Avant on fait un petit
sudo apt install zsh neofetch netcat On installe Oh my zsh
wget https://github.com/robbyrussell/oh-my-zsh/raw/master/tools/install.sh -O - | zsh
On met zsh comme interprétateur par défaut
chsh -s `which zsh`
Et on redémarre
reboot
Ensuite, on remplace ~/.zshrc par ce fichier là:
| # If you come from bash you might have to change your $PATH. | |
| # export PATH=$HOME/bin:/usr/local/bin:$PATH | |
| # Path to your oh-my-zsh installation. | |
| export ZSH=/root/.oh-my-zsh | |
| # Set name of the theme to load. Optionally, if you set this to "random" | |
| # it'll load a random theme each time that oh-my-zsh is loaded. | |
| # See https://github.com/robbyrussell/oh-my-zsh/wiki/Themes | |
| ZSH_THEME="agnoster" | |
| # Uncomment the following line to use case-sensitive completion. | |
| # CASE_SENSITIVE="true" | |
| # Uncomment the following line to use hyphen-insensitive completion. Case | |
| # sensitive completion must be off. _ and - will be interchangeable. | |
| # HYPHEN_INSENSITIVE="true" | |
| # Uncomment the following line to disable bi-weekly auto-update checks. | |
| # DISABLE_AUTO_UPDATE="true" | |
| # Uncomment the following line to change how often to auto-update (in days). | |
| # export UPDATE_ZSH_DAYS=13 | |
| # Uncomment the following line to disable colors in ls. | |
| # DISABLE_LS_COLORS="true" | |
| # Uncomment the following line to disable auto-setting terminal title. | |
| # DISABLE_AUTO_TITLE="true" | |
| # Uncomment the following line to enable command auto-correction. | |
| # ENABLE_CORRECTION="true" | |
| # Uncomment the following line to display red dots whilst waiting for completion. | |
| # COMPLETION_WAITING_DOTS="true" | |
| # Uncomment the following line if you want to disable marking untracked files | |
| # under VCS as dirty. This makes repository status check for large repositories | |
| # much, much faster. | |
| # DISABLE_UNTRACKED_FILES_DIRTY="true" | |
| # Uncomment the following line if you want to change the command execution time | |
| # stamp shown in the history command output. | |
| # The optional three formats: "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd" | |
| # HIST_STAMPS="mm/dd/yyyy" | |
| # Would you like to use another custom folder than $ZSH/custom? | |
| # ZSH_CUSTOM=/path/to/new-custom-folder | |
| # Which plugins would you like to load? (plugins can be found in ~/.oh-my-zsh/plugins/*) | |
| # Custom plugins may be added to ~/.oh-my-zsh/custom/plugins/ | |
| # Example format: plugins=(rails git textmate ruby lighthouse) | |
| # Add wisely, as too many plugins slow down shell startup. | |
| plugins=(git catimg command-not-found lol nyan) | |
| source $ZSH/oh-my-zsh.sh | |
| # User configuration | |
| # export MANPATH="/usr/local/man:$MANPATH" | |
| # You may need to manually set your language environment | |
| # export LANG=en_US.UTF-8 | |
| # Preferred editor for local and remote sessions | |
| # if [[ -n $SSH_CONNECTION ]]; then | |
| # export EDITOR='vim' | |
| # else | |
| # export EDITOR='mvim' | |
| # fi | |
| # Compilation flags | |
| # export ARCHFLAGS="-arch x86_64" | |
| # ssh | |
| # export SSH_KEY_PATH="~/.ssh/rsa_id" | |
| # Set personal aliases, overriding those provided by oh-my-zsh libs, | |
| # plugins, and themes. Aliases can be placed here, though oh-my-zsh | |
| # users are encouraged to define aliases within the ZSH_CUSTOM folder. | |
| # For a full list of active aliases, run `alias`. | |
| # | |
| # Example aliases | |
| # alias zshconfig="mate ~/.zshrc" | |
| # alias ohmyzsh="mate ~/.oh-my-zsh" | |
| alias neofetch='neofetch --ascii_colors 2 7 --colors 2 7 2 2 7 7 2' | |
| alias map='telnet mapscii.me' | |
| source ~/.profile | |
On modifie ensuite le thème agnoster, en remplaçant ~/.oh-my-zsh/themes/agnoster.zsh-theme par le fichier ci-dessous.
| # vim:ft=zsh ts=2 sw=2 sts=2 | |
| # | |
| # agnoster's Theme - https://gist.github.com/3712874 | |
| # A Powerline-inspired theme for ZSH | |
| # | |
| # # README | |
| # | |
| # In order for this theme to render correctly, you will need a | |
| # [Powerline-patched font](https://github.com/Lokaltog/powerline-fonts). | |
| # Make sure you have a recent version: the code points that Powerline | |
| # uses changed in 2012, and older versions will display incorrectly, | |
| # in confusing ways. | |
| # | |
| # In addition, I recommend the | |
| # [Solarized theme](https://github.com/altercation/solarized/) and, if you're | |
| # using it on Mac OS X, [iTerm 2](http://www.iterm2.com/) over Terminal.app - | |
| # it has significantly better color fidelity. | |
| # | |
| # # Goals | |
| # | |
| # The aim of this theme is to only show you *relevant* information. Like most | |
| # prompts, it will only show git information when in a git working directory. | |
| # However, it goes a step further: everything from the current user and | |
| # hostname to whether the last call exited with an error to whether background | |
| # jobs are running in this shell will all be displayed automatically when | |
| # appropriate. | |
| ### Segment drawing | |
| # A few utility functions to make it easy and re-usable to draw segmented prompts | |
| CURRENT_BG='NONE' | |
| # Special Powerline characters | |
| () { | |
| local LC_ALL="" LC_CTYPE="en_US.UTF-8" | |
| # NOTE: This segment separator character is correct. In 2012, Powerline changed | |
| # the code points they use for their special characters. This is the new code point. | |
| # If this is not working for you, you probably have an old version of the | |
| # Powerline-patched fonts installed. Download and install the new version. | |
| # Do not submit PRs to change this unless you have reviewed the Powerline code point | |
| # history and have new information. | |
| # This is defined using a Unicode escape sequence so it is unambiguously readable, regardless of | |
| # what font the user is viewing this source code in. Do not replace the | |
| # escape sequence with a single literal character. | |
| # Do not change this! Do not make it '\u2b80'; that is the old, wrong code point. | |
| SEGMENT_SEPARATOR=$'\ue0b0' | |
| } | |
| # Begin a segment | |
| # Takes two arguments, background and foreground. Both can be omitted, | |
| # rendering default background/foreground. | |
| prompt_segment() { | |
| local bg fg | |
| [[ -n $1 ]] && bg="%K{$1}" || bg="%k" | |
| [[ -n $2 ]] && fg="%F{$2}" || fg="%f" | |
| if [[ $CURRENT_BG != 'NONE' && $1 != $CURRENT_BG ]]; then | |
| echo -n " %{$bg%F{$CURRENT_BG}%}$SEGMENT_SEPARATOR%{$fg%} " | |
| else | |
| echo -n "%{$bg%}%{$fg%} " | |
| fi | |
| CURRENT_BG=$1 | |
| [[ -n $3 ]] && echo -n $3 | |
| } | |
| # End the prompt, closing any open segments | |
| prompt_end() { | |
| if [[ -n $CURRENT_BG ]]; then | |
| echo -n " %{%k%F{$CURRENT_BG}%}$SEGMENT_SEPARATOR" | |
| else | |
| echo -n "%{%k%}" | |
| fi | |
| echo -n "%{%f%}" | |
| CURRENT_BG='' | |
| } | |
| ### Prompt components | |
| # Each component will draw itself, and hide itself if no information needs to be shown | |
| # Context: user@hostname (who am I and where am I) | |
| prompt_context() { | |
| if [[ "$USER" != "$DEFAULT_USER" || -n "$SSH_CLIENT" ]]; then | |
| prompt_segment black 010 "%(!.%{%F{010}%}.)$USER@%m" | |
| fi | |
| } | |
| # Git: branch/detached head, dirty status | |
| prompt_git() { | |
| (( $+commands[git] )) || return | |
| local PL_BRANCH_CHAR | |
| () { | |
| local LC_ALL="" LC_CTYPE="en_US.UTF-8" | |
| PL_BRANCH_CHAR=$'\ue0a0' # | |
| } | |
| local ref dirty mode repo_path | |
| repo_path=$(git rev-parse --git-dir 2>/dev/null) | |
| if $(git rev-parse --is-inside-work-tree >/dev/null 2>&1); then | |
| dirty=$(parse_git_dirty) | |
| ref=$(git symbolic-ref HEAD 2> /dev/null) || ref="➦ $(git rev-parse --short HEAD 2> /dev/null)" | |
| if [[ -n $dirty ]]; then | |
| prompt_segment yellow black | |
| else | |
| prompt_segment green black | |
| fi | |
| if [[ -e "${repo_path}/BISECT_LOG" ]]; then | |
| mode=" <B>" | |
| elif [[ -e "${repo_path}/MERGE_HEAD" ]]; then | |
| mode=" >M<" | |
| elif [[ -e "${repo_path}/rebase" || -e "${repo_path}/rebase-apply" || -e "${repo_path}/rebase-merge" || -e "${repo_path}/../.dotest" ]]; then | |
| mode=" >R>" | |
| fi | |
| setopt promptsubst | |
| autoload -Uz vcs_info | |
| zstyle ':vcs_info:*' enable git | |
| zstyle ':vcs_info:*' get-revision true | |
| zstyle ':vcs_info:*' check-for-changes true | |
| zstyle ':vcs_info:*' stagedstr '✚' | |
| zstyle ':vcs_info:*' unstagedstr '●' | |
| zstyle ':vcs_info:*' formats ' %u%c' | |
| zstyle ':vcs_info:*' actionformats ' %u%c' | |
| vcs_info | |
| echo -n "${ref/refs\/heads\//$PL_BRANCH_CHAR }${vcs_info_msg_0_%% }${mode}" | |
| fi | |
| } | |
| prompt_bzr() { | |
| (( $+commands[bzr] )) || return | |
| if (bzr status >/dev/null 2>&1); then | |
| status_mod=`bzr status | head -n1 | grep "modified" | wc -m` | |
| status_all=`bzr status | head -n1 | wc -m` | |
| revision=`bzr log | head -n2 | tail -n1 | sed 's/^revno: //'` | |
| if [[ $status_mod -gt 0 ]] ; then | |
| prompt_segment yellow black | |
| echo -n "bzr@"$revision "✚ " | |
| else | |
| if [[ $status_all -gt 0 ]] ; then | |
| prompt_segment yellow black | |
| echo -n "bzr@"$revision | |
| else | |
| prompt_segment green black | |
| echo -n "bzr@"$revision | |
| fi | |
| fi | |
| fi | |
| } | |
| prompt_hg() { | |
| (( $+commands[hg] )) || return | |
| local rev status | |
| if $(hg id >/dev/null 2>&1); then | |
| if $(hg prompt >/dev/null 2>&1); then | |
| if [[ $(hg prompt "{status|unknown}") = "?" ]]; then | |
| # if files are not added | |
| prompt_segment red white | |
| st='±' | |
| elif [[ -n $(hg prompt "{status|modified}") ]]; then | |
| # if any modification | |
| prompt_segment yellow black | |
| st='±' | |
| else | |
| # if working copy is clean | |
| prompt_segment green black | |
| fi | |
| echo -n $(hg prompt "☿ {rev}@{branch}") $st | |
| else | |
| st="" | |
| rev=$(hg id -n 2>/dev/null | sed 's/[^-0-9]//g') | |
| branch=$(hg id -b 2>/dev/null) | |
| if `hg st | grep -q "^\?"`; then | |
| prompt_segment red black | |
| st='±' | |
| elif `hg st | grep -q "^[MA]"`; then | |
| prompt_segment yellow black | |
| st='±' | |
| else | |
| prompt_segment green black | |
| fi | |
| echo -n "☿ $rev@$branch" $st | |
| fi | |
| fi | |
| } | |
| # Dir: current working directory | |
| prompt_dir() { | |
| prompt_segment 010 black '%~' | |
| } | |
| # Virtualenv: current working virtualenv | |
| prompt_virtualenv() { | |
| local virtualenv_path="$VIRTUAL_ENV" | |
| if [[ -n $virtualenv_path && -n $VIRTUAL_ENV_DISABLE_PROMPT ]]; then | |
| prompt_segment blue black "(`basename $virtualenv_path`)" | |
| fi | |
| } | |
| # Status: | |
| # - was there an error | |
| # - am I root | |
| # - are there background jobs? | |
| prompt_status() { | |
| local symbols | |
| symbols=() | |
| # [[ $RETVAL -ne 0 ]] && symbols+="%{%F{red}%}✘" | |
| [[ $UID -eq 0 ]] && symbols+="%{%F{yellow}%}⚡" | |
| [[ $(jobs -l | wc -l) -gt 0 ]] && symbols+="%{%F{cyan}%}⚙" | |
| [[ -n "$symbols" ]] && prompt_segment black default "$symbols" | |
| } | |
| ## Main prompt | |
| build_prompt() { | |
| RETVAL=$? | |
| prompt_status | |
| prompt_virtualenv | |
| prompt_context | |
| prompt_dir | |
| # prompt_git | |
| prompt_bzr | |
| prompt_hg | |
| prompt_end | |
| } | |
| PROMPT='%{%f%b%k%}$(build_prompt) ' |
Enfin, on fait un petit source ~/.zshrc pour actualiser tout ça. On peut également redémarrer.