Rajas Paranjpe ChocolateLoverRaj

Install Magisk via Sideload

💻 => the device running adb (usually a PC)
📱 => the device where Magisk is going to be installed (usually a Phone or Tablet)

📱 Install Magisk App
💻 Download Magisk
💻 Rename .apk to .zip
💻 Reboot device in Sideload mode
💻 Sideload Magisk

Un día, Jojo recibío un chantaje.

Dame todos tu dinero

Por que?

Tengo un cuchillo.

Por que?

Pure ESM package

The package that linked you here is now pure ESM. It cannot be require()'d from CommonJS.

This means you have the following choices:

Use ESM yourself. (preferred)
Use import foo from 'foo' instead of const foo = require('foo') to import the package. You also need to put "type": "module" in your package.json and more. Follow the below guide.
If the package is used in an async context, you could use await import(…) from CommonJS instead of require(…).
Stay on the existing version of the package until you can move to ESM.

rclone systemd service

Preparation

This service will use the same remote name you specified when using rclone config create. If you haven't done that yet, do so now.

Next, create the mountpoint for your remote. The service uses the location ~/mnt/<remote> by default.

mkdir ~/mnt/dropbox

Connecting to an Android device over SSH

Initial Setup

Install Android App Termux from APKPure or AppStore. If the app exists, just delete and re-install it to get the latest version, The APK can be downloaded from https://apkpure.com/termux/com.termux/ Install the APK using by running

adb install ~/Downloads/Termux_v0.73_apkpure.com.apk

If you installed your #ubuntu with full-disk #encryption a while, you may want to upgrade your #luks header version to enjoy improved #security and stronger password hashing algorithms.

Boot from USB

You can't change LUKS header from a live system - you need to boot a live Ubuntu USB to be able to access the encrypted partition. First, create a bootable USB stick using a regular Ubuntu installer image.

Just get the latest installer ISO available
You need the full installer, the mini network installer won't work
You may need to disable Secure Boot in BIOS temporarily to boot from USB

Setting Up Node.js On Raspberry Pi

There are several ways that you can set up Node.js on a Raspberry Pi when running Raspbian/Rapberry Pi OS. Depending on your needs, the version of the RPi that you're using, and how you like to manage installs, you have a lot of options.

Node.js from source

Do not do this if you can avoid it, it's super slow. If you insist on doing it and have the time, you can start at https://nodejs.org. But really, don't do this.

If you have tons of time on your hands, don't need Node anytime soon, and insist on building from source for some reason, here's a guide you can try out that covers building Node.js on an ARMv6 Raspberry Pi.

Side note: unless you have a need for the latest and greatest features, I recommend developing using the most recent Long Term Support (LTS) version of Node available, especially for anything you plan to put into production for any length of time.

	/*
	* Very simple test runner for nodejs:
	*
	* Supports:
	*
	* before, after, beforeAll, afterAll
	* fixture object passed to each test, that before/after/beforeAll/afterAll can modify
	* -[t]est option on command line to pick tests to run
	* -[l]inear option on command to disable parallel
	* built in fixture logger, captures log lines, adds line numbers/file names/timestamps

	#!/usr/bin/env sh

	_install_vsc() {
	echo "Re-entering chroot to complete installation..."
	sudo enter-chroot -n ${1} sudo -S sh -c "curl -L https://go.microsoft.com/fwlink/?LinkID=760865 > /tmp/code-insiders.deb; sudo dpkg -i /tmp/code-insiders.deb; sudo apt-get install -f; rm /tmp/code-insiders.deb;";
	if [ $? -eq 0 ]; then
	echo "Code install script complete.";
	else
	echo "Code install script failed.";
	exit 1;

	[void][Windows.Networking.Connectivity.NetworkInformation, Windows, ContentType = WindowsRuntime]
	$cost = [Windows.Networking.Connectivity.NetworkInformation]::GetInternetConnectionProfile().GetConnectionCost()
	$cost.ApproachingDataLimit -or $cost.OverDataLimit -or $cost.Roaming -or $cost.BackgroundDataUsageRestricted -or ($cost.NetworkCostType -ne "Unrestricted")