Last active
May 22, 2024 19:09
-
-
Save KonradIT/99d887210dec002111e1 to your computer and use it in GitHub Desktop.
GoPro HERO3 Black's interesting executable / wifi configuration / script files, most of them are from /usr/local/share/script
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| cd / | |
| umount /pref | |
| echo 3 > /proc/sys/vm/drop_caches | |
| #wifi mode is specified | |
| if [ "${1}" == "ap" ]; then | |
| echo -e "\nPress CTRL+C now if you want to skip hibernation" | |
| echo "killall hostapd" | |
| killall hostapd | |
| echo "sleep 1" | |
| sleep 1 | |
| elif [ "${1}" == "p2p" ]; then | |
| echo -e "\nPress CTRL+C now if you want to skip hibernation" | |
| echo "killall wpa_supplicant wpa_cli wpa_event.sh" | |
| killall wpa_supplicant wpa_cli wpa_event.sh | |
| echo "sleep 1" | |
| sleep 1 | |
| killall -9 wpa_supplicant wpa_cli wpa_event.sh 2>/dev/null | |
| rm -f /tmp/wpa_p2p_done /tmp/wpa_last_event | |
| fi | |
| echo disk > /sys/power/state | |
| #/pref | |
| mountpref=`cat /proc/mounts |grep "ubi0:pref"` | |
| if [ "${mountpref}" == "" ]; then | |
| mount -t ubifs ubi0:pref /pref | |
| fi | |
| #send AMSG_CMD_BOSS_BOOTED | |
| boot_done | |
| #fix: boss qboot during video recording, wifi needs time to bringup | |
| AR6K=`lsmod | grep ar6` | |
| if [ "${AR6K}" != "" ] && [ -e /sys/bus/sdio/devices/mmc1:0001:1 ]; then | |
| n=0 | |
| ifconfig wlan0 | |
| waitagain=$? | |
| while [ $n -ne 60 ] && [ $waitagain -ne 0 ]; do | |
| n=$(($n + 1)) | |
| echo $n | |
| sleep 1 | |
| ifconfig wlan0 | |
| waitagain=$? | |
| done | |
| fi | |
| #wifi mode is specified, skip auto-detection and recovery | |
| if [ "${1}" == "ap" ]; then | |
| hostapd -B /tmp/hostapd.conf && boot_done 1 2 1 | |
| exit 0 | |
| elif [ "${1}" == "p2p" ]; then | |
| wpa_supplicant -i wlan0 -c /tmp/p2p.conf -D ar6003 -B | |
| wpa_cli -B -a /usr/local/share/script/wpa_event.sh | |
| wpa_cli p2p_set ssid_postfix "_AMBA" | |
| wpa_cli p2p_find | |
| boot_done 1 2 1 | |
| exit 0 | |
| fi | |
| #recover wlan0 softap | |
| hostapd_cmd=`ps www|grep hostapd|grep -v grep|tr -s ' '|cut -d ' ' -f 5-` | |
| if [ "${hostapd_cmd}" != "" ]; then | |
| dnsmasq_cmd=`ps www|grep dnsmasq|grep -v grep|tr -s ' '|cut -d ' ' -f 5-` | |
| killall hostapd; sleep 1 | |
| killall -9 dnsmasq | |
| ${hostapd_cmd} & | |
| if [ "${dnsmasq_cmd}" != "" ]; then | |
| ${dnsmasq_cmd} & | |
| fi | |
| #Wifi Ready on SoftAP mode | |
| #SendToItron 0xf403002c 2 0 | |
| boot_done 1 2 1 | |
| fi | |
| #recover p2p | |
| wpa_event=`ps www|grep wpa_event|grep -v grep` | |
| if [ "${wpa_event}" != "" ]; then | |
| killall wpa_supplicant wpa_cli wpa_event.sh; sleep 1 | |
| killall -9 wpa_supplicant wpa_cli wpa_event.sh 2>/dev/null | |
| rm -f /tmp/wpa_p2p_done /tmp/wpa_last_event | |
| wpa_supplicant -i wlan0 -c /tmp/p2p.conf -D ar6003 -B | |
| wpa_cli -B -a /usr/local/share/script/wpa_event.sh | |
| wpa_cli p2p_set ssid_postfix "_AMBA" | |
| wpa_cli p2p_find | |
| boot_done 1 2 1 | |
| fi | |
| udhcpc_cmd=`ps www|grep udhcpc|grep -v grep|tr -s ' '|cut -d ' ' -f 5-` | |
| if [ "${udhcpc_cmd}" != "" ]; then | |
| killall udhcpc | |
| ${udhcpc_cmd} & | |
| if [ "${wpa_supplicant_cmd}" != "" ]; then | |
| #Wifi Ready on Station mode | |
| SendToItron 0xf403002c 1 0 | |
| fi | |
| fi | |
| #recover eth0 | |
| eth0_up=`ifconfig eth0 | grep "inet addr"` | |
| if [ "${eth0_up}" != "" ]; then | |
| ifconfig eth0 down | |
| ifconfig eth0 up | |
| fi |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| reset_conf() | |
| { | |
| echo "config corrupted, reset wifi.conf" | |
| cp /usr/local/share/script/wifi.conf /pref/wifi.conf | |
| cat /pref/wifi.conf | sed -e 's/$/\r/' > /tmp/fuse_d/MISC/wifi.conf | |
| killall hostapd dnsmasq 2>/dev/null | |
| } | |
| apply_ap_conf() | |
| { | |
| #Load the parameter settings | |
| conf=`cat /pref/wifi.conf | grep -Ev "^#"` | |
| #LOCAL_IP | |
| LOCAL_IP=`echo "${conf}" | grep LOCAL_IP | cut -c 10-` | |
| echo "LOCAL_IP=${LOCAL_IP}" | |
| killall udhcpc | |
| ifconfig wlan0 $LOCAL_IP | |
| if [ $? -ne 0 ]; then | |
| reset_conf | |
| return 1 | |
| fi | |
| route add default gw $LOCAL_IP | |
| #LOCAL_NETMASK | |
| LOCAL_NETMASK=`echo "${conf}" | grep LOCAL_NETMASK | cut -c 15-` | |
| echo "LOCAL_NETMASK=${LOCAL_NETMASK}" | |
| ifconfig wlan0 netmask $LOCAL_NETMASK | |
| if [ $? -ne 0 ]; then | |
| reset_conf | |
| return 1 | |
| fi | |
| #DHCP_IP_START DHCP_IP_END | |
| DHCP_IP_START=`echo "${conf}" | grep DHCP_IP_START | cut -c 15-` | |
| echo "DHCP_IP_START=${DHCP_IP_START}" | |
| DHCP_IP_END=`echo "${conf}" | grep DHCP_IP_END | cut -c 13-` | |
| echo "DHCP_IP_END=${DHCP_IP_END}" | |
| dnsmasq -5 -K -R -n --dhcp-range=$DHCP_IP_START,$DHCP_IP_END,1h | |
| if [ $? -ne 0 ]; then | |
| reset_conf | |
| return 1 | |
| fi | |
| #generate hostapd.conf | |
| echo "interface=wlan0" > /tmp/hostapd.conf | |
| echo "ctrl_interface=/var/run/hostapd" >> /tmp/hostapd.conf | |
| echo "beacon_int=100" >> /tmp/hostapd.conf | |
| echo "dtim_period=1" >> /tmp/hostapd.conf | |
| echo "preamble=0" >> /tmp/hostapd.conf | |
| #AP_SSID | |
| AP_SSID=`echo "${conf}" | grep AP_SSID | cut -c 9-` | |
| echo "AP_SSID=${AP_SSID}" | |
| echo "ssid=${AP_SSID}" >> /tmp/hostapd.conf | |
| #AP_MAXSTA | |
| AP_MAXSTA=`echo "${conf}" | grep AP_MAXSTA | cut -c 11-` | |
| echo "AP_MAXSTA=${AP_MAXSTA}" | |
| echo "max_num_sta=${AP_MAXSTA}" >> /tmp/hostapd.conf | |
| #AP_CHANNEL | |
| AP_CHANNEL=`echo "${conf}" | grep AP_CHANNEL | cut -c 12-` | |
| echo "AP_CHANNEL=${AP_CHANNEL}" | |
| if [ ${AP_CHANNEL} -lt 0 ]; then | |
| reset_conf | |
| return 1 | |
| fi | |
| if [ $AP_CHANNEL -ne 0 ]; then | |
| echo "channel_num=${AP_CHANNEL}" >> /tmp/hostapd.conf | |
| fi | |
| #WEP, WPA, No Security | |
| AP_PUBLIC=`echo "${conf}" | grep AP_PUBLIC | cut -c 11-` | |
| echo "AP_PUBLIC=${AP_PUBLIC}" | |
| AP_WEP=`echo "${conf}" | grep AP_WEP | cut -c 8-` | |
| echo "AP_WEP=${AP_WEP}" | |
| if [ "${AP_PUBLIC}" != "yes" ] && [ "${AP_PUBLIC}" != "Yes" ] && [ "${AP_PUBLIC}" != "YES" ]; then | |
| if [ "${AP_WEP}" != "yes" ] && [ "${AP_WEP}" != "Yes" ] && [ "${AP_WEP}" != "YES" ]; then | |
| #WPA | |
| WPA_VERSION=`echo "${conf}" | grep WPA_VERSION | cut -c 13-` | |
| echo "WPA_VERSION=${WPA_VERSION}" | |
| echo "wpa=${WPA_VERSION}" >> /tmp/hostapd.conf | |
| WPA_PAIRWISE=`echo "${conf}" | grep WPA_PAIRWISE | cut -c 14-` | |
| echo "WPA_PAIRWISE=${WPA_PAIRWISE}" | |
| echo "wpa_pairwise=${WPA_PAIRWISE}" >> /tmp/hostapd.conf | |
| AP_PASSWD=`echo "${conf}" | grep AP_PASSWD | cut -c 11-` | |
| echo "AP_PASSWD=${AP_PASSWD}" | |
| echo "wpa_passphrase=${AP_PASSWD}" >> /tmp/hostapd.conf | |
| echo "wpa_key_mgmt=WPA-PSK" >> /tmp/hostapd.conf | |
| else | |
| #WEP | |
| WEP_DEFAULT_KEY=`echo "${conf}" | grep WEP_DEFAULT_KEY | cut -c 17-` | |
| echo "WEP_DEFAULT_KEY=${WEP_DEFAULT_KEY}" | |
| echo "wep_default_key=${WEP_DEFAULT_KEY}" >> /tmp/hostapd.conf | |
| WEP_KEY0=`echo "${conf}" | grep WEP_KEY0 | cut -c 10-` | |
| echo "WEP_KEY0=${WEP_KEY0}" | |
| echo "wep_key0=${WEP_KEY0}" >> /tmp/hostapd.conf | |
| WEP_KEY1=`echo "${conf}" | grep WEP_KEY1 | cut -c 10-` | |
| echo "WEP_KEY1=${WEP_KEY1}" | |
| echo "wep_key1=${WEP_KEY1}" >> /tmp/hostapd.conf | |
| WEP_KEY2=`echo "${conf}" | grep WEP_KEY2 | cut -c 10-` | |
| echo "WEP_KEY2=${WEP_KEY2}" | |
| echo "wep_key2=${WEP_KEY2}" >> /tmp/hostapd.conf | |
| WEP_KEY3=`echo "${conf}" | grep WEP_KEY3 | cut -c 10-` | |
| echo "WEP_KEY3=${WEP_KEY3}" | |
| echo "wep_key3=${WEP_KEY3}" >> /tmp/hostapd.conf | |
| AUTH_ALGS=`echo "${conf}" | grep AUTH_ALGS | cut -c 11-` | |
| echo "AUTH_ALGS=${AUTH_ALGS}" | |
| echo "auth_algs=${AUTH_ALGS}" >> /tmp/hostapd.conf | |
| fi | |
| fi | |
| hostapd -B /tmp/hostapd.conf | |
| if [ $? -ne 0 ]; then | |
| reset_conf | |
| return 1 | |
| fi | |
| if [ $AP_CHANNEL -eq 0 ]; then | |
| #ACS (Automatic Channel Selection) between 1, 6, 11 | |
| iwconfig wlan0 channel 0 | |
| iwconfig wlan0 commit | |
| fi | |
| #send wifi status update message (Wifi On, AP mode, need to do wifi_postproc) | |
| #SendToItron 0xf403002c 2 1 | |
| boot_done 1 2 1 | |
| return 0 | |
| } | |
| apply_ap_conf | |
| rval=$? | |
| echo -e "rval=${rval}\n" | |
| if [ ${rval} -ne 0 ]; then | |
| killall -9 hostapd dnsmasq 2>/dev/null | |
| apply_ap_conf | |
| fi |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| pid_dnsmasq=`ps | grep dnsmasq | grep -v grep| awk '{print $1;}'` | |
| killall hostapd | |
| kill -9 $pid_dnsmasq |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # Server | |
| # | |
| server!bind!1!port = 80 | |
| server!timeout = 180 | |
| server!keepalive = 1 | |
| server!keepalive_max_requests = 5000 | |
| server!chunked_encoding = 1 | |
| server!server_tokens = full | |
| server!panic_action = /sbin/cherokee-panic | |
| server!pid_file = /var/run/cherokee.pid | |
| # Default virtual server | |
| # | |
| vserver!1!nick = default | |
| #vserver!1!collect_statistics = 0 | |
| vserver!1!document_root = /var/www | |
| vserver!1!directory_index = index.html | |
| vserver!1!rule!1!match = default | |
| vserver!1!rule!1!handler = common | |
| vserver!1!rule!1!handler!iocache = 1 | |
| vserver!1!rule!2!match = directory | |
| vserver!1!rule!2!match!directory = /icons | |
| vserver!1!rule!2!handler = file | |
| vserver!1!rule!2!document_root = /usr/share/cherokee/icons | |
| vserver!1!rule!3!match = directory | |
| vserver!1!rule!3!match!directory = /cherokee_themes | |
| vserver!1!rule!3!document_root = /usr/share/cherokee/themes | |
| vserver!1!rule!3!handler = file | |
| # | |
| # 20120424JY - cgi bin for hd2media and hd2thumbnail | |
| # | |
| vserver!1!rule!4!document_root = /usr/local/gopro/cgi-bin | |
| vserver!1!rule!4!handler = cgi | |
| vserver!1!rule!4!match = directory | |
| vserver!1!rule!4!match!directory = /gp | |
| # Icons | |
| # | |
| vserver!1!rule!1!match = default | |
| vserver!1!rule!1!no_log = 1 | |
| vserver!1!rule!1!only_secure = 0 | |
| icons!default = page_white.png | |
| icons!directory = folder.png | |
| icons!parent_directory = arrow_turn_left.png | |
| icons!suffix!film.png = mp4,ts | |
| icons!suffix!camera.png = jpg,jpeg,jpe | |
| # Mime types | |
| # | |
| mime!image/jpeg!extensions = jpeg,jpg,jpe | |
| mime!video/mp4!extensions = mp4,lrv,MP4,LRV | |
| mime!video/ts!extensions = ts | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| # udhcpc script edited by Tim Riker <[email protected]> | |
| [ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1 | |
| RESOLV_CONF="/etc/resolv.conf" | |
| [ -n "$broadcast" ] && BROADCAST="broadcast $broadcast" | |
| [ -n "$subnet" ] && NETMASK="netmask $subnet" | |
| case "$1" in | |
| deconfig) | |
| /sbin/ifconfig $interface 0.0.0.0 | |
| ;; | |
| renew|bound) | |
| /sbin/ifconfig $interface $ip $BROADCAST $NETMASK | |
| if [ -n "$router" ] ; then | |
| echo "deleting routers" | |
| while route del default gw 0.0.0.0 dev $interface ; do | |
| : | |
| done | |
| for i in $router ; do | |
| route add default gw $i dev $interface | |
| done | |
| fi | |
| echo -n > $RESOLV_CONF | |
| [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF | |
| for i in $dns ; do | |
| echo adding dns $i | |
| echo nameserver $i >> $RESOLV_CONF | |
| done | |
| ;; | |
| esac | |
| exit 0 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| pid_dnsmasq=`ps | grep dnsmasq | grep -v grep| awk '{print $1;}'` | |
| killall hostapd | |
| kill -9 $pid_dnsmasq | |
| rmmod ar6003 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| rmmod ar6003 | |
| insmod /lib/modules/ar6003.ko | |
| sleep 3; | |
| killall udhcpc | |
| ifconfig wlan0 192.168.42.1 | |
| hostapd /tmp/hostapd.conf & | |
| dnsmasq --no-daemon --no-resolv --no-poll --dhcp-range=192.168.42.2,192.168.42.5,1h & |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #==============================================================================# | |
| [global] | |
| media_path=/tmp/fuse_d/DCIM/ | |
| #==============================================================================# | |
| [gpStream] | |
| # Buffer size to read preview ts files. default 400000. TCP Only | |
| buffer_size=400000 | |
| # on = 1, off = 0 | |
| log_level=0 | |
| # TCP or UDP | |
| ip_protocol=UDP | |
| # TCP or UDP port (will be deprecated) | |
| server_port=8554 | |
| # How long camera send ts files without keep alive signal from client (in secs) | |
| keep_alive_threshold=10 | |
| # latest ts file check poll wait in micro sec. default = 5000 | |
| ts_poll_wait=1000 | |
| # Temp setting for testing | |
| client_ip_address=192.168.1.33 | |
| # Deprecated Options | |
| # ts header on: 1/off: 0 (next_seg_no:ts_seg_size). TCP only. | |
| #ts_header=1 | |
| # use mmap or fread & memory | |
| #use_mmap=0 | |
| # use minumum scan and auto increment of segment | |
| #use_minscan=0 | |
| # How often client send keep alive signal to camera (number of ts files) | |
| #keep_alive=10 | |
| #==============================================================================# | |
| [gpMediaCache] | |
| mod=0 | |
| size=1 | |
| # run memcached as | |
| user=root | |
| # file socket for memcached | |
| socket=/tmp/mc.sock | |
| # memcached memory size in MB | |
| cache_size=2 | |
| #==============================================================================# | |
| [gpBroadcaster] | |
| # gpBroadcaster.conf file | |
| # Location: /usr/local/gopro/etc/gpBroadcaster.conf | |
| # | |
| # How many retries if gpBroadcaster does not get oauth token from server | |
| oauth_token_get_retries=3 | |
| # How many retires if gpBroadcaster does not get broadcast token from server | |
| broadcast_token_get_retries=3 | |
| # How many retries if gpBroadcaster is not able to upload ts files to server | |
| # (Not for the same file retries. It always uploads latest ts files) | |
| # Only consecutive failure will result in exiting of gpBroadcaster. | |
| upload_ts_retries=120 | |
| # log off: 0, log on:1, more log:2 | |
| log_level=0 | |
| # Location of OAuth token file | |
| oauth_token_file=/pref/cloud_token | |
| # Curl protocol | |
| curl_protocol=http | |
| # Curl port to bypass BP | |
| curl_port=80 | |
| # Cloud IP address. Leave it blank not to use IP address. | |
| cloud_ip=127.0.0.1 | |
| # Media path to ts files (Do not omit / at the end of path) | |
| media_path=/var/www/live/ | |
| # status 1: on 0: off | |
| status=1 | |
| # Full path to stats file | |
| status_file=/tmp/fuse_d/broadcaster_state.csv | |
| # Number of segments to aggregate in stats before output to a file (default = 8) | |
| status_interval=8 | |
| #==============================================================================# | |
| [gpUploader] | |
| # gpUploader.conf file | |
| # Location: /usr/local/gopro/etc/gpUploader.conf | |
| # | |
| # How many retries if gpBroadcaster does not get oauth token from server | |
| oauth_token_get_retries=3 | |
| # How many retires if gpBroadcaster does not get broadcast token from server | |
| broadcast_token_get_retries=3 | |
| # How many retries if gpBroadcaster is not able to upload ts files to server | |
| # (Not for the same file retries. It always uploads latest ts files) | |
| # Only consecutive failure will result in exiting of gpBroadcaster. | |
| upload_ts_retries=120 | |
| # log off: 0, log on:1, more log:2 | |
| log_level=0 | |
| # Location of OAuth token file | |
| oauth_token_file=/pref/cloud_token | |
| # Curl protocol | |
| curl_protocol=http | |
| # Curl port to bypass BP | |
| curl_port=80 | |
| # Cloud Upload URL | |
| cloud_upload_url=api.sandbox.staging.gopro.com/v1/tickets | |
| # Upload queue file location (Do not omit / at the end of path) | |
| #upload_queue_path=/tmp/fuse_d/MISC/ | |
| upload_queue_path=/pref/ | |
| # gpUploader upload history file location (Do not omit / at the end of path) | |
| upload_history_path=/tmp/fuse_d/MISC/ | |
| # gpUploader idle temp file | |
| gpuploader_idle_file=/tmp/gpuploader_idle_file | |
| #==============================================================================# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| <script type="text/JavaScript"> | |
| <!-- | |
| var newImage = new Image(); | |
| newImage.src = "./amba.jpg?ts=1"; | |
| num = 1; | |
| function reloadImage() | |
| { | |
| if(newImage.complete) { | |
| document.viewfinder.src = newImage.src; | |
| newImage = new Image(); | |
| newImage.src = "./amba.jpg?ts=" + new Date().getTime(); | |
| } | |
| setTimeout(reloadImage, 66); | |
| } | |
| --> | |
| </script> | |
| <html> | |
| <head> | |
| </head> | |
| <body onload="JavaScript:reloadImage()"> | |
| <img src="./amba.jpg?ts=0" name="viewfinder" /> | |
| </body> | |
| </html> |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| mkdir -p /oem | |
| # mtd12 (add partition) | |
| MTDNUM=$(cat /proc/mtd | grep add | awk -F':' '{print $1}' | sed 's/mtd//') | |
| ubiattach /dev/ubi_ctrl -m ${MTDNUM} | |
| mount -t ubifs ubi1:oem /oem | |
| chroot /oem mount -t proc none /proc | |
| chroot /oem | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| device_name=`cat /pref/wifi.conf | grep -Ev "^#" | grep P2P_DEVICE_NAME | cut -c 17- | tr ' ' '-'` | |
| if [ "${device_name}" == "" ]; then | |
| postmac=`ifconfig wlan0 | grep HWaddr | awk '{print $NF}' | sed 's/://g' | cut -c 6- | tr 'A-Z' 'a-z'` | |
| device_name=amba-${postmac} | |
| fi | |
| echo "device_name=${device_name}" > /tmp/p2p.conf | |
| echo "ctrl_interface=/var/run/wpa_supplicant" >> /tmp/p2p.conf | |
| echo "device_type=6-0050F204-1" >> /tmp/p2p.conf | |
| echo "config_methods=display push_button keypad" >> /tmp/p2p.conf | |
| wpa_supplicant -i wlan0 -c /tmp/p2p.conf -D ar6003 -B | |
| wpa_cli -B -a /usr/local/share/script/wpa_event.sh | |
| wpa_cli p2p_set ssid_postfix "_AMBA" | |
| wpa_cli p2p_find | |
| boot_done 1 2 1 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| killall -9 cherokee-worker | |
| #cherokee-worker -a -C /etc/cherokee.conf -j -d | |
| . /tmp/start_webserver.sh |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| SSID=`cat /pref/wifi.conf | grep -Ev "^#" | grep ESSID | cut -c 7-` | |
| PSK=`cat /pref/wifi.conf | grep -Ev "^#" | grep PASSWORD | cut -c 10-` | |
| echo "$@" > /dev/console | |
| WPA_SCAN () | |
| { | |
| wpa_supplicant -Dwext -iwlan0 -C /var/run/wpa_supplicant -B | |
| wpa_cli scan | |
| sleep 3 | |
| scan_result=`wpa_cli scan_r` | |
| killall wpa_supplicant | |
| echo "${scan_result}" > /dev/console | |
| } | |
| WPA_SCAN | |
| scan_entry=`echo "${scan_result}" | tr '\t' ' ' | grep " ${SSID}$" | tail -n 1` | |
| if [ "${scan_entry}" == "" ]; then | |
| echo "failed to detect SSID ${SSID}, please try to get close to the AP" > /dev/console | |
| exit 1 | |
| fi | |
| echo "ctrl_interface=/var/run/wpa_supplicant" > /tmp/wpa_supplicant.conf | |
| echo "network={" >> /tmp/wpa_supplicant.conf | |
| echo "ssid=\"${SSID}\"" >> /tmp/wpa_supplicant.conf | |
| WEP=`echo "${scan_entry}" | grep WEP` | |
| WPA=`echo "${scan_entry}" | grep WPA` | |
| WPA2=`echo "${scan_entry}" | grep WPA2` | |
| CCMP=`echo "${scan_entry}" | grep CCMP` | |
| TKIP=`echo "${scan_entry}" | grep TKIP` | |
| if [ "${WPA}" != "" ]; then | |
| #WPA2-PSK-CCMP (11n requirement) | |
| #WPA-PSK-CCMP | |
| #WPA2-PSK-TKIP | |
| #WPA-PSK-TKIP | |
| echo "key_mgmt=WPA-PSK" >> /tmp/wpa_supplicant.conf | |
| if [ "${WPA2}" != "" ]; then | |
| echo "proto=WPA2" >> /tmp/wpa_supplicant.conf | |
| else | |
| echo "proto=WPA" >> /tmp/wpa_supplicant.conf | |
| fi | |
| if [ "${CCMP}" != "" ]; then | |
| echo "pairwise=CCMP" >> /tmp/wpa_supplicant.conf | |
| else | |
| echo "pairwise=TKIP" >> /tmp/wpa_supplicant.conf | |
| fi | |
| echo "psk=\"${PSK}\"" >> /tmp/wpa_supplicant.conf | |
| fi | |
| if [ "${WEP}" != "" ] && [ "${WPA}" == "" ]; then | |
| echo "key_mgmt=NONE" >> /tmp/wpa_supplicant.conf | |
| echo "wep_key0=${PSK}" >> /tmp/wpa_supplicant.conf | |
| echo "wep_tx_keyidx=0" >> /tmp/wpa_supplicant.conf | |
| fi | |
