Created using remix-ide: Realtime Ethereum Contract Compiler and Runtime. Load this file by pasting this gists URL or ID at https://remix.ethereum.org/#version=soljson-v0.8.1+commit.df193b15.js&optimize=true&runs=200&gist=

Contracts...MFP-Agent_flattened.sol

// File: Contracts/imports/IERC20.sol


pragma solidity ^0.8.1;

interface IERC20 {
    function decimals() external view returns (uint8);
    function transfer(address to, uint256 amount) external returns (bool);
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
    function approve(address spender, uint256 amount) external returns (bool);
    function allowance(address owner, address spender) external view returns (uint256);
    function balanceOf(address account) external view returns (uint256);
}
// File: Contracts/imports/IERC20Permit.sol


// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// File: Contracts/imports/Address.sol


// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// File: Contracts/imports/SafeERC20.sol


// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
     * 0 before setting it to a non-zero value.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// File: Contracts/MFP-ListingTemplate.sol


pragma solidity ^0.8.1;

// Version: 0.0.5


contract MFPListingTemplate {
    using SafeERC20 for IERC20;

    address public routerAddress;
    address public tokenA;
    address public tokenB;

    struct UpdateType { // Added locally, identical to MFPRouter.sol
        uint8 updateType; // 0 = balance, 1 = buy order, 2 = sell order
        uint256 index;    // orderId or slot index
        uint256 value;    // principal or amount (normalized)
        address addr;     // makerAddress
        address recipient;// recipientAddress
        uint256 maxPrice; // for buy orders
        uint256 minPrice; // for sell orders
    }

    struct VolumeBalance {
        uint256 xBalance;
        uint256 yBalance;
        uint256 xVolume;
        uint256 yVolume;
    }
    struct BuyOrder {
        address makerAddress;
        address recipientAddress;
        uint256 maxPrice;
        uint256 minPrice;
        uint256 pending;
        uint256 filled;
        uint256 timestamp;
        uint256 blockNumber;
        uint8 status; // 0 = cancelled, 1 = pending, 2 = partially filled, 3 = filled
    }
    struct SellOrder {
        address makerAddress;
        address recipientAddress;
        uint256 maxPrice;
        uint256 minPrice;
        uint256 pending;
        uint256 filled;
        uint256 timestamp;
        uint256 blockNumber;
        uint8 status;
    }

    mapping(uint256 => VolumeBalance) public volumeBalances;
    mapping(uint256 => address) public liquidityAddresses;
    mapping(uint256 => uint256) public prices;
    mapping(uint256 => BuyOrder) public buyOrders;
    mapping(uint256 => SellOrder) public sellOrders;
    mapping(uint256 => uint256[]) public pendingBuyOrders;
    mapping(uint256 => uint256[]) public pendingSellOrders;
    mapping(address => uint256[]) public makerPendingOrders;

    event OrderUpdated(uint256 listingId, uint256 orderId, bool isBuy, uint8 status);
    event BalancesUpdated(uint256 listingId, uint256 xBalance, uint256 yBalance);

    function setRouter(address _routerAddress) external {
        require(routerAddress == address(0), "Router already set");
        routerAddress = _routerAddress;
    }

    function setLiquidityAddress(uint256 listingId, address _liquidityAddress) external {
        require(msg.sender == routerAddress, "Router only");
        require(liquidityAddresses[listingId] == address(0), "Liquidity already set");
        liquidityAddresses[listingId] = _liquidityAddress;
    }

    function setTokens(address _tokenA, address _tokenB) external {
        require(msg.sender == routerAddress, "Router only");
        require(tokenA == address(0) && tokenB == address(0), "Tokens already set");
        require(_tokenA != _tokenB, "Tokens must be different");
        tokenA = _tokenA;
        tokenB = _tokenB;
    }

    function update(uint256 listingId, UpdateType[] memory updates) external { // Updated signature
        require(msg.sender == routerAddress, "Router only");
        VolumeBalance storage balances = volumeBalances[listingId];

        for (uint256 i = 0; i < updates.length; i++) {
            UpdateType memory u = updates[i];
            if (u.updateType == 0) { // Balance update
                if (u.index == 0) {
                    balances.xBalance = u.value;
                } else if (u.index == 1) {
                    balances.yBalance = u.value;
                }
            } else if (u.updateType == 1) { // Buy order update
                BuyOrder storage order = buyOrders[u.index];
                if (order.makerAddress == address(0)) { // New order
                    order.makerAddress = u.addr;
                    order.recipientAddress = u.recipient;
                    order.maxPrice = u.maxPrice;
                    order.minPrice = u.minPrice;
                    order.pending = u.value;
                    order.timestamp = block.timestamp;
                    order.blockNumber = block.number;
                    order.status = 1;
                    pendingBuyOrders[listingId].push(u.index);
                    makerPendingOrders[u.addr].push(u.index);
                    emit OrderUpdated(listingId, u.index, true, 1);
                } else if (u.value == 0) { // Cancel order
                    order.status = 0;
                    removePendingOrder(pendingBuyOrders[listingId], u.index);
                    removePendingOrder(makerPendingOrders[u.addr], u.index);
                    emit OrderUpdated(listingId, u.index, true, 0);
                } else if (order.status == 1) { // Fill order
                    require(order.pending >= u.value, "Insufficient pending");
                    order.pending -= u.value;
                    order.filled += u.value;
                    balances.xBalance -= u.value;
                    order.status = order.pending == 0 ? 3 : 2;
                    if (order.pending == 0) {
                        removePendingOrder(pendingBuyOrders[listingId], u.index);
                        removePendingOrder(makerPendingOrders[order.makerAddress], u.index);
                    }
                    emit OrderUpdated(listingId, u.index, true, order.status);
                }
            } else if (u.updateType == 2) { // Sell order update
                SellOrder storage order = sellOrders[u.index];
                if (order.makerAddress == address(0)) { // New order
                    order.makerAddress = u.addr;
                    order.recipientAddress = u.recipient;
                    order.maxPrice = u.maxPrice;
                    order.minPrice = u.minPrice;
                    order.pending = u.value;
                    order.timestamp = block.timestamp;
                    order.blockNumber = block.number;
                    order.status = 1;
                    pendingSellOrders[listingId].push(u.index);
                    makerPendingOrders[u.addr].push(u.index);
                    emit OrderUpdated(listingId, u.index, false, 1);
                } else if (u.value == 0) { // Cancel order
                    order.status = 0;
                    removePendingOrder(pendingSellOrders[listingId], u.index);
                    removePendingOrder(makerPendingOrders[u.addr], u.index);
                    emit OrderUpdated(listingId, u.index, false, 0);
                } else if (order.status == 1) { // Fill order
                    require(order.pending >= u.value, "Insufficient pending");
                    order.pending -= u.value;
                    order.filled += u.value;
                    balances.yBalance -= u.value;
                    order.status = order.pending == 0 ? 3 : 2;
                    if (order.pending == 0) {
                        removePendingOrder(pendingSellOrders[listingId], u.index);
                        removePendingOrder(makerPendingOrders[order.makerAddress], u.index);
                    }
                    emit OrderUpdated(listingId, u.index, false, order.status);
                }
            }
        }

        if (balances.xBalance > 0 && balances.yBalance > 0) {
            prices[listingId] = (balances.xBalance * 1e18) / balances.yBalance;
        }
        emit BalancesUpdated(listingId, balances.xBalance, balances.yBalance);
    }

    function transact(uint256 listingId, address token, uint256 amount, address recipient) external {
        require(msg.sender == routerAddress, "Router only");
        VolumeBalance storage balances = volumeBalances[listingId];
        uint8 decimals = token == address(0) ? 18 : IERC20(token).decimals();
        uint256 normalizedAmount = normalize(amount, decimals);

        if (token == tokenA) {
            require(balances.xBalance >= normalizedAmount, "Insufficient xBalance");
            balances.xBalance -= normalizedAmount;
            balances.xVolume += normalizedAmount;
            if (token == address(0)) {
                (bool success, ) = recipient.call{value: amount}("");
                require(success, "ETH transfer failed");
            } else {
                IERC20(token).safeTransfer(recipient, amount);
            }
        } else if (token == tokenB) {
            require(balances.yBalance >= normalizedAmount, "Insufficient yBalance");
            balances.yBalance -= normalizedAmount;
            balances.yVolume += normalizedAmount;
            if (token == address(0)) {
                (bool success, ) = recipient.call{value: amount}("");
                require(success, "ETH transfer failed");
            } else {
                IERC20(token).safeTransfer(recipient, amount);
            }
        } else {
            revert("Invalid token");
        }
        if (balances.xBalance > 0 && balances.yBalance > 0) {
            prices[listingId] = (balances.xBalance * 1e18) / balances.yBalance;
        }
        emit BalancesUpdated(listingId, balances.xBalance, balances.yBalance);
    }

    function normalize(uint256 amount, uint8 decimals) internal pure returns (uint256) {
        if (decimals == 18) return amount;
        else if (decimals < 18) return amount * 10**(18 - decimals);
        else return amount / 10**(decimals - 18);
    }

    function denormalize(uint256 amount, uint8 decimals) internal pure returns (uint256) {
        if (decimals == 18) return amount;
        else if (decimals < 18) return amount / 10**(18 - decimals);
        else return amount * 10**(decimals - 18);
    }

    function removePendingOrder(uint256[] storage orders, uint256 orderId) internal {
        for (uint256 i = 0; i < orders.length; i++) {
            if (orders[i] == orderId) {
                orders[i] = orders[orders.length - 1];
                orders.pop();
                break;
            }
        }
    }
}
// File: Contracts/MFP-LiquidityTemplate.sol


pragma solidity ^0.8.1;

// Version: 0.0.6


interface IMFPListing {
    function volumeBalances(uint256 listingId) external view returns (
        uint256 xBalance,
        uint256 yBalance,
        uint256 xVolume,
        uint256 yVolume
    );
}

contract MFPLiquidityTemplate {
    using SafeERC20 for IERC20;

    address public routerAddress;
    address public listingAddress;
    address public tokenA;
    address public tokenB;

    struct LiquidityDetails {
        uint256 xLiquid;
        uint256 yLiquid;
        uint256 xFees;
        uint256 yFees;
    }
    struct Slot {
        address depositor;
        address recipient;
        uint256 allocation;
        uint256 dVolume;
        uint256 timestamp;
    }
    mapping(uint256 => LiquidityDetails) public liquidityDetails;
    mapping(uint256 => mapping(uint256 => Slot)) public xLiquiditySlots;
    mapping(uint256 => mapping(uint256 => Slot)) public yLiquiditySlots;
    mapping(uint256 => uint256[]) public activeXLiquiditySlots;
    mapping(uint256 => uint256[]) public activeYLiquiditySlots;
    mapping(address => uint256[]) public userIndex;

    struct UpdateType {
        uint8 updateType; // 0 = balance, 1 = fees, 2 = xSlot, 3 = ySlot
        uint256 index;    // 0 = xFees/xLiquid, 1 = yFees/yLiquid, or slot index
        uint256 value;    // amount or allocation (normalized)
        address addr;     // depositor
        address recipient;// not used
    }

    event LiquidityUpdated(uint256 listingId, uint256 xLiquid, uint256 yLiquid);
    event FeesUpdated(uint256 listingId, uint256 xFees, uint256 yFees);
    event FeesClaimed(uint256 listingId, uint256 liquidityIndex, uint256 xFees, uint256 yFees);

    function setRouter(address _routerAddress) external {
        require(routerAddress == address(0), "Router already set");
        routerAddress = _routerAddress;
    }

    function setListingAddress(address _listingAddress) external {
        require(msg.sender == routerAddress, "Router only");
        require(listingAddress == address(0), "Listing already set");
        listingAddress = _listingAddress;
    }

    function setTokens(address _tokenA, address _tokenB) external {
        require(msg.sender == routerAddress, "Router only");
        require(tokenA == address(0) && tokenB == address(0), "Tokens already set");
        require(_tokenA != _tokenB, "Tokens must be different");
        tokenA = _tokenA;
        tokenB = _tokenB;
    }

    function update(uint256 listingId, UpdateType[] memory updates) external {
        require(msg.sender == routerAddress, "Router only");
        LiquidityDetails storage details = liquidityDetails[listingId];

        for (uint256 i = 0; i < updates.length; i++) {
            UpdateType memory u = updates[i];
            if (u.updateType == 0) { // Balance update
                if (u.index == 0) {
                    details.xLiquid = u.value;
                } else if (u.index == 1) {
                    details.yLiquid = u.value;
                }
            } else if (u.updateType == 1) { // Fee update
                if (u.index == 0) {
                    details.xFees += u.value;
                    emit FeesUpdated(listingId, details.xFees, details.yFees);
                } else if (u.index == 1) {
                    details.yFees += u.value;
                    emit FeesUpdated(listingId, details.xFees, details.yFees);
                }
            } else if (u.updateType == 2) { // xSlot update
                Slot storage slot = xLiquiditySlots[listingId][u.index];
                if (slot.depositor == address(0) && u.addr != address(0)) {
                    slot.depositor = u.addr;
                    slot.timestamp = block.timestamp;
                    activeXLiquiditySlots[listingId].push(u.index);
                    userIndex[u.addr].push(u.index);
                } else if (u.addr == address(0)) {
                    slot.depositor = address(0);
                    slot.allocation = 0;
                    slot.dVolume = 0;
                    for (uint256 j = 0; j < userIndex[slot.depositor].length; j++) {
                        if (userIndex[slot.depositor][j] == u.index) {
                            userIndex[slot.depositor][j] = userIndex[slot.depositor][userIndex[slot.depositor].length - 1];
                            userIndex[slot.depositor].pop();
                            break;
                        }
                    }
                }
                slot.allocation = u.value;
                (, , uint256 xVolume, ) = IMFPListing(listingAddress).volumeBalances(listingId);
                slot.dVolume = xVolume;
                details.xLiquid += u.value;
            } else if (u.updateType == 3) { // ySlot update
                Slot storage slot = yLiquiditySlots[listingId][u.index];
                if (slot.depositor == address(0) && u.addr != address(0)) {
                    slot.depositor = u.addr;
                    slot.timestamp = block.timestamp;
                    activeYLiquiditySlots[listingId].push(u.index);
                    userIndex[u.addr].push(u.index);
                } else if (u.addr == address(0)) {
                    slot.depositor = address(0);
                    slot.allocation = 0;
                    slot.dVolume = 0;
                    for (uint256 j = 0; j < userIndex[slot.depositor].length; j++) {
                        if (userIndex[slot.depositor][j] == u.index) {
                            userIndex[slot.depositor][j] = userIndex[slot.depositor][userIndex[slot.depositor].length - 1];
                            userIndex[slot.depositor].pop();
                            break;
                        }
                    }
                }
                slot.allocation = u.value;
                (, , , uint256 yVolume) = IMFPListing(listingAddress).volumeBalances(listingId);
                slot.dVolume = yVolume;
                details.yLiquid += u.value;
            }
        }
        emit LiquidityUpdated(listingId, details.xLiquid, details.yLiquid);
    }

    function transact(uint256 listingId, address token, uint256 amount, address recipient) external {
        require(msg.sender == routerAddress, "Router only");
        LiquidityDetails storage details = liquidityDetails[listingId];
        uint8 decimals = token == address(0) ? 18 : IERC20(token).decimals();
        uint256 normalizedAmount = normalize(amount, decimals);

        if (token == tokenA) {
            require(details.xLiquid >= normalizedAmount, "Insufficient xLiquid");
            details.xLiquid -= normalizedAmount;
            if (token == address(0)) {
                (bool success, ) = recipient.call{value: amount}("");
                require(success, "ETH transfer failed");
            } else {
                IERC20(token).safeTransfer(recipient, amount);
            }
        } else if (token == tokenB) {
            require(details.yLiquid >= normalizedAmount, "Insufficient yLiquid");
            details.yLiquid -= normalizedAmount;
            if (token == address(0)) {
                (bool success, ) = recipient.call{value: amount}("");
                require(success, "ETH transfer failed");
            } else {
                IERC20(token).safeTransfer(recipient, amount);
            }
        } else {
            revert("Invalid token");
        }
        emit LiquidityUpdated(listingId, details.xLiquid, details.yLiquid);
    }

    function deposit(uint256 listingId, address token, uint256 amount) external payable {
        require(msg.sender == routerAddress, "Router only");
        require(token == tokenA || token == tokenB, "Invalid token");
        uint8 decimals = token == address(0) ? 18 : IERC20(token).decimals();
        uint256 preBalance = token == address(0) ? address(this).balance : IERC20(token).balanceOf(address(this));
        if (token == address(0)) {
            require(msg.value == amount, "Incorrect ETH amount");
        } else {
            IERC20(token).safeTransferFrom(msg.sender, address(this), amount);
        }
        uint256 postBalance = token == address(0) ? address(this).balance : IERC20(token).balanceOf(address(this));
        uint256 receivedAmount = postBalance - preBalance;
        uint256 normalizedAmount = normalize(receivedAmount, decimals);

        UpdateType[] memory updates = new UpdateType[](1);
        uint256 index = token == tokenA ? activeXLiquiditySlots[listingId].length : activeYLiquiditySlots[listingId].length;
        updates[0] = UpdateType(token == tokenA ? 2 : 3, index, normalizedAmount, msg.sender, address(0));
        this.update(listingId, updates);
    }

    function xWithdraw(uint256 listingId, uint256 amount, uint256 index) external {
        Slot storage slot = xLiquiditySlots[listingId][index];
        require(slot.depositor == msg.sender, "Not depositor");
        uint256 withdrawAmount = slot.allocation < amount ? slot.allocation : amount;

        UpdateType[] memory updates = new UpdateType[](1);
        updates[0] = UpdateType(2, index, slot.allocation - withdrawAmount, msg.sender, address(0));
        this.update(listingId, updates);

        this.transact(listingId, tokenA, withdrawAmount, msg.sender);
    }

    function yWithdraw(uint256 listingId, uint256 amount, uint256 index) external {
        Slot storage slot = yLiquiditySlots[listingId][index];
        require(slot.depositor == msg.sender, "Not depositor");
        uint256 withdrawAmount = slot.allocation < amount ? slot.allocation : amount;

        UpdateType[] memory updates = new UpdateType[](1);
        updates[0] = UpdateType(3, index, slot.allocation - withdrawAmount, msg.sender, address(0));
        this.update(listingId, updates);

        this.transact(listingId, tokenB, withdrawAmount, msg.sender);
    }

    function claimFees(uint256 listingId, uint256 liquidityIndex, bool isX, uint256 volume) external {
        LiquidityDetails storage details = liquidityDetails[listingId];
        Slot storage slot = isX ? xLiquiditySlots[listingId][liquidityIndex] : yLiquiditySlots[listingId][liquidityIndex];
        require(slot.depositor == msg.sender, "Not depositor");

        uint256 liquid = isX ? details.xLiquid : details.yLiquid;
        uint256 fees = isX ? details.xFees : details.yFees;
        uint256 allocation = slot.allocation;
        uint256 dVolume = slot.dVolume;

        (uint256 feeShare, UpdateType[] memory updates) = _claimFeeShare(volume, dVolume, liquid, allocation, fees);
        if (feeShare > 0) {
            updates[0] = UpdateType(1, isX ? 0 : 1, fees - feeShare, address(0), address(0));
            updates[1] = UpdateType(isX ? 2 : 3, liquidityIndex, allocation, msg.sender, address(0));
            this.update(listingId, updates);

            this.transact(listingId, isX ? tokenA : tokenB, feeShare, msg.sender);
            emit FeesClaimed(listingId, liquidityIndex, isX ? feeShare : 0, isX ? 0 : feeShare);
        }
    }

    function addFees(uint256 listingId, bool isX, uint256 fee) external {
        require(msg.sender == routerAddress, "Router only");
        UpdateType[] memory feeUpdates = new UpdateType[](1);
        feeUpdates[0] = UpdateType(1, isX ? 0 : 1, fee, address(0), address(0));
        this.update(listingId, feeUpdates);
    }

    function updateLiquidity(uint256 listingId, bool isX, uint256 amount) external {
        require(msg.sender == routerAddress, "Router only");
        LiquidityDetails storage details = liquidityDetails[listingId];
        if (isX) {
            require(details.xLiquid >= amount, "Insufficient xLiquid");
            details.xLiquid -= amount;
        } else {
            require(details.yLiquid >= amount, "Insufficient yLiquid");
            details.yLiquid -= amount;
        }
        emit LiquidityUpdated(listingId, details.xLiquid, details.yLiquid);
    }

    function transferLiquidity(uint256 listingId, uint256 liquidityIndex, address newDepositor) external {
        Slot storage xSlot = xLiquiditySlots[listingId][liquidityIndex];
        require(xSlot.depositor == msg.sender, "Not depositor");

        UpdateType[] memory updates = new UpdateType[](2);
        updates[0] = UpdateType(2, liquidityIndex, xSlot.allocation, newDepositor, address(0));
        updates[1] = UpdateType(3, liquidityIndex, xSlot.allocation, newDepositor, address(0));
        this.update(listingId, updates);
    }

    function normalize(uint256 amount, uint8 decimals) internal pure returns (uint256) {
        if (decimals == 18) return amount;
        else if (decimals < 18) return amount * 10**(18 - decimals);
        else return amount / 10**(decimals - 18);
    }

    function denormalize(uint256 amount, uint8 decimals) internal pure returns (uint256) {
        if (decimals == 18) return amount;
        else if (decimals < 18) return amount / 10**(18 - decimals);
        else return amount * 10**(decimals - 18);
    }

    function _claimFeeShare(
        uint256 volume,
        uint256 dVolume,
        uint256 liquid,
        uint256 allocation,
        uint256 fees
    ) private pure returns (uint256 feeShare, UpdateType[] memory updates) {
        updates = new UpdateType[](2);
        uint256 contributedVolume = volume > dVolume ? volume - dVolume : 0;
        uint256 feesAccrued = (contributedVolume * 5) / 10000;
        uint256 liquidityContribution = liquid > 0 ? (allocation * 1e18) / liquid : 0;
        feeShare = (feesAccrued * liquidityContribution) / 1e18;
        feeShare = feeShare > fees ? fees : feeShare;
        return (feeShare, updates);
    }
}
// File: Contracts/imports/Context.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: Contracts/imports/Ownable.sol


// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: Contracts/MFP-Agent.sol


pragma solidity ^0.8.1;

// Version : 0.0.6




contract MFPAgent is Ownable {
    address public routerAddress;
    uint256 public listingCount;

    struct ListingValidation {
        address listingAddress;
        address liquidityAddress;
        address tokenA;
        address tokenB;
        uint256 xBalance;
        uint256 yBalance;
        uint256 xLiquid;
        uint256 yLiquid;
    }

    mapping(address => mapping(address => bool)) public listedPairs;
    mapping(uint256 => ListingValidation) public listingValidationByIndex;
    mapping(address => uint256) public listingValidationByAddress;
    mapping(address => uint256[]) public listingIndex;

    event ListingCreated(uint256 listingId, address listingAddress, address liquidityAddress);

    function setRouter(address _routerAddress) external onlyOwner {
        require(_routerAddress != address(0), "Invalid router address");
        routerAddress = _routerAddress;
    }

    function listToken(address tokenA, address tokenB) external returns (address listingAddress, address liquidityAddress) {
        require(tokenA != tokenB, "Identical tokens");
        require(!listedPairs[tokenA][tokenB], "Pair already listed");

        bytes32 listingSalt = keccak256(abi.encodePacked(tokenA, tokenB, listingCount));
        bytes32 liquiditySalt = keccak256(abi.encodePacked(tokenB, tokenA, listingCount));

        listingAddress = address(new MFPListingTemplate{salt: listingSalt}());
        liquidityAddress = address(new MFPLiquidityTemplate{salt: liquiditySalt}());

        MFPListingTemplate(listingAddress).setRouter(routerAddress);
        MFPListingTemplate(listingAddress).setLiquidityAddress(listingCount, liquidityAddress);
        MFPListingTemplate(listingAddress).setTokens(tokenA, tokenB);

        MFPLiquidityTemplate(liquidityAddress).setRouter(routerAddress);
        MFPLiquidityTemplate(liquidityAddress).setListingAddress(listingAddress);
        MFPLiquidityTemplate(liquidityAddress).setTokens(tokenA, tokenB);

        listingValidationByIndex[listingCount] = ListingValidation(
            listingAddress,
            liquidityAddress,
            tokenA,
            tokenB,
            0,
            0,
            0,
            0
        );
        listingValidationByAddress[listingAddress] = listingCount;
        listingIndex[tokenA].push(listingCount);
        listingIndex[tokenB].push(listingCount);
        listedPairs[tokenA][tokenB] = true;
        emit ListingCreated(listingCount, listingAddress, liquidityAddress);
        listingCount++;
    }

    function isValidListing(address listingAddress) external view returns (bool) {
        return listingValidationByAddress[listingAddress] != 0 || listingAddress == listingValidationByIndex[listingValidationByAddress[listingAddress]].listingAddress;
    }

    function getListingId(address listingAddress) external view returns (uint256) {
        require(this.isValidListing(listingAddress), "Invalid listing");
        return listingValidationByAddress[listingAddress];
    }

    function writeValidationSlot(
        uint256 listingId,
        address listingAddress,
        address tokenA,
        address tokenB,
        uint256 xBalance,
        uint256 yBalance,
        uint256 xLiquid,
        uint256 yLiquid
    ) external {
        require(msg.sender == routerAddress, "Router only");
        require(listingValidationByIndex[listingId].listingAddress == listingAddress, "Invalid listing");
        listingValidationByIndex[listingId] = ListingValidation(
            listingAddress,
            listingValidationByIndex[listingId].liquidityAddress,
            tokenA,
            tokenB,
            xBalance,
            yBalance,
            xLiquid,
            yLiquid
        );
    }
}