gistfile1.txt

Liam D, [08/12/2022 23:39]
liamdawe@pop-os:~$ sudo apt upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies.
 gir1.2-mutter-10 : Depends: libmutter-10-0 (= 42.2-0ubuntu1pop1~1656366415~22.04~8e50951) but 42.3-1ubuntu1pop1~1658401497~22.04~928bf97 is installed
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).
liamdawe@pop-os:~$ sudo apt --fix-broken install
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
  gstreamer1.0-pipewire:i386 libopenaptx0 linux-headers-5.16.19-76051619
  linux-headers-5.16.19-76051619-generic linux-image-5.16.19-76051619-generic
  linux-modules-5.16.19-76051619-generic pipewire-audio-client-libraries
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
  gir1.2-mutter-10
The following packages will be upgraded:
  gir1.2-mutter-10
1 to upgrade, 0 to newly install, 0 to remove and 382 not to upgrade.
49 not fully installed or removed.
Need to get 0 B/183 kB of archives.
After this operation, 1,024 B of additional disk space will be used.
Do you want to continue? [Y/n] y
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

Liam D, [08/12/2022 23:39]
dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

Liam D, [08/12/2022 23:39]
dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

Liam D, [08/12/2022 23:39]
dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

Liam D, [08/12/2022 23:39]
dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

Liam D, [08/12/2022 23:39]
dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports has already been reached
                                                                    dpkg: depend
ency problems prevent processing triggers for libglib2.0-0:i386:
 libglib2.0-0:i386 depends on libc6 (>= 2.34); however:
  Package libc6:i386 is not configured yet.

Liam D, [08/12/2022 23:39]
dpkg: error processing package libglib2.0-0:i386 (--configure):
 dependency problems - leaving triggers unprocessed
dpkg: too many errors, stopping
No apport report written because MaxReports has already been reached
                                                                    Errors were 
encountered while processing:
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
 libglib2.0-0:i386
Processing was halted because there were too many errors.
E: Sub-process /usr/bin/dpkg returned an error code (1)