Autorun Synology Hyper Backup and Integrity Check with Email Notifications

autorun.sh

#!/bin/sh

# This script is to be used in combination with Synology Autorun:
# - https://github.com/reidemei/synology-autorun
# - https://github.com/Jip-Hop/synology-autorun
#
# You need to change the task_id to match your Hyper Backup task.
# Get it with command: more /usr/syno/etc/synobackup.conf
#
# I like to keep "Beep at start and end" disabled in Autorun, because I don't
# want the NAS to beep after completing (could be in the middle of the night)
# But beep at start is a nice way to confirm the script has started,
# so that's why this script starts with a beep.
#
# After the backup completes, the integrity check will start. 
# Unfortunately in DSM you can't choose to receive email notifications of the integrity check results.
# So there's a little workaround, at the end of this script, to send an (email) notification.
# The results of the integrity check are taken from the synobackup.log file.
#
# In DSM -> Control Panel -> Notification I enabled email notifications,
# I changed its Subject to %TITLE% and the content to:
# Dear user,
#
# Integrity check for %TASK_NAME% is done.
#
# %OUTPUT%
#
# This way I receive email notifications with the results of the Integrity Check.
#
# Credits:
# - https://github.com/Jip-Hop
# - https://bernd.distler.ws/archives/1835-Synology-automatische-Datensicherung-mit-DSM6.html
# - https://www.beatificabytes.be/send-custom-notifications-from-scripts-running-on-a-synology-new/

task_id=6 # Hyper Backup task id, get it with command: more /usr/syno/etc/synobackup.conf
task_name="USB3 3TB Seagate" # Only used for the notification

/bin/echo 2 > /dev/ttyS1 # Beep on start

startTime=$(date +"%Y/%m/%d %H:%M:%S") # Current date and time

device=$2 # e.g. sde1, passed to this script as second argument

# Backup
/usr/syno/bin/synobackup --backup $task_id --type image

while sleep 60 && /var/packages/HyperBackup/target/bin/dsmbackup --running-on-dev $device
do
    :
done

# Check integrity
/var/packages/HyperBackup/target/bin/detect_monitor -k $task_id -t -f -g
# Wait a bit before detect_monitor is up and running
sleep 60
# Wait until check is finished, poll every 60 seconds
/var/packages/HyperBackup/target/bin/detect_monitor -k $task_id -p 60

# Send results of integrity check via email (from last lines of log file)

IFS=''
output=""
title=
NL=$'\n'

while read line
do
    
    # Compute the seconds since epoch for the start date and time
    t1=$(date --date="$startTime" +%s)
    
    # Date and time in log line (second column)
    dt2=$(echo "$line" | cut -d$'\t' -f2)
    # Compute the seconds since epoch for log line date and time
    t2=$(date --date="$dt2" +%s)
    
    # Compute the difference in dates in seconds
    let "tDiff=$t2-$t1"
    
    # echo "Approx diff b/w $startTime & $dt2 = $tDiff"
    
    # Stop reading log lines from before the startTime
    if [[ "$tDiff" -lt 0 ]]; then
        break
    fi
    
    text=`echo "$line" | cut -d$'\t' -f4`
    # Get rid of [Local] prefix
    text=`echo "$text" | sed 's/\[Local\]//'`
    
    if [ -z ${title} ]; then
        title=$text
    fi
    
    output="$output${NL}$text"
    
done <<<$(tac /var/log/synolog/synobackup.log)

# Hijack the ShareSyncError event to send custom message.
# This event is free to reuse because I don't use the Shared Folder Sync (rsync) feature.
# More info on sending custom (email) notifications: https://www.beatificabytes.be/send-custom-notifications-from-scripts-running-on-a-synology-new/
/usr/syno/bin/synonotify "ShareSyncError" "{\"%OUTPUT%\": \"${output}\", \"%TITLE%\": \"${title}\", \"%TASK_NAME%\": \"${task_name}\"}"

# Sleep a bit more before unmounting the disk
sleep 60

# Unmount the disk
exit 100

Sorry but that's exactly the reason I urge you to fork this gist (or create a new one) so you can work on it for your own very special needs. I have no interest in following the conversation any longer but I receive an email for each comment on this gist and I try to reduce the noise in my inbox. I'd prefer not to delete this gist so others may still find it in the future. So please take the development and discussion elsewhere. You can comment the new location here and ask the other participants to join at the new location.

For further discussion on my adapted script please subscribe here:
https://gist.github.com/gersteba/6b07be49aa94c8df1bb88e7db615987d

@Jip-Hop: Sorry for any inconvenience.