Created
June 25, 2017 23:56
-
-
Save DieterReuter/1604c0deeaba3331abc7bf8b84dbe447 to your computer and use it in GitHub Desktop.
Espressobin Board: first boot with Armbian from Armbian_5.32_Espressobin_Ubuntu_xenial_default_4.4.73.img.gz
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Welcome to Ubuntu 16.04.2 LTS! | |
[ 4.092596] systemd[1]: Set hostname to <espressobin>. | |
[ 4.134019] random: systemd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) | |
[ 4.155766] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 11 bits of entropy available) | |
[ 4.167749] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 11 bits of entropy available) | |
[ 4.182752] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 12 bits of entropy available) | |
[ 4.187693] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 12 bits of entropy available) | |
[ 4.196087] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 12 bits of entropy available) | |
[ 4.203474] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 12 bits of entropy available) | |
[ 4.216722] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 13 bits of entropy available) | |
[ 4.485685] systemd[1]: Listening on fsck to fsckd communication Socket. | |
[ OK ] Listening on fsck to fsckd communication Socket. | |
[ 4.503737] systemd[1]: Reached target Remote File Systems (Pre). | |
[ OK ] Reached target Remote File Systems (Pre). | |
[ 4.519899] systemd[1]: Listening on Syslog Socket. | |
[ OK ] Listening on Syslog Socket. | |
[ OK ] Created slice System Slice.lice System Slice. | |
[ 4.544248] systemd[1]: Listening on Journal Audit Socket. | |
[ OK ] Listening on Journal Audit Socket. | |
[ OK ] Started Forward Password Requests to Wall Directory Watch.l Directory Watch. | |
[ OK ] Listening on udev Kernel Socket.dev Kernel Socket. | |
[ 4.591899] systemd[1]: Listening on Journal Socket (/dev/log). | |
[ OK ] Listening on Journal Socket (/dev/log). | |
[ 4.608337] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
[ OK ] Created slice system-serial\x2dgetty.slice. | |
[ 4.624193] systemd[1]: Created slice User and Session Slice. | |
[ OK ] Created slice User and Session Slice. | |
[ 4.639702] systemd[1]: Reached target Slices. | |
[ OK ] Reached target Slices. | |
[ 4.651693] systemd[1]: Reached target Remote File Systems. | |
[ OK ] Reached target Remote File Systems. | |
[ 4.668014] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
[ OK ] Started Dispatch Password Requests to Console Directory Watch. | |
[ 4.687693] systemd[1]: Reached target Paths. | |
[ OK ] Reached target Paths. | |
[ 4.699967] systemd[1]: Listening on Journal Socket. | |
[ OK ] Listening on Journal Socket. | |
[ 4.728271] systemd[1]: Starting Set console keymap... | |
Starting Set console keymap... | |
[ 4.742752] systemd[1]: Starting Remount Root and Kernel File Systems... | |
Starting Remount Root and Kernel File Systems... | |
[ 4.763013] systemd[1]: Mounting Debug File System... | |
Mounting Debug File System... | |
[ 4.777831] systemd[1]: Mounting POSIX Message Queue File System... | |
Mounting POSIX Message Queue File System... | |
[ 4.828298] systemd[1]: Starting Load Kernel Modules... | |
Starting Load Kernel Modules... | |
[ 4.850872] systemd[1]: Starting Restore / save the current clock... | |
Starting Restore / save the current clock... | |
[ 4.881355] systemd[1]: Starting Nameserver information manager... | |
Starting Nameserver information manager... | |
[ 4.896414] systemd[1]: Mounting Huge Pages File System... | |
Mounting Huge Pages File System... | |
[ 4.911895] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
[ OK ] Listening on /dev/initctl Compatibility Named Pipe. | |
[ 4.931938] systemd[1]: Listening on udev Control Socket. | |
[ OK ] Listening on udev Control Socket. | |
[ 4.946332] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro | |
[ 4.955260] systemd[1]: Reached target Swap. | |
[ OK ] Reached target Swap. | |
[ 4.969716] systemd[1]: Started Trigger resolvconf update for networkd DNS. | |
[ OK ] Started Trigger resolvconf update for networkd DNS. | |
[ 5.012002] systemd[1]: Starting Create list of required static device nodes for the current kernel... | |
Starting Create list of required st... nodes for the current kernel... | |
[ 5.031722] systemd[1]: Reached target Encrypted Volumes[ OK ] Reached target Encrypted Volumes. | |
[ 5.063160] systemd[1]: Mounted Huge Pages File System[ OK ] Mounted Huge Pages File System. | |
[ 5.075736] systemd[1]: Mounted Debug File Syst[ OK ] Mounted Debug File System. | |
[ 5.087794] systemd[1]: Mounted POSIX Message Queue File System. | |
[ OK ] Mounted POSIX Message Queue File System. | |
[ 5.104924] systemd[1]: Started Set console keymap. | |
[ OK ] Started Set console keymap. | |
[ 5.121659] systemd[1]: Started Remount Root and Kernel File Systems. | |
[ OK ] Started Remount Root and Kernel File Systems. | |
[ 5.141959] systemd[1]: Started Load Kernel Modules. | |
[ OK ] Started Load Kernel Modules. | |
[ 5.157078] systemd[1]: Started Restore / save the current clock. | |
[ OK ] Started Restore / save the current clock. | |
[ 5.190240] systemd[1]: Started Create list of required static device nodes for the current kernel. | |
[ OK ] Started Create list of required sta...ce nodes for the current kernel. | |
[ 5.214857] systemd[1]: Started Nameserver information manager. | |
[ OK ] Started Nameserver information manager. | |
[ 5.238595] systemd[1]: Time has been changed | |
[ 5.413602] systemd[1]: Reached target Network (Pre). | |
[ OK ] Reached target Network (Pre). | |
[ 5.443960] systemd[1]: Starting Create Static Device Nodes in /dev... | |
Starting Create Static Device Nodes in /dev... | |
[ 5.462696] systemd[1]: Starting Apply Kernel Variables... | |
Starting Apply Kernel Variables... | |
[ 5.479033] systemd[1]: Mounting FUSE Control File System... | |
Mounting FUSE Control File System... | |
Mounting Configuration File System... | |
Starting Load/Save Random Seed... | |
Starting udev Coldplug all Devices... | |
[ OK ] Mounted Configuration File System. | |
[ OK ] Mounted FUSE Control File System. | |
[ OK ] Started Create Static Device Nodes in /dev. | |
[ OK ] Started Apply Kernel Variables. | |
[ OK ] Started Load/Save Random Seed. | |
[ OK ] Reached target Local File Systems (Pre). | |
Mounting /tmp... | |
Starting udev Kernel Device Manager... | |
[ OK ] Mounted /tmp. | |
[ OK ] Started udev Coldplug all Devices. | |
[ OK ] Started Entropy daemon using the HAVEGE algorithm. | |
[ OK ] Reached target Local File Systems. | |
Starting LSB: Restore and store ALSA driver settings... | |
Starting Armbian enhanced Log2Ram... | |
Starting Raise network interfaces... | |
Starting Set console font and keymap... | |
[ OK ] Started udev Kernel Device Manager. | |
[ OK ] Started LSB: Restore and store ALSA driver settings. | |
[ OK ] Started Armbian enhanced Log2Ram. | |
Starting Journal Service... | |
[ OK ] Started Journal Service. | |
Starting Flush Journal to Persistent Storage... | |
[ OK ] Started Flush Journal to Persistent Storage. | |
[ OK ] Found device /dev/ttyS0. | |
Starting Create Volatile Files and Directories... | |
[ OK ] Started Create Volatile Files and Directories. | |
[ OK ] Found device /dev/ttyMV0. | |
Starting Update UTMP about System Boot/Shutdown... | |
[ OK ] Reached target System Time Synchronized. | |
[ OK ] Started Update UTMP about System Boot/Shutdown. | |
[ OK ] Reached target System Initialization. | |
[ OK ] Started Daily apt activities. | |
[ OK ] Started Daily Cleanup of Temporary Directories. | |
[ OK ] Reached target Timers. | |
Starting Armbian filesystem resize service... | |
[ OK ] Listening on D-Bus System Message Bus Socket. | |
[ OK ] Reached target Sockets. | |
[ OK ] Started ifup for eth0. | |
[ OK ] Found device /sys/subsystem/net/devices/eth0. | |
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. | |
[ OK ] Started ifup for lan0. | |
[ OK ] Found device /sys/subsystem/net/devices/lan0. | |
[ OK ] Started ifup for lan1. | |
[ OK ] Found device /sys/subsystem/net/devices/lan1. | |
[ OK ] Started ifup for br0. | |
Starting Load/Save RF Kill Switch Status... | |
[ OK ] Started Load/Save RF Kill Switch Status. | |
[FAILED] Failed to start Set console font and keymap. | |
See 'systemctl status console-setup.service' for details. | |
[ OK ] Started Armbian filesystem resize service. | |
[ OK ] Reached target Basic System. | |
Starting System Logging Service... | |
Starting Login Service... | |
Starting LSB: Load kernel modules needed to enable cpufreq scaling... | |
[ OK ] Started Regular background program processing daemon. | |
Starting LSB: Start/stop sysstat's sadc... | |
Starting Permit User Sessions... | |
Starting LSB: Armbian gathering hardware information... | |
[ OK ] Started D-Bus System Message Bus. | |
Starting LSB: Starts LIRC daemon.... | |
[ OK ] Started Armbian first run tasks. | |
[ OK ] Created slice system-getty.slice. | |
Starting Network Manager... | |
[ OK ] Started System Logging Service. | |
[ OK ] Started Permit User Sessions. | |
[ OK ] Started LSB: Start/stop sysstat's sadc. | |
[ OK ] Started LSB: Starts LIRC daemon.. | |
Starting Set console scheme... | |
[ OK ] Started Login Service. | |
[ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. | |
[ OK ] Started Set console scheme. | |
Starting LSB: set CPUFreq kernel parameters... | |
[ OK ] Started LSB: set CPUFreq kernel parameters. | |
Starting LSB: Set sysfs variables from /etc/sysfs.conf... | |
[ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf. | |
[ OK ] Started Network Manager. | |
Starting Network Manager Wait Online... | |
Starting Network Manager Script Dispatcher Service... | |
[ OK ] Started Network Manager Script Dispatcher Service. | |
Starting Hostname Service... | |
[ OK ] Started Hostname Service. | |
Starting Authenticate and Authorize Users to Run Privileged Tasks... | |
[ OK ] Started LSB: Armbian gathering hardware information. | |
Starting WPA supplicant... | |
[ OK ] Started WPA supplicant. | |
[ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks. | |
[ OK ] Started Network Manager Wait Online. | |
[ OK ] Stopped OpenBSD Secure Shell server. | |
Starting OpenBSD Secure Shell server... | |
[ OK ] Started OpenBSD Secure Shell server. | |
Stopping OpenBSD Secure Shell server... | |
[ OK ] Stopped OpenBSD Secure Shell server. | |
Starting OpenBSD Secure Shell server... | |
[ OK ] Started OpenBSD Secure Shell server. | |
[FAILED] Failed to start Raise network interfaces. | |
See 'systemctl status networking.service' for details. | |
[ OK ] Reached target Network. | |
[ OK ] Started Unattended Upgrades Shutdown. | |
[ OK ] Reached target Network is Online. | |
Starting LSB: Start NTP daemon... | |
Starting LSB: Advanced IEEE 802.11 management daemon... | |
Starting /etc/rc.local Compatibility... | |
Starting LSB: disk temperature monitoring daemon... | |
[ OK ] Started LSB: Advanced IEEE 802.11 management daemon. | |
[ OK ] Started /etc/rc.local Compatibility. | |
[ OK ] Started LSB: disk temperature monitoring daemon. | |
[ OK ] Started Getty on tty1. | |
[ OK ] Started Serial Getty on ttyMV0. | |
[ OK ] Started Serial Getty on ttyS0. | |
[ OK ] Reached target Login Prompts. | |
[ OK ] Started LSB: Start NTP daemon. | |
[ OK ] Reached target Multi-User System. | |
[ OK ] Reached target Graphical Interface. | |
Starting Update UTMP about System Runlevel Changes... | |
[ OK ] Started Update UTMP about System Runlevel Changes. | |
Ubuntu 16.04.2 LTS espressobin ttyMV0 | |
espressobin login: |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Marvell>> run bootcmd | |
switch to partitions #0, OK | |
mmc0 is current device | |
14302208 bytes read in 4862 ms (2.8 MiB/s) | |
** No boot file defined ** | |
10489 bytes read in 159 ms (63.5 KiB/s) | |
## Flattened Device Tree blob at 01000000 | |
Booting using the fdt blob at 0x1000000 | |
Using Device Tree in place at 0000000001000000, end 00000000010058f8 | |
Starting kernel ... | |
Timer summary in microseconds: | |
Mark Elapsed Stage | |
0 0 reset | |
671,000 671,000 id=64 | |
684,000 13,000 main_loop | |
684,000 0 id=65 | |
3,767,000 3,083,000 bootm_start | |
457,506,000453,739,000 start_kernel | |
457,506,000 0 id=15 | |
307,431,990,771,392,093,6307,431,990,725,641,493,6 board_init_f | |
Accumulated time: | |
[ 0.000000] Booting Linux on physical CPU 0x0 | |
[ 0.000000] Initializing cgroup subsys cpuset | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Initializing cgroup subsys cpuacct | |
[ 0.000000] Linux version 4.4.73-mvebu64 (root@build-armkernel) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP PREEMPT Sun Jun 25 23:01:55 UTC 2017 | |
[ 0.000000] Boot CPU: AArch64 Processor [410fd034] | |
[ 0.000000] earlycon: Early serial console at MMIO 0xd0012000 (options '') | |
[ 0.000000] bootconsole [uart0] enabled | |
[ 0.000000] efi: Getting EFI parameters from FDT: | |
[ 0.000000] efi: UEFI not found. | |
[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv1.0 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
[ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc07efc1000 s25240 r8192 d32104 u65536 | |
[ 0.000000] Detected VIPT I-cache on CPU0 | |
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515616 | |
[ 0.000000] Kernel command line: console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk0p1 rw rootwait | |
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
[ 0.000000] software IO TLB [mem 0x78a00000-0x7ca00000] (64MB) mapped at [ffffffc078a00000-ffffffc07c9fffff] | |
[ 0.000000] Memory: 1962472K/2095232K available (9613K kernel code, 575K rwdata, 3304K rodata, 360K init, 288K bss, 116376K reserved, 16384K cma-reserved) | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) | |
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) | |
[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc2000000 ( 32 MB actual) | |
[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) | |
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) | |
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) | |
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB) | |
[ 0.000000] .init : 0xffffffc000d20000 - 0xffffffc000d7a000 ( 360 KB) | |
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000d1f554 ( 12926 KB) | |
[ 0.000000] .data : 0xffffffc000d94000 - 0xffffffc000e23c00 ( 575 KB) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] Preemptible hierarchical RCU implementation. | |
[ 0.000000] Build-time adjustment of leaf fanout to 64. | |
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2. | |
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 | |
[ 0.000000] NR_IRQS:64 nr_irqs:64 0 | |
[ 0.000000] GIC: Using split EOI/Deactivate mode | |
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000d1d40000 | |
[ 0.000000] Architected cp15 timer(s) running at 12.50MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns | |
[ 0.000003] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns | |
[ 0.008397] Console: colour dummy device 80x25 | |
[ 0.012904] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000) | |
[ 0.023457] pid_max: default: 32768 minimum: 301 | |
[ 0.028261] Security Framework initialized | |
[ 0.032459] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) | |
[ 0.039324] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) | |
[ 0.047165] Initializing cgroup subsys memory | |
[ 0.051595] Initializing cgroup subsys devices | |
[ 0.056145] Initializing cgroup subsys freezer | |
[ 0.060712] Initializing cgroup subsys net_cls | |
[ 0.065281] Initializing cgroup subsys net_prio | |
[ 0.069941] Initializing cgroup subsys hugetlb | |
[ 0.074509] Initializing cgroup subsys pids | |
[ 0.079037] EFI services will not be available. | |
[ 0.083643] ASID allocator initialised with 65536 entries | |
[ 0.125340] Detected VIPT I-cache on CPU1 | |
[ 0.125364] CPU1: found redistributor 1 region 0:0x00000000d1d60000 | |
[ 0.125386] CPU1: Booted secondary processor [410fd034] | |
[ 0.125440] Brought up 2 CPUs | |
[ 0.144359] SMP: Total of 2 processors activated. | |
[ 0.149203] CPU features: detected feature: GIC system register CPU interface | |
[ 0.156551] CPU: All CPU(s) started at EL2 | |
[ 0.160771] alternatives: patching kernel code | |
[ 0.165776] devtmpfs: initialized | |
[ 0.171715] DMI not present or invalid. | |
[ 0.175806] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 0.185787] futex hash table entries: 512 (order: 4, 65536 bytes) | |
[ 0.192757] xor: measuring software checksum speed | |
[ 0.237685] 8regs : 1862.000 MB/sec | |
[ 0.281947] 8regs_prefetch: 1711.000 MB/sec | |
[ 0.326564] 32regs : 2273.000 MB/sec | |
[ 0.370823] 32regs_prefetch: 1982.000 MB/sec | |
[ 0.375494] xor: using function: 32regs (2273.000 MB/sec) | |
[ 0.381064] pinctrl core: initialized pinctrl subsystem | |
[ 0.387522] NET: Registered protocol family 16 | |
[ 0.404094] cpuidle: using governor ladder | |
[ 0.420257] cpuidle: using governor menu | |
[ 0.424450] vdso: 2 pages (1 code @ ffffffc000d99000, 1 data @ ffffffc000d98000) | |
[ 0.432022] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 0.439688] DMA: preallocated 256 KiB pool for atomic allocations | |
[ 0.446002] Serial: AMBA PL011 UART driver | |
[ 0.451403] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 7, base_baud = 1562500) is a mvebu-uart | |
[ 0.460852] console [ttyMV0] enabled | |
[ 0.460852] console [ttyMV0] enabled | |
[ 0.468196] bootconsole [uart0] disabled | |
[ 0.468196] bootconsole [uart0] disabled | |
[ 0.477175] armada-3700-pinctrl d0013830.north-bridge-pinctrl: registered pinctrl driver | |
[ 0.486163] armada-3700-pinctrl d0018830.south-bridge-pinctrl: registered pinctrl driver | |
[ 0.588701] raid6: int64x1 gen() 359 MB/s | |
[ 0.660606] raid6: int64x1 xor() 372 MB/s | |
[ 0.732676] raid6: int64x2 gen() 589 MB/s | |
[ 0.804763] raid6: int64x2 xor() 506 MB/s | |
[ 0.876825] raid6: int64x4 gen() 902 MB/s | |
[ 0.948823] raid6: int64x4 xor() 639 MB/s | |
[ 1.020919] raid6: int64x8 gen() 941 MB/s | |
[ 1.092951] raid6: int64x8 xor() 611 MB/s | |
[ 1.165028] raid6: neonx1 gen() 623 MB/s | |
[ 1.237050] raid6: neonx1 xor() 620 MB/s | |
[ 1.309123] raid6: neonx2 gen() 1022 MB/s | |
[ 1.381134] raid6: neonx2 xor() 879 MB/s | |
[ 1.453190] raid6: neonx4 gen() 1321 MB/s | |
[ 1.525240] raid6: neonx4 xor() 1007 MB/s | |
[ 1.597313] raid6: neonx8 gen() 1387 MB/s | |
[ 1.669354] raid6: neonx8 xor() 1024 MB/s | |
[ 1.673593] raid6: using algorithm neonx8 gen() 1387 MB/s | |
[ 1.679344] raid6: .... xor() 1024 MB/s, rmw enabled | |
[ 1.684208] raid6: using intx1 recovery algorithm | |
[ 1.689002] ACPI: Interpreter disabled. | |
[ 1.693699] vgaarb: loaded | |
[ 1.696478] SCSI subsystem initialized | |
[ 1.700267] usbcore: registered new interface driver usbfs | |
[ 1.705995] usbcore: registered new interface driver hub | |
[ 1.711414] usbcore: registered new device driver usb | |
[ 1.716744] pps_core: LinuxPPS API ver. 1 registered | |
[ 1.721821] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
[ 1.731010] PTP clock support registered | |
[ 1.735125] dmi: Firmware registration failed. | |
[ 1.740570] NetLabel: Initializing | |
[ 1.744019] NetLabel: domain hash size = 128 | |
[ 1.748146] NetLabel: protocols = UNLABELED CIPSOv4 | |
[ 1.753660] NetLabel: unlabeled traffic allowed by default | |
[ 1.759497] clocksource: Switched to clocksource arch_sys_counter | |
[ 1.766184] pnp: PnP ACPI: disabled | |
[ 1.776637] NET: Registered protocol family 2 | |
[ 1.781809] TCP established hash table entries: 16384 (order: 5, 131072 bytes) | |
[ 1.789503] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) | |
[ 1.796195] TCP: Hash tables configured (established 16384 bind 16384) | |
[ 1.803038] UDP hash table entries: 1024 (order: 3, 32768 bytes) | |
[ 1.808984] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) | |
[ 1.816019] NET: Registered protocol family 1 | |
[ 1.820149] RPC: Registered named UNIX socket transport module. | |
[ 1.826551] RPC: Registered udp transport module. | |
[ 1.831133] RPC: Registered tcp transport module. | |
[ 1.835980] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 1.843676] kvm [1]: GICv3: no GICV resource entry | |
[ 1.848103] kvm [1]: disabling GICv2 emulation | |
[ 1.853225] kvm [1]: interrupt-controller@ffffffc0000abdc8 IRQ30 | |
[ 1.859331] kvm [1]: timer IRQ3 | |
[ 1.862684] kvm [1]: Hyp mode initialized successfully | |
[ 1.869927] audit: initializing netlink subsys (disabled) | |
[ 1.875148] audit: type=2000 audit(1.804:1): initialized | |
[ 1.881252] HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
[ 1.895435] VFS: Disk quotas dquot_6.6.0 | |
[ 1.899332] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
[ 1.909383] NFS: Registering the id_resolver key type | |
[ 1.914582] Key type id_resolver registered | |
[ 1.918576] Key type id_legacy registered | |
[ 1.922917] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 1.929761] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
[ 1.936390] fuse init (API version 7.23) | |
[ 1.940923] SGI XFS with ACLs, security attributes, realtime, no debug enabled | |
[ 1.951893] async_tx: api initialized (async) | |
[ 1.956523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) | |
[ 1.963661] io scheduler noop registered | |
[ 1.968088] io scheduler deadline registered | |
[ 1.972130] io scheduler cfq registered (default) | |
[ 1.977662] phy-mvebu-comphy d0018300.comphy: comphy0: unsupported comphy mode | |
[ 1.984782] phy-mvebu-comphy d0018300.comphy: comphy1: unsupported comphy mode | |
[ 1.992494] phy-mvebu-comphy d0018300.comphy: comphy2: unsupported comphy mode | |
[ 2.001118] irq: Cannot allocate irq_descs @ IRQ32, assuming pre-allocated | |
[ 2.008061] irq: Cannot allocate irq_descs @ IRQ68, assuming pre-allocated | |
[ 2.016448] libphy: Fixed MDIO Bus: probed | |
[ 2.020281] tun: Universal TUN/TAP device driver, 1.6 | |
[ 2.025906] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> | |
[ 2.031983] libphy: mdio_driver_register: mv88e6xxx | |
[ 2.036962] libphy: orion_mdio_bus: probed | |
[ 2.041222] mdio_bus d0032004.mdio-mi:01: mdio_device_register | |
[ 2.049339] mvneta d0030000.ethernet eth0: Using device tree mac address f0:ad:4e:03:6b:d5 | |
[ 2.119627] sky2: driver version 1.30 | |
[ 2.123542] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
[ 2.129222] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
[ 2.135568] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k | |
[ 2.142877] igb: Copyright (c) 2007-2014 Intel Corporation. | |
[ 2.148252] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k | |
[ 2.156549] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
[ 2.162711] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k | |
[ 2.170742] ixgbe: Copyright (c) 1999-2015 Intel Corporation. | |
[ 2.176762] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k | |
[ 2.186213] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. | |
[ 2.192464] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI | |
[ 2.199957] ixgb: Copyright (c) 1999-2008 Intel Corporation. | |
[ 2.406168] PCI host bridge /soc/pcie@d0070000 ranges: | |
[ 2.411328] MEM 0xe8000000..0xe8ffffff -> 0xe8000000 | |
[ 2.416711] IO 0xe9000000..0xe900ffff -> 0xe9000000 | |
[ 2.522053] advk-pcie d0070000.pcie: link up | |
[ 2.526101] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00 | |
[ 2.532947] pci_bus 0000:00: root bus resource [bus 00-ff] | |
[ 2.538180] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xe8ffffff] | |
[ 2.545185] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xe9000000-0xe900ffff]) | |
[ 2.556209] pci 0000:00:00.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit pref] | |
[ 2.563895] pci 0000:00:00.0: BAR 2: assigned [mem 0xe8100000-0xe81fffff 64bit pref] | |
[ 2.572798] mv_xor d0060900.xor: Marvell shared XOR driver | |
[ 2.596063] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq ) | |
[ 2.624078] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq ) | |
[ 2.636543] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
[ 2.645015] Unable to detect cache hierarchy from DT for CPU 0 | |
[ 2.651853] brd: module loaded | |
[ 2.659827] loop: module loaded | |
[ 2.663376] SCSI Media Changer driver v0.25 | |
[ 2.670962] ahci-mvebu d00e0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode | |
[ 2.680192] ahci-mvebu d00e0000.sata: flags: ncq sntf led only pmp fbs pio slum part sxs | |
[ 2.689576] scsi host0: ahci-mvebu | |
[ 2.693012] ata1: SATA max UDMA/133 mmio [mem 0xd00e0000-0xd00e0177] port 0x100 irq 29 | |
[ 2.701907] VFIO - User Level meta-driver version: 0.3 | |
[ 2.708124] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 2.714699] ehci-pci: EHCI PCI platform driver | |
[ 2.719464] ehci-platform: EHCI generic platform driver | |
[ 2.724742] ehci-orion: EHCI orion driver | |
[ 2.728825] orion-ehci d005e000.usb: EHCI Host Controller | |
[ 2.734331] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1 | |
[ 2.742541] orion-ehci d005e000.usb: irq 27, io mem 0xd005e000 | |
[ 2.759512] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00 | |
[ 2.766006] hub 1-0:1.0: USB hub found | |
[ 2.769828] hub 1-0:1.0: 1 port detected | |
[ 2.774124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 2.780018] ohci-pci: OHCI PCI platform driver | |
[ 2.784656] ohci-platform: OHCI generic platform driver | |
[ 2.790834] xhci-hcd d0058000.usb3: xHCI Host Controller | |
[ 2.796092] xhci-hcd d0058000.usb3: new USB bus registered, assigned bus number 2 | |
[ 2.803914] xhci-hcd d0058000.usb3: hcc params 0x0a000998 hci version 0x100 quirks 0x00010090 | |
[ 2.812651] xhci-hcd d0058000.usb3: irq 26, io mem 0xd0058000 | |
[ 2.819439] hub 2-0:1.0: USB hub found | |
[ 2.823085] hub 2-0:1.0: 1 port detected | |
[ 2.827928] xhci-hcd d0058000.usb3: xHCI Host Controller | |
[ 2.833168] xhci-hcd d0058000.usb3: new USB bus registered, assigned bus number 3 | |
[ 2.840674] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 2.849422] hub 3-0:1.0: USB hub found | |
[ 2.853220] hub 3-0:1.0: 1 port detected | |
[ 2.857502] usbcore: registered new interface driver uas | |
[ 2.862849] usbcore: registered new interface driver usb-storage | |
[ 2.869078] usbcore: registered new interface driver ums-alauda | |
[ 2.875467] usbcore: registered new interface driver ums-cypress | |
[ 2.881753] usbcore: registered new interface driver ums-datafab | |
[ 2.887575] usbcore: registered new interface driver ums_eneub6250 | |
[ 2.893948] usbcore: registered new interface driver ums-freecom | |
[ 2.900603] usbcore: registered new interface driver ums-isd200 | |
[ 2.906327] usbcore: registered new interface driver ums-jumpshot | |
[ 2.912800] usbcore: registered new interface driver ums-karma | |
[ 2.918994] usbcore: registered new interface driver ums-onetouch | |
[ 2.925035] usbcore: registered new interface driver ums-realtek | |
[ 2.931136] usbcore: registered new interface driver ums-sddr09 | |
[ 2.937418] usbcore: registered new interface driver ums-sddr55 | |
[ 2.943714] usbcore: registered new interface driver ums-usbat | |
[ 2.950784] mousedev: PS/2 mouse device common for all mice | |
[ 2.961204] i2c /dev entries driver | |
[ 2.965450] md: linear personality registered for level -1 | |
[ 2.971154] md: raid0 personality registered for level 0 | |
[ 2.976494] md: raid1 personality registered for level 1 | |
[ 2.981870] md: raid10 personality registered for level 10 | |
[ 2.987558] md: raid6 personality registered for level 6 | |
[ 2.993097] md: raid5 personality registered for level 5 | |
[ 2.998488] md: raid4 personality registered for level 4 | |
[ 3.004736] sdhci: Secure Digital Host Controller Interface driver | |
[ 3.010620] sdhci: Copyright(c) Pierre Ossman | |
[ 3.015647] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 3.019516] ata1: SATA link down (SStatus 0 SControl 300) | |
[ 3.027029] xenon-sdhci d00d0000.sdhci: Got CD GPIO | |
[ 3.031699] xenon-sdhci d00d0000.sdhci: Fail to get Xenon PHY type. Use default eMMC 5.1 PHY | |
[ 3.040862] xenon-sdhci d00d0000.sdhci: No vmmc regulator found | |
[ 3.046725] xenon-sdhci d00d0000.sdhci: No vqmmc regulator found | |
[ 3.087622] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA | |
[ 3.097032] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 3.104871] hidraw: raw HID events driver (C) Jiri Kosina | |
[ 3.113808] NET: Registered protocol family 10 | |
[ 3.123926] NET: Registered protocol family 17 | |
[ 3.129010] Distributed Switch Architecture driver version 0.1 | |
[ 3.146244] libphy: mv88e6xxx SMI: probed | |
[ 3.150301] mdio_bus d0032004.mdio-mi: switch 0x341 probed: Marvell 88E6341, revision 0 | |
[ 3.158587] mvneta d0030000.ethernet eth0: [0]: detected a Marvell 88E6341 switch | |
[ 3.180726] mmc0: new high speed SDHC card at address aaaa | |
[ 3.186744] mmcblk0: mmc0:aaaa SL08G 7.40 GiB | |
[ 3.192349] mmcblk0: p1 | |
[ 3.307574] Generic PHY mv88e6xxx-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=-1) | |
[ 3.387556] Generic PHY mv88e6xxx-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=-1) | |
[ 3.466848] Generic PHY mv88e6xxx-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=-1) | |
[ 3.479337] Key type dns_resolver registered | |
[ 3.485963] registered taskstats version 1 | |
[ 3.497058] Btrfs loaded | |
[ 3.501766] Key type encrypted registered | |
[ 3.507495] hctosys: unable to open rtc device (rtc0) | |
[ 3.516330] md: Waiting for all devices to be available before autodetect | |
[ 3.523636] md: If you don't use raid, use raid=noautodetect | |
[ 3.530575] md: Autodetecting RAID arrays. | |
[ 3.534693] md: Scanned 0 and added 0 devices. | |
[ 3.539356] md: autorun ... | |
[ 3.542329] md: ... autorun DONE. | |
[ 3.546725] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities | |
[ 3.555680] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities | |
[ 3.590131] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) | |
[ 3.598739] VFS: Mounted root (ext4 filesystem) on device 179:1. | |
[ 3.607119] devtmpfs: mounted | |
[ 3.610458] Freeing unused kernel memory: 360K (ffffffc000d20000 - ffffffc000d7a000) | |
[ 3.618423] Freeing alternatives memory: 76K (ffffffc000d7a000 - ffffffc000d8d000) | |
[ 3.998689] systemd[1]: System time before build time, advancing clock. | |
[ 4.029251] random: systemd: uninitialized urandom read (16 bytes read, 9 bits of entropy available) | |
[ 4.041063] random: systemd: uninitialized urandom read (16 bytes read, 9 bits of entropy available) | |
[ 4.054084] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) | |
[ 4.073338] systemd[1]: Detected architecture arm64. |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Marvell>> printenv | |
baudrate=115200 | |
boot_interface=mmc | |
bootargs=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk0p2 rw ip=0.0.0.0:0.0.0.0:10.4.50.254:255.255.255.0:marvell:eth0:none nfsroot=0.0.0.0:/srv/nfs/ | |
bootcmd=mmc dev 0; ext4load mmc 0:1 $kernel_addr $image_name;ext4load mmc 0:1 $initrd_addr $initrd_image; ext4load mmc 0:1 $fdt_addr $fdt_name;setenv bootargs $console root=$rootdev rw rootwait; booti $kernel_addr - $fdt_addr | |
bootdelay=3 | |
console=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 | |
eth1addr=00:00:00:00:51:82 | |
eth2addr=00:00:00:00:51:83 | |
ethact=neta0 | |
ethaddr=F0:AD:4E:03:6B:D5 | |
ethprime=egiga0 | |
fdt_addr=0x1000000 | |
fdt_high=0xffffffffffffffff | |
fdt_name=boot/dtb/marvell/armada-3720-community.dtb | |
gatewayip=10.4.50.254 | |
get_images=mmc dev 0; fatload mmc 0 $kernel_addr $image_name; fatload mmc 0 $fdt_addr $fdt_name; run get_ramfs | |
get_ramfs=if test "${ramfs_name}" != "-"; then setenv ramfs_addr 0x3000000; tftp $ramfs_addr $ramfs_name; else setenv ramfs_addr -;fi | |
hostname=marvell | |
image_name=boot/Image | |
initrd_addr=0xa00000 | |
initrd_size=0x2000000 | |
ipaddr=0.0.0.0 | |
kernel_addr=0x2000000 | |
loadaddr=0x2000000 | |
loads_echo=0 | |
netdev=eth0 | |
netmask=255.255.255.0 | |
ramfs_addr=- | |
ramfs_name=- | |
root=root=/dev/mmcblk0p2 rw | |
rootdev=/dev/mmcblk0p1 | |
rootfstype=ext4 | |
rootpath=/srv/nfs/ | |
serverip=0.0.0.0 | |
set_bootargs=setenv bootargs $console $root ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none nfsroot=$serverip:$rootpath $extra_params | |
stderr=serial | |
stdin=serial | |
stdout=serial | |
verbosity=1 | |
Environment size: 1581/65532 bytes | |
Marvell>> |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Marvell>> setenv boot_interface mmc | |
Marvell>> setenv image_name boot/Image | |
Marvell>> setenv fdt_name boot/dtb/marvell/armada-3720-community.dtb | |
Marvell>> setenv rootdev "/dev/mmcblk0p1" | |
Marvell>> setenv rootfstype "ext4" | |
Marvell>> setenv verbosity "1" | |
Marvell>> setenv bootcmd 'mmc dev 0; ext4load mmc 0:1 $kernel_addr $image_name;ext4load mmc 0:1 $initrd_addr $initrd_image; ext4load mmc 0:1 $fdt_addr $fdt_name;setenv bootargs $console root=$rootdev rw rootwait; booti $kernel_addr - $fdt_addr' |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment