Last active
December 21, 2015 01:39
-
-
Save Jerry-Fix/6229042 to your computer and use it in GitHub Desktop.
broadcom 5720 tg3 info
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
01:00.0 0200: 14e4:165f | |
Subsystem: 1028:1f5b | |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0, Cache Line Size: 64 bytes | |
Interrupt: pin A routed to IRQ 15 | |
Region 0: Memory at d91a0000 (64-bit, prefetchable) [size=64K] | |
Region 2: Memory at d91b0000 (64-bit, prefetchable) [size=64K] | |
Region 4: Memory at d91c0000 (64-bit, prefetchable) [size=64K] | |
Expansion ROM at dc800000 [disabled] [size=256K] | |
Capabilities: [48] Power Management version 3 | |
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- | |
Capabilities: [50] Vital Product Data | |
Product Name: Broadcom NetXtreme Gigabit Ethernet | |
Read-only fields: | |
[PN] Part number: BCM95720 | |
[MN] Manufacture ID: 31 30 32 38 | |
[V0] Vendor specific: FFV7.2.20 | |
[V1] Vendor specific: DSV1028VPDR.VER1.0 | |
[V2] Vendor specific: NPY2 | |
[V3] Vendor specific: PMT1 | |
[V4] Vendor specific: NMVBroadcom Corp | |
[V5] Vendor specific: DTINIC | |
[V6] Vendor specific: DCM1001008d452101008d45 | |
[RV] Reserved: checksum good, 234 byte(s) reserved | |
End | |
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ | |
Address: 0000000000000000 Data: 0000 | |
Capabilities: [a0] MSI-X: Enable- Count=17 Masked- | |
Vector table: BAR=4 offset=00000000 | |
PBA: BAR=4 offset=00001000 | |
Capabilities: [ac] Express (v2) Endpoint, MSI 00 | |
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us | |
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ | |
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ | |
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop- FLReset- | |
MaxPayload 256 bytes, MaxReadReq 2048 bytes | |
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- | |
LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Latency L0 <1us, L1 <2us | |
ClockPM+ Surprise- LLActRep- BwNot- | |
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ | |
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | |
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ | |
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- | |
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB | |
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- | |
Compliance De-emphasis: -6dB | |
LnkSta2: Current De-emphasis Level: -6dB | |
Capabilities: [100] Advanced Error Reporting | |
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol- | |
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ | |
CEMsk: RxErr- BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+ | |
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- | |
Capabilities: [13c] Device Serial Number 00-00-90-b1-1c-09-b8-1a | |
Capabilities: [150] Power Budgeting <?> | |
Capabilities: [160] Virtual Channel <?> | |
Capabilities: [230] Transaction Processing Hints | |
Interrupt vector mode supported | |
Steering table in MSI-X table | |
Kernel driver in use: tg3 | |
Kernel modules: tg3 | |
# lspci -nnvvv | |
02:00.0 ethernet controller [0200]: broadcom corporation netxtreme bcm5720 gigabit ethernet pcie [14e4:165f] | |
subsystem: dell device [1028:04f8] | |
control: i/o- mem+ busmaster+ speccycle- memwinv- vgasnoop- parerr- stepping- serr- fastb2b- disintx+ | |
status: cap+ 66mhz- udf- fastb2b- parerr- devsel=fast >tabort- <tabort- <mabort- >serr- <perr- intx- | |
latency: 0, cache line size: 64 bytes | |
interrupt: pin a routed to irq 16 | |
region 0: memory at d90a0000 (64-bit, prefetchable) [size=64k] | |
region 2: memory at d90b0000 (64-bit, prefetchable) [size=64k] | |
region 4: memory at d90c0000 (64-bit, prefetchable) [size=64k] | |
expansion rom at dd000000 [disabled] [size=256k] | |
capabilities: [48] power management version 3 | |
flags: pmeclk- dsi- d1- d2- auxcurrent=0ma pme(d0+,d1-,d2-,d3hot+,d3cold+) | |
status: d0 nosoftrst+ pme-enable- dsel=0 dscale=1 pme- | |
capabilities: [50] vital product data | |
product name: broadcom netxtreme gigabit ethernet | |
read-only fields: | |
[pn] part number: bcm95720 | |
[mn] manufacture id: 31 30 32 38 | |
[v0] vendor specific: ffv7.4.8 | |
[v1] vendor specific: dsv1028vpdr.ver1.0 | |
[v2] vendor specific: npy2 | |
[v3] vendor specific: pmt1 | |
[v4] vendor specific: nmvbroadcom corp | |
[v5] vendor specific: dtinic | |
[v6] vendor specific: dcm1001008d452101008d45 | |
[rv] reserved: checksum good, 235 byte(s) reserved | |
end | |
capabilities: [58] msi: enable- count=1/8 maskable- 64bit+ | |
address: 0000000000000000 data: 0000 | |
capabilities: [a0] msi-x: enable+ count=17 masked- | |
vector table: bar=4 offset=00000000 | |
pba: bar=4 offset=00001000 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment