Last active
August 19, 2024 16:38
-
-
Save HarvsG/40468d1d0e3f444d9a1907f26a503bc6 to your computer and use it in GitHub Desktop.
ESPHome configs for M5Stack Atom Echo.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # This config enables micro wake word 2 the 'use micro wake word' toggles between it and streaming audio to HA for wake word detection | |
| # Replies come through the terrible on-device speaker | |
| substitutions: | |
| name: m5stack-atom-echo | |
| friendly_name: M5Stack Atom Echo | |
| esphome: | |
| name: ${name} | |
| name_add_mac_suffix: true | |
| friendly_name: ${friendly_name} | |
| min_version: 2024.7.1 | |
| project: | |
| name: m5stack.atom-echo-voice-assistant | |
| version: "24.7.4.1" | |
| esp32: | |
| board: m5stack-atom | |
| framework: | |
| type: esp-idf | |
| logger: | |
| api: | |
| encryption: | |
| key: +someapikey= | |
| ota: | |
| - platform: esphome | |
| id: ota_esphome | |
| dashboard_import: | |
| package_import_url: github://esphome/firmware/voice-assistant/m5stack-atom-echo.yaml@main | |
| wifi: | |
| ssid: !secret wifi_ssid | |
| password: !secret wifi_password | |
| button: | |
| - platform: factory_reset | |
| id: factory_reset_btn | |
| name: Factory reset | |
| i2s_audio: | |
| - id: i2s_audio_bus | |
| i2s_lrclk_pin: GPIO33 | |
| i2s_bclk_pin: GPIO19 | |
| microphone: | |
| - platform: i2s_audio | |
| id: echo_microphone | |
| i2s_din_pin: GPIO23 | |
| adc_type: external | |
| pdm: true | |
| speaker: | |
| - platform: i2s_audio | |
| id: echo_speaker | |
| i2s_dout_pin: GPIO22 | |
| dac_type: external | |
| mode: mono | |
| voice_assistant: | |
| id: va | |
| microphone: echo_microphone | |
| speaker: echo_speaker | |
| noise_suppression_level: 2 | |
| auto_gain: 31dBFS | |
| volume_multiplier: 2.0 | |
| vad_threshold: 3 | |
| on_listening: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| effect: "Slow Pulse" | |
| on_stt_vad_end: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| effect: "Fast Pulse" | |
| on_tts_start: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| brightness: 100% | |
| effect: none | |
| on_end: | |
| - delay: 100ms | |
| - voice_assistant.stop: | |
| - wait_until: | |
| not: | |
| voice_assistant.is_running: | |
| - wait_until: | |
| not: | |
| switch.is_on: timer_ringing | |
| - if: | |
| condition: | |
| switch.is_on: use_micro_wake_word | |
| then: | |
| - micro_wake_word.start: | |
| - script.execute: reset_led | |
| else: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| on_error: | |
| - light.turn_on: | |
| id: led | |
| red: 100% | |
| green: 0% | |
| blue: 0% | |
| brightness: 100% | |
| effect: none | |
| - delay: 2s | |
| - script.execute: reset_led | |
| on_client_connected: | |
| - delay: 5s | |
| - if: | |
| condition: | |
| switch.is_on: use_micro_wake_word | |
| then: | |
| - micro_wake_word.start: | |
| else: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| on_client_disconnected: | |
| - voice_assistant.stop: | |
| - micro_wake_word.stop: | |
| on_timer_finished: | |
| - voice_assistant.stop: | |
| - micro_wake_word.stop: | |
| - switch.turn_on: timer_ringing | |
| - wait_until: | |
| not: | |
| microphone.is_capturing: | |
| - light.turn_on: | |
| id: led | |
| red: 0% | |
| green: 100% | |
| blue: 0% | |
| brightness: 100% | |
| effect: "Fast Pulse" | |
| - while: | |
| condition: | |
| switch.is_on: timer_ringing | |
| then: | |
| - lambda: id(echo_speaker).play(id(timer_finished_wave_file), sizeof(id(timer_finished_wave_file))); | |
| - delay: 1s | |
| - wait_until: | |
| not: | |
| speaker.is_playing: | |
| - light.turn_off: led | |
| - switch.turn_off: timer_ringing | |
| - if: | |
| condition: | |
| switch.is_on: use_micro_wake_word | |
| then: | |
| - micro_wake_word.start: | |
| - script.execute: reset_led | |
| else: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| binary_sensor: | |
| # butto does the following: | |
| # short click - stop a timer, if no timer then restart either microwakeword or voice assistant continuous | |
| - platform: gpio | |
| pin: | |
| number: GPIO39 | |
| inverted: true | |
| name: Button | |
| disabled_by_default: true | |
| entity_category: diagnostic | |
| id: echo_button | |
| on_multi_click: | |
| - timing: | |
| - ON for at least 50ms | |
| - OFF for at least 50ms | |
| then: | |
| - if: | |
| condition: | |
| switch.is_on: timer_ringing | |
| then: | |
| - switch.turn_off: timer_ringing | |
| else: | |
| - if: | |
| condition: | |
| switch.is_on: use_micro_wake_word | |
| then: | |
| - voice_assistant.stop | |
| - micro_wake_word.stop: | |
| - delay: 1s | |
| - script.execute: reset_led | |
| - script.wait: reset_led | |
| - micro_wake_word.start: | |
| else: | |
| - if: | |
| condition: voice_assistant.is_running | |
| then: | |
| - voice_assistant.stop: | |
| - script.execute: reset_led | |
| - voice_assistant.start_continuous: | |
| - timing: | |
| - ON for at least 10s | |
| then: | |
| - button.press: factory_reset_btn | |
| light: | |
| - platform: esp32_rmt_led_strip | |
| id: led | |
| name: None | |
| disabled_by_default: true | |
| entity_category: config | |
| pin: GPIO27 | |
| default_transition_length: 0s | |
| chipset: SK6812 | |
| num_leds: 1 | |
| rgb_order: grb | |
| rmt_channel: 0 | |
| effects: | |
| - pulse: | |
| name: "Slow Pulse" | |
| transition_length: 250ms | |
| update_interval: 250ms | |
| min_brightness: 50% | |
| max_brightness: 100% | |
| - pulse: | |
| name: "Fast Pulse" | |
| transition_length: 100ms | |
| update_interval: 100ms | |
| min_brightness: 50% | |
| max_brightness: 100% | |
| script: | |
| - id: reset_led | |
| then: | |
| - if: | |
| condition: | |
| - switch.is_on: use_micro_wake_word | |
| - switch.is_on: use_listen_light | |
| then: | |
| - light.turn_on: | |
| id: led | |
| red: 100% | |
| green: 89% | |
| blue: 71% | |
| brightness: 60% | |
| effect: none | |
| else: | |
| - if: | |
| condition: | |
| - switch.is_off: use_micro_wake_word | |
| - switch.is_on: use_listen_light | |
| then: | |
| - light.turn_on: | |
| id: led | |
| red: 0% | |
| green: 100% | |
| blue: 100% | |
| brightness: 60% | |
| effect: none | |
| else: | |
| - light.turn_off: led | |
| switch: | |
| - platform: template | |
| name: Use micro wake word | |
| id: use_micro_wake_word | |
| optimistic: true | |
| restore_mode: RESTORE_DEFAULT_ON | |
| entity_category: config | |
| on_turn_on: | |
| - voice_assistant.stop: | |
| - lambda: id(va).set_use_wake_word(false); | |
| - delay: 1s | |
| - micro_wake_word.start: | |
| - script.execute: reset_led | |
| on_turn_off: | |
| - micro_wake_word.stop: | |
| - lambda: id(va).set_use_wake_word(true); | |
| - delay: 1s | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| - platform: template | |
| name: Use listen light | |
| id: use_listen_light | |
| optimistic: true | |
| restore_mode: RESTORE_DEFAULT_ON | |
| entity_category: config | |
| on_turn_on: | |
| - script.execute: reset_led | |
| on_turn_off: | |
| - script.execute: reset_led | |
| - platform: template | |
| id: timer_ringing | |
| optimistic: true | |
| internal: true | |
| restore_mode: ALWAYS_OFF | |
| on_turn_on: | |
| - delay: 15min | |
| - switch.turn_off: timer_ringing | |
| external_components: | |
| - source: github://pr#5230 | |
| components: | |
| - esp_adf | |
| refresh: 0s | |
| - source: github://jesserockz/esphome-components | |
| components: [file] | |
| refresh: 0s | |
| - source: | |
| type: git | |
| url: https://github.com/kahrendt/esphome | |
| ref: mww-v2-external-library | |
| refresh: 0s | |
| components: [ micro_wake_word ] | |
| esp_adf: | |
| file: | |
| - id: timer_finished_wave_file | |
| file: https://github.com/esphome/firmware/raw/main/voice-assistant/sounds/timer_finished.wav | |
| micro_wake_word: | |
| on_wake_word_detected: | |
| - voice_assistant.start: | |
| wake_word: !lambda return wake_word; | |
| vad: | |
| model: https://github.com/kahrendt/microWakeWord/releases/download/v2.1_models/vad.json | |
| models: | |
| - model: https://github.com/kahrendt/microWakeWord/releases/download/v2.1_models/okay_nabu.json | |
| # - model: https://github.com/kahrendt/microWakeWord/releases/download/v2.1_models/hey_jarvis.json | |
| # - model: https://github.com/kahrendt/microWakeWord/releases/download/v2.1_models/hey_mycroft.json |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # This config enables micro wake word 2 the 'use micro wake word' toggles between it and streaming audio to HA for wake word detection | |
| # Replies come through `media_player.xxxxxx` where xxxxxx is the media_player name set in the text input in the config box of the device | |
| # in the HA UI, see https://community.home-assistant.io/t/how-to-access-device-area-as-a-variable-within-esphome-config/748195/17 | |
| substitutions: | |
| name: m5stack-atom-echo | |
| friendly_name: M5Stack Atom Echo | |
| esphome: | |
| name: ${name} | |
| name_add_mac_suffix: true | |
| friendly_name: ${friendly_name} | |
| min_version: 2024.7.1 | |
| project: | |
| name: m5stack.atom-echo-voice-assistant | |
| version: "24.7.4.1" | |
| esp32: | |
| board: m5stack-atom | |
| framework: | |
| type: esp-idf | |
| logger: | |
| api: | |
| encryption: | |
| key: +someapikey= | |
| ota: | |
| - platform: esphome | |
| id: ota_esphome | |
| dashboard_import: | |
| package_import_url: github://esphome/firmware/voice-assistant/m5stack-atom-echo.yaml@main | |
| wifi: | |
| ssid: !secret wifi_ssid | |
| password: !secret wifi_password | |
| button: | |
| - platform: factory_reset | |
| id: factory_reset_btn | |
| name: Factory reset | |
| i2s_audio: | |
| - id: i2s_audio_bus | |
| i2s_lrclk_pin: GPIO33 | |
| i2s_bclk_pin: GPIO19 | |
| microphone: | |
| - platform: i2s_audio | |
| id: echo_microphone | |
| i2s_din_pin: GPIO23 | |
| adc_type: external | |
| pdm: true | |
| text: | |
| - platform: template | |
| name: Media Player | |
| id: media_player | |
| mode: text | |
| optimistic: true | |
| restore_value: true # Save value every 60 seconds | |
| entity_category: config | |
| icon: mdi:cast | |
| #speaker: | |
| # - platform: i2s_audio | |
| # id: echo_speaker | |
| # i2s_dout_pin: GPIO21 # <- speaker is on 22 so this disables the speaker | |
| # dac_type: external | |
| # mode: mono | |
| voice_assistant: | |
| id: va | |
| microphone: echo_microphone | |
| # speaker: echo_speaker | |
| noise_suppression_level: 2 | |
| auto_gain: 31dBFS | |
| volume_multiplier: 2.0 | |
| vad_threshold: 3 | |
| on_listening: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| effect: "Slow Pulse" | |
| on_stt_vad_end: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| effect: "Fast Pulse" | |
| on_tts_start: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| brightness: 100% | |
| effect: none | |
| on_end: | |
| - delay: 100ms | |
| - voice_assistant.stop: | |
| - wait_until: | |
| not: | |
| voice_assistant.is_running: | |
| - wait_until: | |
| not: | |
| switch.is_on: timer_ringing | |
| - if: | |
| condition: | |
| switch.is_on: use_micro_wake_word | |
| then: | |
| - micro_wake_word.start: | |
| - script.execute: reset_led | |
| else: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| on_error: | |
| - light.turn_on: | |
| id: led | |
| red: 100% | |
| green: 0% | |
| blue: 0% | |
| brightness: 100% | |
| effect: none | |
| - delay: 2s | |
| - script.execute: reset_led | |
| on_client_connected: | |
| - delay: 5s | |
| - if: | |
| condition: | |
| switch.is_on: use_micro_wake_word | |
| then: | |
| - micro_wake_word.start: | |
| else: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| on_client_disconnected: | |
| - voice_assistant.stop: | |
| - micro_wake_word.stop: | |
| on_timer_finished: | |
| - voice_assistant.stop: | |
| - micro_wake_word.stop: | |
| - switch.turn_on: timer_ringing | |
| - wait_until: | |
| not: | |
| microphone.is_capturing: | |
| - light.turn_on: | |
| id: led | |
| red: 0% | |
| green: 100% | |
| blue: 0% | |
| brightness: 100% | |
| effect: "Fast Pulse" | |
| - while: | |
| condition: | |
| switch.is_on: timer_ringing | |
| then: | |
| - homeassistant.service: | |
| service: media_player.play_media | |
| data: | |
| entity_id: !lambda |- | |
| return "media_player." + id(media_player).state; | |
| media_content_id: https://github.com/esphome/firmware/raw/main/voice-assistant/sounds/timer_finished.wav | |
| media_content_type: music | |
| announce: "true" | |
| - delay: 1s | |
| - light.turn_off: led | |
| - switch.turn_off: timer_ringing | |
| - if: | |
| condition: | |
| switch.is_on: use_micro_wake_word | |
| then: | |
| - micro_wake_word.start: | |
| - script.execute: reset_led | |
| else: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| on_tts_end: | |
| - homeassistant.service: | |
| service: media_player.play_media | |
| data: | |
| entity_id: !lambda |- | |
| return "media_player." + id(media_player).state; | |
| media_content_id: !lambda 'return x;' | |
| media_content_type: music | |
| announce: "true" | |
| binary_sensor: | |
| # butto does the following: | |
| # short click - stop a timer, if no timer then restart either microwakeword or voice assistant continuous | |
| - platform: gpio | |
| pin: | |
| number: GPIO39 | |
| inverted: true | |
| name: Button | |
| disabled_by_default: true | |
| entity_category: diagnostic | |
| id: echo_button | |
| on_multi_click: | |
| - timing: | |
| - ON for at least 50ms | |
| - OFF for at least 50ms | |
| then: | |
| - if: | |
| condition: | |
| switch.is_on: timer_ringing | |
| then: | |
| - switch.turn_off: timer_ringing | |
| else: | |
| - if: | |
| condition: | |
| switch.is_on: use_micro_wake_word | |
| then: | |
| - voice_assistant.stop | |
| - micro_wake_word.stop: | |
| - delay: 1s | |
| - script.execute: reset_led | |
| - script.wait: reset_led | |
| - micro_wake_word.start: | |
| else: | |
| - if: | |
| condition: voice_assistant.is_running | |
| then: | |
| - voice_assistant.stop: | |
| - script.execute: reset_led | |
| - voice_assistant.start_continuous: | |
| - timing: | |
| - ON for at least 10s | |
| then: | |
| - button.press: factory_reset_btn | |
| light: | |
| - platform: esp32_rmt_led_strip | |
| id: led | |
| name: None | |
| disabled_by_default: true | |
| entity_category: config | |
| pin: GPIO27 | |
| default_transition_length: 0s | |
| chipset: SK6812 | |
| num_leds: 1 | |
| rgb_order: grb | |
| rmt_channel: 0 | |
| effects: | |
| - pulse: | |
| name: "Slow Pulse" | |
| transition_length: 250ms | |
| update_interval: 250ms | |
| min_brightness: 50% | |
| max_brightness: 100% | |
| - pulse: | |
| name: "Fast Pulse" | |
| transition_length: 100ms | |
| update_interval: 100ms | |
| min_brightness: 50% | |
| max_brightness: 100% | |
| script: | |
| - id: reset_led | |
| then: | |
| - if: | |
| condition: | |
| - switch.is_on: use_micro_wake_word | |
| - switch.is_on: use_listen_light | |
| then: | |
| - light.turn_on: | |
| id: led | |
| red: 100% | |
| green: 89% | |
| blue: 71% | |
| brightness: 60% | |
| effect: none | |
| else: | |
| - if: | |
| condition: | |
| - switch.is_off: use_micro_wake_word | |
| - switch.is_on: use_listen_light | |
| then: | |
| - light.turn_on: | |
| id: led | |
| red: 0% | |
| green: 100% | |
| blue: 100% | |
| brightness: 60% | |
| effect: none | |
| else: | |
| - light.turn_off: led | |
| switch: | |
| - platform: template | |
| name: Use micro wake word | |
| id: use_micro_wake_word | |
| optimistic: true | |
| restore_mode: RESTORE_DEFAULT_ON | |
| entity_category: config | |
| on_turn_on: | |
| - voice_assistant.stop: | |
| - lambda: id(va).set_use_wake_word(false); | |
| - delay: 1s | |
| - micro_wake_word.start: | |
| - script.execute: reset_led | |
| on_turn_off: | |
| - micro_wake_word.stop: | |
| - lambda: id(va).set_use_wake_word(true); | |
| - delay: 1s | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| - platform: template | |
| name: Use listen light | |
| id: use_listen_light | |
| optimistic: true | |
| restore_mode: RESTORE_DEFAULT_ON | |
| entity_category: config | |
| on_turn_on: | |
| - script.execute: reset_led | |
| on_turn_off: | |
| - script.execute: reset_led | |
| - platform: template | |
| id: timer_ringing | |
| optimistic: true | |
| internal: true | |
| restore_mode: ALWAYS_OFF | |
| on_turn_on: | |
| - delay: 15min | |
| - switch.turn_off: timer_ringing | |
| external_components: | |
| - source: github://pr#5230 | |
| components: | |
| - esp_adf | |
| refresh: 0s | |
| - source: github://jesserockz/esphome-components | |
| components: [file] | |
| refresh: 0s | |
| - source: | |
| type: git | |
| url: https://github.com/kahrendt/esphome | |
| ref: mww-v2-external-library | |
| refresh: 0s | |
| components: [ micro_wake_word ] | |
| esp_adf: | |
| #file: | |
| # - id: timer_finished_wave_file | |
| # file: https://github.com/esphome/firmware/raw/main/voice-assistant/sounds/timer_finished.wav | |
| micro_wake_word: | |
| on_wake_word_detected: | |
| - voice_assistant.start: | |
| wake_word: !lambda return wake_word; | |
| vad: | |
| model: https://github.com/kahrendt/microWakeWord/releases/download/v2.1_models/vad.json | |
| models: | |
| - model: https://github.com/kahrendt/microWakeWord/releases/download/v2.1_models/okay_nabu.json | |
| # - model: https://github.com/kahrendt/microWakeWord/releases/download/v2.1_models/hey_jarvis.json | |
| # - model: https://github.com/kahrendt/microWakeWord/releases/download/v2.1_models/hey_mycroft.json |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # This config uses micro wake word 2 optionally | |
| # It also allows the user to choose a media_player to play replies on | |
| substitutions: | |
| name: m5stack-atom-echo | |
| friendly_name: M5Stack Atom Echo | |
| micro_wake_word_model: hey_jarvis # hey_jarvis and hey_mycroft are also supported | |
| esphome: | |
| name: ${name} | |
| name_add_mac_suffix: true | |
| friendly_name: ${friendly_name} | |
| min_version: 2024.7.1 | |
| project: | |
| name: m5stack.atom-echo-wake-word-voice-assistant | |
| version: "24.7.4.1" | |
| on_boot: | |
| priority: 600 | |
| then: | |
| - if: | |
| condition: | |
| lambda: return id(reply_location).state == "On device"; | |
| then: | |
| - logger.log: "setting speaker to echo_speaker in on_boot" | |
| - lambda: id(va).set_speaker(echo_speaker); | |
| else: | |
| - logger.log: "Using another media player so speaker not set" | |
| esp32: | |
| board: m5stack-atom | |
| framework: | |
| type: esp-idf | |
| logger: | |
| api: | |
| encryption: | |
| key: !secret m5_stack_api_key | |
| ota: | |
| - platform: esphome | |
| id: ota_esphome | |
| - platform: http_request | |
| id: ota_http_request | |
| update: | |
| - platform: http_request | |
| id: update_http_request | |
| name: Firmware | |
| source: https://firmware.esphome.io/wake-word-voice-assistant/m5stack-atom-echo/manifest.json | |
| http_request: | |
| dashboard_import: | |
| package_import_url: github://esphome/firmware/wake-word-voice-assistant/m5stack-atom-echo.yaml@main | |
| wifi: | |
| ssid: !secret wifi_ssid | |
| password: !secret wifi_password | |
| ap: | |
| improv_serial: | |
| button: | |
| - platform: factory_reset | |
| id: factory_reset_btn | |
| name: Factory reset | |
| - platform: restart | |
| id: restart_btn | |
| internal: true | |
| i2s_audio: | |
| - id: i2s_audio_bus | |
| i2s_lrclk_pin: GPIO33 | |
| i2s_bclk_pin: GPIO19 | |
| microphone: | |
| - platform: i2s_audio | |
| id: echo_microphone | |
| i2s_din_pin: GPIO23 | |
| adc_type: external | |
| pdm: true | |
| speaker: | |
| - platform: i2s_audio | |
| id: echo_speaker | |
| i2s_dout_pin: GPIO22 | |
| dac_type: external | |
| mode: mono | |
| voice_assistant: | |
| id: va | |
| microphone: echo_microphone | |
| noise_suppression_level: 2 | |
| auto_gain: 31dBFS | |
| volume_multiplier: 2.0 | |
| vad_threshold: 3 | |
| on_listening: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| effect: "Slow Pulse" | |
| on_stt_vad_end: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| effect: "Fast Pulse" | |
| on_tts_start: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| brightness: 100% | |
| effect: none | |
| on_end: | |
| - delay: 100ms | |
| - voice_assistant.stop: | |
| - wait_until: | |
| not: | |
| voice_assistant.is_running: | |
| - wait_until: | |
| not: | |
| switch.is_on: timer_ringing | |
| - if: | |
| condition: | |
| lambda: return id(wake_word_engine_location).state == "On device"; | |
| then: | |
| - micro_wake_word.start: | |
| - script.execute: reset_led | |
| else: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| on_error: | |
| - light.turn_on: | |
| id: led | |
| red: 100% | |
| green: 0% | |
| blue: 0% | |
| brightness: 100% | |
| effect: none | |
| - delay: 2s | |
| - script.execute: reset_led | |
| on_client_connected: | |
| - delay: 5s | |
| - if: | |
| condition: | |
| lambda: return id(wake_word_engine_location).state == "On device"; | |
| then: | |
| - micro_wake_word.start: | |
| else: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| on_client_disconnected: | |
| - voice_assistant.stop: | |
| - micro_wake_word.stop: | |
| ## external media play support, on_timer_finished overwritten | |
| on_timer_finished: | |
| - voice_assistant.stop: | |
| - micro_wake_word.stop: | |
| - switch.turn_on: timer_ringing | |
| - wait_until: | |
| not: | |
| microphone.is_capturing: | |
| - light.turn_on: | |
| id: led | |
| red: 0% | |
| green: 100% | |
| blue: 0% | |
| brightness: 100% | |
| effect: "Fast Pulse" | |
| - while: | |
| condition: | |
| switch.is_on: timer_ringing | |
| then: | |
| - if: | |
| condition: | |
| lambda: return id(reply_location).state == "Another Media Player"; | |
| then: | |
| - homeassistant.service: | |
| service: media_player.play_media | |
| data: | |
| entity_id: !lambda |- | |
| return id(media_player).state; | |
| media_content_id: https://github.com/esphome/firmware/raw/main/voice-assistant/sounds/timer_finished.wav | |
| media_content_type: music | |
| announce: "true" | |
| else: | |
| - lambda: id(echo_speaker).play(id(timer_finished_wave_file), sizeof(id(timer_finished_wave_file))); | |
| - delay: 1s | |
| - wait_until: | |
| not: | |
| speaker.is_playing: | |
| - light.turn_off: led | |
| - switch.turn_off: timer_ringing | |
| - if: | |
| condition: | |
| lambda: return id(wake_word_engine_location).state == "On device"; | |
| then: | |
| - micro_wake_word.start: | |
| - script.execute: reset_led | |
| else: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| on_tts_end: | |
| - if: | |
| condition: | |
| lambda: return id(reply_location).state == "Another Media Player"; | |
| then: | |
| - homeassistant.service: | |
| service: media_player.play_media | |
| data: | |
| entity_id: !lambda |- | |
| return id(media_player).state; | |
| media_content_id: !lambda 'return x;' | |
| media_content_type: music | |
| announce: "true" | |
| binary_sensor: | |
| # button does the following: | |
| # short click - stop a timer | |
| # if no timer then restart either microwakeword or voice assistant continuous | |
| - platform: gpio | |
| pin: | |
| number: GPIO39 | |
| inverted: true | |
| name: Button | |
| disabled_by_default: true | |
| entity_category: diagnostic | |
| id: echo_button | |
| on_multi_click: | |
| - timing: | |
| - ON for at least 50ms | |
| - OFF for at least 50ms | |
| then: | |
| - if: | |
| condition: | |
| switch.is_on: timer_ringing | |
| then: | |
| - switch.turn_off: timer_ringing | |
| else: | |
| - if: | |
| condition: | |
| lambda: return id(wake_word_engine_location).state == "On device"; | |
| then: | |
| - voice_assistant.stop | |
| - micro_wake_word.stop: | |
| - delay: 1s | |
| - script.execute: reset_led | |
| - script.wait: reset_led | |
| - micro_wake_word.start: | |
| else: | |
| - if: | |
| condition: voice_assistant.is_running | |
| then: | |
| - voice_assistant.stop: | |
| - script.execute: reset_led | |
| - voice_assistant.start_continuous: | |
| - timing: | |
| - ON for at least 10s | |
| then: | |
| - button.press: factory_reset_btn | |
| light: | |
| - platform: esp32_rmt_led_strip | |
| id: led | |
| name: None | |
| disabled_by_default: true | |
| entity_category: config | |
| pin: GPIO27 | |
| default_transition_length: 0s | |
| chipset: SK6812 | |
| num_leds: 1 | |
| rgb_order: grb | |
| rmt_channel: 0 | |
| effects: | |
| - pulse: | |
| name: "Slow Pulse" | |
| transition_length: 250ms | |
| update_interval: 250ms | |
| min_brightness: 50% | |
| max_brightness: 100% | |
| - pulse: | |
| name: "Fast Pulse" | |
| transition_length: 100ms | |
| update_interval: 100ms | |
| min_brightness: 50% | |
| max_brightness: 100% | |
| script: | |
| - id: reset_led | |
| then: | |
| - if: | |
| condition: | |
| - lambda: return id(wake_word_engine_location).state == "On device"; | |
| - switch.is_on: use_listen_light | |
| then: | |
| - light.turn_on: | |
| id: led | |
| red: 100% | |
| green: 89% | |
| blue: 71% | |
| brightness: 60% | |
| effect: none | |
| else: | |
| - if: | |
| condition: | |
| - lambda: return id(wake_word_engine_location).state != "On device"; | |
| - switch.is_on: use_listen_light | |
| then: | |
| - light.turn_on: | |
| id: led | |
| red: 0% | |
| green: 100% | |
| blue: 100% | |
| brightness: 60% | |
| effect: none | |
| else: | |
| - light.turn_off: led | |
| switch: | |
| - platform: template | |
| name: Use listen light | |
| id: use_listen_light | |
| optimistic: true | |
| restore_mode: RESTORE_DEFAULT_ON | |
| entity_category: config | |
| on_turn_on: | |
| - script.execute: reset_led | |
| on_turn_off: | |
| - script.execute: reset_led | |
| - platform: template | |
| id: timer_ringing | |
| optimistic: true | |
| internal: true | |
| restore_mode: ALWAYS_OFF | |
| on_turn_on: | |
| - delay: 15min | |
| - switch.turn_off: timer_ringing | |
| select: | |
| - platform: template | |
| entity_category: config | |
| name: Wake word engine location | |
| id: wake_word_engine_location | |
| optimistic: true | |
| restore_value: true | |
| options: | |
| - In Home Assistant | |
| - On device | |
| initial_option: On device | |
| on_value: | |
| - if: | |
| condition: | |
| lambda: return x == "In Home Assistant"; | |
| then: | |
| - micro_wake_word.stop | |
| - delay: 500ms | |
| - lambda: id(va).set_use_wake_word(true); | |
| - voice_assistant.start_continuous: | |
| - if: | |
| condition: | |
| lambda: return x == "On device"; | |
| then: | |
| - lambda: id(va).set_use_wake_word(false); | |
| - voice_assistant.stop | |
| - delay: 500ms | |
| - micro_wake_word.start | |
| - platform: template | |
| entity_category: config | |
| name: Reply Location | |
| id: reply_location | |
| optimistic: true | |
| restore_value: true | |
| options: | |
| - Another Media Player | |
| - On device | |
| initial_option: On device | |
| set_action: | |
| - logger.log: "set_action called for reply_location" | |
| - logger.log: "new value set for reply_location, restarting to clear speaker settings" | |
| - light.turn_on: | |
| id: led | |
| red: 100% | |
| green: 100% | |
| blue: 0% | |
| brightness: 100% | |
| effect: "Fast Pulse" | |
| # restarting should be the device back into a state where va.speaker: is not set | |
| - delay: 5s # give time to write settings | |
| - button.press: restart_btn | |
| text: | |
| - platform: template | |
| name: Media Player Entity ID | |
| id: media_player | |
| mode: text | |
| optimistic: true | |
| restore_value: true # Save value every 60 seconds | |
| entity_category: config | |
| icon: mdi:cast | |
| external_components: | |
| - source: github://pr#5230 | |
| components: | |
| - esp_adf | |
| refresh: 0s | |
| - source: github://jesserockz/esphome-components | |
| components: [file] | |
| refresh: 0s | |
| - source: | |
| type: git | |
| url: https://github.com/kahrendt/esphome | |
| ref: mww-v2-external-library | |
| refresh: 0s | |
| components: [ micro_wake_word ] | |
| esp_adf: | |
| file: | |
| - id: timer_finished_wave_file | |
| file: https://github.com/esphome/firmware/raw/main/voice-assistant/sounds/timer_finished.wav | |
| micro_wake_word: | |
| on_wake_word_detected: | |
| - voice_assistant.start: | |
| wake_word: !lambda return wake_word; | |
| vad: | |
| models: | |
| - model: ${micro_wake_word_model} |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # This is essentially the default pre-micro wake word config but edited to reply on a media player | |
| # edit lines 147 and 164 for your media player | |
| esphome: | |
| name: m5stack-atom-echo | |
| friendly_name: M5Stack Atom Echo | |
| min_version: 2024.6.0 | |
| name_add_mac_suffix: true | |
| project: | |
| name: m5stack.atom-echo-voice-assistant | |
| version: "24.7.4.1" | |
| esp32: | |
| board: m5stack-atom | |
| framework: | |
| type: esp-idf | |
| logger: | |
| api: | |
| encryption: | |
| key: +someapikey= | |
| ota: | |
| - platform: esphome | |
| id: ota_esphome | |
| - platform: http_request | |
| id: ota_http_request | |
| update: | |
| http_request: | |
| dashboard_import: | |
| package_import_url: github://esphome/firmware/voice-assistant/m5stack-atom-echo.yaml@main | |
| wifi: | |
| ssid: !secret wifi_ssid | |
| password: !secret wifi_password | |
| on_connect: | |
| - delay: 5s # Gives time for improv results to be transmitted | |
| - ble.disable: | |
| on_disconnect: | |
| - ble.enable: | |
| ap: | |
| esp32_improv: | |
| authorizer: none | |
| button: | |
| - platform: safe_mode | |
| id: button_safe_mode | |
| name: Safe Mode Boot | |
| - platform: factory_reset | |
| id: factory_reset_btn | |
| name: Factory reset | |
| i2s_audio: | |
| - id: i2s_audio_bus | |
| i2s_lrclk_pin: GPIO33 | |
| i2s_bclk_pin: GPIO19 | |
| microphone: | |
| - platform: i2s_audio | |
| id: echo_microphone | |
| i2s_din_pin: GPIO23 | |
| adc_type: external | |
| pdm: true | |
| speaker: | |
| - platform: i2s_audio | |
| id: echo_speaker | |
| i2s_dout_pin: GPIO21 | |
| dac_type: external | |
| mode: mono | |
| voice_assistant: | |
| id: va | |
| microphone: echo_microphone | |
| speaker: echo_speaker | |
| noise_suppression_level: 2 | |
| auto_gain: 31dBFS | |
| volume_multiplier: 2.0 | |
| vad_threshold: 3 | |
| on_listening: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| effect: "Slow Pulse" | |
| on_stt_vad_end: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| effect: "Fast Pulse" | |
| on_tts_start: | |
| - light.turn_on: | |
| id: led | |
| blue: 100% | |
| red: 0% | |
| green: 0% | |
| brightness: 100% | |
| effect: none | |
| on_end: | |
| - delay: 100ms | |
| - wait_until: | |
| not: | |
| switch.is_on: timer_ringing | |
| - script.execute: reset_led | |
| on_error: | |
| - light.turn_on: | |
| id: led | |
| red: 100% | |
| green: 0% | |
| blue: 0% | |
| brightness: 100% | |
| effect: none | |
| - delay: 1s | |
| - script.execute: reset_led | |
| on_client_connected: | |
| - if: | |
| condition: | |
| switch.is_on: use_wake_word | |
| then: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| on_client_disconnected: | |
| - if: | |
| condition: | |
| switch.is_on: use_wake_word | |
| then: | |
| - voice_assistant.stop: | |
| - light.turn_off: led | |
| on_timer_finished: # not currently working as it plays after the default version see https://community.home-assistant.io/t/how-to-override-an-action-in-a-package/748237 and https://github.com/esphome/issues/issues/6035 | |
| - switch.turn_on: timer_ringing | |
| - light.turn_on: | |
| id: led | |
| red: 0% | |
| green: 100% | |
| blue: 0% | |
| brightness: 100% | |
| effect: "Fast Pulse" | |
| - while: | |
| condition: | |
| switch.is_on: timer_ringing | |
| then: | |
| - homeassistant.service: | |
| service: media_player.play_media | |
| data: | |
| entity_id: media_player.study_speaker # <- this is hard-coded | |
| media_content_id: https://github.com/esphome/firmware/raw/main/voice-assistant/sounds/timer_finished.wav | |
| media_content_type: music | |
| announce: "true" | |
| - delay: 1s | |
| - light.turn_off: led | |
| - switch.turn_off: timer_ringing | |
| - if: | |
| condition: | |
| switch.is_on: use_wake_word | |
| then: | |
| - voice_assistant.start_continuous: | |
| - script.execute: reset_led | |
| on_tts_end: | |
| - homeassistant.service: | |
| service: media_player.play_media | |
| data: | |
| entity_id: media_player.study_speaker # <- this is hard-coded | |
| media_content_id: !lambda 'return x;' | |
| media_content_type: music | |
| announce: "true" | |
| use_wake_word: false | |
| binary_sensor: | |
| - platform: gpio | |
| pin: | |
| number: GPIO39 | |
| inverted: true | |
| name: Button | |
| disabled_by_default: true | |
| entity_category: diagnostic | |
| id: echo_button | |
| on_multi_click: | |
| - timing: | |
| - ON for at least 50ms | |
| - OFF for at least 50ms | |
| then: | |
| - if: | |
| condition: | |
| switch.is_on: timer_ringing | |
| then: | |
| - switch.turn_off: timer_ringing | |
| else: | |
| - if: | |
| condition: | |
| switch.is_off: use_wake_word | |
| then: | |
| - if: | |
| condition: voice_assistant.is_running | |
| then: | |
| - voice_assistant.stop: | |
| - script.execute: reset_led | |
| else: | |
| - voice_assistant.start: | |
| else: | |
| - voice_assistant.stop | |
| - delay: 1s | |
| - script.execute: reset_led | |
| - script.wait: reset_led | |
| - voice_assistant.start_continuous: | |
| - timing: | |
| - ON for at least 10s | |
| then: | |
| - button.press: factory_reset_btn | |
| light: | |
| - platform: esp32_rmt_led_strip | |
| id: led | |
| name: None | |
| disabled_by_default: true | |
| entity_category: config | |
| pin: GPIO27 | |
| default_transition_length: 0s | |
| chipset: SK6812 | |
| num_leds: 1 | |
| rgb_order: grb | |
| rmt_channel: 0 | |
| effects: | |
| - pulse: | |
| name: "Slow Pulse" | |
| transition_length: 250ms | |
| update_interval: 250ms | |
| min_brightness: 50% | |
| max_brightness: 100% | |
| - pulse: | |
| name: "Fast Pulse" | |
| transition_length: 100ms | |
| update_interval: 100ms | |
| min_brightness: 50% | |
| max_brightness: 100% | |
| script: | |
| - id: reset_led | |
| then: | |
| - if: | |
| condition: | |
| - switch.is_on: use_wake_word | |
| - switch.is_on: use_listen_light | |
| then: | |
| - light.turn_on: | |
| id: led | |
| red: 100% | |
| green: 89% | |
| blue: 71% | |
| brightness: 60% | |
| effect: none | |
| else: | |
| - light.turn_off: led | |
| switch: | |
| - platform: template | |
| name: Use wake word | |
| id: use_wake_word | |
| optimistic: true | |
| restore_mode: RESTORE_DEFAULT_ON | |
| entity_category: config | |
| on_turn_on: | |
| - lambda: id(va).set_use_wake_word(true); | |
| - if: | |
| condition: | |
| not: | |
| - voice_assistant.is_running | |
| then: | |
| - voice_assistant.start_continuous | |
| - script.execute: reset_led | |
| on_turn_off: | |
| - voice_assistant.stop | |
| - lambda: id(va).set_use_wake_word(false); | |
| - script.execute: reset_led | |
| - platform: template | |
| name: Use listen light | |
| id: use_listen_light | |
| optimistic: true | |
| restore_mode: RESTORE_DEFAULT_ON | |
| entity_category: config | |
| on_turn_on: | |
| - script.execute: reset_led | |
| on_turn_off: | |
| - script.execute: reset_led | |
| - platform: template | |
| id: timer_ringing | |
| optimistic: true | |
| internal: true | |
| restore_mode: ALWAYS_OFF | |
| on_turn_on: | |
| - delay: 15min | |
| - switch.turn_off: timer_ringing | |
| external_components: | |
| - source: github://pr#5230 | |
| components: | |
| - esp_adf | |
| refresh: 0s | |
| - source: github://jesserockz/esphome-components | |
| components: [file] | |
| refresh: 0s | |
| esp_adf: | |
| file: | |
| - id: timer_finished_wave_file | |
| file: https://github.com/esphome/firmware/raw/main/voice-assistant/sounds/timer_finished.wav |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| substitutions: | |
| name: m5stack-atom-echo-b836b0 | |
| friendly_name: M5Stack Atom Echo b836b0 | |
| packages: | |
| m5stack.atom-echo-voice-assistant: github://esphome/firmware/voice-assistant/m5stack-atom-echo.yaml@main | |
| esphome: | |
| name: ${name} | |
| name_add_mac_suffix: false | |
| friendly_name: ${friendly_name} | |
| api: | |
| encryption: | |
| key: +someapikey= | |
| wifi: | |
| ssid: !secret wifi_ssid | |
| password: !secret wifi_password | |
| # Until https://github.com/esphome/firmware/pull/233 is fixed/merged | |
| update: | |
| - platform: http_request | |
| id: !remove update_http_request | |
| # HarvsG's customisations | |
| speaker: # <- from 2024.7.0 onwards see alternative below | |
| - platform: i2s_audio | |
| id: !extend echo_speaker | |
| i2s_dout_pin: GPIO21 # <- It is actually on 22, so this disables the speaker | |
| voice_assistant: | |
| # speaker:remove! # <- this should work from esphome 2024.7.0 onwards | |
| # volume_multiplier: 8.0 #<- this line is needed for 2024.7.0 but fixed in 2024.7.1 | |
| vad_threshold: 3 | |
| on_tts_end: | |
| - homeassistant.service: | |
| service: media_player.play_media | |
| data: | |
| entity_id: media_player.study_speaker # <- this is hard-coded | |
| media_content_id: !lambda 'return x;' | |
| media_content_type: music | |
| announce: "true" | |
| # on_end: # not currently working as it plays after the default version see https://community.home-assistant.io/t/how-to-override-an-action-in-a-package/748237 and https://github.com/esphome/issues/issues/6035 | |
| # - delay: 100ms | |
| # - wait_until: | |
| # not: | |
| # switch.is_on: timer_ringing | |
| # - script.execute: reset_led | |
| # on_timer_finished: # not currently working as it plays after the default version see https://community.home-assistant.io/t/how-to-override-an-action-in-a-package/748237 and https://github.com/esphome/issues/issues/6035 | |
| # - switch.turn_on: timer_ringing | |
| # - light.turn_on: | |
| # id: led | |
| # red: 0% | |
| # green: 100% | |
| # blue: 0% | |
| # brightness: 100% | |
| # effect: "Fast Pulse" | |
| # - while: | |
| # condition: | |
| # switch.is_on: timer_ringing | |
| # then: | |
| # - homeassistant.service: | |
| # service: media_player.play_media | |
| # data: | |
| # entity_id: media_player.study_speaker # <- this is hard-coded | |
| # media_content_id: https://github.com/esphome/firmware/raw/main/voice-assistant/sounds/timer_finished.wav | |
| # media_content_type: music | |
| # announce: "true" | |
| # - delay: 1s | |
| # - light.turn_off: led | |
| # - switch.turn_off: timer_ringing | |
| # - if: | |
| # condition: | |
| # switch.is_on: use_wake_word | |
| # then: | |
| # - voice_assistant.start_continuous: | |
| # - script.execute: reset_led | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment