Created
January 22, 2016 08:39
-
-
Save DieterReuter/93a5d10dae6a62911b71 to your computer and use it in GitHub Desktop.
First boot log for HypriotOS/arm64 on the Pine A64+
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
HELLO! BOOT0 is starting! | |
boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f | |
boot0 version : 4.0.0 | |
set pll start | |
set pll end | |
rtc[0] value = 0x00000000 | |
rtc[1] value = 0x00000000 | |
rtc[2] value = 0x00000000 | |
rtc[3] value = 0x0000a102 | |
rtc[4] value = 0x00000000 | |
rtc[5] value = 0x00000000 | |
DRAM driver version: V1.1 | |
rsb_send_initseq: rsb clk 400Khz -> 3Mhz | |
PMU: AXP81X | |
ddr voltage = 1500 mv | |
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3) | |
DRAM clk = 672 MHz | |
DRAM zq value: 003b3bbb | |
DRAM single rank full DQ OK | |
DRAM size = 1024 MB | |
DRAM init ok | |
dram size =1024 | |
card boot number = 0, boot0 copy = 0 | |
card no is 0 | |
sdcard 0 line count 4 | |
[mmc]: mmc driver ver 2015-05-08 20:06 | |
[mmc]: sdc0 spd mode error, 2 | |
[mmc]: Wrong media type 0x00000000 | |
[mmc]: ***Try SD card 0*** | |
[mmc]: HSSDR52/SDR25 4 bit | |
[mmc]: 50000000 Hz | |
[mmc]: 7580 MB | |
[mmc]: ***SD/MMC 0 init OK!!!*** | |
sdcard 0 init ok | |
The size of uboot is 000fc000. | |
sum=a3d52686 | |
src_sum=a3d52686 | |
Succeed in loading uboot from sdmmc flash. | |
boot0: start load other image | |
boot0: Loading BL3-1 | |
Loading file 0 at address 0x40000000,size 0x0000b400 success | |
boot0: Loading scp | |
Loading file 2 at address 0x00040000,size 0x00019c00 success | |
set arisc reset to de-assert state | |
Ready to disable icache. | |
�9=� Configuring SPC Controller | |
NOTICE: BL3-1: v1.0(debug):045061a | |
NOTICE: BL3-1: Built : 14:30:28, Dec 3 2015 | |
NOTICE: BL3-1 commit: 045061a8bb2580cb3fa02e301f52a015040c158f | |
INFO: BL3-1: Initializing runtime services | |
INFO: BL3-1: Preparing for EL3 exit to normal world | |
INFO: BL3-1: Next image address = 0x4a000000 | |
INFO: BL3-1: Next image spsr = 0x1d3 | |
U-Boot 2014.07 (Dec 03 2015 - 14:30:33) Allwinner Technology | |
uboot commit : 045061a8bb2580cb3fa02e301f52a015040c158f | |
rsb: secure monitor exist | |
[ 0.389]pmbus: ready | |
[ 0.391][ARISC] :arisc initialize | |
[ 0.722][ARISC] :arisc_dvfs_cfg_vf_table: support only one vf_table | |
[SCP] :sunxi-arisc driver begin startup 2 | |
[SCP] :arisc_para size:1a8 | |
[SCP] :arisc version: [v0.1.76] | |
[SCP] :sunxi-arisc driver v1.10 is starting | |
[ 0.850][ARISC] :sunxi-arisc driver startup succeeded | |
[ 0.883]PMU: AXP81X | |
[ 0.885]PMU: read AXP81X 84H=0xf6 | |
[ 0.888]PMU: write AXP81X 84H=0xf6 | |
[ 0.892]PMU: AXP81X found | |
bat_vol=0, ratio=100 | |
[ 0.898]PMU: dcdc2 1100 | |
[ 0.902]PMU: cpux 1008 Mhz,AXI=336 Mhz | |
PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz AHB2=300Mhz MBus=400Mhz | |
device_type = 3253, onoff=1 | |
dcdc1_vol = 3300, onoff=1 | |
dcdc2_vol = 1100, onoff=1 | |
dcdc6_vol = 1100, onoff=1 | |
aldo1_vol = 2800, onoff=0 | |
aldo2_vol = 1800, onoff=1 | |
aldo3_vol = 3000, onoff=1 | |
dldo1_vol = 3300, onoff=0 | |
dldo2_vol = 3300, onoff=0 | |
dldo3_vol = 2800, onoff=0 | |
dldo4_vol = 3300, onoff=1 | |
eldo1_vol = 1800, onoff=1 | |
eldo2_vol = 1800, onoff=0 | |
eldo3_vol = 1800, onoff=0 | |
fldo1_vol = 1200, onoff=0 | |
fldo2_vol = 1100, onoff=1 | |
gpio0_vol = 3100, onoff=0 | |
vbus not exist | |
no battery, limit to dc | |
run key detect | |
no key found | |
no uart input | |
DRAM: 1008 MiB | |
fdt addr: 0x76eb70e0 | |
Relocation Offset is: 35f09000 | |
In: serial | |
Out: serial | |
Err: serial | |
gic: sec monitor mode | |
[ 1.211]start | |
drv_disp_init | |
init_clocks: finish init_clocks. | |
enable power vcc-hdmi-33, ret=0 | |
drv_disp_init finish | |
boot_disp.output_disp=0 | |
boot_disp.output_type=1 | |
boot_disp.output_type=4 | |
fetch script data boot_disp.auto_hpd fail | |
disp0 device type(1) enable | |
[ 1.543]end | |
workmode = 0,storage type = 1 | |
[ 1.547]MMC: 0 | |
[mmc]: mmc driver ver 2015-07-29 14:10:00 | |
SUNXI SD/MMC: 0 | |
[mmc]: start mmc_calibrate_delay_unit, don't access device... | |
[mmc]: delay chain cal done, sample: 192(ps) | |
[mmc]: media type 0x0 | |
[mmc]: Wrong media type 0x0 | |
[mmc]: ************Try SD card 0************ | |
[mmc]: host caps: 0x27 | |
[mmc]: MID 03 PSN 28fd86a0 | |
[mmc]: PNM SL08G -- 0x53-4c-30-38-47 | |
[mmc]: PRV 8.0 | |
[mmc]: MDT m-11 y-2014 | |
[mmc]: speed mode : HSSDR52/SDR25 | |
[mmc]: clock : 50000000 Hz | |
[mmc]: bus_width : 4 bit | |
[mmc]: user capacity : 7580 MB | |
[mmc]: ************SD/MMC 0 init OK!!!************ | |
[mmc]: erase_grp_size : 0x1WrBlk*0x200=0x200 Byte | |
[mmc]: secure_feature : 0x0 | |
[mmc]: secure_removal_type : 0x0 | |
[ 1.769]sunxi flash init ok | |
*** Warning - bad CRC, using default environment | |
--------fastboot partitions-------- | |
-total partitions:8- | |
-name- -start- -size- | |
dtb : 100000 10000 | |
altdtb : 200000 10000 | |
bpart : 1000000 6400000 | |
env : 7500000 100000 | |
boot : 7700000 1000000 | |
shell : 8800000 2000000 | |
debug : a900000 1000000 | |
mainline : ba00000 2000000 | |
----------------------------------- | |
base bootcmd=run setargs_nand boot_normal | |
bootcmd set setargs_mmc | |
key 0 | |
recovery key high 12, low 10 | |
fastboot key high 6, low 4 | |
no misc partition is found | |
to be run cmd=run setargs_mmc boot_normal | |
update dtb dram start | |
update dtb dram end | |
serial is: 941051900800041701cb | |
no battery exist | |
sunxi_bmp_logo_display | |
** Unrecognized filesystem type ** | |
sunxi bmp info error : unable to open logo file bootlogo.bmp | |
[ 2.081]inter uboot shell | |
Hit any key to stop autoboot: 0 | |
sunxi#ls -al | |
Unknown command 'ls' - try 'help' | |
sunxi#run load_env | |
[ 59.783]sunxi flash read :offset 7500000, 1048576 bytes OK | |
## Info: input data size = 477 = 0x1DD | |
sunxi#run load_dtb | |
[ 66.317]sunxi flash read :offset 100000, 65536 bytes OK | |
sunxi#run set_cmdline | |
sunxi#setenv kernel_part mainline | |
sunxi#run load_kernel | |
[ 89.107]sunxi flash read :offset ba00000, 33554432 bytes OK | |
sunxi#run boot_kernel | |
Android's image name: Pine64 | |
Kernel load addr 0x41080000 size 11747 KiB | |
[ 95.829]ready to boot | |
prepare for kernel | |
[mmc]: MMC Device 2 not found | |
[mmc]: mmc 2 not find, so not exit | |
Starting kernel ... | |
INFO: BL3-1: Next image address = 0x41080000 | |
INFO: BL3-1: Next image spsr = 0x3c5 | |
Booting Linux on physical CPU 0x0 | |
Initializing cgroup subsys cpu | |
Linux version 4.4.0-rc8 (aprzywara@slackpad) (gcc version 4.9.3 (GCC) ) #21 SMP PREEMPT Wed Jan 20 22:43:20 GMT 2016 | |
Boot CPU: AArch64 Processor [410fd034] | |
earlycon: Early serial console at MMIO32 0x1c28000 (options '') | |
bootconsole [uart0] enabled | |
efi: Getting EFI parameters from FDT: | |
efi: UEFI not found. | |
cma: Reserved 16 MiB at 0x000000007f000000 | |
kasan: KernelAddressSanitizer initialized | |
psci: probing for conduit method from DT. | |
psci: PSCIv0.2 detected in firmware. | |
psci: Using standard PSCI v0.2 function IDs | |
psci: Trusted OS migration not required | |
PERCPU: Embedded 15 pages/cpu @ffffffc03dfaf000 s24576 r8192 d28672 u61440 | |
Detected VIPT I-cache on CPU0 | |
CPU features: enabling workaround for ARM erratum 845719 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254016 | |
Kernel command line: console=ttyS0,115200n8 earlycon=uart,mmio32,0x01c28000 ro root=/dev/mmcblk0p10 rootwait androidboot.serialno=941051900800041701cb androidboot.hardware=sun50iw1p1 | |
log_buf_len individual max cpu contribution: 4096 bytes | |
log_buf_len total cpu_extra contributions: 12288 bytes | |
log_buf_len min size: 16384 bytes | |
log_buf_len: 32768 bytes | |
early log buf free: 14512(88%) | |
PID hash table entries: 4096 (order: 3, 32768 bytes) | |
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) | |
software IO TLB [mem 0x71a00000-0x75a00000] (64MB) mapped at [ffffffc030a00000-ffffffc0349fffff] | |
Memory: 786356K/1032192K available (8098K kernel code, 518K rwdata, 2400K rodata, 636K init, 221K bss, 229452K reserved, 16384K cma-reserved) | |
Virtual kernel memory layout: | |
kasan : 0xffffff8000000000 - 0xffffff9000000000 ( 64 GB) | |
vmalloc : 0xffffff9000010000 - 0xffffffbdbfff0000 ( 182 GB) | |
vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) | |
0xffffffbdc1040000 - 0xffffffbdc2000000 ( 15 MB actual) | |
fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) | |
PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) | |
modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) | |
memory : 0xffffffc000000000 - 0xffffffc03f000000 ( 1008 MB) | |
.init : 0xffffffc000ac3000 - 0xffffffc000b62000 ( 636 KB) | |
.text : 0xffffffc000080000 - 0xffffffc000ac2b34 ( 10507 KB) | |
.data : 0xffffffc000b77000 - 0xffffffc000bf8a00 ( 519 KB) | |
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
Preemptible hierarchical RCU implementation. | |
Build-time adjustment of leaf fanout to 64. | |
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. | |
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 | |
NR_IRQS:64 nr_irqs:64 0 | |
of_fixed_factor_clk_setup Fixed factor clock <pll6d2> must have a clock-div property | |
Architected cp15 timer(s) running at 24.00MHz (virt). | |
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
Console: colour dummy device 80x25 | |
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
pid_max: default: 32768 minimum: 301 | |
Security Framework initialized | |
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) | |
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) | |
Initializing cgroup subsys memory | |
Initializing cgroup subsys hugetlb | |
EFI services will not be available. | |
ASID allocator initialised with 65536 entries | |
Detected VIPT I-cache on CPU1 | |
CPU1: Booted secondary processor [410fd034] | |
Detected VIPT I-cache on CPU2 | |
CPU2: Booted secondary processor [410fd034] | |
Detected VIPT I-cache on CPU3 | |
CPU3: Booted secondary processor [410fd034] | |
Brought up 4 CPUs | |
SMP: Total of 4 processors activated. | |
CPU: All CPU(s) started at EL1 | |
alternatives: patching kernel code | |
devtmpfs: initialized | |
DMI not present or invalid. | |
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
pinctrl core: initialized pinctrl subsystem | |
NET: Registered protocol family 16 | |
cpuidle: using governor ladder | |
cpuidle: using governor menu | |
vdso: 2 pages (1 code @ ffffffc000b7d000, 1 data @ ffffffc000b7c000) | |
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
DMA: preallocated 256 KiB pool for atomic allocations | |
Serial: AMBA PL011 UART driver | |
vgaarb: loaded | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
dmi: Firmware registration failed. | |
clocksource: Switched to clocksource arch_sys_counter | |
NET: Registered protocol family 2 | |
TCP established hash table entries: 8192 (order: 4, 65536 bytes) | |
TCP bind hash table entries: 8192 (order: 5, 131072 bytes) | |
TCP: Hash tables configured (established 8192 bind 8192) | |
UDP hash table entries: 512 (order: 2, 16384 bytes) | |
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
NET: Registered protocol family 1 | |
RPC: Registered named UNIX socket transport module. | |
RPC: Registered udp transport module. | |
RPC: Registered tcp transport module. | |
RPC: Registered tcp NFSv4.1 backchannel transport module. | |
Unpacking initramfs... | |
kvm [1]: HYP mode not available | |
futex hash table entries: 1024 (order: 5, 131072 bytes) | |
audit: initializing netlink subsys (disabled) | |
audit: type=2000 audit(0.452:1): initialized | |
HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
VFS: Disk quotas dquot_6.6.0 | |
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
NFS: Registering the id_resolver key type | |
Key type id_resolver registered | |
Key type id_legacy registered | |
fuse init (API version 7.23) | |
9p: Installing v9fs 9p2000 file system support | |
io scheduler noop registered | |
io scheduler cfq registered (default) | |
a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver | |
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
console [ttyS0] disabled | |
1c28000.uart0: ttyS0 at MMIO 0x1c28000 (irq = 11, base_baud = 1500000) is a U6_16550A | |
console [ttyS0] enabled | |
console [ttyS0] enabled | |
bootconsole [uart0] disabled | |
bootconsole [uart0] disabled | |
msm_serial: driver initialized | |
Unable to detect cache hierarchy from DT for CPU 0 | |
loop: module loaded | |
tun: Universal TUN/TAP device driver, 1.6 | |
tun: (C) 1999-2004 Max Krasnyansky <[email protected]> | |
sky2: driver version 1.30 | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ehci-pci: EHCI PCI platform driver | |
ehci-platform: EHCI generic platform driver | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
ohci-pci: OHCI PCI platform driver | |
ohci-platform: OHCI generic platform driver | |
usbcore: registered new interface driver usb-storage | |
mousedev: PS/2 mouse device common for all mice | |
sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0 | |
sun6i-rtc 1f00000.rtc: RTC enabled | |
/cpus/cpu@0: could not find phandle | |
sdhci: Secure Digital Host Controller Interface driver | |
sdhci: Copyright(c) Pierre Ossman | |
sunxi-mmc 1c0f000.mmc0: No vqmmc regulator found | |
sunxi-mmc 1c0f000.mmc0: Got CD GPIO | |
sunxi-mmc 1c0f000.mmc0: base:0xffffff9000064000 irq:10 | |
sdhci-pltfm: SDHCI platform and OF driver helper | |
ledtrig-cpu: registered to indicate activity on CPUs | |
usbcore: registered new interface driver usbhid | |
usbhid: USB HID core driver | |
NET: Registered protocol family 17 | |
9pnet: Installing 9P2000 support | |
Key type dns_resolver registered | |
registered taskstats version 1 | |
sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:01:51 UTC (111) | |
Waiting for root device /dev/mmcblk0p10... | |
mmc0: host does not support reading read-only switch, assuming write-enable | |
mmc0: new high speed SDHC card at address aaaa | |
mmcblk0: mmc0:aaaa SL08G 7.40 GiB | |
mmcblk0: p1 p2 < p5 p6 p7 p8 p9 p10 > | |
EXT4-fs (mmcblk0p10): couldn't mount as ext3 due to feature incompatibilities | |
EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null) | |
VFS: Mounted root (ext4 filesystem) readonly on device 179:10. | |
devtmpfs: mounted | |
Freeing unused kernel memory: 636K (ffffffc000ac3000 - ffffffc000b62000) | |
Freeing alternatives memory: 60K (ffffffc000b62000 - ffffffc000b71000) | |
random: systemd urandom read with 4 bits of entropy available | |
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) | |
systemd[1]: Detected architecture 'arm64'. | |
Welcome to Debian GNU/Linux 8 (jessie)! | |
systemd[1]: Failed to insert module 'ipv6' | |
systemd[1]: Set hostname to <black-pearl>. | |
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. | |
systemd[1]: Expecting device dev-ttyS0.device... | |
Expecting device dev-ttyS0.device... | |
systemd[1]: Starting Forward Password Requests to Wall Directory Watch. | |
systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
systemd[1]: Starting Remote File Systems (Pre). | |
[ OK ] Reached target Remote File Systems (Pre). | |
systemd[1]: Reached target Remote File Systems (Pre). | |
systemd[1]: Starting Encrypted Volumes. | |
[ OK ] Reached target Encrypted Volumes. | |
systemd[1]: Reached target Encrypted Volumes. | |
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. | |
systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
systemd[1]: Starting Paths. | |
[ OK ] Reached target Paths. | |
systemd[1]: Reached target Paths. | |
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
systemd[1]: Starting Swap. | |
[ OK ] Reached target Swap. | |
systemd[1]: Reached target Swap. | |
systemd[1]: Starting Root Slice. | |
[ OK ] Created slice Root Slice. | |
systemd[1]: Created slice Root Slice. | |
systemd[1]: Starting User and Session Slice. | |
[ OK ] Created slice User and Session Slice. | |
systemd[1]: Created slice User and Session Slice. | |
systemd[1]: Starting Delayed Shutdown Socket. | |
[ OK ] Listening on Delayed Shutdown Socket. | |
systemd[1]: Listening on Delayed Shutdown Socket. | |
systemd[1]: Starting /dev/initctl Compatibility Named Pipe. | |
[ OK ] Listening on /dev/initctl Compatibility Named Pipe. | |
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
systemd[1]: Starting Journal Socket (/dev/log). | |
[ OK ] Listening on Journal Socket (/dev/log). | |
systemd[1]: Listening on Journal Socket (/dev/log). | |
systemd[1]: Starting udev Control Socket. | |
[ OK ] Listening on udev Control Socket. | |
systemd[1]: Listening on udev Control Socket. | |
systemd[1]: Starting udev Kernel Socket. | |
[ OK ] Listening on udev Kernel Socket. | |
systemd[1]: Listening on udev Kernel Socket. | |
systemd[1]: Starting Journal Socket. | |
[ OK ] Listening on Journal Socket. | |
systemd[1]: Listening on Journal Socket. | |
systemd[1]: Starting System Slice. | |
[ OK ] Created slice System Slice. | |
systemd[1]: Created slice System Slice. | |
systemd[1]: Starting system-getty.slice. | |
[ OK ] Created slice system-getty.slice. | |
systemd[1]: Created slice system-getty.slice. | |
systemd[1]: Starting system-serial\x2dgetty.slice. | |
[ OK ] Created slice system-serial\x2dgetty.slice. | |
systemd[1]: Created slice system-serial\x2dgetty.slice. | |
systemd[1]: Starting Increase datagram queue length... | |
Starting Increase datagram queue length... | |
systemd[1]: Starting Load Kernel Modules... | |
Starting Load Kernel Modules... | |
systemd[1]: Started Set Up Additional Binary Formats. | |
systemd[1]: Mounting Debug File System... | |
Mounting Debug File System... | |
systemd[1]: Starting udev Coldplug all Devices... | |
Starting udev Coldplug all Devices... | |
systemd[1]: Mounting Huge Pages File System... | |
Mounting Huge Pages File System... | |
systemd[1]: Started Create list of required static device nodes for the current kernel. | |
systemd[1]: Mounting POSIX Message Queue File System... | |
Mounting POSIX Message Queue File System... | |
systemd[1]: Starting Create Static Device Nodes in /dev... | |
Starting Create Static Device Nodes in /dev... | |
systemd[1]: Starting Slices. | |
[ OK ] Reached target Slices. | |
systemd[1]: Reached target Slices. | |
systemd[1]: Starting Remount Root and Kernel File Systems... | |
Starting Remount Root and Kernel File Systems... | |
[ OK ] Started Load Kernel Modules. | |
systemd[1]: Started Load Kernel Modules. | |
systemd[1]: Mounted Configuration File System. | |
systemd[1]: Starting Apply Kernel Variables... | |
Starting Apply Kernel Variables... | |
systemd[1]: Mounting FUSE Control File System... | |
Mounting FUSE Control File System... | |
[ OK ] Started Remount Root and Kernel File Systems. | |
systemd[1]: Started Remount Root and Kernel File Systems. | |
systemd[1]: Starting Various fixups to make systemd work better on Debian... | |
Starting Various fixups to make systemd work better on Debian... | |
systemd[1]: Starting Load/Save Random Seed... | |
Starting Load/Save Random Seed... | |
[ OK ] Mounted POSIX Message Queue File System. | |
systemd[1]: Mounted POSIX Message Queue File System. | |
[ OK ] Mounted Huge Pages File System. | |
systemd[1]: Mounted Huge Pages File System. | |
[ OK ] Mounted FUSE Control File System. | |
systemd[1]: Mounted FUSE Control File System. | |
[ OK ] Mounted Debug File System. | |
systemd[1]: Mounted Debug File System. | |
[ OK ] Started Increase datagram queue length. | |
systemd[1]: Started Increase datagram queue length. | |
[ OK ] Started Create Static Device Nodes in /dev. | |
systemd[1]: Started Create Static Device Nodes in /dev. | |
[ OK ] Started Apply Kernel Variables. | |
systemd[1]: Started Apply Kernel Variables. | |
systemd[1]: debian-fixup.service: main process exited, code=exited, status=1/FAILURE | |
[FAILED] Failed to start Various fixups to make systemd work better on Debian. | |
See 'systemctl status debian-fixup.service' for details. | |
systemd[1]: Failed to start Various fixups to make systemd work better on Debian. | |
systemd[1]: Unit debian-fixup.service entered failed state. | |
systemd[1]: systemd-random-seed.service: main process exited, code=exited, status=1/FAILURE | |
[FAILED] Failed to start Load/Save Random Seed. | |
See 'systemctl status systemd-random-seed.service' for details. | |
systemd[1]: Failed to start Load/Save Random Seed. | |
systemd[1]: Unit systemd-random-seed.service entered failed state. | |
[ OK ] Started udev Coldplug all Devices. | |
systemd[1]: Started udev Coldplug all Devices. | |
systemd[1]: Starting udev Kernel Device Manager... | |
Starting udev Kernel Device Manager... | |
systemd[1]: Starting Local File Systems (Pre). | |
[ OK ] Reached target Local File Systems (Pre). | |
systemd[1]: Reached target Local File Systems (Pre). | |
systemd[1]: Starting Local File Systems. | |
[ OK ] Reached target Local File Systems. | |
systemd[1]: Reached target Local File Systems. | |
systemd[1]: Starting Remote File Systems. | |
[ OK ] Reached target Remote File Systems. | |
systemd[1]: Reached target Remote File Systems. | |
systemd[1]: Starting Create Volatile Files and Directories... | |
Starting Create Volatile Files and Directories... | |
systemd-udevd[1264]: starting version 215 | |
systemd[1]: Starting LSB: Raise network interfaces.... | |
Starting LSB: Raise network interfaces.... | |
systemd[1]: Starting Syslog Socket. | |
[ OK ] Listening on Syslog Socket. | |
systemd[1]: Listening on Syslog Socket. | |
systemd[1]: Starting Journal Service... | |
Starting Journal Service... | |
[ OK ] Started Journal Service. | |
systemd[1]: Started Journal Service. | |
Starting Trigger Flushing of Journal to Persistent Storage... | |
[ OK ] Started udev Kernel Device Manager. | |
Starting Copy rules generated while the root was ro... | |
[ OK ] Started Copy rules generated while the root was ro. | |
systemd[1]: Unit systemd-journald.service entered failed state. | |
[ OK ] Started Trigger Flushing of Journal to Persistent Storage. | |
systemd[1]: Started Trigger Flushing of Journal to Persistent Storage. | |
systemd[1]: systemd-journald.service has no holdoff time, scheduling restart. | |
[ OK ] Stopped Trigger Flushing of Journal to Persistent Storage. | |
systemd[1]: Stopping Journal Service... | |
Stopping Journal Service... | |
[ OK ] Stopped Journal Service. | |
systemd[1]: Starting Journal Service... | |
Starting Journal Service... | |
[ OK ] Started Journal Service. | |
systemd[1]: Started Journal Service. | |
Starting Trigger Flushing of Journal to Persistent Storage... | |
[ OK ] Started Trigger Flushing of Journal to Persistent Storage. | |
[ OK ] Started Create Volatile Files and Directories. | |
systemd-journald[1284]: Received request to flush runtime journal from PID 1 | |
Starting Network Time Synchronization... | |
[FAILED] Failed to start Network Time Synchronization. | |
See 'systemctl status systemd-timesyncd.service' for details. | |
[ OK ] Reached target System Time Synchronized. | |
Starting Update UTMP about System Boot/Shutdown... | |
[ OK ] Found device /dev/ttyS0. | |
Stopping Network Time Synchronization... | |
[ OK ] Stopped Network Time Synchronization. | |
Starting Network Time Synchronization... | |
[FAILED] Failed to start Network Time Synchronization. | |
See 'systemctl status systemd-timesyncd.service' for details. | |
[ OK ] Started LSB: Raise network interfaces.. | |
[FAILED] Failed to start Update UTMP about System Boot/Shutdown. | |
See 'systemctl status systemd-update-utmp.service' for details. | |
[DEPEND] Dependency failed for Update UTMP about System Runlevel Changes. | |
Stopping Network Time Synchronization... | |
[ OK ] Stopped Network Time Synchronization. | |
Starting Network Time Synchronization... | |
[FAILED] Failed to start Network Time Synchronization. | |
See 'systemctl status systemd-timesyncd.service' for details. | |
[ OK ] Reached target System Initialization. | |
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
[ OK ] Listening on D-Bus System Message Bus Socket. | |
[ OK ] Reached target Sockets. | |
[ OK ] Reached target Timers. | |
[ OK ] Reached target Basic System. | |
Starting Regular background program processing daemon... | |
[ OK ] Started Regular background program processing daemon. | |
Starting Login Service... | |
Starting Avahi mDNS/DNS-SD Stack... | |
Starting D-Bus System Message Bus... | |
[ OK ] Started D-Bus System Message Bus. | |
[ OK ] Started Avahi mDNS/DNS-SD Stack. | |
Starting Network Service... | |
Starting System Logging Service... | |
Starting Permit User Sessions... | |
[ OK ] Started Permit User Sessions. | |
[ OK ] Started Login Service. | |
Stopping Network Time Synchronization... | |
[ OK ] Stopped Network Time Synchronization. | |
Starting Network Time Synchronization... | |
[FAILED] Failed to start Network Time Synchronization. | |
See 'systemctl status systemd-timesyncd.service' for details. | |
Stopping Network Time Synchronization... | |
[ OK ] Stopped Network Time Synchronization. | |
Starting Network Time Synchronization... | |
[FAILED] Failed to start Network Time Synchronization. | |
See 'systemctl status systemd-timesyncd.service' for details. | |
[ OK ] Started Network Service. | |
Stopping Network Time Synchronization... | |
[ OK ] Stopped Network Time Synchronization. | |
Starting Network Time Synchronization... | |
[FAILED] Failed to start Network Time Synchronization. | |
See 'systemctl status systemd-timesyncd.service' for details. | |
Starting Network Name Resolution... | |
[ OK ] Reached target Network. | |
Starting OpenBSD Secure Shell server... | |
[ OK ] Started OpenBSD Secure Shell server. | |
Starting /etc/rc.local Compatibility... | |
[ OK ] Started Network Name Resolution. | |
[ OK ] Started System Logging Service. | |
[ OK ] Started /etc/rc.local Compatibility. | |
Starting Getty on tty1... | |
[ OK ] Started Getty on tty1. | |
Starting Serial Getty on ttyS0... | |
[ OK ] Started Serial Getty on ttyS0. | |
[ OK ] Reached target Login Prompts. | |
[ OK ] Reached target Multi-User System. | |
[ OK ] Reached target Graphical Interface. | |
Debian GNU/Linux 8 black-pearl ttyS0 | |
black-pearl login: | |
Debian GNU/Linux 8 black-pearl ttyS0 | |
black-pearl login: pirate | |
Password: | |
Linux black-pearl 4.4.0-rc8 #21 SMP PREEMPT Wed Jan 20 22:43:20 GMT 2016 aarch64 | |
The programs included with the Debian GNU/Linux system are free software; | |
the exact distribution terms for each program are described in the | |
individual files in /usr/share/doc/*/copyright. | |
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | |
permitted by applicable law. | |
HypriotOS/arm64: pirate@black-pearl in ~ | |
$ | |
HypriotOS/arm64: pirate@black-pearl in ~ | |
$ | |
HypriotOS/arm64: pirate@black-pearl in ~ | |
$ | |
HypriotOS/arm64: pirate@black-pearl in ~ | |
$ ls -al | |
total 24 | |
drwxr-xr-x 2 pirate pirate 4096 Jan 12 2016 . | |
drwxr-xr-x 3 root root 4096 Jan 12 2016 .. | |
-rw-r--r-- 1 pirate pirate 220 Nov 12 2014 .bash_logout | |
-rw-r--r-- 1 pirate pirate 2537 Jan 12 2016 .bash_prompt | |
-rw-r--r-- 1 pirate pirate 570 Jan 12 2016 .bashrc | |
-rw-r--r-- 1 pirate pirate 314 Jan 12 2016 .profile | |
HypriotOS/arm64: pirate@black-pearl in ~ | |
$ uname -a | |
Linux black-pearl 4.4.0-rc8 #21 SMP PREEMPT Wed Jan 20 22:43:20 GMT 2016 aarch64 GNU/Linux | |
HypriotOS/arm64: pirate@black-pearl in ~ | |
$ sudo su - | |
sudo: unable to resolve host black-pearl | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ df -h | |
df: cannot read table of mounted file systems: No such file or directory | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ ifconfig | |
lo Link encap:Local Loopback | |
inet addr:127.0.0.1 Mask:255.0.0.0 | |
UP LOOPBACK RUNNING MTU:65536 Metric:1 | |
RX packets:16 errors:0 dropped:0 overruns:0 frame:0 | |
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 | |
collisions:0 txqueuelen:0 | |
RX bytes:1136 (1.1 KiB) TX bytes:1136 (1.1 KiB) | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ ls -al | |
total 20 | |
drwx------ 2 root root 4096 Jan 12 2016 . | |
drwxr-xr-x 21 root root 4096 Jan 12 2016 .. | |
-rw-r--r-- 1 root root 2537 Jan 12 2016 .bash_prompt | |
-rw-r--r-- 1 root root 570 Jan 12 2016 .bashrc | |
-rw-r--r-- 1 root root 314 Jan 12 2016 .profile | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ ifconfig | |
lo Link encap:Local Loopback | |
inet addr:127.0.0.1 Mask:255.0.0.0 | |
UP LOOPBACK RUNNING MTU:65536 Metric:1 | |
RX packets:16 errors:0 dropped:0 overruns:0 frame:0 | |
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 | |
collisions:0 txqueuelen:0 | |
RX bytes:1136 (1.1 KiB) TX bytes:1136 (1.1 KiB) | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ uname -a | |
Linux black-pearl 4.4.0-rc8 #21 SMP PREEMPT Wed Jan 20 22:43:20 GMT 2016 aarch64 GNU/Linux | |
$ cat /etc/os-release | |
PRETTY_NAME="Debian GNU/Linux 8 (jessie)" | |
NAME="Debian GNU/Linux" | |
VERSION_ID="8" | |
VERSION="8 (jessie)" | |
ID=debian | |
HOME_URL="http://www.debian.org/" | |
SUPPORT_URL="http://www.debian.org/support/" | |
BUG_REPORT_URL="https://bugs.debian.org/" | |
HYPRIOT_OS="HypriotOS/arm64" | |
HYPRIOT_TAG="dirty" | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ cat /proc/meminfo | |
MemTotal: 803436 kB | |
MemFree: 745752 kB | |
MemAvailable: 763156 kB | |
Buffers: 3272 kB | |
Cached: 26416 kB | |
SwapCached: 0 kB | |
Active: 22720 kB | |
Inactive: 17324 kB | |
Active(anon): 10384 kB | |
Inactive(anon): 5244 kB | |
Active(file): 12336 kB | |
Inactive(file): 12080 kB | |
Unevictable: 0 kB | |
Mlocked: 0 kB | |
SwapTotal: 0 kB | |
SwapFree: 0 kB | |
Dirty: 0 kB | |
Writeback: 0 kB | |
AnonPages: 10388 kB | |
Mapped: 12040 kB | |
Shmem: 5276 kB | |
Slab: 11488 kB | |
SReclaimable: 3492 kB | |
SUnreclaim: 7996 kB | |
KernelStack: 1552 kB | |
PageTables: 488 kB | |
NFS_Unstable: 0 kB | |
Bounce: 0 kB | |
WritebackTmp: 0 kB | |
CommitLimit: 401716 kB | |
Committed_AS: 45448 kB | |
VmallocTotal: 191889280 kB | |
VmallocUsed: 0 kB | |
VmallocChunk: 0 kB | |
AnonHugePages: 0 kB | |
CmaTotal: 16384 kB | |
CmaFree: 16124 kB | |
HugePages_Total: 0 | |
HugePages_Free: 0 | |
HugePages_Rsvd: 0 | |
HugePages_Surp: 0 | |
Hugepagesize: 2048 kB | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ dpkg -l | |
Desired=Unknown/Install/Remove/Purge/Hold | |
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend | |
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) | |
||/ Name Version Architecture Description | |
+++-==============-============-============-================================= | |
ii acl 2.2.52-2 arm64 Access control list utilities | |
ii adduser 3.113+nmu3 all add and remove users and groups | |
ii apt 1.0.9.8.1 arm64 commandline package manager | |
ii apt-transport- 1.0.9.8.1 arm64 https download transport for APT | |
ii apt-utils 1.0.9.8.1 arm64 package management related utilit | |
ii avahi-daemon 0.6.31-5 arm64 Avahi mDNS/DNS-SD daemon | |
ii base-files 8+deb8u2 arm64 Debian base system miscellaneous | |
ii base-passwd 3.5.37 arm64 Debian base system master passwor | |
ii bash 4.3-11+b1 arm64 GNU Bourne Again SHell | |
ii bash-completio 1:2.1-4 all programmable completion for the b | |
ii bind9-host 1:9.9.5.dfsg arm64 Version of 'host' bundled with BI | |
ii binutils 2.25-5 arm64 GNU assembler, linker and binary | |
ii bsdmainutils 9.0.6 arm64 collection of more utilities from | |
ii bsdutils 1:2.25.2-6 arm64 basic utilities from 4.4BSD-Lite | |
ii ca-certificate 20141019 all Common CA certificates | |
ii coreutils 8.23-4 arm64 GNU core utilities | |
ii cpio 2.11+dfsg-4. arm64 GNU cpio -- a program to manage a | |
ii cron 3.0pl1-127+d arm64 process scheduling daemon | |
ii curl 7.38.0-4+deb arm64 command line tool for transferrin | |
ii dash 0.5.7-4+b3 arm64 POSIX-compliant shell | |
ii dbus 1.8.20-0+deb arm64 simple interprocess messaging sys | |
ii debconf 1.5.56 all Debian configuration management s | |
ii debconf-i18n 1.5.56 all full internationalization support | |
ii debian-archive 2014.3 all GnuPG archive keys of the Debian | |
ii debianutils 4.4+b3 arm64 Miscellaneous utilities specific | |
ii diffutils 1:3.3-1+b3 arm64 File comparison utilities | |
ii dmsetup 2:1.02.90-2. arm64 Linux Kernel Device Mapper usersp | |
ii dpkg 1.17.26 arm64 Debian package management system | |
ii e2fslibs:arm64 1.42.12-1.1 arm64 ext2/ext3/ext4 file system librar | |
ii e2fsprogs 1.42.12-1.1 arm64 ext2/ext3/ext4 file system utilit | |
ii findutils 4.4.2-9+b3 arm64 utilities for finding files--find | |
ii gcc-4.8-base:a 4.8.4-1 arm64 GCC, the GNU Compiler Collection | |
ii gcc-4.9-base:a 4.9.2-10 arm64 GCC, the GNU Compiler Collection | |
ii git 1:2.1.4-2.1+ arm64 fast, scalable, distributed revis | |
ii git-core 1:2.1.4-2.1+ all fast, scalable, distributed revis | |
ii git-man 1:2.1.4-2.1+ all fast, scalable, distributed revis | |
ii gnupg 1.4.18-7 arm64 GNU privacy guard - a free PGP re | |
ii gpgv 1.4.18-7 arm64 GNU privacy guard - signature ver | |
ii grep 2.20-4.1 arm64 GNU grep, egrep and fgrep | |
ii groff-base 1.22.2-8 arm64 GNU troff text-formatting system | |
ii gzip 1.6-4 arm64 GNU compression utilities | |
ii hostname 3.15+b2 arm64 utility to set/show the host name | |
ii htop 1.0.3-1 arm64 interactive processes viewer | |
ii ifupdown 0.7.53.1 arm64 high level tools to configure net | |
ii init 1.22 arm64 System-V-like init utilities - me | |
ii init-system-he 1.22 all helper tools for all init systems | |
ii initscripts 2.88dsf-59 arm64 scripts for initializing and shut | |
ii insserv 1.14.0-5+b2 arm64 boot sequence organizer using LSB | |
ii iproute2 3.16.0-2 arm64 networking and traffic control to | |
ii iptables 1.4.21-2+b1 arm64 administration tools for packet f | |
ii iputils-ping 3:20121221-5 arm64 Tools to test the reachability of | |
ii isc-dhcp-clien 4.3.1-6 arm64 DHCP client for automatically obt | |
ii isc-dhcp-commo 4.3.1-6 arm64 common files used by all of the i | |
ii kmod 18-3 arm64 tools for managing Linux kernel m | |
ii less 458-3 arm64 pager program similar to more | |
ii libacl1:arm64 2.2.52-2 arm64 Access control list shared librar | |
ii libapt-inst1.5 1.0.9.8.1 arm64 deb package format runtime librar | |
ii libapt-pkg4.12 1.0.9.8.1 arm64 package management runtime librar | |
ii libattr1:arm64 1:2.4.47-2 arm64 Extended attribute shared library | |
ii libaudit-commo 1:2.4-1 all Dynamic library for security audi | |
ii libaudit1:arm6 1:2.4-1+b1 arm64 Dynamic library for security audi | |
ii libavahi-commo 0.6.31-5 arm64 Avahi common data files | |
ii libavahi-commo 0.6.31-5 arm64 Avahi common library | |
ii libavahi-core7 0.6.31-5 arm64 Avahi's embeddable mDNS/DNS-SD li | |
ii libbind9-90 1:9.9.5.dfsg arm64 BIND9 Shared Library used by BIND | |
ii libblkid1:arm6 2.25.2-6 arm64 block device id library | |
ii libboost-iostr 1.55.0+dfsg- arm64 Boost.Iostreams Library | |
ii libbsd0:arm64 0.7.0-2 arm64 utility functions from BSD system | |
ii libbz2-1.0:arm 1.0.6-7+b3 arm64 high-quality block-sorting file c | |
ii libc-bin 2.19-18+deb8 arm64 GNU C Library: Binaries | |
ii libc6:arm64 2.19-18+deb8 arm64 GNU C Library: Shared libraries | |
ii libcap-ng0:arm 0.7.4-2 arm64 An alternate POSIX capabilities l | |
ii libcap2:arm64 1:2.24-8 arm64 POSIX 1003.1e capabilities (libra | |
ii libcap2-bin 1:2.24-8 arm64 POSIX 1003.1e capabilities (utili | |
ii libcomerr2:arm 1.42.12-1.1 arm64 common error description library | |
ii libcryptsetup4 2:1.6.6-5 arm64 disk encryption support - shared | |
ii libcurl3:arm64 7.38.0-4+deb arm64 easy-to-use client-side URL trans | |
ii libcurl3-gnutl 7.38.0-4+deb arm64 easy-to-use client-side URL trans | |
ii libdaemon0:arm 0.14-6 arm64 lightweight C library for daemons | |
ii libdb5.3:arm64 5.3.28-9 arm64 Berkeley v5.3 Database Libraries | |
ii libdbus-1-3:ar 1.8.20-0+deb arm64 simple interprocess messaging sys | |
ii libdebconfclie 0.192 arm64 Debian Configuration Management S | |
ii libdevmapper1. 2:1.02.90-2. arm64 Linux Kernel Device Mapper usersp | |
ii libdns-export1 1:9.9.5.dfsg arm64 Exported DNS Shared Library | |
ii libdns100 1:9.9.5.dfsg arm64 DNS Shared Library used by BIND | |
ii libedit2:arm64 3.1-20140620 arm64 BSD editline and history librarie | |
ii liberror-perl 0.17-1.1 all Perl module for error/exception h | |
ii libestr0 0.1.9-1.1 arm64 Helper functions for handling str | |
ii libexpat1:arm6 2.1.0-6+deb8 arm64 XML parsing C library - runtime l | |
ii libffi6:arm64 3.1-2+b2 arm64 Foreign Function Interface librar | |
ii libgcc1:arm64 1:4.9.2-10 arm64 GCC support library | |
ii libgcrypt20:ar 1.6.3-2 arm64 LGPL Crypto library - runtime lib | |
ii libgdbm3:arm64 1.8.3-13.1 arm64 GNU dbm database routines (runtim | |
ii libgeoip1:arm6 1.6.2-4 arm64 non-DNS IP-to-country resolver li | |
ii libgmp10:arm64 2:6.0.0+dfsg arm64 Multiprecision arithmetic library | |
ii libgnutls-deb0 3.3.8-6+deb8 arm64 GNU TLS library - main runtime li | |
ii libgnutls-open 3.3.8-6+deb8 arm64 GNU TLS library - OpenSSL wrapper | |
ii libgpg-error0: 1.17-3 arm64 library for common error values a | |
ii libgssapi-krb5 1.12.1+dfsg- arm64 MIT Kerberos runtime libraries - | |
ii libhogweed2:ar 2.7.1-5 arm64 low level cryptographic library ( | |
ii libicu52:arm64 52.1-8+deb8u arm64 International Components for Unic | |
ii libidn11:arm64 1.29-1+b2 arm64 GNU Libidn library, implementatio | |
ii libirs-export9 1:9.9.5.dfsg arm64 Exported IRS Shared Library | |
ii libisc-export9 1:9.9.5.dfsg arm64 Exported ISC Shared Library | |
ii libisc95 1:9.9.5.dfsg arm64 ISC Shared Library used by BIND | |
ii libisccc90 1:9.9.5.dfsg arm64 Command Channel Library used by B | |
ii libisccfg-expo 1:9.9.5.dfsg arm64 Exported ISC CFG Shared Library | |
ii libisccfg90 1:9.9.5.dfsg arm64 Config File Handling Library used | |
ii libjson-c2:arm 0.11-4 arm64 JSON manipulation library - share | |
ii libk5crypto3:a 1.12.1+dfsg- arm64 MIT Kerberos runtime libraries - | |
ii libkeyutils1:a 1.5.9-5+b1 arm64 Linux Key Management Utilities (l | |
ii libkmod2:arm64 18-3 arm64 libkmod shared library | |
ii libkrb5-3:arm6 1.12.1+dfsg- arm64 MIT Kerberos runtime libraries | |
ii libkrb5support 1.12.1+dfsg- arm64 MIT Kerberos runtime libraries - | |
ii libldap-2.4-2: 2.4.40+dfsg- arm64 OpenLDAP libraries | |
ii liblocale-gett 1.05-8+b2 arm64 module using libc functions for i | |
ii liblogging-std 1.0.4-1 arm64 easy to use and lightweight loggi | |
ii liblognorm1:ar 1.0.1-3 arm64 Log normalizing library | |
ii liblwres90 1:9.9.5.dfsg arm64 Lightweight Resolver Library used | |
ii liblzma5:arm64 5.1.1alpha+2 arm64 XZ-format compression library | |
ii libmnl0:arm64 1.0.3-5 arm64 minimalistic Netlink communicatio | |
ii libmount1:arm6 2.25.2-6 arm64 device mounting library | |
ii libncurses5:ar 5.9+20140913 arm64 shared libraries for terminal han | |
ii libncursesw5:a 5.9+20140913 arm64 shared libraries for terminal han | |
ii libnetfilter-a 1.0.2-1.1 arm64 Netfilter acct library | |
ii libnettle4:arm 2.7.1-5 arm64 low level cryptographic library ( | |
ii libnewt0.52:ar 0.52.17-1+b1 arm64 Not Erik's Windowing Toolkit - te | |
ii libnfnetlink0: 1.0.1-3 arm64 Netfilter netlink library | |
ii libp11-kit0:ar 0.20.7-1 arm64 Library for loading and coordinat | |
ii libpam-modules 1.1.8-3.1 arm64 Pluggable Authentication Modules | |
ii libpam-modules 1.1.8-3.1 arm64 Pluggable Authentication Modules | |
ii libpam-runtime 1.1.8-3.1 all Runtime support for the PAM libra | |
ii libpam0g:arm64 1.1.8-3.1 arm64 Pluggable Authentication Modules | |
ii libparted2:arm 3.2-7 arm64 disk partition manipulator - shar | |
ii libpcre3:arm64 2:8.35-3.3 arm64 Perl 5 Compatible Regular Express | |
ii libpipeline1:a 1.4.0-1 arm64 pipeline manipulation library | |
ii libpopt0:arm64 1.16-10 arm64 lib for parsing cmdline parameter | |
ii libprocps3:arm 2:3.3.9-9 arm64 library for accessing process inf | |
ii libpsl0:arm64 0.5.1-1 arm64 Library for Public Suffix List (s | |
ii libreadline6:a 6.3-8+b3 arm64 GNU readline and history librarie | |
ii librtmp1:arm64 2.4+20150115 arm64 toolkit for RTMP streams (shared | |
ii libsasl2-2:arm 2.1.26.dfsg1 arm64 Cyrus SASL - authentication abstr | |
ii libsasl2-modul 2.1.26.dfsg1 arm64 Cyrus SASL - pluggable authentica | |
ii libselinux1:ar 2.3-2 arm64 SELinux runtime shared libraries | |
ii libsemanage-co 2.3-1 all Common files for SELinux policy m | |
ii libsemanage1:a 2.3-1+b2 arm64 SELinux policy management library | |
ii libsepol1:arm6 2.3-2 arm64 SELinux library for manipulating | |
ii libsigc++-2.0- 2.4.0-1 arm64 type-safe Signal Framework for C+ | |
ii libslang2:arm6 2.3.0-2 arm64 S-Lang programming library - runt | |
ii libsmartcols1: 2.25.2-6 arm64 smart column output alignment lib | |
ii libss2:arm64 1.42.12-1.1 arm64 command-line interface parsing li | |
ii libssh2-1:arm6 1.4.3-4.1 arm64 SSH2 client-side library | |
ii libssl1.0.0:ar 1.0.1k-3+deb arm64 Secure Sockets Layer toolkit - sh | |
ii libstdc++6:arm 4.9.2-10 arm64 GNU Standard C++ Library v3 | |
ii libsystemd0:ar 215-17+deb8u arm64 systemd utility library | |
ii libtasn1-6:arm 4.2-3+deb8u1 arm64 Manage ASN.1 structures (runtime) | |
ii libtext-charwi 0.04-7+b1 arm64 get display widths of characters | |
ii libtext-iconv- 1.7-5+b1 arm64 converts between character sets i | |
ii libtext-wrapi1 0.06-7 all internationalized substitute of T | |
ii libtinfo5:arm6 5.9+20140913 arm64 shared low-level terminfo library | |
ii libudev1:arm64 215-17+deb8u arm64 libudev shared library | |
ii libusb-0.1-4:a 2:0.1.12-25 arm64 userspace USB programming library | |
ii libusb-1.0-0:a 2:1.0.19-1 arm64 userspace USB programming library | |
ii libustr-1.0-1: 1.0.4-3+b2 arm64 Micro string library: shared libr | |
ii libuuid1:arm64 2.25.2-6 arm64 Universally Unique ID library | |
ii libwrap0:arm64 7.6.q-25 arm64 Wietse Venema's TCP wrappers libr | |
ii libxml2:arm64 2.9.1+dfsg1- arm64 GNOME XML library | |
ii libxtables10 1.4.21-2+b1 arm64 netfilter xtables library | |
ii locales 2.19-18+deb8 all GNU C Library: National Language | |
ii login 1:4.2-3 arm64 system login tools | |
ii logrotate 3.8.7-1+b1 arm64 Log rotation utility | |
ii lsb-base 4.1+Debian13 all Linux Standard Base 4.1 init scri | |
ii man-db 2.7.0.2-5 arm64 on-line manual pager | |
ii manpages 3.74-1 all Manual pages about using a GNU/Li | |
ii mawk 1.3.3-17+b2 arm64 a pattern scanning and text proce | |
ii mount 2.25.2-6 arm64 Tools for mounting and manipulati | |
ii multiarch-supp 2.19-18+deb8 arm64 Transitional package to ensure mu | |
ii nano 2.2.6-3 arm64 small, friendly text editor inspi | |
ii ncurses-base 5.9+20140913 all basic terminal type definitions | |
ii ncurses-bin 5.9+20140913 arm64 terminal-related programs and man | |
ii net-tools 1.60-26+b1 arm64 NET-3 networking toolkit | |
ii netbase 5.3 all Basic TCP/IP networking system | |
ii netcat-traditi 1.10-41 arm64 TCP/IP swiss army knife | |
ii nfacct 1.0.1-1.1 arm64 netfilter accounting object tool | |
ii openssh-client 1:6.7p1-5 arm64 secure shell (SSH) client, for se | |
ii openssh-server 1:6.7p1-5 arm64 secure shell (SSH) server, for se | |
ii openssh-sftp-s 1:6.7p1-5 arm64 secure shell (SSH) sftp server mo | |
ii openssl 1.0.1k-3+deb arm64 Secure Sockets Layer toolkit - cr | |
ii parted 3.2-7 arm64 disk partition manipulator | |
ii passwd 1:4.2-3 arm64 change and administer password an | |
ii perl 5.20.2-3+deb arm64 Larry Wall's Practical Extraction | |
ii perl-base 5.20.2-3+deb arm64 minimal Perl system | |
ii perl-modules 5.20.2-3+deb all Core Perl modules | |
ii procps 2:3.3.9-9 arm64 /proc file system utilities | |
ii readline-commo 6.3-8 all GNU readline and history librarie | |
ii rsyslog 8.4.2-1+deb8 arm64 reliable system and kernel loggin | |
ii sed 4.2.2-4+b3 arm64 The GNU sed stream editor | |
ii sensible-utils 0.0.9 all Utilities for sensible alternativ | |
ii startpar 0.59-3+b2 arm64 run processes in parallel and mul | |
ii sudo 1.8.10p3-1+d arm64 Provide limited super user privil | |
ii systemd 215-17+deb8u arm64 system and service manager | |
ii systemd-sysv 215-17+deb8u arm64 system and service manager - SysV | |
ii sysv-rc 2.88dsf-59 all System-V-like runlevel change mec | |
ii sysvinit-utils 2.88dsf-59 arm64 System-V-like utilities | |
ii tar 1.27.1-2+b3 arm64 GNU version of the tar archiving | |
ii tasksel 3.31+deb8u1 all tool for selecting tasks for inst | |
ii tasksel-data 3.31+deb8u1 all official tasks used for installat | |
ii traceroute 1:2.0.20-2+b arm64 Traces the route taken by packets | |
ii tzdata 2015g-0+deb8 all time zone and daylight-saving tim | |
ii udev 215-17+deb8u arm64 /dev/ and hotplug management daem | |
ii usbutils 1:007-2 arm64 Linux USB utilities | |
ii util-linux 2.25.2-6 arm64 Miscellaneous system utilities | |
ii vim-common 2:7.4.488-7 arm64 Vi IMproved - Common files | |
ii vim-tiny 2:7.4.488-7 arm64 Vi IMproved - enhanced vi editor | |
ii wget 1.16-1 arm64 retrieves files from the web | |
ii whiptail 0.52.17-1+b1 arm64 Displays user-friendly dialog box | |
ii zlib1g:arm64 1:1.2.8.dfsg arm64 compression library - runtime | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ uname -a | |
Linux black-pearl 4.4.0-rc8 #21 SMP PREEMPT Wed Jan 20 22:43:20 GMT 2016 aarch64 GNU/Linux | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ ls -al | |
total 20 | |
drwx------ 2 root root 4096 Jan 12 2016 . | |
drwxr-xr-x 21 root root 4096 Jan 12 2016 .. | |
-rw-r--r-- 1 root root 2537 Jan 12 2016 .bash_prompt | |
-rw-r--r-- 1 root root 570 Jan 12 2016 .bashrc | |
-rw-r--r-- 1 root root 314 Jan 12 2016 .profile | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ uptime | |
05:23:23 up 5:21, 1 user, load average: 0.00, 0.01, 0.01 | |
HypriotOS/arm64: root@black-pearl in ~ | |
$ halt | |
Starting Synchronise Hardware Clock to System Clock... | |
[ OK ] Reached target Unmount All Filesystems. | |
[ OK ] Stopped target System Time Synchronized. | |
[ OK ] Stopped target Graph[ OK ] Stopped Regular background program processing daemon. | |
[ OK ] Stopped Login Service. | |
[ OK ] Stopped Avahi mDNS/DNS-SD Stack. | |
[ OK ] Stopped Network Name Resolution. | |
[ OK ] Stopped System Logging Service. | |
[ OK ] Stopped OpenBSD Secure Shell server. | |
[ OK ] Stopped Getty on tty1. | |
[ OK ] Stopped Serial Getty on ttyS0. | |
[ OK ] Removed slice system-serial\x2dgetty.slice. | |
[ OK ] Removed slice system-getty.slice. | |
Stopping /etc/rc.local Compatibility... | |
[ OK ] Stopped /etc/rc.local Compatibility. | |
Stopping Permit User Sessions... | |
[ OK ] Stopped target Network. | |
Stopping Network Service... | |
[ OK ] Stopped Permit User Sessions. | |
[ OK ] Stopped Network Service. | |
Stopping D-Bus System Message Bus... | |
[ OK ] Stopped target Remote File Systems. | |
[ OK ] Stopped target Remote File Systems (Pre). | |
[ OK ] Stopped D-Bus System Message Bus. | |
[ OK ] Stopped target Basic System. | |
[ OK ] Stopped target Slices. | |
[ OK ] Removed slice User and Session Slice. | |
[ OK ] Stopped target Paths. | |
[ OK ] Stopped target Timers. | |
[ OK ] Stopped target Sockets. | |
[ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. | |
[ OK ] Closed Syslog Socket. | |
[ OK ] Closed D-Bus System Message Bus Socket. | |
[ OK ] Stopped target System Initialization. | |
Stopping Apply Kernel Variables... | |
[ OK ] Stopped Apply Kernel Variables. | |
Stopping Load Kernel Modules... | |
[ OK ] Stopped Load Kernel Modules. | |
Stopping Create Volatile Files and Directories... | |
[ OK ] Stopped Create Volatile Files and Directories. | |
[ OK ] Stopped target Encrypted Volumes. | |
Stopping LSB: Raise network interfaces.... | |
[ OK ] Stopped target Swap. | |
[ OK ] Stopped LSB: Raise network interfaces.. | |
[ OK ] Stopped target Local File Systems. | |
[ OK ] Stopped target Local File Systems (Pre). | |
Stopping Create Static Device Nodes in /dev... | |
[ OK ] Stopped Create Static Device Nodes in /dev. | |
Stopping Remount Root and Kernel File Systems... | |
[ OK ] Stopped Remount Root and Kernel File Systems. | |
[ OK ] Started Synchronise Hardware Clock to System Clock. | |
[ OK ] Reached target Shutdown. | |
systemd-shutdown[1]: Sending SIGTERM to remaining processes... | |
systemd-journald[1284]: Received SIGTERM from PID 1 (systemd-shutdow). | |
systemd-shutdown[1]: Sending SIGKILL to remaining processes... | |
systemd-shutdown[1]: Unmounting file systems. | |
systemd-shutdown[1]: Unmounting /dev/hugepages. | |
systemd-shutdown[1]: Unmounting /sys/fs/fuse/connections. | |
systemd-shutdown[1]: Unmounting /sys/kernel/debug. | |
systemd-shutdown[1]: Unmounting /dev/mqueue. | |
EXT4-fs (mmcblk0p10): re-mounted. Opts: (null) | |
EXT4-fs (mmcblk0p10): re-mounted. Opts: (null) | |
EXT4-fs (mmcblk0p10): re-mounted. Opts: (null) | |
systemd-shutdown[1]: All filesystems unmounted. | |
systemd-shutdown[1]: Deactivating swaps. | |
systemd-shutdown[1]: All swaps deactivated. | |
systemd-shutdown[1]: Detaching loop devices. | |
systemd-shutdown[1]: All loop devices detached. | |
systemd-shutdown[1]: Detaching DM devices. | |
systemd-shutdown[1]: All DM devices detached. | |
systemd-shutdown[1]: Halting system. | |
reboot: System halted | |
OSX: dieter@DietersMacBookPro in ~ | |
🐳 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Such dedication !! You rock.