Created
September 3, 2021 12:38
-
-
Save DawTaylor/96b299a8ea2fda0dc06ecebc1769cd9b to your computer and use it in GitHub Desktop.
CR-200B start and end gcodes
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| G91 ;Relative positioning | |
| G1 E-2 F2700 ;Retract a bit | |
| G1 E-2 Z0.2 F2400 ;Retract and raise Z | |
| G1 X5 Y5 F3000 ;Wipe out | |
| G1 Z10 ;Raise Z more | |
| G90 ;Absolute positioning | |
| G1 X0 Y0;Present print | |
| M106 S0 ;Turn-off fan | |
| M104 S0 ;Turn-off hotend | |
| M140 S0 ;Turn-off bed | |
| M84 X Y E ;Disable all steppers but Z |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration | |
| M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate | |
| M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration | |
| M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk | |
| M220 S100 ;Reset Feedrate | |
| M221 S100 ;Reset Flowrate | |
| G28 ;Home | |
| G92 E0 ;Reset Extruder | |
| G1 Z2.0 F3000 ;Move Z Axis up | |
| G1 X0.1 Y20 Z0.28 F5000.0 ;Move to start position | |
| G1 X0.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line | |
| G1 X0.4 Y200.0 Z0.28 F5000.0 ;Move to side a little | |
| G1 X0.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line | |
| G92 E0 ;Reset Extruder | |
| G1 Z2.0 F3000 ;Move Z Axis up |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment