HardenedArray · August 19, 2024 11:34 · HardenedArray · Aug 9, 2020 · hertg · Aug 9, 2020
diff --git a/Efficient UEFI Encrypted Root and Swap Arch Linux Installation Procedure with an ENCRYPTED BOOT b/Efficient UEFI Encrypted Root and Swap Arch Linux Installation Procedure with an ENCRYPTED BOOT


 # OBJECTIVE:  Install Arch Linux with encrypted root and swap filesystems with an ENCRYPTED BOOT and boot from UEFI.  We will
 also decrypt and mount our entire encrypted system using a single LUKS passphrase entry.

 # Note:  This method supports both dedicated Arch installs and those who wish to install Arch on a multi-OS-UEFI booting system.

 # External USB HDD/SSD Installers Notes:  Encrypted Arch installs can be booted and run from an external USB HDD or SSD, but
 # only when the installation is correctly set up.  There are several necessary changes to my standard procedure you'll want
 # to make during the install process.  Read my External USB HDD/SSD Installation section below before proceeding.

 # VirtualBox Installers Notes:  This installation method can also be used to install Arch Linux as an UEFI-booting 
 # Guest system in VirtualBox.  You must have UEFI-booting enabled in VBox's Guest System Settings prior to installation.
 # I have written a separate guide dedicated to the specifics of achieving an encrypted Arch Linux VirtualBox installation.
 # My Arch Linux VirtualBox Guest installation guide is available at:

 https://gist.github.com/HardenedArray/d5b70681eca1d4e7cfb88df32cc4c7e6

 # The official Arch installation guide contains details that you should refer to during this installation process.
 # That guide resides at:  https://wiki.archlinux.org/index.php/Installation_Guide

 # Download the archlinux-*.iso image from https://www.archlinux.org/download/ and its GnuPG signature.
 # Use gpg --verify to ensure your archlinux-*.iso is exactly what the Arch developers intended.  For example:

 $ gpg -v archlinux-2019.11.01-x86_64.iso.sig
 gpg: WARNING: no command supplied.  Trying to guess what you mean ...
 gpg: assuming signed data in 'archlinux-2019.11.01-x86_64.iso'
 gpg: Signature made Fri Nov  1 16:34:35 2019 UTC
 gpg:                using RSA key 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
 gpg: using pgp trust model
 gpg: Good signature from "Pierre Schmitz <[email protected]>" [unknown]
 gpg: WARNING: This key is not certified with a trusted signature!
 gpg:          There is no indication that the signature belongs to the owner.
 Primary key fingerprint: 4AA4 767B BC9C 4B1D 18AE  28B7 7F2D 434B 9741 E8AC
 gpg: binary signature, digest algorithm SHA256, key algorithm rsa2048

 # Burn the archlinux-*.iso  to a 1+ Gb USB stick.  On linux, do something like:

 dd bs=4M if=archlinux-*.iso of=/dev/sdX status=progress oflag=sync

 # If running Windows, use Rufus to burn the archlinux-*.iso to your USB stick in DD mode.
 # Also, if you are running BitLocker to encrypt your Windows system, read my BitLocker notes below, before proceeding.

 # UEFI-Boot from your USB stick. If your USB stick fails to boot, ensure that Secure Boot is disabled in your UEFI configuration.

 # Set your keymap only if not you are not using the default English language.

 # It is typically wiser to be hard wired to the Net during installation. However, Arch supports WiFi-only installs.  Also 
 # note that in mid-2020 the Arch devs deprecrated the use of `wifi-menu`.  The current installation images support `iwd`, 
 # which provides `iwctl`.  Carefully note that `iwd` will NOT be installed on your new system.  If you will require WiFi
 # access following reboot, we install `iwd` in the pacstrap command and then enable it after we enter arch-chroot, below.

 # Connect to WiFi using:

 iwctl

 # then to connect to your WiFi station; do something like:

 station <wlan device name> connect <wifi-station-name tab-auto-complete>

 # then enter your WiFi station's passphrase

 # It is possible to access this guide from within your Arch installation environment using the built-in elinks text browser.  
 # For those interested, open a new terminal at tty2 using ctrl-alt-f2, then use elinks to search for 'HardenedArray Gists' 
 # which should return the URL of my Arch installation guide:

 https://gist.github.com/HardenedArray/31915e3d73a4ae45adc0efa9ba458b07

 # You can then return to your installation terminal using ctrl-alt-f1.

 # Create and size partitions appropriate to your goals using gdisk.

 # To support booting from an encrypted /boot, we need to set up our partitions differently and use a different LUKS encryption
 # method than in my other guides.

 # Create only the partitions you need.  If you have an existing EFI partition, do NOT create a new one.  We will mount that
 # existing EFI partition and append our new Arch installation to it.

 gdisk /dev/sdX

 # Also note, we are intentionally NOT creating a separate /boot partition.  Our separately encrypted /boot will reside
 # as a directory under our encrypted root / filesystem.  We need ONLY two partitions!

 Partition Y = 100 MiB EFI partition # Hex code EF00
 Partition Z = Choose a reasonable size for your encrypted root and swap system partition, or just size it to the 
 last sector of your drive. # Hex code 8300.  

 # Review your partitions with 'p'.
 # Write your gdisk changes with 'w'.  
 # Reboot, if necessary, so the kernel reads your new partition structure.
 ,
 # I strongly recommend you zero-out each of of your new partitions prior to creating filesystems on them.  Obviously, multi-OS
 # booters should NEVER zero-out an existing EFI partition.  You can either use the Arch installer's ddrescue or, if you don't
 # mind not having a progress indicator, it's more efficient to run:

 cat /dev/zero > /dev/sdXY followed by
 cat /dev/zero > /dev/sdXZ

 # Create a filesystem for /efi.  This step applies to NEW EFI installations ONLY!

 mkfs.vfat -F 32 /dev/sdXY  

 # Encrypt and open your system partition

 cryptsetup -c aes-xts-plain64 -h sha512 -s 512 --use-random --type luks1 luksFormat /dev/sdXZ

 # Note our use of the critical '--type luks1' encryption switch.  The default Type 2 LUKS encryption PREVENTS Grub from
 # being able to properly decrypt an encrypted /boot.  This is also precisely why an existing encrypted Arch system which used
 # standard LUKS Type 2 encryption CANNOT be converted into an encrypted /boot system.  A clean install is necessary!

 # Also note that Grub is slated to support unlocking a LUKS2 encrypted /boot in the future.  That LUKS2 support is currently
 # targeted at the Grub 2.06 (or later) release, but that support is NOT currently available in Grub.

 cryptsetup luksOpen /dev/sdXZ RockinEncryptedBoot # (or use any word or phrase you're fond of)

 # Create encrypted LVM partitions

 # These steps create a required root partition and an optional partition for swap.  Note that using a swap file with BTRFS has 
 # become possible since kernel 5+.  As always, swap partitions are not controlled by BTRFS so they work fine.  Read the 
 # BTRFS ArchWiki before proceeding.

 # Also note that BTRFS fully supports, detects, and properly configures settings for all modern SSDs, which is the drive type
 # almost everyone should be running when installing ArchLinux!  HDDs are only useful for infrequently accessed data, and 
 # for storing your SSD's critical directories as encrypted backups.

 # Modify this structure only if you need additional, separate partitions.  The sizes used below are only suggestions.
 # The VG and LV labels 'Arch, root and swap' can be changed to anything memorable to you.  Use your labels consistently, below!

 pvcreate /dev/mapper/RockinEncryptedBoot
 vgcreate Arch /dev/mapper/RockinEncryptedBoot
 lvcreate -L 512M Arch -n swap
 lvcreate -l 100%FREE Arch -n root

 # Create filesystems on your encrypted partitions

 mkswap /dev/mapper/Arch-swap
 mkfs.ext4 /dev/mapper/Arch-root  

 # Note that Arch Linux fully supports btrfs, and btrfs is also an excellent filesystem choice for your encrypted root.  
 # If you want a btrfs filesystem on your root logical volume, instead of 'mkfs.ext4 /dev/mapper/Arch-root', do this:

 mkfs.btrfs /dev/mapper/Arch-root

 # If you've created a btrfs root filesystem, do not forget to append 'btrfs-progs' to the pacstrap installation command
 # we use immediately after correctly mounting our partitions below.

 # Mount the new system 

 mount /dev/mapper/Arch-root /mnt
 swapon /dev/mapper/Arch-swap
 mkdir /mnt/boot
 mkdir /mnt/efi
 mount /dev/sdXY /mnt/efi

 # Optional - Edit the Mirrorlist To Optimize Package Download Speeds

 nano /etc/pacman.d/mirrorlist

 # Copy one or two mirrors near your physical location to the top of the mirrorlist.

 # Install your Arch system

 # If you read the contents of https://www.archlinux.org/ you would know the Arch developers made significant
 # changes to the 'base' package in October 2019.

 # The new base-metapackage does not contain a kernel nor an editor and several other important packages.  
 # We will be addressing those issues in our pacstrap command below.

 # This installation command provides a decent set of basic system programs which will also support WiFi through 
 # iwd's `iwctl` after initially booting into your Arch system.  Having WiFi following installation is particularly
 # critical for anyone running a modern ultrabook, as most are equipped with WiFi-only access to the Net.  Recommended, yet 
 # optional:  make and enjoy some fresh java while the following command completes.  Once completed, you'll only 
 # be a few minutes away from putting your new system to serious work!

 pacstrap /mnt base base-devel grub efibootmgr dialog wpa_supplicant linux linux-headers nano 
 dhcpcd iwd lvm2 linux-firmware man-pages

 # Create and review FSTAB

 genfstab -U /mnt >> /mnt/etc/fstab  # The -U option pulls in all the correct UUIDs for your mounted filesystems.
 cat /mnt/etc/fstab  # Check your fstab carefully, and modify it, if required.

 # Enter the new system

 arch-chroot /mnt /bin/bash

 # Set the system clock

 ln -s /usr/share/zoneinfo/UTC /etc/localtime  # This will harmlessly fail if your system's CMOS clock is already set to UTC.
 hwclock --systohc --utc

 # If you require WiFi access following reboot, enable iwd:

 systemctl enable iwd

 # Assign your hostname

 echo MyHostName > /etc/hostname

 # Set or update your locale

 # If English is your native language, you need to edit exactly two lines to correctly configure your locale language settings:

 a. In /etc/locale.gen **uncomment only**: en_US.UTF-8 UTF-8
 b. In /etc/locale.conf, you should **only** have this line: LANG=en_US.UTF-8

 # Now run:

 locale-gen

 # Set your root password

 passwd

 # Create a User, assign appropriate Group membership, and set a User password.  'Wheel' is just one important Group.

 useradd -m -G wheel -s /bin/bash MyUserName

 passwd MyUserName 

 # Let's create our crypto keyfile:

 cd /
 dd bs=512 count=4 if=/dev/random of=crypto_keyfile.bin iflag=fullblock
 chmod 000 /crypto_keyfile.bin
 chmod 600 /boot/initramfs-linux*
 cryptsetup luksAddKey /dev/sdXZ /crypto_keyfile.bin
 cryptsetup luksDump /dev/sdXZ  # You should now see that LUKS Key Slots 0 and 1 are both occupied

 # Configure mkinitcpio with the correct FILES statement and proper HOOKS required for your initrd image:

 nano /etc/mkinitcpio.conf

 # Your FILES statement needs to match mine:

 FILES=(/crypto_keyfile.bin)

 # Use this HOOKS statement:

 HOOKS="base udev autodetect modconf block keymap encrypt lvm2 resume filesystems keyboard fsck"

 # Note that recent ArchLinux installation images have shipped with a new version of /etc/mkinitcpio.conf.  The 
 # only difference is that the new version uses '(' and ')' instead of dual double quotation marks: ' " " '.  Therefore,
 # the current HOOKS statement should be:

 HOOKS=(base udev autodetect modconf block keymap encrypt lvm2 resume filesystems keyboard fsck)

 # You do not need or want 'resume' in your HOOKS statement if you are not using swap.

 # Generate your initrd image

 mkinitcpio -p linux

 # Install and Configure Grub-EFI

 # Since we need grub to decrypt our encrypted /boot, we first need to configure grub so that it knows we are working with
 # a LUKS encrypted disk.

 nano /etc/default/grub

 # UNCOMMENT this line:

 GRUB_ENABLE_CRYPTODISK=y

 # The correct way to install grub on an UEFI computer, irrespective of your use of a HDD or SSD, and whether you are
 # installing dedicated Arch, or multi-OS booting, for our encrypted /boot purposes is:

 grub-install --target=x86_64-efi --efi-directory=/efi --bootloader-id=ArchLinux

 # Edit /etc/default/grub so it includes a statement like this:

 GRUB_CMDLINE_LINUX="cryptdevice=/dev/sdYZ:MyDevMapperMountpoint resume=/dev/mapper/MyVolGroupName-MyLVSwapName"

 # Maintaining consistency with the examples provided above, you would use something like:

 GRUB_CMDLINE_LINUX="cryptdevice=/dev/sdXZ:RockinEncryptedBoot resume=/dev/mapper/Arch-swap"

 # If you are not using swap, eliminate the 'resume' statement above.

 # Generate Your Final Grub Configuration:

 grub-mkconfig -o /boot/grub/grub.cfg

 # Exit Your New Arch System

 exit

 # Unmount all partitions

 umount -R /mnt
 swapoff -a

 # Reboot and Enjoy Your Encrypted BOOT Arch Linux System!

 reboot

 # Upon reboot, you should be greeted with a Grub screen asking you to enter your LUKS encryption passphrase.  
 # Note, because of the way I have structured this installation you will always only need to enter your passphrase ONCE!!
 # This passphrase entry allows Grub to decrypt /boot, then Grub will automatically decrypt our encrypted root and swap!

 # If you need non-US keyboard passphrase entry support, note that the early-boot passphrase entry will always use  
 # US keyboard mapping, even if you changed the keymap for your GRUB bootloader.  Refer to:

 https://wiki.archlinux.org/index.php/GRUB/Tips_and_tricks#Manual_configuration_of_core_image_for_early_boot

 # for additional information.
 __________________________ 

 # After you are satisfied that your Arch system is running well, if you are like most people not running an Arch server, 
 # you'll want a Desktop Environment so you can begin using your new system productively.  See my:  'Installing a 
 # Plasma-KDE Desktop Post Arch Install' section below for some ideas and an efficient DE installation process.

 __________________________ 


 If you ever get dropped to the EFI Shell prompt when powering up Arch Linux, which I most often notice within 
 VirtualBox when running Arch Linux as an UEFI-enabled Guest System, do the following:

 At the Shell prompt, type the following entries, as indicated (also remember we used --bootloader-id=ArchLinux, above):

 Shell> fs0:
 fs0:> \EFI\ArchLinux\grubx64.efi

 Hit Enter and now you should see your graphical grub Arch Linux menu.  Note my atypical use of backslashes.

 To prevent being dropped to the EFI Shell prompt in the future, enter your Arch Linux system, become root, and do:

 # nano /boot/efi/startup.nsh

 In your startup.nsh file, add these two lines:

 fs0:
 \EFI\ArchLinux\grubx64.efi  

 Save and exit nano.  To test that you will no longer be dropped to the EFI Shell prompt, poweroff, not reboot, and fire up 
 your Arch Linux system again.

 If you simply cannot bear the agony of the EFI Shell's five second wait prior to its loading of startup.nsh, hit any key, 
 except for 'esc', and you should be immediately directed to your (hopefully, beautifully configured) grub graphical 
 Arch Linux boot screen.

 This solution also works when you have installed Arch Linux as an UEFI-enabled Guest system within VirtualBox.

 __________________________


 External USB HDD/SSD Encrypted Arch Installation:

 Almost all of my standard Arch install procedure can be followed without modification when installing Arch to an external device.

 However, if you already have an encrypted Arch installation on a system HDD/SSD, you must ensure the names assigned to your
 PV, VG and LVs are different than whatever you used on your system drive's Arch installation.  Failure to use different names 
 will cause major udev and therefore, /dev/mapper, assignment problems for you, especially when you try to mount your
 multiple encrypted Arch drives!

 Additionally, we don't want to instruct grub to use standard device names as these are very likely to change when using an 
 external USB drive.  For example, our external SSD may be assigned /dev/sdc by udev during installation, but when we try to
 initially boot from it, udev may assign that external SSD to /dev/sdb, resulting in an unbootable system.

 The solution is to use PARTUUID, as opposed to a standard device name, in the cryptdevice statement in /etc/default/grub.

 Therefore, instead of using this example from above:

 GRUB_CMDLINE_LINUX="cryptdevice=/dev/sdXZ:2016-Global-OpSec-Champion-LyingHillary resume=/dev/mapper/Arch-swap"

 Run 'blkid' as root, and find the correct PARTUUID for your external device's encrypted partition.

 N.B.:  PARTUUIDs are completely unrelated to UUIDs.

 Substitute the correct PARTUUID for the standard device name.  You should end up with a statement that looks similar to this:

 GRUB_CMDLINE_LINUX="cryptdevice=PARTUUID=4d2aed94-92d4-7b5e-b8df-81d7554495cf4:ArchUSBSSD resume=/dev/mapper/ArchSSD-swap"

 Now regardless of the device name assigned by udev to your external drive, the kernel will be able to find the
 correct cryptdevice.

 All other parts of my installation procedure should be followed without modification.

 __________________________


 Multi-OS-Booting Notes:

 I UEFI boot and run more than five operating systems from my SSD.
 All of my OSes UEFI boot from my single, 100 MiB, EFI partition.
 All of my OSes have encrypted root and swap, utilizing my SSD's native hardware-based AES-256-bit encryption support
 with BitLocker or Linux's software-based LUKS on LVM encryption to secure my data, when at rest.
 My Arch Linux install is just another encrypted Linux OS installation that happens to reside on my SSD.

 If you multi-boot, ensure you mount Arch's /boot/efi at your existing ESP partition.
 If you installed Windows 10 first, your EFI partition is likely to be /dev/sda2.

 In all cases, /boot, /boot/efi, and '/' partitions, at a minimum, are required to be mounted during Arch installation.

 As an example, an EFI-addicted, multi-OS booter might be doing something like:

 mount /dev/mapper/Arch-root /mnt
 swapon /dev/mapper/Arch-swap
 mkdir /mnt/boot
 mount /dev/sda17 /mnt/boot
 mkdir /mnt/boot/efi
 mount /dev/sda2 /mnt/boot/efi

 In this example, the user is likely to be using /dev/sda18 as the physical drive partition where their encrypted
 Arch root and swap filesystems will reside.  Note the user's re-use of their existing EFI partition which resides
 at /dev/sda2.

 Adapt, as necessary, for your drive's partition structure.

 Following successful Arch system installation, the path to your Arch-EFI boot file should be:

 /boot/efi/EFI/ArchLinux/grubx64.efi

 When you are multi-OS booting correctly, you should have one directory per operating system, each residing at:

 /boot/efi/EFI/

 __________________________


 BitLocker Users on Windows Notes:

 If you are running hardware-based BitLocker encryption on Windows, I recommend you Turn Off BitLocker encryption prior to
 installing Arch, or any other operating system.  

 As I don't use software-based BitLocker, I cannot say whether leaving it enabled during Arch installation will cause problems.
 Obviously, if you experience issues, you could turn BitLocker off temporarily.

 You can tell if you are using AES-256 bit hardware-based BitLocker encryption when you run from within PowerShell,
 as an Administrator:

 PS C:\WINDOWS\system32> manage-bde -status 

 You see this line:
 Encryption Method:    Hardware Encryption - 1.3.111.2.1619.0.1.2

 Also note that hardware-based BitLocker can either encrypt, or decrypt, a multi-hundred GiB drive in less than 3 seconds.
 You can re-enable BitLocker after your new encrypted Arch system is UEFI booting correctly and running smoothly.

 __________________________


 Installing a Plasma-KDE Desktop Post Arch Install

 After you have rebooted into your new Arch system, and are satisfied that every aspect of your system is running correctly,
 if you're like most people not running an Arch server, you will likely want to install a desktop so you can utilize your new 
 Arch system productively.

 Your choice of desktop environment is entirely up to you.  Personally, I have tried them all.  It is my opinion that if 
 you are running a modern, reasonably powered PC or laptop you are doing yourself a significant disservice by running any 
 of the 'lightweight desktops.'  I also think the Gnome DE is best suited for children, or unskilled users.  Keep in mind 
 that you can install multiple desktops, and then choose which one to fire up at each login, but that is beyond the scope 
 of this guide.

 I prefer the Plasma5-KDE environment over all the others.  If you would like to efficiently install a full Plasma5-KDE 
 environment, do the following, in this order:

 # Log in as root, and not as a user

 # Fully update your Arch system:

 pacman -Syu  # If a new kernel becomes available and is now installed, reboot, before proceeding.

 # If you don't have network connectivity in your Arch system, run:

 systemctl start dhcpcd <ethernet or wlan interface name>

 # Now that you have an updated system, do:

 pacman -S linux-headers

 pacman -S dkms  # This will automatically rebuild your kernel modules as new upstream kernels are released.

 pacman -S xorg  #  This will install a mandatory X server.

 pacman -S xorg-apps

 reboot

 __________________________


 # Log in as root, and not as a user, and do:

 pacman -S plasma-meta  # This large package set will also provide us with sddm, the recommended Plasma5 login manager.

 systemctl enable sddm

 systemctl enable NetworkManager  # After your next reboot you will have full, correct, networking support from boot.

 pacman -S kde-applications-meta

 pacman -S xdg-user-dirs

 # If you want full (US English) spelling support for all of your applications, do:

 pacman -S hunspell-en_US hyphen-en libmythes mythes-en aspell-en

 # Everyone has their own font preferences, but I agree with Arch's initial ttf-font recommendations because they look great!:

 pacman -S ttf-dejavu ttf-liberation

 reboot

 __________________________


 # Log in to sddm's GUI as your user

 # Your first stop is System Settings.  Tweak 'all the things' into full compliance with 'your way.'

 # Go ROCK your fully enabled Plasma DE, and your properly encrypted Arch Linux system!!!