Skip to content

Instantly share code, notes, and snippets.

@HackingGate

HackingGate/image-build.sh

Last active March 14, 2024 08:56
Show Gist options
  • Save HackingGate/b75ac856397075756ea878380c5b848c to your computer and use it in GitHub Desktop.
Save HackingGate/b75ac856397075756ea878380c5b848c to your computer and use it in GitHub Desktop.
Download ZIP
upgrade ipk on OpenWrt
Raw
image-build.sh
VERSION=19.07.7
# Download imagebuilder for R7800.
aria2c -c -x4 -s4 https://downloads.openwrt.org/releases/${VERSION}/targets/ipq806x/generic/openwrt-imagebuilder-${VERSION}-ipq806x-generic.Linux-x86_64.tar.xz
# Extract & remove used file & cd to the directory
tar -xvf openwrt-imagebuilder-${VERSION}-ipq806x-generic.Linux-x86_64.tar.xz
rm openwrt-imagebuilder-${VERSION}-ipq806x-generic.Linux-x86_64.tar.xz
cd openwrt-imagebuilder-${VERSION}-ipq806x-generic.Linux-x86_64/
# Use https when making image
sed -i 's/http:/https:/g' repositories.conf
# Make all kernel modules built-in
sed -i -e "s/=m/=y/g" build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/linux-ipq806x_generic/linux-*/.config
# Run the final build configuration
make image PROFILE=netgear_r7800 \
PACKAGES="ca-bundle ca-certificates libustream-openssl -ppp -ppp-mod-pppoe \
uhttpd uhttpd-mod-ubus libiwinfo-lua luci-base luci-app-firewall luci-mod-admin-full luci-theme-bootstrap \
-wpad-mini -wpad-basic wpad-openssl usbutils block-mount e2fsprogs samba4-server luci-app-samba4 \
aria2 luci-app-aria2 ariang stubby curl wget tcpdump kmod-fs-ext4 kmod-usb-storage kmod-usb-storage-uas"
# list result
ls $PWD/bin/targets/ipq806x/generic
Raw
install-script.sh
# To use opkg via https
opkg update
opkg install ca-bundle ca-certificates libustream-openssl curl wget
sed -i 's/http:/https:/g' /etc/opkg/distfeeds.conf
# DoH with Dnsmasq and https-dns-proxy
# https://openwrt.org/docs/guide-user/services/dns/doh_dnsmasq_https-dns-proxy
opkg install https-dns-proxy luci-app-https-dns-proxy
# pkg-upgrade.sh
wget https://gist.github.com/HackingGate/b75ac856397075756ea878380c5b848c/raw/db404b6028b9136b47192ce90f3520e97a3faa3e/pkg-upgrade.sh
chmod +x pkg-upgrade.sh
./pkg-upgrade.sh
# sys-upgrade.sh
wget https://gist.github.com/HackingGate/b75ac856397075756ea878380c5b848c/raw/725c991f7286400e4f0d6ae5f993f8dd17caca90/sys-upgrade.sh
chmod +x sys-upgrade.sh
./sys-upgrade.sh
# Capturing packets
opkg install tcpdump
# Deploy WPA3 Wi-Fi
opkg remove wpad-mini wpad-basic
opkg install wpad-openssl
/etc/init.d/network restart
# Using storage devices
opkg update
opkg install kmod-usb-storage
opkg install kmod-usb-storage-uas
opkg install usbutils
lsusb -t
