OpenWRT on Orange Pi Zero using Armbian uBoot and Kernel

OpenWRT.Armbian.OPZ

Guide:

1. Install Armbian_5.24.161216_Orangepizero_Ubuntu_xenial_3.4.113.img onto a uSD card using Win32DiskImager or Ubuntu Disk Image Writer

2. (Optional) Mount the uSD in Ubuntu Laptop and expand the partition using GParted.

3. Delete everything from uSD except /boot, /lib/modules and /lib/firmware.

4. Mount openwrt-15.05.1-sunxi-root.ext4 on Ubuntu using loopback interface on /mnt/openwrt

	#mount -o loop openwrt-15.05.1-sunxi-root.ext4 /mnt/openwrt

5. Copy over the contents of /mnt/openwrt to the root of uSD by merging folders when prompted.

6. Modify /etc/init.d/boot and add 'ulimit -n 10000' before '/sbin/kmloader' command (line39).

7. Change directory to /lib/modules/3.4.113-sun8i - "#cd /lib/modules/3.4.113-sun8i"

8. Create link-ko.sh - "#touch link-ko.sh"

9. Edit link-ko.sh - "#nano link-ko.sh"

10. Copy the below contents into that file, save (Ctrl + O) and close (Ctrl + X) file.

for x in `find -name *.ko`
do
    ln -s $x .
done

11. Then make link-ko.sh executable - "#chmod +x link-ko.sh"

12. Execute link-ko.sh - "#./link-ko.sh"

13. To enable WiFi - #printf "xradio_wlan\nxradio_wlan" >> /etc/modules.d/xradio_wlan

14. Replace Lan section in /etc/config/network with the below. (You can customize the below to suit you LAN and Router configuration.)

Option 1:

config interface 'lan'
	option proto 'static'
	option netmask '255.255.255.0'
	option ipaddr '192.168.1.1'
	option ifname 'eth0'
	
Option 2:

config interface 'lan'
	option proto 'dhcp'
	option ifname 'eth0'


15. Enable wifi radio device, put this into /etc/config/wireless:

config wifi-device radio0
        option type     'mac80211'
        option channel  'auto'
        option path 'platform/soc/1c10000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'

16. Transfer the uSD to OPiZero and power up.

17. 'telnet 192.168.1.1', update password using '#passwd root' and then exit. 

	If you are unable to login, 
	wait for 10 mins to complete first boot up, 
	switch off OPiZero, 
	remove uSD and 
	repeat steps from network configuration using /etc/config/network

18. 'ssh 192.168.1.1' - peace.

Notes: