Winode Instructions

README.md

NOTE: This Gist concerns the old Linode KVM Beta, NOT the current Manager. Please see linode/docs#501 (comment) for more up-to-date instructions.

You will need:

• Windows Server 2012 R2 iso. Obtain from MSDN
• A server with libvirt/virt-manager/KVM/etc set up.
• Fedora-sourced Windows virtio drivers: https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/archive-virtio/virtio-win-0.1.103-2/virtio-win-0.1.103.iso
• A Linode 1GB in the KVM beta, booted into Rescue mode, with a 20GB(20480MB) "raw" image.

On the KVM source, run the following to create a VM:

virt-install --name=Winode --controller type=scsi,model=virtio-scsi --disk path=/dev/LVM/Winode,bus=scsi --graphics spice --vcpus=1 --ram=1024 --network bridge=br1 --os-type=windows --boot cdrom --location=/data/software/OSes/Windows\ Server\ 2012\ R2\ Update\ x64.iso

Assumptions are made about the path of an existing LVM device and the iso location. Open virt-manager. Add a second IDE CDROM device pointing to the virtio iso. Delete the provided NIC and create one using the virtio driver. Set the MAC address to that of the existing Linode(use ip link show to get it).

Boot the VM, and go through the windows installation process slecting a Core install. It will fail to find a disk. Add a driver, and navigate to the second CD drive, viostor/2k12r2/amd64/. It should find the "RHEL Virtio SCSI" driver. Add it, then repeat the process with NetKVM/2k12r2/amd64/ for the network driver. Finish the wizard, and let the VM reboot. It will prompt you for a new password, then login.

In the command prompt provided, enable the EMS(serial management, for Lish):

bcdedit /emssettings EMSPORT:1 EMSBAUDRATE:115200
bcdedit /ems {current} on

Next use the "sconfig" utility. Use option 7 to enable Remote Desktop. Verify the network driver loaded with option 8. Shutdown the VM with option 14.

On your Rescue Mode Linode, run passwd to set a password for root, then service ssh start. From your KVM host, send the disk image up:

# dd if=/dev/LVM/Winode | pv -s 20480M | gzip -1 | ssh [email protected] "gzip -d | dd of=/dev/sda"

In the Linode Dashboard, create a Configuration Profile. Kernel should be set to "Direct Disk". root device of /dev/sda. Disable all of the "Boot Helpers". Try to boot the Linode, watching Lish for any BSOD messages. Ask Eugene on IRC if you have any problems. Good luck!

NOTE: These instructions(excluding the Windows-specific commands, including bcdedit) should be valid for any OS which can be booted under qemu.

Are the ems settings so that lish can produce a prompt?

Hey guys, just produced a draft of a guide to install Windows on Linode:
https://github.com/ClickSimply/docs/blob/windows-on-linode/docs/tools-reference/windows-on-linode/installing-windows-on-linode-vps.md

Huge thanks to Nathan, that command above was the missing piece when I was originally trying to figure this out.

Edit: Fixed the link. :)

Hi ClickSimply, it looks like the link isn't working. Thanks.

@ClickSimply - How stable is this versus running a windows VM on azure or AWS? Have to run windows for IIS servers, and worried about kernel panics and other issues.

Thanks!

I did this as per ClickSimply's document. It works and is very stable. This issue I am having though is that although I have 8 cores from linode, the resulting Windows 10 Pro system sees 2 CPU processors each with 2 cores. I'm still trying to figure out how to fix that. I've already gone to msconfig --> boot --> advanced settings and also there the maximum value that can be selected is 2 processors. I've searched for ideas including something with updating the HAL driver, but I haven't been able to figure this out.

The above steps from Nathan and ClickSimply's tutorial and it's worked out great for me, much appreciated. It worked out of the box with Windows Server 2016, no additional drivers or steps required. I've settled on the latest build of Windows 10 Enterprise and it's working great as my Perforce version control server and remote CI build machine with Visual Studio 2016 and Jenkins CI. I'm keep it up on one of my monitors via Remote Desktop most of the day and half the time, I forget it's a remote box since RDP is working so nice for me. Thanks again.