| From c814d07190a645dcce33e4407c6f6d8bb7ebaef2 Mon Sep 17 00:00:00 2001 | |
| From: Aleksandrs Vinarskis <[email protected]> | |
| Date: Tue, 12 Dec 2023 20:52:43 +0100 | |
| Subject: [PATCH 1/1] ALSA: hda: cs35l41: Dell Fiorano add missing _DSD properties | |
| Dell XPS 9530 (2023) has two SPI connected CS35L41 amplifiers, however | |
| is missing _DSD properties, cs-gpios and has a firmware bug which caps SPI | |
| controller's speed to unusable 3051Hz. This patch adds _DSD properties and | |
| sets second cs-gpio. In case SPI speed bug is detected, it will not | |
| initialize the device to avoid hangs on wake up. |
| substitutions: | |
| device_name: "lush-cover-controller" | |
| pulley_diameter_mm: "21.963" | |
| gear_ratio: "1880/2000" | |
| distance_mm: "2050" | |
| acceleration: 500 steps/s^2 | |
| velocity: 2500 steps/s # 200 (motor steps) * ${microsteps} | |
| back_off_steps: "200" # back off some steps to reduce stepper energize noise | |
| open_current_x: 1000ma |
| --- | |
| apiVersion: v1 | |
| kind: Secret | |
| metadata: | |
| name: mysql-recorder-pass | |
| namespace: homeassistant | |
| type: Opaque | |
| data: | |
| password: <REDACTED> | |
| --- |
| substitutions: | |
| device_name: edit-name | |
| pulley_diameter_mm: "15" # 1 turn about 47 mm | |
| gear_ratio: "1" # not used yet for simplicity | |
| distance_mm: "500" # about 10 turns | |
| acceleration: 12800 steps/s^2 | |
| velocity: 12800 steps/s # 1 turn per second | |
| open_current: 500ma | |
| open_stall_threshold: "20" | |
| close_current: 600ma |
| - hosts: localhost | |
| become: no | |
| vars: | |
| vcenter_username: [email protected] | |
| vcenter_password: "vspheresupersecretpassword" | |
| tasks: | |
| - name: Seed directory | |
| file: | |
| path: "{{lookup('env', 'PWD')}}/seed/{{hostvars[item].inventory_hostname}}" | |
| state: directory |
| #include <WiegandNG.h> //https://github.com/jpliew/Wiegand-NG-Multi-Bit-Wiegand-Library-for-Arduino | |
| //needs https://github.com/jpliew/Wiegand-NG-Multi-Bit-Wiegand-Library-for-Arduino/pull/6 | |
| WiegandNG wg; | |
| void PrintAR6182(WiegandNG &tempwg) { | |
| volatile unsigned char *rawData=tempwg.getRawData(); | |
| uint8_t rawSize = tempwg.getBufferSize(); | |
| uint8_t countedBits = tempwg.getBitCounted(); | |
| uint8_t pinDigits = 0; |
| #cloud-config | |
| chpasswd: | |
| list: | | |
| ubuntu:VMware1! | |
| expire: false | |
| groups: | |
| - docker | |
| users: | |
| - default | |
| - name: ubuntu |
Credits and thanks: Home Assistant Forum users & Github users: @ocso, @wiphye, @teachingbirds, @tboyce1, @simbesh, @JeffLIrion @ff12 @rebmemer @siaox @DiederikvandenB @Thebuz @clapbr @Finsterclown
Starts Youtube App
entity_id: media_player.shield
command: >-
This document assumes the use of Linux as the chosen development platform. Items in bold are highly recommended.
It is recommended to use SocketCAN when working with CAN bus on Linux. It is supported by the Linux kernel mainline and follows the Linux interface model, allowing you to use other network tools such as Wireshark. This also allows the creation of virtual CAN interfaces where no physical hardware is required to simulate or replay CAN messages.
Add kiosk.js file with the content below to your www folder in config.
Like any other custom script, use ui-lovelace.yaml resources section to reference the kiosk.js file.
Make sure you add kiosk somewhere in your URL. You can use it in the id of your view or in the query string.
