Skip to content

Instantly share code, notes, and snippets.

@HighwayStar

HighwayStar/arm32-khadas-head

Created July 1, 2020 09:15
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save HighwayStar/0f16cf4e96135032a1180e9485bf9f17 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save HighwayStar/0f16cf4e96135032a1180e9485bf9f17 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
arm32-khadas-head
GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 156479
BL2 Built : 15:21:18, Aug 28 2019. gxl g1bf2b53 - luan.yuan@droid15-sz
set vdd cpu_a to 1120 mv
set vdd cpu_b to 1050 mv
set vddee to 1000 mv
Board ID = 1
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 912MHz
bist_test rank: 0 1c 09 2f 2b 14 42 16 02 2b 35 1f 4b 1a 06 2f 2c 17 42 1b 03 34 2a 13 42 693 rank: 1 1b 08 2f 2a 13 41 15 01 2a 36 20 4c 16 04 28 2d 18 43 1a 04 30 2b 13 43 693 - PASS
Rank0: 1024MB(auto)-2T-13
Rank1: 1024MB(auto)-2T-13
AddrBus test pass!
eMMC boot @ 0
sw8 s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0
Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0
Load bl33 from eMMC, src: 0x0004c200, des: 0x01000000, size: 0x0007cc00, part: 0
NOTICE: BL3-1: v1.0(release):53f813e
NOTICE: BL3-1: Built : 15:51:23, May 22 2019
NOTICE: BL3-1: GXM normal boot!
NOTICE: BL3-1: BL33 decompress pass
mpu_config_enable:system pre init ok
dmc sec lock
[Image: gxl_v1.1.3390-6ac5299 2019-09-26 14:09:24 luan.yuan@droid15-sz]
OPS=0x82
wdt: reset registers!
22 0b 82 00 ae f6 51 47 0e 8a 0b 5c 1b f8 72 07
[0.621859 Inits done]
secure task start!
high task start!
low task start!
ERROR: Error initializing runtime service opteed_fast
U-Boot 2015.01-g4752efbb90 (Jul 01 2020 - 12:34:43)
DRAM: 2 GiB
Relocation Offset is: 76e84000
register usb cfg[0][1] = 0000000077f50a80
[CANVAS]canvas init
boot_device_flag : 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=7, system=5.0ns
reset failed
get_chip_type and ret:fffffffe
get_chip_type and ret:fffffffe
chip detect failed and ret:fffffffe
nandphy_init failed and ret=0xfffffff1
MMC: aml_priv->desc_buf = 0x0000000073e846b0
aml_priv->desc_buf = 0x0000000073e869f0
SDIO Port B: 0, SDIO Port C: 1
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 40000000
[mmc_startup] mmc refix success
init_part() 297: PART_TYPE_AML
[mmc_init] mmc init success
Amlogic multi-dtb tool
Single dtb detected
start dts,buffer=0000000073e89240,dt_addr=0000000073e89240
get_partition_from_dts() 91: ret 0
Amlogic multi-dtb tool
Single dtb detected
parts: 17
00: logo 0000000000800000 1
01: recovery 0000000001800000 1
02: misc 0000000000800000 1
03: dtbo 0000000000800000 1
04: cri_data 0000000000800000 2
05: param 0000000001000000 2
06: boot 0000000001000000 1
set has_boot_slot = 0
07: rsv 0000000001000000 1
08: metadata 0000000001000000 1
09: vbmeta 0000000000200000 1
10: tee 0000000002000000 1
11: vendor 0000000014000000 1
12: odm 0000000008000000 1
13: system 0000000062c00000 1
14: product 0000000008000000 1
15: cache 0000000046000000 2
16: data ffffffffffffffff 4
init_part() 297: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
mmc env offset: 0x4d400000
In: serial
Out: serial
Err: serial
reboot_mode=cold_boot
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-3477: calc 184c5e2, store 184c5e2
_verify_dtb_checksum()-3477: calc 184c5e2, store 184c5e2
dtb_read()-3694: total valid 2
update_old_dtb()-3675: do nothing
Amlogic multi-dtb tool
Single dtb detected
vpu: clk_level in dts: 7
vpu: vpu_power_on
vpu: set clk: 666667000Hz, readback: 666666667Hz(0x300)
vpu: vpu_module_init_config
vpp: vpp_init
cvbs: cpuid:0x22
hpd_state=0
vpp: vpp_matrix_update: 2
cvbs performance type = 6, table = 0
cvbs_config_hdmipll_gxl
cvbs_set_vid2_clk
vpp: vpp_pq_load pq val error !!!
Net: dwmac.c9410000amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
MACADDR:02:0e:47:51:f6:ae(from chipid)
Warning: dwmac.c9410000 MAC addresses don't match:
Address in SROM is ea:61:ee:05:d1:9c
Address in environment is 02:0e:47:51:f6:ae
CONFIG_AVB2: null
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
wipe_data=successful
wipe_cache=successful
upgrade_step=2
reboot_mode:::: cold_boot
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[region_code] not programed yet
[OSD]load fb addr from dts:/meson-fb
[OSD]fb_addr for logo: 0x7f800000
[OSD]load fb addr from dts:/meson-fb
[OSD]fb_addr for logo: 0x7f800000
[OSD]VPP_OFIFO_SIZE:0xfff00fff
[CANVAS]addr=0x7f800000 width=3840, height=2160
[OSD]osd_hw.free_dst_data: 0,719,0,575
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[region_code] not programed yet
gpio: pin GPIOAO_2 (gpio 102) value is 1
Command: bcb uboot-command
Start read misc partition datas!
BCB hasn't any datas,exit!
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[region_code] not programed yet
Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0
CONFIG_SYSTEM_AS_ROOT: systemroot
system_mode: 1
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
CONFIG_AVB2: null
active_slot: normal
avb2: 0
ee_gate_off ...
avb2: 0
## Booting Android Image at 0x01080000 ...
Kernel command line: androidboot.selinux=permissive androidboot.dtbo_idx=0 --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
active_slot is normal
load dtb from 0x1000000 ......
Amlogic multi-dtb tool
Single dtb detected
find 1 dtbos
dtbos to be applied: 0
Apply dtbo 0
Loading Kernel Image(COMP_NONE) ... OK
kernel loaded at 0x01080000, end = 0x019f5758
Loading Device Tree to 0000000009fee000, end 0000000009fff3e0 ... OK
fdt_instaboot: no instaboot image
Starting kernel ...
uboot time: 2104485 us
domain-0 init dvfs: 4
domain-1 init dvfs: 4
efuse_pw_en: 0x3
WARNING! efuse bits is disabled
Enable A53 JTAG cluster 0 to AO
[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113-gc6fe92f6ac5e-dirty (tomin@linux-13jc) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Wed Jul 1 12:49:43 +08 2020
[ 0.000000@0] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000@0] CPU: div instructions available: patching division code
[ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000@0] Machine model: Amlogic
[ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000@0] 7f800000 - 80000000, 8192 KB, linux,meson-fb
[ 0.000000@0] 7d800000 - 7f800000, 32768 KB, linux,di_cma
[ 0.000000@0] 75c00000 - 7d800000, 126976 KB, linux,ion-dev
[ 0.000000@0] 74c00000 - 75c00000, 16384 KB, linux,vdin1_cma
[ 0.000000@0] Reserved memory: regions without no-map are not yet supported
[ 0.000000@0] 61800000 - 74c00000, 315392 KB, linux,codec_mm_cma
[ 0.000000@0] 61800000 - 61800000, 0 KB, linux,codec_mm_reserved
[ 0.000000@0] cma: Reserved 8 MiB at 0x61000000
[ 0.000000@0] Memory policy: Data cache writealloc
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv0.2 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: Trusted OS migration not required
[ 0.000000@0] percpu: Embedded 15 pages/cpu @eef55000 s32140 r8192 d21108 u61440
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522498
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=1 reboot_mode_android=normal androidboot.selinux=enforcing logo=osd1,loaded,0x3d800000,576cvbs maxcpus=8 vout=576cvbs,enabletx=,444,8bit hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 pq= androidboot.firstboot=1 jtag=apao androidboot.hardware=amlogic androidboot.serialno=1234567890 androidboot.wificountrycode=US ro rootwait skip_initramfs androidboot.selinux=permissive androidboot.dtbo_idx=0 --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
[ 0.000000@0] fb: osd1
[ 0.000000@0] fb: loaded
[ 0.000000@0] fb: 0x3d800000
[ 0.000000@0] fb: 576cvbs
[ 0.000000@0] vout: 576cvbs
[ 0.000000@0] vout: enabletx=: 1
[ 0.000000@0] vout: 444
[ 0.000000@0] vout: get hdmimode: 1080p60hz
[ 0.000000@0] vout: get cvbsmode: 576cvbs
[ 0.000000@0] [amvecm] pq string error !!!
[ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000@0] Memory: 1540932K/2096128K available (14336K kernel code, 1340K rwdata, 5024K rodata, 1024K init, 1399K bss, 43196K reserved, 512000K cma-reserved, 802816K highmem)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000@0] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000@0] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000@0] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000@0] modules : 0xbc000000 - 0xbfe00000 ( 62 MB)
[ 0.000000@0] .text : 0xc0108000 - 0xc1000000 (15328 kB)
[ 0.000000@0] .init : 0xc1600000 - 0xc1700000 (1024 kB)
[ 0.000000@0] .data : 0xc1700000 - 0xc184f268 (1341 kB)
[ 0.000000@0] .bss : 0xc1851000 - 0xc19aee04 (1400 kB)
[ 0.000000@0] zone:Normal, spaned pages:196352, total:196352
[ 0.000000@0] zone:HighMem, spaned pages:327680, total:524032
[ 0.000000@0] page_trace_pre_work, trace buffer:ee800000, size:200000, used:eea00000, end:eea00000
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] Build-time adjustment of leaf fanout to 32.
[ 0.000000@0] NR_IRQS:16 nr_irqs:16 16
[ 0.000000@0] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000@0] amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] amlogic_init_gpu: register meson gpu clk
[ 0.000000@0] amlogic_init_media: register meson media clk
[ 0.000000@0] amlogic_init_misc: register meson misc clk
[ 0.000000@0] gxl_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000014@0] Switching to timer-based delay loop, resolution 41ns
[ 0.000064@0] meson_bc_timer: mclk->mux_reg =f0808990,mclk->reg =f080a994
[ 0.000645@0] Console: colour dummy device 80x30
[ 0.000671@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000686@0] pid_max: default: 32768 minimum: 301
[ 0.000743@0] thread_stack_cache_init, vmap:c0131600, bitmap:c0120800, cache page:60c00
[ 0.000756@0] thread_stack_cache_init, allocation vm area:c0133100, addr:bc000000, size:3001000
[ 0.000818@0] Security Framework initialized
[ 0.000827@0] SELinux: Initializing.
[ 0.000899@0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000914@0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001668@0] CPU: Testing write buffer coherency: ok
[ 0.001712@0] ftrace: allocating 44757 entries in 132 pages
[ 0.087482@0] sched-energy: Sched-energy-costs installed from DT
[ 0.087506@0] CPU0: update cpu_capacity 503
[ 0.087514@0] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.087540@0] Setting up static identity map for 0x200000 - 0x200058
[ 0.129814@0] secmon: can't fine clear_range
[ 0.130197@0] Meson chip version = RevB (22:B - 82:0)
[ 0.175635@1] CPU1: update cpu_capacity 503
[ 0.175641@1] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.207747@2] CPU2: update cpu_capacity 503
[ 0.207753@2] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.239866@3] CPU3: update cpu_capacity 503
[ 0.239871@3] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.271997@4] CPU4: update cpu_capacity 332
[ 0.272004@4] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.304042@5] CPU5: update cpu_capacity 332
[ 0.304047@5] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.336158@6] CPU6: update cpu_capacity 332
[ 0.336162@6] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.368242@7] CPU7: update cpu_capacity 332
[ 0.368246@7] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.368373@0] Brought up 8 CPUs
[ 0.368427@0] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.368434@0] CPU: All CPU(s) started in SVC mode.
[ 0.370228@1] addr:bc07dcce is in kernel, size fix 4096->10, data:mode=0755
[ 0.370446@2] devtmpfs: initialized
[ 0.392991@2] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.393728@2] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.393758@2] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.394010@2] pinctrl core: initialized pinctrl subsystem
[ 0.395422@2] NET: Registered protocol family 16
[ 0.398689@2] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.398706@2] schedtune: init normalization constants...
[ 0.398719@2] schedtune: CLUSTER[0-3] min_pwr: 0 max_pwr: 23
[ 0.398728@2] schedtune: CPU[0] min_pwr: 0 max_pwr: 135
[ 0.398736@2] schedtune: CPU[1] min_pwr: 0 max_pwr: 135
[ 0.398744@2] schedtune: CPU[2] min_pwr: 0 max_pwr: 135
[ 0.398752@2] schedtune: CPU[3] min_pwr: 0 max_pwr: 135
[ 0.398761@2] schedtune: CLUSTER[4-7] min_pwr: 0 max_pwr: 13
[ 0.398769@2] schedtune: CPU[4] min_pwr: 0 max_pwr: 78
[ 0.398777@2] schedtune: CPU[5] min_pwr: 0 max_pwr: 78
[ 0.398785@2] schedtune: CPU[6] min_pwr: 0 max_pwr: 78
[ 0.398794@2] schedtune: CPU[7] min_pwr: 0 max_pwr: 78
[ 0.398802@2] schedtune: SYSTEM min_pwr: 0 max_pwr: 888
[ 0.398811@2] schedtune: using normalization constants mul: 657787785 sh1: 1 sh2: 9
[ 0.398818@2] schedtune: verify normalization constants...
[ 0.398826@2] schedtune: max_pwr/2^0: 888 => norm_pwr: 1024
[ 0.398834@2] schedtune: max_pwr/2^1: 444 => norm_pwr: 512
[ 0.398841@2] schedtune: max_pwr/2^2: 222 => norm_pwr: 256
[ 0.398849@2] schedtune: max_pwr/2^3: 111 => norm_pwr: 128
[ 0.398856@2] schedtune: max_pwr/2^4: 55 => norm_pwr: 63
[ 0.398864@2] schedtune: max_pwr/2^5: 27 => norm_pwr: 31
[ 0.398872@2] schedtune: configured to support 5 boost groups
[ 0.420155@4] cpuidle: using governor menu
[ 0.420379@4] register canvas platform driver
[ 0.420517@3] register rdma platform driver
[ 0.423396@3] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.423410@3] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.423800@3] clkmsr: clkmsr: driver init
[ 0.423811@3] codec_mm_module_init
[ 0.423851@3] media_configs_system_init
[ 0.424231@3] aml_watch_point_probe, in, wp:4
[ 0.424804@3] pstore: using zlib compression
[ 0.425481@3] console [pstore-1] enabled
[ 0.425549@3] pstore: Registered ramoops as persistent store backend
[ 0.425561@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.425572@3] ramoops: ramoops_io_en:0 1 old:0x0 ftrace_size:0x40000
[ 0.429700@3] aml_iomap: amlogic iomap probe done
[ 0.435722@4] vpu: driver version: v20190329(3-gxm)
[ 0.435749@4] vpu: load vpu_clk: 666666667Hz(7)
[ 0.435982@4] vpu: clktree_init
[ 0.436078@4] vpu: vpu_probe OK
[ 0.440778@4] clkmsr: msr_clk_reg0=f0a8775c,msr_clk_reg2=f0a89764
[ 0.440807@4] clkmsr c110875c.meson_clk_msr: failed to get msr ring reg0
[ 0.443186@4] aml_vdac_config_probe: cpu_id:0, name:meson-gx_l_m-vdac
[ 0.443548@3] aml_vdac_probe: ok
[ 0.449059@3] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[ 0.449196@3] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[ 0.449208@3] codec_mm_probe ok
[ 0.449533@3] canvas_probe reg=c8838000,size=400
[ 0.449562@3] canvas maped reg_base =f0aa3000
[ 0.460037@3] cvbs_out: cvbsout_probe, cpu_id:1,name:meson-gxm-cvbsout
[ 0.460177@3] cvbs_out: find performance_pal config
[ 0.460201@3] vout: vout1: register server: cvbs_vout_server
[ 0.460211@3] cvbs_out: register cvbs module server ok
[ 0.460221@3] vout: vout2: register server: cvbs_vout2_server
[ 0.460230@3] cvbs_out: register cvbs module vout2 server ok
[ 0.460243@3] cvbs_out: chrdev devno 264241152 for disp
[ 0.460775@3] cvbs_out: create cdev cvbs
[ 0.460792@3] cvbs_out: cvbsout_probe OK
[ 0.464194@3] rdma_probe,cpu_type:1, ver:0, len:8
[ 0.464215@3] vpu: switch_vpu_mem_pd: unsupport vpu mod: 57
[ 0.464534@3] rdma_register, rdma_table_addr f0aa5000 rdma_table_addr_phy 61040000 reg_buf ee280000
[ 0.464551@3] rdma_register success, handle 1 table_size 32768
[ 0.464562@3] set_rdma_handle video rdma handle = 1.
[ 0.464627@3] classs created ok
[ 0.464648@3] classs file created ok
[ 0.799942@4] vgaarb: loaded
[ 0.800785@4] SCSI subsystem initialized
[ 0.801397@2] usbcore: registered new interface driver usbfs
[ 0.801485@2] usbcore: registered new interface driver hub
[ 0.801650@2] usbcore: registered new device driver usb
[ 0.801804@2] Linux video capture interface: v2.00
[ 0.801986@2] pps_core: LinuxPPS API ver. 1 registered
[ 0.802001@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.802045@2] PTP clock support registered
[ 0.803306@7] secmon: reserve_mem_size:0x300000
[ 0.803393@7] secmon secmon: assigned reserved memory node linux,secmon
[ 0.803855@7] secmon: get page:ef097000, 5000
[ 0.803872@7] secmon: share in base: 0xc50fe000, share out base: 0xc50ff000
[ 0.803884@7] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.805918@7] fb: osd_init_module
[ 0.806638@7] fb: viu vsync irq: 43
[ 0.806698@7] 0x000000d8:Y=d8,U=0,V=0
[ 0.806711@7] 0x000000d9:Y=d9,U=0,V=0
[ 0.807365@7] fb: osd_rdma_init: rdma_table p=0x61048000,op=0x61048000 , v=0xf0ab0000
[ 0.807420@7] rdma_register, rdma_table_addr f0ab2000 rdma_table_addr_phy 61049000 reg_buf ee24e000
[ 0.807433@7] rdma_register success, handle 2 table_size 4096
[ 0.807444@7] fb: osd_rdma_init:osd reset rdma handle = 2.
[ 0.807493@7] rdma_register, rdma_table_addr f0ab4000 rdma_table_addr_phy 6104a000 reg_buf ee24f000
[ 0.807505@7] rdma_register success, handle 3 table_size 4096
[ 0.807517@7] fb: osd_rdma_init:osd rdma handle = 3.
[ 0.807541@7] fb: mem_size: 0x800000
[ 0.807551@7] fb: mem_size: 0x1851000
[ 0.807562@7] fb: mem_size: 0x100000
[ 0.807573@7] fb: mem_size: 0x0
[ 0.807583@7] fb: mem_size: 0x0
[ 0.807650@7] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
[ 0.807664@7] fb: reserved memory base:0x7f800000, size:800000
[ 0.808184@7] vout: error: invalid vinfo1. current vmode is not supported
[ 0.808200@7] fb: init fbdev bpp is:32
[ 0.809538@4] fb: set osd0 reverse as NONE
[ 0.809568@4] vout: error: invalid vinfo1. current vmode is not supported
[ 0.817345@4] fb: osd probe OK
[ 0.818129@4] hdmitx: system: amhdmitx_probe start
[ 0.818142@4] hdmitx: system: Ver: 20190815
[ 0.818189@4] hdmitx: system: hdmitx_device.chip_type : 4
[ 0.818258@4] hdmitx: system: not find match pwr-ctl
[ 0.818302@4] hdmitx: system: not find drm_amhdmitx
[ 0.818341@4] hdmitx: system: hpd irq = 51
[ 0.818358@4] hdmitx: system: vapb_clk failed to probe
[ 0.818372@4] hdmitx: system: vpu_clk failed to probe
[ 0.818385@4] hdmitx: system: hdcp22_tx_skp failed to probe
[ 0.818399@4] hdmitx: system: hdcp22_tx_esm failed to probe
[ 0.818412@4] hdmitx: system: venci_top_gate failed to probe
[ 0.818425@4] hdmitx: system: venci_0_gate failed to probe
[ 0.818439@4] hdmitx: system: venci_0_gate failed to probe
[ 0.819211@0] hdmitx: hdmitx20: Mapped PHY: 0xc1109800
[ 0.819243@0] hdmitx: hdmitx20: Mapped PHY: 0xc8834400
[ 0.819256@0] hdmitx: hdmitx20: Mapped PHY: 0xd0100000
[ 0.819274@0] hdmitx: hdmitx20: Mapped PHY: 0xc8100000
[ 0.819287@0] hdmitx: hdmitx20: Mapped PHY: 0xc883c000
[ 0.819299@0] hdmitx: hdmitx20: Mapped PHY: 0xc1104400
[ 0.819311@0] hdmitx: hdmitx20: Mapped PHY: 0xc883a000
[ 0.819323@0] hdmitx: hdmitx20: Mapped PHY: 0xda83a000
[ 0.819335@0] hdmitx: hdmitx20: Mapped PHY: 0xd0044000
[ 0.819353@0] hdmitx: hw: hdmitx_get_format:0x0
[ 0.819362@0] hdmitx: hw: P_HHI_HDMI_CLK_CNTL :0x100
[ 0.819371@0] hdmitx: hw: P_HHI_HDMI_PLL_CNTL :0xc000027b
[ 0.819628@0] hdmitx: hw: avmute set to 1
[ 0.819644@0] vout: vout1: register server: hdmitx_vout_server
[ 0.819654@0] vout: vout2: register server: hdmitx_vout2_server
[ 0.820782@0] hdmitx: system: fmt_attr default
[ 0.820924@0] hdmitx: system: amhdmitx_probe end
[ 0.822242@0] vout: create vout attribute OK
[ 0.822548@5] vout: vout_fops_create OK
[ 0.822567@5] vout: vout1: register server: nulldisp_vout_server
[ 0.822808@5] vout: tvout monitor interval:500(ms), timeout cnt:20
[ 0.822848@5] vout: error: no matched vout_init mode 444, force to invalid
[ 0.822867@5] vout: init mode invalid set ok
[ 0.822877@5] vout: aml_tvout_mode_monitor
[ 0.822898@5] vout: refresh_tvout_mode: mode chang to 576cvbs
[ 0.822909@5] vout: vmode set to 576cvbs
[ 0.822970@5] fb: current vmode=invalid, cmd: 0x10000
[ 0.822986@5] cvbs_out: mode is 1,sync_duration_den=1,sync_duration_num=50
[ 0.822998@5] cvbs_out: SET cvbs mode: 576cvbs
[ 0.823035@5]
[ 0.823035@5] vdac_enable: 0, module_sel:0x8, private_flag:0x0
[ 0.823052@5] cvbs_out: cvbs_cntl_output: 0: 0x0, 0x8
[ 0.823063@5] set_vmode_clk start
[ 0.823074@5] config eqafter gxl hdmi pll
[ 0.823139@5] cvbs_set_vid2_clk
[ 0.823182@5] set_vmode_clk DONE
[ 0.823203@5] cvbs_out: cvbs_performance_enhancement: vcbus reg 0x1bf0 = 0x00000009
[ 0.823215@5] cvbs_out: cvbs_performance_enhancement: vcbus reg 0x1b56 = 0x00000343
[ 0.823227@5] cvbs_out: cvbs_performance_enhancement: vcbus reg 0x1b12 = 0x00008080
[ 0.823239@5] cvbs_out: cvbs_performance_enhancement: vcbus reg 0x1b05 = 0x000000fd
[ 0.823251@5] cvbs_out: cvbs_performance_enhancement: vcbus reg 0x1c59 = 0x0000f752
[ 0.823268@5] vout: new mode 576cvbs set ok
[ 0.823279@5] fb: current vmode=576cvbs, cmd: 0x20000
[ 0.823299@5] fb: outputmode changed to 576cvbs, reset osd1, (0, 0, 719, 287) -> (0, 0, 719, 575)
[ 0.860015@5] fb: osd[1] enable: 1 (swapper/0)
[ 0.880005@5] vout: aml_vout_probe OK
[ 0.881459@1] chip type:0x22
[ 0.882163@1] MEMORY:[100000+7ff00000]
[ 0.882186@1] ramdump_probe, storage device:data
[ 0.882196@1] NO valid ramdump args:0 0
[ 0.882225@1] ramdump_probe, set sticky to 8800
[ 0.882882@1] Advanced Linux Sound Architecture Driver Initialized.
[ 0.883689@1] Bluetooth: Core ver 2.22
[ 0.883767@1] NET: Registered protocol family 31
[ 0.883777@1] Bluetooth: HCI device and connection manager initialized
[ 0.883795@1] Bluetooth: HCI socket layer initialized
[ 0.883810@1] Bluetooth: L2CAP socket layer initialized
[ 0.883848@1] Bluetooth: SCO socket layer initialized
[ 0.884500@1] NetLabel: Initializing
[ 0.884516@1] NetLabel: domain hash size = 128
[ 0.884525@1] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.884594@1] NetLabel: unlabeled traffic allowed by default
[ 0.888046@1] clocksource: Switched to clocksource arch_sys_counter
[ 0.967479@0] VFS: Disk quotas dquot_6.6.0
[ 0.967566@0] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.983083@0] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
[ 0.983534@0] jtag: select apao
[ 0.991707@0] NET: Registered protocol family 2
[ 0.992585@0] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.992666@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.992767@0] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.992850@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.992884@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.993082@0] NET: Registered protocol family 1
[ 0.994906@0] wifi: power_on_pin_OD = 0;
[ 0.994935@0] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
[ 0.995027@0] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
[ 0.995052@0] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
[ 0.995063@0] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
[ 0.995073@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem(): 100.10.545.3
[ 0.996134@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
[ 0.996156@0] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=487
[ 0.996167@0] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
[ 0.996179@0] aml_wifi wifi: [wifi_dev_probe] power_on_pin=486
[ 0.996190@0] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
[ 0.996556@3] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
[ 0.996715@3] aml_wifi wifi: [wifi_setup_dt] irq num is:(61)
[ 0.996728@3] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(487)
[ 0.996760@3] aml_wifi wifi: [wifi_setup_dt] power_on_pin(486)
[ 1.000661@3] enable_pmuserenr_all() start
[ 1.000694@3] enable_pmuserenr_all() end
[ 1.000721@3] hw perfevents: clusterb_enabled = 1
[ 1.000732@3] hw perfevents: cpumasks 0xf, 0xf0
[ 1.000774@3] hw perfevents: cluster A irq = 25
[ 1.000829@3] hw perfevents: cluster B irq = 26
[ 1.000924@3] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 1.006052@2] audit: initializing netlink subsys (disabled)
[ 1.006150@2] audit: type=2000 audit(0.948:1): initialized
[ 1.007548@3] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[ 1.019003@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.019384@3] exFAT: Version 1.2.9
[ 1.020931@3] Registering sdcardfs 0.1
[ 1.021274@3] ntfs: driver 2.1.32 [Flags: R/O].
[ 1.021672@3] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.022735@2] fuse init (API version 7.26)
[ 1.031051@0] NET: Registered protocol family 38
[ 1.031080@0] Key type asymmetric registered
[ 1.031092@0] Asymmetric key parser 'x509' registered
[ 1.031298@0] bounce: pool size: 64 pages
[ 1.031606@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 1.031629@0] io scheduler noop registered (default)
[ 1.031640@0] io scheduler deadline registered
[ 1.031687@0] io scheduler cfq registered
[ 1.045817@3] random: fast init done
[ 1.045887@3] random: crng init done
[ 1.064591@0] brd: module loaded
[ 1.064676@1] clear:2a800000, free:2a800000, tick:167550 us
[ 1.074531@0] loop: module loaded
[ 1.075911@1] zram: Added device: zram0
[ 1.076810@1] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.077898@1] libphy: Fixed MDIO Bus: probed
[ 1.078253@1] tun: Universal TUN/TAP device driver, 1.6
[ 1.078268@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.079618@2] ee eth reset:Addr = f0cfe408
[ 1.079931@4] meson6-dwmac c9410000.ethernet: no reset control found
[ 1.079952@4] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 1.079964@4] Ring mode enabled
[ 1.079976@4] DMA HW capability register supported
[ 1.079986@4] Normal descriptors
[ 1.079997@4] RX Checksum Offload Engine supported
[ 1.080008@4] COE Type 2
[ 1.080018@4] TX Checksum insertion supported
[ 1.080225@4] Wake-Up On Lan supported
[ 1.080312@4] Enable RX Mitigation via HW Watchdog Timer
[ 1.083419@1] libphy: stmmac: probed
[ 1.083437@1] eth%d: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
[ 1.085017@1] PPP generic driver version 2.4.2
[ 1.085350@2] PPP BSD Compression module registered
[ 1.085367@2] PPP Deflate Compression module registered
[ 1.085397@2] PPP MPPE Compression module registered
[ 1.085408@2] NET: Registered protocol family 24
[ 1.085525@2] usbcore: registered new interface driver asix
[ 1.085634@2] usbcore: registered new interface driver ax88179_178a
[ 1.085702@2] usbcore: registered new interface driver cdc_ether
[ 1.085778@2] usbcore: registered new interface driver net1080
[ 1.085845@2] usbcore: registered new interface driver cdc_subset
[ 1.085911@2] usbcore: registered new interface driver zaurus
[ 1.086000@2] usbcore: registered new interface driver cdc_ncm
[ 1.086850@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.086867@2] ehci-pci: EHCI PCI platform driver
[ 1.086945@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.087002@2] ohci-pci: OHCI PCI platform driver
[ 1.087746@2] usbcore: registered new interface driver cdc_acm
[ 1.087761@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.087847@2] usbcore: registered new interface driver usb-storage
[ 1.087972@2] usbcore: registered new interface driver usbserial
[ 1.088662@3] mousedev: PS/2 mouse device common for all mice
[ 1.089021@3] usbcore: registered new interface driver xpad
[ 1.089261@0] i2c /dev entries driver
[ 1.089798@1] IR NEC protocol handler initialized
[ 1.089816@1] IR RC5(x/sz) protocol handler initialized
[ 1.089826@1] IR RC6 protocol handler initialized
[ 1.089835@1] IR JVC protocol handler initialized
[ 1.089845@1] IR Sony protocol handler initialized
[ 1.089854@1] IR SANYO protocol handler initialized
[ 1.089863@1] IR Sharp protocol handler initialized
[ 1.089873@1] IR MCE Keyboard/mouse protocol handler initialized
[ 1.089882@1] IR XMP protocol handler initialized
[ 1.090006@1] usbcore: registered new interface driver uvcvideo
[ 1.090017@1] USB Video Class driver (1.1.1)
[ 1.090096@1] usbcore: registered new interface driver cx231xx
[ 1.090109@1] md: linear personality registered for level -1
[ 1.090867@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.091128@4] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
[ 1.091150@4] Bluetooth: HCI UART driver ver 2.3
[ 1.091165@4] Bluetooth: HCI UART protocol H4 registered
[ 1.092243@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 1.094968@4] cpu cpu4: bL_cpufreq_init: CPU 4 initialized
[ 1.095078@4] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 1.095318@4] cpuidle: enable-method property 'psci' found operations
[ 1.095514@4] cpuidle: enable-method property 'psci' found operations
[ 1.095687@4] cpuidle: enable-method property 'psci' found operations
[ 1.095869@4] cpuidle: enable-method property 'psci' found operations
[ 1.096203@4] cpuidle: enable-method property 'psci' found operations
[ 1.096393@4] cpuidle: enable-method property 'psci' found operations
[ 1.096568@4] cpuidle: enable-method property 'psci' found operations
[ 1.096741@4] cpuidle: enable-method property 'psci' found operations
[ 1.098665@7] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.099404@3] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.099896@0] usbcore: registered new interface driver usbhid
[ 1.099912@0] usbhid: USB HID core driver
[ 1.100294@1] ashmem: initialized
[ 1.101427@3] c81004c0.serial: clock gate not found
[ 1.101508@3] meson_uart c81004c0.serial: ==uart0 reg addr = f0e2e4c0
[ 1.101564@3] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 29, base_baud = 1500000) is a meson_uart
[ 1.101586@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
[ 1.844082@5]
[ 1.844082@5] vdac_enable: 1, module_sel:0x8, private_flag:0x0
[ 1.844091@5] cvbs_out: cvbs_cntl_output: 1: 0xb0001, 0x0
[ 3.433754@3] console [ttyS0] enabled
[ 3.437956@0] c11084c0.serial: clock gate not found
[ 3.442376@0] meson_uart c11084c0.serial: ==uart1 reg addr = f0e414c0
[ 3.448650@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 30, base_baud = 10416666) is a meson_uart
[ 3.458561@1] c11084dc.serial: clock gate not found
[ 3.462881@1] meson_uart c11084dc.serial: ==uart2 reg addr = f0e434dc
[ 3.469243@1] c11084dc.serial: ttyS2 at MMIO 0xc11084dc (irq = 31, base_baud = 10416666) is a meson_uart
[ 3.480075@2] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xf0e66000
[ 3.488757@2] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
[ 3.495180@2] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xf0e6a080
[ 3.506653@2] Error: Driver 'meson_reset' is already registered, aborting...
[ 3.512837@2] aml_dma c883e000.aml_dma: Aml dma
[ 3.518479@0] aml_aes_dma c883e000.aml_dma:aml_aes: Aml AES_dma
[ 3.523615@0] aml_tdes_dma c883e000.aml_dma:aml_tdes: Aml TDES_dma
[ 3.529317@0] meson-remote: Driver init
[ 3.532477@0] meson-remote: remote_probe
[ 3.536145@0] meson-remote c8100580.rc: protocol = 0x1
[ 3.541307@0] meson-remote c8100580.rc: don't find the node <led_blink>
[ 3.547758@0] meson-remote c8100580.rc: led_blink = 0
[ 3.552761@0] meson-remote c8100580.rc: don't find the node <led_blink_frq>
[ 3.559668@0] meson-remote c8100580.rc: led_blink_frq = 100
[ 3.565362@0] meson-remote c8100580.rc: platform_data irq =36
[ 3.571007@0] meson-remote c8100580.rc: custom_number = 3
[ 3.576321@0] meson-remote c8100580.rc: ptable->map_size = 44
[ 3.582042@0] meson-remote c8100580.rc: ptable->custom_name = amlogic-remote-1
[ 3.589158@0] meson-remote c8100580.rc: ptable->custom_code = 0xfb04
[ 3.595463@0] meson-remote c8100580.rc: ptable->release_delay = 80
[ 3.601631@0] meson-remote c8100580.rc: ptable->map_size = 53
[ 3.607271@0] meson-remote c8100580.rc: ptable->custom_name = amlogic-remote-2
[ 3.614429@0] meson-remote c8100580.rc: ptable->custom_code = 0xfe01
[ 3.620755@0] meson-remote c8100580.rc: ptable->release_delay = 80
[ 3.626869@0] meson-remote c8100580.rc: ptable->map_size = 17
[ 3.632542@0] meson-remote c8100580.rc: ptable->custom_name = amlogic-remote-3
[ 3.639700@0] meson-remote c8100580.rc: ptable->custom_code = 0xbd02
[ 3.646025@0] meson-remote c8100580.rc: ptable->release_delay = 80
[ 3.652125@0] meson-remote c8100580.rc: default protocol = 0x1 and id = 0
[ 3.658848@0] meson-remote c8100580.rc: reg=0x0, val=0x1f40190
[ 3.664653@0] meson-remote c8100580.rc: reg=0x4, val=0x12c00c8
[ 3.670404@0] meson-remote c8100580.rc: reg=0x8, val=0x960050
[ 3.676097@0] meson-remote c8100580.rc: reg=0xc, val=0x480028
[ 3.681817@0] meson-remote c8100580.rc: reg=0x10, val=0x70fa0013
[ 3.687740@0] meson-remote c8100580.rc: reg=0x18, val=0x8616800
[ 3.693605@0] meson-remote c8100580.rc: reg=0x1c, val=0x9f00
[ 3.699218@0] meson-remote c8100580.rc: reg=0x20, val=0x0
[ 3.704588@0] meson-remote c8100580.rc: reg=0x24, val=0x0
[ 3.709907@0] meson-remote c8100580.rc: reg=0x28, val=0x0
[ 3.715938@1] input: aml_keypad as /devices/platform/c8100580.rc/input/input0
[ 3.723113@3] meson-remote: IR XMP protocol handler initialized
[ 3.728657@3] efusekeynum: 4
[ 3.731040@3] efusekeyname: mac offset: 0 size: 6
[ 3.737460@3] efusekeyname: mac_bt offset: 6 size: 6
[ 3.743816@3] efusekeyname: mac_wifi offset: 12 size: 6
[ 3.750205@3] efusekeyname: usid offset: 18 size: 16
[ 3.756877@0] efuse efuse: probe OK!
[ 3.764466@1] ion_dev ion_dev: assigned reserved memory node linux,ion-dev
[ 3.767647@3] ge2d: ge2d_init_module
[ 3.770881@3] ge2d: ge2d_dev major:236
[ 3.774516@0] ge2d: clock source clk_ge2d_gate d299f400
[ 3.779535@0] ge2d: clock clk_ge2d source d299f640
[ 3.784181@0] ge2d: clock source clk_vapb_0 d299f500
[ 3.789000@0] ge2d: ge2d init clock is 400000000 HZ, VPU clock is 666666666 HZ
[ 3.796235@0] ge2d: ge2d clock is 400 MHZ
[ 3.800181@0] ge2d: reserved mem init failed
[ 3.804352@0] ge2d: ge2d: pdev=ee1f2e00, irq=54, clk=d299f400
[ 3.810091@0] ge2d: ge2d start monitor
[ 3.813924@2] ge2d: ge2d workqueue monitor start
[ 3.814428@1] [tsync_pcr_init]init success.
[ 3.814762@1] amvideom vsync irq: 43
[ 3.814796@1] create_ge2d_work_queue video task ok
[ 3.815803@3] hdmitx: hdcp: hdmitx_hdcp_init
[ 3.816743@3] DI: di_module_init ok.
[ 3.816990@3] DI: di_probe:
[ 3.816996@3] DI: di_probe: major 511
[ 3.817318@0] deinterlace deinterlace: assigned reserved memory node linux,di_cma
[ 3.817324@0] di:flag_cma=1
[ 3.817327@0] DI: CMA size 0x2000000.
[ 3.817351@0] pre_irq:57
[ 3.817363@0] post_irq:58
[ 3.817366@0] DI: di_probe allocate rdma channel 0.
[ 3.817384@0] 0x000000dd:Y=dd,U=0,V=0
[ 3.817387@0] 0x000000de:Y=de,U=0,V=0
[ 3.817389@0] 0x000000df:Y=df,U=0,V=0
[ 3.817392@0] 0x000000e0:Y=e0,U=0,V=0
[ 3.817394@0] 0x000000e1:Y=e1,U=0,V=0
[ 3.817397@0] 0x000000e2:Y=e2,U=0,V=0
[ 3.817399@0] 0x000000e3:Y=e3,U=0,V=0
[ 3.817402@0] 0x000000f0:Y=f0,U=0,V=0
[ 3.817404@0] 0x000000f1:Y=f1,U=0,V=0
[ 3.817407@0] 0x000000f2:Y=f2,U=0,V=0
[ 3.817416@0] 0x000000f3:Y=f3,U=0,V=0
[ 3.817418@0] 0x000000f4:Y=f4,U=0,V=0
[ 3.817420@0] 0x000000f5:Y=f5,U=0,V=0
[ 3.817423@0] 0x000000f6:Y=f6,U=0,V=0
[ 3.817425@0] 0x000000f7:Y=f7,U=0,V=0
[ 3.817428@0] 0x000000f8:Y=f8,U=0,V=0
[ 3.817436@0] 0x000000f9:Y=f9,U=0,V=0
[ 3.817439@0] 0x000000fa:Y=fa,U=0,V=0
[ 3.817441@0] 0x000000fb:Y=fb,U=0,V=0
[ 3.817444@0] 0x000000fc:Y=fc,U=0,V=0
[ 3.817446@0] 0x000000fd:Y=fd,U=0,V=0
[ 3.817449@0] 0x000000fe:Y=fe,U=0,V=0
[ 3.817454@0] 0x000000ff:Y=ff,U=0,V=0
[ 3.817457@0] 0x0000003a:Y=3a,U=0,V=0
[ 3.817459@0] 0x0000003b:Y=3b,U=0,V=0
[ 3.817462@0] DI: support multi decoding 255~58~59.
[ 3.817625@0] DI: di_probe:Di use HRTIMER
[ 3.817809@0] DI: di_probe:ok
[ 3.817900@0] dim:dim_module_init
[ 3.818288@0] dim:dim_module_init finish
[ 3.818292@0] dil:dil_init.
[ 3.818545@0] dil:dil_init ok.
[ 3.818590@0] vdin_drv_init: major 510
[ 3.822566@0] rdma_register, rdma_table_addr f0e74000 rdma_table_addr_phy 6104b000 reg_buf ee339400
[ 3.822570@0] rdma_register success, handle 4 table_size 512
[ 3.822573@0] vdin_drv_probe:vdin.0 rdma hanld 4.
[ 3.822865@1]
[ 3.822865@1] vdin memory resource undefined!!
[ 3.822870@1] vdin0 cma_mem_size = 16 MB
[ 3.822875@1] vdin0 irq: 59 rdma irq: 2
[ 3.822879@1] set_canvas_manual = 0
[ 3.822920@1] get fclk_div5 err
[ 3.822924@1] vdin_drv_probe: vdin cannot get msr clk !!!
[ 3.822955@1] vdin_drv_probe: driver initialized ok
[ 3.823105@1] rdma_register, rdma_table_addr f0e76000 rdma_table_addr_phy 6104c000 reg_buf ee1b3c00
[ 3.823108@1] rdma_register success, handle 5 table_size 512
[ 3.823111@1] vdin_drv_probe:vdin.1 rdma hanld 5.
[ 3.823441@3] vdin vdin1: assigned reserved memory node linux,vdin1_cma
[ 3.823443@3]
[ 3.823443@3] vdin memory resource done.
[ 3.823448@3] vdin1 cma_mem_size = 16 MB
[ 3.823453@3] vdin1 irq: 60 rdma irq: 4
[ 3.823458@3] set_canvas_manual = 0
[ 3.823497@3] get fclk_div5 err
[ 3.823501@3] vdin_drv_probe: vdin cannot get msr clk !!!
[ 3.823511@3] vdin_debugfs_init only support debug vdin0 1
[ 3.823513@3] vdin_drv_probe: driver initialized ok
[ 3.823585@3] vdin_drv_init: vdin driver init done
[ 3.823589@3] [viuin..]viuin_init_module viuin module init
[ 3.823996@3] [viuin..]viuin_probe probe ok.
[ 3.824885@3] [RX]-hdmirx: hdmirx_init.
[ 3.824889@3] ESM HLD: Initializing...
[ 3.826047@0] amvdec_csi module: init.
[ 3.826054@0] amvdec_csi_init_module:major 508
[ 3.826337@0] amvdec_csi module: init. ok
[ 3.826344@0] amlvid:info: amlvideo_init called
[ 3.826345@0] amlvid:info: amlvideo_create_instance called
[ 3.826349@0] amlvid:info: v4l2_dev.name=:amlvideo-000
[ 3.826619@1] amlvideo-000: V4L2 device registered as video10
[ 3.826622@1] amlvid:info: amlvideo_create_instance called
[ 3.826640@1] amlvid:info: v4l2_dev.name=:amlvideo-001
[ 3.826854@3] amlvideo-001: V4L2 device registered as video23
[ 3.827175@3] amlvideo2 probe called
[ 3.827477@0] amlvideo2_create_node
[ 3.827477@0] amlvideo2: V4L2 device registered as video11
[ 3.827523@0] amlvideo2 probe called
[ 3.827835@1] amlvideo2_create_node
[ 3.827836@1] amlvideo2: V4L2 device registered as video12
[ 3.827918@1] PPMGRDRV: warn: ppmgr module init func called
[ 3.828268@1] PPMGRDRV: info: ppmgr_driver_probe called
[ 3.828328@1] PPMGRDRV: info: ppmgr_dev major:507
[ 3.828739@3] ppmgr: probe of ppmgr failed with error -22
[ 3.829673@1] ionvideo-000: V4L2 device registered as video13
[ 3.829878@3] ionvideo-001: V4L2 device registered as video14
[ 3.830077@0] ionvideo-002: V4L2 device registered as video15
[ 3.830268@1] ionvideo-003: V4L2 device registered as video16
[ 3.830477@3] ionvideo-004: V4L2 device registered as video17
[ 3.830701@0] ionvideo-005: V4L2 device registered as video18
[ 3.830922@1] ionvideo-006: V4L2 device registered as video19
[ 3.831117@3] ionvideo-007: V4L2 device registered as video20
[ 3.831306@0] ionvideo-008: V4L2 device registered as video21
[ 3.831309@0] ionvid: info: Video Technology Magazine Ion Video
[ 3.831312@0] ionvid: info: Capture Board ver 1.0 successfully loaded
[ 3.831715@0] picdec: picdec_driver_probe called.
[ 3.832118@1] picdec: probe of picdec failed with error -22
[ 3.832463@3] videosync_create_instance dev_s d2b51a00,dev_s->dev d2b65800
[ 3.832467@3] videosync_create_instance reg videosync.0
[ 3.832586@3] aml_vecm_init:module init
[ 3.832590@1] videosync_thread started
[ 3.833040@3]
[ 3.833040@3] VECM probe start
[ 3.833521@0] Can't find detect_colorbar.
[ 3.833524@0] Can't find detect_face.
[ 3.833526@0] Can't find detect_corn.
[ 3.833529@0] Can't find wb_sel.
[ 3.833541@0] amlogic, vecm
[ 3.833541@0] vlock dt support: 1
[ 3.833543@0] vlock dt new_fsm: 0
[ 3.833544@0] vlock dt hwver: 0
[ 3.833546@0] vlock dt phlock_en: 0
[ 3.833549@0] Can't find vlock_en.
[ 3.833553@0] Can't find vlock_mode.
[ 3.833555@0] Can't find vlock_pll_m_limit.
[ 3.833558@0] Can't find vlock_line_limit.
[ 3.833589@0] param_config vlock_en:1 md=0x4
[ 3.833594@0] vlock: maxLine 524,maxPixel 1715
[ 3.833597@0] vlock_status_init vlock_en:1
[ 3.833599@0] pixel_probe: vpp probe func error!
[ 3.833607@0] aml_vecm_probe: ok
[ 3.833675@0] amdolby_vision_init:module init
[ 3.834194@0]
[ 3.834194@0] amdolby_vision probe start & ver: 20181220
[ 3.834202@0]
[ 3.834202@0] cpu_id=0 tvmode=0
[ 3.834481@1] dolby_vision_init_receiver(dvel)
[ 3.834490@1] dolby_vision_init_receiver: dvel
[ 3.834746@1] amdolby_vision_probe: ok
[ 3.834825@1] prime_sl module init
[ 3.835546@1] vm_init .
[ 3.836874@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 3.838150@1] meson-mmc: >>>>>>>>hostbase f0f9e000, dmode
[ 3.887665@0] meson-mmc: meson_mmc_probe() : success!
[ 3.890638@3] meson-mmc: >>>>>>>>hostbase f0fa8000, dmode
[ 3.890695@3] meson-mmc: gpio_cd = 1c1
[ 3.933097@3] meson-mmc: meson_mmc_probe() : success!
[ 3.934608@3] meson-mmc: >>>>>>>>hostbase f0fb2000, dmode
[ 3.972085@3] meson-mmc: meson_mmc_probe() : success!
[ 3.972494@3] amlogic mtd driver init
[ 3.973454@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 3.973700@3] input: aml_vkeypad as /devices/platform/rtc/input/input1
[ 3.974997@1] cectx c810023c.aocec: cec driver date:2020/04/09:fix cec a recursive call
[ 3.974997@1]
[ 3.975338@0] cectx c810023c.aocec: compatible:amlogic, amlogic-aocec
[ 3.975342@0] cectx c810023c.aocec: cecb_ver:0x0
[ 3.975345@0] cectx c810023c.aocec: line_reg:0x0
[ 3.975349@0] cectx c810023c.aocec: line_bit:0x8
[ 3.975352@0] cectx c810023c.aocec: ee_to_ao:0x0
[ 3.975552@0] input: cec_input as /devices/virtual/input/input2
[ 3.975735@3] cectx c810023c.aocec: not find 'port_num'
[ 3.975740@3] cectx c810023c.aocec: using cec:0
[ 3.975748@3] cectx c810023c.aocec: get sleep state error!
[ 3.975781@3] cectx c810023c.aocec: no hdmirx regs
[ 3.975785@3] cectx c810023c.aocec: no hhi regs
[ 3.975788@3] cectx c810023c.aocec: no periphs regs
[ 3.975795@3] cectx c810023c.aocec: not find 'output'
[ 3.978994@4] irq cnt:1, a:52, b52
[ 3.979788@0] cectx c810023c.aocec: wakeup_reason:0x0
[ 3.979892@0] cectx c810023c.aocec: cev val1: 0x0;val2: 0x0
[ 3.979898@0] cectx c810023c.aocec: aml_cec_probe success end
[ 3.980492@0] unifykey: storage in base: 0xc5000000
[ 3.980495@0] unifykey: storage out base: 0xc5040000
[ 3.980497@0] unifykey: storage block base: 0xc5080000
[ 3.980499@0] unifykey: probe done!
[ 3.981201@0] unifykey: no efuse-version set, use default value: -1
[ 3.981204@0] unifykey: key unify config unifykey-num is 17
[ 3.981341@0] unifykey: key unify fact unifykey-num is 17
[ 3.981350@0] unifykey: unifykey_devno: 1f400000
[ 3.981640@1] unifykey: device unifykeys created ok
[ 3.981699@1] unifykey: aml_unifykeys_init done!
[ 3.982055@1] audio_dsp: [dsp]register dsp to char divece(257)
[ 3.982324@3] amaudio: amaudio: driver amaudio init!
[ 3.982911@3] amaudio: amaudio_init - amaudio: driver amaudio succuess!
[ 3.983905@0] amlkaraoke init success!
[ 3.984281@0] sysled: module init
[ 3.984708@0] meson_wdt c11098d0.watchdog: start watchdog
[ 3.984712@0] meson_wdt c11098d0.watchdog: creat work queue for watch dog
[ 3.985087@3] meson_wdt c11098d0.watchdog: AML Watchdog Timer probed done
[ 3.986037@0] amlogic rfkill init
[ 3.986256@0] enter bt_probe of_node
[ 3.986285@0] not get gpio_en
[ 3.986287@0] not get gpio_hostwake
[ 3.986289@0] not get gpio_btwakeup
[ 3.986297@0] power on valid level is high
[ 3.986297@0] bt: power_on_pin_OD = 0;
[ 3.986300@0] bt: power_off_flag = 1;
[ 3.986303@0] dis power down = 0;
[ 4.012224@0] request_irq error ret=-22
[ 4.012278@0] dev_pm_set_wake_irq failed: -22
[ 4.015029@4] dmc_monitor_probe
[ 4.015394@4] page_trace_module_init, create sysfs failed
[ 4.017154@1] atv_demod: aml_atvdemod_init: OK, atv demod version: V2.15.
[ 4.018162@3] usbcore: registered new interface driver snd-usb-audio
[ 4.019701@3] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
[ 4.019730@3] T9015 acodec used by meson, tdmout:0
[ 4.022097@3] snd_i2s_dai: clock source gate top_glue : ee19be40
[ 4.022131@3] snd_i2s_dai: clock source gate aud_buf : ee19bec0
[ 4.022164@3] snd_i2s_dai: clock source gate i2s_out : ee19bf40
[ 4.022202@3] snd_i2s_dai: clock source gate amclk_measure : ee19bc80
[ 4.022244@3] snd_i2s_dai: clock source gate aififo2 : ee19bbc0
[ 4.022292@3] snd_i2s_dai: clock source gate aud_mixer : ee19b9c0
[ 4.022346@3] snd_i2s_dai: clock source gate mixer_reg : ee19b440
[ 4.022408@3] snd_i2s_dai: clock source gate adc : edddf280
[ 4.022470@3] snd_i2s_dai: clock source gate top_level : edddf440
[ 4.022538@3] snd_i2s_dai: clock source gate aoclk : edddf840
[ 4.022611@3] snd_i2s_dai: clock source gate aud_in : edddf340
[ 4.022619@3] snd_i2s_dai: ignore aud_buf/vdac_clk gate
[ 4.022861@3] aml-i2s-dai I2S: I2S Mic is in platform!
[ 4.023687@3] snd_pcm_dai: pcm mode detection =1
[ 4.023930@3] snd_pcm_dai: tdm config: 0x0, 0x0, 0, 0
[ 4.024680@3] snd_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
[ 4.024826@3] snd_spdif_dai: set normal 512 fs /4 fs
[ 4.024829@3] snd_spdif_dai: set 958 audio clk div 4
[ 4.024841@3] hdmitx: audio: aout notify format CT_PCM
[ 4.025330@3] snd_dmic d0042000.snd_dmic: Dmic probe!
[ 4.025414@3] meson-gxl-pinctrl pinctrl@4b0: pin GPIODV_24 already requested by c11084dc.serial; cannot claim for d0042000.snd_dmic
[ 4.025419@3] meson-gxl-pinctrl pinctrl@4b0: pin-73 (d0042000.snd_dmic) status -22
[ 4.025424@3] meson-gxl-pinctrl pinctrl@4b0: could not request pin 73 (GPIODV_24) from group dmic_in_dv24 on device pinctrl-meson
[ 4.025428@3] snd_dmic d0042000.snd_dmic: Error applying setting, reverse things back
[ 4.025434@3] snd_dmic d0042000.snd_dmic: pinctrls error!
[ 4.025451@3] snd_dmic: probe of d0042000.snd_dmic failed with error -22
[ 4.025927@3] spdif-dit spdif_codec: audio_spdif_out_mute can't get pinctrl
[ 4.025992@3] spdif-dit spdif_codec: audio_spdif_in_mute can't get pinctrl
[ 4.025997@3] spdif-dit spdif_codec: audio_spdif_in can't get pinctrl
[ 4.026614@3] snd_card_meson: aml_card_dai_parse_of codec_node count:1
[ 4.026714@3] snd_card_meson: aml_card_dai_parse_of codec_node count:1
[ 4.026837@3] snd_card_meson: aml_card_dai_parse_of codec_node count:1
[ 4.043439@1] meson-aml-mmc d0074000.emmc: divider requested rate 52000000 != actual rate 50000000: ret=0
[ 4.043544@1] meson-aml-mmc d0074000.emmc: divider requested rate 52000000 != actual rate 50000000: ret=0
[ 4.043695@1] meson-aml-mmc d0074000.emmc: divider requested rate 52000000 != actual rate 50000000: ret=0
[ 4.043700@1] meson-mmc: emmc: try set sd/emmc to DDR mode
[ 4.043774@1] emmc: new DDR MMC card at address 0001
[ 4.048613@1] emmc: clock 50000000, 8-bit-bus-width
[ 4.048613@1]
[ 4.048614@1] mmcblk0: emmc:0001 MAG2GA 14.6 GiB
[ 4.048951@1] mmcblk0boot0: emmc:0001 MAG2GA partition 1 2.00 MiB
[ 4.049246@1] mmcblk0boot1: emmc:0001 MAG2GA partition 2 2.00 MiB
[ 4.049532@1] mmcblk0rpmb: emmc:0001 MAG2GA partition 3 128 KiB
[ 4.050501@0] meson-mmc: emmc: warning... data crc, vstat:0xa1ff20ff, virqc:3fff
[ 4.050502@0] meson-mmc: @ cmd 18 arg 0 with d2b5c52c; stop 0, status 4
[ 4.050505@0] meson-mmc: emmc: err: wait for irq service, bus_fsm:0x8
[ 4.050524@3] meson-mmc: meson_mmc_irq_thread 2779 emmc: cmd:18
[ 4.050529@3] meson-mmc: meson_mmc_irq_thread() 2795: set 1st retry!
[ 4.050533@3] meson-mmc: retry cmd 18 the 10-th time(s)
[ 4.050536@3] meson-mmc: emmc: retry, rx_phase 0 -> 1
[ 4.050553@0] meson-mmc: emmc: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 4.050579@1] emmc: req failed (CMD18): -84, retrying...
[ 4.051070@1] meson-mmc: Enter aml_emmc_partition_ops
[ 4.051503@1] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
[ 4.051505@1] meson-mmc: add_emmc_partition
[ 4.051752@1] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
[ 4.051993@1] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
[ 4.052353@1] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000046000000
[ 4.052590@1] meson-mmc: [mmcblk0p04] env offset 0x00004d400000, size 0x000000800000
[ 4.052801@1] meson-mmc: [mmcblk0p05] logo offset 0x00004e400000, size 0x000000800000
[ 4.053030@1] meson-mmc: [mmcblk0p06] recovery offset 0x00004f400000, size 0x000001800000
[ 4.053239@1] meson-mmc: [mmcblk0p07] misc offset 0x000051400000, size 0x000000800000
[ 4.053465@1] meson-mmc: [mmcblk0p08] dtbo offset 0x000052400000, size 0x000000800000
[ 4.053689@1] meson-mmc: [mmcblk0p09] cri_data offset 0x000053400000, size 0x000000800000
[ 4.053899@1] meson-mmc: [mmcblk0p10] param offset 0x000054400000, size 0x000001000000
[ 4.054127@1] meson-mmc: [mmcblk0p11] boot offset 0x000055c00000, size 0x000001000000
[ 4.054337@1] meson-mmc: [mmcblk0p12] rsv offset 0x000057400000, size 0x000001000000
[ 4.054550@1] meson-mmc: [mmcblk0p13] metadata offset 0x000058c00000, size 0x000001000000
[ 4.054775@1] meson-mmc: [mmcblk0p14] vbmeta offset 0x00005a400000, size 0x000000200000
[ 4.054992@1] meson-mmc: [mmcblk0p15] tee offset 0x00005ae00000, size 0x000002000000
[ 4.055237@1] meson-mmc: [mmcblk0p16] vendor offset 0x00005d600000, size 0x000014000000
[ 4.055448@1] meson-mmc: [mmcblk0p17] odm offset 0x000071e00000, size 0x000008000000
[ 4.055657@1] meson-mmc: [mmcblk0p18] system offset 0x00007a600000, size 0x000062c00000
[ 4.055883@1] meson-mmc: [mmcblk0p19] product offset 0x0000dda00000, size 0x000008000000
[ 4.056147@1] meson-mmc: [mmcblk0p20] data offset 0x0000e6200000, size 0x0002bdc00000
[ 4.056167@1] card key: card_blk_probe.
[ 4.056172@1] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
[ 4.056176@1] emmc key: emmc_key_init:205 ok.
[ 4.068935@1] meson-mmc: amlmmc_dtb_init: register dtb chardev
[ 4.068936@1] meson-mmc: calc 184c5e2, store 184c5e2
[ 4.076596@1] meson-mmc: calc 184c5e2, store 184c5e2
[ 4.076599@1] meson-mmc: total valid 2
[ 4.076932@1] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
[ 4.076932@1] meson-mmc: Exit aml_emmc_partition_ops OK.
[ 4.132199@3] meson-mmc: card IN
[ 4.236348@1] snd_card_meson: headphone detection disable=1
[ 4.236354@1] snd_card_meson: no spk event delay time set
[ 4.236641@3] meson-mmc: normal card in
[ 4.239072@1] aml_meson_snd_card aml_sound_meson: T9015-audio-hifi <-> I2S mapping ok
[ 4.240395@1] aml_meson_snd_card aml_sound_meson: dit-hifi <-> SPDIF mapping ok
[ 4.240566@1] snd_pcm: enter aml_pcm_new dai->name: PCM dai->id: 0
[ 4.241392@1] aml_meson_snd_card aml_sound_meson: pcm2bt-pcm <-> PCM mapping ok
[ 4.241415@1] aml_meson_snd_card aml_sound_meson: ASoC: no source widget found for LOUTL
[ 4.241420@1] aml_meson_snd_card aml_sound_meson: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
[ 4.241424@1] aml_meson_snd_card aml_sound_meson: ASoC: no source widget found for LOUTR
[ 4.241428@1] aml_meson_snd_card aml_sound_meson: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
[ 4.241596@1] aml-spdif-dai SPDIF: ASoC: Failed to create S/PDIF Playback debugfs file
[ 4.241601@1] aml-spdif-dai SPDIF: ASoC: Failed to create S/PDIF Capture debugfs file
[ 4.243269@1] snd_card_meson: enable i2sclk in startup
[ 4.248585@3] Register vad
[ 4.248672@1] meson-gxl-pinctrl pinctrl@4b0: pin GPIOH_6 already requested by jtag; cannot claim for aml_sound_meson
[ 4.248677@1] meson-gxl-pinctrl pinctrl@4b0: pin-22 (aml_sound_meson) status -22
[ 4.248682@1] meson-gxl-pinctrl pinctrl@4b0: could not request pin 22 (GPIOH_6) from group i2s_am_clk on device pinctrl-meson
[ 4.248686@1] aml_meson_snd_card aml_sound_meson: Error applying setting, reverse things back
[ 4.248695@1] snd_card_meson: aml_pinmux_init,aml_pinmux_init error!
[ 4.249179@3] GACT probability NOT on
[ 4.249195@3] Mirror/redirect action on
[ 4.249203@3] u32 classifier
[ 4.249204@3] Actions configured
[ 4.249210@3] Netfilter messages via NETLINK v0.30.
[ 4.249503@3] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.249814@3] ctnetlink v0.93: registering with nfnetlink.
[ 4.250618@1] xt_time: kernel timezone is -0000
[ 4.250716@1] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 4.251282@1] IPv4 over IPsec tunneling driver
[ 4.260786@1] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.261151@1] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 4.272131@1] Initializing XFRM netlink socket
[ 4.272692@1] NET: Registered protocol family 10
[ 4.274123@2] mip6: Mobile IPv6
[ 4.274148@2] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.284341@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.285746@2] NET: Registered protocol family 17
[ 4.285771@2] NET: Registered protocol family 15
[ 4.285808@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.285955@1] Bluetooth: RFCOMM TTY layer initialized
[ 4.285966@1] Bluetooth: RFCOMM socket layer initialized
[ 4.285988@1] Bluetooth: RFCOMM ver 1.11
[ 4.285997@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.285999@1] Bluetooth: BNEP filters: protocol multicast
[ 4.286008@1] Bluetooth: BNEP socket layer initialized
[ 4.286011@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.286018@1] Bluetooth: HIDP socket layer initialized
[ 4.286059@1] l2tp_core: L2TP core driver, V2.0
[ 4.286070@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 4.286072@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 4.286095@1] l2tp_netlink: L2TP netlink interface
[ 4.286133@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 4.286150@1] l2tp_debugfs: L2TP debugfs support
[ 4.286153@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 4.286203@1] NET: Registered protocol family 35
[ 4.286259@1] Key type dns_resolver registered
[ 4.288612@1] Registering SWP/SWPB emulation handler
[ 4.289405@1] registered taskstats version 1
[ 4.299191@2] dwc3 c9000000.dwc3: Configuration mismatch. dr_mode forced to host
[ 4.606697@3] sd: new high speed SDHC card at address 0002
[ 4.607509@3] sd: clock 50000000, 4-bit-bus-width
[ 4.607509@3]
[ 4.607509@3] mmcblk1: sd:0002 NCard 30.0 GiB
[ 4.611585@3] mmcblk1: p1
[ 4.612281@3] meson-mmc: Enter aml_emmc_partition_ops
[ 4.803100@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.803122@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 4.803609@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x02010010
[ 4.803662@2] xhci-hcd xhci-hcd.0.auto: irq 49, io mem 0xc9000000
[ 4.804660@3] hub 1-0:1.0: USB hub found
[ 4.804697@3] hub 1-0:1.0: 3 ports detected
[ 4.805233@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.805247@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 4.805352@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.806190@1] hub 2-0:1.0: USB hub found
[ 4.806223@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 4.806306@1] usb usb2: Unsupported the hub
[ 4.806777@1] aml_vrtc rtc: setting system clock to 2017-01-01 00:00:07 UTC (1483228807)
[ 4.807304@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
[ 4.907716@3] dwc_otg: Core Release: 3.10a
[ 4.907722@3] dwc_otg: Setting default values for core params
[ 4.907736@3] dwc_otg: curmode: 0, host_only: 0
[ 4.920181@3] dwc_otg: Using Buffer DMA mode
[ 4.920186@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 4.920190@3] dwc_otg: Working on port type = SLAVE
[ 4.920195@3] dwc_otg: Dedicated Tx FIFOs mode
[ 4.933986@2] cpucore_cooling_register, max_cpu_core_num:4
[ 4.934140@2] cpucore_cooling_register, max_cpu_core_num:4
[ 4.953161@2] gxbb_pm: enter meson_pm_probe!
[ 4.953182@2] gxbb_pm: system suspend level: 1
[ 4.953204@2] no vddio3v3_en pin
[ 4.953205@2] pm-meson aml_pm: Can't get switch_clk81
[ 4.953243@2] gxbb_pm: meson_pm_probe done
[ 4.953757@2] ALSA device list:
[ 4.953761@2] #0: AML-MESONAUDIO
[ 5.847226@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[ 5.956085@4] prepare_namespace() wait 79
[ 5.956197@4] md: Waiting for all devices to be available before autodetect
[ 5.961462@4] md: If you don't use raid, use raid=noautodetect
[ 5.968810@5] md: Autodetecting RAID arrays.
[ 5.971383@5] md: Scanned 0 and added 0 devices.
[ 5.976054@5] md: autorun ...
[ 5.978926@0] md: ... autorun DONE.
[ 5.983322@1] EXT4-fs (mmcblk0p18): couldn't mount as ext3 due to feature incompatibilities
[ 5.991147@1] EXT4-fs (mmcblk0p18): couldn't mount as ext2 due to feature incompatibilities
[ 6.003254@1] EXT4-fs (mmcblk0p18): mounted filesystem without journal. Opts: (null)
[ 6.006645@1] VFS: Mounted root (ext4 filesystem) readonly on device 179:18.
[ 6.016618@1] devtmpfs: mounted
[ 6.017798@1] Freeing unused kernel memory: 1024K
[ 6.052949@1] init: init first stage started!
[ 6.054072@1] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 6.064237@1] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
[ 6.111990@1] EXT4-fs (mmcblk0p17): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
[ 6.116552@1] init: [libfs_mgr]__mount(source=/dev/block/odm,target=/odm,type=ext4)=0: Success
[ 6.126226@1] EXT4-fs (mmcblk0p19): VFS: Can't find ext4 filesystem
[ 6.131733@1] init: [libfs_mgr]__mount(source=/dev/block/product,target=/product,type=ext4)=-1: Invalid argument
[ 6.141612@1] init: Failed to mount '/product': Invalid argument
[ 6.147438@1] init: Failed to mount required partitions early ...
[ 6.153209@1] init: Reboot start, reason: reboot, rebootTarget: bootloader
[ 6.160045@1] init: unhandled page fault (11) at 0x00000014, code 0x017
[ 6.166539@1] pgd = edc18000
[ 6.169421@1] [00000014] *pgd=60f99835
[ 6.173080@1] reg value pfn reg value pfn
[ 6.178948@1] r0 : 00000000 -------- r1 : b3e89ba0 60502
[ 6.184911@1] r2 : bb8f11f0 6041f r3 : bb8f11ec 6041f
[ 6.190849@1] r4 : bb8f1248 6041f r5 : 00000000 --------
[ 6.196814@1] r6 : bb8f124c 6041f r7 : 0000000b --------
[ 6.202751@1] r8 : 00014111 60449 r9 : bb8f12c8 6041f
[ 6.208713@1] r10: bb8f13a8 6041f fp : 00000000 --------
[ 6.214653@1] ip : 00000063 -------- sp : bb8f1198 6041f
[ 6.220618@1] lr : 000eb4ab 6048a pc : 000eb264 6048a
[ 6.226559@1] CPU: 1 PID: 1 Comm: init Not tainted 4.9.113 #1
[ 6.232258@1] Hardware name: Generic DT based system
[ 6.237178@1] task: c01c0000 task.stack: bc000000
[ 6.241837@1] PC is at 0xeb264
[ 6.244850@1] LR is at 0xeb4ab
[ 6.247860@1] vma for eb264:
[ 6.250719@1] 00008000-0015c000 r-xp 00000000 b3:12 15 /init
[ 6.256311@1] vma for eb4ab:
[ 6.259158@1] 00008000-0015c000 r-xp 00000000 b3:12 15 /init
[ 6.264765@1] pc : [<000eb264>] lr : [<000eb4ab>] psr: 000f0030
[ 6.264765@1] sp : bb8f1198 ip : 00000063 fp : 00000000
[ 6.276512@1] r10: bb8f13a8 r9 : bb8f12c8 r8 : 00014111
[ 6.281852@1] r7 : 0000000b r6 : bb8f124c r5 : 00000000 r4 : bb8f1248
[ 6.288494@1] r3 : bb8f11ec r2 : bb8f11f0 r1 : b3e89ba0 r0 : 00000000
[ 6.295136@1] Flags: nzcv IRQs on FIQs on Mode USER_32 ISA Thumb Segment user
[ 6.302648@1] Control: 10c5383d Table: 2dc1806a DAC: 00000055
[ 6.308504@1]
[ 6.308504@1] PC: 0xeb1e4:
[ 6.312817@1] b1e4 bfc8d008 28001e77 1c74bfb8 dae642a7 36fff04f b0014630 83f0e8bd 43f0e92d
[ 6.321084@1] b204 4605b081 69284688 1e4f5829 db1c2f00 24004428 0904f100 eb001938 104670d0
[ 6.329364@1] b224 0026f859 68a9b120 d2014281 e0002000 46414428 fae0f003 d0082800 1e77bfc8
[ 6.337644@1] b244 bfb82800 42a71c74 f04fdae6 463036ff e8bdb001 e92d83f0 b08b4ff0 93024683
[ 6.345924@1] b264 0014f8db 2800910a d0069201 1008f8db d2024281 25002600 eb0be002 465e0500
[ 6.354204@1] b284 3afff04f 34fff04f b00cf8cd 9806e007 0508eb06 30019c05 e9dd900a 9f0aba03
[ 6.362484@1] b2a4 4638212e fe32f002 68289006 e9d04430 1c419002 4604bf18 0001f109 46389009
[ 6.370764@1] b2c4 fd84f003 46809909 68ec4620 bf182900 2c0046ca 900546d1 5407e9cd 6928d024
[ 6.379045@1]
[ 6.379045@1] LR: 0xeb42b:
[ 6.383370@1] b428 e021d3e8 b1329a01 688019f0 bf181c41 f8c24682 9a02a000 b1fa9807 44306980
[ 6.391636@1] b448 0024f850 68c04430 bf181c41 f8c24681 b00b9000 8ff0e8bd 0102e9d4 bf181c4a
[ 6.399916@1] b468 1c414689 4682bf18 1001e9dd bf182900 a000f8c1 bf182800 9000f8c0 e8bdb00b
[ 6.408209@1] b488 00008ff0 b084b570 48184605 4616461c aa024478 6800ab01 90036800 f7ff4628
[ 6.416489@1] b4a8 b15efed8 1c419802 68e9d006 eb014429 68400080 e0004428 60302000 9801b15c
[ 6.424769@1] b4c8 d0061c41 44296929 0080eb01 44286840 2000e000 48066020 44789903 68006800
[ 6.433036@1] b4e8 bf041a40 bd70b004 f86cf00c 000764fc 000764b2 44794901 b802f000 0006255a
[ 6.441316@1] b508 41f0e92d 4604b09e 44784828 68006800 4608901d 2108f44f f83ef006 4605a902
[ 6.449596@1] b528 ea98f00c 3ffff1b0 9808dd09 9809b938 bf042800 0018f89d 0f12f010 4628d00f
[ 6.457878@1]
[ 6.457878@1] SP: 0xbb8f1118:
[ 6.462461@1] 1118 bb8f11a8 bb8f1170 b3f00040 00000029 00000005 0011f20d 00000001 00000001
[ 6.470728@1] 1138 00000000 00005000 00000032 00000000 ffffffff 00000000 00169854 00005000
[ 6.479008@1] 1158 b3e80440 b3e86008 b3f00040 b3f00650 b3e86008 b3e89ba0 b3f00650 b3e86008
[ 6.487288@1] 1178 b3e89ba0 b3e80000 b3f00040 00121867 00000000 00000040 b3e89ba0 b3e86008
[ 6.495568@1] 1198 00000000 00000000 bb8f11ec 00110271 00000009 b3e89ba0 b3e86008 b3e9f040
[ 6.503848@1] 11b8 00000040 0000001f b3e89ba0 bb8f1248 00000000 bb8f124c 0000000b 00014111
[ 6.512140@1] 11d8 bb8f12c8 bb8f13a8 bb8f12b8 000eb4ab b3e9f040 000c9a09 00000032 46ea0dc8
[ 6.520422@1] 11f8 bb8f1341 bb8f12a8 bb8f1340 00014e01 00000000 b3e950c4 0000006b 00000010
[ 6.528701@1]
[ 6.528701@1] IP: 0xffffffe3:
[ 6.533272@1] ffe0 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.541539@1] 0000 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.549819@1] 0020 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.558099@1] 0040 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.566379@1] 0060 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.574659@1] 0080 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.582939@1] 00a0 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.591219@1] 00c0 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.599499@1] 00e0 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.607780@1]
[ 6.607780@1] FP: 0xffffff80:
[ 6.612363@1] ff80 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.620643@1] ffa0 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.628923@1] ffc0 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.637191@1] ffe0 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.645470@1] 0000 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.653750@1] 0020 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.662030@1] 0040 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.670310@1] 0060 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.678591@1]
[ 6.678591@1] R0: 0xffffff80:
[ 6.683175@1] ff80 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.691442@1] ffa0 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.699722@1] ffc0 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.708002@1] ffe0 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.716056@0] lcd vlock_en=1, vlock_mode=0x4
[ 6.720521@0] 0000 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.728800@0] 0020 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.737068@0] 0040 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.745348@0] 0060 ******** ******** ******** ******** ******** ******** ******** ********
[ 6.753629@1]
[ 6.753629@1] R1: 0xb3e89b20:
[ 6.758210@1] 9b20 00000000 00000000 b3e89180 00000000 5359530c 00474f4c 00000000 00000022
[ 6.766479@1] 9b40 00000000 00000000 b3e89a20 00000000 4b415714 4c415f45 004d5241 00000023
[ 6.774759@1] 9b60 00000000 00000000 b3e890a0 00000000 00000011 0000000d b3e881f0 00000024
[ 6.783039@1] 9b80 00000000 00000000 b3e89aa0 00000000 44554114 525f5449 00444145 00000025
[ 6.791319@1] 9ba0 73726570 2e747369 2e737973 746f6f62 6165722e 006e6f73 746f6f62 0072202c
[ 6.799599@1] 9bc0 72646e61 2e64696f 6c646968 7361622e 00000065 00000000 00000000 00000000
[ 6.807879@1] 9be0 72646e61 2e64696f 6c646968 6e616d2e 72656761 493a3a00 65736142 00000000
[ 6.816173@1] 9c00 6c696146 74206465 6f6d206f 20746e75 72702f27 6375646f 203a2774 00766e49
[ 6.824450@1]
[ 6.824450@1] R2: 0xbb8f1170:
[ 6.829023@1] 1170 b3f00650 b3e86008 b3e89ba0 b3e80000 b3f00040 00121867 00000000 00000040
[ 6.837291@1] 1190 b3e89ba0 b3e86008 00000000 00000000 bb8f11ec 00110271 00000009 b3e89ba0
[ 6.845570@1] 11b0 b3e86008 b3e9f040 00000040 0000001f b3e89ba0 bb8f1248 00000000 bb8f124c
[ 6.853850@1] 11d0 0000000b 00014111 bb8f12c8 bb8f13a8 bb8f12b8 000eb4ab b3e9f040 000c9a09
[ 6.862130@1] 11f0 00000032 46ea0dc8 bb8f1341 bb8f12a8 bb8f1340 00014e01 00000000 b3e950c4
[ 6.870410@1] 1210 0000006b 00000010 00000000 b3e86008 00000001 00120737 00000000 b3e86008
[ 6.878690@1] 1230 00000000 00000010 b3e86000 b3e86008 00000001 00014111 00000000 00000000
[ 6.886970@1] 1250 00000000 0010c4cb 00000000 bb8f1374 bb8f1340 0010c4cb 00000000 00110271
[ 6.895251@1]
[ 6.895251@1] R3: 0xbb8f116c:
[ 6.899832@1] 116c b3e89ba0 b3f00650 b3e86008 b3e89ba0 b3e80000 b3f00040 00121867 00000000
[ 6.908114@1] 118c 00000040 b3e89ba0 b3e86008 00000000 00000000 bb8f11ec 00110271 00000009
[ 6.916394@1] 11ac b3e89ba0 b3e86008 b3e9f040 00000040 0000001f b3e89ba0 bb8f1248 00000000
[ 6.924674@1] 11cc bb8f124c 0000000b 00014111 bb8f12c8 bb8f13a8 bb8f12b8 000eb4ab b3e9f040
[ 6.932957@1] 11ec 000c9a09 00000032 46ea0dc8 bb8f1341 bb8f12a8 bb8f1340 00014e01 00000000
[ 6.941221@1] 120c b3e950c4 0000006b 00000010 00000000 b3e86008 00000001 00120737 00000000
[ 6.949502@1] 122c b3e86008 00000000 00000010 b3e86000 b3e86008 00000001 00014111 00000000
[ 6.957781@1] 124c 00000000 00000000 0010c4cb 00000000 bb8f1374 bb8f1340 0010c4cb 00000000
[ 6.966062@1]
[ 6.966062@1] R4: 0xbb8f11c8:
[ 6.970646@1] 11c8 00000000 bb8f124c 0000000b 00014111 bb8f12c8 bb8f13a8 bb8f12b8 000eb4ab
[ 6.978913@1] 11e8 b3e9f040 000c9a09 00000032 46ea0dc8 bb8f1341 bb8f12a8 bb8f1340 00014e01
[ 6.987192@1] 1208 00000000 b3e950c4 0000006b 00000010 00000000 b3e86008 00000001 00120737
[ 6.995473@1] 1228 00000000 b3e86008 00000000 00000010 b3e86000 b3e86008 00000001 00014111
[ 7.003753@1] 1248 00000000 00000000 00000000 0010c4cb 00000000 bb8f1374 bb8f1340 0010c4cb
[ 7.012042@1] 1268 00000000 00110271 46ea0dc8 bb8f12b8 00000010 b3e88010 0000000b 00014111
[ 7.020325@1] 1288 bb8f13a8 bb8f1340 00000000 000141f9 bb8f12b8 00000020 b3e86000 b3e86008
[ 7.028604@1] 12a8 00000011 0000000b b3e886a0 00000000 00000000 00000000 00000000 b3e875b8
[ 7.036887@1]
[ 7.036887@1] R5: 0xffffff80:
[ 7.041457@1] ff80 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.049724@1] ffa0 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.058004@1] ffc0 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.066284@1] ffe0 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.074564@1] 0000 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.082844@1] 0020 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.091124@1] 0040 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.099404@1] 0060 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.107685@1]
[ 7.107685@1] R6: 0xbb8f11cc:
[ 7.112269@1] 11cc bb8f124c 0000000b 00014111 bb8f12c8 bb8f13a8 bb8f12b8 000eb4ab b3e9f040
[ 7.120545@1] 11ec 000c9a09 00000032 46ea0dc8 bb8f1341 bb8f12a8 bb8f1340 00014e01 00000000
[ 7.128828@1] 120c b3e950c4 0000006b 00000010 00000000 b3e86008 00000001 00120737 00000000
[ 7.137095@1] 122c b3e86008 00000000 00000010 b3e86000 b3e86008 00000001 00014111 00000000
[ 7.145375@1] 124c 00000000 00000000 0010c4cb 00000000 bb8f1374 bb8f1340 0010c4cb 00000000
[ 7.153655@1] 126c 00110271 46ea0dc8 bb8f12b8 00000010 b3e88010 0000000b 00014111 bb8f13a8
[ 7.161935@1] 128c bb8f1340 00000000 000141f9 bb8f12b8 00000020 b3e86000 b3e86008 00000011
[ 7.170215@1] 12ac 0000000b b3e886a0 00000000 00000000 00000000 00000000 b3e875b8 00000001
[ 7.178496@1]
[ 7.178496@1] R7: 0xffffff8b:
[ 7.183079@1] ff88 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.191347@1] ffa8 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.199627@1] ffc8 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.207907@1] ffe8 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.216199@1] 0008 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.224479@1] 0028 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.232756@1] 0048 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.241027@1] 0068 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.249307@1] 0088 ******** ******** ******** ******** ******** ******** ******** ********
[ 7.257588@1]
[ 7.257588@1] R8: 0x14091:
[ 7.261912@1] 4090 4620030c fc18f7ff f1a8e022 e9cd000c f1040300 f104010c f1040218 46200324
[ 7.270179@1] 40b0 fce8f7ff 42b4e014 9905d212 0b00edd1 90086888 0b06edcd 0b00edd5 608868a8
[ 7.278459@1] 40d0 0b00edc1 0b06eddd 60a89808 0b00edc5 49072001 44799a0a 68096809 bf041a89
[ 7.286739@1] 40f0 e8bdb00b f0e38ff0 bf00fa69 0014db18 0014d8ae 4604b510 fa58f0d7 bd104620
[ 7.295019@1] 4110 4ff0e92d 4682b091 46894891 44784991 68004479 90106800 f0754650 b130fd45
[ 7.303299@1] 4130 fedcf074 f3402804 2610809e f89ae070 f8da1000 f0110004 bf080f01 281c0848
[ 7.311579@1] 4150 4b85d10b 9000201c 447b4650 f04f2100 f0b532ff 2800fe14 4880d067 44784980
[ 7.319859@1] 4170 edd04479 68800b00 900e6809 edcd2000 e9cd0b0c 900a0008 e9cd688e 780a0005
[ 7.328152@1] 4190 f0129004 bf080f01 46301c4e fe18f0da f1174607 f0800f10 2f0b80d8 0078d208
[ 7.336433@1]
[ 7.336433@1] R9: 0xbb8f1248:
[ 7.341003@1] 1248 00000000 00000000 00000000 0010c4cb 00000000 bb8f1374 bb8f1340 0010c4cb
[ 7.349270@1] 1268 00000000 00110271 46ea0dc8 bb8f12b8 00000010 b3e88010 0000000b 00014111
[ 7.357550@1] 1288 bb8f13a8 bb8f1340 00000000 000141f9 bb8f12b8 00000020 b3e86000 b3e86008
[ 7.365830@1] 12a8 00000011 0000000b b3e886a0 00000000 00000000 00000000 00000000 b3e875b8
[ 7.374110@1] 12c8 00000001 00000000 00000000 00164c80 46ea0dc8 00000006 bb8f13f9 bb8f13a9
[ 7.382390@1] 12e8 00000000 00014111 dead0003 bb8f1340 00000000 0001853d 00000002 00000000
[ 7.390670@1] 1308 ffffffff b3e9f000 00000040 0000001f b3e89ba0 00110513 bb8f13ec 00000040
[ 7.398950@1] 1328 0000001f 00000000 dead0003 46ea0dc8 b3e95024 0000001f 00000021 00000017
[ 7.407231@1]
[ 7.407231@1] R10: 0xbb8f1328:
[ 7.411901@1] 1328 0000001f 00000000 dead0003 46ea0dc8 b3e95024 0000001f 00000021 00000017
[ 7.420181@1] 1348 b3e89ba0 00000000 b3e95024 0000001f b3e89bbf b3e89ba0 00000000 b3e95024
[ 7.428460@1] 1368 00000021 00000030 00000000 b3e88690 b3e8869c b3e8869c 6b6b60f8 00000001
[ 7.436740@1] 1388 46ea0dc8 bb8f13d0 b3e8f600 000887f9 00000000 b3e8f600 b3e8f600 00011ead
[ 7.445010@1] 13a8 6265720c 00746f6f 00000000 000893cb 00000000 00000000 bb8f13d0 b3e8f600
[ 7.453288@1] 13c8 b3e8f600 bb8f1420 00000000 bb8f1580 00000002 00000000 00000000 00011dd5
[ 7.461568@1] 13e8 46ea0dc8 6f6f6214 616f6c74 00726564 6265720c 00746f6f 00000000 46ea0dc8
[ 7.469848@1] 1408 bb8f1580 00089199 00000000 b3e8f600 b3e95038 b3e875b8 00000031 0000002d
[ 7.478133@1] CPU: 1 PID: 1 Comm: init Not tainted 4.9.113 #1
[ 7.483821@1] Hardware name: Generic DT based system
[ 7.488754@1] [bc001bac+ 16][<c020e3a8>] show_stack+0x20/0x24
[ 7.494522@1] [bc001bd4+ 40][<c05dff94>] dump_stack+0xb8/0xf4
[ 7.500301@1] [bc001be4+ 16][<c0209f10>] show_regs+0x1c/0x20
[ 7.505993@1] [bc001c94+ 176][<c021a348>] __do_user_fault+0x100/0x10c
[ 7.512374@1] [bc001ce4+ 80][<c021a53c>] do_page_fault+0x1e8/0x3b4
[ 7.518583@1] [bc001d94+ 176][<c020133c>] do_DataAbort+0x4c/0xd0
[ 7.524535@1] [00000000+ 0][<c020f544>] __dabt_usr+0x44/0x60
[ 7.530444@1] init: Reboot ending, jumping to kernel
[ 8.535314@1] hdmitx: hw: avmute set to 2
[ 8.635488@4] meson_wdt c11098d0.watchdog: reboot_notify: disable watchdog (event = 1)
[ 8.661116@4] snd_card_meson: enter aml_suspend_pre
[ 8.661151@4] snd_card_meson: no audio pin_ctrl to suspend
[ 8.665826@4] snd_card_meson: no audio pin_ctrl to shutdown
[ 8.671387@4] aml_T9015_audio_remove!
[ 8.675258@4] amvecm: shutdown module
[ 8.678979@3] VDIN(1) decode has stopped.
[ 8.682594@3] vdin_drv_shutdown ok.
[ 8.685998@3] VDIN(0) decode has stopped.
[ 8.689987@3] vdin_drv_shutdown ok.
[ 8.693420@3] di pre hrtimer canel 1.
[ 8.697044@3] [DI] shutdown done.
[ 8.700854@3] vout: aml_vout_shutdown
[ 8.703949@3] fb: osd_shutdown
[ 8.707023@3] amvdac_drv_shutdown: shutdown module, private_flag:0x8
[ 8.713697@0] reboot: Restarting system with command 'bootloader'
[ 8.719295@0] reboot reason 7
bl31 reboot reason: 0xd
bl31 reboot reason: 0x7
system cmd 1.
GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 154860
BL2 Built : 15:21:18, Aug 28 2019. gxl g1bf2b53 - luan.yuan@droid15-sz
set vdd cpu_a to 1120 mv
set vdd cpu_b to 1050 mv
set vddee to 1000 mv
Board ID = 1
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 912MHz
bist_test rank: 0 1c 0a 2f 2a 14 41 18 03 2e 34 1e 4b 1a 06 2f 2d 18 42 1b 03 33 2a 13 42 693 rank: 1 1b 08 2f 2a 13 42 15 01 2a 34 1f 49 16 04 28 2d 18 42 1a 04 30 2a 13 42 693 - PASS
Rank0: 1024MB(auto)-2T-13
Rank1: 1024MB(auto)-2T-13
AddrBus test pass!
eMMC boot @ 0
sw8 s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0
Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0
Load bl33 from eMMC, src: 0x0004c200, des: 0x01000000, size: 0x0007cc00, part: 0
NOTICE: BL3-1: v1.0(release):53f813e
NOTICE: BL3-1: Built : 15:51:23, May 22 2019
NOTICE: BL3-1: GXM normal boot!
NOTICE: BL3-1: BL33 decompress pass
mpu_config_enable:system pre init ok
dmc sec lock
[Image: gxl_v1.1.3390-6ac5299 2019-09-26 14:09:24 luan.yuan@droid15-sz]
OPS=0x82
wdt: reset registers!
22 0b 82 00 ae f6 51 47 0e 8a 0b 5c 1b f8 72 07
[0.622695 Inits done]
secure task start!
high task start!
low task start!
ERROR: Error initializing runtime service opteed_fast
U-Boot 2015.01-g4752efbb90 (Jul 01 2020 - 12:34:43)
DRAM: 2 GiB
Relocation Offset is: 76e84000
register usb cfg[0][1] = 0000000077f50a80
[CANVAS]canvas init
boot_device_flag : 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=7, system=5.0ns
reset failed
get_chip_type and ret:fffffffe
get_chip_type and ret:fffffffe
chip detect failed and ret:fffffffe
nandphy_init failed and ret=0xfffffff1
MMC: aml_priv->desc_buf = 0x0000000073e846b0
aml_priv->desc_buf = 0x0000000073e869f0
SDIO Port B: 0, SDIO Port C: 1
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 40000000
[mmc_startup] mmc refix success
init_part() 297: PART_TYPE_AML
[mmc_init] mmc init success
Amlogic multi-dtb tool
Single dtb detected
start dts,buffer=0000000073e89240,dt_addr=0000000073e89240
get_partition_from_dts() 91: ret 0
Amlogic multi-dtb tool
Single dtb detected
parts: 17
00: logo 0000000000800000 1
01: recovery 0000000001800000 1
02: misc 0000000000800000 1
03: dtbo 0000000000800000 1
04: cri_data 0000000000800000 2
05: param 0000000001000000 2
06: boot 0000000001000000 1
set has_boot_slot = 0
07: rsv 0000000001000000 1
08: metadata 0000000001000000 1
09: vbmeta 0000000000200000 1
10: tee 0000000002000000 1
11: vendor 0000000014000000 1
12: odm 0000000008000000 1
13: system 0000000062c00000 1
14: product 0000000008000000 1
15: cache 0000000046000000 2
16: data ffffffffffffffff 4
init_part() 297: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
mmc env offset: 0x4d400000
In: serial
Out: serial
Err: serial
reboot_mode=bootloader
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-3477: calc 184c5e2, store 184c5e2
_verify_dtb_checksum()-3477: calc 184c5e2, store 184c5e2
dtb_read()-3694: total valid 2
update_old_dtb()-3675: do nothing
Amlogic multi-dtb tool
Single dtb detected
vpu: clk_level in dts: 7
vpu: vpu_power_on
vpu: set clk: 666667000Hz, readback: 666666667Hz(0x300)
vpu: vpu_module_init_config
vpp: vpp_init
cvbs: cpuid:0x22
hpd_state=0
vpp: vpp_matrix_update: 2
cvbs performance type = 6, table = 0
cvbs_config_hdmipll_gxl
cvbs_set_vid2_clk
vpp: vpp_pq_load pq val error !!!
Net: dwmac.c9410000amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
MACADDR:02:0e:47:51:f6:ae(from chipid)
Warning: dwmac.c9410000 MAC addresses don't match:
Address in SROM is f2:07:5a:a2:46:bd
Address in environment is 02:0e:47:51:f6:ae
CONFIG_AVB2: null
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
wipe_data=successful
wipe_cache=successful
upgrade_step=2
reboot_mode:::: bootloader
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[region_code] not programed yet
[OSD]load fb addr from dts:/meson-fb
[OSD]fb_addr for logo: 0x7f800000
[OSD]load fb addr from dts:/meson-fb
[OSD]fb_addr for logo: 0x7f800000
[OSD]VPP_OFIFO_SIZE:0xfff00fff
[CANVAS]addr=0x7f800000 width=3840, height=2160
[OSD]osd_hw.free_dst_data: 0,719,0,575
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
[KM]Error:f[key_manage_query_size]L515:key[region_code] not programed yet
gpio: pin GPIOAO_2 (gpio 102) value is 1
Command: bcb uboot-command
Start read misc partition datas!
BCB hasn't any datas,exit!
gxm_q201_v1#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment