Skip to content

Instantly share code, notes, and snippets.

@ItachiSan

ItachiSan/battery_charge.txt

Created February 3, 2014 11:03
Show Gist options
  • Save ItachiSan/8782049 to your computer and use it in GitHub Desktop.
Save ItachiSan/8782049 to your computer and use it in GitHub Desktop.
Download ZIP
Charger kmsg
Raw
battery_charge.txt
<6>[ 0.000000] Booting Linux on physical CPU 0
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.4.70-cyanogenmod (ency@antergos_E1-570G) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 3 11:52:23 CET 2014
<4>[ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
<4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: QCT MSM7x27a FFA
<4>[ 0.000000] Jena H/W revision : 0x03
<6>[ 0.000000] memory pool 3 (start 29700000 size 3600000) initialized
<6>[ 0.000000] Initialized persistent memory from 01ce0000-01d5ffff
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<1>[ 0.000000] Initialized strongly ordered page successfully
<3>[ 0.000000] smem_find(137, 80): wrong size 64
<3>[ 0.000000] smem_find(137, 72): wrong size 64
<6>[ 0.000000] socinfo_init: v4, id=99, ver=1.1, raw_id=1540, raw_ver=1, hw_plat=2, hw_plat_ver=65536
<6>[ 0.000000] L310 cache controller enabled
<6>[ 0.000000] l2x0: 8 ways, CACHE_ID 0x410054c7, AUX_CTRL 0x00540000, Cache size: 262144 B
<7>[ 0.000000] On node 0 totalpages: 103680
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0906680, node_mem_map c1059800
<7>[ 0.000000] Normal zone: 1609 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 102071 pages, LIFO batch:31
<6>[ 0.000000] allocating 1843200 bytes at c16b0000 (18b0000 physical) for fb
<6>[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1875000 s15104 r8192 d13568 u36864
<7>[ 0.000000] pcpu-alloc: s15104 r8192 d13568 u36864 alloc=9*4096
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 102071
<5>[ 0.000000] Kernel command line: console=null androidboot.hardware=qcom hw=3 androidboot.emmc=true androidboot.serialno=efaf215b androidboot.boot_pause=batt androidboot.baseband=msm
<6>[ 0.000000] boot_mode_boot[BATT]charging_boot: 1
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 254MB 151MB = 405MB total
<5>[ 0.000000] Memory: 395948k/395948k available, 74068k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] vmalloc : 0xdd000000 - 0xff000000 ( 544 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xdcb00000 ( 459 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc0841a38 (8423 kB)
<5>[ 0.000000] .init : 0xc0842000 - 0xc0878b00 ( 219 kB)
<5>[ 0.000000] .data : 0xc087a000 - 0xc0908d60 ( 572 kB)
<5>[ 0.000000] .bss : 0xc0908d84 - 0xc0b2c4b0 (2190 kB)
<6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:645
<6>[ 0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000369] Calibrating delay loop... 298.59 BogoMIPS (lpj=1492992)
<6>[ 0.070136] pid_max: default: 32768 minimum: 301
<6>[ 0.070586] Security Framework initialized
<6>[ 0.070619] SELinux: Initializing.
<7>[ 0.070728] SELinux: Starting in permissive mode
<6>[ 0.070934] Mount-cache hash table entries: 512
<6>[ 0.073331] Initializing cgroup subsys cpuacct
<6>[ 0.073356] Initializing cgroup subsys devices
<6>[ 0.073374] Initializing cgroup subsys freezer
<6>[ 0.073458] CPU: Testing write buffer coherency: ok
<6>[ 0.074096] CPU0: thread -1, cpu 0, socket -1, mpidr c0000000
<6>[ 0.074208] Setting up static identity map for 0x7c2c60 - 0x7c2cc4
<6>[ 0.075939] Brought up 1 CPUs
<6>[ 0.075964] SMP: Total of 1 processors activated (298.59 BogoMIPS).
<6>[ 0.095716] dummy:
<6>[ 0.096468] NET: Registered protocol family 16
<6>[ 0.098584] gpiochip_add: registered GPIOs 0 to 15 on device: generic
<6>[ 0.098744] gpiochip_add: registered GPIOs 16 to 42 on device: generic
<6>[ 0.098916] gpiochip_add: registered GPIOs 43 to 67 on device: generic
<6>[ 0.099088] gpiochip_add: registered GPIOs 68 to 94 on device: generic
<6>[ 0.099241] gpiochip_add: registered GPIOs 95 to 106 on device: generic
<6>[ 0.099394] gpiochip_add: registered GPIOs 107 to 132 on device: generic
<6>[ 0.100739] Shared PLL control available.
<6>[ 0.101296] acpuclk_7627_probe()
<6>[ 0.102719] ACPU running at 600000 KHz
<6>[ 0.102744] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
<6>[ 0.102778] 0 19200 5 1 2400 4 30720 -1 -1 -1 -1 5 3 4 6
<6>[ 0.102808] 1 61440 1 4 7680 4 61440 -1 -1 -1 -1 5 3 4 6
<6>[ 0.102838] 2 122880 1 2 15360 4 61440 -1 1 -1 -1 7 3 4 6
<6>[ 0.102868] 3 245760 1 1 30720 4 61440 -1 1 -1 -1 7 -1 8 6
<6>[ 0.102898] 4 300000 2 4 37500 4 122880 -1 1 -1 -1 7 -1 8 6
<6>[ 0.102928] 5 320000 0 3 40000 4 122880 -1 1 4 -1 7 -1 8 6
<6>[ 0.102958] 6 400000 4 2 50000 4 122880 5 1 4 -1 7 -1 8 9
<6>[ 0.102989] 7 480000 0 2 60000 4 122880 5 2 4 6 -1 -1 8 9
<6>[ 0.103019] 8 600000 2 2 75000 4 160000 5 3 4 6 -1 -1 -1 9
<6>[ 0.103049] 9 800000 4 1 100000 4 200000 7 -1 8 6 -1 -1 14 10
<6>[ 0.103079] 10 1008000 4 1 126000 4 200000 -1 -1 -1 9 -1 -1 16 -1
<6>[ 0.103109] 11 1056000 2 1 132000 4 200000 -1 -1 -1 9 -1 -1 16 -1
<6>[ 0.103141] 12 1113600 2 1 139200 4 200000 -1 -1 11 9 -1 -1 16 -1
<6>[ 0.103171] 13 1152000 2 1 144000 4 200000 -1 -1 11 9 -1 -1 16 -1
<6>[ 0.103201] 14 1190400 2 1 148800 4 200000 -1 -1 11 9 -1 -1 16 -1
<6>[ 0.103233] 15 1228800 2 1 153600 4 200000 -1 -1 11 10 -1 -1 16 -1
<6>[ 0.103263] 16 1267200 2 1 158400 4 200000 -1 -1 11 10 -1 -1 -1 -1
<6>[ 0.103286] CPU0: 13 scaling frequencies supported.
<6>[ 0.104056] smps1: 1100 mV normal
<6>[ 0.104624] smps2: 1100 mV normal
<6>[ 0.105163] smps3: 1800 mV normal
<6>[ 0.105673] smps4: 2100 mV normal
<6>[ 0.106236] ldo01: 3000 <--> 3300 mV normal
<6>[ 0.106789] ldo02: 2100 mV normal
<6>[ 0.107413] ldo03: 1200 mV normal
<6>[ 0.107989] ldo04: 1100 mV normal
<6>[ 0.108524] ldo05: normal
<6>[ 0.109066] ldo06: 1200 mV normal
<6>[ 0.109646] ldo07: 2600 mV normal
<6>[ 0.110213] ldo08: 2800 mV normal
<6>[ 0.110896] ldo09: 1800 mV normal
<6>[ 0.111398] ldo10: 2850 mV normal
<6>[ 0.111998] ldo11: 1800 mV normal
<6>[ 0.112574] ldo12: 3300 mV normal
<6>[ 0.113211] ldo13: 2850 mV normal
<6>[ 0.113798] ldo14: 3000 <--> 3300 mV normal
<6>[ 0.114343] ldo15: 1800 mV normal
<6>[ 0.114864] ldo16: 3000 mV normal
<6>[ 0.115391] ldo17: 2800 mV normal
<6>[ 0.115921] ldo18: 2700 mV normal
<6>[ 0.116541] ldo19: 3000 mV normal
<6>[ 0.117076] ncp: 1800 mV normal
<4>[ 0.117529] smps3: Failed to create debugfs directory
<4>[ 0.117948] [TSP] msm_device_i2c_init =======gpio_request==test======ln=3921
<3>[ 0.118189] sec_jack:gpio_request fail
<6>[ 0.121813] persistent_ram: uncorrectable error in header
<6>[ 0.121839] persistent_ram: no valid data in buffer (sig = 0x40014004)
<6>[ 0.143973] console [ram-1] enabled
<6>[ 0.148211] samsung sys class init.
<6>[ 0.148439] [KEY] keypad_gpio_init start
<6>[ 0.154724] fs_gfx3d: normal
<6>[ 0.194768] bio: create slab <bio-0> at 0
<3>[ 0.454553] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x22
<3>[ 0.454853] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 0.455013] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 0.455293] qup_i2c qup_i2c.0: OP Flags: 10
<4>[ 0.455473] sx150x 0-0022: i2c write fail: can't write 01 to 10: -110
<4>[ 0.455796] sx150x: probe of 0-0022 failed with error -110
<3>[ 0.456248] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1343c8, irq:43
<3>[ 0.456556] qup_i2c qup_i2c.1: I2C slave addr:0x3e not connected
<4>[ 0.456729] sx150x 1-003e: i2c write fail: can't write 01 to 1f: -107
<4>[ 0.457034] sx150x: probe of 1-003e failed with error -107
<6>[ 0.457844] ION heap vmalloc created
<6>[ 0.458218] ION heap camera_preview created at 29700000 with size 1200000
<6>[ 0.458429] ION heap audio created at 2a900000 with size 22e000
<6>[ 0.458811] ION heap sf created at 2ab2e000 with size 1800000
<5>[ 0.459774] SCSI subsystem initialized
<6>[ 0.460571] usbcore: registered new interface driver usbfs
<6>[ 0.460896] usbcore: registered new interface driver hub
<6>[ 0.461549] usbcore: registered new device driver usb
<6>[ 0.462488] i2c-gpio i2c-gpio.2: using pins 40 (SDA) and 35 (SCL)
<6>[ 0.463709] i2c-gpio i2c-gpio.4: using pins 17 (SDA) and 16 (SCL)
<6>[ 0.464299] i2c-gpio i2c-gpio.6: using pins 79 (SDA) and 78 (SCL)
<6>[ 0.465116] i2c-gpio i2c-gpio.3: using pins 122 (SDA) and 123 (SCL)
<6>[ 0.465708] i2c-gpio i2c-gpio.5: using pins 13 (SDA) and 14 (SCL)
<6>[ 0.466044] Linux media interface: v0.10
<6>[ 0.466318] Linux video capture interface: v2.00
<6>[ 0.466853] [SENSORS CORE] sensors_class_init
<6>[ 0.467303] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.468661] Bluetooth: Core ver 2.16
<6>[ 0.469046] NET: Registered protocol family 31
<6>[ 0.469201] Bluetooth: HCI device and connection manager initialized
<6>[ 0.469488] Bluetooth: HCI socket layer initialized
<6>[ 0.469644] Bluetooth: L2CAP socket layer initialized
<6>[ 0.470494] Bluetooth: SCO socket layer initialized
<6>[ 0.470929] nfc: nfc_init: NFC Core ver 0.1
<6>[ 0.471199] NET: Registered protocol family 39
<6>[ 0.472163] Switching to clocksource dg_timer
<6>[ 0.538589] NET: Registered protocol family 2
<6>[ 0.539321] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.541189] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.543911] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
<6>[ 0.545121] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.545414] TCP: reno registered
<6>[ 0.545688] UDP hash table entries: 256 (order: 1, 12288 bytes)
<6>[ 0.546094] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
<6>[ 0.547084] NET: Registered protocol family 1
<6>[ 0.548253] Unpacking initramfs...
<6>[ 0.593884] Freeing initrd memory: 336K
<3>[ 0.598903] Notify: smsm init
<4>[ 0.600411] get_nand_partitions: no flash partition table in shared memory
<6>[ 0.608979] rpcrouter_smd_remote_notify: smd opened 0x (null)
<3>[ 0.617183] rpcrouter: Server create rejected, version = 0, program = 3000003b
<3>[ 0.618874] BUG: sleeping function called from invalid context at ../../../../../../../jena/cm/kernel/samsung/msm7x27a/kernel/mutex.c:85
<3>[ 0.619171] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
<4>[ 0.619504] [<c00140d8>] (unwind_backtrace+0x0/0xe0) from [<c05c0f98>] (mutex_lock+0x18/0x3c)
<4>[ 0.619814] [<c05c0f98>] (mutex_lock+0x18/0x3c) from [<c017ce3c>] (create_dir+0x50/0xac)
<4>[ 0.619993] [<c017ce3c>] (create_dir+0x50/0xac) from [<c017d170>] (sysfs_create_dir+0x80/0xa0)
<4>[ 0.620294] [<c017d170>] (sysfs_create_dir+0x80/0xa0) from [<c02663dc>] (kobject_add_internal+0xc4/0x1fc)
<4>[ 0.620598] [<c02663dc>] (kobject_add_internal+0xc4/0x1fc) from [<c02667f8>] (kobject_init_and_add+0x48/0x60)
<4>[ 0.620911] [<c02667f8>] (kobject_init_and_add+0x48/0x60) from [<c02fae10>] (bus_add_driver+0x88/0x224)
<4>[ 0.621216] [<c02fae10>] (bus_add_driver+0x88/0x224) from [<c02fbd24>] (driver_register+0x9c/0x128)
<4>[ 0.621518] [<c02fbd24>] (driver_register+0x9c/0x128) from [<c084b43c>] (adsp_init+0xd4/0x150)
<4>[ 0.621696] [<c084b43c>] (adsp_init+0xd4/0x150) from [<c0008660>] (do_one_initcall+0x34/0xf8)
<4>[ 0.621998] [<c0008660>] (do_one_initcall+0x34/0xf8) from [<c0842c20>] (do_initcalls+0x70/0xa0)
<4>[ 0.622298] [<c0842c20>] (do_initcalls+0x70/0xa0) from [<c0842cd4>] (kernel_init+0x84/0x11c)
<4>[ 0.622701] [<c0842cd4>] (kernel_init+0x84/0x11c) from [<c000ec14>] (kernel_thread_exit+0x0/0x8)
<3>[ 0.632866] rpcrouter: Server create rejected, version = 0, program = 30000051
<4>[ 0.636354] ------------[ cut here ]------------
<4>[ 0.636544] WARNING: at ../../../../../../../jena/cm/kernel/samsung/msm7x27a/fs/sysfs/dir.c:508 sysfs_add_one+0x94/0xb4()
<4>[ 0.636828] sysfs: cannot create duplicate filename '/devices/platform/msm_adsp'
<4>[ 0.637111] Modules linked in:
<4>[ 0.637451] [<c00140d8>] (unwind_backtrace+0x0/0xe0) from [<c0083da4>] (warn_slowpath_common+0x4c/0x64)
<4>[ 0.637754] [<c0083da4>] (warn_slowpath_common+0x4c/0x64) from [<c0083e3c>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 0.638056] [<c0083e3c>] (warn_slowpath_fmt+0x2c/0x3c) from [<c017cc40>] (sysfs_add_one+0x94/0xb4)
<4>[ 0.638356] [<c017cc40>] (sysfs_add_one+0x94/0xb4) from [<c017ce48>] (create_dir+0x5c/0xac)
<4>[ 0.638656] [<c017ce48>] (create_dir+0x5c/0xac) from [<c017d170>] (sysfs_create_dir+0x80/0xa0)
<4>[ 0.638839] [<c017d170>] (sysfs_create_dir+0x80/0xa0) from [<c02663dc>] (kobject_add_internal+0xc4/0x1fc)
<4>[ 0.639139] [<c02663dc>] (kobject_add_internal+0xc4/0x1fc) from [<c0266878>] (kobject_add+0x68/0x8c)
<4>[ 0.639439] [<c0266878>] (kobject_add+0x68/0x8c) from [<c02f9500>] (device_add+0xe0/0x348)
<4>[ 0.639746] [<c02f9500>] (device_add+0xe0/0x348) from [<c02fcc6c>] (platform_device_add+0x108/0x164)
<4>[ 0.640049] [<c02fcc6c>] (platform_device_add+0x108/0x164) from [<c0033304>] (rpcrouter_register_board_dev+0x70/0xf0)
<4>[ 0.640348] [<c0033304>] (rpcrouter_register_board_dev+0x70/0xf0) from [<c0033df0>] (process_control_msg+0x294/0x434)
<4>[ 0.640526] [<c0033df0>] (process_control_msg+0x294/0x434) from [<c00340e8>] (do_read_data+0x158/0x5b8)
<4>[ 0.640831] [<c00340e8>] (do_read_data+0x158/0x5b8) from [<c009bbe4>] (process_one_work+0x274/0x48c)
<4>[ 0.641134] [<c009bbe4>] (process_one_work+0x274/0x48c) from [<c009bf9c>] (worker_thread+0x1a0/0x340)
<4>[ 0.641439] [<c009bf9c>] (worker_thread+0x1a0/0x340) from [<c009fe9c>] (kthread+0x80/0x8c)
<4>[ 0.641744] [<c009fe9c>] (kthread+0x80/0x8c) from [<c000ec14>] (kernel_thread_exit+0x0/0x8)
<4>[ 0.641976] ---[ end trace 40ad4664262ada84 ]---
<4>[ 0.642266] ------------[ cut here ]------------
<4>[ 0.642438] WARNING: at ../../../../../../../jena/cm/kernel/samsung/msm7x27a/lib/kobject.c:198 kobject_add_internal+0x19c/0x1fc()
<4>[ 0.642724] kobject_add_internal failed for msm_adsp with -EEXIST, don't try to register things with the same name in the same directory.
<4>[ 0.643006] Modules linked in:
<4>[ 0.643446] [<c00140d8>] (unwind_backtrace+0x0/0xe0) from [<c0083da4>] (warn_slowpath_common+0x4c/0x64)
<4>[ 0.643624] [<c0083da4>] (warn_slowpath_common+0x4c/0x64) from [<c0083e3c>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 0.643928] [<c0083e3c>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02664b4>] (kobject_add_internal+0x19c/0x1fc)
<4>[ 0.644229] [<c02664b4>] (kobject_add_internal+0x19c/0x1fc) from [<c0266878>] (kobject_add+0x68/0x8c)
<4>[ 0.644529] [<c0266878>] (kobject_add+0x68/0x8c) from [<c02f9500>] (device_add+0xe0/0x348)
<4>[ 0.644831] [<c02f9500>] (device_add+0xe0/0x348) from [<c02fcc6c>] (platform_device_add+0x108/0x164)
<4>[ 0.645133] [<c02fcc6c>] (platform_device_add+0x108/0x164) from [<c0033304>] (rpcrouter_register_board_dev+0x70/0xf0)
<4>[ 0.645308] [<c0033304>] (rpcrouter_register_board_dev+0x70/0xf0) from [<c0033df0>] (process_control_msg+0x294/0x434)
<4>[ 0.645486] [<c0033df0>] (process_control_msg+0x294/0x434) from [<c00340e8>] (do_read_data+0x158/0x5b8)
<4>[ 0.645789] [<c00340e8>] (do_read_data+0x158/0x5b8) from [<c009bbe4>] (process_one_work+0x274/0x48c)
<4>[ 0.646091] [<c009bbe4>] (process_one_work+0x274/0x48c) from [<c009bf9c>] (worker_thread+0x1a0/0x340)
<4>[ 0.646389] [<c009bf9c>] (worker_thread+0x1a0/0x340) from [<c009fe9c>] (kthread+0x80/0x8c)
<4>[ 0.646689] [<c009fe9c>] (kthread+0x80/0x8c) from [<c000ec14>] (kernel_thread_exit+0x0/0x8)
<4>[ 0.646851] ---[ end trace 40ad4664262ada85 ]---
<3>[ 0.647133] rpcrouter_register_board_dev: board dev register failed -17
<6>[ 0.647379] [adsp.c:adsp_init] msm_adsp -- 0
<6>[ 0.649434] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.649603] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[ 0.649883] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.650039] [audpp.c:audpp_probe] queueid:13
<6>[ 0.650316] [audpp.c:audpp_probe] decid:0
<6>[ 0.650471] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.650628] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.650906] [audpp.c:audpp_probe] queueid:14
<6>[ 0.651063] [audpp.c:audpp_probe] decid:1
<6>[ 0.651338] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.651494] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.651771] [audpp.c:audpp_probe] queueid:15
<6>[ 0.651926] [audpp.c:audpp_probe] decid:2
<6>[ 0.652081] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.652359] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.655834] [audpp.c:audpp_probe] queueid:16
<6>[ 0.656123] [audpp.c:audpp_probe] decid:3
<6>[ 0.656276] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.656434] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.656713] [audpp.c:audpp_probe] queueid:17
<6>[ 0.656868] [audpp.c:audpp_probe] decid:4
<6>[ 0.657144] [audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.658903] __msm_rpc_connect: server not found 30000002:20001
<1>[ 0.662026] dma_test_init, minor number 33
<4>[ 0.662711] [VIB] platform driver register result : 0
<6>[ 0.663041] rmt_storage_get_ramfs: RAMFS entry: addr = 0x2cec0000, size = 0x00300000
<6>[ 0.663329] rmt_storage_get_ramfs: RAMFS entry: addr = 0x2cdc0000, size = 0x00100000
<6>[ 0.665408] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
<6>[ 0.673396] msm_pbus_handler_probe: PBUS handler initialized
<6>[ 0.674464] audit: initializing netlink socket (disabled)
<5>[ 0.674699] type=2000 audit(0.660:1): initialized
<6>[ 0.693743] fuse init (API version 7.18)
<6>[ 0.694686] msgmni has been set to 773
<7>[ 0.695071] SELinux: Registering netfilter hooks
<4>[ 0.696813] cryptomgr_test used greatest stack depth: 7192 bytes left
<6>[ 0.699441] io scheduler noop registered (default)
<6>[ 0.700153] io scheduler cfq registered
<6>[ 0.700599] io scheduler bfq registered
<6>[ 0.704991] setting pdata->panel_info.fb_num to 3. type: 3
<6>[ 0.708334] FrameBuffer[0] 320x480 size=1843200 bytes is registered successfully!
<3>[ 0.708504] pm_runtime: fail to wake up
<7>[ 0.732779] LCD start lcdc_trebon_panel_on
<7>[ 0.745383] Registered led device: lcd-backlight
<7>[ 0.745861] LCD skip lcd reset
<7>[ 0.746628] LCD ldi mtpdata: 5b bc d0
<6>[ 0.747479] msm_serial: detected port #0
<6>[ 0.747794] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 9) is a MSM
<6>[ 0.748918] msm_serial: driver initialized
<6>[ 0.750034] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 0.750816] msm_serial_hs module loaded
<6>[ 0.751239] msm_serial_hsl: driver initialized
<6>[ 0.755113] diagchar initialized now
<4>[ 0.760109] dalrpc_rcv_DAL0 used greatest stack depth: 7104 bytes left
<6>[ 0.761328] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 0.773896] loop: module loaded
<1>[ 0.774223] pmem: pmem_setup: unable to register pmem driver(pmem) - zero size passed in!
<4>[ 0.774536] android_pmem: probe of android_pmem.0 failed with error -1
<6>[ 0.774853] pmem: Initializing pmem_adsp as cached
<6>[ 0.775403] allocating 9437184 bytes at 2c32e000 physical for pmem_adsp
<1>[ 0.775623] pmem: pmem_setup: unable to register pmem driver(pmem_audio) - zero size passed in!
<4>[ 0.775924] android_pmem: probe of android_pmem.2 failed with error -1
<4>[ 0.776536] i2c-core: driver [fsa9480] using legacy suspend method
<4>[ 0.776699] i2c-core: driver [fsa9480] using legacy resume method
<6>[ 0.777388] Loading pn544 driver
<4>[ 0.777663] pn544: probe of 5-002b failed with error -16
<6>[ 0.778084] fsa_microusb 3-0025: [FSAxxxx micro usb] PROBE ...
<6>[ 0.783058] fsa_microusb 3-0025: [fsausb_irq_init] set ctrl=0x1e
<6>[ 0.783588] fsa_microusb 3-0025: [fsausb_probe] 673
<6>[ 0.784421] [BATT] Board file [FSA880]: Reset Callback
<6>[ 0.788229] fsa_microusb 3-0025: intr: 0x1, dev1: 0x4, dev2: 0x0
<6>[ 0.788391] [BATT] [jena_usb_cb] Board file [FSA880]: USB Callback
<6>[ 0.789339] fsa_microusb 3-0025: [FSA9280] PROBE Done.
<4>[ 0.789566] i2c-core: driver [fsa_microusb] using legacy resume method
<4>[ 0.789998] msm_bahama_setup_power -msm_bahama_setup_power
<4>[ 0.790246] smps3: Failed to create debugfs directory
<6>[ 1.114176] SCSI Media Changer driver v0.25
<6>[ 1.116134] msm_nand_probe: phys addr 0xa0a00000
<6>[ 1.116308] msm_nand_probe: Dual Nand Ctrl in ping-pong mode
<6>[ 1.116591] msm_nand_probe: dmac 0x7
<6>[ 1.116859] msm_nand_probe: allocated dma buffer at ffdec000, dma_addr 28906000
<3>[ 1.117561] flash_onfi_probe: No partition info available
<6>[ 1.117884] status: 20
<6>[ 1.118164] nandid: 0 maker 00 device 00
<3>[ 1.118329] ERROR: unknown nand device manuf=0 devid=0
<6>[ 1.118568] SFLASHC Async Mode bit: 0
<6>[ 1.118929] =================================================================
<6>[ 1.119098] flash_onenand_probe: manufacturer_id = 0xf000
<6>[ 1.119374] flash_onenand_probe: device_id = 0xf001
<6>[ 1.119529] flash_onenand_probe: version_id = 0xf002
<6>[ 1.119813] flash_onenand_probe: data_buf_size = 0xf003
<6>[ 1.119976] flash_onenand_probe: boot_buf_size = 0xf004
<6>[ 1.120263] flash_onenand_probe: num_of_buffers = 0xf005
<6>[ 1.120423] flash_onenand_probe: technology = 0xf006
<6>[ 1.120709] =================================================================
<6>[ 1.120869] flash_onenand_probe: Detected an unsupported device
<3>[ 1.121148] msm_nand_probe: No nand device found
<6>[ 1.121586] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.121871] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 1.122273] rmnet_init: SMD devices[8]
<3>[ 1.133024] failed to request 141 GPIO
<6>[ 1.134646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.135053] host driver registered w/ tranceiver
<6>[ 1.135639] usbcore: registered new interface driver cdc_acm
<6>[ 1.135806] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 1.136096] Initializing USB Mass Storage driver...
<6>[ 1.136389] usbcore: registered new interface driver usb-storage
<6>[ 1.136669] USB Mass Storage support registered.
<6>[ 1.136899] usbcore: registered new interface driver ums-alauda
<6>[ 1.137259] usbcore: registered new interface driver ums-cypress
<6>[ 1.137519] usbcore: registered new interface driver ums-datafab
<6>[ 1.137881] usbcore: registered new interface driver ums-freecom
<6>[ 1.138111] usbcore: registered new interface driver ums-isd200
<6>[ 1.138464] usbcore: registered new interface driver ums-jumpshot
<6>[ 1.138698] usbcore: registered new interface driver ums-karma
<6>[ 1.139049] usbcore: registered new interface driver ums-onetouch
<6>[ 1.139423] usbcore: registered new interface driver ums-sddr09
<6>[ 1.139658] usbcore: registered new interface driver ums-sddr55
<6>[ 1.140011] usbcore: registered new interface driver ums-usbat
<6>[ 1.140263] usbcore: registered new interface driver usb_ehset_test
<6>[ 1.141541] peripheral driver registered w/ tranceiver
<6>[ 1.142913] mbim_init: initialize 1 instances
<6>[ 1.143284] mbim_init: Initialized 1 ports
<7>[ 1.147441] usb: mass_storage_function_init pdata->nluns=0, cdrom = 0
<6>[ 1.148238] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.148419] android_usb gadget: Number of LUNs=2
<6>[ 1.148701] lun0: LUN: removable file: (no medium)
<6>[ 1.148859] lun1: LUN: removable file: (no medium)
<6>[ 1.149803] android_usb gadget: android_usb ready
<3>[ 1.201558] ts_power_enable off
<6>[ 1.592636] android_work: android_work: did not send uevent (0 0 (null))
<3>[ 1.702531] ts_power_enable on
<3>[ 2.212368] melfas_ts_probe: i2c_master_send() [1], Add[72]
<3>[ 2.214009] melfas_ts_SET_DOWNLOAD_BY_GPIO : [6], [65], [67], [39]
<6>[ 2.214631] input: sec_touchscreen as /devices/virtual/input/input0
<6>[ 2.216989] GPIO Matrix Keypad Driver: Start keypad matrix for 7x27a_kp in interrupt mode
<6>[ 2.217844] input: 7x27a_kp as /devices/virtual/input/input1
<6>[ 2.223071] using rtc device, msm_rtc, for alarms
<6>[ 2.223411] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
<6>[ 2.224676] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
<6>[ 2.225036] i2c /dev entries driver
<3>[ 2.227104] ############# SR300PC20 probe ##############
<4>[ 2.227493] ------------[ cut here ]------------
<4>[ 2.227674] WARNING: at ../../../../../../../jena/cm/kernel/samsung/msm7x27a/arch/arm/mach-msm/clock.c:193 clk_enable+0x58/0x1e4()
<4>[ 2.227963] CSI1_P_CLK: Don't call enable on unprepared clocks
<4>[ 2.228239] Modules linked in:
<4>[ 2.228583] [<c00140d8>] (unwind_backtrace+0x0/0xe0) from [<c0083da4>] (warn_slowpath_common+0x4c/0x64)
<4>[ 2.228889] [<c0083da4>] (warn_slowpath_common+0x4c/0x64) from [<c0083e3c>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 2.229194] [<c0083e3c>] (warn_slowpath_fmt+0x2c/0x3c) from [<c001c83c>] (clk_enable+0x58/0x1e4)
<4>[ 2.229383] [<c001c83c>] (clk_enable+0x58/0x1e4) from [<c03dd87c>] (msm_camio_clk_enable+0x17c/0x1ac)
<4>[ 2.229689] [<c03dd87c>] (msm_camio_clk_enable+0x17c/0x1ac) from [<c03ddc38>] (msm_camio_probe_on+0x54/0x7c)
<4>[ 2.229991] [<c03ddc38>] (msm_camio_probe_on+0x54/0x7c) from [<c03ddffc>] (msm_sync_init+0x68/0x158)
<4>[ 2.230293] [<c03ddffc>] (msm_sync_init+0x68/0x158) from [<c03e1ea0>] (msm_camera_drv_start+0xd0/0x168)
<4>[ 2.230598] [<c03e1ea0>] (msm_camera_drv_start+0xd0/0x168) from [<c02fc7c0>] (platform_drv_probe+0x14/0x18)
<4>[ 2.230904] [<c02fc7c0>] (platform_drv_probe+0x14/0x18) from [<c02fb5a0>] (really_probe+0x98/0x1c4)
<4>[ 2.231081] [<c02fb5a0>] (really_probe+0x98/0x1c4) from [<c02fb7f4>] (driver_probe_device+0x48/0x60)
<4>[ 2.231381] [<c02fb7f4>] (driver_probe_device+0x48/0x60) from [<c02fb86c>] (__driver_attach+0x60/0x84)
<4>[ 2.231681] [<c02fb86c>] (__driver_attach+0x60/0x84) from [<c02fa048>] (bus_for_each_dev+0x50/0x90)
<4>[ 2.231981] [<c02fa048>] (bus_for_each_dev+0x50/0x90) from [<c02fae34>] (bus_add_driver+0xac/0x224)
<4>[ 2.232279] [<c02fae34>] (bus_add_driver+0xac/0x224) from [<c02fbd24>] (driver_register+0x9c/0x128)
<4>[ 2.232458] [<c02fbd24>] (driver_register+0x9c/0x128) from [<c0008660>] (do_one_initcall+0x34/0xf8)
<4>[ 2.232763] [<c0008660>] (do_one_initcall+0x34/0xf8) from [<c0842c20>] (do_initcalls+0x70/0xa0)
<4>[ 2.233063] [<c0842c20>] (do_initcalls+0x70/0xa0) from [<c0842cd4>] (kernel_init+0x84/0x11c)
<4>[ 2.233366] [<c0842cd4>] (kernel_init+0x84/0x11c) from [<c000ec14>] (kernel_thread_exit+0x0/0x8)
<4>[ 2.233651] ---[ end trace 40ad4664262ada86 ]---
<4>[ 2.234329] ------------[ cut here ]------------
<4>[ 2.234501] WARNING: at ../../../../../../../jena/cm/kernel/samsung/msm7x27a/arch/arm/mach-msm/clock.c:193 clk_enable+0x58/0x1e4()
<4>[ 2.234784] CAM_M_CLK: Don't call enable on unprepared clocks
<4>[ 2.235064] Modules linked in:
<4>[ 2.235383] [<c00140d8>] (unwind_backtrace+0x0/0xe0) from [<c0083da4>] (warn_slowpath_common+0x4c/0x64)
<4>[ 2.235684] [<c0083da4>] (warn_slowpath_common+0x4c/0x64) from [<c0083e3c>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 2.235986] [<c0083e3c>] (warn_slowpath_fmt+0x2c/0x3c) from [<c001c83c>] (clk_enable+0x58/0x1e4)
<4>[ 2.236288] [<c001c83c>] (clk_enable+0x58/0x1e4) from [<c03dd87c>] (msm_camio_clk_enable+0x17c/0x1ac)
<4>[ 2.236468] [<c03dd87c>] (msm_camio_clk_enable+0x17c/0x1ac) from [<c03ddffc>] (msm_sync_init+0x68/0x158)
<4>[ 2.236764] [<c03ddffc>] (msm_sync_init+0x68/0x158) from [<c03e1ea0>] (msm_camera_drv_start+0xd0/0x168)
<4>[ 2.237064] [<c03e1ea0>] (msm_camera_drv_start+0xd0/0x168) from [<c02fc7c0>] (platform_drv_probe+0x14/0x18)
<4>[ 2.237364] [<c02fc7c0>] (platform_drv_probe+0x14/0x18) from [<c02fb5a0>] (really_probe+0x98/0x1c4)
<4>[ 2.237663] [<c02fb5a0>] (really_probe+0x98/0x1c4) from [<c02fb7f4>] (driver_probe_device+0x48/0x60)
<4>[ 2.237961] [<c02fb7f4>] (driver_probe_device+0x48/0x60) from [<c02fb86c>] (__driver_attach+0x60/0x84)
<4>[ 2.238138] [<c02fb86c>] (__driver_attach+0x60/0x84) from [<c02fa048>] (bus_for_each_dev+0x50/0x90)
<4>[ 2.238433] [<c02fa048>] (bus_for_each_dev+0x50/0x90) from [<c02fae34>] (bus_add_driver+0xac/0x224)
<4>[ 2.238729] [<c02fae34>] (bus_add_driver+0xac/0x224) from [<c02fbd24>] (driver_register+0x9c/0x128)
<4>[ 2.239026] [<c02fbd24>] (driver_register+0x9c/0x128) from [<c0008660>] (do_one_initcall+0x34/0xf8)
<4>[ 2.239323] [<c0008660>] (do_one_initcall+0x34/0xf8) from [<c0842c20>] (do_initcalls+0x70/0xa0)
<4>[ 2.239499] [<c0842c20>] (do_initcalls+0x70/0xa0) from [<c0842cd4>] (kernel_init+0x84/0x11c)
<4>[ 2.239799] [<c0842cd4>] (kernel_init+0x84/0x11c) from [<c000ec14>] (kernel_thread_exit+0x0/0x8)
<4>[ 2.240083] ---[ end trace 40ad4664262ada87 ]---
<3>[ 2.240399] sr300pc20_probe succeeded!
<6>[ 2.240793] sr300pc20_sensor_probe:1854
<6>[ 2.242226] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
<6>[ 2.243408] bq27425_init[bq27425]bq27425_init entry
<6>[ 2.243686] bq27425_probe[BATT] bq27425 probe: fuel_gauge_probe
<3>[ 2.244643] i2c i2c-6: sendbytes: NAK bailout.
<3>[ 2.244834] bq27425 6-0055: bq27425_write_reg: err -5
<6>[ 2.247928] [BATT] seal read cfg code data0 0x6
<6>[ 2.248206] [BATT]seal read cfg code data1 0x0
<6>[ 2.248363] bq27425_probe [BATT] CFG Write Sucess :6
<6>[ 2.248726] bq27425_init[bq27425] added driver bq27425, (err: 0)
<6>[ 2.250641] msm_adc successfully registered
<6>[ 2.250929] msm_adc successfully registered
<6>[ 2.251981] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[ 2.252654] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.252818] Bluetooth: HCI H4 protocol initialized
<6>[ 2.253094] Bluetooth: HCI BCSP protocol initialized
<6>[ 2.253249] Bluetooth: HCI_IBS protocol initialized
<6>[ 2.253406] Bluetooth: MSM Sleep Mode Driver Ver 1.1
<6>[ 2.256564] mmc0: SDCC Version: 0x00000000
<3>[ 2.256969] mmc0: No card detect facilities available
<4>[ 2.257668] msm_sdcc_setup_vreg : 3 : 0 : level : 1800
<4>[ 2.259554] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<6>[ 2.259983] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 48,0 dma 7 dmacrcri 12
<6>[ 2.260148] mmc0: Controller capabilities: 0x00000001
<6>[ 2.260431] mmc0: 8 bit data mode enabled
<6>[ 2.260588] mmc0: 4 bit data mode disabled
<6>[ 2.260743] mmc0: polling status mode disabled
<6>[ 2.261026] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 2.261184] mmc0: Slot eject status = 0
<6>[ 2.261463] mmc0: Power save feature enable = 1
<6>[ 2.261623] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x289a0000
<6>[ 2.261906] mmc0: DM cmd busaddr 0x289a0000, cmdptr busaddr 0x289b7f40
<6>[ 2.263724] mmc1: SDCC Version: 0x00000000
<4>[ 2.264203] msm7x2xa_sdcc_slot_status entered
<4>[ 2.264451] <=PMMC=> msm7x2xa_sdcc_slot_status : status : 1
<4>[ 2.264946] msm7x2xa_sdcc_slot_status entered
<4>[ 2.265309] <=PMMC=> msm7x2xa_sdcc_slot_status : status : 1
<4>[ 2.266078] msm_sdcc_setup_vreg : 1 : 0 : level : 2850
<6>[ 2.267596] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,350 dma 8 dmacrcri 6
<6>[ 2.267881] mmc1: Controller capabilities: 0x00000001
<6>[ 2.268034] mmc1: 8 bit data mode disabled
<6>[ 2.268191] mmc1: 4 bit data mode enabled
<6>[ 2.268469] mmc1: polling status mode disabled
<6>[ 2.268626] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 2.268904] mmc1: Slot eject status = 0
<6>[ 2.269059] mmc1: Power save feature enable = 1
<6>[ 2.269219] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x289c0000
<6>[ 2.269501] mmc1: DM cmd busaddr 0x289c0000, cmdptr busaddr 0x289d7f40
<4>[ 2.271051] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<6>[ 2.271789] mmc2: SDCC Version: 0x00000000
<6>[ 2.272309] wlan_status entered
<6>[ 2.272666] register_wlan_status_notify --enter
<4>[ 2.273201] msm_sdcc_setup_vreg : 2 : 0 : level : 1800
<6>[ 2.274594] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
<6>[ 2.274764] mmc2: Controller capabilities: 0x00000001
<6>[ 2.275043] mmc2: 8 bit data mode disabled
<6>[ 2.275198] mmc2: 4 bit data mode enabled
<6>[ 2.275351] mmc2: polling status mode disabled
<6>[ 2.275634] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 2.275798] mmc2: Slot eject status = 1
<6>[ 2.276073] mmc2: Power save feature enable = 1
<6>[ 2.276234] mmc2: DM non-cached buffer at ffd40000, dma_addr 0x289e0000
<6>[ 2.276518] mmc2: DM cmd busaddr 0x289e0000, cmdptr busaddr 0x289f7f40
<4>[ 2.276923] [KeyLED] msm_pmic_led_init
<4>[ 2.277341] [KeyLED] msm_pmic_led_probe
<7>[ 2.277733] Registered led device: button-backlight
<4>[ 2.277751] msm_pmic_led_probe misc_register(backlightnotification)
<4>[ 2.278176] [KeyLED] msm_keypad_bl_led_set: gpio124_value=0
<7>[ 2.279088] Registered led device: keyboard-backlight
<4>[ 2.294328] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<6>[ 2.295631] usbcore: registered new interface driver usbhid
<6>[ 2.295909] usbhid: USB HID core driver
<4>[ 2.297141] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<6>[ 2.310408] ashmem: initialized
<6>[ 2.310751] logger: created 256K log 'log_main'
<6>[ 2.311101] logger: created 256K log 'log_events'
<6>[ 2.316659] logger: created 256K log 'log_radio'
<6>[ 2.316986] logger: created 256K log 'log_system'
<6>[ 2.322959] dpram_probe:1846 - SMEM_DPRAM allocation
<6>[ 2.323129] dpram_probe:1863 - SmemBase = 0xfa327468
<6>[ 2.329028] dpram_probe:1888 - Register interrupt handler
<6>[ 2.334441] register_interrupt_handler:1677 - Dpram clear start
<6>[ 2.334604] dpram_clear:793 - SmemBase = fa327468
<6>[ 2.340519] register_interrupt_handler:1690 - INT_A9_M2A_3 interrupt handler success
<6>[ 2.340884] dpram_init:2092 - smem_vendor1 = 0xFA3068D8
<4>[ 2.341044] [Silent Value] : 0
<6>[ 2.346719] [HSCD] probe
<6>[ 2.347008] i2c i2c-4: detected HSCD magnetic sensor
<4>[ 2.352258] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<4>[ 2.353363] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<4>[ 2.353734] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<4>[ 2.353994] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<4>[ 2.356778] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<6>[ 2.360064] Thanks to into sensors_register
<6>[ 2.360343] The Class is created
<6>[ 2.361094] input: Unspecified device as /devices/virtual/input/input2
<6>[ 2.361814] alps-init: platform_driver_register
<6>[ 2.362354] alps-init: platform_device_register_simple
<6>[ 2.362619] alps-init: sysfs_create_group
<6>[ 2.362909] alps-init: input_allocate_polled_device
<6>[ 2.363501] input: alps as /devices/platform/alps/input/input3
<6>[ 2.364006] alps-init: input_register_polled_device
<6>[ 2.364344] alps-init: misc_register
<6>[ 2.364578] [ACC] probe
<6>[ 2.364866] i2c i2c-4: detected accelerometer
<6>[ 2.369404] Thanks to into sensors_register
<6>[ 2.369558] The Class is created
<6>[ 2.370403] input: Unspecified device as /devices/virtual/input/input4
<6>[ 2.370991] [ACC] probe
<6>[ 2.371153] i2c i2c-4: detected accelerometer
<3>[ 2.372114] i2c i2c-4: read transfer error
<6>[ 2.372271] [ACC] read error
<6>[ 2.372481] exit_bma222e_input_register_device
<6>[ 2.372759] exit_bma222e_alloc_client_failed
<6>[ 2.372914] exit_bma222e_alloc_data_failed
<4>[ 2.373098] bma222e: probe of 4-0018 failed with error -12
<6>[ 2.373459] [TMP] gp2a_init, 604
<6>[ 2.373759] [TMP] gp2a_i2c_probe, 429
<6>[ 2.374039] gp2a_i2c_probe: 2f 0f
<6>[ 2.374751] input: Unspecified device as /devices/virtual/input/input5
<6>[ 2.375194] Thanks to into sensors_register
<6>[ 2.375478] The Class is created
<6>[ 2.376386] gp2a_irq_handler: work
<4>[ 2.376828] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<6>[ 2.377293] gp2a_setup_irq: request_irq(285) success for gpio 29
<6>[ 2.380394] [TMP] gp2a_i2c_probe, 525
<6>[ 2.382658] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
<3>[ 2.384243] msm_soc: ALSA MSM Mixer Setting
<6>[ 2.385596] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
<6>[ 2.387249] __msm_rpc_connect: server not found 30000002:20001
<7>[ 2.387539] msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
<6>[ 2.387576] oprofile: hardware counters not available
<6>[ 2.387734] oprofile: using timer interrupt.
<6>[ 2.388254] Netfilter messages via NETLINK v0.30.
<6>[ 2.388568] nf_conntrack version 0.5.0 (6191 buckets, 24764 max)
<6>[ 2.390288] ctnetlink v0.93: registering with nfnetlink.
<6>[ 2.391424] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 2.391719] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 2.392741] xt_time: kernel timezone is -0000
<6>[ 2.394054] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.394838] arp_tables: (C) 2002 David S. Miller
<6>[ 2.395176] TCP: cubic registered
<6>[ 2.396646] NET: Registered protocol family 10
<6>[ 2.400968] Mobile IPv6
<6>[ 2.401254] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.401949] IPv6 over IPv4 tunneling driver
<6>[ 2.405031] NET: Registered protocol family 17
<6>[ 2.405398] NET: Registered protocol family 15
<6>[ 2.406054] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.406263] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.406541] Bluetooth: RFCOMM ver 1.11
<6>[ 2.406699] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.406974] Bluetooth: BNEP filters: protocol
<6>[ 2.407134] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.408213] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
<6>[ 2.408574] ThumbEE CPU extension supported.
<4>[ 2.415051] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<4>[ 2.415326] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<4>[ 2.416771] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<6>[ 2.422538] mmc0: new high speed MMC card at address 0001
<6>[ 2.423993] mmcblk0: mmc0:0001 SJS00M 3.64 GiB
<6>[ 2.429399] clock_late_init: Removing enables held for handed-off clocks
<6>[ 2.429799] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 >
<4>[ 2.439033] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<6>[ 2.442851] input: sec_jack as /devices/virtual/input/input6
<4>[ 2.446903] ldo19: incomplete constraints, leaving on
<3>[ 2.447269] [audio_acdb.c:initialize_rpc] ACDB=> Device Attach failed
<4>[ 2.447476] acdb_cb_thread used greatest stack depth: 6804 bytes left
<4>[ 2.447861] ldo12: incomplete constraints, leaving on
<4>[ 2.448031] ldo09: incomplete constraints, leaving on
<4>[ 2.448313] ldo08: incomplete constraints, leaving on
<4>[ 2.448478] ldo07: incomplete constraints, leaving on
<4>[ 2.448769] ldo04: incomplete constraints, leaving on
<4>[ 2.448929] ldo03: incomplete constraints, leaving on
<4>[ 2.449209] ldo02: incomplete constraints, leaving on
<4>[ 2.449379] smps1: incomplete constraints, leaving on
<6>[ 2.450023] sec_jack:sec_jack_probe : Registering jack driver
<4>[ 2.451019] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<6>[ 2.452936] rs30000048 rs30000048.262144: setting system clock to 2014-02-03 10:57:46 UTC (1391425066)
<6>[ 2.453721] __msm_rpc_connect: server not found 30000089:40001
<6>[ 2.454024] __msm_rpc_connect: server not found 30000089:10001
<6>[ 2.454196] __msm_rpc_connect: server not found 30000089:20001
<6>[ 2.460664] [BATTERY] get bat leel and voltage from fuelgauge
<6>[ 2.460841] [BATT] msm_battery_register_callback start
<6>[ 2.461123] msm_set_acc_type : [BATT] acc_status = 1
<6>[ 2.461293] msm_set_cable : [BATT] cable_status(1)
<6>[ 2.461603] msm_batt_set_cable_bt : [BATT] cable_status(1)
<6>[ 2.461763] [BATT] msm_batt_chg_en: Start charging! (USB)
<6>[ 2.462044]
<6>[ 2.462049] Charger Type: STD DOWNSTREAM PORT
<6>[ 2.463331] [BATT] msm_batt_check_event: work !!
<4>[ 2.474611] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<6>[ 2.476068] msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)
<4>[ 2.477471] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<6>[ 2.480604] ALSA device list:
<6>[ 2.480776] #0: msm-audio
<4>[ 2.481294] Warning: unable to open an initial console.
<6>[ 2.482241] Freeing init memory: 216K
<6>[ 2.482778] [BATT] msm_batt_chg_en: Starp charging! (0x2, full_check = 0)
<6>[ 2.483094] msm_batt_set_cable_bt : [BATT] batt_status(1) charger_type(2) source(2)
<6>[ 2.483409] [BATT] timer setting enable
<6>[ 2.488983] [BATT] msm_batt_cb_func: RPC_ACCEPTSTAT_SUCCESS !!
<6>[ 2.489279] [BATT] msm_batt_chg_en: Stop charging! (charging_source = 0x2, full_check = 0)
<6>[ 2.489574] [BATT] msm_batt_update_psy_status: STOP Charging
<4>[ 2.508613] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<4>[ 2.508908] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<4>[ 2.511721] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<6>[ 2.512468] [BATT] msm_batt_chg_en: Start charging! (USB)
<6>[ 2.512751]
<6>[ 2.512756] Charger Type: STD DOWNSTREAM PORT
<6>[ 2.514481] [BATT] msm_batt_chg_en: Starp charging! (0x2, full_check = 0)
<6>[ 2.514783] [BATT] msm_batt_update_psy_status: Start Charging
<6>[ 2.521251] msm_batt_update_psy_status [BATTERY] Rev05 level : 99, voltage : 4160, temp_ap 230 temp_cp : 250, current_fg : 0 cur_cp :0 status 1battery_temp_adc
<6>[ 2.525334] [BATT] msm_batt_cb_func: RPC_ACCEPTSTAT_SUCCESS !!
<6>[ 2.533141] msm_batt_control_temperature [BATT] battery_temp : 250 temp_adc : 25
<6>[ 2.533458] [BATT] msm_batt_update_psy_status: charger_status= 0, charger_type= 2,battery_status=0, battery_temp_adc=579,chg_current=0, battery_temp=579, health 1status = 1
<6>[ 2.534021] [BATT] msm_batt_check_event: work !!
<6>[ 2.541644] msm_batt_update_psy_status [BATTERY] Rev05 level : 99, voltage : 4160, temp_ap 250 temp_cp : 250, current_fg : 0 cur_cp :0 status 1battery_temp_adc
<6>[ 2.553496] msm_batt_control_temperature [BATT] battery_temp : 250 temp_adc : 25
<6>[ 2.553649] [BATT] msm_batt_update_psy_status: charger_status= 0, charger_type= 2,battery_status=0, battery_temp_adc=579,chg_current=0, battery_temp=579, health 1status = 1
<3>[ 2.586878] [MULTIPDP] filp_open() failed~!: -2
<3>[ 2.587018] [MULTIPDP] dpram_open failed! retry
<4>[ 2.622646] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<4>[ 2.658896] mmc1: host does not support reading read-only switch. assuming write-enable.
<4>[ 2.664011] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<4>[ 2.664256] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<4>[ 2.664689] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<6>[ 2.664861] mmc1: new high speed SDHC card at address b368
<6>[ 2.665911] mmcblk1: mmc1:b368 00000 7.51 GiB
<6>[ 2.668426] mmcblk1: p1
<4>[ 2.669644] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 2.680959] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<6>[ 2.692781] dpram_tty_open:1013 - tty->index = 1
<4>[ 2.694533] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 2.697379] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 2.703301] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 2.703898] msm_sdcc_setup_vreg : 2 : 0 : level : 1800
<3>[ 2.841636] init: Unable to open persistent property directory /data/property errno: 2
<4>[ 2.845858] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<4>[ 2.862959] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<6>[ 2.974383] EXT4-fs (mmcblk0p16): recovery complete
<6>[ 2.974896] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: (null)
<3>[ 2.983178] enable_store: android_usb: already disabled
<3>[ 2.985971] init: property 'ro.product.manufacturer' doesn't exist while expanding '${ro.product.manufacturer}'
<3>[ 2.986759] init: cannot expand '${ro.product.manufacturer}' while writing to '/sys/class/android_usb/android0/iManufacturer'
<3>[ 2.987544] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
<3>[ 2.988298] init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct'
<6>[ 2.999006] charger:
<6>[ 2.999479] charger: *************** LAST KMSG ***************
<6>[ 3.000186] charger:
<6>[ 3.000813] charger: last_kmsg not found. Cold reset?
<6>[ 3.001219] charger:
<6>[ 3.001928] charger: ************* END LAST KMSG *************
<6>[ 3.002334] charger:
<6>[ 3.012961] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 3.016138] adb_open
<7>[ 3.042678] LCD start lcdc_trebon_panel_off
<4>[ 3.162589] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<3>[ 3.192821] config_lcdc_gpio_table: gpio_tlmm_config(0x41a0)=-5
<7>[ 3.192856] LCD start trebon_disp_powerdown
<4>[ 3.193736] [LCDC_JENA] About to turn off
<4>[ 3.193768] [LCDC_JENA] Already disabled, how did this happen?
<7>[ 3.273059] LCD start lcdc_trebon_panel_on
<7>[ 3.283641] LCD start trebon_disp_powerup
<4>[ 3.283769] ldo19: Failed to create debugfs directory
<4>[ 3.284108] [LCDC_JENA] About to turn on
<4>[ 3.284134] [LCDC_JENA] Enable regulator
<6>[ 3.309899] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[ 3.311518] android_usb gadget: high-speed config #1: android
<6>[ 3.362648] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<7>[ 3.473938] LCD ldi mtpdata: 0 ff 0
<7>[ 3.473969] LCD start trebon_disp_on
<7>[ 3.474001] LCD HW rev is 3, apply 3's init sequence
<7>[ 3.672521] LCD display on cmd : completed
<7>[ 3.672554] LCD_DEVICE is not SMD
<6>[ 3.826653] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 3.829409] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 3.831574] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 3.871548] charger: Disabling backlight
<6>[ 3.873973] charger: Enabling backlight
<6>[ 4.012908]
<6>[ 4.012931] Charger Type: STD DOWNSTREAM PORT
<4>[ 4.162744] charger used greatest stack depth: 5936 bytes left
<4>[ 5.343638] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<6>[ 5.349066] param_init:1803 - param_debug_level : 0x4674AEAF
<4>[ 5.356523] adbd (100): /proc/100/oom_adj is deprecated, please use /proc/100/oom_score_adj instead.
<4>[ 5.622631] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<6>[ 7.176516] charger:
<6>[ 7.177003] charger: *************** LAST KMSG ***************
<6>[ 7.177703] charger:
<6>[ 7.178324] charger: last_kmsg not found. Cold reset?
<6>[ 7.178741] charger:
<6>[ 7.179446] charger: ************* END LAST KMSG *************
<6>[ 7.179851] charger:
<6>[ 7.180249] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 7.316244] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 7.318831] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 7.320859] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 7.363243] charger: Disabling backlight
<6>[ 7.365163] charger: Enabling backlight
<6>[ 7.400461] [BATT] msm_batt_cb_func: RPC_ACCEPTSTAT_SUCCESS !!
<6>[ 7.401358] [BATT] msm_batt_check_event: work !!
<6>[ 7.413299] msm_batt_update_psy_status [BATTERY] Rev05 level : 99, voltage : 4185, temp_ap 250 temp_cp : 260, current_fg : 111 cur_cp :0 status 1battery_temp_adc
<6>[ 7.416096] msm_batt_control_temperature [BATT] battery_temp : 260 temp_adc : 26
<6>[ 7.416828] [BATT] msm_batt_update_psy_status: charger_status= 0, charger_type= 2,battery_status=0, battery_temp_adc=579,chg_current=111, battery_temp=579, health 1status = 1
<4>[ 7.672753] msm_sdcc_setup_vreg : 1 : 1 : level : 2850
<4>[ 7.674388] msm_sdcc_setup_vreg : 1 : 0 : level : 2850
<4>[ 7.712626] msm_sdcc_setup_vreg : 2 : 0 : level : 1800
<4>[ 10.432778] msm_sdcc_setup_vreg : 3 : 1 : level : 1800
<3>[ 10.434941] gpio_tlmm_config(0x00064581, GPIO_CFG_DISABLE) <sdc3_clk> failed: 0
<3>[ 10.435354] pin 88 func 1 dir 1 pull 0 drvstr 3
<4>[ 10.436156] msm_sdcc_setup_vreg : 3 : 0 : level : 1800
<6>[ 12.667681] charger:
<6>[ 12.668469] charger: *************** LAST KMSG ***************
<6>[ 12.668881] charger:
<6>[ 12.669509] charger: last_kmsg not found. Cold reset?
<6>[ 12.670223] charger:
<6>[ 12.670624] charger: ************* END LAST KMSG *************
<6>[ 12.671033] charger:
<6>[ 12.671736] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 12.806299] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 12.808869] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 12.811181] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 12.853238] charger: Disabling backlight
<6>[ 12.855448] charger: Enabling backlight
<6>[ 17.156314] charger:
<6>[ 17.157148] charger: *************** LAST KMSG ***************
<6>[ 17.157858] charger:
<6>[ 17.158488] charger: last_kmsg not found. Cold reset?
<6>[ 17.158899] charger:
<6>[ 17.159594] charger: ************* END LAST KMSG *************
<6>[ 17.159998] charger:
<6>[ 17.160399] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 17.286184] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 17.288756] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 17.291064] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 17.333011] charger: Disabling backlight
<6>[ 17.335208] charger: Enabling backlight
<6>[ 22.637351] charger:
<6>[ 22.638188] charger: *************** LAST KMSG ***************
<6>[ 22.638903] charger:
<6>[ 22.639541] charger: last_kmsg not found. Cold reset?
<6>[ 22.639956] charger:
<6>[ 22.640356] charger: ************* END LAST KMSG *************
<6>[ 22.641058] charger:
<6>[ 22.641454] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 22.776124] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 22.778704] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 22.780718] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 22.822989] charger: Disabling backlight
<6>[ 22.824876] charger: Enabling backlight
<6>[ 27.126544] charger:
<6>[ 27.127381] charger: *************** LAST KMSG ***************
<6>[ 27.127788] charger:
<6>[ 27.128723] charger: last_kmsg not found. Cold reset?
<6>[ 27.129131] charger:
<6>[ 27.129536] charger: ************* END LAST KMSG *************
<6>[ 27.130239] charger:
<6>[ 27.130638] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 27.266091] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 27.268376] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 27.270669] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 27.312941] charger: Disabling backlight
<6>[ 27.314844] charger: Enabling backlight
<6>[ 32.627354] charger:
<6>[ 32.628189] charger: *************** LAST KMSG ***************
<6>[ 32.628599] charger:
<6>[ 32.629231] charger: last_kmsg not found. Cold reset?
<6>[ 32.629946] charger:
<6>[ 32.630343] charger: ************* END LAST KMSG *************
<6>[ 32.631044] charger:
<6>[ 32.631451] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 32.766211] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 32.768778] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 32.771074] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 32.813326] charger: Disabling backlight
<6>[ 32.815224] charger: Enabling backlight
<6>[ 37.116231] charger:
<6>[ 37.117376] charger: *************** LAST KMSG ***************
<6>[ 37.117783] charger:
<6>[ 37.118423] charger: last_kmsg not found. Cold reset?
<6>[ 37.119134] charger:
<6>[ 37.119534] charger: ************* END LAST KMSG *************
<6>[ 37.119939] charger:
<6>[ 37.120638] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 37.246174] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 37.248764] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 37.251074] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 37.293126] charger: Disabling backlight
<6>[ 37.295311] charger: Enabling backlight
<6>[ 37.452449] [BATT] batt_timeover: timer !!
<6>[ 37.453609] [BATT] msm_batt_check_event: work !!
<6>[ 37.466548] msm_batt_update_psy_status [BATTERY] Rev05 level : 100, voltage : 4186, temp_ap 260 temp_cp : 260, current_fg : 105 cur_cp :0 status 1battery_temp_adc
<6>[ 37.469349] msm_batt_control_temperature [BATT] battery_temp : 260 temp_adc : 26
<6>[ 37.470086] [BATT] msm_batt_update_psy_status: charger_status= 0, charger_type= 2,battery_status=0, battery_temp_adc=579,chg_current=105, battery_temp=579, health 1status = 1
<6>[ 42.597411] charger:
<6>[ 42.597903] charger: *************** LAST KMSG ***************
<6>[ 42.598606] charger:
<6>[ 42.599229] charger: last_kmsg not found. Cold reset?
<6>[ 42.599944] charger:
<6>[ 42.600346] charger: ************* END LAST KMSG *************
<6>[ 42.600753] charger:
<6>[ 42.601446] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 42.736284] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 42.738903] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 42.741193] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 42.783161] charger: Disabling backlight
<6>[ 42.785356] charger: Enabling backlight
<6>[ 47.096364] charger:
<6>[ 47.097194] charger: *************** LAST KMSG ***************
<6>[ 47.097903] charger:
<6>[ 47.098534] charger: last_kmsg not found. Cold reset?
<6>[ 47.098946] charger:
<6>[ 47.099644] charger: ************* END LAST KMSG *************
<6>[ 47.100048] charger:
<6>[ 47.100454] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 47.226326] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 47.228918] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 47.230929] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 47.273333] charger: Disabling backlight
<6>[ 47.275534] charger: Enabling backlight
<6>[ 52.577276] charger:
<6>[ 52.578108] charger: *************** LAST KMSG ***************
<6>[ 52.578821] charger:
<6>[ 52.579456] charger: last_kmsg not found. Cold reset?
<6>[ 52.579873] charger:
<6>[ 52.580276] charger: ************* END LAST KMSG *************
<6>[ 52.580984] charger:
<6>[ 52.581386] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 52.716136] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 52.718718] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 52.720738] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 52.763049] charger: Disabling backlight
<6>[ 52.764946] charger: Enabling backlight
<6>[ 57.066251] charger:
<6>[ 57.067086] charger: *************** LAST KMSG ***************
<6>[ 57.067498] charger:
<6>[ 57.068438] charger: last_kmsg not found. Cold reset?
<6>[ 57.068853] charger:
<6>[ 57.069251] charger: ************* END LAST KMSG *************
<6>[ 57.069954] charger:
<6>[ 57.070354] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 57.196071] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 57.198344] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 57.200633] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 57.243008] charger: Disabling backlight
<6>[ 57.244903] charger: Enabling backlight
<6>[ 62.547356] charger:
<6>[ 62.548496] charger: *************** LAST KMSG ***************
<6>[ 62.548904] charger:
<6>[ 62.549541] charger: last_kmsg not found. Cold reset?
<6>[ 62.550259] charger:
<6>[ 62.550661] charger: ************* END LAST KMSG *************
<6>[ 62.551369] charger:
<6>[ 62.551768] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 62.686249] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 62.688821] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 62.691124] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 62.733471] charger: Disabling backlight
<6>[ 62.735363] charger: Enabling backlight
<6>[ 67.036311] charger:
<6>[ 67.037153] charger: *************** LAST KMSG ***************
<6>[ 67.037866] charger:
<6>[ 67.038501] charger: last_kmsg not found. Cold reset?
<6>[ 67.039218] charger:
<6>[ 67.039616] charger: ************* END LAST KMSG *************
<6>[ 67.040014] charger:
<6>[ 67.040708] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 67.166199] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 67.168809] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 67.171106] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 67.213174] charger: Disabling backlight
<6>[ 67.215371] charger: Enabling backlight
<6>[ 67.532456] [BATT] batt_timeover: timer !!
<6>[ 67.533426] [BATT] msm_batt_check_event: work !!
<6>[ 67.546713] msm_batt_update_psy_status [BATTERY] Rev05 level : 100, voltage : 4186, temp_ap 260 temp_cp : 260, current_fg : 101 cur_cp :0 status 1battery_temp_adc
<6>[ 67.549519] msm_batt_control_temperature [BATT] battery_temp : 260 temp_adc : 26
<6>[ 67.550251] [BATT] msm_batt_update_psy_status: charger_status= 0, charger_type= 2,battery_status=0, battery_temp_adc=578,chg_current=101, battery_temp=578, health 1status = 1
<6>[ 72.517239] charger:
<6>[ 72.517738] charger: *************** LAST KMSG ***************
<6>[ 72.518446] charger:
<6>[ 72.519071] charger: last_kmsg not found. Cold reset?
<6>[ 72.519781] charger:
<6>[ 72.520174] charger: ************* END LAST KMSG *************
<6>[ 72.520581] charger:
<6>[ 72.520976] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 72.656383] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 72.658963] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 72.661288] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 72.703249] charger: Disabling backlight
<6>[ 72.705438] charger: Enabling backlight
<6>[ 78.007501] charger:
<6>[ 78.008338] charger: *************** LAST KMSG ***************
<6>[ 78.009043] charger:
<6>[ 78.009674] charger: last_kmsg not found. Cold reset?
<6>[ 78.010089] charger:
<6>[ 78.010788] charger: ************* END LAST KMSG *************
<6>[ 78.011193] charger:
<6>[ 78.011591] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 78.146279] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 78.148871] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 78.150881] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 78.193194] charger: Disabling backlight
<6>[ 78.195089] charger: Enabling backlight
<6>[ 82.124793] rmt_storage_event_open_cb: open callback received
<6>[ 82.125609] open partition /boot/modem_fs1 handle=1
<6>[ 82.128213] rmt_storage_event_user_data_cb: send user data callback received
<6>[ 82.130498] rmt_storage_event_open_cb: open callback received
<6>[ 82.131206] open partition /boot/modem_fs2 handle=2
<6>[ 82.135389] rmt_storage_event_user_data_cb: send user data callback received
<6>[ 82.137754] rmt_storage_event_write_iovec_cb: write iovec callback received
<6>[ 82.496284] charger:
<6>[ 82.496761] charger: *************** LAST KMSG ***************
<6>[ 82.497169] charger:
<6>[ 82.497794] charger: last_kmsg not found. Cold reset?
<6>[ 82.498511] charger:
<6>[ 82.498911] charger: ************* END LAST KMSG *************
<6>[ 82.499609] charger:
<6>[ 82.500006] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 82.626186] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 82.628751] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 82.631066] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 82.673188] charger: Disabling backlight
<6>[ 82.675074] charger: Enabling backlight
<6>[ 87.977176] charger:
<6>[ 87.978318] charger: *************** LAST KMSG ***************
<6>[ 87.978726] charger:
<6>[ 87.979349] charger: last_kmsg not found. Cold reset?
<6>[ 87.980061] charger:
<6>[ 87.980456] charger: ************* END LAST KMSG *************
<6>[ 87.980858] charger:
<6>[ 87.981556] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 88.116061] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 88.118663] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 88.120981] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 88.162978] charger: Disabling backlight
<6>[ 88.165163] charger: Enabling backlight
<6>[ 92.466461] charger:
<6>[ 92.467294] charger: *************** LAST KMSG ***************
<6>[ 92.467999] charger:
<6>[ 92.468624] charger: last_kmsg not found. Cold reset?
<6>[ 92.469326] charger:
<6>[ 92.469723] charger: ************* END LAST KMSG *************
<6>[ 92.470123] charger:
<6>[ 92.470523] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 92.596188] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 92.598744] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 92.601043] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 92.642976] charger: Disabling backlight
<6>[ 92.645189] charger: Enabling backlight
<6>[ 97.612559] [BATT] batt_timeover: timer !!
<6>[ 97.613443] [BATT] msm_batt_check_event: work !!
<6>[ 97.626303] msm_batt_update_psy_status [BATTERY] Rev05 level : 100, voltage : 4186, temp_ap 260 temp_cp : 260, current_fg : 100 cur_cp :0 status 1battery_temp_adc
<6>[ 97.629116] msm_batt_control_temperature [BATT] battery_temp : 260 temp_adc : 26
<6>[ 97.629849] [BATT] msm_batt_update_psy_status: charger_status= 0, charger_type= 2,battery_status=0, battery_temp_adc=578,chg_current=100, battery_temp=578, health 1status = 1
<6>[ 97.947079] charger:
<6>[ 97.947568] charger: *************** LAST KMSG ***************
<6>[ 97.948274] charger:
<6>[ 97.948911] charger: last_kmsg not found. Cold reset?
<6>[ 97.949326] charger:
<6>[ 97.950021] charger: ************* END LAST KMSG *************
<6>[ 97.950421] charger:
<6>[ 97.950813] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 98.086198] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 98.088809] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 98.090813] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 98.133129] charger: Disabling backlight
<6>[ 98.135309] charger: Enabling backlight
<6>[ 102.436374] charger:
<6>[ 102.437199] charger: *************** LAST KMSG ***************
<6>[ 102.437911] charger:
<6>[ 102.438536] charger: last_kmsg not found. Cold reset?
<6>[ 102.438948] charger:
<6>[ 102.439349] charger: ************* END LAST KMSG *************
<6>[ 102.440053] charger:
<6>[ 102.440456] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 102.566216] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 102.568806] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 102.570819] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 102.612989] charger: Disabling backlight
<6>[ 102.614904] charger: Enabling backlight
<6>[ 107.917664] charger:
<6>[ 107.918504] charger: *************** LAST KMSG ***************
<6>[ 107.918913] charger:
<6>[ 107.919839] charger: last_kmsg not found. Cold reset?
<6>[ 107.920248] charger:
<6>[ 107.920651] charger: ************* END LAST KMSG *************
<6>[ 107.921349] charger:
<6>[ 107.921753] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 108.056353] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 108.058613] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 108.060918] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 108.103641] charger: Disabling backlight
<6>[ 108.105526] charger: Enabling backlight
<6>[ 112.406258] charger:
<6>[ 112.407094] charger: *************** LAST KMSG ***************
<6>[ 112.407504] charger:
<6>[ 112.408139] charger: last_kmsg not found. Cold reset?
<6>[ 112.408854] charger:
<6>[ 112.409253] charger: ************* END LAST KMSG *************
<6>[ 112.409956] charger:
<6>[ 112.410358] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 112.536284] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 112.538838] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 112.541144] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 112.583334] charger: Disabling backlight
<6>[ 112.585224] charger: Enabling backlight
<6>[ 117.887619] charger:
<6>[ 117.888466] charger: *************** LAST KMSG ***************
<6>[ 117.888871] charger:
<6>[ 117.889501] charger: last_kmsg not found. Cold reset?
<6>[ 117.890219] charger:
<6>[ 117.890618] charger: ************* END LAST KMSG *************
<6>[ 117.891026] charger:
<6>[ 117.891726] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 118.026159] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 118.028758] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 118.031059] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 118.073138] charger: Disabling backlight
<6>[ 118.075339] charger: Enabling backlight
<6>[ 122.376326] charger:
<6>[ 122.377164] charger: *************** LAST KMSG ***************
<6>[ 122.377878] charger:
<6>[ 122.378511] charger: last_kmsg not found. Cold reset?
<6>[ 122.378928] charger:
<6>[ 122.379633] charger: ************* END LAST KMSG *************
<6>[ 122.380036] charger:
<6>[ 122.380434] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 122.506183] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 122.508763] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 122.510753] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 122.553038] charger: Disabling backlight
<6>[ 122.555244] charger: Enabling backlight
<6>[ 127.692708] [BATT] batt_timeover: timer !!
<6>[ 127.693746] [BATT] msm_batt_check_event: work !!
<6>[ 127.706649] msm_batt_update_psy_status [BATTERY] Rev05 level : 100, voltage : 4186, temp_ap 260 temp_cp : 260, current_fg : 97 cur_cp :0 status 1battery_temp_adc
<6>[ 127.709443] msm_batt_control_temperature [BATT] battery_temp : 260 temp_adc : 26
<6>[ 127.710168] [BATT] msm_batt_update_psy_status: charger_status= 0, charger_type= 2,battery_status=0, battery_temp_adc=577,chg_current=97, battery_temp=577, health 1status = 1
<6>[ 127.856934] charger:
<6>[ 127.857423] charger: *************** LAST KMSG ***************
<6>[ 127.858131] charger:
<6>[ 127.858758] charger: last_kmsg not found. Cold reset?
<6>[ 127.859173] charger:
<6>[ 127.859873] charger: ************* END LAST KMSG *************
<6>[ 127.860273] charger:
<6>[ 127.860669] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 127.996196] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 127.998789] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 128.000804] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 128.043146] charger: Disabling backlight
<6>[ 128.045029] charger: Enabling backlight
<6>[ 132.356141] charger:
<6>[ 132.356978] charger: *************** LAST KMSG ***************
<6>[ 132.357686] charger:
<6>[ 132.358319] charger: last_kmsg not found. Cold reset?
<6>[ 132.358731] charger:
<6>[ 132.359129] charger: ************* END LAST KMSG *************
<6>[ 132.359829] charger:
<6>[ 132.360233] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 132.486176] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 132.488468] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 132.490778] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 132.533139] charger: Disabling backlight
<6>[ 132.535021] charger: Enabling backlight
<6>[ 137.836961] charger:
<6>[ 137.837794] charger: *************** LAST KMSG ***************
<6>[ 137.838201] charger:
<6>[ 137.839128] charger: last_kmsg not found. Cold reset?
<6>[ 137.839541] charger:
<6>[ 137.839938] charger: ************* END LAST KMSG *************
<6>[ 137.840643] charger:
<6>[ 137.841046] charger: --------------- STARTING CHARGER MODE ---------------
<6>[ 137.976164] charger: power supply ac (Mains) offline (action=add num_online=0 num_supplies=1)
<6>[ 137.978766] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
<6>[ 137.981108] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
<6>[ 138.023481] charger: Disabling backlight
<6>[ 138.025369] charger: Enabling backlight
<3>[ 142.095699]
<3>[ 142.095724] SMSM: Modem SMSM state changed to SMSM_RESET.
<3>[ 142.098073] Notify: start reset
<6>[ 142.326013] charger:
<6>[ 142.326484] charger: *************** LAST KMSG ***************
<6>[ 142.327193] charger:
<6>[ 142.327821] charger: last_kmsg not found. Cold reset?
<6>[ 142.328539] charger:
<6>[ 142.328941] charger: ************* END LAST KMSG *************
<6>[ 142.329348] charger:
<6>[ 142.330048] charger: --------------- STARTING CHARGER MODE ---------------
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment