NVIDIA Jetson Nano bootlog.txt

gistfile1.txt

[0008.012] Marked DTB cacheable
[0008.014] Bootloader DTB loaded at 0x83000000
[0008.019] Marked DTB cacheable
[0008.022] Kernel DTB loaded at 0x83100000
[0008.026] DeviceTree Init done
[0008.038] Pinmux applied successfully
[0008.043] gicd_base: 0x50041000
[0008.046] gicc_base: 0x50042000
[0008.049] Interrupts Init done
[0008.053] Using base:0x60005090 & irq:208 for tick-timer
[0008.059] Using base:0x60005098 for delay-timer
[0008.063] platform_init_timer: DONE
[0008.066] Timer(tick) Init done
[0008.070] osc freq = 38400 khz
[0008.074]
[0008.075] welcome to cboot
[0008.078]
[0008.079] Cboot Version: 00.00.2018.01-t210-f76b856b
[0008.084] calling constructors
[0008.087] initializing heap
[0008.090] initializing threads
[0008.092] initializing timers
[0008.095] creating bootstrap completion thread
[0008.100] top of bootstrap2()
[0008.103] CPU: ARM Cortex A57
[0008.105] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000
[0008.110] initializing platform
[0008.113] Scratch reg 37 & 271 initial value set..
[0008.120] cboot:secure-pmc present
[0008.123] Manufacturer: MF = 0xc2, ID MSB = 0x25
[0008.127] ID LSB = 0x36, ID-CFI len = 194 bytes
[0008.132] Macronix QSPI chip present
[0008.135] SPI device register
[0008.138] init boot device
[0008.141] allocating memory for boot device(SPI)
[0008.146] registering boot device
[0008.155] sdmmc node status = okay
[0008.158] sdcard instance = 0
[0008.161] sdcard gpio handle 0x5d
[0008.164] sdcard gpio pin 0xc9
[0008.167] sdcard gpio flags 0x0
[0008.170] vmmc-supply 0x9d
[0008.173] Instance: 0
[0008.175] Allocating memory for context
[0008.179] enabling clock
[0008.181] sd card init
[0008.183] Check card present and stable
[0008.187] Send command 0
[0008.216] Send command 3
[0008.220] Set RCA for the card
[0008.223] Query card specific data by command 9
[0008.229] Parse CSD data
[0008.232] Send command 7
[0008.242] Calling sd device register
[0008.246] Init sdcard
[0008.248] Allocating memory for boot device
[0008.252] Registering user device
[0008.265] Enable APE clock
[0008.268] Un-powergate APE partition
[0008.271] of_register: registering tegra_udc to of_hal
[0008.276] of_register: registering tegra_udc to of_hal
[0008.281] of_register: registering inv20628-driver to of_hal
[0008.287] of_register: registering ads1015-driver to of_hal
[0008.292] of_register: registering lp8557-bl-driver to of_hal
[0008.298] of_register: registering bq2419x_charger to of_hal
[0008.304] of_register: registering cpc to of_hal
[0008.308] of_register: registering bq27441_fuel_gauge to of_hal
[0008.320] gpio framework initialized
[0008.323] of_register: registering tca9539_gpio to of_hal
[0008.329] of_register: registering tca9539_gpio to of_hal
[0008.334] of_register: registering i2c_bus_driver to of_hal
[0008.340] of_register: registering i2c_bus_driver to of_hal
[0008.345] of_register: registering i2c_bus_driver to of_hal
[0008.351] of_register: registering i2c_bus_driver to of_hal
[0008.356] pmic framework initialized
[0008.360] of_register: registering max77620_pmic to of_hal
[0008.365] regulator framework initialized
[0008.369] of_register: registering tps65132_bl_driver to of_hal
[0008.375] initializing target
[0008.381] gpio_driver_register: register 'tegra_gpio_driver' driver
[0008.390] fixed regulator driver initialized
[0008.407] initializing OF layer
[0008.410] NCK carveout not present
[0008.413] Skipping dts_overrides
[0008.418] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0008.433] I2C Bus Init done
[0008.436] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0008.446] I2C Bus Init done
[0008.449] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0008.459] I2C Bus Init done
[0008.462] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0008.472] I2C Bus Init done
[0008.475] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0008.485] I2C Bus Init done
[0008.488] of_children_init: Ops found for compatible string maxim,max77620
[0008.498] max77620_init using irq 118
[0008.503] register 'maxim,max77620' pmic
[0008.507] gpio_driver_register: register 'max77620-gpio' driver
[0008.513] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0008.524] I2C Bus Init done
[0008.527] NCK carveout not present
[0008.530] shim_invoke: No NCT, Calling dts updates
[0008.541] Find /i2c@7000c000's alias i2c0
[0008.545] get eeprom at 1-a0, size 256, type 0
[0008.554] Find /i2c@7000c500's alias i2c2
[0008.558] get eeprom at 3-a0, size 256, type 0
[0008.562] get eeprom at 3-ae, size 256, type 0
[0008.567] pm_ids_update: Updating 1,a0, size 256, type 0
[0008.572] I2C slave not started
[0008.575] I2C write failed
[0008.578] Writing offset failed
[0008.581] eeprom_init: EEPROM read failed
[0008.585] pm_ids_update: eeprom init failed
[0008.589] pm_ids_update: Updating 3,a0, size 256, type 0
[0008.619] pm_ids_update: The pm board id is 3448-0000-200
[0008.625] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
[0008.633] pm_ids_update: pm id update successful
[0008.638] pm_ids_update: Updating 3,ae, size 256, type 0
[0008.668] pm_ids_update: The pm board id is 3449-0000-200
[0008.674] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
[0008.682] pm_ids_update: pm id update successful
[0008.712] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[0008.718] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
[0008.726] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[0008.732] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
[0008.740] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e3:fa:65
[0008.746] Plugin Manager: Parse ODM data 0x00084000
[0008.757] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[0008.777] Find /i2c@7000c000's alias i2c0
[0008.781] get eeprom at 1-a0, size 256, type 0
[0008.790] Find /i2c@7000c500's alias i2c2
[0008.793] get eeprom at 3-a0, size 256, type 0
[0008.798] get eeprom at 3-ae, size 256, type 0
[0008.802] pm_ids_update: Updating 1,a0, size 256, type 0
[0008.808] I2C slave not started
[0008.811] I2C write failed
[0008.813] Writing offset failed
[0008.816] eeprom_init: EEPROM read failed
[0008.820] pm_ids_update: eeprom init failed
[0008.824] pm_ids_update: Updating 3,a0, size 256, type 0
[0008.854] pm_ids_update: The pm board id is 3448-0000-200
[0008.861] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
[0008.868] pm_ids_update: pm id update successful
[0008.872] pm_ids_update: Updating 3,ae, size 256, type 0
[0008.902] pm_ids_update: The pm board id is 3449-0000-200
[0008.909] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
[0008.915] pm_ids_update: pm id update successful
[0008.946] Chip UID is 000000016440b7081c00000013020000
[0008.951] Add serial number:04211190073230000002 as DT property
[0008.959] Applying platform configs
[0008.965] platform-init is not present. Skipping
[0008.970] calling apps_init()
[0008.995] Found 12 GPT partitions in "sd0"
[0008.999] Proceeding to Cold Boot
[0009.002] starting app android_boot_app
[0009.006] Device state: unlocked
[0009.009] display console init
[0009.017] could not find regulator
[0009.041] hdmi cable not connected
[0009.044] is_hdmi_needed: HDMI not connected, returning false
[0009.050] hdmi is not connected
[0009.053] sor0 is not supported
[0009.058] display_console_init: no valid display out_type
[0009.066] subnode volume_up is not found !
[0009.070] subnode back is not found !
[0009.074] subnode volume_down is not found !
[0009.078] subnode menu is not found !
[0009.082] Gpio keyboard init success
[0009.125] found decompressor handler: lz4-legacy
[0009.140] decompressing blob (type 1)...
[0009.173] display_resolution: No display init
[0009.177] Failed to retrieve display resolution
[0009.182] Could not load/initialize BMP blob...ignoring
[0009.233] decompressor handler not found
[0009.237] load_firmware_blob: Firmware blob loaded, entries=2
[0009.242] se_aes_verify_sbk_clear: Error
[0009.246] bl_battery_charging: connected to external power supply
[0009.253] xusb is supported
[0009.259] error while finding nvidia,portmap
[0009.265] could not find regulator
[0009.768] xusb blob version 0 size 126464
[0009.772] firmware size 126464
[0009.777] Firmware timestamp: 0x59fc70d3, Version: 50.20 release
[0009.785] xhci0: 64 bytes context size, 32-bit DMA
[0009.825] usbus0: 5.0Gbps Super Speed USB v3.0
[0009.845] uhub0: <Nvidia XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[0010.495] uhub0: 9 ports with 9 removable, self powered
[0011.495] failed to get HID devices
[0011.499] failed to init xhci or no usb device attached
[0011.506] display_console_ioctl: No display init
[0011.510] switch_backlight failed
[0011.517] device_query_partition_size: failed to open partition sd0:MSC !
[0011.523] MSC Partition not found
[0011.530] device_query_partition_size: failed to open partition sd0:USP !
[0011.536] USP partition read failed!
[0011.540] blob_init: blob-partition USP header read failed
[0011.545] android_boot Unable to update recovery partition
[0011.551] kfs_getpartname: name = LNX
[0011.554] Loading kernel from LNX
[0011.614] Verifying boot image in OdmNonSecureSBK mode
[0011.656] kernel load address: 0x80080000, size: 476936 bytes
[0011.662] ramdisk load address: 0x84100000, size: 0 bytes
[0011.667] load kernel from storage
[0011.679] decompressor handler not found
[0011.736] Successfully loaded kernel and ramdisk images
[0011.742] display_resolution: No display init
[0011.746] Failed to retrieve display resolution
[0011.751] bmp blob is not loaded and initialized
[0011.755] Failed to display boot-logo
[0011.759] NCK carveout not present
[0011.762] Skipping dts_overrides
[0011.765] NCK carveout not present
[0011.768] shim_invoke: No NCT, Calling dts updates
[0011.780] Find /i2c@7000c000's alias i2c0
[0011.783] get eeprom at 1-a0, size 256, type 0
[0011.792] Find /i2c@7000c500's alias i2c2
[0011.796] get eeprom at 3-a0, size 256, type 0
[0011.801] get eeprom at 3-ae, size 256, type 0
[0011.805] pm_ids_update: Updating 1,a0, size 256, type 0
[0011.810] I2C slave not started
[0011.813] I2C write failed
[0011.816] Writing offset failed
[0011.819] eeprom_init: EEPROM read failed
[0011.823] pm_ids_update: eeprom init failed
[0011.827] pm_ids_update: Updating 3,a0, size 256, type 0
[0011.857] pm_ids_update: The pm board id is 3448-0000-200
[0011.864] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
[0011.871] pm_ids_update: pm id update successful
[0011.876] pm_ids_update: Updating 3,ae, size 256, type 0
[0011.906] pm_ids_update: The pm board id is 3449-0000-200
[0011.912] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
[0011.920] pm_ids_update: pm id update successful
[0011.950] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[0011.956] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
[0011.964] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[0011.970] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
[0011.978] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e3:fa:65
[0011.985] Plugin Manager: Parse ODM data 0x00084000
[0011.995] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[0012.009] Add serial number:04211190073230000002 as DT property
[0012.018] "bpmp" doesn't exist, creating
[0012.023] Updated bpmp info to DTB
[0012.028] Updated initrd info to DTB
[0012.031] "proc-board" doesn't exist, creating
[0012.037] Updated board info to DTB
[0012.041] "pmu-board" doesn't exist, creating
[0012.046] Updated board info to DTB
[0012.049] "display-board" doesn't exist, creating
[0012.055] Updated board info to DTB
[0012.059] "reset" doesn't exist, creating
[0012.063] Updated reset info to DTB
[0012.067] display_console_ioctl: No display init
[0012.071] display_console_ioctl: No display init
[0012.076] display_console_ioctl: No display init
[0012.080] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000
[0012.114] DTB cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[0012.125] boot image cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[0012.137] Updated bootarg info to DTB
[0012.141] Adding uuid 000000016440b7081c00000013020000 to DT
[0012.150] device_query_partition_size: failed to open partition sd0:RP6 !
[0012.157] RP6 partition read failed!
[0012.161] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7
[0012.167] Updated memory info to DTB
[0012.173] Updated system-lp0-disable info to DTB
[0012.181] set vdd_core voltage to 1125 mv
[0012.185] setting 'vdd-core' regulator to 1125000 micro volts
[0012.205] could not find regulator
[0012.209] Found secure-pmc; disable BPMP


U-Boot 2016.07-g0eb73f4 (Mar 13 2019 - 00:21:24 -0700)

TEGRA210
Model: NVIDIA P3450-Porg
Board: NVIDIA P3450-PORG
DRAM:  4 GiB
MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
239 bytes read in 112 ms (2 KiB/s)
p3450-porg eMMC boot options
1:      primary kernel
Enter choice: 1:        primary kernel
Retrieving file: /boot/initrd
0 bytes read in 86 ms (0 Bytes/s)
Retrieving file: /boot/Image
34048008 bytes read in 1540 ms (21.1 MiB/s)
append: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000  root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0    root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 root=/dev/mmcblk0p1 rw rootwait
## Flattened Device Tree blob at 83100000
   Booting using the fdt blob at 0x83100000
   reserving fdt memory region: addr=80000000 size=20000
   Using Device Tree in place at 0000000083100000, end 0000000083173e9a

Starting kernel ...

<hit enter to activate fiq debugger>
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3531) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:32:22 PDT 2019
[    0.000000] Boot CPU: AArch64 Processor [411fd071]
[    0.000000] OF: fdt:memory scan node memory@80000000, reg size 48,
[    0.000000] OF: fdt: - 80000000 ,  7ee00000
[    0.000000] OF: fdt: - 100000000 ,  7f200000
[    0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[    0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[    0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[    0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
[    0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
[    0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
[    0.000000] cma: Reserved 64 MiB at 0x00000000fac00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 23 pages/cpu @ffffffc0fefd2000 s53400 r8192 d32616 u94208
[    0.000000] CPU features: enabling workaround for ARM erratum 832075
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1023544
[    0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000  root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0    root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 root=/dev/mmcblk0p1 rw rootwait
[    0.000000] log_buf_len individual max cpu contribution: 32768 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
[    0.000000] log_buf_len min size: 32768 bytes
[    0.000000] log_buf_len: 131072 bytes
[    0.000000] early log buf free: 29492(90%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3576064K/4159488K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 108288K reserved, 475136K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008f50000   ( 15168 KB)
[    0.000000]     .rodata : 0xffffff8008f50000 - 0xffffff80095d0000   (  6656 KB)
[    0.000000]       .init : 0xffffff80095d0000 - 0xffffff8009e20000   (  8512 KB)
[    0.000000]       .data : 0xffffff8009e20000 - 0xffffff800a0f8808   (  2915 KB)
[    0.000000]        .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c   (   606 KB)
[    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000]               0xffffffbf00000000 - 0xffffffbf03fc8000   (    63 MB actual)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc0ff200000   (  4082 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
[    0.000000] t210 clock and reset probe
[    0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
[    0.000000] clk_cbus_recalc_rate: no gbus parent
[    0.000000] clk_cbus_recalc_rate: no gbus parent
[    0.000000] clk_cbus_recalc_rate: no gbus parent
[    0.000000] clk_cbus_recalc_rate: no gbus parent
[    0.000000] clk_cbus_recalc_rate: no gbus parent
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.001480] Console: colour dummy device 80x25
[    0.002334] console [tty0] enabled
[    0.002360] kmemleak: Kernel memory leak detector disabled
[    0.002391] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.002420] pid_max: default: 32768 minimum: 301
[    0.002881] Security Framework initialized
[    0.003113] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003134] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004315] ftrace: allocating 46802 entries in 183 pages
[    0.175843] ASID allocator initialised with 65536 entries
[    0.211301] tegra-id: chipid=22117.
[    0.211340] tegra-id: opt_subrevision=0.
[    0.211368] Tegra Speedo/IDDQ fuse revision 4
[    0.211383] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
[    0.211398] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0
[    0.211413] Tegra: CPU Speedo Value 2045, SoC Speedo Value 1946, GPU Speedo Value 2049
[    0.211433] Tegra: CPU IDDQ Value 1756, SoC IDDQ Value 2036, GPU IDDQ Value 2495
[    0.211468] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0
[    0.211493] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
[    0.211526] DTB Build time: Mar 15 2019 09:52:07
[    0.261051] CPU1: Booted secondary processor [411fd071]
[    0.292949] CPU2: Booted secondary processor [411fd071]
[    0.324943] CPU3: Booted secondary processor [411fd071]
[    0.325033] Brought up 4 CPUs
[    0.325096] SMP: Total of 4 processors activated.
[    0.325114] CPU features: detected feature: 32-bit EL0 Support
[    0.325395] CPU: All CPU(s) started at EL2
[    0.325424] alternatives: patching kernel code
[    0.333397] devtmpfs: initialized
[    0.367015] Initilizing CustomIPI irq domain
[    0.367430] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.367476] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.377958] pinctrl core: initialized pinctrl subsystem
[    0.378588] OS set in device tree is not L4T.
[    0.378990] regulator-dummy: no parameters
[    0.379274] Initializing plugin-manager
[    0.379427] Plugin module not found
[    0.379644] node /plugin-manager/fragement@0 match with board >=3448-0000-100
[    0.380187] node /plugin-manager/fragment@1 match with board >=3448-0000-101
[    0.380961] node /plugin-manager/fragment@5 match with board 3449-0000-200
[    0.384147] NET: Registered protocol family 16
[    0.385572] pstore: using zlib compression
[    0.386208] console [pstore-1] enabled
[    0.386225] pstore: Registered ramoops as persistent store backend
[    0.386244] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
[    0.401066] cpuidle: using governor menu
[    0.404913] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[    0.406457] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000)
[    0.406500] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.409486] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
[    0.411036] tegra_bpmp_of_clk_init: EMC proxy not found.
[    0.411971] tegra_powergate_init: DONE
[    0.412011] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
[    0.412047] DTB Build time: Mar 15 2019 09:52:07
[    0.413659] Tegra reboot handler registered.
[    0.417962] iommu: Adding device tegra-carveouts to group 0
[    0.418132] platform tegra-carveouts: domain=ffffffc0f9bfc318 allocates as[0]=ffffffc0f9b9c0a8
[    0.418490] iommu: Adding device smmu_test to group 1
[    0.418555] platform smmu_test: domain=ffffffc0f9bfc558 allocates as[0]=ffffffc0f9b9c110
[    0.419374] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000
[    0.419447] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000
[    0.419520] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000
[    0.419542] nv-tegra-mc 70019000.mc: No mssnvlink node
[    0.419572] mc-err: mcerr ops are set to t21x
[    0.429244] iommu: Adding device 70090000.xusb to group 2
[    0.429558] iommu: Adding device 70006000.serial to group 3
[    0.429659] platform 70006000.serial: domain=ffffffc0f948c618 allocates as[0]=ffffffc0f9b9c178
[    0.430087] iommu: Adding device 70006040.serial to group 4
[    0.430369] iommu: Adding device 70006200.serial to group 5
[    0.430599] iommu: Adding device sound to group 6
[    0.430664] platform sound: domain=ffffffc0f948cb58 allocates as[0]=ffffffc0f9b9c1e0
[    0.431231] iommu: Adding device 7000d400.spi to group 7
[    0.431511] iommu: Adding device 7000d600.spi to group 8
[    0.431802] iommu: Adding device 70410000.spi to group 9
[    0.432115] iommu: Adding device 50000000.host1x to group 10
[    0.432404] iommu: Adding device 54080000.vi to group 11
[    0.432813] iommu: Adding device 54600000.isp to group 12
[    0.433134] iommu: Adding device 54680000.isp to group 13
[    0.433467] iommu: Adding device tegradc.0 to group 14
[    0.433538] platform tegradc.0: domain=ffffffc0f9499a98 allocates as[0]=ffffffc0f9b9c248
[    0.434076] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
[    0.434409] iommu: Adding device tegradc.1 to group 15
[    0.434474] platform tegradc.1: domain=ffffffc0f9499cd8 allocates as[0]=ffffffc0f9b9c2b0
[    0.435003] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
[    0.435265] iommu: Adding device 54340000.vic to group 16
[    0.435488] iommu: Adding device 544c0000.nvenc to group 17
[    0.435701] iommu: Adding device 54500000.tsec to group 18
[    0.435912] iommu: Adding device 54100000.tsecb to group 19
[    0.436118] iommu: Adding device 54480000.nvdec to group 20
[    0.436351] iommu: Adding device 54380000.nvjpg to group 21
[    0.437470] iommu: Adding device 546c0000.i2c to group 22
[    0.437814] iommu: Adding device 57000000.gpu to group 23
[    0.437882] platform 57000000.gpu: domain=ffffffc0f94a4cd8 allocates as[0]=ffffffc0f9b9c318
[    0.437942] platform 57000000.gpu: domain=ffffffc0f94a4cd8 allocates as[1]=ffffffc0f9b9c380
[    0.438004] platform 57000000.gpu: domain=ffffffc0f94a4cd8 allocates as[2]=ffffffc0f9b9c3e8
[    0.438061] platform 57000000.gpu: domain=ffffffc0f94a4cd8 allocates as[3]=ffffffc0f9b9c450
[    0.438969] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
[    0.439008] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
[    0.439035] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
[    0.439056] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
[    0.439073] tegra-pmc: ### PMC reset status reg: 0x0
[    0.489129] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[    0.489164] tegra-pmc: Clear bootloader IO dpd settings
[    0.489199] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
[    0.489282] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
[    0.489597] iommu: Adding device 70012000.se to group 24
[    0.490378] iommu: Adding device 7000c000.i2c to group 25
[    0.490657] iommu: Adding device 7000c400.i2c to group 26
[    0.490925] iommu: Adding device 7000c500.i2c to group 27
[    0.491192] iommu: Adding device 7000c700.i2c to group 28
[    0.491496] iommu: Adding device 7000d000.i2c to group 29
[    0.491763] iommu: Adding device 7000d100.i2c to group 30
[    0.492066] iommu: Adding device sdhci-tegra.0 to group 31
[    0.492135] platform sdhci-tegra.0: domain=ffffffc0f9534e58 allocates as[0]=ffffffc0f9b9c4b8
[    0.493011] iommu: Adding device 700d0000.xudc to group 32
[    0.497531] vdd-ac-bat: 5000 mV
[    0.497901] vdd-5v0-sys: 5000 mV
[    0.498865] vdd-5v0-hdmi: supplied by vdd-5v0-sys
[    0.498948] vdd-5v0-hdmi: 5000 mV
[    0.499375] vdd-1v8: 1800 mV
[    0.499773] vdd-fan: supplied by vdd-5v0-sys
[    0.499827] vdd-fan: 5000 mV
[    0.500216] vdd-usb-vbus: supplied by vdd-5v0-sys
[    0.500288] vdd-usb-vbus: 5000 mV
[    0.500830] vdd-usb-vbus2: 5000 mV
[    0.537898] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.540379] GPIO line 151 (camera-control-output-low) hogged as output/low
[    0.540754] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
[    0.548616] eventlib_kernel: keventlib is initialized, test id: 0
[    0.549028] SCSI subsystem initialized
[    0.549645] usbcore: registered new interface driver usbfs
[    0.549719] usbcore: registered new interface driver hub
[    0.549815] usbcore: registered new device driver usb
[    0.553929] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
[    0.555623] random: fast init done
[    0.560393] vdd-core: 600 <--> 1162 mV at 1125 mV
[    0.561659] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
[    0.564233] vdd-ddr-1v1: 1150 mV
[    0.568230] vdd-pre-reg-1v35: 1350 mV
[    0.572231] vdd-1v8: 1800 mV
[    0.572511] vdd-1v8: Failed to create debugfs directory
[    0.576230] avdd-sys-1v2: 1200 mV
[    0.580228] vdd-pex-1v0: 1050 mV
[    0.581007] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
[    0.581647] max77620-ldo3: at 3100 mV
[    0.584232] vdd-rtc: 850 <--> 1100 mV at 1000 mV
[    0.584878] max77620-ldo5: at 3100 mV
[    0.585556] max77620-ldo6: at 2800 mV
[    0.588231] avdd-1v05-pll: 1050 mV
[    0.592227] avdd-io-hdmi-dp: 1050 mV
[    0.593773] GPIO line 505 (spmic-default-output-high) hogged as output/high
[    0.594091] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
[    0.596163] max77620 4-003c: max77620 probe successful
[    0.598404] i2c i2c-6: Unbalanced pm_runtime_enable!
[    0.598964] media: Linux media interface: v0.10
[    0.599031] Linux video capture interface: v2.00
[    0.599965] pps_core: LinuxPPS API ver. 1 registered
[    0.599990] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.600031] PTP clock support registered
[    0.603498] tegra_fiq_debugger_init: found FIQ source (IRQ 98)
[    0.609719] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
[    0.610522] Advanced Linux Sound Architecture Driver Initialized.
[    0.611163] Bluetooth: Core ver 2.22
[    0.611233] NET: Registered protocol family 31
[    0.611250] Bluetooth: HCI device and connection manager initialized
[    0.611278] Bluetooth: HCI socket layer initialized
[    0.611300] Bluetooth: L2CAP socket layer initialized
[    0.611355] Bluetooth: SCO socket layer initialized
[    0.613025] tegra210_dvfs: no clock found for sdmmc2_ddr
[    0.613066] tegra210_dvfs: no clock found for sdmmc4_ddr
[    0.613129] tegra210_dvfs: no clock found for sdmmc1_ddr
[    0.613156] tegra210_dvfs: no clock found for sdmmc3_ddr
[    0.615771] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
[    0.617192] vdd-3v3-sys: supplied by vdd-5v0-sys
[    0.617278] vdd-3v3-sys: 3300 mV
[    0.617557] vdd-1v8: supplied by vdd-3v3-sys
[    0.620299] vdd-usb-vbus2: supplied by vdd-3v3-sys
[    0.620772] vdd-3v3-sd: supplied by vdd-3v3-sys
[    0.620849] vdd-3v3-sd: 3300 mV
[    0.622082] avdd-io-edp-1v05: supplied by avdd-1v05-pll
[    0.622141] avdd-io-edp-1v05: 1050 mV
[    0.622620] vdd-usb-hub-en: supplied by vdd-1v8
[    0.622675] vdd-usb-hub-en: 5000 mV
[    0.624052] camchar: rtcpu character device driver loaded
[    0.624820] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1
[    0.626221] clocksource: Switched to clocksource arch_sys_counter
[    0.665334] VFS: Disk quotas dquot_6.6.0
[    0.665506] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.665994] nvmap_heap_init: nvmap_heap_init: created heap block cache
[    0.666481] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
[    0.666534]  dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
[    0.666745] cma: enabled page replacement for spfn=d7000, epfn=f0000
[    0.666770] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
[    0.666798] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
[    0.666846] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
[    0.666873] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
[    0.666907] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
[    0.666928] nvmap_page_pool_init: Total RAM pages: 1012800
[    0.666945] nvmap_page_pool_init: nvmap page pool size: 126600 pages (494 MB)
[    0.667145] nvmap_background_zero_thread: PP zeroing thread starting.
[    0.667490] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[    0.668468] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
[    0.676354] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[    0.676765] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[    0.677042] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[    0.677276] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[    0.677475] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
[    0.677762] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
[    0.677782] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB
[    0.678263] NET: Registered protocol family 2
[    0.679233] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.679471] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.679976] TCP: Hash tables configured (established 32768 bind 32768)
[    0.680137] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.680234] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.680660] NET: Registered protocol family 1
[    0.681491] RPC: Registered named UNIX socket transport module.
[    0.681522] RPC: Registered udp transport module.
[    0.681539] RPC: Registered tcp transport module.
[    0.681556] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.681816] Trying to unpack rootfs image as initramfs...
[    0.690993] host1x 50000000.host1x: initialized
[    0.692776] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.695945] audit: initializing netlink subsys (disabled)
[    0.696038] audit: type=2000 audit(0.547:1): initialized
[    0.696779] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.707338] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.708848] ntfs: driver 2.1.32 [Flags: R/W].
[    0.709647] 9p: Installing v9fs 9p2000 file system support
[    0.713192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[    0.713371] io scheduler noop registered
[    0.713692] io scheduler cfq registered (default)
[    0.716669] gic 702f9000.agic: GIC IRQ controller registered
[    0.719722] iommu: Adding device 702ef000.adsp to group 33
[    0.726558] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
[    0.726736] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
[    0.727328] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x7228c10
[    0.727360] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
[    0.728974] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
[    0.729108] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
[    0.729225] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
[    0.729430] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
[    0.729545] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
[    0.729652] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
[    0.729761] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
[    0.729866] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
[    0.729976] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
[    0.730081] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
[    0.736433] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
[    0.737744] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
[    0.739674] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration
[    0.740982] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
[    0.741342] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes
[    0.742637] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[    0.742880] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000
[    0.743134] Adding domain tsec-pd to PM domain host1x-pd
[    0.745035] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
[    0.745911] tsec 54500000.tsec: initialized
[    0.747587] tsec 54100000.tsecb: initialized
[    0.748329] Adding domain nvdec-pd to PM domain host1x-pd
[    0.751490] nvdec 54480000.nvdec: initialized
[    0.752568] Adding domain vic03-pd to PM domain host1x-pd
[    0.752768] Adding domain msenc-pd to PM domain host1x-pd
[    0.752948] Adding domain nvjpg-pd to PM domain host1x-pd
[    0.756489] falcon 54340000.vic: initialized
[    0.757729] falcon 544c0000.nvenc: initialized
[    0.759091] falcon 54380000.nvjpg: initialized
[    0.763704] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
[    0.763824] display board info: id 0x0, fab 0x0
[    0.763895] generic_infoframe_type: 0x87
[    0.764043] tegradc tegradc.0: DT parsed successfully
[    0.764103] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0
[    0.767532] tegradc tegradc.0: probed
[    0.771693] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
[    0.776537] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels
[    0.777496] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
[    0.777878] kfuse 7000fc00.kfuse: initialized
[    0.779417] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
[    0.780436] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
[    0.781842] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
[    0.781887] vdd-cpu: 708 <--> 1322 mV at 708 mV
[    0.782405] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
[    0.784147] vdd-gpu: applied init 1000000uV constraint
[    0.784177] vdd-gpu: 708 <--> 1323 mV at 997 mV
[    0.784638] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
[    0.789220] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.789412] No Device Node present for smmu client: serial8250 !!
[    0.789443] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[    0.789529] iommu: Adding device serial8250 to group 35
[    0.793095] console [ttyS0] disabled
[    0.793254] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra
[    1.252040] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[    1.656407] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[    2.060773] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[    2.062792] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
[    2.063201] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
[    2.063209] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.063215] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
[    2.063219] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
[    2.063225] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.063645] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.074406] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
[    2.074411] pci 0000:00:02.0: BAR 13: assigned [io  0x1000-0x1fff]
[    2.074422] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit]
[    2.074447] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit]
[    2.074471] pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
[    2.074482] pci 0000:00:02.0: PCI bridge to [bus 01]
[    2.074489] pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
[    2.074496] pci 0000:00:02.0:   bridge window [mem 0x13000000-0x130fffff]
[    2.075277] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[    2.075282] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    3.140994] console [ttyS0] enabled
[    3.141371] Console: switching to colour frame buffer device 80x30
[    3.142533] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART
[    3.142881] serial-tegra 70006200.serial: RX in PIO mode
[    3.142980] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART
[    3.143998] [drm] Initialized
[    3.170447] brd: module loaded
[    3.180815] tegradc tegradc.0: fb registered
[    3.186260] loop: module loaded
[    3.186787] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
[    3.186857] tegradc tegradc.1: No lt-data, using default setting
[    3.186883] tegradc tegradc.1: No hpd-gpio in DT
[    3.186911] tegradc tegradc.1: DT parsed successfully
[    3.186966] tegradc tegradc.1: Display dc.ffffff800f4c0000 registered with id=1
[    3.188393] tegradc tegradc.1: dpd enable lookup fail:-19
[    3.694050] Host read timeout at address 545c00c4
[    3.695209] tegradc tegradc.1: probed
[    3.732577] tegradc tegradc.1: fb registered
[    3.732709] tegra_profiler: version: 1.132, samples/io: 46/26
[    3.732863] tegra_profiler: auth: init
[    3.734257] THERMAL EST: found 2 subdevs
[    3.734264] THERMAL EST num_resources: 0
[    3.734270] [THERMAL EST subdev 0]
[    3.734276] [THERMAL EST subdev 1]
[    3.734733] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
[    3.734735] THERMAL EST: thz register success.
[    3.734892] THERMAL EST: end of probe, return err: 0
[    3.736064] hisi_sas: driver version v1.6
[    3.740227] tegra-qspi 70410000.spi: Prod settings list not found
[    3.742788] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes)
[    3.742796] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0
[    3.749441] libphy: Fixed MDIO Bus: probed
[    3.750114] tun: Universal TUN/TAP device driver, 1.6
[    3.750117] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    3.751344] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.751346] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.751403] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    3.751406] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.751454] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    3.751456] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    3.751502] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
[    3.751505] Copyright(c) 1999 - 2017 Intel Corporation.
[    3.752481] r8168 0000:01:00.0: enabling device (0000 -> 0003)
[    3.752508] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[    3.766687] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
[    3.766845] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e3:fa:65 from device tree
[    3.767443] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    3.767479] r8168  Copyright (C) 2017  Realtek NIC software team <[email protected]>
[    3.767479]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[    3.767479]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[    3.768101] PPP generic driver version 2.4.2
[    3.768318] PPP BSD Compression module registered
[    3.768323] PPP Deflate Compression module registered
[    3.768363] PPP MPPE Compression module registered
[    3.768368] NET: Registered protocol family 24
[    3.768442] usbcore: registered new interface driver r8152
[    3.768494] usbcore: registered new interface driver asix
[    3.768555] usbcore: registered new interface driver ax88179_178a
[    3.768595] usbcore: registered new interface driver cdc_ether
[    3.768631] usbcore: registered new interface driver net1080
[    3.768663] usbcore: registered new interface driver cdc_subset
[    3.768696] usbcore: registered new interface driver zaurus
[    3.768753] usbcore: registered new interface driver cdc_ncm
[    3.768920] VFIO - User Level meta-driver version: 0.3
[    3.770173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.770195] ehci-pci: EHCI PCI platform driver
[    3.770286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.770297] ohci-pci: OHCI PCI platform driver
[    3.770340] ohci-platform: OHCI generic platform driver
[    3.773085] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
[    3.774795] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
[    3.775994] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f97f3000 id
[    3.776090] tegra-xusb 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2
[    3.776093] tegra-xusb 70090000.xusb: Falling back to user helper
[    3.777401] usbcore: registered new interface driver uas
[    3.777526] usbcore: registered new interface driver usb-storage
[    3.777718] usbcore: registered new interface driver usbserial
[    3.782629] tegra-xudc-new 700d0000.xudc: device count: 1
[    3.783958] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
[    3.783973] tegra-xudc-new 700d0000.xudc: vbus state: 1
[    3.783989] tegra-xudc-new 700d0000.xudc: device mode on: 0
[    3.784014] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0
[    3.784035] tegra-xudc-new 700d0000.xudc: active: 0 => 1
[    3.784693] mousedev: PS/2 mouse device common for all mice
[    3.784784] usbcore: registered new interface driver xpad
[    4.032039] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
[    4.044667] rtc rtc1: alarm rtc device
[    4.044685] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[    4.044708] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[    4.045261] i2c /dev entries driver
[    4.046939] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6
[    4.071290] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
[    4.071362] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121)
[    4.071389] imx219 6-0010: board setup failed
[    4.071485] imx219: probe of 6-0010 failed with error -121
[    4.080982] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[    4.122414] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
[    4.122418] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
[    4.122847] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[    4.122864] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
[    4.122872] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
[    4.122996] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[    4.123006] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
[    4.123011] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
[    4.123154] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[    4.123164] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
[    4.123169] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
[    4.123342] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
[    4.124148] tegra_aotag tegra-aotag: Registering sensor 0
[    4.124207] tegra_aotag tegra-aotag: Invalid temp readout
[    4.124231] tegra_aotag tegra-aotag: Invalid temp readout
[    4.124248] tegra_aotag tegra-aotag: Bound to TZ : ID 0
[    4.124257] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
[    4.125155] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[    4.125175] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
[    4.125363] tegra_aotag tegra-aotag: Invalid temp readout
[    4.125394] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
[    4.125839] parse_throttle_dt_data: Num cap clks = 6
[    4.125845] parse_throttle_dt_data: clk=cclk_g type=2
[    4.125860] parse_throttle_dt_data: clk=gpu type=4
[    4.125887] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
[    4.125906] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
[    4.125928] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
[    4.125930] parse_throttle_dt_data: clk=emc type=3
[    4.127368] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[    4.127479] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[    4.127627] tegra_throttle_probe: probe successful. #cdevs=4
[    4.128450] FAN dev name: pwm-fan
[    4.128498] FAN:gpio request success.
[    4.128565] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[    4.128856] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
[    4.129054] pwm_fan_driver pwm-fan: fan tach request irq success
[    4.129064] pwm_fan_driver pwm-fan: tach period: 1000
[    4.129152] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[    4.129157] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[    4.129161] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[    4.129165] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[    4.129169] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[    4.129172] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[    4.129175] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[    4.129179] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[    4.129182] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[    4.129186] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[    4.129784] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds.
[    4.130129] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1)
[    4.131097] device-mapper: uevent: version 1.0.3
[    4.131622] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
[    4.136943] tegra210-cpufreq cpufreq: probe()...completed
[    4.137668] sdhci: Secure Digital Host Controller Interface driver
[    4.137670] sdhci: Copyright(c) Pierre Ossman
[    4.137671] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.138153] sdhci-tegra sdhci-tegra.0: Got CD GPIO
[    4.138532] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
[    4.138652] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300
[    4.142038] tegra-se 70012000.se: tegra_se_probe: complete
[    4.142707] hidraw: raw HID events driver (C) Jiri Kosina
[    4.145427] usbcore: registered new interface driver usbhid
[    4.145428] usbhid: USB HID core driver
[    4.169924] tegra21x_actmon 6000c800.actmon: in actmon_register()...
[    4.170099] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
[    4.171968] nvpmodel: initialized successfully
[    4.173110] usbcore: registered new interface driver snd-usb-audio
[    4.173167] No Device Node present for smmu client: snd-soc-dummy !!
[    4.173171] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[    4.173188] iommu: Adding device snd-soc-dummy to group 36
[    4.206324] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
[    4.206924] OPE platform probe
[    4.207013] OPE platform probe successful
[    4.207398] OPE platform probe
[    4.207479] OPE platform probe successful
[    4.232671] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
[    4.232803] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
[    4.232928] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
[    4.233052] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
[    4.233175] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
[    4.233298] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
[    4.233419] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
[    4.233544] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
[    4.233665] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
[    4.233786] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
[    4.246841] u32 classifier
[    4.246843]     Actions configured
[    4.246917] Initializing XFRM netlink socket
[    4.247769] NET: Registered protocol family 10
[    4.248511] NET: Registered protocol family 17
[    4.248521] NET: Registered protocol family 15
[    4.248594] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.248646] Bluetooth: RFCOMM socket layer initialized
[    4.248654] Bluetooth: RFCOMM ver 1.11
[    4.248658] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.248665] Bluetooth: HIDP socket layer initialized
[    4.248683] 9pnet: Installing 9P2000 support
[    4.248750] Key type dns_resolver registered
[    4.256182] Registered cp15_barrier emulation handler
[    4.256275] Registered setend emulation handler
[    4.257560] registered taskstats version 1
[    4.258141] Adding domain ve2-pd to PM domain host1x-pd
[    4.258407] Adding domain ve-pd to PM domain host1x-pd
[    4.362546] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
[    4.863212] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
[    4.870362] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
[    4.871702] isp 54600000.isp: initialized
[    4.872610] isp 54680000.isp: initialized
[    4.885222] clk_cbus_recalc_rate: no gbus parent
[    4.885227] clk_cbus_round_rate: no gbus parent
[    4.885228] clk_cbus_round_rate: no gbus parent
[    4.885235] clk_cbus_recalc_rate: no gbus parent
[    4.885337] clk_cbus_recalc_rate: no gbus parent
[    4.885340] clk_cbus_round_rate: no gbus parent
[    4.885341] clk_cbus_round_rate: no gbus parent
[    4.885344] clk_cbus_recalc_rate: no gbus parent
[    4.886031] tegra_dvfs: GPU-cap: registered
[    4.886087] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
[    4.886089] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled
[    4.886090] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled
[    4.944834] tegra_dvfs: vdd-gpu-vts: registered
[    4.957913] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
[    4.963420] tegradc tegradc.1: blank - powerdown
[    4.968063] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
[    4.975295] Extcon DP: HPD disabled
[    4.975351] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
[    4.976017] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
[    4.976543] input: gpio-keys as /devices/gpio-keys/input/input1
[    5.002841] hpd: hpd_switch 0
[    5.005812] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
[    5.012437] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
[    5.018366] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
[    5.026307] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:26 UTC (946688426)
[    5.036214] vi 54080000.vi: vi_probe: ++
[    5.045512] vi 54080000.vi: initialized
[    5.051990] vi 54080000.vi: subdev nvcsi--1 bound
[    5.058061] Disable partitions left on by BL
[    5.062339]   disb
[    5.064392] bwmgr: missing cdev-type property
[    5.068855] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[    5.078210] DRAM derating cdev registered.
[    5.083306] vdd-1v8: disabling
[    5.086374] vdd-fan: disabling
[    5.089422] vdd-usb-vbus: disabling
[    5.092910] vdd-usb-vbus2: disabling
[    5.096494] avdd-io-edp-1v05: disabling
[    5.100328] vdd-usb-hub-en: disabling
[    5.104145] ALSA device list:
[    5.107130]   #0: tegra-hda at 0x70038000 irq 83
[    5.111766]   #1: tegra-snd-t210ref-mobile-rt565x
[    5.116656] Waiting for root device /dev/mmcblk0p1...
[    5.241282] mmc0: hw tuning done ...
[    5.244895] mmc0: new ultra high speed SDR50 SDHC card at address aaaa
[    5.251829] mmcblk0: mmc0:aaaa SL32G 29.7 GiB
[    5.281693]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
[    5.352189] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    5.360303] VFS: Mounted root (ext4 filesystem) on device 179:1.
[    5.370122] devtmpfs: mounted
[    5.376150] Freeing unused kernel memory: 8512K
[    5.752843] systemd[1]: System time before build time, advancing clock.
[    5.809911] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.828682] cgroup: cgroup2: unknown option "nsdelegate"
[    5.857809] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.879908] systemd[1]: Detected architecture arm64.
[    5.907319] systemd[1]: Set hostname to <jetson-nano1>.
[    6.045373] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    6.062421] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    6.271848] random: systemd: uninitialized urandom read (16 bytes read)
[    6.278513] systemd[1]: Reached target Swap.
[    6.283137] random: systemd: uninitialized urandom read (16 bytes read)
[    6.289781] systemd[1]: Reached target User and Group Name Lookups.
[    6.296315] random: systemd: uninitialized urandom read (16 bytes read)
[    6.304795] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.314515] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.324099] systemd[1]: Created slice System Slice.
[    6.415788] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[    6.577912] systemd-journald[1905]: Received request to flush runtime journal from PID 1
[    6.622024] nvgpu: 57000000.gpu           gm20b_init_clk_setup_sw:1268 [INFO]  GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
[    7.684732] random: crng init done
[    7.688141] random: 7 urandom warning(s) missed due to ratelimiting
[    8.196316] using random self ethernet address
[    8.201119] using random host ethernet address
[    8.390156] using random self ethernet address
[    8.394660] using random host ethernet address
[   14.025338] Bridge firewalling registered

