support-for-tls-1-1-and-tls-1-2-in-windows-7-or-wind"
  Write-Host -nonewline "Continue? (Y/N) "
  $response = Read-Host
  if ( $response -ne "Y" ) { exit }
}

# -- CHANGES 2023 -- #
# Disable TLS 1.0 for client and server SCHANNEL communications
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server' -name 'Enabled' -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client' -name 'Enabled' -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'TLS 1.0 has been disabled.'

# -- CHANGES 2023 -- #
# Disable TLS 1.1 for client and server SCHANNEL communications
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server' -name 'Enabled' -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client' -name 'Enabled' -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'TLS 1.1 has been disabled.'

# Add and Enable TLS 1.2 for client and server SCHANNEL communications
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'TLS 1.2 has been enabled.'

# Re-create the ciphers key
New-Item 'HKLM:SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers' -Force | Out-Null

# Disable insecure/weak ciphers.
$insecureCiphers = @(
  'DES 56/56',
  'NULL',
  'RC2 128/128',
  'RC2 40/128',
  'RC2 56/128',
  'RC4 40/128',
  'RC4 56/128',
  'RC4 64/128',
  'RC4 128/128',
  'Triple DES 168'
)

Foreach ($insecureCipher in $insecureCiphers) {
  $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers', $true).CreateSubKey($insecureCipher)
  $key.SetValue('Enabled', 0, 'DWord')
  $key.close()
  Write-Host "Weak cipher $insecureCipher has been disabled."
}

# Enable new secure ciphers
# - RC4: It is recommended to disable RC4, but you may lock out WinXP/IE8 if you enforce this. This is a requirement for FIPS 140-2.
# - 3DES: It is recommended to disable these in near future. This is the last cipher supported by Windows XP.
# - Windows Vista and before 'Triple DES 168' was named 'Triple DES 168/168' per https://support.microsoft.com/en-us/kb/245030
# - Disable Triple DES 168: https://www.techtarget.com/searchsecurity/tip/Expert-advice-Encryption-101-Triple-DES-explained
$secureCiphers = @(
  'AES 128/128',
  'AES 256/256'
#   'Triple DES 168'
)

Foreach ($secureCipher in $secureCiphers) {
  $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers', $true).CreateSubKey($secureCipher)
  New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\$secureCipher" -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
  $key.close()
  Write-Host "Strong cipher $secureCipher has been enabled."
}

# Set hashes configuration
# -- CHANGES 2023 -- # - Added backslash here it was missing before SYSTEM and put quotes around 'Enabled'
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\MD5' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\MD5' -name 'Enabled' -value 0 -PropertyType 'DWord' -Force | Out-Null
 
$secureHashes = @(
  'SHA',
  'SHA256',
  'SHA384',
  'SHA512'
)

Foreach ($secureHash in $secureHashes) {
  $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes', $true).CreateSubKey($secureHash)
  New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\$secureHash" -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
  $key.close()
  Write-Host "Hash $secureHash has been enabled."
}

# Set KeyExchangeAlgorithms configuration
New-Item 'HKLM:SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms' -Force | Out-Null
$secureKeyExchangeAlgorithms = @(
  'Diffie-Hellman',
  'ECDH',
  'PKCS'
)
Foreach ($secureKeyExchangeAlgorithm in $secureKeyExchangeAlgorithms) {
  $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms', $true).CreateSubKey($secureKeyExchangeAlgorithm)
  New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\$secureKeyExchangeAlgorithm" -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
  $key.close()
  Write-Host "KeyExchangeAlgorithm $secureKeyExchangeAlgorithm has been enabled."
}

# -- CHANGES 2023 -- #
# Enable Longer DH Key Size (default is 1024 and too weak)
# MS Security Advisory: https://learn.microsoft.com/en-us/security-updates/securityadvisories/2016/3174644
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\Diffie-Hellman' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\Diffie-Hellman' -name 'ServerMinKeyBitLength' -value '2048' -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\Diffie-Hellman" -name 'ClientMinKeyBitLength' -value '2048' -PropertyType 'DWord' -Force | Out-Null
Write-Host "Configured secure default key length of 2048 for Diffie-Hellman key shares (previously 1024)"

# https://support.microsoft.com/en-us/help/3174644/microsoft-security-advisory-updated-support-for-diffie-hellman-key-exc
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\PKCS' -Force | Out-Null
New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\PKCS" -name 'ClientMinKeyBitLength' -value '2048' -PropertyType 'DWord' -Force | Out-Null

# -- CHANGES 2023 -- #
# Set cipher suites order as secure as possible (Enables Perfect Forward Secrecy)
# NOTE: PFS does have a noticeable effect on system performance in some scenarios due to its higher computing requirements.
# Server owners may need to test for an increase in resource consumption when number of TLS connections scales up.
if ([System.Version]$os.Version -lt [System.Version]'10.0') {
  Write-Host 'Use cipher suites order for Windows 2008_R2/2012/2012_R2'
  $cipherSuitesOrder = @(
    'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P256',
    'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P384',
    'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P521',
    'TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384_P384',
    'TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384_P521',
    # Commenting all these out, as CBC ciphers are now considered weak
    # 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P256',
    # 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P384',
    # 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P521',
    # 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P256',
    # 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P384',
    # 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P521',
    # 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P256',
    # 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P384',
    # 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P521',
    # 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384_P384',
    # 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384_P521',
    # 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P256',
    # 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P384',
    # 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P521',
    # 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P256',
    # 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P384',
    # 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P521',
    # 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256',
    # 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P384',
    # 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P521',
    # 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P256',
    # 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P384',
    # 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P521'
    # -- End of commenting out, adding these
    # Adding these in which are not shown as vulnerable based on sslyze scan results
    'TLS_DHE_RSA_WITH_AES_256_GCM_SHA384',
    'TLS_DHE_RSA_WITH_AES_128_GCM_SHA256',
    # Below are the only AEAD ciphers available on Windows 2012R2 and earlier.
    # - RSA certificates need below ciphers, but ECDSA certificates (EV) may not.
    # - We get penalty for not using AEAD suites with RSA certificates.
    'TLS_RSA_WITH_AES_256_GCM_SHA384',
    'TLS_RSA_WITH_AES_128_GCM_SHA256',
    'TLS_RSA_WITH_AES_256_CBC_SHA256',
    'TLS_RSA_WITH_AES_128_CBC_SHA256',
    'TLS_RSA_WITH_AES_256_CBC_SHA',
    'TLS_RSA_WITH_AES_128_CBC_SHA'
  )
}
else {
  Write-Host 'Use cipher suites order for Windows 10/11/2016 and later.'
  $cipherSuitesOrder = @(
    'TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384',
    'TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256',
    # Commenting some of these, but need to keep a few that are weak, but not "insecure" at this time
    'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384',
    'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256',
    # 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA',
    # 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA',
    'TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384',
    'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256'
    #'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384',
    #'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256',
    #'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA',
    #'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA',
    # If we have issues due to an RSA cert, we can try re-enabling these 2 while troubleshooting
    #'TLS_RSA_WITH_AES_256_GCM_SHA384',
    #'TLS_RSA_WITH_AES_128_GCM_SHA256'
  )
}
# NOTE: For future use, these are the secure ciphers used if we are configuring for TLS 1.3, in this order
# TLS_AES_256_GCM_SHA384
# TLS_CHACHA20_POLY1305_SHA256
# TLS_AES_128_GCM_SHA256
# TLS_AES_128_CCM_8_SHA256
# TLS_AES_128_CCM_SHA256

# Windows requires this list to be comma-separated. Also, the whole string can be no more than 1,023 characters
$cipherSuitesAsString = [string]::join(',', $cipherSuitesOrder)
# -- End of my changes -- #

New-Item 'HKLM:\SOFTWARE\Policies\Microsoft\Cryptography\Configuration\SSL\00010002' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SOFTWARE\Policies\Microsoft\Cryptography\Configuration\SSL\00010002' -name 'Functions' -value $cipherSuitesAsString -PropertyType 'String' -Force | Out-Null


# Set TLS_FALLBACK_SCSV
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL' -name UseScsvForTls -value 1 -PropertyType 'DWord' -Force | Out-Null

# Set AllowInsecureRenegoation to disabled
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL' -name AllowInsecureRenegoClients -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL' -name AllowInsecureRenegoServers -value 0 -PropertyType 'DWord' -Force | Out-Null

Write-Host '--------------------------------------------------------------------------------'
Write-Host 'NOTE: After the system has been rebooted you can verify your server'
Write-Host '      configuration at https://www.ssllabs.com/ssltest/'
Write-Host "--------------------------------------------------------------------------------`n"

Write-Host -ForegroundColor Red 'A computer restart is required to apply settings. When able, restart your server for this change to take affect'
# Restart-Computer -Force -Confirm