Jip-Hop · July 18, 2024 21:35 · tprelog · Mar 6, 2022 · Jip-Hop · Mar 6, 2022
diff --git a/boot.sh b/boot.sh
 #!/usr/bin/env bash

 #
 # Enable docker and docker-compose on TrueNAS SCALE (no Kubernetes)
 #
 # This script is a hack! Use it at your own risk!!
 # Using this script to enable Docker is NOT SUPPORTED by ix-systems!
 # You CANNOT use SCALE Apps while using this script!
 #
 # 1  Create a dedicated Docker zvol on one of your zpools: zfs create -V 100G data/_docker
 # 2  Create an ext4 filesystem on your new zvol: mkfs.ext4 /dev/zvol/data/_docker
 # 3  Create a directory where you can mount the ext4 filesystem: mkdir /mnt/data/_docker
 # 4  Save this script somewhere else on your zpool, not in the Docker dataset
 # 5  Edit line 24 and 25 of the script, set paths to the Docker directory and zvol you created
 # 7  If this is NOT the first time you run this script (updating to new location/zvol):
 #     - Check the contents of /etc/fstab, and remove the old # docker-zvol-ext4 rule if it's there
 # 6  You can now start Docker by running the script from the SCALE console
 #
 # For these changes to persist after SCALE reboots and upgrades, run the script at start-up
 #   Schedule this script to run via System Settings -> Advanced -> Init/Shutdown Scripts
 #   Click Add -> Type: Script and choose this script -> When: choose to run as Pre Init

 ## set the path to your docker directory and specify the zvol
 docker_directory='/mnt/data/_docker'
 docker_zvol='/dev/zvol/data/_docker'

 ## this part will add a new fstab rule, if the fstab file doesn't contain our special docker-zvol-ext4 comment
 ## if this is not the first time you run this script, our special comment is already there
 ## so if you ever change the docker_directory and docker_zvol paths in the future, also remove the old
 ## fstab rule and comment from /etc/fstab
 grep -q 'docker-zvol-ext4' /etc/fstab || {
    printf "# docker-zvol-ext4\n${docker_zvol} ${docker_directory} ext4 rw,relatime,stripe=4 0 0\n" >> /etc/fstab
    mount "${docker_directory}" && echo 'Mounted docker directory'
 }

 ## HEREDOC: docker/daemon.json
 read -r -d '' JSON << END_JSON
 {
  "storage-driver": "overlay2",
  "data-root": "${docker_directory}",
  "exec-opts": [
    "native.cgroupdriver=cgroupfs"
  ]
 }
 END_JSON

 ## path to docker daemon file
 docker_daemon='/etc/docker/daemon.json'

 if [ ${EUID} -ne 0 ]; then
  echo "Please run this script as root or using sudo"
 elif [ "$(systemctl is-enabled k3s)" == "enabled" ]; then
  echo "You can not use this script while k3s is enabled"
 elif [ "$(systemctl is-active k3s)" == "active" ]; then
  echo "You can not use this script while k3s is active"
 elif ! which docker &> /dev/null; then
  echo "Docker executable not found"
 elif ! chmod +x /usr/bin/docker-compose &> /dev/null; then
  echo "Failed to make docker-compose executable"
 elif ! install -d -m 755 -- /etc/docker &> /dev/null; then
  echo "Failed to install directory: /etc/docker"
 elif [ ! -d "${docker_directory}" ] ; then
 echo "Directory not found: ${docker_directory}"
 else
  echo "Checking file: ${docker_daemon}"
  if test "${JSON}" != "$(cat ${docker_daemon} 2> /dev/null)"; then
    echo "Updating file: ${docker_daemon}"
    jq -n "${JSON}" > ${docker_daemon}
    if [ "$(systemctl is-active docker)" == "active" ]; then
      echo "Restarting Docker"
      systemctl restart docker
    elif [ "$(systemctl is-enabled docker)" != "enabled" ]; then
      echo "Enable and starting Docker"
      systemctl enable --now docker
    fi
  fi
 fi
	#!/usr/bin/env bash

	#
	# Enable docker and docker-compose on TrueNAS SCALE (no Kubernetes)
	#
	# This script is a hack! Use it at your own risk!!
	# Using this script to enable Docker is NOT SUPPORTED by ix-systems!
	# You CANNOT use SCALE Apps while using this script!
	#
	# 1 Create a dedicated Docker zvol on one of your zpools: zfs create -V 100G data/_docker
	# 2 Create an ext4 filesystem on your new zvol: mkfs.ext4 /dev/zvol/data/_docker
	# 3 Create a directory where you can mount the ext4 filesystem: mkdir /mnt/data/_docker
	# 4 Save this script somewhere else on your zpool, not in the Docker dataset
	# 5 Edit line 24 and 25 of the script, set paths to the Docker directory and zvol you created
	# 7 If this is NOT the first time you run this script (updating to new location/zvol):
	# - Check the contents of /etc/fstab, and remove the old # docker-zvol-ext4 rule if it's there
	# 6 You can now start Docker by running the script from the SCALE console
	#
	# For these changes to persist after SCALE reboots and upgrades, run the script at start-up
	# Schedule this script to run via System Settings -> Advanced -> Init/Shutdown Scripts
	# Click Add -> Type: Script and choose this script -> When: choose to run as Pre Init

	## set the path to your docker directory and specify the zvol
	docker_directory='/mnt/data/_docker'
	docker_zvol='/dev/zvol/data/_docker'

	## this part will add a new fstab rule, if the fstab file doesn't contain our special docker-zvol-ext4 comment
	## if this is not the first time you run this script, our special comment is already there
	## so if you ever change the docker_directory and docker_zvol paths in the future, also remove the old
	## fstab rule and comment from /etc/fstab
	grep -q 'docker-zvol-ext4' /etc/fstab \|\| {
	printf "# docker-zvol-ext4\n${docker_zvol} ${docker_directory} ext4 rw,relatime,stripe=4 0 0\n" >> /etc/fstab
	mount "${docker_directory}" && echo 'Mounted docker directory'
	}

	## HEREDOC: docker/daemon.json
	read -r -d '' JSON << END_JSON
	{
	"storage-driver": "overlay2",
	"data-root": "${docker_directory}",
	"exec-opts": [
	"native.cgroupdriver=cgroupfs"
	]
	}
	END_JSON

	## path to docker daemon file
	docker_daemon='/etc/docker/daemon.json'

	if [ ${EUID} -ne 0 ]; then
	echo "Please run this script as root or using sudo"
	elif [ "$(systemctl is-enabled k3s)" == "enabled" ]; then
	echo "You can not use this script while k3s is enabled"
	elif [ "$(systemctl is-active k3s)" == "active" ]; then
	echo "You can not use this script while k3s is active"
	elif ! which docker &> /dev/null; then
	echo "Docker executable not found"
	elif ! chmod +x /usr/bin/docker-compose &> /dev/null; then
	echo "Failed to make docker-compose executable"
	elif ! install -d -m 755 -- /etc/docker &> /dev/null; then
	echo "Failed to install directory: /etc/docker"
	elif [ ! -d "${docker_directory}" ] ; then
	echo "Directory not found: ${docker_directory}"
	else
	echo "Checking file: ${docker_daemon}"
	if test "${JSON}" != "$(cat ${docker_daemon} 2> /dev/null)"; then
	echo "Updating file: ${docker_daemon}"
	jq -n "${JSON}" > ${docker_daemon}
	if [ "$(systemctl is-active docker)" == "active" ]; then
	echo "Restarting Docker"
	systemctl restart docker
	elif [ "$(systemctl is-enabled docker)" != "enabled" ]; then
	echo "Enable and starting Docker"
	systemctl enable --now docker
	fi
	fi
	fi