Fredrik Lindqvist Landrash

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

	# /bin/bash

	##########################################################
	### Simple notetaking script ###
	### Creates notes in a folder based on date ###
	### and add a timestamp into the file when it launched ###
	##########################################################

	#Variables
	EDITOR="nano"

	echo "Please take a moment to setup autorenewal of duckdns."
	echo "If no choice is made the installation will exit."
	echo
	echo "(if your domain is 'example.duckdns.org' type example)"
	echo -n "Domain: "
	read -r domain
	if [ ! "$domain" ]; then
	exit
	fi
	if [[ $domain = "duckdns" ]]; then

	views:
	- path: default_view
	icon: 'mdi:home'
	title: Home
	- type: horizontal-stack
	badges: []
	cards:
	- type: vertical-stack
	cards:
	cards:

	#!/bin/bash -e

	echo "Stopping zigbee2mqttdev..."
	sudo systemctl stop zigbee2mqttdev

	echo "Creating backup of configuration..."
	cp -R data data-backup

	echo "Updating..."
	git pull

	#!/bin/bash
	function zigbee2mqttdev-show-short-info {
	echo "Setup for development version of Zigbee2mqtt."
	}

	function zigbee2mqttdev-show-long-info {
	echo "This script installs the development version of Zigbee2mqtt."
	}

	function zigbee2mqttdev-show-copyright-info {

	#!/bin/bash
	function find3cli-show-short-info {
	echo "Setup for find3-cli. "
	}

	function find3cli-show-long-info {
	echo "This script installs find3-cli."
	}

	function find3cli-show-copyright-info {

	#!/bin/bash

	if [ -f pi-gen/stage0/SKIP ]; then
	echo "SKIP file found. Removing SKIP files"
	sudo rm pi-gen/stage0/SKIP
	sudo rm pi-gen/stage1/SKIP
	sudo rm pi-gen/stage2/SKIP
	exit
	else
	echo "No SKIP file found. Creating SKIP files."

	diagram:
	fill: "snow"
	rows: 5
	columns: 12
	gridLines: false
	gridPaddingInner: .25
	groupPadding: .75

	title:
	author: Fredrik Lindqvist