Playstation 2 EU USB "The Buzz" controller

README.md

"The Buzz" Playstation 2 EU USB controller

Using tool "Simple HID Write"

• W: Write
• R: Read

W 00 {FF} 00 00 00 // controller 1 red light activate
W 00 {00} 00 00 00 // controller 1 red light deactivate
W 00 00 {FF} 00 00 // controller 2 red light activate
W 00 00 {00} 00 00 // controller 2 red light deactivate
W 00 00 00 {FF} 00 // controller 3 red light activate
W 00 00 00 {00} 00 // controller 3 red light deactivate
W 00 00 00 00 {FF} // controller 4 red light activate
W 00 00 00 00 {00} // controller 4 red light deactivate

R 7F 7F {00 00 F0} // any controller button release (reports currently pressed buttons)

R 7F 7F {01} 00 F0 // controller 1 red button press
R 7F 7F {10} 00 F0 // controller 1 blue button press
R 7F 7F {08} 00 F0 // controller 1 orange button press
R 7F 7F {04} 00 F0 // controller 1 green button press
R 7F 7F {02} 00 F0 // controller 1 yellow button press

R 7F 7F {20} 00 F0 // controller 2 red button press
R 7F 7F 00 {02} F0 // controller 2 blue button press
R 7F 7F 00 {01} F0 // controller 2 orange button press
R 7F 7F {80} 00 F0 // controller 2 green button press
R 7F 7F {40} 00 F0 // controller 2 yellow button press

R 7F 7F 00 {04} F0 // controller 3 red button press
R 7F 7F 00 {40} F0 // controller 3 blue button press
R 7F 7F 00 {20} F0 // controller 3 orange button press
R 7F 7F 00 {10} F0 // controller 3 green button press
R 7F 7F 00 {08} F0 // controller 3 yellow button press

R 7F 7F 00 80 {F0} // controller 4 red button press
R 7F 7F 00 00 {F8} // controller 4 blue button press
R 7F 7F 00 00 {F4} // controller 4 orange button press
R 7F 7F 00 00 {F2} // controller 4 green button press
R 7F 7F 00 00 {F1} // controller 4 yellow button press

NOTE: All results seem to be flag-sets for buttons so for example combining is a binary OR operation

R 7F 7F {20 80} F0 // controller 2 & controller 4 red button press

R 7F 7F 00 {03} F0 // controller 2 blue & orange button press

R 7F 7F 00 00 {FC} // controller 4 blue & orange button press

R 7F 7F 00 {03 FC} // controller 2 & 4 blue & orange button press

W 00 {FF FF FF FF} // Turn on all red lights for controllers

Also:

• When multiple buttons are pressed, multiple button release receives are generated (seems to be one-per button)
• When multiple buttons are pressed, even if simultaneous the hw controller generates one event per button resolving timing issues
• When multiple reads are detected from multi-press, it's probably a good idea to debounce until presses stop, or register the first and ignore the rest
• As the controller sends complete state per button press, no need to store state

Device Info

• VID 054C (hex) 1356 (dec) 2514 (oct)
• PID 0002 (hex) 0002 (dec) 0002 (oct)
• REV 1101 (hex) 4353 (dec) 10401 (oct)
• Vendor name "Logitech"
• Product name "Logitech Buzz(tm) Controller V1"
• Serial No ""

Report Size

• Input 6-Bytes
• Output 8-Bytes
• Feature 0-Byte

Hello! Realy happy with your script! Is there a way to keep the lights on?

@Anukatak well you'll see there are turn off and turn on, so if you turn on without turning off, they would stay on, wouldn't they 😉

Sorry for the dumb question ahaha a few minutes after asking I understood just that! Thanks for the script!

It was not my intent to make you feel dumb or like your question was unfounded. Sorry for that. Text medium was not conveying me being a bit smirky in explanation. Thanks for feedback and glad you like.