Ubuntu 18.04.2 LTS jetson-nano1 ttyS0

jetson-nano1 login: pirate
Password:
Last login: ven. avril  5 21:09:47 CEST 2019 on ttyS0
Welcome to Ubuntu 18.04.2 LTS (GNU/Linux 4.9.140-tegra aarch64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage

 * Ubuntu's Kubernetes 1.14 distributions can bypass Docker and use containerd
   directly, see https://bit.ly/ubuntu-containerd or try it now with

     snap install microk8s --classic
This system has been minimized by removing packages and content that are
not required on a system that users do not log into.

To restore this content, you can run the 'unminimize' command.

12 packages can be updated.
0 updates are security updates.

pirate@jetson-nano1:~$ uname -a
Linux jetson-nano1 4.9.140-tegra #1 SMP PREEMPT Wed Mar 13 00:32:22 PDT 2019 aarch64 aarch64 aarch64 GNU/Linux
pirate@jetson-nano1:~$ cat /etc/os-release
NAME="Ubuntu"
VERSION="18.04.2 LTS (Bionic Beaver)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 18.04.2 LTS"
VERSION_ID="18.04"
HOME_URL="https://www.ubuntu.com/"
SUPPORT_URL="https://help.ubuntu.com/"
BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"
PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"
VERSION_CODENAME=bionic
UBUNTU_CODENAME=bionic
pirate@jetson-nano1:~$
pirate@jetson-nano1:~$ exit
logout

Ubuntu 18.04.2 LTS jetson-nano1 ttyS0

jetson-nano1 login: