gistfile1.txt

cli_simple_run_command() [RUN_COMMAND] cmd[00000000803fed60]="=> sf probe 3:0
cli_simple_run_command() [RUN_COMMAND] cmd[00000000803fed60]="cli_simple_run_command() [PROCESS_SEPARATORS] sf probe 3:0
cli_simple_run_command() token: "sf probe 3:0"
cli_simple_process_macros() [PROCESS_MACROS] INPUT len 12: "sf probe 3:0"
cli_simple_process_macros() [PROCESS_MACROS] OUTPUT len 12: "sf probe 3:0"
cli_simple_parse_line() cli_simple_parse_line: "sf probe 3:0"
cli_simple_parse_line() parse_line: nargs=3
spi_find_bus_and_cs() spi_find_bus_and_cs: No bus 3
__of_translate_address() OF: ** translation for device spi@54000000 **
__of_translate_address() OF: bus is default (na=1, ns=1) on bus@52000000
__of_translate_address() OF: parent bus is default (na=1, ns=1) on soc
of_translate_one() OF: no ranges, 1:1 translation
of_translate_one() OF: with offset: 1409286144
__of_translate_address() OF: parent bus is default (na=1, ns=1) on 
of_translate_one() OF: no ranges, 1:1 translation
of_translate_one() OF: with offset: 1409286144
__of_translate_address() OF: reached root node
ofnode_read_u32() ofnode_read_u32: spi-max-frequency: ofnode_read_u32() (not found)
dw_spi_ofdata_to_platdata() dw_spi_ofdata_to_platdata: regs=0000000054000000 max-frequency=500000
clk_set_defaults() clk_set_defaults(spi@54000000)
clk_set_default_parents() clk_set_default_parents: could not read assigned-clock-parents for 000000008039ef40
fdtdec_get_int() fdtdec_get_int: #clock-cells: fdtdec_get_int() 0x1 (1)
uclass_get_device_by_ofnode() Looking for clock-controller
uclass_find_device_by_ofnode() Looking for clock-controller
uclass_find_device_by_ofnode()       - checking clock-controller
uclass_find_device_by_ofnode()    - result for clock-controller: clock-controller (ret=0)
uclass_get_device_by_ofnode()    - result for clock-controller: clock-controller (ret=0)
clk_of_xlate_default() clk_of_xlate_default(clk=00000000803a5920)
clk_request() clk_request(dev=000000008039e6e0, clk=00000000803a5920)
clk_enable() clk_enable(clk=00000000803a5920)
clk_enable() clk_enable(clk=000000008039ffc0)
clk_enable() clk_enable(clk=000000008039f380)
clk_get_rate() clk_get_rate(clk=00000000803a5920)
clk_get_rate() clk_get_rate(clk=000000008039ffc0)
clk_get_parent_rate() clk_get_parent_rate(clk=000000008039fe00)
clk_get_parent() clk_get_parent(clk=000000008039fe00)
dw_spi_get_clk() dw_spi_get_clk: get spi controller clk via device tree: 780000000 Hz
fdtdec_get_int() fdtdec_get_int: #reset-cells: fdtdec_get_int() 0x1 (1)
fdtdec_get_int() fdtdec_get_int: #reset-cells: fdtdec_get_int() 0x1 (1)
uclass_get_device_by_ofnode() Looking for reset-controller
uclass_find_device_by_ofnode() Looking for reset-controller
uclass_find_device_by_ofnode()       - checking reset-controller
uclass_find_device_by_ofnode()    - result for reset-controller: reset-controller (ret=0)
uclass_get_device_by_ofnode()    - result for reset-controller: reset-controller (ret=0)
reset_of_xlate_default() reset_of_xlate_default(reset_ctl=00000000803a5a00)
reset_deassert() reset_deassert(reset_ctl=00000000803a5a00)
spi_hw_init() spi_hw_init: fifo_len=32
ofnode_read_u32() ofnode_read_u32: spi-max-frequency: ofnode_read_u32() (not found)
spi_find_chip_select() spi_find_chip_select: plat=000000008039f100, cs=0
clk_set_defaults() clk_set_defaults(spi-flash@0)
clk_set_default_parents() clk_set_default_parents: could not read assigned-clock-parents for 000000008039f050
spi_flash_std_probe() spi_flash_std_probe: slave=00000000803a59b0, cs=0
dw_spi_set_speed() dw_spi_set_speed: regs=0000000054000000 speed=500000 clk_div=1560
dw_spi_set_mode() dw_spi_set_mode: regs=0000000054000000, mode=0
dw_spi_xfer() dw_spi_xfer: rx=0000000000000000 tx=0000000080399100 len=1 [bytes]
dw_spi_xfer() dw_spi_xfer: cr0=00000007
dw_writer() dw_writer: tx=0x9f
dw_reader() dw_reader: rx=0xff
dw_spi_xfer() dw_spi_xfer: rx=00000000803992a8 tx=0000000000000000 len=6 [bytes]
dw_spi_xfer() dw_spi_xfer: cr0=00000207
dw_writer() dw_writer: tx=0x00
dw_writer() dw_writer: tx=0x00
dw_writer() dw_writer: tx=0x00
dw_writer() dw_writer: tx=0x00
dw_writer() dw_writer: tx=0x00
dw_writer() dw_writer: tx=0x00
dw_reader() dw_reader: rx=0xff
dw_reader() dw_reader: rx=0xff
dw_reader() dw_reader: rx=0xff
dw_reader() dw_reader: rx=0xff
dw_reader() dw_reader: rx=0xff
dw_reader() dw_reader: rx=0xff
spi_mem_exec_op() 9f
spi_mem_exec_op() | [6B in]
spi_mem_exec_op() ff
spi_mem_exec_op() ff
spi_mem_exec_op() ff
spi_mem_exec_op() ff
spi_mem_exec_op() ff
spi_mem_exec_op() ff
spi_mem_exec_op() [ret 0]
unrecognized JEDEC id bytes: ff, ff, ff
spi_get_bus_and_cs() spi_get_bus_and_cs: Error path, created=0, device 'spi-flash@0'
Failed to initialize SPI flash at 3:0 (error -2)
cmd_call() Command failed, result=1