opkg install block-mount
block info | grep "/dev/sd"
lsusb -t
opkg install e2fsprogs
opkg install kmod-fs-ext4
block detect | uci import fstab
uci set fstab.@mount[-1].enabled='1'
uci set fstab.@global[0].check_fs='1'
uci commit fstab
uci show fstab
service fstab boot
# SMB Samba4
opkg install samba4-server
opkg install luci-app-samba4
# Aira2 and ariang
opkg install aria2
opkg install luci-app-aria2
opkg install ariang
Raw
pkg-upgrade.sh
#!/bin/sh
set -e
# Force HTTPS
sed -i 's/http:/https:/g' /etc/opkg/distfeeds.conf
# Update packages
opkg update
for ipk in $(opkg list-upgradable | awk '$1!~/^base-files|^kmod|^Multiple/{print $1}'); do
opkg upgrade $ipk
done
# Download bt trackers
TRACKERS=`curl -s https://raw.githubusercontent.com/ngosang/trackerslist/master/trackers_best.txt \
| tr '\n' ' ' \
| sed 's/ *$//'`
echo "Updating /etc/config/aria2 bt_tracker"
# Delete config
sed -i "/list bt_tracker/d" /etc/config/aria2
# Append config
echo -e "\tlist bt_tracker '$TRACKERS'" | tee -a /etc/config/aria2
# Download netboot.xyz
wget https://boot.netboot.xyz/ipxe/netboot.xyz.efi -O /root/tftp/netboot.xyz.efi
Raw
sys-upgrade.sh
#!/bin/sh
set -e
OPENWRT_TAG=`git ls-remote git://github.com/openwrt/openwrt.git | grep -E -o 'v[0-9]+\.[0-9]+\.[0-9]+' | tail -1`
OPENWRT_VERSION=`echo ${OPENWRT_TAG} | grep -E -o '[0-9]+\.[0-9]+\.[0-9]+'`
rm -f *.manifest manifest.diff
# Use sed remove vlmcsd
opkg list-installed | sed '/vlmcsd/d' | tee list-installed.manifest
wget https://downloads.hackinggate.com/openwrt-${OPENWRT_VERSION}-ipq806x-generic-netgear-r7800/openwrt-${OPENWRT_VERSION}-ipq806x-generic-device-netgear-r7800.manifest
diff openwrt-${OPENWRT_VERSION}-ipq806x-generic-device-netgear-r7800.manifest list-installed.manifest | tee manifest.diff
FILE1_LINES=`cat manifest.diff | grep '<' | wc -l`
FILE2_LINES=`cat manifest.diff | grep '>' | wc -l`
# n1 -ge n2 True if the integer n1 is algebraically greater than or equal to the integer n2.
# n1 -gt n2 True if the integer n1 is algebraically greater than the integer n2.
if [ ${FILE1_LINES} -ge 0 ] && [ ${FILE1_LINES} -eq ${FILE2_LINES} ]
then
echo "Upgrading to ${OPENWRT_TAG}"
rm -f openwrt-${OPENWRT_TAG}-ipq806x-generic-netgear_r7800-squashfs-sysupgrade.bin
wget https://downloads.hackinggate.com/openwrt-${OPENWRT_VERSION}-ipq806x-generic-netgear-r7800/openwrt-${OPENWRT_VERSION}-ipq806x-generic-netgear_r7800-squashfs-sysupgrade.bin
# -o attempt to preserve all changed files in /, except those
# from packages but including changed confs.
sysupgrade -o openwrt-${OPENWRT_VERSION}-ipq806x-generic-netgear_r7800-squashfs-sysupgrade.bin
fi
@HackingGate
Copy link
Author

HackingGate commented Apr 8, 2021 •
edited
Loading

Setup WireGuard server

WireGuard server

Last modified: 2021/04/04 14:23 by vgaetera

The document is missing LuCI app, client psk, key and pub. The fixed command here:

  1. Preparation
# Install packages
opkg update
opkg install luci-proto-wireguard

# Configuration parameters
WG_IF="vpn"
WG_PORT="51820"
WG_ADDR="192.168.9.1/24"
WG_ADDR6="fdf1:e8a1:8d3f:9::1/64"
  1. Key management
# Generate keys
umask go=
wg genkey | tee wgserver.key | wg pubkey > wgserver.pub
wg genpsk > wgclient.psk
wg genkey | tee wgclient.key | wg pubkey > wgclient.pub

# Server private key
WG_KEY="$(cat wgserver.key)"

# Pre-shared key
WG_PSK="$(cat wgclient.psk)"

# Client public key
WG_PUB="$(cat wgclient.pub)"

Follow the rest of the document.

Setup WireGuard client

This will allow you access home resources from anywhere in the world.

I don't have public IPv4 address. I have public IPv6 addresses from HE.net. So my Endpoint is IPv6 only.

Replace wgclient.key, wgserver.pub, wgclient.psk, OpenWrt_LAN_Interface_Private_IPv6_Subnet, OpenWrt_Public_IPv6_Address with actual value.
DNS is optional.

[Interface]
PrivateKey = wgclient.key
Address = 192.168.9.2/32, fdf1:e8a1:8d3f:9::2/128
DNS = 192.168.9.1, fdf1:e8a1:8d3f:9::1

[Peer]
PublicKey = wgserver.pub
PresharedKey = wgclient.psk
AllowedIPs = 192.168.0.0/16, fdf1:e8a1:8d3f:9::/64, OpenWrt_LAN_Interface_Private_IPv6_Subnet
Endpoint = [OpenWrt_Public_IPv6_Address]:51820

Restart WireGuard server

/etc/init.d/network restart

Route all connections to VPN

(client side settings only)

You can change AllowedIPs to 0.0.0.0/0, ::/0. It will route all IP connection (OSI layer 3) (except some private addresses like default gateway) to WireGuard VPN.

To show routing table on macOS:

netstat -rn

192.168.1.1 is the default gateway and it goes through en0 which is the default Wi-Fi interface on macOS.

http://192.168.1.1 will be my friend's home router's authentication page.

Route 192.168.1.1 to WireGuard VPN. (utun2 is my WireGuard's interface, run ifconfig to see yours.)

sudo route change 192.168.1.1 -interface utun2

http://192.168.1.1 will be my router so I can maintenance my home network remotely.

And Internet will down.
To reset it turn off/on Wi-Fi and re-enable WireGuard.

@HackingGate
Copy link
Author

R7800 Debricking

[OpenWrt Wiki] Netgear R7800 (Nighthawk X4S AC2600) Debricking

On macOS the tftp command is a little different.

References

# Enable TFTP server
sudo launchctl unload -w /System/Library/LaunchDaemons/tftp.plist
# Check if TFTP server running
sudo lsof -i:69

More about launchctl: https://apple.stackexchange.com/a/308421/105981

Commands

$ tftp
tftp> connect 192.168.1.1
tftp> mode binary
tftp> put openwrt-21.02.0-rc3-ipq806x-generic-netgear_r7800-squashfs-factory.img

@HackingGate
Copy link
Author

DoH with Dnsmasq and https-dns-proxy

https://openwrt.org/docs/guide-user/services/dns/doh_dnsmasq_https-dns-proxy

opkg install https-dns-proxy luci-app-https-dns-proxy

@HackingGate
Copy link
Author

HackingGate commented Jul 7, 2021 •
edited
Loading

PS4 Remote Play

Common Ways To Remote Play While Away Home

  1. The official PS Remote Play app away home play feature
    I'm currently using v6プラス(based on MAP-E) option from my ISP. I have public IPv4/v6 addresses but I have only SOME IPv4 ports available. I failed to connect my PS4.

  2. The official PS Remote Play app in-home play feature with a home VPN server
    This method works on OSI-layer 2 VPN but not on layer 3.
    WireGuard is layer 3. And I have no plan to start a OpenVPN TAP mode (layer 2) VPN.

The solution (the third way to remote play)

Prepare a layer 3 home VPN server.

Use Chiaki instead of official PS Remote Play. (I learned here)

Seems Chiaki don't wake PS4 on LAN. So I installed ps4-waker on my home Raspberry Pi.

Just follow the link and setup it.

The result

  1. Set PS4 to Rest Mode before leave home. (Don't Power Off)
  2. SSH into home Raspberry Pi.
  3. Run ps4-waker command will wake up PS4.
  4. Connect to home VPN (layer 3).
  5. Open Chiaki any enjoy it.

@HackingGate
Copy link
Author

HackingGate commented Aug 4, 2021 •
edited
Loading

Block Country IPs

Tutorial for how to boycott CN IPv4 on OpenWrt.
Script from here https://github.com/kravietz/blacklist-scripts
CIDR IP list from my project https://country-ip-blocks.hackinggate.com

OpenWrt Setup

Install

opkg install ipset curl
wget https://raw.githubusercontent.com/kravietz/blacklist-scripts/master/blacklist.sh
mv blacklist.sh /etc/firewall.user

Create /etc/ip-blacklist.conf

URLS="https://country-ip-blocks.hackinggate.com/CN_IPv4.txt"

Edit /etc/firewall.user

I don't have pppoe-wan and the blocklist don't work.
I replaced IN_OPT="-i $wan_iface" with IN_OPT="" and it works now. (kravietz/blacklist-scripts#6)

Activate

# Manual run
sh /etc/firewall.user
# Daily update
echo "01 01 * * * sh /etc/firewall.user" >>/etc/crontabs/root

Check & Test

ipset list -name

Two new sets are added

manual-blacklist
country-ip-blocks.hac

View blocked CN IPv4 entries

ipset list country-ip-blocks.hac

Here's how to use manual-blacklist.

ipset add manual-blacklist 8.8.8.8
ipset list manual-blacklist
ping 8.8.8.8
ipset del manual-blacklist 8.8.8.8
ping 8.8.8.8

Block Multi Lists

Example of /etc/ip-blacklist.conf

# Emerging Threats lists offensive IPs such as botnet command servers
URLS="https://rules.emergingthreats.net/fwrules/emerging-Block-IPs.txt"

# Blocklist.de collects reports from fail2ban probes, listing password brute-forces, scanners and other offenders
URLS="$URLS https://www.blocklist.de/downloads/export-ips_all.txt"

URLS="$URLS https://country-ip-blocks.hackinggate.com/CN_IPv4.txt"
URLS="$URLS https://country-ip-blocks.hackinggate.com/HK_IPv4.txt"
URLS="$URLS https://country-ip-blocks.hackinggate.com/MO_IPv4.txt"

All set will name country-ip-blocks.hac and override.

To fix it. Edit /etc/firewall.user. Insert script between the two lines. L116

# download the blocklist                                                                                            
set_name=$(echo "$url" | awk -F/ '{print substr($3,0,21);}') # set name is derived from source URL hostname         
curl -L -v -s ${COMPRESS_OPT} -k "$url" >"${unsorted_blocklist}" 2>"${headers}"

Will be

# download the blocklist                                                                                            
set_name=$(echo "$url" | awk -F/ '{print substr($3,0,21);}') # set name is derived from source URL hostname         
# autodetect country-ip-blocks.hackinggate.com                                                                      
if echo "${url}" | grep -q 'country-ip-blocks.hackinggate.com'; then                                                
    set_name=$(echo "$url" | awk -F/ '{print substr($4,0,21);}')                                                    
fi                                                                                                                  
curl -L -v -s ${COMPRESS_OPT} -k "$url" >"${unsorted_blocklist}" 2>"${headers}"

sh /etc/firewall.user and ipset list -name will be

manual-blacklist
rules.emergingthreats
www.blocklist.de
CN_IPv4.txt
HK_IPv4.txt
MO_IPv4.txt

Check if there's entries

ipset list CN_IPv4.txt | wc -l

@HackingGate
Copy link
Author

HackingGate commented Oct 3, 2021 •
edited
Loading

netboot.xyz

https://netboot.xyz

cd /root
mkdir tftp
cd tftp
wget https://boot.netboot.xyz/ipxe/netboot.xyz.efi

Edit /etc/config/dhcp

config dnsmasq
        ...
        option enable_tftp '1'
        option dhcp_boot 'netboot.xyz.efi'
        option tftp_root '/root/tftp'

config dhcp 'lan'
	...
	list dhcp_option '66,0.0.0.0'

/etc/init.d/dnsmasq restart

@HackingGate
Copy link
Author

Upgrade OpenWrt

auc

@HackingGate
Copy link
Author

HackingGate commented Sep 9, 2022 •
edited
Loading

Advertise DNS server

/etc/config/dhcp

config dhcp 'lan'
	...
	list dhcp_option '6,192.168.4.45'

@HackingGate
Copy link
Author

Exroot

https://openwrt.org/docs/guide-user/additional-software/extroot_configuration

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment