tissot init.class_main.sh

gistfile1.txt

#! /vendor/bin/sh

# Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of The Linux Foundation nor
#       the names of its contributors may be used to endorse or promote
#       products derived from this software without specific prior written
#       permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

#
# start ril-daemon only for targets on which radio is present
#
baseband=`getprop ro.baseband`
sgltecsfb=`getprop persist.vendor.radio.sglte_csfb`
datamode=`getprop persist.vendor.data.mode`
rild_status=`getprop init.svc.ril-daemon`
vendor_rild_status=`getprop init.svc.vendor.ril-daemon`

case "$baseband" in
    "apq" | "sda" | "qcs" )
    setprop ro.vendor.radio.noril yes
    if [ -n "$rild_status" ] || [ -n "$vendor_rild_status" ]; then
      stop ril-daemon
      stop vendor.ril-daemon
      start vendor.ipacm
    fi
esac

case "$baseband" in
    "msm" | "csfb" | "svlte2a" | "mdm" | "mdm2" | "sglte" | "sglte2" | "dsda2" | "unknown" | "dsda3")
    start vendor.qmuxd
esac

case "$baseband" in
    "msm" | "csfb" | "svlte2a" | "mdm" | "mdm2" | "sglte" | "sglte2" | "dsda2" | "unknown" | "dsda3" | "sdm" | "sdx" | "sm6")

    if [ -f /vendor/firmware_mnt/verinfo/ver_info.txt ]; then
        modem=`cat /vendor/firmware_mnt/verinfo/ver_info.txt |
                sed -n 's/^[^:]*modem[^:]*:[[:blank:]]*//p' |
                sed 's/.*MPSS.\(.*\)/\1/g' | cut -d \. -f 1`
        # Check if this is AT 3.0 or below. If so, start ril-daemon 
        if [ "$modem" = "AT" ]; then
            version=`cat /vendor/firmware_mnt/verinfo/ver_info.txt |
                    sed -n 's/^[^:]*modem[^:]*:[[:blank:]]*//p' |
                    sed 's/.*AT.\(.*\)/\1/g' | cut -d \- -f 1`
            if [ ! -z $version ]; then
                if [ "$version" \< "3.1" ]; then
                    # For OTA targets, ril-daemon will be defined and for new vendor.ril-daemon
                    # To keep this script agnostic,start both of them as only valid one will start.
                    start ril-daemon
                    start vendor.ril-daemon
                fi
            fi
        # For older than TA 3.0 start ril-daemon
        elif [ "$modem" = "TA" ]; then
            version=`cat /vendor/firmware_mnt/verinfo/ver_info.txt |
                    sed -n 's/^[^:]*modem[^:]*:[[:blank:]]*//p' |
                    sed 's/.*TA.\(.*\)/\1/g' | cut -d \- -f 1`
            if [ ! -z $version ]; then
                if [ "$version" \< "3.0" ]; then
                    # For OTA targets, ril-daemon will be defined and for new vendor.ril-daemon
                    # To keep this script agnostic,start both of them as only valid one will start.
                    start ril-daemon
                    start vendor.ril-daemon
                fi
            fi
        # For older than JO 3.2 start ril-daemon
        elif [ "$modem" = "JO" ]; then
            version=`cat /vendor/firmware_mnt/verinfo/ver_info.txt |
                    sed -n 's/^[^:]*modem[^:]*:[[:blank:]]*//p' |
                    sed 's/.*JO.\(.*\)/\1/g' | cut -d \- -f 1`
            if [ ! -z $version ]; then
                if [ "$version" \< "3.2" ]; then
                    # For OTA targets, ril-daemon will be defined and for new vendor.ril-daemon
                    # To keep this script agnostic,start both of them as only valid one will start.
                    start ril-daemon
                    start vendor.ril-daemon
                fi
            fi
        else
            start ril-daemon
            start vendor.ril-daemon
        fi
    fi

    # Get ril-daemon status again to ensure that we have latest info
    rild_status=`getprop init.svc.ril-daemon`
    vendor_rild_status=`getprop init.svc.vendor.ril-daemon`

    if [[ -z "$rild_status" || "$rild_status" = "stopped" ]] && [[ -z "$vendor_rild_status" || "$vendor_rild_status" = "stopped" ]]; then
      start vendor.qcrild
    fi
    start vendor.ipacm-diag
    start vendor.ipacm
    case "$baseband" in
        "svlte2a" | "csfb")
          start qmiproxy
        ;;
        "sglte" | "sglte2" )
          if [ "x$sgltecsfb" != "xtrue" ]; then
              start qmiproxy
          else
              setprop persist.vendor.radio.voice.modem.index 0
          fi
        ;;
    esac

    multisim=`getprop persist.radio.multisim.config`

    if [ "$multisim" = "dsds" ] || [ "$multisim" = "dsda" ]; then
        if [[ -z "$rild_status" || "$rild_status" = "stopped" ]] && [[ -z "$vendor_rild_status" || "$vendor_rild_status" = "stopped" ]]; then
          start vendor.qcrild2
        else
          start vendor.ril-daemon2
        fi
    elif [ "$multisim" = "tsts" ]; then
        if [[ -z "$rild_status" || "$rild_status" = "stopped" ]] && [[ -z "$vendor_rild_status" || "$vendor_rild_status" = "stopped" ]]; then
          start vendor.qcrild2
          start vendor.qcrild3
        else
          start vendor.ril-daemon2
          start vendor.ril-daemon3
        fi
    fi

    case "$datamode" in
        "tethered")
            start vendor.dataqti
            start vendor.dataadpl
            start vendor.port-bridge
            ;;
        "concurrent")
            start vendor.dataqti
            start vendor.dataadpl
            start vendor.netmgrd
            start vendor.port-bridge
            ;;
        *)
            start vendor.netmgrd
            ;;
    esac
esac

#
# Allow persistent faking of bms
# User needs to set fake bms charge in persist.vendor.bms.fake_batt_capacity
#
fake_batt_capacity=`getprop persist.vendor.bms.fake_batt_capacity`
case "$fake_batt_capacity" in
    "") ;; #Do nothing here
    * )
    echo "$fake_batt_capacity" > /sys/class/power_supply/battery/capacity
    ;;
esac