sudo apt install zsh -y
sh -c "$(curl -fsSL https://raw.github.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"
drauku Drauku
nhthai2005
/ install_zsh_all_in_one.md
Last active
June 30, 2025 23:40
How to install Zsh, Oh-my-zsh, powerlevel10k and zsh plugins on Ubuntu
RikshaDriver
/ 0-compile-r8152-qnap.md
Last active
June 20, 2025 15:57
Compiling Realtek 8152, 8156 and 8157 ( RTL8152 ) drivers for QNAP NAS
Note
This guide was last updated on 17th Feb 2025
Many QNAP NAS devices only come with 1Gbe network interfaces. These devices can easily benefit from a simple network upgrade by connecting the ubiquitious 2.5Gbe USB NICs from Realtek. Unfortunately, some of the older QNAP NAS systems do not support the newer r8156 based 2.5Gbe NICs or r8157 based 5Gbe NICs as they run an older 4.x linux kernel and the r8152 source files included with the older linux kernel are based off an older codebase that predates the 8156/8157 series.
With some elbow grease however, we can build support for the 2.5 & 5 Gbe adapters and easily upgrade functionality.
Kerryliu
/ ugreen_truenas_led.md
Last active
July 5, 2025 18:58
TrueNAS UGREEN DXP4800 Plus Status LED Guide
The following is a quick guide on getting basic status LED functionality working with TrueNAS running on the UGREEN DXP4800 Plus. Theoretically, it should work on all models (with some small revisions to the script), but I only have a DXP4800 Plus. :)
This guide is for cron job that runs a script to update the LEDs every couple minutes, but I'm sure the following can be modified for blinky LEDs as well.
The-Running-Dev
/ removeDependency.sh
Created
November 22, 2024 14:56
How to Remove a Dependency in QNAP Package
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # Resources | |
| # Sample package: https://www.myqnap.org/product/radarr-qbase24/ | |
| # Create a simple package: https://cheng-yuan-hong.gitbook.io/qdk-qpkg-development-kit/creating-a-qpkg-package-using-qdk/creating-a-simple-qpkg-package | |
| # QNAP SDK docs: https://edhongcy.gitbooks.io/qdk-qpkg-development-kit/content/ | |
| # You will need the QNAP SDK, https://github.com/qnap-dev/QDK | |
| # Download the package and put it on your NAS | |
| # SSH into the nas and go to the directory where the package is located | |
| # Create the QNAP build evnironment |
OlderNewer