| if [ "${WEP}" == "" ] && [ "${WPA}" == "" ]; then | |
| echo "key_mgmt=NONE" >> /tmp/wpa_supplicant.conf | |
| fi | |
| echo "}" >> /tmp/wpa_supplicant.conf | |
| killall -9 wpa_supplicant 2>/dev/null | |
| wpa_supplicant -Dwext -iwlan0 -c/tmp/wpa_supplicant.conf -B |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # setup_preview.sh | |
| # | |
| # 20121112JY - move preview setup code to script out of uI code | |
| ifconfig usb0 up | |
| ifconfig usb0 10.9.9.1 netmask 255.255.255.0 | |
| route add default gw 10.9.9.9 | |
| mount --bind /tmp/fuse/live /var/www/live | |
| # mount --bind /tmp/fuse_d /var/www/videos | |
| # mount --bind /tmp/fuse/shutter /var/www/shutter | |
| cherokee-worker -a -C /usr/local/gopro/etc/cherokee.conf & | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| if [ -f /tmp/fuse_d/MISC/tcp_tuner.sh ]; then | |
| /bin/sh /tmp/fuse_d/MISC/tcp_tuner.sh | |
| fi |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| echo "AMBA TCP Stack Parameters" | |
| ifconfig wlan0 txqueuelen 10000 | |
| #echo 10777216 > /proc/sys/net/core/rmem_max | |
| echo 16777216 > /proc/sys/net/core/rmem_max | |
| echo 16777216 > /proc/sys/net/core/wmem_max | |
| #echo '4096 87380 10777216' > /proc/sys/net/ipv4/tcp_rmem | |
| echo '4096 87380 16777216' > /proc/sys/net/ipv4/tcp_rmem | |
| echo '4096 87380 16777216' > /proc/sys/net/ipv4/tcp_wmem | |
| echo 8000 > /proc/sys/net/core/netdev_max_backlog | |
| echo 0 > /proc/sys/net/ipv4/tcp_timestamps | |
| echo 0 > /proc/sys/net/ipv4/tcp_keepalive_probes | |
| echo 0 > /proc/sys/net/ipv4/tcp_sack |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ##### Wifi configuration file ########################################## | |
| ## Empty lines and lines starting with # are ignored | |
| # ap: SoftAP mode | |
| # sta: Station mode | |
| # p2p: Enable Wifi Direct Support for peer-to-peer connectibity | |
| WIFI_MODE=ap | |
| ##### STA mode configuration ########################################## | |
| # SSID | |
| ESSID=amba_boss | |
| # Passphrase. Leave empty at no security mode | |
| PASSWORD=1234567890 | |
| ##### Wifi Direct configuration ########################################## | |
| # Find devices with correct name prefix and automatically connect at startup | |
| P2P_AUTO_CONNECT=yes | |
| # Auto-connect with devices if the name prefix matches | |
| P2P_CONNECT_PREFIX=amba | |
| # Do not enable this optional field unless you are certain, please provide a unique name amoung multiple devices to prevent confusion | |
| #P2P_DEVICE_NAME=amba-1 | |
| ##### SoftAP configuration ########################################## | |
| # SSID (1 ~ 32 characters) | |
| AP_SSID=amba_boss | |
| # IP address | |
| LOCAL_IP=192.168.42.1 | |
| # IP subnet mask | |
| LOCAL_NETMASK=255.255.255.0 | |
| # IP pool starting address of DHCP server | |
| DHCP_IP_START=192.168.42.2 | |
| # IP pool end address of DHCP server | |
| DHCP_IP_END=192.168.42.6 | |
| # Wifi channel number, set 0 to use Auto Channel Selection | |
| AP_CHANNEL=0 | |
| # Maximum number of stations allowed in station table | |
| AP_MAXSTA=5 | |
| # If you say yes here, all WPA/WEP settings will be ignored | |
| AP_PUBLIC=no | |
| # WPA Passphrase (8 ~ 63 characters) | |
| AP_PASSWD=1234567890 | |
| ##### Advanced WPA configuration ########################################## | |
| ## Do not modify this section unless you are certain | |
| # This is a bit field, bit0 = WPA, bit1 = WPA2 | |
| WPA_VERSION=2 | |
| # This is a space separated list of encryption algorithms, TKIP CCMP | |
| WPA_PAIRWISE=CCMP | |
| ##### Advanced WEP configuration ########################################## | |
| ## Do not modify this section unless you are certain | |
| # If you say yes here, AP_PASSWD, WPA_VERSION, WPA_PAIRWISE will be ignored | |
| AP_WEP=no | |
| # Bit fields of allowed authentication algorithms, bit 0 = Open System, bit 1 = Shared Key | |
| AUTH_ALGS=1 | |
| # The key number to use when transmitting. It must be between 0 and 3, and the corresponding key must be set. | |
| WEP_DEFAULT_KEY=0 | |
| # A key may be a quoted string (5 or 13 characters) or unquoted hexadecimal digits (10 or 26 digits), depending on whether 64-bit or 128-bit WEP is used | |
| WEP_KEY0=1234567890 | |
| WEP_KEY1="vwxyz" | |
| WEP_KEY2=0102030405060708090a0b0c0d | |
| WEP_KEY3=".2.4.6.8.0.23" |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| #sync config | |
| card_config=0 | |
| if [ -e /tmp/fuse_d/MISC/wifi.conf ]; then | |
| card_config=1 | |
| echo "==> Load wifi.conf from SD/MISC..." | |
| cat /tmp/fuse_d/MISC/wifi.conf | sed -e 's/\r$//' > /pref/wifi.conf | |
| elif [ -e /tmp/fuse_d/misc/wifi.conf ]; then | |
| card_config=2 | |
| echo "==> Load wifi.conf from SD/MISC..." | |
| cat /tmp/fuse_d/misc/wifi.conf | sed -e 's/\r$//' > /pref/wifi.conf | |
| fi | |
| if [ ! -e /pref/wifi.conf ]; then | |
| cp /usr/local/share/script/wifi.conf /pref/wifi.conf | |
| fi | |
| if [ $card_config -eq 0 ]; then | |
| mkdir -p /tmp/fuse_d/MISC | |
| cat /pref/wifi.conf | sed -e 's/$/\r/' > /tmp/fuse_d/MISC/wifi.conf | |
| fi | |
| #check wifi mode | |
| WIFI_MODE=`cat /pref/wifi.conf | grep -Ev "^#" | grep WIFI_MODE | cut -c 11-` | |
| /usr/local/share/script/load.sh "${WIFI_MODE}" | |
| sleep 1 | |
| #fix: boss boot during video recording, wifi needs time to bringup | |
| if [ -e /sys/bus/sdio/devices/mmc1:0001:1 ]; then | |
| n=0 | |
| ifconfig wlan0 | |
| waitagain=$? | |
| while [ $n -ne 60 ] && [ $waitagain -ne 0 ]; do | |
| n=$(($n + 1)) | |
| echo $n | |
| sleep 1 | |
| ifconfig wlan0 | |
| waitagain=$? | |
| done | |
| fi | |
| if [ $waitagain -ne 0 ]; then | |
| echo "There is no WIFI interface!" | |
| exit 1 | |
| fi | |
| echo "found WIFI interface!" | |
| if [ "${WIFI_MODE}" == "p2p" ] ; then | |
| /usr/local/share/script/p2p_start.sh | |
| elif [ "${WIFI_MODE}" == "sta" ] ; then | |
| /usr/local/share/script/sta_start.sh | |
| else | |
| /usr/local/share/script/ap_start.sh | |
| fi |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/sh | |
| wmiconfig -i wlan0 --sethostmode asleep | |
| wmiconfig -i wlan0 --setwowmode enable | |
| if [ "${1}" == "" ]; then | |
| wmiconfig -i wlan0 --addwowpattern 0 2 20 0800 FFFF | |
| else | |
| MAC=`ifconfig wlan0 | grep HWaddr | awk '{print $NF}' | sed 's/://g'` | |
| echo "Only filter match MAC address: ${MAC}" | |
| wmiconfig -i wlan0 --addwowpattern 0 6 0 ${MAC} FFFFFFFFFFFF | |
| wmiconfig -i wlan0 --addwowpattern 0 6 6 ${MAC} FFFFFFFFFFFF | |
| fi |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Is there a way to invoke
wifi_start.sh? I've been trying with ash files without luck