Linux kernel initialization, translated to bash

linux.sh

#!/boot/bzImage

# Linux kernel userspace initialization code, translated to bash
# (Minus floppy disk handling, because seriously, it's 2017.)
# Not 100% accurate, but gives you a good idea of how kernel init works
# GPLv2, Copyright 2017 Hector Martin <[email protected]>
# Based on Linux 4.10-rc2.

# Note: pretend chroot is a builtin and affects the current process
# Note: kernel actually uses major/minor device numbers instead of device name
#       strings in a few places, but I simplified it by using strings
#       everywhere even though that is not completely accurate.

panic() {
    echo "$*"
    while true; do
        sleep 1
    done
}

## https://github.com/torvalds/linux/blob/v4.10-rc2/init/do_mounts.c#L363
do_mount_root() {
    mount -t $2 "$1" /root $rootflags || return $?
    cd /root
    echo "VFS: Mounted root ($2 filesystem) on device $major:$minor"
}

## https://github.com/torvalds/linux/blob/v4.10-rc2/init/do_mounts.c#L381
mount_block_root() {
    if [ -z $rootfstype ]; then
        rootfstype=$built_in_filesystem_types
    fi
    for fs in ${rootfstype//,/ }; do
        do_mount_root $1 $fs
        ret=$?
        case $ret in
            13|22) # EACCES or EINVAL
                ;;
            *)
                echo "VFS: Cannot open root device \"$root_device_name\" or $1: error $ret"
                echo "Please append a correct \"root=\" boot option; here are the available partitions:"
                printk_all_partitions
                panic "VFS: Unable to mount root fs on $1"
        esac
    done
    echo "List of all partitions:"
    printk_all_partitions
    echo "No filesystem could mount root, tried: ${rootfstype//,/ }"
    panic "VFS: Unable to mount root fs on $1"
}

## https://github.com/torvalds/linux/blob/v4.10-rc2/init/do_mounts.c#L512
mount_root() {
    if [ "$root" = "/dev/nfs" ]; then
        mount_nfs_root && return
        echo "VFS: Unable to mount root fs via NFS, trying floppy."
        root=/dev/fd0
    fi
    if [ "$root" = "/dev/fd0" ]; then
        # floppy switching nonsense
    fi
    # This is really a mknod, as the kernel is working with the device number
    cp -a "$root" /dev/root || echo "Failed to create /dev/root: $?"
    mount_block_root /dev/root
}

## https://github.com/torvalds/linux/blob/v4.10-rc2/init/do_mounts_rd.c#L185
rd_load_image() {
    # Supports more compression algorithms in practice
    gzip -d <$1 >/dev/ram || cat $1 >/dev/ram
    # Bunch of nonsense special casing for floppies skipped
    # Everyone but S/390 gets a cute spinner here...
}

## https://github.com/torvalds/linux/blob/v4.10-rc2/init/do_mounts_initrd.c#L119
initrd_load() {
    mknod /dev/ram b 1 0
    if rd_load_image /initrd.image && [ "$root" != "/dev/ram0" ]; then
        ## https://github.com/torvalds/linux/blob/v4.10-rc2/init/do_mounts_initrd.c#L51
        # This is the deprecated "change_root" mechanism; see Documentation/initrd.txt for details.
        # In this mode, the initrd should contain /linuxrc and it is *not* responsible for mounting the rootfs.
        rm /initrd.image
        mknod /dev/root.old b 1 0
        # mount initrd on rootfs' /root
        mount_block_root /dev/root.old
        mkdir /old
        cd /old
        # try loading default modules from initrd
        load_default_modules
        (
            exec </dev/console >&0 2>&0
            cd /root
            mount --move . /
            chroot .
            setsid /linuxrc
        )
        # move initrd to rootfs' /old
        mount --move .. .
        # switch root and cwd back to / of rootfs
        chroot ..
        cd /
        mount_root
        echo -n "Trying to move old root to /initrd ... "
        mount --move /old /root/initrd
        ret=$?
        if [ $ret = 0 ]; then
            echo "okay"
        else
            if [ $ret = 2 ]; then # ENOENT
                echo "/initrd does not exit. Ignored."
            else
                echo "failed"
            fi
            echo "Unmounting old root"
            umount -l /old
            echo -n "Trying to free ramdisk memory ... "
            blockdev --flushbufs /dev/root.old && echo "okay" || echo "failed"
        if
        return 0
    else
        # Otherwise, if root=/dev/ram0, this is the "new" "pivot_root" initrd mechanism.
        # The initrd is just mounted like any other root FS and $init is called in it.
        # See Documentation/initrd.txt for what the initrd has to do in this case.
        # Note that this is obsolete too in the more recent initramfs case.
        rm /initrd.image
        return 1
    fi
}

## https://github.com/torvalds/linux/blob/v4.10-rc2/init/do_mounts.c#L549
prepare_namespace() {
    if [ ! -z "$rootdelay" ]; then
        echo "Waiting $rootdelay sec before mounting root device..."
        sleep $rootdelay
    fi
    wait_for_device_probe # wait for devices
    md_run_setup # md-raid autoconfig: https://github.com/torvalds/linux/blob/v4.10-rc2/init/do_mounts_md.c#L303

    if [ ! -z "$root" ]; then
        root_device_name="$root"
        case "$root" in
            mtd*|ubi*)
                mount_block_root "$root"
                mount -t devtmpfs devtmpfs dev  # only if CONFIG_DEVTMPFS_MOUNT
                mount --move . /
                chroot .
                return
                ;;
        esac
        root_device_name="${root##/dev/}"
    fi
    if ! initrd_load; then
        if [ ! -z $root_wait ]; then
            echo "Waiting for root device $root..."
            while ! driver_probe_done || [ ! -e $root ]; do
                sleep 1
            done
        fi
        mount_root
    fi
    mount -t devtmpfs devtmpfs dev  # only if CONFIG_DEVTMPFS_MOUNT
    mount --move . /
    chroot .
}

## https://github.com/torvalds/linux/blob/v4.10-rc2/init/initramfs.c#L608
populate_rootfs() {
    ## https://github.com/torvalds/linux/blob/v4.10-rc2/scripts/gen_initramfs_list.sh#L50
    ## OR (if initramfs disabled): https://github.com/torvalds/linux/blob/v4.10-rc2/init/noinitramfs.c#L28
    # default initramfs
    cd /
    mkdir /dev
    mknod /dev/console c 5 1
    mkdir /root

    # additional kernel built-in initramfs contents (not a real device)
    cpio -i < /dev/internal_initramfs

    # note: /dev/initrd isn't a real device but represents the initrd memory
    # /initrd.image is a real file on rootfs
    if [ -e /dev/initrd ]; then
        echo "Trying to unpack rootfs image as initramfs..."
        # actual kernel code for cpio can deal with compression & concatenation
        if ! cpio -i < /dev/initrd; then
            echo "rootfs image is not an initramfs; looks like an initrd"
            cp /dev/initrd /initrd.image
        fi
        free_initrd # gets rid of /dev/initrd: https://github.com/torvalds/linux/blob/v4.10-rc2/init/initramfs.c#L527
        # Try loading default modules from initramfs.  This gives
        # us a chance to load before device_initcalls.        
        load_default_modules
    fi
}

## https://github.com/torvalds/linux/blob/v4.10-rc2/init/main.c#L952
kernel_init() {
    ## https://github.com/torvalds/linux/blob/v4.10-rc2/init/main.c#L999
    early_kernel_init
    
    # Note: at this point, as part of basic VFS init, a rootfs (special tmpfs) is mounted at /
    
    ## this is an initcall, called here: https://github.com/torvalds/linux/blob/v4.10-rc2/init/main.c#L873
    ## declared here: https://github.com/torvalds/linux/blob/v4.10-rc2/init/initramfs.c#L658
    populate_rootfs

    more_kernel_init

    # Open the /dev/console on the rootfs, this should never fail
    exec </dev/console >&0 2>&0 || echo "Warning: unable to open an initial console."

    # check if there is an early userspace init.  If yes, let it do all the work
    if [ -z "$rdinit" ]; then
        rdinit=/init
    fi

    if [ ! -e "$rdinit" ]; then
        rdinit=
        # Mount root, the whole shebang.
        # Only done if there is *no* $rdinit (/init) in the initramfs!
        prepare_namespace
    fi

    # Ok, we have completed the initial bootup, and
    # we're essentially up and running. Get rid of the
    # initmem segments and start the user-mode stuff..
    #
    # rootfs is available now, try loading the public keys
    # and default modules
    integrity_load_keys
    load_default_modules

    late_kernel_init

    if [ ! -z "$rdinit" ]; then
        # If present in the initramfs, $rdinit (/init) is responsible
        # for *everything*, and this is the modern way of doing things.
        # To find out what $rdinit has to do in that case, read
        # Documentation/filesystems/ramfs-rootfs-initramfs.txt
        exec $rdinit
        echo "Failed to execute $rdinit (error $?)"
    fi

    if [ ! -z "$init" ]; then
        # This could be the real /sbin/init, or an initrd /sbin/init.
        exec $init
        echo "Requested init $init failed (error $?)"
    fi

    exec /sbin/init || exec /etc/init || exec /bin/init || exec /bin/sh

    panic "No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance."
}

kernel_init