Created
July 16, 2012 00:08
-
-
Save JerrySievert/3119325 to your computer and use it in GitHub Desktop.
Working Node.js on Raspberry Pi
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
These instructions should be deprecated at this point. | |
Start following https://github.com/TooTallNate/node/tree/pi for a more straightforward node installation on the pi. | |
---- | |
These instructions work for the Raspberry Pi running Raspbian (hard float), and include a working NPM: | |
1. Install Raspbian - http://www.raspbian.org/PiscesImages | |
2. sudo apt-get install git-core build-essential | |
3. Check out Node.js source (0.8.4) | |
4. Set up some variables: | |
$ export GYP_DEFINES="armv7=0" | |
$ export CXXFLAGS='-march=armv6 -mfpu=vfp -mfloat-abi=hard -DUSE_EABI_HARDFLOAT' | |
$ export CCFLAGS='-march=armv6 -mfpu=vfp -mfloat-abi=hard -DUSE_EABI_HARDFLOAT' | |
5. Configure correctly: | |
$ ./configure --shared-openssl --without-snapshot | |
$ make | |
$ make test | |
$ make install | |
NOTE: some ssl related tests still have issues, so this is NOT a final fix. |
markdown got me ...
I followed these instructions and I also tried with node-v0.8.9 on raspbian. I also get the Illegal instruction
error. I ran it through gdb and found a little more detail.
Program received signal SIGILL, Illegal instruction.
0x400d64c0 in ?? () from /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0
I did a git clone git://github.com/TooTallNate/node.git
git checkout pi
./configure --shared-openssl --without-snapshot
make
then
make test
[18:44|% 100|+ 444|- 8]: Done
almost 19 minutes later I had all but 8 tests passed, and a 4 of those were timeouts a known issue with a slower system like the pi.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I followed these instructions and I also tried with node-v0.8.9 on raspbian. I also get the
Illegal instruction
error. I ran it through gdb and found a little more detail.Program received signal SIGILL, Illegal instruction.
0x400d64c0 in ?? () from /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0
I did a
git clone git://github.com/TooTallNate/node.git
git checkout pi
./configure --shared-openssl --without-snapshot
make
make test