Theme for Oh My Zsh! Remaster Meritt on Agnoster's Theme new version

meritt2.zsh-theme

# vim:ft=zsh ts=2 sw=2 sts=2
#
# Remaster Meritt on Agnoster's Theme new version — https://github.com/robbyrussell/oh-my-zsh/blob/master/themes/agnoster.zsh-theme
# Old version Merrit - https://gist.github.com/meritt/53dcaf7f8f5ecaa62b2b
# A Powerline-inspired theme for ZSH
##
# # README
#
# In order for this theme to render correctly, you will need a
# [Powerline-patched font](https://github.com/Lokaltog/powerline-fonts).
# Make sure you have a recent version: the code points that Powerline
# uses changed in 2012, and older versions will display incorrectly,
# in confusing ways.
#
# In addition, I recommend the
# [Solarized theme](https://github.com/altercation/solarized/) and, if you're
# using it on Mac OS X, [iTerm 2](https://iterm2.com/) over Terminal.app -
# it has significantly better color fidelity.
#
# If using with "light" variant of the Solarized color schema, set
# SOLARIZED_THEME variable to "light". If you don't specify, we'll assume
# you're using the "dark" variant.
#
# # Goals
#
# The aim of this theme is to only show you *relevant* information. Like most
# prompts, it will only show git information when in a git working directory.
# However, it goes a step further: everything from the current user and
# hostname to whether the last call exited with an error to whether background
# jobs are running in this shell will all be displayed automatically when
# appropriate.

### Segment drawing
# A few utility functions to make it easy and re-usable to draw segmented prompts

CURRENT_BG='NONE'

# Special Powerline characters
() {
  local LC_ALL="" LC_CTYPE="en_US.UTF-8"
  # NOTE: This segment separator character is correct.  In 2012, Powerline changed
  # the code points they use for their special characters. This is the new code point.
  # If this is not working for you, you probably have an old version of the
  # Powerline-patched fonts installed. Download and install the new version.
  # Do not submit PRs to change this unless you have reviewed the Powerline code point
  # history and have new information.
  # This is defined using a Unicode escape sequence so it is unambiguously readable, regardless of
  # what font the user is viewing this source code in. Do not replace the
  # escape sequence with a single literal character.
  # Do not change this! Do not make it '\u2b80'; that is the old, wrong code point.
  SEGMENT_SEPARATOR=$'\ue0b0'
}

RESET="%{$reset_color%}"
SOLAR_YELLOW="$FG[136]"
SOLAR_ORANGE="$FG[166]"
SOLAR_GREEN="$FG[064]"
SOLAR_WHITE="$FG[254]"

ZSH_THEME_NVM_PROMPT_PREFIX="⬡ "
ZSH_THEME_NVM_PROMPT_SUFFIX=""

# Begin a segment
# Takes two arguments, background and foreground. Both can be omitted,
# rendering default background/foreground.
prompt_segment() {
  local bg fg
  [[ -n $1 ]] && bg="%K{$1}" || bg="%k"
  [[ -n $2 ]] && fg="%F{$2}" || fg="%f"
  if [[ $CURRENT_BG != 'NONE' && $1 != $CURRENT_BG ]]; then
    echo -n " %{$bg%F{$CURRENT_BG}%}$SEGMENT_SEPARATOR%{$fg%} "
  else
    echo -n "%{$bg%}%{$fg%} "
  fi
  CURRENT_BG=$1
  [[ -n $3 ]] && echo -n $3
}

# End the prompt, closing any open segments
prompt_end() {
  if [[ -n $CURRENT_BG ]]; then
    echo -n " %{%k%F{$CURRENT_BG}%}$SEGMENT_SEPARATOR"
  else
    echo -n "%{%k%}"
  fi
  echo -n "%{%f%}"
  CURRENT_BG=''
}

### Prompt components
# Each component will draw itself, and hide itself if no information needs to be shown

# Context: user@hostname (who am I and where am I)
prompt_context() {
    local user=`whoami`

  if [[ "$user" != "$DEFAULT_USER" || -n "$SSH_CLIENT" ]]; then
        prompt_segment black default "%(!.%{%F{yellow}%}.)$SOLAR_ORANGE$user$SOLAR_WHITE@$SOLAR_YELLOW%m"
  fi
}

# Git: branch/detached head, dirty status
prompt_git() {
  (( $+commands[git] )) || return
  if [[ "$(git config --get oh-my-zsh.hide-status 2>/dev/null)" = 1 ]]; then
    return
  fi
  local PL_BRANCH_CHAR
  () {
    local LC_ALL="" LC_CTYPE="en_US.UTF-8"
    PL_BRANCH_CHAR=$'\ue0a0'         # 
  }
  local ref dirty mode repo_path

  if $(git rev-parse --is-inside-work-tree >/dev/null 2>&1); then
    repo_path=$(git rev-parse --git-dir 2>/dev/null)
    dirty=$(parse_git_dirty)
    ref=$(git symbolic-ref HEAD 2> /dev/null) || ref="➦ $(git rev-parse --short HEAD 2> /dev/null)"
    if [[ -n $dirty ]]; then
      prompt_segment yellow black
    else
      prompt_segment cyan black
    fi

    if [[ -e "${repo_path}/BISECT_LOG" ]]; then
      mode=" <B>"
    elif [[ -e "${repo_path}/MERGE_HEAD" ]]; then
      mode=" >M<"
    elif [[ -e "${repo_path}/rebase" || -e "${repo_path}/rebase-apply" || -e "${repo_path}/rebase-merge" || -e "${repo_path}/../.dotest" ]]; then
      mode=" >R>"
    fi

    setopt promptsubst
    autoload -Uz vcs_info

    zstyle ':vcs_info:*' enable git
    zstyle ':vcs_info:*' get-revision true
    zstyle ':vcs_info:*' check-for-changes true
    zstyle ':vcs_info:*' stagedstr '✚'
    zstyle ':vcs_info:*' unstagedstr '●'
    zstyle ':vcs_info:*' formats ' %u%c'
    zstyle ':vcs_info:*' actionformats ' %u%c'
    vcs_info
    echo -n "${ref/refs\/heads\//$PL_BRANCH_CHAR }${vcs_info_msg_0_%% }${mode}"
  fi
}

prompt_bzr() {
    (( $+commands[bzr] )) || return
    if (bzr status >/dev/null 2>&1); then
        status_mod=`bzr status | head -n1 | grep "modified" | wc -m`
        status_all=`bzr status | head -n1 | wc -m`
        revision=`bzr log | head -n2 | tail -n1 | sed 's/^revno: //'`
        if [[ $status_mod -gt 0 ]] ; then
            prompt_segment yellow black
            echo -n "bzr@"$revision "✚ "
        else
            if [[ $status_all -gt 0 ]] ; then
                prompt_segment yellow black
                echo -n "bzr@"$revision
            else
                prompt_segment cyan black
                echo -n "bzr@"$revision
            fi
        fi
    fi
}

prompt_hg() {
  (( $+commands[hg] )) || return
  local rev st branch
  if $(hg id >/dev/null 2>&1); then
    if $(hg prompt >/dev/null 2>&1); then
      if [[ $(hg prompt "{status|unknown}") = "?" ]]; then
        # if files are not added
        prompt_segment red white
        st='±'
      elif [[ -n $(hg prompt "{status|modified}") ]]; then
        # if any modification
        prompt_segment yellow black
        st='±'
      else
        # if working copy is clean
        prompt_segment cyan $CURRENT_FG
      fi
      echo -n $(hg prompt "☿ {rev}@{branch}") $st
    else
      st=""
      rev=$(hg id -n 2>/dev/null | sed 's/[^-0-9]//g')
      branch=$(hg id -b 2>/dev/null)
      if `hg st | grep -q "^\?"`; then
        prompt_segment red black
        st='±'
      elif `hg st | grep -q "^[MA]"`; then
        prompt_segment yellow black
        st='±'
      else
        prompt_segment cyan $CURRENT_FG
      fi
      echo -n "☿ $rev@$branch" $st
    fi
  fi
}

# Dir: current working directory
prompt_dir() {
  prompt_segment blue black '%~'
}

# Virtualenv: current working virtualenv
prompt_virtualenv() {
  local virtualenv_path="$VIRTUAL_ENV"
  if [[ -n $virtualenv_path && -n $VIRTUAL_ENV_DISABLE_PROMPT ]]; then
    prompt_segment blue black "(`basename $virtualenv_path`)"
  fi
}

# Status:
# - was there an error
# - am I root
# - are there background jobs?
prompt_status() {
  local -a symbols

  [[ $RETVAL -ne 0 ]] && symbols+="%{%F{red}%}✘"
  [[ $UID -eq 0 ]] && symbols+="%{%F{yellow}%}⚡"
  [[ $(jobs -l | wc -l) -gt 0 ]] && symbols+="%{%F{cyan}%}⚙"

  [[ -n "$symbols" ]] && prompt_segment black default "$symbols"
}

#AWS Profile:
# - display current AWS_PROFILE name
# - displays yellow on red if profile name contains 'production' or
#   ends in '-prod'
# - displays black on green otherwise
prompt_aws() {
  [[ -z "$AWS_PROFILE" ]] && return
  case "$AWS_PROFILE" in
    *-prod|*production*) prompt_segment red yellow  "AWS: $AWS_PROFILE" ;;
    *) prompt_segment cyan black "AWS: $AWS_PROFILE" ;;
  esac
}

## Main prompt
build_prompt() {
  RETVAL=$?
  prompt_status
  prompt_virtualenv
  prompt_aws
  prompt_context
  prompt_dir
  prompt_git
  prompt_bzr
  prompt_hg
  prompt_end
}

PROMPT='%{%f%b%k%}$(build_prompt) '
RPROMPT='$SOLAR_GREEN$(nvm_prompt_info)$RESET'

1. Install zsh
2. Install Oh my Zsh
3. Install nvm
4. Copy the theme to directory

   $ curl https://gist.githubusercontent.com/H6LS1S/300fd76aac668db89d6952c454b4fba4/raw/d2126374757168161c1e083d3db7bf009dcb7f94/meritt2.zsh-theme -o ~/.oh-my-zsh/themes/meritt2.zsh-theme

5. Change the name of the theme in the ~/.zshrc file to meritt2
6. Refresh terminal

# If you come from bash you might have to change your $PATH.
# export PATH=$HOME/bin:/usr/local/bin:$PATH

# Path to your oh-my-zsh installation.
export ZSH="/home/$USER/.oh-my-zsh"

# Set name of the theme to load --- if set to "random", it will
# load a random theme each time oh-my-zsh is loaded, in which case,
# to know which specific one was loaded, run: echo $RANDOM_THEME
# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
ZSH_THEME="meritt2"

# Set list of themes to pick from when loading at random
# Setting this variable when ZSH_THEME=random will cause zsh to load
# a theme from this variable instead of looking in ~/.oh-my-zsh/themes/
# If set to an empty array, this variable will have no effect.
# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )

# Uncomment the following line to use case-sensitive completion.
# CASE_SENSITIVE="true"

# Uncomment the following line to use hyphen-insensitive completion.
# Case-sensitive completion must be off. _ and - will be interchangeable.
# HYPHEN_INSENSITIVE="true"

# Uncomment the following line to disable bi-weekly auto-update checks.
# DISABLE_AUTO_UPDATE="true"

# Uncomment the following line to automatically update without prompting.
# DISABLE_UPDATE_PROMPT="true"

# Uncomment the following line to change how often to auto-update (in days).
# export UPDATE_ZSH_DAYS=13

# Uncomment the following line if pasting URLs and other text is messed up.
# DISABLE_MAGIC_FUNCTIONS=true

# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"

# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"

# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"

# Uncomment the following line to display red dots whilst waiting for completion.
# COMPLETION_WAITING_DOTS="true"

# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"

# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output.
# You can set one of the optional three formats:
# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
# or set a custom format using the strftime function format specifications,
# see 'man strftime' for details.
# HIST_STAMPS="mm/dd/yyyy"

# Would you like to use another custom folder than $ZSH/custom?
# ZSH_CUSTOM=/path/to/new-custom-folder

# Which plugins would you like to load?
# Standard plugins can be found in ~/.oh-my-zsh/plugins/*
# Custom plugins may be added to ~/.oh-my-zsh/custom/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(zsh-syntax-highlighting git node npm docker kubectl docker-compose)

source $ZSH/oh-my-zsh.sh

# User configuration

# export MANPATH="/usr/local/man:$MANPATH"

# You may need to manually set your language environment
# export LANG=en_US.UTF-8

# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
#   export EDITOR='vim'
# else
#   export EDITOR='mvim'
# fi

# Compilation flags
# export ARCHFLAGS="-arch x86_64"

# Set personal aliases, overriding those provided by oh-my-zsh libs,
# plugins, and themes. Aliases can be placed here, though oh-my-zsh
# users are encouraged to define aliases within the ZSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias zshconfig="mate ~/.zshrc"
# alias ohmyzsh="mate ~/.oh-my-zsh"

export NVM_DIR="$([ -z "${XDG_CONFIG_HOME-}" ] && printf %s "${HOME}/.nvm" || printf %s "${XDG_CONFIG_HOME}/nvm")"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm