ChainsDD

[led_effect case_off]
leds:
    neopixel:my_neopixel (1-16)
layers:
    static 0 0 top (0,0,0)

[led_effect bed_off]
leds:
    neopixel:my_neopixel (17)
layers:

ChainsDD

[gcode_macro END_PRINT]
gcode:
  {% set th = printer.toolhead %}
  {% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
  {% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
  {% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
  SAVE_GCODE_STATE NAME=STATE_PRINT_END
  
  M400
  G92 E0

ChainsDD

[temperature_sensor pi]
sensor_type: temperature_host
sensor_path: /sys/class/thermal/thermal_zone0/temp

[temperature_sensor mcu]
sensor_type: temperature_mcu

ChainsDD

[idle_timeout]
gcode:
  TURN_OFF_HEATERS
  M84
  M106 S0
  BED_LIGHT_OFF

[homing_override]
set_position_z: 0
gcode:

ChainsDD

private _type =
	switch(toLower _difficulty) do
	{
		case "contamination":
		{
			"ExileContaminationZone";
		};
		default
		{
			_markerType;

ChainsDD

		case "hardcore":
		{
			_markerType = "ExileMissionHardcoreIcon";
			"ColorBlack"
		};
		case "contamination":
		{
			_markerIcon = "ExileContaminationZone";
			"ColorRed"
		};

ChainsDD

class RedditLink(
        val author: String,
        val likes: RedditLikes,
        val title: String,
        val score: Int
)

enum class RedditLikes {
    UP, DOWN, NONE
}