rfxcom control

control.sh

#!/bin/sh

rfxcmd="/root/rfx-program/rfxcmd/rfxcmd.py"
#serial=`find /dev/serial/by-id -type l`
serial="/dev/ttyUSB0"

# Beamer (Kingpin)
#09130011E1428041000
#             xxxx - 1040 timing/pulse in hex
#           xx - Command (24/stop 22/up 28/down)
#      xx - sequence number
# Somfy's
#0C1A0015010203010300000000
#                xx - Command (00/stop 01/up 03/down)
#            xx - ID
#          xx - ID
#        xx - ID
#      xx - sequence number

# rfx_subtype_1A_cmnd = {
# "00":"Stop",
# "01":"Up",
# "02":"Up+Stop (Set upper limit)",
# "03":"Down",
# "04":"Down+Stop (Set lower limit)",
# "05":"Up+Down (Connect motor)",
# "07":"Program",
# "08":"Program > 2 seconds",
# "09":"Program > 7 seconds",
# "0A":"Stop > 2 seconds (Set position / Change direction)",
# "0B":"Stop > 5 seconds (Set middle position)",
# "0C":"Up+Down > 5 seconds (Change upper position)",
# "0D":"Erase this RTS remote from RFXtrx",
# "0E":"Erase all RTS remotes from the RFXtrx"}

sfirst="0C1A0015"
slast="00000000"
sunknown="01"
kfirst="09130011E142"
klast="041000"

case $1 in
        "up")   scmd="01"
                kcmd="22"
                ;;
        "down") scmd="03"
                kcmd="28"
                ;;
        "stop") scmd="00"
                kcmd="24"
                ;;
        "prog") scmd="07"
                kcmd="00"
                ;;
        "learn")
                scmd="08"
                kcmd="00"
                ;;
        *)
                echo "Not sure what to do call me as: $0 {up/down/stop/prog/learn} {id} and I will program 0102{$id}"
                exit
                ;;
esac

id="0102${2}"
type="somfy"

s_string="${sfirst}${id}${sunknown}${scmd}${slast}"
k_string="${kfirst}${kcmd}${klast}"

case $type in
        "somfy")        string=${s_string}
                        ${rfxcmd} -d ${serial} -s ${string}
                        ;;
        *)
                echo "Not sure what to do"
                exit
                ;;
esac

rfxcmd

See //github.com/digiltd/rfxcmd.git

HA id will be 071a0000001 (instead of the script using 0C1A0015)