Last active
September 17, 2018 16:51
-
-
Save CelliesProjects/873c4a1fdbdb1d1311fc04a4bc40d68b to your computer and use it in GitHub Desktop.
Simple example sketch for ESP32 WROVER kit to use HW SPI at 80Mhz.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /* Modified to show HW SPI at 80Mhz from ESP32 ESP-WROVER-KIT by Cellie */ | |
| /*************************************************** | |
| Modified graphics demo for the ESP-WROVER-KIT and equivalent | |
| projects using Ardiono-ESP32 with an ILI9341 LCD display | |
| By Martin Falatic | |
| ****************************************************/ | |
| /*************************************************** | |
| This is our GFX example for the Adafruit ILI9341 Breakout and Shield | |
| ----> http://www.adafruit.com/products/1651 | |
| Check out the links above for our tutorials and wiring diagrams | |
| These displays use SPI to communicate, 4 or 5 pins are required to | |
| interface (RST is optional) | |
| Adafruit invests time and resources providing this open source code, | |
| please support Adafruit and open-source hardware by purchasing | |
| products from Adafruit! | |
| Written by Limor Fried/Ladyada for Adafruit Industries. | |
| MIT license, all text above must be included in any redistribution | |
| ****************************************************/ | |
| #include "SPI.h" | |
| #include "Adafruit_GFX.h" | |
| #include "Adafruit_ILI9341.h" | |
| // For the ESP-WROVER_KIT, these are the default. | |
| #define TFT_CS 22 | |
| #define TFT_DC 21 | |
| #define TFT_MOSI 23 | |
| #define TFT_CLK 19 | |
| #define TFT_RST 18 | |
| #define TFT_MISO 25 | |
| #define TFT_LED 5 // GPIO not managed by library | |
| Adafruit_ILI9341 tft = Adafruit_ILI9341( TFT_CS, TFT_DC, TFT_RST ); | |
| void backlighting(bool state) { | |
| if (state) { | |
| digitalWrite(TFT_LED, LOW); | |
| } | |
| else { | |
| digitalWrite(TFT_LED, HIGH); | |
| } | |
| } | |
| void setup() { | |
| Serial.begin(115200); | |
| Serial.println("ILI9341 Test!"); | |
| SPI.begin( TFT_CLK, TFT_MISO, TFT_MOSI ); | |
| tft.begin( 26000000, SPI ); | |
| pinMode(TFT_LED, OUTPUT); | |
| backlighting(true); | |
| // read diagnostics (optional but can help debug problems) | |
| uint8_t x = tft.readcommand8(ILI9341_RDMODE); | |
| Serial.print("Display Power Mode: 0x"); Serial.println(x, HEX); | |
| x = tft.readcommand8(ILI9341_RDMADCTL); | |
| Serial.print("MADCTL Mode: 0x"); Serial.println(x, HEX); | |
| x = tft.readcommand8(ILI9341_RDPIXFMT); | |
| Serial.print("Pixel Format: 0x"); Serial.println(x, HEX); | |
| x = tft.readcommand8(ILI9341_RDIMGFMT); | |
| Serial.print("Image Format: 0x"); Serial.println(x, HEX); | |
| x = tft.readcommand8(ILI9341_RDSELFDIAG); | |
| Serial.print("Self Diagnostic: 0x"); Serial.println(x, HEX); | |
| } | |
| void loop(void) { | |
| Serial.println(F("Benchmark Time (microseconds)")); | |
| delay(10); | |
| Serial.print(F("Screen fill ")); | |
| Serial.println(testFillScreen()); | |
| delay(500); | |
| for(uint8_t rotation=0; rotation<4; rotation++) { | |
| Serial.print(F("Text (rotation=")); | |
| Serial.print(rotation); | |
| Serial.print(F(") ")); | |
| tft.setRotation(rotation); | |
| Serial.println(testText()); | |
| delay(1000); | |
| } | |
| Serial.print(F("Lines ")); | |
| Serial.println(testLines(ILI9341_CYAN)); | |
| delay(500); | |
| Serial.print(F("Horiz/Vert Lines ")); | |
| Serial.println(testFastLines(ILI9341_RED, ILI9341_BLUE)); | |
| delay(500); | |
| Serial.print(F("Rectangles (outline) ")); | |
| Serial.println(testRects(ILI9341_GREEN)); | |
| delay(500); | |
| Serial.print(F("Rectangles (filled) ")); | |
| Serial.println(testFilledRects(ILI9341_YELLOW, ILI9341_MAGENTA)); | |
| delay(500); | |
| Serial.print(F("Circles (filled) ")); | |
| Serial.println(testFilledCircles(10, ILI9341_MAGENTA)); | |
| Serial.print(F("Circles (outline) ")); | |
| Serial.println(testCircles(10, ILI9341_WHITE)); | |
| delay(500); | |
| Serial.print(F("Triangles (outline) ")); | |
| Serial.println(testTriangles()); | |
| delay(500); | |
| Serial.print(F("Triangles (filled) ")); | |
| Serial.println(testFilledTriangles()); | |
| delay(500); | |
| Serial.print(F("Rounded rects (outline) ")); | |
| Serial.println(testRoundRects()); | |
| delay(500); | |
| Serial.print(F("Rounded rects (filled) ")); | |
| Serial.println(testFilledRoundRects()); | |
| delay(500); | |
| Serial.println(F("Done!")); | |
| Serial.println(); | |
| delay(3000); | |
| } | |
| unsigned long testFillScreen() { | |
| unsigned long start = micros(); | |
| tft.fillScreen(ILI9341_BLACK); | |
| yield(); | |
| tft.fillScreen(ILI9341_RED); | |
| yield(); | |
| tft.fillScreen(ILI9341_GREEN); | |
| yield(); | |
| tft.fillScreen(ILI9341_BLUE); | |
| yield(); | |
| tft.fillScreen(ILI9341_BLACK); | |
| yield(); | |
| return micros() - start; | |
| } | |
| unsigned long testText() { | |
| tft.fillScreen(ILI9341_BLACK); | |
| unsigned long start = micros(); | |
| tft.setCursor(0, 0); | |
| tft.setTextColor(ILI9341_WHITE); tft.setTextSize(1); | |
| tft.println("Hello World!"); | |
| tft.setTextColor(ILI9341_YELLOW); tft.setTextSize(2); | |
| tft.println(1234.56); | |
| tft.setTextColor(ILI9341_RED); tft.setTextSize(3); | |
| tft.println(0xDEADBEEF, HEX); | |
| tft.println(); | |
| tft.setTextColor(ILI9341_GREEN); | |
| tft.setTextSize(5); | |
| tft.println("Groop"); | |
| tft.setTextSize(2); | |
| tft.println("I implore thee,"); | |
| tft.setTextSize(1); | |
| tft.println("my foonting turlingdromes."); | |
| tft.println("And hooptiously drangle me"); | |
| tft.println("with crinkly bindlewurdles,"); | |
| tft.println("Or I will rend thee"); | |
| tft.println("in the gobberwarts"); | |
| tft.println("with my blurglecruncheon,"); | |
| tft.println("see if I don't!"); | |
| return micros() - start; | |
| } | |
| unsigned long testLines(uint16_t color) { | |
| unsigned long start, t; | |
| int x1, y1, x2, y2, | |
| w = tft.width(), | |
| h = tft.height(); | |
| tft.fillScreen(ILI9341_BLACK); | |
| yield(); | |
| x1 = y1 = 0; | |
| y2 = h - 1; | |
| start = micros(); | |
| for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color); | |
| x2 = w - 1; | |
| for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color); | |
| t = micros() - start; // fillScreen doesn't count against timing | |
| yield(); | |
| tft.fillScreen(ILI9341_BLACK); | |
| yield(); | |
| x1 = w - 1; | |
| y1 = 0; | |
| y2 = h - 1; | |
| start = micros(); | |
| for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color); | |
| x2 = 0; | |
| for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color); | |
| t += micros() - start; | |
| yield(); | |
| tft.fillScreen(ILI9341_BLACK); | |
| yield(); | |
| x1 = 0; | |
| y1 = h - 1; | |
| y2 = 0; | |
| start = micros(); | |
| for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color); | |
| x2 = w - 1; | |
| for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color); | |
| t += micros() - start; | |
| yield(); | |
| tft.fillScreen(ILI9341_BLACK); | |
| yield(); | |
| x1 = w - 1; | |
| y1 = h - 1; | |
| y2 = 0; | |
| start = micros(); | |
| for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color); | |
| x2 = 0; | |
| for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color); | |
| yield(); | |
| return micros() - start; | |
| } | |
| unsigned long testFastLines(uint16_t color1, uint16_t color2) { | |
| unsigned long start; | |
| int x, y, w = tft.width(), h = tft.height(); | |
| tft.fillScreen(ILI9341_BLACK); | |
| start = micros(); | |
| for(y=0; y<h; y+=5) tft.drawFastHLine(0, y, w, color1); | |
| for(x=0; x<w; x+=5) tft.drawFastVLine(x, 0, h, color2); | |
| return micros() - start; | |
| } | |
| unsigned long testRects(uint16_t color) { | |
| unsigned long start; | |
| int n, i, i2, | |
| cx = tft.width() / 2, | |
| cy = tft.height() / 2; | |
| tft.fillScreen(ILI9341_BLACK); | |
| n = min(tft.width(), tft.height()); | |
| start = micros(); | |
| for(i=2; i<n; i+=6) { | |
| i2 = i / 2; | |
| tft.drawRect(cx-i2, cy-i2, i, i, color); | |
| } | |
| return micros() - start; | |
| } | |
| unsigned long testFilledRects(uint16_t color1, uint16_t color2) { | |
| unsigned long start, t = 0; | |
| int n, i, i2, | |
| cx = tft.width() / 2 - 1, | |
| cy = tft.height() / 2 - 1; | |
| tft.fillScreen(ILI9341_BLACK); | |
| n = min(tft.width(), tft.height()); | |
| for(i=n; i>0; i-=6) { | |
| i2 = i / 2; | |
| start = micros(); | |
| tft.fillRect(cx-i2, cy-i2, i, i, color1); | |
| t += micros() - start; | |
| // Outlines are not included in timing results | |
| tft.drawRect(cx-i2, cy-i2, i, i, color2); | |
| yield(); | |
| } | |
| return t; | |
| } | |
| unsigned long testFilledCircles(uint8_t radius, uint16_t color) { | |
| unsigned long start; | |
| int x, y, w = tft.width(), h = tft.height(), r2 = radius * 2; | |
| tft.fillScreen(ILI9341_BLACK); | |
| start = micros(); | |
| for(x=radius; x<w; x+=r2) { | |
| for(y=radius; y<h; y+=r2) { | |
| tft.fillCircle(x, y, radius, color); | |
| } | |
| } | |
| return micros() - start; | |
| } | |
| unsigned long testCircles(uint8_t radius, uint16_t color) { | |
| unsigned long start; | |
| int x, y, r2 = radius * 2, | |
| w = tft.width() + radius, | |
| h = tft.height() + radius; | |
| // Screen is not cleared for this one -- this is | |
| // intentional and does not affect the reported time. | |
| start = micros(); | |
| for(x=0; x<w; x+=r2) { | |
| for(y=0; y<h; y+=r2) { | |
| tft.drawCircle(x, y, radius, color); | |
| } | |
| } | |
| return micros() - start; | |
| } | |
| unsigned long testTriangles() { | |
| unsigned long start; | |
| int n, i, cx = tft.width() / 2 - 1, | |
| cy = tft.height() / 2 - 1; | |
| tft.fillScreen(ILI9341_BLACK); | |
| n = min(cx, cy); | |
| start = micros(); | |
| for(i=0; i<n; i+=5) { | |
| tft.drawTriangle( | |
| cx , cy - i, // peak | |
| cx - i, cy + i, // bottom left | |
| cx + i, cy + i, // bottom right | |
| tft.color565(i, i, i)); | |
| } | |
| return micros() - start; | |
| } | |
| unsigned long testFilledTriangles() { | |
| unsigned long start, t = 0; | |
| int i, cx = tft.width() / 2 - 1, | |
| cy = tft.height() / 2 - 1; | |
| tft.fillScreen(ILI9341_BLACK); | |
| start = micros(); | |
| for(i=min(cx,cy); i>10; i-=5) { | |
| start = micros(); | |
| tft.fillTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i, | |
| tft.color565(0, i*10, i*10)); | |
| t += micros() - start; | |
| tft.drawTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i, | |
| tft.color565(i*10, i*10, 0)); | |
| yield(); | |
| } | |
| return t; | |
| } | |
| unsigned long testRoundRects() { | |
| unsigned long start; | |
| int w, i, i2, | |
| cx = tft.width() / 2 - 1, | |
| cy = tft.height() / 2 - 1; | |
| tft.fillScreen(ILI9341_BLACK); | |
| w = min(tft.width(), tft.height()); | |
| start = micros(); | |
| for(i=0; i<w; i+=6) { | |
| i2 = i / 2; | |
| tft.drawRoundRect(cx-i2, cy-i2, i, i, i/8, tft.color565(i, 0, 0)); | |
| } | |
| return micros() - start; | |
| } | |
| unsigned long testFilledRoundRects() { | |
| unsigned long start; | |
| int i, i2, | |
| cx = tft.width() / 2 - 1, | |
| cy = tft.height() / 2 - 1; | |
| tft.fillScreen(ILI9341_BLACK); | |
| start = micros(); | |
| for(i=min(tft.width(), tft.height()); i>20; i-=6) { | |
| i2 = i / 2; | |
| tft.fillRoundRect(cx-i2, cy-i2, i, i, i/8, tft.color565(0, i, 0)); | |
| yield(); | |
| } | |
| return micros() - start; | |
| } |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment