2007-2018 Jeep Wrangler Unlimited (JK), 4-door
- 3" lift
- Teraflex Falcon Nexus EF 2.2 Fast Adjust steering stabilizer
- Product page (JK, 1 3/8" stock tie rod)
- Product page (JK, 1 5/8" HD tie rod)
- 3-position fast-adjust knob (soft / medium / firm)
- Teraflex Falcon SP2 3.3 Fast Adjust piggyback shocks, front & rear, rear skid plate
- Product page (JK 4dr, 3-4.5" lift)
- 3-position fast-adjust knob + 8-position micro-adjust dial
- Teraflex HD forged adjustable front track bar
- MetalCloak Duroflex control arms, front & rear
- MetalCloak Durotrak rear track bar
- MetalCloak tie rod and drag link
- Dana 30 front, 4.56 gears, Eaton Detroit Truetrac limited slip
- Dana 44 rear, 4.56 gears, Eaton E-Locker
- Dynatrac ProGrip big brake system, front & rear
- Product page
- 13.50" front rotors, 14.25" rear, reuses factory calipers, no hydraulic bleed needed
- 17x8.5 Method Race Wheels MR701 Bead Grip, 5x5, 0mm offset, matte black (5 total)
- 35x11.50R17LT Falken Wildpeak A/T4W (5 total), 118R, load range C
- Falken product page
- Size listing (PN 28847336)
- 3-Peak Mountain Snowflake rated
- 1/2" black closed-end lug nuts
- UVS7051 TPMS sensors (5)
- Superwinch Tiger Shark 9500SR, 9,500 lb, synthetic rope
- Rough Country MLC-6 multiple light controller
- Product page (JK-specific, PN 70962)
- 6 switched circuits, 40A relays, built-in low-voltage cutoff
- KC HiLiTES 7" Gravity LED Pro headlights, DOT
- KC HiLiTES 4" Gravity LED G4 fog lights, amber, SAE/ECE
- KC HiLiTES Cyclone V2 LED rock lights
- KC HiLiTES FLEX ERA 3, combo beam, with amber shields
- MetalCloak Frame-Built front bumper #1501 (base + winch guard + light caps)
- Rugged Ridge XHD rock sliders
- Smittybilt Pivot HD tire carrier
- Smittybilt Atlas door steps
- Mopar hard top headliner kit
- Product page (JK 4-door)
- PN 82212464AC ('11-'18), PN 82212382AB ('07-'10)
- Power Tank 10 lb CO2 system
- Power Tank 10 lb collection
- 45 cfm regulator, good for 35"+ tires
- Custom 4-tire manifold, inflates / deflates all four to the same PSI at once
- AEV snorkel with Ram Air (brand new)
- K&N drop-in replacement air filter
- Pypes high-ground-clearance cat-back exhaust, 409 stainless
Complete Rhino-Rack system, three parts:
- Platform: Pioneer Platform 72" x 56", PN 42108F (flat-pack / unassembled)
- Product page (72" x 56")
- Unassembled variant
- Aluminum + reinforced nylon corners, ~42 lb, T-slot accessory mounting
- Mounts: RLCP legs (6)
- Rhino-Rack legs, covers & backbones spares
- 2 legs per crossbar
- Vehicle interface: Backbone mounting system for JK hardtop, PN RJKB1
- Product page
- Internal structure, 3 plates per side through the hardtop, tied into the interior frame
- Rated up to 264 lb (120 kg)
- Combined kit (platform + backbone + legs): Rhino Adventure Gear
- Wheels: previously listed as Fuel DD551 Trophy. Updated to Method MR701 per purchase records. Confirm which is currently mounted.
- Lift brand/kit: only "3" lift" recorded. Springs and kit maker not identified. MetalCloak Game Changer or Teraflex?
- MetalCloak part numbers: control arm / track bar / steering links are linked to product families, not exact SKUs. Worth pinning down from receipts.
- Rock sliders: JK 4-door XHD assumed (PN 11504.18). Verify vs. 11504.17.
- Headliner PN: 82212464AC vs 82212382AB depends on model year.
- Pioneer Platform PN 42108F: Rhino-Rack currently lists 42108B / 42108BF / 52108F for the 72" x 56". Likely a superseded or flat-pack SKU.