Starting Kodi automatically on Raspbian Jessie and Stretch

README.txt

So you were able to install Kodi via "sudo apt-get install kodi" but have no idea how to force it to autostart on boot?

You have tried all those googled solutions such as adding kodi-standalone to .bashrc, creating init.d script but nothing worked?

This is the right place to get the answer.

For some reason, the current version of Kodi doesnt provide 2 important files:
/etc/init.d/kodi
/etc/default/kodi

They are required to start kodi on boot. Also, for some unknown reason, I haven't found a single place in the whole internet, where those files would be available.

To fix the problem you need to create /etc/init.d/kodi first:
$ sudo touch /etc/init.d/kodi
The content for this file is provided in etc_init.d_kodi file attached to this gist. Use your favourite editor to paste the code into the file.

The second file to create is /etc/default/kodi. 
$ sudo touch /etc/default/kodi
Use the content from etc_default_kodi file attached to this gist:

We are almost done. The last thing is to is to make /etc/default/kodi executable:
$ sudo chmod a+x /etc/init.d/kodi

and add the init.d script to the startup scripts:
sudo update-rc.d kodi defaults
and thats it :)

etc_default_kodi

# Set this to 1 to enable startup
ENABLED=1

# The user to run Kodi as
USER=pi

# Adjust niceness of Kodi (decrease for higher priority)
NICE=-5

etc_init.d_kodi

#! /bin/sh
### BEGIN INIT INFO
# Provides:          kodi
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: XBMC media centre
# Description:       Starts the XBMC media centre in standalone mode
### END INIT INFO

# Author: Michael Gorven <[email protected]>

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="media centre"
NAME=kodi
STARTAS=/usr/bin/kodi-standalone
DAEMON=/bin/sh
DAEMON_ARGS=""
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
GEOMETRY=/var/run/kodi.fbset

# Defaults
ENABLED=0
USER=kodi
NICE=0

# Exit if the package is not installed
[ -x "$STARTAS" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Backwards compatibility with previous package name
[ -r /etc/default/xbmc ] && . /etc/default/xbmc

# Exit if service is not enabled
[ "$ENABLED" = "1" ] || exit 0

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
        fbset --show | grep geometry | cut -d' ' -f 6- > $GEOMETRY
        # Return
        #   0 if daemon has been started
        #   1 if daemon was already running
        #   2 if daemon could not be started
        start-stop-daemon --start --quiet --pidfile $PIDFILE --user $USER --exec $DAEMON --startas $STARTAS --test > /dev/null \
                || return 1
        start-stop-daemon --start --quiet --pidfile $PIDFILE --nicelevel $NICE --chuid $USER --background --make-pidfile --exec $DAEMON --startas $STARTAS -- \
                $DAEMON_ARGS \
                || return 2
        # Add code here, if necessary, that waits for the process to be ready
        # to handle requests from services started subsequently which depend
        # on this one.  As a last resort, sleep for some time.
        sleep 10
        start-stop-daemon --start --quiet --pidfile $PIDFILE --user $USER --exec $DAEMON --startas $STARTAS --test > /dev/null \
                || return 2
}

#
# Function that stops the daemon/service
#
do_stop()
{
        # Return
        #   0 if daemon has been stopped
        #   1 if daemon was already stopped
        #   2 if daemon could not be stopped
        #   other if a failure occurred
        start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --user $USER --exec $DAEMON --startas $STARTAS

        # Kodi doesn't actually handle signals, so we have to send an RPC request to ask it to exit
        if [ -x /usr/bin/wget ]; then
                wget --post-data '{"jsonrpc": "2.0", "method": "Application.Quit", "params": [], "id": 0}' --header 'Content-Type: application/json' -O /dev/null --quiet http://localhost:8080/jsonrpc
        fi
        # Wait for children to finish too if this is a daemon that forks
        # and if the daemon is only ever run from this initscript.
        # If the above conditions are not satisfied then add some other code
        # that waits for the process to drop all resources that could be
        # needed by services started subsequently.  A last resort is to
        # sleep for some time.
        start-stop-daemon --stop --quiet --retry=0/30/KILL/5 --user $USER --name $NAME.bin
        RETVAL="$?"
        [ "$RETVAL" = 2 ] && return 2

        # Many daemons don't delete their pidfiles when they exit.
        rm -f $PIDFILE

        # Try to fix the display
        VT="$(fgconsole)"
        if [ "$VT" ]; then
                chvt 7
                chvt "$VT"
        fi

        if [ -e $GEOMETRY ]; then
                fbset --geometry $(cat $GEOMETRY)
        fi

        return "$RETVAL"
}

case "$1" in
  start)
        [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
        do_start
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
  stop)
        [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
        do_stop
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
  status)
        status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
        ;;
  restart|force-reload)
        #
        # If the "reload" option is implemented then remove the
        # 'force-reload' alias
        #
        log_daemon_msg "Restarting $DESC" "$NAME"
        do_stop
        case "$?" in
          0|1)
                do_start
                case "$?" in
                        0) log_end_msg 0 ;;
                        1) log_end_msg 1 ;; # Old process is still running
                        *) log_end_msg 1 ;; # Failed to start
                esac
                ;;
          *)
                # Failed to stop
                log_end_msg 1
                ;;
        esac
        ;;
  *)
        echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
        exit 3
        ;;
esac

:

Works great !!
After putting these two files at the right place, I also did:

• chmod +x /etc/init.d/kodi
• in my case it is /etc/default (not /etc/defaults)
• one time: sudo /etc/init.d/kodi start (this will start kodi from the command line)
• one time: sudo systemctl enable kodi
  reboot the raspberry and it will start Kodi automatically :-)
  Great job !!

I followed @RigacciOrg's steps without errors but kodi still doesn't start at boot. I've no idea what I'm missing.
@tdietrich67 - what did you finally figure out to get it working?

Thank you @RigacciOrg!! Followed exactly those steps, executed commands with sudo, and it worked immediately :)
Note: before I did this I cleaned up what was done in the original explanation

Everyone here needs to understand the difference between systemd, and init.d before they do any of this.

Thank you all for the comments, I have corrected the mistakes.
After updating to Raspbian Buster and Pi4 I will also check if this solution still works. For now Raspbian Buster has older version of Kodi, which doesn't even run in standalone version. So if you don't have a proper Raspbian backup, don't even try to upgrade if having working Kodi is one of your top priorities.

in raspberry pi 4 put this command :

sudo nano ~/.config/lxsession/LXDE-pi/autostart

add the line:

@kodi

done !

you need “sudo nano ....״

…

Sent from my iPhone

On 3 Jan 2020, at 1:27, adamtomajko ***@***.***> wrote:  My question could make you laugh. But I don't have knowledge about any of this. But when I write out provided script with nano editor ( nano /etc/init.d/kodi ) system rejected it become of permission. How am I supposed to do this. Thank you for helping me out. — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

Thank you! I needed the /etc/init.d/kodi script. Much appreciated.

Yes its better because in will run only the kodi without desktop

…

Sent from my iPhone

On 20 Feb 2020, at 21:12, danieljoy ***@***.***> wrote:  Thank you! I needed the /etc/init.d/kodi script. Much appreciated. — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.