Skip to content

Instantly share code, notes, and snippets.

@Low-power

Low-power/huawei-taishan-2180-serial-conole-boot-log

Created November 26, 2021 06:26
Show Gist options
  • Save Low-power/a32ca47ab15182599ab7f4b0c375745b to your computer and use it in GitHub Desktop.
Save Low-power/a32ca47ab15182599ab7f4b0c375745b to your computer and use it in GitHub Desktop.
Download ZIP
Raw
huawei-taishan-2180-serial-conole-boot-log
DIE1 CLUSTER1 L1/L2 Cache Mbist OK!
DIE1 CLUSTER2 L1/L2 Cache Mbist OK!
DIE1 CLUSTER3 L1/L2 Cache Mbist OK!
DIE2 CLUSTER0 L1/L2 Cache Mbist OK!
DIE2 CLUSTER1 L1/L2 Cache Mbist OK!
DIE2 CLUSTER2 L1/L2 Cache Mbist OK!
DIE2 CLUSTER3 L1/L2 Cache Mbist OK!
DIE1 CLUSTER0 L1/L2 Cache Mbist OK!
LLC Mbist start, please wait for a moment!
LLC Mbist OK!
LLC Mbist start, please wait for a moment!
LLC Mbist OK!
HHA MBIST
TotemC HHA0: OK
TotemC HHA1: OK
TotemA HHA0: OK
TotemA HHA1: OK
M3 release reset CONFIG.........Done
[serdes_hilink2_init]:hilink2_mode pcie2 8 lane
Halt Macro 2 MCU!!
Macro 2 Download Firmware Success!!
Release Macro 2 MCU!!
Soc type is 1610
HostBridge 0, Port 2 Link up ok
Boot firmware (version V200R001C00 SPC999B999)
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Override\ArmPlatformPkg\Sec\Sec\DEBUG\ArmPlatformSec.dll 0xA4801800
Trust Zone Configuration is disabled
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\ArmPlatformPkg\PrePeiCore\PrePeiCoreMPCore\DEBUG\ArmPlatformPrePeiCore.dll 0xA4821800
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Core\Pei\PeiMain\DEBUG\PeiCore.dll 0xA4828320
SM750HS FOUND!
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\BiosCrcCheck\BiosCrcCheck\DEBUG\BiosCrcCheck.dll 0xA483B880
System Boot From Master BIOS : 0x0.
BIOS 0xA4800000 CRC OK, 0x70E04AF2 equal to expect 0x70E04AF2
OemBiosInfo is :
[BiosCrcCheckPei]: Build Time is : 2017-07-12 17:41:43
[BiosCrcCheckPei]: UniBiosVersion 10.01.01T99
[BiosCrcCheckPei]: BiosImageSize 0x00300000
[BiosCrcCheckPei]: BiosName uniBIOS
[BiosCrcCheckPei]: biosUpdateFlag 0x00000017
[BiosCrcCheckPei]: fileCheckSum 0x00000000
[BiosCrcCheckPei]: BIOSCRCSum 0x70E04AF2
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\ArmPlatformPkg\PlatformPei\PlatformPeim\DEBUG\PlatformPei.dll 0xA483F448
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\FaultTolerantWritePei\FaultTolerantWritePei\DEBUG\FaultTolerantWritePei.dll 0xA4842BD0
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Variable\Pei\VariablePei\DEBUG\PeiVariable.dll 0xA4846718
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Ipmi\IpmiInterfacePei\IpmiInterfacePei\DEBUG\IpmiInterfacePei.dll 0xA484ADA0
init BMC.
TempVer:0x20
GetDeviceId return Success
&&&Now config iBMC BIOS WDT [action:0 countdown:9000 timeruse 2!
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Override\ArmPlatformPkg\MemoryInitPei\MemoryInitPeim\DEBUG\MemoryInit.dll 0xA484FCB0
Memory Init PEIM Loaded
$$$ Initialize Totem I2C
Read SPD from-> DeviceType: SPD Socket:0 Port:1 SlaveAddr:0x54
SPD_KEY_BYTE: 0xC
SPD_KEY_BYTE2: 0x1
SPD_MODULE_ORG_DDR4: 0x8
SPD_MIN_TCK_DDR4: 0x7
SPD_MAX_TCK_DDR4: 0xD
SPD_FTB_MIN_TCK_DDR4: 0xD6
$$$ skt 0, ch 0, dimm 0, speed 2400, tCK : 8330
Read SPD from-> DeviceType: SPD Socket:0 Port:1 SlaveAddr:0x55
[ReadSpd]:[1474L] I2C Read Status : Time out
SPD_KEY_BYTE: 0x0
Socket[0] Channel[0] Dimm[1] is empty.
Read SPD from-> DeviceType: SPD Socket:0 Port:0 SlaveAddr:0x54
[ReadSpd]:[1474L] I2C Read Status : Time out
SPD_KEY_BYTE: 0x0
Socket[0] Channel[1] Dimm[0] is empty.
Read SPD from-> DeviceType: SPD Socket:0 Port:0 SlaveAddr:0x55
[ReadSpd]:[1474L] I2C Read Status : Time out
SPD_KEY_BYTE: 0x0
Socket[0] Channel[1] Dimm[1] is empty.
Read SPD from-> DeviceType: SPD Socket:0 Port:1 SlaveAddr:0x50
[ReadSpd]:[1474L] I2C Read Status : Time out
SPD_KEY_BYTE: 0x0
Socket[0] Channel[2] Dimm[0] is empty.
Read SPD from-> DeviceType: SPD Socket:0 Port:1 SlaveAddr:0x51
[ReadSpd]:[1474L] I2C Read Status : Time out
SPD_KEY_BYTE: 0x0
Socket[0] Channel[2] Dimm[1] is empty.
Read SPD from-> DeviceType: SPD Socket:0 Port:0 SlaveAddr:0x50
[ReadSpd]:[1474L] I2C Read Status : Time out
SPD_KEY_BYTE: 0x0
Socket[0] Channel[3] Dimm[0] is empty.
Read SPD from-> DeviceType: SPD Socket:0 Port:0 SlaveAddr:0x51
[ReadSpd]:[1474L] I2C Read Status : Time out
SPD_KEY_BYTE: 0x0
Socket[0] Channel[3] Dimm[1] is empty.
$$$ GblData->DdrFreqIdx: 9 GblData->Tck:10714
$$$ pGblData->MaxSPCNum 2
$$$skt 0, ch 0, maxPORFreqIdx 11
$$$ pGblData->DdrFreqIdx 9, pGblData->Tck 10714
$$$ GblData.Freq 1866
$$$ Get DIMM SPD information
Get SPD from Socket 0 Channel 0 Dimm 0[I2C Port 1 Slave 0x54]
SPD_SDRAM_BANKS: 0x85
SPD_SDRAM_ADDR: 0x29
SPD_VDD_DDR4: 0x3
SPD_MEM_BUS_WID_DDR4: 0xB
PrimaryBusWidth: 64 bits
ExtensionBusWidth: 8 bits
RankSize: 16384 MB
SPDRMId_DDR4: 0xB300
SPDMMfgId_DDR4: 0xCE00
SPDMMDate_DDR4: 0x1817
SPDSerialNum: 0xF8DE2D19
SpdModPartDDR4: 0x4D
SpdModPartDDR4: 0x33
SpdModPartDDR4: 0x39
SpdModPartDDR4: 0x33
SpdModPartDDR4: 0x41
SpdModPartDDR4: 0x34
SpdModPartDDR4: 0x4B
SpdModPartDDR4: 0x34
SpdModPartDDR4: 0x30
SpdModPartDDR4: 0x42
SpdModPartDDR4: 0x42
SpdModPartDDR4: 0x31
SpdModPartDDR4: 0x2D
SpdModPartDDR4: 0x43
SpdModPartDDR4: 0x52
SpdModPartDDR4: 0x43
SpdModPartDDR4: 0x20
SpdModPartDDR4: 0x20
SpdModPartDDR4: 0x20
SpdModPartDDR4: 0x20
SPD_MIN_TRCD_DDR4: 0x6E
SPD_FTB_TRCD_DDR4: 0x0
$$$ MTBNUM :110 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0x2191C TCK_1p10ps:10714
SPD_MIN_TRRDL_DDR4: 0x28
$$$ MTBNUM :40 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0xC350 TCK_1p10ps:10714
SPD_MIN_TRRDS_DDR4: 0x1B
$$$ MTBNUM :27 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0x83D6 TCK_1p10ps:10714
SPD_EXT_TRC_TRAS_DDR4: 0x11
SPD_MIN_TRAS_DDR4: 0x0
SPD_MIN_TRC_DDR4: 0x6E
SPD_FTB_TRC_DDR4: 0x0
$$$ MTBNUM :256 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0x4E200 TCK_1p10ps:10714
$$$ MTBNUM :366 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0x6FB1C TCK_1p10ps:10714
SPD_MIN_TRFC1_MSB_DDR4: 0xA
SPD_MIN_TRFC1_LSB_DDR4: 0xF0
tRFC: 0xAF0
$$$ MTBNUM :2800 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0x3567E0 TCK_1p10ps:10714
tempCkNum: 0x147
SPD_MIN_TAA_DDR4: 0x6E
SPD_FTB_TAA: 0x0
$$$ MTBNUM :110 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0x2191C TCK_1p10ps:10714
SPD_TFAW_UPPER_DDR4: 0x0
SPD_MIN_TFAW_DDR4: 0x68
$$$ MTBNUM :104 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0x1FBD0 TCK_1p10ps:10714
SPD_MIN_TRP_DDR4: 0x6E
SPD_FTB_TRP_DDR4: 0x0
$$$ MTBNUM :110 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0x2191C TCK_1p10ps:10714
$$$ tempCkNum: 13
SPD_MIN_TCCDL_DDR4: 0x28
SPD_FTB_TCCDL_DDR4: 0x0
$$$ MTBNUM :40 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0xC350 TCK_1p10ps:10714
SPD_RDIMM_ATTR_DDR4: 0x9
SPD_ADD_MAPPING_DDR4: 0x1
----------------------------------------
Socket Channel Dimm Present
0 0 0 YES
0 0 1 NOT
0 0 2 NOT
0 1 0 NOT
0 1 1 NOT
0 1 2 NOT
0 2 0 NOT
0 2 1 NOT
0 2 2 NOT
0 3 0 NOT
0 3 1 NOT
0 3 2 NOT
----------------------------------------
-------------- CPU info for Socket 0 Nimbus --------------
PLL0 Frequency: 1050MHz
PLL1 Frequency: 800MHz
PLL2 Frequency: 1200MHz
PLL3 Frequency: 625MHz
PLL4 Frequency: 650MHz
------------------------------------------------------
-------------- CPU info for Socket 0 TA --------------
CPU Frequency: 2100MHz SC
PLL2 Frequency: 933MHz SC
PLL3 Frequency: 933MHz SC
PLL4 Frequency: 800MHz SC
Wafer ID: 25
DIE X: -2 Y: 7
CP Test Date: 2016-03-04
------------------------------------------------------
-------------- CPU info for Socket 0 TC --------------
CPU Frequency: 2100MHz SC
PLL2 Frequency: 933MHz SC
PLL3 Frequency: 933MHz SC
PLL4 Frequency: 800MHz SC
Wafer ID: 23
DIE X: 7 Y: 24
CP Test Date: 2016-03-04
------------------------------------------------------
------------- System Memory Speed --------------------
DDR Frequency: 1866MHz
------------------------------------------------------
$$$ Initialize data structure
$$$ MTBNUM :110 mtb: 1250; FtbNum:0 ftb: 10 tempVal:0x2191C TCK_1p10ps:10714
CL=13, CLSupport=0xFF8
Socket[0] Channel[0] Base:[0x60340000]
DdrFreqIdx:0X9
TIMING0:0X6239D60F
timing0.bits.tmrd:6
timing0.bits.trrd:2
timing0.bits.trp :7
timing0.bits.trcd:7
timing0.bits.trc :22
timing0.bits.tras:15
TIMING1:0X40273CA4
timing1.bits.tsre:64
timing1.bits.trtw:2
timing1.bits.twl :14
timing1.bits.tcl :15
timing1.bits.trfc:164
TIMING2:0XF2007071
timing2.bits.tcke :15
timing2.bits.twtr :2
timing2.bits.tfaw :7
timing2.bits.taref:113
TIMING3:0X20200CF4
timing3.bits.tzq_prd:128
timing3.bits.tzqinit:256
timing3.bits.taond :12
timing3.bits.txard :15
timing3.bits.trtp :4
TIMING4:0XC00000
timing4.bits.trodt_ext:0
timing4.bits.tmod :12
timing4.bits.twlo :0
timing4.bits.twldqsen :0
timing4.bits.twlmrd :0
TIMING5:0X2008
timing5.bits.twodt_ext:0
timing5.bits.tdqsckmax:0
timing5.bits.tdqsck :0
timing5.bits.trnk2rnk :0
timing5.bits.tzqcs :32
timing5.bits.twr :8
TIMING6:0X3430FF
timing6.bits.tccd_nsw:0
timing6.bits.tccd_nsr:0
timing6.bits.trrd_l :3
timing6.bits.twtr_l :4
timing6.bits.tccd_l :3
timing6.bits.todt_sft:0
timing6.bits.tcksrx :15
timing6.bits.tcksre :15
TIMING7:0X101433
timing7.bits.dimm_trtr:1
timing7.bits.dimm_twtw:0
timing7.bits.rnk_trtr :1
timing7.bits.rnk_twtw :4
timing7.bits.rnk_trtw :3
timing7.bits.rnk_twtr :3
LAT0:0XF04007E
lat0.bits.phyif_tim_wden:15
lat0.bits.phyif_tim_rodt:4
lat0.bits.phyif_tim_wodt:0
lat0.bits.phyif_tim_oven:126
LAT1:0XB06080B
lat1.bits.phyif_tim_rden:6
lat1.bits.phyif_tim_rdcs:11
lat1.bits.phyif_tim_wdda:8
lat1.bits.phyif_tim_wdcs:11
lat1.bits.ie_delay_cycle:10
DDRPHY PLL OK!
phyRdDataEnIeDly 0xA!
phyDqsFailRiseDelay 0xBE00BE!
phyRdDataEnIeDly 0xA!
phyDqsFailRiseDelay 0xBE00BE!
phyRdDataEnIeDly 0xA!
phyDqsFailRiseDelay 0xBE00BE!
phyRdDataEnIeDly 0xA!
phyDqsFailRiseDelay 0xBE00BE!
phyRdDataEnIeDly 0xA!
phyDqsFailRiseDelay 0xBE00BE!
phyRdDataEnIeDly 0xA!
phyDqsFailRiseDelay 0xBE00BE!
phyRdDataEnIeDly 0xA!
phyDqsFailRiseDelay 0xBE00BE!
phyRdDataEnIeDly 0xA!
phyDqsFailRiseDelay 0xBE00BE!
phyRdDataEnIeDly 0xA!
phyDqsFailRiseDelay 0xBE00BE!
Now Using DDR4 ODT Conifg!
DDR exit self-refresh!
cal 0: 17 29 15: 19 27 12: 17 28 14
cal 1: 17 28 15: 19 27 12: 17 28 14
cal 2: 17 29 15: 19 27 12: 17 28 14
cal 3: 17 28 15: 19 27 12: 17 28 14
cal 4: 17 29 15: 19 27 12: 17 28 14
cal 5: 17 29 15: 19 27 12: 17 28 14
cal 6: 17 29 15: 19 27 12: 17 28 14
cal 7: 17 29 15: 19 27 12: 17 28 14
cal 8: 17 29 15: 19 27 12: 17 28 14
cal 9: 17 29 15: 19 27 12: 17 28 14
DDRPHY INIT COMPLETED!
PHY REG[0XC01C]=0X50610000.
PHY REG[0XC020]=0X00000150.
PHY REG[0XC024]=0X6100FF80.
PHY REG[0XC028]=0X00015050.
PHY REG[0XC034]=0X80800001.
PHY REG[0XC038]=0X0000000A.
PAD Calibration[0] status[0xc9cc]:8F71E452.
PAD PVTR/N/P[0][0xc96c]:01FDF751.
PAD[0][0xc96c]:PVTP=0x11,PVTN=0x1D,PVTR=0x1F.
PAD Calibration[1] status[0xc9dc]:8C69D4D4.
PAD PVTR/N/P[1][0xc988]:01FDF6D3.
PAD[0][0xc988]:PVTP=0x13,PVTN=0x1B,PVTR=0x1F.
PAD Calibration[2] status[0xc9ec]:8E6DE452.
PAD PVTR/N/P[2][0xc9a4]:01FDF711.
PAD[0][0xc9a4]:PVTP=0x11,PVTN=0x1C,PVTR=0x1F.
ddrcCfgddrmode 0x72180837
DDR reset de-assert OK!
$$$ddrcCfgRnkVol: 0x10A62
$$$ddrcCfgRnkVol: 0x10A62
DDRC exit self-refresh mode!
DIMM[0] RCD Init finished!
Rank[0]:SFC ZQCL send...
DDR rank[0] init finished!
Rank[1]:SFC ZQCL send...
DDR rank[1] init finished!
DMC REG[0X8050](DMC_WORK_MODE)=0X72190837.
DMC REG[0X811C](DMC_RNK2RNK_TIMING)=0X00101433.
DMC REG[0X8030](DMC_CFG_ECC)=0X00000011.
DMC REG[0X8200]=0X101F1010.
SPEED = 1866 Mpbs!
X4_MODE!
RANK_NUM=2!
DDR4_RDIMM!
EMRS0:0X0720,EMRS1:0X0401,EMRS2:0X0418,EMRS3:0X0000,EMRS4:0X0808,EMRS5:0X0040,EMRS6:0X0815!
Config Phy Odt
Gate Leveling1 Training Start
max_lat_adj[0] is 0x00000000
max_lat_adj[1] is 0x00000000
max_lat_adj[2] is 0x00000000
max_lat_adj[3] is 0x00000000
max_lat_adj[4] is 0x00000000
max_lat_adj[5] is 0x00000000
max_lat_adj[6] is 0x00000000
max_lat_adj[7] is 0x00000000
max_lat_adj[8] is 0x00000000
Rank[0] gate training done!
max_lat_adj[0] is 0x00000001
max_lat_adj[1] is 0x00000001
max_lat_adj[2] is 0x00000001
max_lat_adj[3] is 0x00000001
max_lat_adj[4] is 0x00000001
max_lat_adj[5] is 0x00000001
max_lat_adj[6] is 0x00000001
max_lat_adj[7] is 0x00000001
max_lat_adj[8] is 0x00000001
Rank[1] gate training done!
Phy Vref Training Start
Phy Vref Training Start...
Byte[0]'s good vref value:16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 25
Byte[1]'s good vref value:16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25
Byte[2]'s good vref value:17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23
Byte[3]'s good vref value:15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 26
Byte[4]'s good vref value:18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25
Byte[5]'s good vref value:16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23
Byte[6]'s good vref value:16 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24
Byte[7]'s good vref value:15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22
Byte[8]'s good vref value:12 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20
Best vref is:0x1C!
Gate Leveling2 Training Start
max_lat_adj[0] is 0x00000001
max_lat_adj[1] is 0x00000001
max_lat_adj[2] is 0x00000001
max_lat_adj[3] is 0x00000001
max_lat_adj[4] is 0x00000001
max_lat_adj[5] is 0x00000001
max_lat_adj[6] is 0x00000001
max_lat_adj[7] is 0x00000001
max_lat_adj[8] is 0x00000001
Rank[0] gate training done!
max_lat_adj[0] is 0x00000001
max_lat_adj[1] is 0x00000001
max_lat_adj[2] is 0x00000001
max_lat_adj[3] is 0x00000001
max_lat_adj[4] is 0x00000001
max_lat_adj[5] is 0x00000001
max_lat_adj[6] is 0x00000001
max_lat_adj[7] is 0x00000001
max_lat_adj[8] is 0x00000001
Rank[1] gate training done!
Gate Adjust Training Start
The smallest RddqsLatencyAdjustX4 = 0x1.
The smallest RddqsLatencyAdjust = 0x1.
Before adjust:DmcReg[0x8188]=0x0B06080B.
After adjust:DmcReg[0x8188]=0x0C06080B.
Write Leveling Training Start
Write leveling for rank[0] begin!
Send the 736th DQS Strobe to the dram . hsPhyWrLvlResp.u32:0x3FFFF
Write leveling for rank[0] Done
Write leveling for rank[1] begin!
Send the 704th DQS Strobe to the dram . hsPhyWrLvlResp.u32:0x3FFFF
Write leveling for rank[1] Done
Write Leveling2 Training Start...
###RANK[0] BYTE[8] WL LOW 0x01900280
###RANK[0] BYTE[4] WL LOW 0x014C0280
###RANK[0] BYTE[8] WL HIGH 0x61000196
###RANK[0] BYTE[4] WL HIGH 0x61000152
###RANK[0] FST RD 0x603484A8 = 0x33335555
###RANK[0] FST RD 0x603484AC = 0x55333333
###RANK[0] FST RD 0x603484B0 = 0xCCCCAAAA
###RANK[0] FST RD 0x603484B4 = 0xAACCCCCC
###RANK[0] FST RD 0x603484B8 = 0x55553333
###RANK[0] FST RD 0x603484BC = 0x33555555
###RANK[0] FST RD 0x603484C0 = 0xAAAACCCC
###RANK[0] FST RD 0x603484C4 = 0xCCAAAAAA
###RANK[0] FST RD 0x603484C8 = 0xAA55CC33
###RANK[0] BYTE[8] WL 0x01900280
###RANK[0] BYTE[8] LOW 0x00003C5A
###RANK[0] BYTE[4] WL 0x014C0280
###RANK[0] BYTE[4] LOW 0x00003C5A
###RANK[0] BYTE[8] WL 0x61000196
###RANK[0] BYTE[8] HIGH 0x00003C5A
###RANK[0] BYTE[4] WL 0x61000152
###RANK[0] BYTE[4] HIGH 0x00003C5A
###RANK[1] BYTE[8] WL LOW 0x01900280
###RANK[1] BYTE[4] WL LOW 0x01400280
###RANK[1] BYTE[8] WL HIGH 0x61000184
###RANK[1] BYTE[4] WL HIGH 0x61000152
###RANK[1] FST RD 0x603484A8 = 0x33535555
###RANK[1] FST RD 0x603484AC = 0x55333333
###RANK[1] FST RD 0x603484B0 = 0xCCACAAAA
###RANK[1] FST RD 0x603484B4 = 0xAACCCCCC
###RANK[1] FST RD 0x603484B8 = 0x55353333
###RANK[1] FST RD 0x603484BC = 0x33555555
###RANK[1] FST RD 0x603484C0 = 0xAACACCCC
###RANK[1] FST RD 0x603484C4 = 0xCCAAAAAA
###RANK[1] FST RD 0x603484C8 = 0xAA55CC33
###RANK[1] BYTE[8] WL 0x01900280
###RANK[1] BYTE[8] LOW 0x00003C5A
###RANK[1] BYTE[4] WL 0x01400280
###RANK[1] BYTE[4] LOW 0x00003C5A
###RANK[1] BYTE[8] WL 0x61000184
###RANK[1] BYTE[8] HIGH 0x00003C5A
###RANK[1] BYTE[4] WL 0x61000152
###RANK[1] BYTE[4] HIGH 0x00003C5A
Dram Vref Training 2 Start...
DRAM Vref Training 2 Start...
OptimalVref for Rank 0 is:0x17!
OptimalVref for Rank 1 is:0x19!
Read Dataeye Training Start...
addlatency 0xC6
SetPhyIeTiming 0x80800000
byteIndex: 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8
Read dataeye training for rank[0] Done
addlatency 0xC6
SetPhyIeTiming 0x80800100
byteIndex: 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8
Read dataeye training for rank[1] Done
Write Dataeye Training Start...
SetPhyIeTiming 0x80800000
Write dataeye training for rank[0] Done
SetPhyIeTiming 0x80800100
Write dataeye training for rank[1] Done
Phy Vref Training 2 Start
Phy Vref Training 2 Start...
OptimalVref is:0x1E!
After adjust:optimalVref is:0x21!
Read Dataeye Training 2 Start
addlatency 0xC6
SetPhyIeTiming 0x80800000
byteIndex: 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8
Read dataeye training for rank[0] Done
addlatency 0xC6
SetPhyIeTiming 0x80800100
byteIndex: 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8
Read dataeye training for rank[1] Done
PhyClkWrdqsSlaveDelay
Rank0 Rank1 Rank2 Rank3
Byte0 0x004E028D 0x00600285 0x00000280 0x00000280
Byte1 0x005A028B 0x005A0289 0x00000280 0x00000280
Byte2 0x01EA028C 0x01EA0283 0x00000280 0x00000280
Byte3 0x01D8028B 0x01CC028F 0x00000280 0x00000280
Byte4 0x014C028C 0x0140028A 0x00000280 0x00000280
Byte5 0x0178028C 0x01840285 0x00000280 0x00000280
Byte6 0x01C00283 0x01C6027B 0x00000280 0x00000280
Byte7 0x0002027F 0x00060287 0x00000280 0x00000280
Byte8 0x0190028A 0x01900289 0x00000280 0x00000280
PhyClkWrdqsSlaveDelayX4
Rank0 Rank1 Rank2 Rank3
Byte0 0x6100005A 0x6100005A 0x61000000 0x61000000
Byte1 0x6100004E 0x61000042 0x61000000 0x61000000
Byte2 0x610001F8 0x61000004 0x61000000 0x61000000
Byte3 0x610001DE 0x610001C6 0x61000000 0x61000000
Byte4 0x61000152 0x61000152 0x61000000 0x61000000
Byte5 0x6100016C 0x6100017E 0x61000000 0x61000000
Byte6 0x610001B4 0x610001C6 0x61000000 0x61000000
Byte7 0x6100000C 0x61000006 0x61000000 0x61000000
Byte8 0x61000196 0x61000184 0x61000000 0x61000000
PhyWritePathLatAdd
Rank0 Rank1 Rank2 Rank3
Byte0 0x00000001 0x00000001 0x00000000 0x00000000
Byte1 0x00000001 0x00000001 0x00000000 0x00000000
Byte2 0x00000000 0x00000000 0x00000000 0x00000000
Byte3 0x00000000 0x00000000 0x00000000 0x00000000
Byte4 0x00000000 0x00000000 0x00000000 0x00000000
Byte5 0x00000000 0x00000000 0x00000000 0x00000000
Byte6 0x00000000 0x00000000 0x00000000 0x00000000
Byte7 0x00000001 0x00000001 0x00000000 0x00000000
Byte8 0x00000000 0x00000000 0x00000000 0x00000000
PhyWritePathLatAddX4
Rank0 Rank1 Rank2 Rank3
Byte0 0x03FF0100 0x03FF0100 0x03FF0000 0x03FF0000
Byte1 0x03FF0100 0x03FF0100 0x03FF0000 0x03FF0000
Byte2 0x03FF0000 0x03FF0100 0x03FF0000 0x03FF0000
Byte3 0x03FF0000 0x03FF0000 0x03FF0000 0x03FF0000
Byte4 0x03FF0000 0x03FF0000 0x03FF0000 0x03FF0000
Byte5 0x03FF0000 0x03FF0000 0x03FF0000 0x03FF0000
Byte6 0x03FF0000 0x03FF0000 0x03FF0000 0x03FF0000
Byte7 0x03FF0100 0x03FF0100 0x03FF0000 0x03FF0000
Byte8 0x03FF0000 0x03FF0000 0x03FF0000 0x03FF0000
RddqsGate
Rank0 Rank1 Rank2 Rank3
Byte0 0x070001F1 0x070001F2 0x070000C0 0x070000C0
Byte1 0x07000171 0x07000177 0x070000C0 0x070000C0
Byte2 0x07000128 0x0700011F 0x070000C0 0x070000C0
Byte3 0x070000D2 0x070000C9 0x070000C0 0x070000C0
Byte4 0x070000DD 0x070000DC 0x070000C0 0x070000C0
Byte5 0x07000116 0x0700010B 0x070000C0 0x070000C0
Byte6 0x07000193 0x0700018E 0x070000C0 0x070000C0
Byte7 0x070001E1 0x070001E0 0x070000C0 0x070000C0
Byte8 0x070000B1 0x07000099 0x070000C0 0x070000C0
RddqsGateX4
Rank0 Rank1 Rank2 Rank3
Byte0 0x000001EB 0x000001F7 0x00000000 0x00000000
Byte1 0x00000172 0x00000174 0x00000000 0x00000000
Byte2 0x00000123 0x00000122 0x00000000 0x00000000
Byte3 0x000000D7 0x000000D1 0x00000000 0x00000000
Byte4 0x000000D9 0x000000DD 0x00000000 0x00000000
Byte5 0x00000113 0x0000011C 0x00000000 0x00000000
Byte6 0x0000018B 0x00000180 0x00000000 0x00000000
Byte7 0x000001E1 0x000001CA 0x00000000 0x00000000
Byte8 0x000000A4 0x000000B1 0x00000000 0x00000000
RddqsDqnFallRiseSlaveDelay
Rank0 Rank1 Rank2 Rank3
Byte0 0x00BC00C2 0x00B100C8 0x00BE00BE 0x00BE00BE
0x00C400C5 0x00B400C8 0x00BE00BE 0x00BE00BE
0x00B600BE 0x00B100BF 0x00BE00BE 0x00BE00BE
0x00AF00BC 0x00AF00C2 0x00BE00BE 0x00BE00BE
0x00B800C5 0x00B200BE 0x00BE00BE 0x00BE00BE
0x00BC00C8 0x00B400BE 0x00BE00BE 0x00BE00BE
0x00AF00C1 0x00B700C0 0x00BE00BE 0x00BE00BE
0x00AD00C5 0x00BA00CB 0x00BE00BE 0x00BE00BE
Byte1 0x00C900D7 0x00C500D0 0x00BE00BE 0x00BE00BE
0x00C300D0 0x00BF00C8 0x00BE00BE 0x00BE00BE
0x00B900C6 0x00BB00C5 0x00BE00BE 0x00BE00BE
0x00B700BF 0x00BD00C2 0x00BE00BE 0x00BE00BE
0x00B000B8 0x00AF00B5 0x00BE00BE 0x00BE00BE
0x00BA00C1 0x00B100BC 0x00BE00BE 0x00BE00BE
0x00BD00C4 0x00BB00C5 0x00BE00BE 0x00BE00BE
0x00BB00C5 0x00BE00CD 0x00BE00BE 0x00BE00BE
Byte2 0x00B600C5 0x00B200C6 0x00BE00BE 0x00BE00BE
0x00BC00D1 0x00B800C5 0x00BE00BE 0x00BE00BE
0x00AE00BE 0x00B200BA 0x00BE00BE 0x00BE00BE
0x009D00B5 0x00A800B9 0x00BE00BE 0x00BE00BE
0x00B100C4 0x00B100B7 0x00BE00BE 0x00BE00BE
0x00BB00C7 0x00B600BA 0x00BE00BE 0x00BE00BE
0x00AD00BC 0x00B900BA 0x00BE00BE 0x00BE00BE
0x00B100C2 0x00C100C4 0x00BE00BE 0x00BE00BE
Byte3 0x00BB00C1 0x00B500C3 0x00BE00BE 0x00BE00BE
0x00BF00BF 0x00B300BA 0x00BE00BE 0x00BE00BE
0x00B800B8 0x00B900C1 0x00BE00BE 0x00BE00BE
0x00B500BC 0x00B600C2 0x00BE00BE 0x00BE00BE
0x00AB00B9 0x00AA00B4 0x00BE00BE 0x00BE00BE
0x00AF00B6 0x00A900B4 0x00BE00BE 0x00BE00BE
0x00B700C2 0x00B800C4 0x00BE00BE 0x00BE00BE
0x00B700C3 0x00BB00CA 0x00BE00BE 0x00BE00BE
Byte4 0x00BF00C3 0x00BB00C2 0x00BE00BE 0x00BE00BE
0x00BE00C7 0x00B900C1 0x00BE00BE 0x00BE00BE
0x00B000B9 0x00B400B9 0x00BE00BE 0x00BE00BE
0x00AA00B6 0x00B300BC 0x00BE00BE 0x00BE00BE
0x00AD00C7 0x00AC00B8 0x00BE00BE 0x00BE00BE
0x00B700C1 0x00B000BC 0x00BE00BE 0x00BE00BE
0x00AC00C3 0x00B300C2 0x00BE00BE 0x00BE00BE
0x00B000D2 0x00C000D0 0x00BE00BE 0x00BE00BE
Byte5 0x00C400CC 0x00BD00D2 0x00BE00BE 0x00BE00BE
0x00C100D2 0x00BA00CD 0x00BE00BE 0x00BE00BE
0x00B800C7 0x00B800CC 0x00BE00BE 0x00BE00BE
0x00B500BF 0x00BA00CB 0x00BE00BE 0x00BE00BE
0x00AE00BD 0x00AD00BC 0x00BE00BE 0x00BE00BE
0x00B700C8 0x00B300C4 0x00BE00BE 0x00BE00BE
0x00B900C6 0x00C000CB 0x00BE00BE 0x00BE00BE
0x00C100CF 0x00C300D0 0x00BE00BE 0x00BE00BE
Byte6 0x00BB00C6 0x00B600CF 0x00BE00BE 0x00BE00BE
0x00BD00C8 0x00B900C8 0x00BE00BE 0x00BE00BE
0x00B400C2 0x00BA00C7 0x00BE00BE 0x00BE00BE
0x00B400BF 0x00BB00C9 0x00BE00BE 0x00BE00BE
0x00C400CD 0x00BA00CE 0x00BE00BE 0x00BE00BE
0x00C500D1 0x00BF00CA 0x00BE00BE 0x00BE00BE
0x00BE00CE 0x00C800D1 0x00BE00BE 0x00BE00BE
0x00C100DA 0x00D200DC 0x00BE00BE 0x00BE00BE
Byte7 0x00C300CA 0x00BD00C6 0x00BE00BE 0x00BE00BE
0x00C000C9 0x00BC00C4 0x00BE00BE 0x00BE00BE
0x00B500BE 0x00BA00C6 0x00BE00BE 0x00BE00BE
0x00B100B9 0x00B300C0 0x00BE00BE 0x00BE00BE
0x00B000C6 0x00B500C0 0x00BE00BE 0x00BE00BE
0x00B100CF 0x00B000C2 0x00BE00BE 0x00BE00BE
0x00B600CB 0x00BF00CA 0x00BE00BE 0x00BE00BE
0x00C100D9 0x00CA00D8 0x00BE00BE 0x00BE00BE
Byte8 0x00B500C6 0x00B000C1 0x00BE00BE 0x00BE00BE
0x00B200C8 0x00B000BA 0x00BE00BE 0x00BE00BE
0x00A800B7 0x00AC00B2 0x00BE00BE 0x00BE00BE
0x00A500BD 0x00AA00BF 0x00BE00BE 0x00BE00BE
0x00B100B9 0x00B300B8 0x00BE00BE 0x00BE00BE
0x00C100BF 0x00B600BB 0x00BE00BE 0x00BE00BE
0x00B300B9 0x00BF00BE 0x00BE00BE 0x00BE00BE
0x00B400BF 0x00C300C9 0x00BE00BE 0x00BE00BE
PhyClkWrdqnSlaveDelay
Rank0 Rank1 Rank2 Rank3
Byte0 0x028B028C 0x02850284 0x02800280 0x02800280
0x028C028C 0x02830283 0x02800280 0x02800280
0x028C028D 0x02850285 0x02800280 0x02800280
0x028D028B 0x02850286 0x02800280 0x02800280
Byte1 0x028B0289 0x02890289 0x02800280 0x02800280
0x028A028A 0x028B028A 0x02800280 0x02800280
0x0289028C 0x02880289 0x02800280 0x02800280
0x028B028B 0x0289028A 0x02800280 0x02800280
Byte2 0x028E028A 0x02860284 0x02800280 0x02800280
0x028B028B 0x02880284 0x02800280 0x02800280
0x028B028E 0x02870289 0x02800280 0x02800280
0x028C028E 0x02830286 0x02800280 0x02800280
Byte3 0x028A028A 0x02920291 0x02800280 0x02800280
0x0289028A 0x02910291 0x02800280 0x02800280
0x028A028C 0x02910292 0x02800280 0x02800280
0x028B028D 0x028F0291 0x02800280 0x02800280
Byte4 0x028C028E 0x028A028B 0x02800280 0x02800280
0x028E028C 0x028A028B 0x02800280 0x02800280
0x028F028D 0x028B028C 0x02800280 0x02800280
0x028C028C 0x028A028B 0x02800280 0x02800280
Byte5 0x028B028D 0x02880289 0x02800280 0x02800280
0x0289028C 0x02860288 0x02800280 0x02800280
0x028B028D 0x02860289 0x02800280 0x02800280
0x028C028A 0x02850287 0x02800280 0x02800280
Byte6 0x027F0281 0x027A027A 0x02800280 0x02800280
0x02820282 0x027A027C 0x02800280 0x02800280
0x02800282 0x027B027B 0x02800280 0x02800280
0x02830281 0x027B027A 0x02800280 0x02800280
Byte7 0x027E0281 0x02850285 0x02800280 0x02800280
0x027E027E 0x02810285 0x02800280 0x02800280
0x027F027D 0x02810281 0x02800280 0x02800280
0x027F027E 0x02870284 0x02800280 0x02800280
Byte8 0x02880289 0x02890288 0x02800280 0x02800280
0x028A028A 0x02890289 0x02800280 0x02800280
0x02870287 0x02880288 0x02800280 0x02800280
0x028A0289 0x02890288 0x02800280 0x02800280
PHY Vref Vaule[0xC9F0]:0x09210000
PHY Vref Vaule[0xC9F4]:0x09210921
PHY Vref Vaule[0xC9F8]:0x09210921
PHY Vref Vaule[0xC9FC]:0x09210921
PHY Vref Vaule[0xCA00]:0x09210921
PHY Vref Vaule[0xCA04]:0x00000921
AC_MASTER_DLY_LOCK=0X0000010F.
DATA_MASTER_DLY_LOCK[0]=0X1A00011B.
DATA_MASTER_DLY_LOCK[1]=0X1A00011F.
DATA_MASTER_DLY_LOCK[2]=0X1A00011D.
DATA_MASTER_DLY_LOCK[3]=0X1A000119.
DATA_MASTER_DLY_LOCK[4]=0X19000117.
DATA_MASTER_DLY_LOCK[5]=0X1A000117.
DATA_MASTER_DLY_LOCK[6]=0X19000115.
DATA_MASTER_DLY_LOCK[7]=0X1A00011C.
DATA_MASTER_DLY_LOCK[8]=0X1A00011C.
0x603484A8 = 0x12345678
0x603484AC = 0x5A5A5A5A
0x603484B0 = 0x87654321
0x603484B4 = 0xA5A5A5A5
0x603484B8 = 0x0
0x603484BC = 0x0
0x603484C0 = 0xFFFFFFFF
0x603484C4 = 0xFFFFFFFF
0x603484C8 = 0xFF00FF00
Socket[0] Channel[0] DDR Init Finished!
========================================================================================
| socekt 0 |
========================================================================================
| Slot | Channel 0 | Channel 1 | Channel 2 | Channel 3 |
========================================================================================
| 0 | Samsung | NO DIMM | NO DIMM | NO DIMM |
| | IDT | | | |
| | 32GB(2RX4) | | | |
| | 2400 13-13-13 | | | |
| | ww182017 | | | |
| | M393A4K40BB1-CRC | | | |
| | | | | |
----------------------------------------------------------------------------------------
| 1 | NO DIMM | NO DIMM | NO DIMM | NO DIMM |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
----------------------------------------------------------------------------------------
| 2 | NO DIMM | NO DIMM | NO DIMM | NO DIMM |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
----------------------------------------------------------------------------------------
System ECC Enabled!
$$$Skt[0] Ch[0] Dimm[0] Rank[0].
$$$Skt[0] Ch[0] Dimm[0] Rank[1].
$$$Memory Clean Finish!
$$$ Config DAW
ColBits = 0xA
RowBits = 0x11
Banknum = 0x10
RankSize = 0x400000000
Ranknum = 0x2
DramWidth = 0x4
Size = 0x800000000
HHA Diretory Bypass
LowMemory(<4G):Base=0x0, Size=0x40000000
HighMemory(>4G):Base=0x2040000000, Size=0x3C0000000
HighMemory(>4G):Base=0x2040000000, Size=0x3C0000000
HighMemory(>4G):Base=0x2400000000, Size=0x400000000
MemTest Start
MemTest Finish
[ArmPlatformGetVirtualMemoryMap]:[144L] discriptor count=14
[ArmConfigureMmu]:[630L] TranslationTable=0x3FBFE000
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Core\Pei\PeiMain\DEBUG\PeiCore.dll 0x3FBE7260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\ArmPkg\Drivers\CpuPei\CpuPei\DEBUG\CpuPei.dll 0x3FBE3260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\PCD\Pei\Pcd\DEBUG\PcdPeim.dll 0x3FBDD260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\IntelFrameworkModulePkg\Universal\StatusCode\Pei\StatusCodePei\DEBUG\StatusCodePei.dll 0x3FBD9260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwProductsPkg\2PServer\BootLinuxConfig\BootLinuxConfigPeimHi1610\DEBUG\BootLinuxConfigPeim.dll 0x3FBD4260
SMMU CONFIG.........Done
AP CONFIG.........Done
MN CONFIG.........Done
PCIE RAM Address CONFIG.........Done
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Core\DxeIplPeim\DxeIpl\DEBUG\DxeIpl.dll 0x3FBCC260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Core\Dxe\DxeMain\DEBUG\DxeCore.dll 0x3F332260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Core\Dxe\DxeMain\DEBUG\DxeCore.dll 0x3F332000
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\ArmPkg\Drivers\CpuDxe\CpuDxe\DEBUG\ArmCpuDxe.dll 0x3F2A6800
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Core\RuntimeDxe\RuntimeDxe\DEBUG\RuntimeDxe.dll 0x3F2B0260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\SecurityStubDxe\SecurityStubDxe\DEBUG\SecurityStubDxe.dll 0x3F2A1260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\SmmuConfigDxe\SmmuConfigDxeHi1610\DEBUG\SmmuConfigDxe.dll 0x3F29D260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwProductsPkg\2PServer\Library\OemNicConfig2PHi1610\OemNicConfig2P\DEBUG\OemNicConfigPangea.dll 0x3F297260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Override\UefiCpuPkg\CpuIo2Dxe\CpuIo2Dxe\DEBUG\CpuIo2Dxe.dll 0x3F293260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\SFC\SfcDxeDriver\DEBUG\SFCDriver.dll 0x3A2D0260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\EmbeddedPkg\EmbeddedMonotonicCounter\EmbeddedMonotonicCounter\DEBUG\EmbeddedMonotonicCounter.dll 0x3A2C0260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\IntelFrameworkModulePkg\Universal\StatusCode\RuntimeDxe\StatusCodeRuntimeDxe\DEBUG\StatusCodeRuntimeDxe.dll 0x3A2B0260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\EmbeddedPkg\ResetRuntimeDxe\ResetRuntimeDxe\DEBUG\Reset.dll 0x3A2A0260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\EmbeddedPkg\RealTimeClockRuntimeDxe\RealTimeClockRuntimeDxe\DEBUG\RealTimeClock.dll 0x3A290260
Creat event for rtc.
Creat event for cpld Success .
Now RTC Time is : 2021-11-26 04:46:51
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\EmbeddedPkg\MetronomeDxe\MetronomeDxe\DEBUG\MetronomeDxe.dll 0x3F28F260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\HiiDatabaseDxe\HiiDatabaseDxe\DEBUG\HiiDatabase.dll 0x3F27B260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\EmbeddedPkg\SerialDxe\SerialDxe\DEBUG\SerialDxe.dll 0x3F277260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Override\ArmPlatformPkg\Drivers\SP805WatchdogDxe\SP805WatchdogDxe\DEBUG\SP805WatchdogDxe.dll 0x3F273260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Ipmi\IpmiInterfaceDxe\IpmiInterfaceDxe\DEBUG\IpmiInterfaceDxe.dll 0x3F26E260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\GetBmcInfoDxe\GetInfoFromBmc\DEBUG\GetInfoFromBmc.dll 0x3F269260
InfoFromBmc.ProductName Taishan 2180
InfoFromBmc.SerialNum To be filled by O.E.M.
InfoFromBmc.ManufactureType02 Huawei
InfoFromBmc.ProductName02 BC11SPCC
InfoFromBmc.AssetTag To be filled by O.E.M.
InfoFromBmc.SrNumType02 023NXY10G6000115
InfoFromBmc.AssetTagType03 To be filled by O.E.M.
InfoFromBmc.SrNumType03 To be filled by O.E.M.
InfoFromBmc.VersionType03 To be filled by O.E.M.
InfoFromBmc.ChassisType03
InfoFromBmc.ManufacturerType03 Huawei
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\SmbiosDxe\SmbiosDxe\DEBUG\SmbiosDxe.dll 0x3F263260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Acpi\AcpiTableDxe\AcpiTableDxe\DEBUG\AcpiTableDxe.dll 0x3F25A260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\SerdesDxe\SerdesDxeDriver\DEBUG\SerdesDriver.dll 0x3F247260
[serdes_hilink0_init]:hilink0_mode pcie1 8 lane
Halt Macro 0 MCU!!
Macro 0 Download Firmware Success!!
Release Macro 0 MCU!!
[serdes_hilink1_init]:hilink1_mode pcie0 8 lane
Halt Macro 1 MCU!!
Macro 1 Download Firmware Success!!
Release Macro 1 MCU!!
[serdes_hilink2_init]:hilink2_mode pcie2 8 lane
Halt Macro 2 MCU!!
Macro 2 Download Firmware Success!!
Release Macro 2 MCU!!
Halt Macro 3 MCU!!
Macro 3 Download Firmware Success!!
Release Macro 3 MCU!!
Halt Macro 4 MCU!!
Macro 4 Download Firmware Success!!
Release Macro 4 MCU!!
[serdes_hilink5_init]:hilink5_mode sas1 4 lane
Halt Macro 5 MCU!!
Macro 5 Download Firmware Success!!
Release Macro 5 MCU!!
[serdes_hilink6_init] lane 0 =>sas1 lane 4
[serdes_hilink6_init] lane 1 =>sas1 lane 5
[serdes_hilink6_init] lane 2 =>sas1 lane 6
[serdes_hilink6_init] lane 3 =>sas1 lane 7
Halt Macro 6 MCU!!
Macro 6 Download Firmware Success!!
Release Macro 6 MCU!!
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Network\DpcDxe\DpcDxe\DEBUG\DpcDxe.dll 0x3F243260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\PciPlatform\PciPlatform\DEBUG\PciPlatform.dll 0x3F23F260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\MemoryTest\NullMemoryTestDxe\NullMemoryTestDxe\DEBUG\NullMemoryTestDxe.dll 0x3F23B260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\HwAllocateMemoryDxe\HwAllocateMemoryDxe\DEBUG\HwAllocateMemoryDxe.dll 0x3F237260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\DevicePathDxe\DevicePathDxe\DEBUG\DevicePathDxe.dll 0x3F22B260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\FlashFvbDxe\FlashFvbDxe\DEBUG\FlashFvbDxe.dll 0x3A260260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\FaultTolerantWriteDxe\FaultTolerantWriteDxe\DEBUG\FaultTolerantWriteDxe.dll 0x3F223260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\PL390Gic\PL390GicDxe\DEBUG\PL390GicDxe.dll 0x3F21F260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Smbios\SmbiosMiscDxe\SmbiosMiscDxe\DEBUG\SmbiosMiscDxe.dll 0x3F217260
SmbiosCreateTable() re-allocate SMBIOS 32-bit table
SmbiosCreate64BitTable() re-allocate SMBIOS 64-bit table
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\TransferSmbiosInfo\TransSmbiosInfo\DEBUG\TransSmbiosInfo.dll 0x3F213260
Create event for smbios table transfer success.
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\IpmiMiscOpDxe\IpmiMiscOpDxe\DEBUG\IpmiMiscOp.dll 0x3F20E260
VerStr:1.99
Create event for miscellaneous ipmi operation success.
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\IpmiWatchdogDxe\IpmiWatchdogDxe\DEBUG\IpmiWatchdogDxe.dll 0x3F20A260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Smbios\MemorySubClassDxe\MemorySubClassDxe\DEBUG\MemorySubClass.dll 0x3F203260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Smbios\ProcessorSubClassDxe\ProcessorSubClassDxe\DEBUG\ProcessorSubClass.dll 0x3F1FC260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Acpi\AcpiPlatformDxe\AcpiPlatformDxe\DEBUG\AcpiPlatform.dll 0x3F1F8260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\PciHostBridgeDxe1610\PciHostBridgeDxe\DEBUG\PciHostBridge.dll 0x3F1EF260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\ByoModulePkg\Setup\SetupBrowserDxe\SetupBrowserDxe\DEBUG\SetupBrowser.dll 0x3F1D5260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\IntelFrameworkModulePkg\Universal\BdsDxe\BdsDxe\DEBUG\BdsDxe.dll 0x3F19E260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Variable\RuntimeDxe\VariableRuntimeDxe\DEBUG\VariableRuntimeDxe.dll 0x3A1A0260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\TimerDxe_SOC\TimerDxe_SOC\DEBUG\ArmTimerDxe.dll 0x3F19A260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\ByoModulePkg\Setup\DisplayEngineDxe\DisplayEngineDxe\DEBUG\DisplayEngine.dll 0x3F184260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\CapsuleRuntimeDxe\CapsuleRuntimeDxe\DEBUG\CapsuleRuntimeDxe.dll 0x3A160260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Console\ConPlatformDxe\ConPlatformDxe\DEBUG\ConPlatformDxe.dll 0x3F17E260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Console\ConSplitterDxe\ConSplitterDxe\DEBUG\ConSplitterDxe.dll 0x3F175260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Console\GraphicsConsoleDxe\GraphicsConsoleDxe\DEBUG\GraphicsConsoleDxe.dll 0x3F16D260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Console\TerminalDxe\TerminalDxe\DEBUG\TerminalDxe.dll 0x3F164260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\ramdisk\ramdisk\DEBUG\ramdisk.dll 0x3F15F260
ramdisk:blckio install. Status=Success
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Disk\DiskIoDxe\DiskIoDxe\DEBUG\DiskIoDxe.dll 0x3F159260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Disk\PartitionDxe\PartitionDxe\DEBUG\PartitionDxe.dll 0x3F151260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\FatPkg\EnhancedFatDxe\Fat\DEBUG\Fat.dll 0x3F147260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Disk\UnicodeCollation\EnglishDxe\EnglishDxe\DEBUG\EnglishDxe.dll 0x3F143260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\EhciDxe\EhciDxe\DEBUG\EhciDxe.dll 0x3F137260
EhcCreateUsb2Hc: capability length 16
EhcDriverBindingStart: EHCI started for controller @ 3EC9A298
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Bus\Usb\UsbBusDxe\UsbBusDxe\DEBUG\UsbBusDxe.dll 0x3F12B260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Bus\Usb\UsbKbDxe\UsbKbDxe\DEBUG\UsbKbDxe.dll 0x3F123260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Bus\Usb\UsbMouseDxe\UsbMouseDxe\DEBUG\UsbMouseDxe.dll 0x3A2E6260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Bus\Usb\UsbMassStorageDxe\UsbMassStorageDxe\DEBUG\UsbMassStorageDxe.dll 0x3A157260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Security\SysPasswordDxe\SysPasswordDxe\DEBUG\SysPassword.dll 0x3A14E260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Network\SnpHi1610Dxe_PLAT\SnpPV600DxeMac0\DEBUG\SnpPV600Dxe.dll 0x3A140260
[gmac_initialize]:[3682L] GpriData=0x3CE72018
pPriv->ulMacSpeed:9
pPriv->ulMacDuplex:1
pPriv->ulPort:0
pPriv->ulGEBase:0xC7040000
pPriv->ulPpeCommonBase:0xC5070000
pPriv->ulPpeTNLBase:0xC5000000
pPriv->ulRCBCommonBase:0xC5080000
pPriv->ulRCBCommonEntryBase:0xC5080000
pPriv->ulRCBSramEntryBase:0xC5090000
pPriv->ulRingNum:0
pPriv->ulRingAddr:0
pPriv->ulMacAddr:0x60 0x8 0x10 0x90 0xC5 0x4B
DSAF_init
tbl_tcam_data
0x3F331C80:0x60081090 0xC54B0000 0x00000000 0x00000001
0x3F331C90:0x00000000
tbl_tcam_ucast
0x3F331C88:0x00000000 0x00000001 0x00000000 0x00000001
0x3F331C98:0x0000007F 0x00000000 0x0000007F 0x00000000
0x3F331CA8:0x00004BC5
----ok
LocateProtocol mOemXgeStatusProtocol success.
RXRING = 0x3CE6C000
TXRING = 0x3CE67000
pPriv->ulTxMask = 512
RXBUFF = 0x3CC66000
TXBUFF = 0x3CA65000
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Network\SnpHi1610Dxe_PLAT\SnpPV600DxeMac1\DEBUG\SnpPV600Dxe.dll 0x3A132260
[gmac_initialize]:[3682L] GpriData=0x3CA60018
pPriv->ulMacSpeed:9
pPriv->ulMacDuplex:1
pPriv->ulPort:1
pPriv->ulGEBase:0xC7044000
pPriv->ulPpeCommonBase:0xC5070000
pPriv->ulPpeTNLBase:0xC5010000
pPriv->ulRCBCommonBase:0xC5080000
pPriv->ulRCBCommonEntryBase:0xC5080000
pPriv->ulRCBSramEntryBase:0xC5090000
pPriv->ulRingNum:16
pPriv->ulRingAddr:1048576
pPriv->ulMacAddr:0x60 0x8 0x10 0x90 0xC5 0x4C
DSAF_init
tbl_tcam_data
0x3F331C80:0x60081090 0xC54C0001 0x00000000 0x00000001
0x3F331C90:0x00000000
tbl_tcam_ucast
0x3F331C88:0x00000000 0x00000001 0x00000000 0x00000001
0x3F331C98:0x0000008F 0x00000000 0x0000008F 0x90100860
0x3F331CA8:0x00004CC5
----ok
LocateProtocol mOemXgeStatusProtocol success.
RXRING = 0x3CA5B000
TXRING = 0x3CA56000
pPriv->ulTxMask = 512
RXBUFF = 0x3C855000
TXBUFF = 0x3C654000
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Network\SnpHi1610Dxe_PLAT\SnpPV600DxeMac4\DEBUG\SnpPV600Dxe.dll 0x3A124260
[gmac_initialize]:[3682L] GpriData=0x3C64D018
pPriv->ulMacSpeed:8
pPriv->ulMacDuplex:1
pPriv->ulPort:4
pPriv->ulGEBase:0xC7050000
pPriv->ulPpeCommonBase:0xC5070000
pPriv->ulPpeTNLBase:0xC5040000
pPriv->ulRCBCommonBase:0xC5080000
pPriv->ulRCBCommonEntryBase:0xC5080000
pPriv->ulRCBSramEntryBase:0xC5090000
pPriv->ulRingNum:64
pPriv->ulRingAddr:4194304
pPriv->ulMacAddr:0x60 0x8 0x10 0x90 0xC5 0x49
PhyID : 0x1410DD0
PhyAddr: 0x0
ETH_PhyInit 1916; Marvell 88E1512 detect!
MII_CTRL_REG = 0x3100
MII_STAT_REG = 0x7949
page 18, reg20:0x1
page 0, reg17:0x8040
Phy Init OK
DSAF_init
tbl_tcam_data
0x3F331C80:0x60081090 0xC5490004 0x00000000 0x00000001
0x3F331C90:0x00000000
tbl_tcam_ucast
0x3F331C88:0x00000000 0x00000001 0x00000000 0x00000001
0x3F331C98:0x000000BF 0x00000000 0x000000BF 0x00000000
0x3F331CA8:0x00000000
----ok
RXRING = 0x3C648000
TXRING = 0x3C643000
pPriv->ulTxMask = 512
RXBUFF = 0x3C442000
TXBUFF = 0x3C240000
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Network\SnpHi1610Dxe_PLAT\SnpPV600DxeMac5\DEBUG\SnpPV600Dxe.dll 0x3A116260
[gmac_initialize]:[3682L] GpriData=0x3C239018
pPriv->ulMacSpeed:8
pPriv->ulMacDuplex:1
pPriv->ulPort:5
pPriv->ulGEBase:0xC7054000
pPriv->ulPpeCommonBase:0xC5070000
pPriv->ulPpeTNLBase:0xC5050000
pPriv->ulRCBCommonBase:0xC5080000
pPriv->ulRCBCommonEntryBase:0xC5080000
pPriv->ulRCBSramEntryBase:0xC5090000
pPriv->ulRingNum:80
pPriv->ulRingAddr:5242880
pPriv->ulMacAddr:0x60 0x8 0x10 0x90 0xC5 0x4A
PhyID : 0x1410DD0
PhyAddr: 0x1
ETH_PhyInit 1916; Marvell 88E1512 detect!
MII_CTRL_REG = 0x3100
MII_STAT_REG = 0x7949
page 18, reg20:0x1
page 0, reg17:0x8000
Phy Init OK
DSAF_init
tbl_tcam_data
0x3F331C80:0x60081090 0xC54A0005 0x00000000 0x00000001
0x3F331C90:0x00000000
tbl_tcam_ucast
0x3F331C88:0x00000000 0x00000001 0x00000000 0x00000001
0x3F331C98:0x000000CF 0x00000000 0x000000CF 0x00000000
0x3F331CA8:0x00000000
----ok
RXRING = 0x3C234000
TXRING = 0x3C22F000
pPriv->ulTxMask = 512
RXBUFF = 0x3C02E000
TXBUFF = 0x3BE2C000
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Network\ArpDxe\ArpDxe\DEBUG\ArpDxe.dll 0x3A10E260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Network\Dhcp4Dxe\Dhcp4Dxe\DEBUG\Dhcp4Dxe.dll 0x3A102260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Network\Ip4ConfigDxe\Ip4ConfigDxe\DEBUG\Ip4ConfigDxe.dll 0x3A0F8260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Network\Ip4Dxe\Ip4Dxe\DEBUG\Ip4Dxe.dll 0x3A0EA260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Network\MnpDxe\MnpDxe\DEBUG\MnpDxe.dll 0x3A0DF260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Network\Mtftp4Dxe\Mtftp4Dxe\DEBUG\Mtftp4Dxe.dll 0x3A0D5260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Network\Tcp4Dxe\Tcp4Dxe\DEBUG\Tcp4Dxe.dll 0x3A0C3260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Network\Udp4Dxe\Udp4Dxe\DEBUG\Udp4Dxe.dll 0x3A0B9260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Universal\Network\UefiPxeBcDxe\UefiPxeBcDxe\DEBUG\UefiPxe4BcDxe.dll 0x3A0AD260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Pcie1610\PcieInitDxe\DEBUG\PcieInitDxe.dll 0x3A0A6260
Soc type is 1610
HostBridge 0, Port 0 Link up ok
Soc type is 1610
pcs locked timeout!
Check lane num Timeout !
HostBridge 0, Port 1 link down
Ltssm tracer host 0 port1 next wr addr: 0.
*********************************************
bit 31-16 15 14 13-12 11-10 9-6 5-0
00 0 1 0 0 0 C 1
01 0 1 0 0 0 0 0
02 0 1 0 0 0 C 1
03 0 1 0 0 0 0 0
04 0 1 0 0 0 C 1
05 0 1 0 0 0 0 0
06 0 1 0 0 0 C 1
07 0 1 0 0 0 0 0
08 0 1 0 0 0 C 1
09 0 1 0 0 0 0 0
0A 0 1 0 0 0 C 1
0B 0 1 0 0 0 0 0
0C 0 1 0 0 0 C 1
0D 0 1 0 0 0 0 0
0E 0 1 0 0 0 C 1
0F 0 1 0 0 0 0 0
10 0 1 0 0 0 C 1
11 0 1 0 0 0 0 0
12 0 1 0 0 0 C 1
13 0 1 0 0 0 0 0
14 0 1 0 0 0 C 1
15 0 1 0 0 0 0 0
16 0 1 0 0 0 C 1
17 0 1 0 0 0 0 0
18 0 1 0 0 0 C 1
19 0 1 0 0 0 0 0
1A 0 1 0 0 0 C 1
1B 0 1 0 0 0 0 0
1C 0 1 0 0 0 C 1
1D 0 1 0 0 0 0 0
1E 0 1 0 0 0 C 1
1F 0 1 0 0 0 0 0
20 0 1 0 0 0 C 1
21 0 1 0 0 0 0 0
22 0 1 0 0 0 C 1
23 0 1 0 0 0 0 0
24 0 1 0 0 0 C 1
25 0 1 0 0 0 0 0
26 0 1 0 0 0 C 1
27 0 1 0 0 0 0 0
28 0 1 0 0 0 C 1
29 0 1 0 0 0 0 0
2A 0 1 0 0 0 C 1
2B 0 1 0 0 0 0 0
2C 0 1 0 0 0 C 1
2D 0 1 0 0 0 0 0
2E 0 1 0 0 0 C 1
2F 0 1 0 0 0 0 0
30 0 1 0 0 0 C 1
31 0 1 0 0 0 0 0
32 0 1 0 0 0 C 1
33 0 1 0 0 0 0 0
34 0 1 0 0 0 C 1
35 0 1 0 0 0 0 0
36 0 1 0 0 0 C 1
37 0 1 0 0 0 0 0
38 0 1 0 0 0 C 1
39 0 1 0 0 0 0 0
3A 0 1 0 0 0 C 1
3B 0 1 0 0 0 0 0
3C 0 1 0 0 0 C 1
3D 0 1 0 0 0 0 0
3E 0 1 0 0 0 C 1
3F 0 1 0 0 0 0 0
*********************************************
Ltssm tracer host 0 port1 next wr addr: 8000.
Soc type is 1610
HostBridge 0, Port 2 Link up ok
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\MdeModulePkg\Bus\Pci\PciBusDxe\PciBusDxe\DEBUG\PciBusDxe.dll 0x3A091260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Sm750Dxe\UefiSmi\DEBUG\SmiGraphicsOutput.dll 0x3A089260
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\SasDxe\SasDxeDriver\DEBUG\SasDriverDxe.dll 0x3A04F260
SasDriverInitialize Ok!!!
[sas_init,2179]Card:1 init ok
[Higgs_StartPhy,178]Card:1 no cable on phy:0, default as electric cable
[SasScanDisk,853]Open Card:1 Phy:0 success!
[Higgs_StartPhy,178]Card:1 no cable on phy:1, default as electric cable
[Higgs_IntrInquiryOperation,211]Identify info:0x0,DevType:0--0,uiPhyContext:0x2
[Higgs_IntrInquiryOperation,217]Higgs_IntrInquiryOperation,uiIrqVal_mask:0x2,uiIrqVal:0x24,uiIrqVal_mask:0x2,uiEventIrqVal:256
[Higgs_PhyInitD2HFIS,185]phyid:1,Rate is 10
[SAINI_ClearPortRsc,450]Card:1 port:0 clr port rsc,remove all device from device list of Disc
[SAL_AbortSataDevIo,170]Now let's start AbortSataDev reset Io Card:1 msg:3BCF9018(uni id:0x0) to dev addr:0x0(sal dev:3BD01018) done func is NULL,v_pstMsg->stStatus.enDrvResp803
[SasScanDisk,853]Open Card:1 Phy:1 success!
[Higgs_StartPhy,178]Card:1 no cable on phy:2, default as electric cable
[SasScanDisk,853]Open Card:1 Phy:2 success!
[Higgs_StartPhy,178]Card:1 no cable on phy:3, default as electric cable
[SasScanDisk,853]Open Card:1 Phy:3 success!
[Higgs_StartPhy,178]Card:1 no cable on phy:4, default as electric cable
[Higgs_IntrInquiryOperation,211]Identify info:0x20010202,DevType:2--2,uiPhyContext:0x2
[Higgs_PhyCtrlUpDown,325]Higgs_PhyCtrlUpDown at uiPhyId = 0x4
[Higgs_PhyCtrlUpDown,339]uiPhyId:0x4, uiIrqVal:0x26
[Higgs_PhyUp,496]phyid:4,Rate is 11
[SAINI_ClearPortRsc,450]Card:1 port:1 clr port rsc,remove all device from device list of Disc
[SAL_SendSmp,775]Card:1 send smp request:3BCF9600 to dev:0x500E004AAAAAAA1F rsp failed.
[SAL_SendDiscSmp,857]Card:1 Send SMP request to dev:0x500E004AAAAAAA1F failed
[SAINI_ExpanderBufferStatusCheck,1195]Card:1 port:1 send SMP_EXP_BUF_SWITCH to expander:0x500E004AAAAAAA1F failed
[SAINI_ExpanderBufferSwitch,1301]Card:1 port:1 send REQUEST to expander:0x500E004AAAAAAA1F failed
[SAINI_DownStreamDiscovering,2381](downstream)Card:1 port:1 ExpanderBufferSwitch to dev:0x500E004AAAAAAA1F failed
[SAL_AbortSataDevIo,170]Now let's start AbortSataDev reset Io Card:1 msg:3BCF9FD8(uni id:0x0) to dev addr:0x500E004AAAAAAA02(sal dev:3BD01598) done func is NULL,v_pstMsg->stStatus.enDrvResp803
[SAL_AbortTaskSet,647]Now let's start abort SAS dev Io Card:1 msg:3BCFA5C0 to dev addr:0x500E004AAAAAAA1E(sal dev:3BD01858),v_pstMsg->stStatus.enDrvResp803,pstMsg->pfnDone:3A056958
[SasScanDisk,853]Open Card:1 Phy:4 success!
Success to register SasDevice:Port 0 SasAddr 0x 0, status = Success
Success to register SasDevice:Port 1 SasAddr 0x500E004AAAAAAA02, status = Success
SasDriverStart Ok!!!
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\UpdateFdtDxe\UpdateFdtDxe\DEBUG\UpdateFdtDxe.dll 0x3A045260
fdtfileaddress:--------- 0xA47C0000
Port0:0x60 0x8 0x10 0x90 0xC5 0x4B
Port1:0x60 0x8 0x10 0x90 0xC5 0x4C
Port4:0x60 0x8 0x10 0x90 0xC5 0x49
Port5:0x60 0x8 0x10 0x90 0xC5 0x4A
DawNum[0] = 0,DawNum[1] = 2,DawNum[2] =0,DawNum[3] =0
1 Base = 0x0, Size = 0x40000000
1 Base = 0x2000000000, Size = 0x800000000
NewFdtBlobBase: 0x3A030000 NewFdtBlobSize:0x8B69
FDTConfigTable Address: 0x3A030000
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\BmcSetSetupDxe\BmcSetSetupDxe\DEBUG\BmcSetSetupDxe.dll 0x3A029260
File has no changed
No file changed.
IsDislpayValid Done Status: Success
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\ByoModulePkg\PlatformSetupDxe\PlatformSetupDxe\DEBUG\PlatformSetupDxe.dll 0x3A001260
CheckDefaultSetupVariable()
Current configuration is invalid.
[IpmiInterfaceDxe] BtExecuteIpmiCmd failed.CompletionCode 0x80 ERROR.
[IpmiInterfaceDxe] BtExecuteIpmiCmd failed.CompletionCode 0x80 ERROR.
[IpmiInterfaceDxe] BtExecuteIpmiCmd failed.CompletionCode 0x80 ERROR.
[IpmiInterfaceDxe] BtExecuteIpmiCmd TIMEOUT.
Fail to get Business MgmtPortInfo from BMC.
[PortType]InfoId:InfoValue8=0x01:0x02
[PortOutType]InfoId:InfoValue8=0x02:0x02
[PortType]InfoId:InfoValue8=0x01:0x01
[PortOutType]InfoId:InfoValue8=0x02:0x02
[PortType]InfoId:InfoValue8=0x01:0x03
[PortOutType]InfoId:InfoValue8=0x02:0x02
Install GopDevicePath Handle 0
Install GopDevicePath Handle 3BC4BD18
Install GopDevicePath Status Success
SmiGraphicsOutputSetMode +
Resetting Memory
setModeEx +
programModeRegisters +
setModeEx -
SmiGraphicsOutputSetMode x=640 y=480
SmiGraphicsOutputSetMode -
SmiGraphicsOutputConstructor -
[=3h
[=3h
[=3h
[=3h
[=3h
[=3h
SmiGraphicsOutputQueryMode +
SmiGraphicsOutputQueryMode -
SmiGraphicsOutputQueryMode +
SmiGraphicsOutputQueryMode -
SmiGraphicsOutputQueryMode +
SmiGraphicsOutputQueryMode -
SmiGraphicsOutputQueryMode +
SmiGraphicsOutputQueryMode -
[=3h
SmiGraphicsOutputQueryMode +
SmiGraphicsOutputQueryMode -
[=3h
EhcGetState: current state 1
EhcGetCapability: 2 ports, 64 bit 0
UsbRootHubInit: root hub 3B27B018 - max speed 2, 2 ports
UsbEnumeratePort: port 0 state - 101, change - 01 on 3B27B018
UsbEnumeratePort: Device Connect/Disconnect Normally
UsbEnumeratePort: new device connected at port 0
UsbEnumerateNewDev: hub port 0 is reset
UsbEnumerateNewDev: device is of 2 speed
UsbEnumerateNewDev: device uses translator (0, 0)
UsbEnumerateNewDev: device is now ADDRESSED at 1
UsbEnumerateNewDev: max packet size for EP 0 is 64
UsbBuildDescTable: device has 1 configures
UsbGetOneConfig: total length is 41
UsbParseConfigDesc: config 1 has 1 interfaces
UsbParseInterfaceDesc: interface 0(setting 0) has 1 endpoints
UsbParseInterfaceDesc: interface 0(setting 1) has 1 endpoints
EhcExecTransfer: transfer with result 2
EhcControlTransfer: transfer - 2
UsbBuildDescTable: get language ID table Unsupported
UsbEnumerateNewDev: device 1 is now in CONFIGED state
UsbSelectConfig: config 1 selected for device 1
UsbSelectSetting: setting 0 selected for interface 0
UsbConnectDriver: found a hub device
UsbHubInit: hub 1 has 4 ports
UsbHubInit: hub 1 initialized
UsbEnumeratePort: port 1 state - 101, change - 01 on 3B27B018
UsbEnumeratePort: Device Connect/Disconnect Normally
UsbEnumeratePort: new device connected at port 1
UsbEnumerateNewDev: hub port 1 is reset
UsbEnumerateNewDev: device is of 2 speed
UsbEnumerateNewDev: device uses translator (0, 0)
UsbEnumerateNewDev: device is now ADDRESSED at 2
UsbEnumerateNewDev: max packet size for EP 0 is 64
UsbBuildDescTable: device has 1 configures
UsbGetOneConfig: total length is 41
UsbParseConfigDesc: config 1 has 1 interfaces
UsbParseInterfaceDesc: interface 0(setting 0) has 1 endpoints
UsbParseInterfaceDesc: interface 0(setting 1) has 1 endpoints
EhcExecTransfer: transfer with result 2
EhcControlTransfer: transfer - 2
UsbBuildDescTable: get language ID table Unsupported
UsbEnumerateNewDev: device 2 is now in CONFIGED state
UsbSelectConfig: config 1 selected for device 2
UsbSelectSetting: setting 0 selected for interface 0
UsbConnectDriver: found a hub device
UsbHubInit: hub 2 has 4 ports
UsbHubInit: hub 2 initialized
UsbEnumeratePort: port 0 state - 301, change - 01 on 3B27BC58
UsbEnumeratePort: Device Connect/Disconnect Normally
UsbEnumeratePort: new device connected at port 0
UsbEnumerateNewDev: hub port 0 is reset
UsbEnumerateNewDev: device is of 1 speed
UsbEnumerateNewDev: device uses translator (1, 1)
UsbEnumerateNewDev: device is now ADDRESSED at 3
UsbEnumerateNewDev: max packet size for EP 0 is 8
UsbBuildDescTable: device has 1 configures
UsbGetOneConfig: total length is 59
UsbParseConfigDesc: config 1 has 2 interfaces
UsbParseInterfaceDesc: interface 0(setting 0) has 1 endpoints
UsbParseInterfaceDesc: interface 1(setting 0) has 1 endpoints
UsbEnumerateNewDev: device 3 is now in CONFIGED state
UsbSelectConfig: config 1 selected for device 3
UsbSelectSetting: setting 0 selected for interface 0
UsbSelectSetting: setting 0 selected for interface 1
UsbSelectConfig: failed to connect driver Not Found, ignored
UsbEnumeratePort: port 0 state - 101, change - 01 on 3B2779D8
UsbEnumeratePort: Device Connect/Disconnect Normally
UsbEnumeratePort: new device connected at port 0
UsbEnumerateNewDev: hub port 0 is reset
UsbEnumerateNewDev: device is of 0 speed
UsbEnumerateNewDev: device uses translator (2, 1)
UsbEnumerateNewDev: device is now ADDRESSED at 4
UsbEnumerateNewDev: max packet size for EP 0 is 64
UsbBuildDescTable: device has 1 configures
UsbGetOneConfig: total length is 59
UsbParseConfigDesc: config 1 has 2 interfaces
UsbParseInterfaceDesc: interface 0(setting 0) has 1 endpoints
UsbParseInterfaceDesc: interface 1(setting 0) has 1 endpoints
UsbEnumerateNewDev: device 4 is now in CONFIGED state
UsbSelectConfig: config 1 selected for device 4
UsbSelectSetting: setting 0 selected for interface 0
UsbSelectSetting: setting 0 selected for interface 1
UsbBusStart: usb bus started on 3EC9A298, root hub 3B27B018
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\Smbios\AddSmbiosType9\AddSmbiosType9\DEBUG\AddSmbiosType9.dll 0x3A2E1260
PCIe device plot in slot Seg 0 bdf 1 0 0
add-symbol-file \Build\2PServerHi1610\RELEASE_ARMLINUXGCC\AARCH64\HwPkg\Drivers\ReportPciePlugDidVidToBmc\ReportPciePlugDidVidToBmc\DEBUG\ReportPciePlugDidVidToBmc.dll 0x3A040260
PCIe device plot in slot Seg 0 bdf 1 0 0
Slot[3]SetSystemInfo.PcieCardInfo.VIDSLOT 0x10B5 SetSystemInfo.PcieCardInfo.DIDSLOT 0x8724
ProductBdsPolicyHardDiskOrderFix - 900 Boot0000 DeviceType is UNKNOWN!
ProductBdsPolicyHardDiskOrderFix - 947 EFI_HARDDISK FOUND!
ProductBdsPolicyHardDiskOrderFix - 947 EFI_HARDDISK FOUND!
ProductBdsPolicyHardDiskOrderFix - 947 EFI_HARDDISK FOUND!
ProductBdsPolicyHardDiskOrderFix - 900 Boot0004 DeviceType is UNKNOWN!
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
OemBootGetImageHeader(1503):Open File Status : Not Found !
Press Delete to setup menu(F4 on Remote Keyboard)
Press F11 to boot manager
GetBmcBootOptionsSetting - 619 BootFlags is Invalid !
SmiGraphicsOutputQueryMode +
SmiGraphicsOutputQueryMode -
Loading driver at 0x00039F30000 EntryPoint=0x00039F31000
Now Do Stop POST Watchdog Timer.
SmiGraphicsOutputQueryMode +
SmiGraphicsOutputQueryMode -
SmiGraphicsOutputQueryMode +
SmiGraphicsOutputQueryMode -
SmiGraphicsOutputQueryMode +
SmiGraphicsOutputQueryMode -
error: no suitable video mode found.
GNU GRUB version 2.02+dfsg1-20+deb10u4
/----------------------------------------------------------------------------\
| Debian GNU/Linux, with Linux 4.19.90-2106.3.0.0095.oe1.aarch64 |
| Debian GNU/Linux, with Linux 4.19.90-2106.3.0.0095.oe1.aarch64 (recovery m>|
| Debian GNU/Linux, with Linux 4.19.0-18-arm64 |
| Debian GNU/Linux, with Linux 4.19.0-18-arm64 (recovery mode) |
|*Debian GNU/Linux, with Linux 4.1.44-06.151.vhulk1711.1.1.aarch64 |
| Debian GNU/Linux, with Linux 4.1.44-06.151.vhulk1711.1.1.aarch64 (recovery>|
| |
| |
| |
| |
| |
| |
\----------------------------------------------------------------------------/
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. ESC to return previous
menu.
The highlighted entry will be executed automatically in 0s.
Loading Linux 4.1.44-06.151.vhulk1711.1.1.aarch64 ...
Loading initial ramdisk ...
Loading driver at 0x00036E5A000 EntryPoint=0x00037C10850
EFI stub: Booting Linux Kernel...
EFI stub: Start to find FDT...
EFI stub: Found FDT by the fdt_guid
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
[SAL_EHClearAffiliation,358]unsupport direct dev, father sas addr:0x102030205060708
SAS ExitBootServicesEvent
EHCI ExitBootServicesEvent
PCI ExitBootServicesEvent
IPMI ExitBootService Event
TransferSmbiosToBMC EVENT.
Transfer Smbios Table To iBMC Success.
INTO SMMU ExitBootServicesEvent.
SMMU ExitBootServicesEvent.
SetOSWatchdog CountDown 3000. Status Success
ÿ[ 0.000000] Booting Linux on physical CPU 0x10000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.44-06.151.vhulk1711.1.1.aarch64 (abuild@armbuild10b175b113b111) (gcc version 4.9.3 20160525 (prerelease) (GCC) ) #1 SMP Mon Sep 10 15:53:51 UTC 2018
[ 0.000000] CPU: AArch64 Processor [411fd071] revision 1
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] alternatives: enabling workaround for ARM erratum 832075
[ 0.000000] alternatives: enabling workaround for ARM erratum 834220
[ 0.000000] alternatives: enabling workaround for MIDR_CORTEX_A57 VAR2
[ 0.000000] alternatives: detected feature: GIC system register CPU interface
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] EFI v2.50 by EDK II
[ 0.000000] efi: SMBIOS=0x3f2e0000 SMBIOS 3.0=0x3a250000 ACPI=0x3a280000 ACPI 2.0=0x3a280014
[ 0.000000] detected reserve_kbox_mem_len=0, skip reserve kbox memory.
[ 0.000000] numa: Adding memblock [0x0 - 0x3fbfffff] on node 1
[ 0.000000] numa: Adding memblock [0x2040000000 - 0x27ffffffff] on node 1
[ 0.000000] OF: NUMA: parsing numa-distance-map-v1
[ 0.000000] numa: Initmem setup node 0 [mem 0x00000000-0xffffffffffffffff]
[ 0.000000] numa: NODE_DATA [mem 0x27fffe1800-0x27fffe32bf]
[ 0.000000] numa: NODE_DATA(0) on node 1
[ 0.000000] numa: Initmem setup node 1 [mem 0x00000000-0x27ffffffff]
[ 0.000000] numa: NODE_DATA [mem 0x27fffdfd40-0x27fffe17ff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000027ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 1: [mem 0x0000000000000000-0x000000003fbfffff]
[ 0.000000] node 1: [mem 0x0000002040000000-0x00000027ffffffff]
[ 0.000000] Could not find start_pfn for node 0
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000000000000]
[ 0.000000] Initmem setup node 1 [mem 0x0000000000000000-0x00000027ffffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] PERCPU: Embedded 18 pages/cpu @ffff8027ffcb8000 s34392 r8192 d31144 u73728
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 8256528
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.44-06.151.vhulk1711.1.1.aarch64 root=UUID=cd3f076b-7721-4f08-890b-c3f53718ce8d ro console=tty1 console=ttyS0,115200
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 126976 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 262144 bytes
[ 0.000000] early log buf free: 12612(76%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x3b2b0000-0x3f2b0000] (64MB) mapped at [ffff80003b2b0000-ffff80003f2affff]
[ 0.000000] Memory: 32925648K/33550336K available (9714K kernel code, 1309K rwdata, 4296K rodata, 1664K init, 829K bss, 624688K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffff000000000000 - 0xffff7bffbfff0000 (126974 GB)
[ 0.000000] vmemmap : 0xffff7bffc0000000 - 0xffff7fffc0000000 ( 4096 GB maximum)
[ 0.000000] 0xffff7bffc0000000 - 0xffff7c0060000000 ( 2560 MB actual)
[ 0.000000] fixed : 0xffff7ffffabfd000 - 0xffff7ffffac00000 ( 12 KB)
[ 0.000000] PCI I/O : 0xffff7ffffae00000 - 0xffff7ffffbe00000 ( 16 MB)
[ 0.000000] modules : 0xffff7ffffc000000 - 0xffff800000000000 ( 64 MB)
[ 0.000000] memory : 0xffff800000000000 - 0xffff802800000000 (163840 MB)
[ 0.000000] .init : 0xffff800000e31000 - 0xffff800000fd1000 ( 1664 KB)
[ 0.000000] .text : 0xffff800000080000 - 0xffff800000e303d4 ( 14017 KB)
[ 0.000000] .data : 0xffff800000fd1000 - 0xffff800001118400 ( 1309 KB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=32.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] ITS: /interrupt-controller@6d000000/interrupt-controller@6c000000
[ 0.000000] ITS: allocated 65536 Devices @27df900000 (psz 4K, shr 1)
[ 0.000000] ITS: allocated 512 Virtual CPUs @27df8a1000 (psz 4K, shr 1)
[ 0.000000] ITS: allocated 512 Interrupt Collections @27df8a2000 (psz 4K, shr 1)
[ 0.000000] ITS: /interrupt-controller@6d000000/interrupt-controller@4c000000
[ 0.000000] ITS: allocated 65536 Devices @27df980000 (psz 4K, shr 1)
[ 0.000000] ITS: allocated 512 Virtual CPUs @27df8ab000 (psz 4K, shr 1)
[ 0.000000] ITS: allocated 512 Interrupt Collections @27df8ac000 (psz 4K, shr 1)
[ 0.000000] ITS: /interrupt-controller@6d000000/interrupt-controller@c6000000
[ 0.000000] ITS: allocated 524288 Devices @27df400000 (psz 16K, shr 1)
[ 0.000000] ITS: allocated 2048 Virtual CPUs @27df8d8000 (psz 4K, shr 1)
[ 0.000000] ITS: allocated 512 Interrupt Collections @27df8d6000 (psz 4K, shr 1)
[ 0.000000] GIC: using LPI property table @0x00000027df8f0000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] GICv3: CPU0: found redistributor 10000 region 1:0x000000004d100000
[ 0.000000] CPU0: using LPI pending table @0x00000027dfa00000
[ 0.000000] MBIGEN: /peripherals/interrupt-controller@4c030000
[ 0.000000] MBIGEN: /peripherals/interrupt-controller@6c030000
[ 0.000000] MBIGEN: /peripherals/interrupt-controller@d0080000
[ 0.000000] MBIGEN: /peripherals/interrupt-controller@c0080000
[ 0.000000] MBIGEN: /peripherals/interrupt-controller@a0080000
[ 0.000000] Architected cp15 timer(s) running at 50.00MHz (phys).
[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[ 0.000002] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[ 0.000109] Console: colour dummy device 80x25
[ 0.000513] console [tty1] enabled
[ 0.000522] kmemleak: Kernel memory leak detector disabled
[ 0.000553] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000576] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
[ 0.000591] pid_max: default: 32768 minimum: 301
[ 0.000630] Security Framework initialized
[ 0.005114] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.017877] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.023218] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.023295] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.023946] Initializing cgroup subsys blkio
[ 0.023957] Initializing cgroup subsys memory
[ 0.023989] Initializing cgroup subsys devices
[ 0.024002] Initializing cgroup subsys freezer
[ 0.024011] Initializing cgroup subsys net_cls
[ 0.024019] Initializing cgroup subsys perf_event
[ 0.024029] Initializing cgroup subsys net_prio
[ 0.024040] Initializing cgroup subsys hugetlb
[ 0.024061] ftrace: allocating 32870 entries in 129 pages
[ 0.094520] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.094557] Remapping and enabling EFI services.
[ 0.094564] EFI remap 0x000000003a030000 => 0000000040000000
[ 0.094582] EFI remap 0x000000003a160000 => 0000000040010000
[ 0.094590] EFI remap 0x000000003a170000 => 0000000040020000
[ 0.094602] EFI remap 0x000000003a1a0000 => 0000000040050000
[ 0.094610] EFI remap 0x000000003a240000 => 0000000040060000
[ 0.094620] EFI remap 0x000000003a260000 => 0000000040080000
[ 0.094628] EFI remap 0x000000003a290000 => 0000000040090000
[ 0.094644] EFI remap 0x000000003f2b0000 => 00000000400e0000
[ 0.094652] EFI remap 0x000000003f2d0000 => 00000000400f0000
[ 0.094664] EFI remap 0x0000000078000000 => 0000000040120000
[ 0.094671] EFI remap 0x00000000a4000000 => 0000000040200000
[ 0.094678] EFI remap 0x00000000a6000000 => 0000000041200000
[ 0.094688] EFI remap 0x00000000d00e0000 => 0000000041210000
[ 0.101264] CPU1: Booted secondary processor
[ 0.101267] Detected PIPT I-cache on CPU1
[ 0.101286] GICv3: CPU1: found redistributor 10001 region 1:0x000000004d130000
[ 0.101313] CPU1: using LPI pending table @0x00000027dbd60000
[ 0.106589] CPU2: Booted secondary processor
[ 0.106591] Detected PIPT I-cache on CPU2
[ 0.106597] GICv3: CPU2: found redistributor 10002 region 1:0x000000004d160000
[ 0.106624] CPU2: using LPI pending table @0x00000027dbd90000
[ 0.111873] CPU3: Booted secondary processor
[ 0.111875] Detected PIPT I-cache on CPU3
[ 0.111881] GICv3: CPU3: found redistributor 10003 region 1:0x000000004d190000
[ 0.111908] CPU3: using LPI pending table @0x00000027dbdc0000
[ 0.117165] CPU4: Booted secondary processor
[ 0.117168] Detected PIPT I-cache on CPU4
[ 0.117176] GICv3: CPU4: found redistributor 10100 region 1:0x000000004d1c0000
[ 0.117205] CPU4: using LPI pending table @0x00000027dbe20000
[ 0.122467] CPU5: Booted secondary processor
[ 0.122469] Detected PIPT I-cache on CPU5
[ 0.122474] GICv3: CPU5: found redistributor 10101 region 1:0x000000004d1f0000
[ 0.122502] CPU5: using LPI pending table @0x00000027dbe50000
[ 0.127758] CPU6: Booted secondary processor
[ 0.127760] Detected PIPT I-cache on CPU6
[ 0.127765] GICv3: CPU6: found redistributor 10102 region 1:0x000000004d220000
[ 0.127793] CPU6: using LPI pending table @0x00000027dbe80000
[ 0.133047] CPU7: Booted secondary processor
[ 0.133050] Detected PIPT I-cache on CPU7
[ 0.133055] GICv3: CPU7: found redistributor 10103 region 1:0x000000004d250000
[ 0.133083] CPU7: using LPI pending table @0x00000027dbec0000
[ 0.138345] CPU8: Booted secondary processor
[ 0.138348] Detected PIPT I-cache on CPU8
[ 0.138356] GICv3: CPU8: found redistributor 10200 region 1:0x000000004d280000
[ 0.138385] CPU8: using LPI pending table @0x00000027dbf10000
[ 0.143643] CPU9: Booted secondary processor
[ 0.143645] Detected PIPT I-cache on CPU9
[ 0.143651] GICv3: CPU9: found redistributor 10201 region 1:0x000000004d2b0000
[ 0.143679] CPU9: using LPI pending table @0x00000027dbf40000
[ 0.148933] CPU10: Booted secondary processor
[ 0.148936] Detected PIPT I-cache on CPU10
[ 0.148941] GICv3: CPU10: found redistributor 10202 region 1:0x000000004d2e0000
[ 0.148969] CPU10: using LPI pending table @0x00000027dbf80000
[ 0.154219] CPU11: Booted secondary processor
[ 0.154222] Detected PIPT I-cache on CPU11
[ 0.154227] GICv3: CPU11: found redistributor 10203 region 1:0x000000004d310000
[ 0.154255] CPU11: using LPI pending table @0x00000027dbfc0000
[ 0.159527] CPU12: Booted secondary processor
[ 0.159531] Detected PIPT I-cache on CPU12
[ 0.159539] GICv3: CPU12: found redistributor 10300 region 1:0x000000004d340000
[ 0.159569] CPU12: using LPI pending table @0x00000027db800000
[ 0.164844] CPU13: Booted secondary processor
[ 0.164847] Detected PIPT I-cache on CPU13
[ 0.164853] GICv3: CPU13: found redistributor 10301 region 1:0x000000004d370000
[ 0.164880] CPU13: using LPI pending table @0x00000027db830000
[ 0.170149] CPU14: Booted secondary processor
[ 0.170151] Detected PIPT I-cache on CPU14
[ 0.170157] GICv3: CPU14: found redistributor 10302 region 1:0x000000004d3a0000
[ 0.170185] CPU14: using LPI pending table @0x00000027db880000
[ 0.175449] CPU15: Booted secondary processor
[ 0.175452] Detected PIPT I-cache on CPU15
[ 0.175457] GICv3: CPU15: found redistributor 10303 region 1:0x000000004d3d0000
[ 0.175485] CPU15: using LPI pending table @0x00000027db8b0000
[ 0.180714] CPU16: Booted secondary processor
[ 0.180717] Detected PIPT I-cache on CPU16
[ 0.180721] GICv3: CPU16: found redistributor 20000 region 0:0x000000006d100000
[ 0.180737] CPU16: using LPI pending table @0x00000027db8f0000
[ 0.185965] CPU17: Booted secondary processor
[ 0.185968] Detected PIPT I-cache on CPU17
[ 0.185972] GICv3: CPU17: found redistributor 20001 region 0:0x000000006d130000
[ 0.185987] CPU17: using LPI pending table @0x00000027db940000
[ 0.191185] CPU18: Booted secondary processor
[ 0.191188] Detected PIPT I-cache on CPU18
[ 0.191191] GICv3: CPU18: found redistributor 20002 region 0:0x000000006d160000
[ 0.191207] CPU18: using LPI pending table @0x00000027db970000
[ 0.196407] CPU19: Booted secondary processor
[ 0.196409] Detected PIPT I-cache on CPU19
[ 0.196413] GICv3: CPU19: found redistributor 20003 region 0:0x000000006d190000
[ 0.196429] CPU19: using LPI pending table @0x00000027db9b0000
[ 0.201637] CPU20: Booted secondary processor
[ 0.201640] Detected PIPT I-cache on CPU20
[ 0.201645] GICv3: CPU20: found redistributor 20100 region 0:0x000000006d1c0000
[ 0.201661] CPU20: using LPI pending table @0x00000027db9e0000
[ 0.206866] CPU21: Booted secondary processor
[ 0.206869] Detected PIPT I-cache on CPU21
[ 0.206873] GICv3: CPU21: found redistributor 20101 region 0:0x000000006d1f0000
[ 0.206889] CPU21: using LPI pending table @0x00000027dba30000
[ 0.212095] CPU22: Booted secondary processor
[ 0.212097] Detected PIPT I-cache on CPU22
[ 0.212101] GICv3: CPU22: found redistributor 20102 region 0:0x000000006d220000
[ 0.212117] CPU22: using LPI pending table @0x00000027dba70000
[ 0.217321] CPU23: Booted secondary processor
[ 0.217324] Detected PIPT I-cache on CPU23
[ 0.217328] GICv3: CPU23: found redistributor 20103 region 0:0x000000006d250000
[ 0.217344] CPU23: using LPI pending table @0x00000027dbaa0000
[ 0.222542] CPU24: Booted secondary processor
[ 0.222545] Detected PIPT I-cache on CPU24
[ 0.222551] GICv3: CPU24: found redistributor 20200 region 0:0x000000006d280000
[ 0.222569] CPU24: using LPI pending table @0x00000027dbaf0000
[ 0.227765] CPU25: Booted secondary processor
[ 0.227768] Detected PIPT I-cache on CPU25
[ 0.227772] GICv3: CPU25: found redistributor 20201 region 0:0x000000006d2b0000
[ 0.227790] CPU25: using LPI pending table @0x00000027dbb20000
[ 0.232989] CPU26: Booted secondary processor
[ 0.232992] Detected PIPT I-cache on CPU26
[ 0.232996] GICv3: CPU26: found redistributor 20202 region 0:0x000000006d2e0000
[ 0.233013] CPU26: using LPI pending table @0x00000027dbb60000
[ 0.238208] CPU27: Booted secondary processor
[ 0.238211] Detected PIPT I-cache on CPU27
[ 0.238215] GICv3: CPU27: found redistributor 20203 region 0:0x000000006d310000
[ 0.238232] CPU27: using LPI pending table @0x00000027dbba0000
[ 0.243447] CPU28: Booted secondary processor
[ 0.243450] Detected PIPT I-cache on CPU28
[ 0.243455] GICv3: CPU28: found redistributor 20300 region 0:0x000000006d340000
[ 0.243473] CPU28: using LPI pending table @0x00000027dbbf0000
[ 0.248686] CPU29: Booted secondary processor
[ 0.248689] Detected PIPT I-cache on CPU29
[ 0.248693] GICv3: CPU29: found redistributor 20301 region 0:0x000000006d370000
[ 0.248710] CPU29: using LPI pending table @0x00000027db410000
[ 0.253926] CPU30: Booted secondary processor
[ 0.253928] Detected PIPT I-cache on CPU30
[ 0.253932] GICv3: CPU30: found redistributor 20302 region 0:0x000000006d3a0000
[ 0.253949] CPU30: using LPI pending table @0x00000027db470000
[ 0.259163] CPU31: Booted secondary processor
[ 0.259165] Detected PIPT I-cache on CPU31
[ 0.259169] GICv3: CPU31: found redistributor 20303 region 0:0x000000006d3d0000
[ 0.259187] CPU31: using LPI pending table @0x00000027db4a0000
[ 0.259254] Brought up 32 CPUs
[ 0.259847] SMP: Total of 32 processors activated.
[ 0.259852] CPU: All CPU(s) started at EL2
[ 0.259925] alternatives: patching kernel code
[ 0.263029] devtmpfs: initialized
[ 0.267893] SMBIOS 3.0.0 present.
[ 0.268116] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.268207] futex hash table entries: 8192 (order: 7, 524288 bytes)
[ 0.269625] xor: measuring software checksum speed
[ 0.306307] 8regs : 4741.000 MB/sec
[ 0.346328] 8regs_prefetch: 4401.000 MB/sec
[ 0.386349] 32regs : 4572.000 MB/sec
[ 0.426370] 32regs_prefetch: 4235.000 MB/sec
[ 0.426375] xor: using function: 8regs (4741.000 MB/sec)
[ 0.426430] pinctrl core: initialized pinctrl subsystem
[ 0.426900] NET: Registered protocol family 16
[ 0.438383] cpuidle: using governor ladder
[ 0.450389] cpuidle: using governor menu
[ 0.450430] vdso: 2 pages (1 code @ ffff800000fd9000, 1 data @ ffff800000fd8000)
[ 0.450441] vdso: 2 pages (1 code @ ffff8000009fd000, 1 data @ ffff800000fd8000)
[ 0.450500] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.450683] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.450754] Serial: AMBA PL011 UART driver
[ 0.464411] hisi-djtag peripherals:djtag@0: djtag init successfully.
[ 0.464439] hisi-djtag peripherals:djtag@1: djtag init successfully.
[ 0.464490] hisi-djtag djtag@2: djtag init successfully.
[ 0.546469] raid6: int64x1 gen() 1172 MB/s
[ 0.614520] raid6: int64x1 xor() 1221 MB/s
[ 0.682554] raid6: int64x2 gen() 1568 MB/s
[ 0.750607] raid6: int64x2 xor() 1699 MB/s
[ 0.818639] raid6: int64x4 gen() 2238 MB/s
[ 0.886677] raid6: int64x4 xor() 1741 MB/s
[ 0.954727] raid6: int64x8 gen() 2812 MB/s
[ 1.022777] raid6: int64x8 xor() 1737 MB/s
[ 1.090830] raid6: neonx1 gen() 2400 MB/s
[ 1.158875] raid6: neonx2 gen() 3169 MB/s
[ 1.226925] raid6: neonx4 gen() 4428 MB/s
[ 1.294967] raid6: neonx8 gen() 4810 MB/s
[ 1.294973] raid6: using algorithm neonx8 gen() 4810 MB/s
[ 1.294978] raid6: using intx1 recovery algorithm
[ 1.295100] pcie_bus_config value 0 -> 2
[ 1.295157] PCI host bridge /pcie@0xa0090000 ranges:
[ 1.295168] MEM 0xb0000000..0xb7efffff -> 0xb0000000
[ 1.295175] IO 0xb7f10000..0xb7f1ffff -> 0x00000000
[ 1.295209] hisi-pcie-hip06 a0090000.pcie: already Link up
[ 1.295285] hisi-pcie-hip06 a0090000.pcie: PCI host bridge to bus 0000:00
[ 1.295294] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 1.295301] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xb7efffff]
[ 1.295308] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.298390] pci 0000:03:00.0: VF(n) BAR0 space: [mem 0xb0180000-0xb019ffff 64bit] (contains BAR0 for 32 VFs)
[ 1.298446] pci 0000:03:00.0: VF(n) BAR2 space: [mem 0xb01a0000-0xb01bffff 64bit] (contains BAR2 for 32 VFs)
[ 1.299080] pci_bus 0000:03: [bus 03-04] partially hidden behind bridge 0000:01 [bus 01]
[ 1.299235] pci_bus 0000:05: [bus 05] partially hidden behind bridge 0000:01 [bus 01]
[ 1.299285] pci_bus 0000:02: [bus 02-05] partially hidden behind bridge 0000:01 [bus 01]
[ 1.299317] pci 0000:00:00.0: bridge has subordinate 01 but max busn 05
[ 1.299421] pci 0000:00:00.0: BAR 14: assigned [mem 0xb0000000-0xb02fffff]
[ 1.299429] pci 0000:00:00.0: BAR 15: assigned [mem 0xb0300000-0xb04fffff 64bit pref]
[ 1.299439] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.299447] pci 0000:01:00.0: BAR 14: assigned [mem 0xb0000000-0xb01fffff]
[ 1.299455] pci 0000:01:00.0: BAR 15: assigned [mem 0xb0300000-0xb04fffff 64bit pref]
[ 1.299464] pci 0000:01:00.0: BAR 0: assigned [mem 0xb0200000-0xb023ffff]
[ 1.299480] pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.299487] pci 0000:02:00.0: BAR 14: assigned [mem 0xb0000000-0xb01fffff]
[ 1.299495] pci 0000:02:00.0: BAR 15: assigned [mem 0xb0300000-0xb04fffff 64bit pref]
[ 1.299504] pci 0000:02:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.299512] pci 0000:03:00.0: BAR 0: assigned [mem 0xb0300000-0xb037ffff 64bit pref]
[ 1.299555] pci 0000:03:00.0: BAR 2: assigned [mem 0xb0000000-0xb003ffff 64bit]
[ 1.299597] pci 0000:03:00.0: BAR 4: assigned [mem 0xb0040000-0xb007ffff 64bit]
[ 1.299640] pci 0000:03:00.0: BAR 7: assigned [mem 0xb0080000-0xb009ffff 64bit]
[ 1.299682] pci 0000:03:00.0: BAR 9: assigned [mem 0xb00a0000-0xb00bffff 64bit]
[ 1.299725] pci 0000:02:00.0: PCI bridge to [bus 03-04]
[ 1.299736] pci 0000:02:00.0: bridge window [io 0x1000-0x1fff]
[ 1.299755] pci 0000:02:00.0: bridge window [mem 0xb0000000-0xb01fffff]
[ 1.299771] pci 0000:02:00.0: bridge window [mem 0xb0300000-0xb04fffff 64bit pref]
[ 1.299797] pci 0000:02:08.0: PCI bridge to [bus 05]
[ 1.299843] pci 0000:01:00.0: PCI bridge to [bus 02-05]
[ 1.299853] pci 0000:01:00.0: bridge window [io 0x1000-0x1fff]
[ 1.299873] pci 0000:01:00.0: bridge window [mem 0xb0000000-0xb01fffff]
[ 1.299888] pci 0000:01:00.0: bridge window [mem 0xb0300000-0xb04fffff 64bit pref]
[ 1.299914] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.299920] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
[ 1.299928] pci 0000:00:00.0: bridge window [mem 0xb0000000-0xb02fffff]
[ 1.299935] pci 0000:00:00.0: bridge window [mem 0xb0300000-0xb04fffff 64bit pref]
[ 1.299949] pci 0000:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 1.300004] pci 0000:01:00.0: Max Payload Size set to 512/2048 (was 128), Max Read Rq 128
[ 1.300063] pci 0000:02:00.0: Max Payload Size set to 512/2048 (was 128), Max Read Rq 128
[ 1.300123] pci 0000:03:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 1.300182] pci 0000:02:08.0: Max Payload Size set to 512/2048 (was 128), Max Read Rq 128
[ 1.300260] PCI host bridge /pcie@0xa0200000 ranges:
[ 1.300270] MEM 0xb8000000..0xbfefffff -> 0xb8000000
[ 1.300276] IO 0xbff10000..0xbff1ffff -> 0x00000000
[ 1.573909] hisi-pcie-hip06 a0200000.pcie: pcs locked timeout!
[ 2.574032] hisi-pcie-hip06 a0200000.pcie: PCIe Link Failed! PLL Locked: 0x3
[ 2.574101] hisi-pcie-hip06 a0200000.pcie: PCI host bridge to bus 0000:20
[ 2.574109] pci_bus 0000:20: root bus resource [bus 20-3f]
[ 2.574116] pci_bus 0000:20: root bus resource [mem 0xb8000000-0xbfefffff]
[ 2.574123] pci_bus 0000:20: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
[ 2.574278] pci 0000:20:00.0: Primary bus is hard wired to 0
[ 2.574285] pci 0000:20:00.0: bridge configuration invalid ([bus 01-01]), reconfiguring
[ 2.574355] pci 0000:20:00.0: BAR 6: assigned [mem 0xb8000000-0xb801ffff pref]
[ 2.574365] pci 0000:20:00.0: PCI bridge to [bus 21]
[ 2.574378] pci 0000:20:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 2.574446] PCI host bridge /pcie@0xa00a0000 ranges:
[ 2.574455] MEM 0xa8000000..0xafefffff -> 0xa8000000
[ 2.574462] IO 0xaff10000..0xaff1ffff -> 0x00000000
[ 2.574486] hisi-pcie-hip06 a00a0000.pcie: already Link up
[ 2.574552] hisi-pcie-hip06 a00a0000.pcie: PCI host bridge to bus 0000:40
[ 2.574559] pci_bus 0000:40: root bus resource [bus 40-5f]
[ 2.574566] pci_bus 0000:40: root bus resource [mem 0xa8000000-0xafefffff]
[ 2.574573] pci_bus 0000:40: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
[ 2.574710] pci 0000:40:00.0: Primary bus is hard wired to 0
[ 2.574717] pci 0000:40:00.0: bridge configuration invalid ([bus 01-01]), reconfiguring
[ 2.579250] pci 0000:40:00.0: BAR 14: assigned [mem 0xa8000000-0xac7fffff]
[ 2.579259] pci 0000:40:00.0: BAR 15: assigned [mem 0xac800000-0xacbfffff 64bit pref]
[ 2.579268] pci 0000:40:00.0: BAR 13: assigned [io 0x20000-0x21fff]
[ 2.579276] pci 0000:41:00.0: BAR 14: assigned [mem 0xa8000000-0xabffffff]
[ 2.579284] pci 0000:41:00.0: BAR 15: assigned [mem 0xac800000-0xacbfffff 64bit pref]
[ 2.579293] pci 0000:41:00.0: BAR 0: assigned [mem 0xac000000-0xac03ffff]
[ 2.579308] pci 0000:41:00.0: BAR 13: assigned [io 0x20000-0x21fff]
[ 2.579316] pci 0000:42:01.0: BAR 14: assigned [mem 0xa8000000-0xaaffffff]
[ 2.579322] pci 0000:42:00.0: BAR 14: assigned [mem 0xab000000-0xab1fffff]
[ 2.579329] pci 0000:42:00.0: BAR 15: assigned [mem 0xac800000-0xac9fffff 64bit pref]
[ 2.579339] pci 0000:42:01.0: BAR 15: assigned [mem 0xaca00000-0xacbfffff 64bit pref]
[ 2.579348] pci 0000:42:00.0: BAR 13: assigned [io 0x20000-0x20fff]
[ 2.579354] pci 0000:42:01.0: BAR 13: assigned [io 0x21000-0x21fff]
[ 2.579361] pci 0000:42:00.0: PCI bridge to [bus 43]
[ 2.579371] pci 0000:42:00.0: bridge window [io 0x20000-0x20fff]
[ 2.579389] pci 0000:42:00.0: bridge window [mem 0xab000000-0xab1fffff]
[ 2.579403] pci 0000:42:00.0: bridge window [mem 0xac800000-0xac9fffff 64bit pref]
[ 2.579429] pci 0000:44:00.0: BAR 0: assigned [mem 0xa8000000-0xa9ffffff pref]
[ 2.579448] pci 0000:44:00.0: BAR 1: assigned [mem 0xaa000000-0xaa1fffff]
[ 2.579464] pci 0000:42:01.0: PCI bridge to [bus 44]
[ 2.579474] pci 0000:42:01.0: bridge window [io 0x21000-0x21fff]
[ 2.579491] pci 0000:42:01.0: bridge window [mem 0xa8000000-0xaaffffff]
[ 2.579506] pci 0000:42:01.0: bridge window [mem 0xaca00000-0xacbfffff 64bit pref]
[ 2.579531] pci 0000:42:02.0: PCI bridge to [bus 45]
[ 2.579572] pci 0000:42:08.0: PCI bridge to [bus 46]
[ 2.579614] pci 0000:41:00.0: PCI bridge to [bus 42-46]
[ 2.579624] pci 0000:41:00.0: bridge window [io 0x20000-0x21fff]
[ 2.579642] pci 0000:41:00.0: bridge window [mem 0xa8000000-0xabffffff]
[ 2.579662] pci 0000:41:00.0: bridge window [mem 0xac800000-0xacbfffff 64bit pref]
[ 2.579687] pci 0000:40:00.0: PCI bridge to [bus 41-46]
[ 2.579693] pci 0000:40:00.0: bridge window [io 0x20000-0x21fff]
[ 2.579701] pci 0000:40:00.0: bridge window [mem 0xa8000000-0xac7fffff]
[ 2.579708] pci 0000:40:00.0: bridge window [mem 0xac800000-0xacbfffff 64bit pref]
[ 2.579722] pci 0000:40:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 2.579772] pci 0000:41:00.0: Max Payload Size set to 512/1024 (was 128), Max Read Rq 128
[ 2.579825] pci 0000:42:00.0: Max Payload Size set to 512/1024 (was 128), Max Read Rq 128
[ 2.579878] pci 0000:42:01.0: Max Payload Size set to 512/1024 (was 128), Max Read Rq 128
[ 2.579937] pci 0000:44:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 2.579991] pci 0000:42:02.0: Max Payload Size set to 512/1024 (was 128), Max Read Rq 128
[ 2.580044] pci 0000:42:08.0: Max Payload Size set to 512/1024 (was 128), Max Read Rq 128
[ 2.580358] vgaarb: device added: PCI:0000:44:00.0,decodes=io+mem,owns=none,locks=none
[ 2.580369] vgaarb: loaded
[ 2.580374] vgaarb: bridge control possible 0000:44:00.0
[ 2.580518] SCSI subsystem initialized
[ 2.580739] usbcore: registered new interface driver usbfs
[ 2.580763] usbcore: registered new interface driver hub
[ 2.580859] usbcore: registered new device driver usb
[ 2.581067] pps_core: LinuxPPS API ver. 1 registered
[ 2.581075] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 2.581105] PTP clock support registered
[ 2.581272] EDAC MC: Ver: 3.0.0
[ 2.581797] NetLabel: Initializing
[ 2.581803] NetLabel: domain hash size = 128
[ 2.581808] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.581827] NetLabel: unlabeled traffic allowed by default
[ 2.581935] Switched to clocksource arch_sys_counter
[ 2.597150] FS-Cache: Loaded
[ 2.599930] NET: Registered protocol family 2
[ 2.600498] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.601146] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.601451] TCP: Hash tables configured (established 262144 bind 65536)
[ 2.601555] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 2.601731] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 2.601990] NET: Registered protocol family 1
[ 2.602156] RPC: Registered named UNIX socket transport module.
[ 2.602163] RPC: Registered udp transport module.
[ 2.602168] RPC: Registered tcp transport module.
[ 2.602174] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.602322] Unpacking initramfs...
[ 2.854407] Freeing initrd memory: 11740K
[ 2.854661] LLC: /peripherals/llc@0 is initialized.
[ 2.855090] LLC: /peripherals/llc@1 is initialized.
[ 2.855121] mem add: Die2 start:0x0, size:0x40000000
[ 2.855151] mem add: Die2 start:0x2000000000, size:0x800000000
[ 2.855181] mem add: Die2 start:0x200000000, size:0x100000000
[ 2.855210] mem add: Die2 start:0x300000000, size:0x100000000
[ 2.855498] LLC: mem [0x0, 0x40000000) @Die2 @region0
[ 2.855503] LLC: mem [0x200000000, 0x400000000) @Die2 @region1
[ 2.855509] LLC: mem [0x2000000000, 0x2800000000) @Die2 @region2
[ 2.855642] kvm [1]: 8-bit VMID
[ 2.855649] kvm [1]: IDMAP page: 9f0000
[ 2.855654] kvm [1]: HYP VA range: 800000000000:ffffffffffff
[ 2.856356] kvm [1]: Hyp mode initialized successfully
[ 2.856392] kvm [1]: vgic-v2@fe020000
[ 2.856439] kvm [1]: vgic interrupt IRQ1
[ 2.856446] kvm [1]: Invalid trigger for IRQ4, assuming level low
[ 2.856455] kvm [1]: virtual timer IRQ4
[ 2.860218] kvm: anon_vma_clone: 0xffff800000221550
[ 2.860226] kvm: copy_page_range: 0xffff800000214f18
[ 2.860231] kvm: split_vma: 0xffff80000021c040
[ 2.860236] kvm: kernel hotreplace state 0
[ 2.861117] Initialise system trusted keyring
[ 2.861163] audit: initializing netlink subsys (disabled)
[ 2.861184] audit: type=2000 audit(2.756:1): initialized
[ 2.861472] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 2.861479] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.864559] zpool: loaded
[ 2.864567] zbud: loaded
[ 2.864897] VFS: Disk quotas dquot_6.6.0
[ 2.864970] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.866115] NFS: Registering the id_resolver key type
[ 2.866128] Key type id_resolver registered
[ 2.866134] Key type id_legacy registered
[ 2.866146] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.866154] Installing knfsd (copyright (C) 1996 [email protected]).
[ 2.866695] Key type cifs.spnego registered
[ 2.866707] Key type cifs.idmap registered
[ 2.866879] Key type big_key registered
[ 2.868094] alg: No test for stdrng (krng)
[ 2.868111] NET: Registered protocol family 38
[ 2.868137] async_tx: api initialized (async)
[ 2.868149] Key type asymmetric registered
[ 2.868157] Asymmetric key parser 'x509' registered
[ 2.868190] bounce: pool size: 64 pages
[ 2.868211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.868301] io scheduler noop registered
[ 2.868309] io scheduler deadline registered (default)
[ 2.868375] io scheduler cfq registered
[ 2.874486] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[ 2.874493] pcieport 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.874499] pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.874506] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 2.874512] pcieport 0000:02:08.0: Signaling PME through PCIe PME interrupt
[ 2.874546] pcieport 0000:20:00.0: Signaling PME through PCIe PME interrupt
[ 2.874580] pcieport 0000:40:00.0: Signaling PME through PCIe PME interrupt
[ 2.874586] pcieport 0000:41:00.0: Signaling PME through PCIe PME interrupt
[ 2.874592] pcieport 0000:42:00.0: Signaling PME through PCIe PME interrupt
[ 2.874598] pcieport 0000:42:01.0: Signaling PME through PCIe PME interrupt
[ 2.874604] pci 0000:44:00.0: Signaling PME through PCIe PME interrupt
[ 2.874610] pcieport 0000:42:02.0: Signaling PME through PCIe PME interrupt
[ 2.874616] pcieport 0000:42:08.0: Signaling PME through PCIe PME interrupt
[ 2.874638] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.874676] pciehp 0000:02:00.0:pcie24: Slot #0 AttnBtn+ AttnInd+ PwrInd+ PwrCtrl+ MRL+ Interlock- NoCompl- LLActRep+
[ 2.874860] pciehp 0000:42:00.0:pcie24: Slot #0 AttnBtn+ AttnInd+ PwrInd+ PwrCtrl+ MRL+ Interlock- NoCompl- LLActRep+
[ 2.875036] pciehp 0000:42:01.0:pcie24: Slot #1 AttnBtn+ AttnInd+ PwrInd+ PwrCtrl+ MRL+ Interlock- NoCompl- LLActRep+
[ 2.875193] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.875311] hisifb: Hisilicon Driver version: v1.0.0
[ 2.875317] hisifb: no options.
[ 2.875358] hisifb: share->revid = 01
[ 2.875363] hisifb: disable 2d acceleration
[ 2.875368] hisifb: no specific g_option.
[ 2.875467] hisifb: video memory size = 16 mb
[ 2.876191] hisifb: video memory vaddr = ffff000007200000
[ 2.876197] hisifb: sm1711 mmio address = ffff000006f80000
[ 2.876211] hisifb: framebuffer #0 alloc okay
[ 2.876216] hisifb: use simul primary mode
[ 2.876221] hisifb: crtc->cursor.mmio = ffff0000070000f0
[ 2.876231] hisifb: ret = 5,fb_find_mode failed,with driver prepared modes
[ 2.876238] hisifb: success! use specified mode:800x600-16@60 in kernel prepared default modedb
[ 2.876247] hisifb: Member of info->var is :
[ 2.876247] xres=800
[ 2.876247] yres=600
[ 2.876247] xres_virtual=800
[ 2.876247] yres_virtual=600
[ 2.876247] xoffset=0
[ 2.876247] yoffset=0
[ 2.876247] bits_per_pixel=16
[ 2.876247] ...
[ 2.876279] hisifb: fix->smem_start = a8000000
[ 2.876285] hisifb: fix->smem_len = 1000000
[ 2.876289] hisifb: fix->mmio_start = aa000000
[ 2.876295] hisifb: fix->mmio_len = 200000
[ 2.876301] hisifb: Ready to register framebuffer #0.
[ 2.879423] hisifb: set output mode done
[ 2.918998] Console: switching to colour frame buffer device 100x37
[ 2.960870] hisifb: Accomplished register framebuffer #0.
[ 2.978630] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.979762] Hisilicon lpc uart is enabled
[ 2.980468] console [ttyS0] disabled
[ 3.002563] serial8250.10: ttyS0 at I/O 0x2f8 (irq = 0, base_baud = 115200) is a 16550A
[ 6.059337] console [ttyS0] enabled
[ 6.074638] 60300000.uart: ttyS1 at MMIO 0x60300000 (irq = 7, base_baud = 12500000) is a 16550A
[ 6.096535] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 6.120182] loop: module loaded
[ 6.137104] Loading iSCSI transport class v2.0-870.
[ 6.156464] rdac: device handler registered
[ 6.174318] hp_sw: device handler registered
[ 6.191802] emc: device handler registered
[ 6.209294] alua: device handler registered
[ 6.226430] iscsi: registered transport (tcp)
[ 6.244199] hisi_sas: driver version v1.2
[ 6.413196] scsi host0: hisi_sas
[ 6.549959] hisi_sas_v2_hw c3000000.sas: phy:0 hilink:2 lane:0
[ 6.569174] hisi_sas_v2_hw c3000000.sas: serdes_regbits_write 990: macro:2, lane:0, reg origin value = 0xa815, write value = 0xa815
[ 6.611416] hisi_sas_v2_hw c3000000.sas: phy:1 hilink:2 lane:1
[ 6.632805] hisi_sas_v2_hw c3000000.sas: serdes_regbits_write 990: macro:2, lane:1, reg origin value = 0xa815, write value = 0xa815
[ 6.677406] hisi_sas_v2_hw c3000000.sas: phy:2 hilink:2 lane:2
[ 6.699788] hisi_sas_v2_hw c3000000.sas: serdes_regbits_write 990: macro:2, lane:2, reg origin value = 0xa815, write value = 0xa815
[ 6.748160] hisi_sas_v2_hw c3000000.sas: phy:3 hilink:2 lane:3
[ 6.773578] hisi_sas_v2_hw c3000000.sas: serdes_regbits_write 990: macro:2, lane:3, reg origin value = 0xa815, write value = 0xa815
[ 6.823664] hisi_sas_v2_hw c3000000.sas: phy:4 hilink:2 lane:4
[ 6.849242] hisi_sas_v2_hw c3000000.sas: serdes_regbits_write 990: macro:2, lane:4, reg origin value = 0xa815, write value = 0xa815
[ 6.900403] hisi_sas_v2_hw c3000000.sas: phy:5 hilink:2 lane:5
[ 6.923877] hisi_sas_v2_hw c3000000.sas: serdes_regbits_write 990: macro:2, lane:5, reg origin value = 0xa815, write value = 0xa815
[ 6.970845] hisi_sas_v2_hw c3000000.sas: phy:6 hilink:2 lane:6
[ 6.992765] hisi_sas_v2_hw c3000000.sas: serdes_regbits_write 990: macro:2, lane:6, reg origin value = 0xa815, write value = 0xa815
[ 7.048545] hisi_sas_v2_hw c3000000.sas: phy:7 hilink:2 lane:7
[ 7.075881] hisi_sas_v2_hw c3000000.sas: serdes_regbits_write 990: macro:2, lane:7, reg origin value = 0xa815, write value = 0xa815
[ 7.275005] scsi host1: hisi_sas
[ 7.413925] hisi_sas_v2_hw a2000000.sas: hip06-sas-v2-quirk-amt
[ 7.436974] hisi_sas_v2_hw a2000000.sas: phy:0 hilink:5 lane:0
[ 7.460408] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:5, lane:0, reg origin value = 0x15, write value = 0x8015
[ 7.506623] hisi_sas_v2_hw a2000000.sas: phy:1 hilink:5 lane:1
[ 7.529777] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:5, lane:1, reg origin value = 0x15, write value = 0x8015
[ 7.582852] hisi_sas_v2_hw a2000000.sas: phy:2 hilink:5 lane:2
[ 7.607313] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:5, lane:2, reg origin value = 0x15, write value = 0x8015
[ 7.654741] hisi_sas_v2_hw a2000000.sas: phy:3 hilink:5 lane:3
[ 7.679937] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:5, lane:3, reg origin value = 0x15, write value = 0x8015
[ 7.728280] hisi_sas_v2_hw a2000000.sas: phy:4 hilink:6 lane:0
[ 7.753159] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:6, lane:0, reg origin value = 0x15, write value = 0x8015
[ 7.804103] hisi_sas_v2_hw a2000000.sas: phy:5 hilink:6 lane:1
[ 7.828547] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:6, lane:1, reg origin value = 0x8015, write value = 0x8015
[ 7.878062] hisi_sas_v2_hw a2000000.sas: phy:6 hilink:6 lane:2
[ 7.903718] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:6, lane:2, reg origin value = 0x8015, write value = 0x8015
[ 7.953731] hisi_sas_v2_hw a2000000.sas: phy:7 hilink:6 lane:3
[ 7.978060] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:6, lane:3, reg origin value = 0x8015, write value = 0x8015
[ 8.029460] hisi_sas_v2_hw a2000000.sas: phy:1 hilink:5 lane:1
[ 8.053962] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:5, lane:1, reg origin value = 0x8015, write value = 0x15
[ 8.106355] hisi_sas_v2_hw a2000000.sas: sata int phyup: phy1 link_rate=10 port=0
[ 8.142018] hisi_sas_v2_hw a2000000.sas: port formed:phy(1) linkrate(10) port(0) hardware port(0)
[ 8.170016] hisi_sas_v2_hw a2000000.sas: Alloc new sata index:1, SATA_DEV_BITMAP:0000000000000003
[ 8.181183] scsi host2: hisi_sas
[ 8.220179] hisi_sas_v2_hw a2000000.sas: alloc_dev_v2_hw sata_dev=1 sata_idx=1, device_id=0
[ 8.248530] hisi_sas_v2_hw a2000000.sas: device=ffff8027dae22a00, sas_address=5001000000000001, devid:0, phy=1, parent_type:sas_host
[ 8.301941] hisi_sas_v2_hw a3000000.sas: phy:0 hilink:6 lane:0
[ 8.327959] hisi_sas_v2_hw a3000000.sas: serdes_regbits_write 990: macro:6, lane:0, reg origin value = 0x8015, write value = 0x8015
[ 8.378494] hisi_sas_v2_hw a3000000.sas: phy:1 hilink:6 lane:1
[ 8.410240] hisi_sas_v2_hw a3000000.sas: serdes_regbits_write 990: macro:6, lane:1, reg origin value = 0x8015, write value = 0x8015
[ 8.463336] hisi_sas_v2_hw a3000000.sas: phy:2 hilink:6 lane:2
[ 8.465086] ata1.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
[ 8.465089] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 8.470596] ata1.00: configured for UDMA/133
[ 8.486233] scsi 1:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 8.486516] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 8.486745] sd 1:0:0:0: [sda] Write Protect is off
[ 8.486839] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.488548] sda: sda1 sda2 sda3
[ 8.489068] sd 1:0:0:0: [sda] Attached SCSI disk
[ 8.515280] hisi_sas_v2_hw a2000000.sas: phy:4 hilink:6 lane:0
[ 8.515308] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:6, lane:0, reg origin value = 0x8015, write value = 0x15
[ 8.515313] hisi_sas_v2_hw a2000000.sas: phyup: phy4 link_rate=11 port=1
[ 8.515319] hisi_sas_v2_hw a2000000.sas: phy:5 hilink:6 lane:1
[ 8.515345] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:6, lane:1, reg origin value = 0x8015, write value = 0x15
[ 8.515349] hisi_sas_v2_hw a2000000.sas: phyup: phy5 link_rate=11 port=1
[ 8.515355] hisi_sas_v2_hw a2000000.sas: phy:6 hilink:6 lane:2
[ 8.515379] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:6, lane:2, reg origin value = 0x8015, write value = 0x15
[ 8.515383] hisi_sas_v2_hw a2000000.sas: phyup: phy6 link_rate=11 port=1
[ 8.515387] hisi_sas_v2_hw a2000000.sas: phy:7 hilink:6 lane:3
[ 8.515411] hisi_sas_v2_hw a2000000.sas: serdes_regbits_write 990: macro:6, lane:3, reg origin value = 0x8015, write value = 0x15
[ 8.515415] hisi_sas_v2_hw a2000000.sas: phyup: phy7 link_rate=11 port=1
[ 8.518576] hisi_sas_v2_hw a2000000.sas: phyid:5 bcast change rcvd
[ 8.518633] hisi_sas_v2_hw a2000000.sas: phyid:6 bcast change rcvd
[ 8.518688] hisi_sas_v2_hw a2000000.sas: phyid:7 bcast change rcvd
[ 8.522000] hisi_sas_v2_hw a2000000.sas: port formed:phy(4) linkrate(11) port(1) hardware port(1)
[ 8.522195] hisi_sas_v2_hw a2000000.sas: alloc_dev_v2_hw sata_dev=0 sata_idx=-1, device_id=1
[ 8.522198] hisi_sas_v2_hw a2000000.sas: device=ffff8027d2cd4000, sas_address=500e004aaaaaaa1f, devid:1, phy=4, parent_type:sas_host
[ 8.525668] hisi_sas_v2_hw a2000000.sas: Alloc new sata index:2, SATA_DEV_BITMAP:0000000000000007
[ 8.525670] hisi_sas_v2_hw a2000000.sas: alloc_dev_v2_hw sata_dev=1 sata_idx=2, device_id=2
[ 8.525674] hisi_sas_v2_hw a2000000.sas: device=ffff8027d3278200, sas_address=500e004aaaaaaa02, devid:2, phy=2, parent_type:expander
[ 8.525695] hisi_sas_v2_hw a2000000.sas: cq: iptt:512, task:ffff8027d7b2fb00, stat:135, abort:0, cmpl_status:3, err_rcrd_xfrd:1,rspns_xfrd:0,error_phase:6,devid:2,phy:2,parent_type:expander,io_cfg_err_code:0,cfg_err_code:0
[ 8.525695] iptt:512 dw0:0x80,dw1:0x0,dw2:0x0,dw3:0x0
[ 8.525695] cmd_table:dw0:0x80027, dw1:0x0, dw2:0x0, dw3:0x4000000, dw4:0x0
[ 8.525708] hisi_sas_v2_hw a2000000.sas: abort tmf: task to dev 500e004aaaaaaa02 resp: 0x0 status 0x87
[ 8.525783] hisi_sas_v2_hw a2000000.sas: cq: iptt:512, task:ffff8027d3282000, stat:135, abort:0, cmpl_status:3, err_rcrd_xfrd:1,rspns_xfrd:0,error_phase:6,devid:2,phy:2,parent_type:expander,io_cfg_err_code:0,cfg_err_code:0
[ 8.525783] iptt:512 dw0:0x80,dw1:0x0,dw2:0x0,dw3:0x0
[ 8.525783] cmd_table:dw0:0x80027, dw1:0x0, dw2:0x0, dw3:0x4000000, dw4:0x0
[ 8.525791] hisi_sas_v2_hw a2000000.sas: abort tmf: task to dev 500e004aaaaaaa02 resp: 0x0 status 0x87
[ 8.525878] hisi_sas_v2_hw a2000000.sas: cq: iptt:512, task:ffff8027d3282000, stat:135, abort:0, cmpl_status:3, err_rcrd_xfrd:1,rspns_xfrd:0,error_phase:6,devid:2,phy:2,parent_type:expander,io_cfg_err_code:0,cfg_err_code:0
[ 8.525878] iptt:512 dw0:0x80,dw1:0x0,dw2:0x0,dw3:0x0
[ 8.525878] cmd_table:dw0:0x80027, dw1:0x0, dw2:0x0, dw3:0x4000000, dw4:0x0
[ 8.525886] hisi_sas_v2_hw a2000000.sas: abort tmf: task to dev 500e004aaaaaaa02 resp: 0x0 status 0x87
[ 8.525889] hisi_sas_v2_hw a2000000.sas: hisi_sas_softreset_ata_disk, ata disk 500e004aaaaaaa02 reset failed, device=ffff8027d3278200, phy=2, parent_type=expander, rc=5
[ 8.525974] hisi_sas_v2_hw a2000000.sas: cq: iptt:512, task:ffff8027d3282000, stat:135, abort:0, cmpl_status:3, err_rcrd_xfrd:1,rspns_xfrd:0,error_phase:6,devid:2,phy:2,parent_type:expander,io_cfg_err_code:0,cfg_err_code:0
[ 8.525974] iptt:512 dw0:0x80,dw1:0x0,dw2:0x0,dw3:0x0
[ 8.525974] cmd_table:dw0:0x80027, dw1:0x0, dw2:0x0, dw3:0x4000000, dw4:0x0
[ 8.525982] hisi_sas_v2_hw a2000000.sas: abort tmf: task to dev 500e004aaaaaaa02 resp: 0x0 status 0x87
[ 8.526070] hisi_sas_v2_hw a2000000.sas: cq: iptt:512, task:ffff8027d3282000, stat:135, abort:0, cmpl_status:3, err_rcrd_xfrd:1,rspns_xfrd:0,error_phase:6,devid:2,phy:2,parent_type:expander,io_cfg_err_code:0,cfg_err_code:0
[ 8.526070] iptt:512 dw0:0x80,dw1:0x0,dw2:0x0,dw3:0x0
[ 8.526070] cmd_table:dw0:0x80027, dw1:0x0, dw2:0x0, dw3:0x4000000, dw4:0x0
[ 8.526077] hisi_sas_v2_hw a2000000.sas: abort tmf: task to dev 500e004aaaaaaa02 resp: 0x0 status 0x87
[ 8.526166] hisi_sas_v2_hw a2000000.sas: cq: iptt:512, task:ffff8027d3282000, stat:135, abort:0, cmpl_status:3, err_rcrd_xfrd:1,rspns_xfrd:0,error_phase:6,devid:2,phy:2,parent_type:expander,io_cfg_err_code:0,cfg_err_code:0
[ 8.526166] iptt:512 dw0:0x80,dw1:0x0,dw2:0x0,dw3:0x0
[ 8.526166] cmd_table:dw0:0x80027, dw1:0x0, dw2:0x0, dw3:0x4000000, dw4:0x0
[ 8.526173] hisi_sas_v2_hw a2000000.sas: abort tmf: task to dev 500e004aaaaaaa02 resp: 0x0 status 0x87
[ 8.526176] hisi_sas_v2_hw a2000000.sas: hisi_sas_softreset_ata_disk, ata disk 500e004aaaaaaa02 reset failed, device=ffff8027d3278200, phy=2, parent_type=expander, rc=5
[ 8.526262] hisi_sas_v2_hw a2000000.sas: cq: iptt:512, task:ffff8027d3282000, stat:135, abort:0, cmpl_status:3, err_rcrd_xfrd:1,rspns_xfrd:0,error_phase:6,devid:2,phy:2,parent_type:expander,io_cfg_err_code:0,cfg_err_code:0
[ 8.526262] iptt:512 dw0:0x80,dw1:0x0,dw2:0x0,dw3:0x0
[ 8.526262] cmd_table:dw0:0x80027, dw1:0x0, dw2:0x0, dw3:0x4000000, dw4:0x0
[ 8.526269] hisi_sas_v2_hw a2000000.sas: abort tmf: task to dev 500e004aaaaaaa02 resp: 0x0 status 0x87
[ 8.526358] hisi_sas_v2_hw a2000000.sas: cq: iptt:512, task:ffff8027d3282000, stat:135, abort:0, cmpl_status:3, err_rcrd_xfrd:1,rspns_xfrd:0,error_phase:6,devid:2,phy:2,parent_type:expander,io_cfg_err_code:0,cfg_err_code:0
[ 8.526358] iptt:512 dw0:0x80,dw1:0x0,dw2:0x0,dw3:0x0
[ 8.526358] cmd_table:dw0:0x80027, dw1:0x0, dw2:0x0, dw3:0x4000000, dw4:0x0
[ 8.526365] hisi_sas_v2_hw a2000000.sas: abort tmf: task to dev 500e004aaaaaaa02 resp: 0x0 status 0x87
[ 8.526454] hisi_sas_v2_hw a2000000.sas: cq: iptt:512, task:ffff8027d3282000, stat:135, abort:0, cmpl_status:3, err_rcrd_xfrd:1,rspns_xfrd:0,error_phase:6,devid:2,phy:2,parent_type:expander,io_cfg_err_code:0,cfg_err_code:0
[ 8.526454] iptt:512 dw0:0x80,dw1:0x0,dw2:0x0,dw3:0x0
[ 8.526454] cmd_table:dw0:0x80027, dw1:0x0, dw2:0x0, dw3:0x4000000, dw4:0x0
[ 8.526461] hisi_sas_v2_hw a2000000.sas: abort tmf: task to dev 500e004aaaaaaa02 resp: 0x0 status 0x87
[ 8.526464] hisi_sas_v2_hw a2000000.sas: hisi_sas_softreset_ata_disk, ata disk 500e004aaaaaaa02 reset failed, device=ffff8027d3278200, phy=2, parent_type=expander, rc=5
[ 8.526619] hisi_sas_v2_hw a2000000.sas: alloc_dev_v2_hw sata_dev=0 sata_idx=-1, device_id=3
[ 8.526623] hisi_sas_v2_hw a2000000.sas: device=ffff8027d2dec000, sas_address=500e004aaaaaaa1e, devid:3, phy=24, parent_type:expander
[ 8.529941] hisi_sas_v2_hw a2000000.sas: port formed:phy(5) linkrate(11) port(1) hardware port(1)
[ 8.537933] hisi_sas_v2_hw a2000000.sas: port formed:phy(6) linkrate(11) port(1) hardware port(1)
[ 8.545934] hisi_sas_v2_hw a2000000.sas: port formed:phy(7) linkrate(11) port(1) hardware port(1)
[ 8.682123] hisi_sas_v2_hw a2000000.sas: cq: iptt:512, task:ffff8027d7b2fd00, stat:135, abort:0, cmpl_status:3, err_rcrd_xfrd:1,rspns_xfrd:0,error_phase:6,devid:2,phy:2,parent_type:expander,io_cfg_err_code:0,cfg_err_code:0
[ 8.682123] iptt:512 dw0:0x80,dw1:0x0,dw2:0x0,dw3:0x0
[ 8.682123] cmd_table:dw0:0xec8027, dw1:0xa0000000, dw2:0x0, dw3:0x8000000, dw4:0x0
[ 8.698827] scsi 1:0:1:0: Enclosure 12G SAS Expander RevB PQ: 0 ANSI: 6
[ 8.699538] hisi_sas_v2_hw a2000000.sas: found dev[2:5:2],parent_type:expander is gone
[ 11.989787] hisi_sas_v2_hw a3000000.sas: serdes_regbits_write 990: macro:6, lane:2, reg origin value = 0x15, write value = 0x8015
[ 12.044521] hisi_sas_v2_hw a3000000.sas: phy:3 hilink:6 lane:3
[ 12.071346] hisi_sas_v2_hw a3000000.sas: serdes_regbits_write 990: macro:6, lane:3, reg origin value = 0x15, write value = 0x8015
[ 12.131653] hisi_sas_v2_hw a3000000.sas: phy:4 hilink:255 lane:255
[ 12.158269] hisi_sas_v2_hw a3000000.sas: init_reg_v2_hw macro: 255 lane: 255 unused.
[ 12.187452] hisi_sas_v2_hw a3000000.sas: phy:5 hilink:255 lane:255
[ 12.214226] hisi_sas_v2_hw a3000000.sas: init_reg_v2_hw macro: 255 lane: 255 unused.
[ 12.241329] hisi_sas_v2_hw a3000000.sas: phy:6 hilink:255 lane:255
[ 12.266614] hisi_sas_v2_hw a3000000.sas: init_reg_v2_hw macro: 255 lane: 255 unused.
[ 12.299363] hisi_sas_v2_hw a3000000.sas: phy:7 hilink:255 lane:255
[ 12.330189] hisi_sas_v2_hw a3000000.sas: init_reg_v2_hw macro: 255 lane: 255 unused.
[ 12.363123] libphy: Fixed MDIO Bus: probed
[ 12.390013] CAN device driver interface
[ 12.416628] libphy: Hisilicon MII Bus: probed
[ 12.452148] marvell: module verification failed: signature and/or required key missing - tainting kernel
[ 14.212294] netif_napi_add() called with weight 256 on device eth%d
[ 14.253391] VFIO - User Level meta-driver version: 0.3
[ 14.276139] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.300156] ehci-pci: EHCI PCI platform driver
[ 14.321791] ehci-platform: EHCI generic platform driver
[ 14.343502] ehci-platform a7020000.usb_ehci: EHCI Host Controller
[ 14.366212] ehci-platform a7020000.usb_ehci: new USB bus registered, assigned bus number 1
[ 14.392356] ehci-platform a7020000.usb_ehci: irq 9, io mem 0xa7020000
[ 14.425927] ehci-platform a7020000.usb_ehci: USB 2.0 started, EHCI 1.00
[ 14.448550] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 14.472209] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.494495] usb usb1: Product: EHCI Host Controller
[ 14.514447] usb usb1: Manufacturer: Linux 4.1.44-06.151.vhulk1711.1.1.aarch64 ehci_hcd
[ 14.538825] usb usb1: SerialNumber: a7020000.usb_ehci
[ 14.559047] hub 1-0:1.0: USB hub found
[ 14.581522] hub 1-0:1.0: 2 ports detected
[ 14.605098] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 14.629464] ohci-pci: OHCI PCI platform driver
[ 14.649988] ohci-platform: OHCI generic platform driver
[ 14.669560] ohci-platform a7030000.usb_ohci: Generic Platform OHCI controller
[ 14.690376] ohci-platform a7030000.usb_ohci: new USB bus registered, assigned bus number 2
[ 14.712799] ohci-platform a7030000.usb_ohci: irq 8, io mem 0xa7030000
[ 14.793982] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.815429] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.838856] usb usb2: Product: Generic Platform OHCI controller
[ 14.859163] usb usb2: Manufacturer: Linux 4.1.44-06.151.vhulk1711.1.1.aarch64 ohci_hcd
[ 14.881390] usb usb2: SerialNumber: a7030000.usb_ohci
[ 14.901886] hub 2-0:1.0: USB hub found
[ 14.920196] hub 2-0:1.0: 2 ports detected
[ 14.940393] uhci_hcd: USB Universal Host Controller Interface driver
[ 14.961324] usbcore: registered new interface driver usbserial
[ 14.981222] usbcore: registered new interface driver usbserial_generic
[ 15.001632] usbserial: USB Serial support registered for generic
[ 15.013928] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 15.042401] mousedev: PS/2 mouse device common for all mice
[ 15.074674] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[ 15.095156] i2c /dev entries driver
[ 15.112228] md: linear personality registered for level -1
[ 15.131996] md: raid0 personality registered for level 0
[ 15.146276] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 15.146278] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 15.146566] hub 1-1:1.0: USB hub found
[ 15.146648] hub 1-1:1.0: 4 ports detected
[ 15.228255] md: raid1 personality registered for level 1
[ 15.247221] md: raid10 personality registered for level 10
[ 15.257920] usb 1-2: new high-speed USB device number 3 using ehci-platform
[ 15.288495] md: raid6 personality registered for level 6
[ 15.308586] md: raid5 personality registered for level 5
[ 15.327605] md: raid4 personality registered for level 4
[ 15.346183] md: faulty personality registered for level -5
[ 15.368120] EDAC MC0: Giving out device to module edac_ddrc controller 60340000.edacmc: DEV 60340000.edacmc (INTERRUPT)
[ 15.390276] usb 1-2: New USB device found, idVendor=0424, idProduct=2514
[ 15.390278] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 15.390567] hub 1-2:1.0: USB hub found
[ 15.390648] hub 1-2:1.0: 4 ports detected
[ 15.461924] usb 1-1.1: new low-speed USB device number 4 using ehci-platform
[ 15.510961] EDAC MC1: Giving out device to module edac_ddrc controller 60350000.edacmc: DEV 60350000.edacmc (INTERRUPT)
[ 15.549882] EDAC MC2: Giving out device to module edac_ddrc controller 40340000.edacmc: DEV 40340000.edacmc (INTERRUPT)
[ 15.560024] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2113
[ 15.560026] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 15.560027] usb 1-1.1: Product: Dell KB216 Wired Keyboard
[ 15.661921] usb 1-2.1: new full-speed USB device number 5 using ehci-platform
[ 15.703784] EDAC MC3: Giving out device to module edac_ddrc controller 40350000.edacmc: DEV 40350000.edacmc (INTERRUPT)
[ 15.752330] Warning: Mebigen device id should not be 0
[ 15.757149] usb 1-2.1: New USB device found, idVendor=12d1, idProduct=0003
[ 15.757152] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 15.757154] usb 1-2.1: Product: Keyboard/Mouse KVM 1.1.0
[ 15.855595] Warning: Mebigen device id should not be 0
[ 15.880849] Warning: Mebigen device id should not be 0
[ 15.906219] Warning: Mebigen device id should not be 0
[ 15.932315] Warning: Mebigen device id should not be 0
[ 15.956352] Warning: Mebigen device id should not be 0
[ 15.980170] Warning: Mebigen device id should not be 0
[ 16.003814] Warning: Mebigen device id should not be 0
[ 16.025619] Warning: Mebigen device id should not be 0
[ 16.047171] Warning: Mebigen device id should not be 0
[ 16.068742] Warning: Mebigen device id should not be 0
[ 16.089662] Warning: Mebigen device id should not be 0
[ 16.109067] Warning: Mebigen device id should not be 0
[ 16.129561] Warning: Mebigen device id should not be 0
[ 16.147400] Warning: Mebigen device id should not be 0
[ 16.165619] Warning: Mebigen device id should not be 0
[ 16.184397] Warning: Mebigen device id should not be 0
[ 16.202786] Warning: Mebigen device id should not be 0
[ 16.221279] Warning: Mebigen device id should not be 0
[ 16.237627] Warning: Mebigen device id should not be 0
[ 16.253736] hidraw: raw HID events driver (C) Jiri Kosina
[ 16.271788] input: Dell KB216 Wired Keyboard as /devices/platform/peripherals/a7020000.usb_ehci/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:2113.0001/input/input0
[ 16.362046] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-a7020000.usb_ehci-1.1/input0
[ 16.402971] input: Dell KB216 Wired Keyboard as /devices/platform/peripherals/a7020000.usb_ehci/usb1/1-1/1-1.1/1-1.1:1.1/0003:413C:2113.0002/input/input1
[ 16.494026] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-a7020000.usb_ehci-1.1/input1
[ 16.534713] input: Keyboard/Mouse KVM 1.1.0 as /devices/platform/peripherals/a7020000.usb_ehci/usb1/1-2/1-2.1/1-2.1:1.0/0003:12D1:0003.0003/input/input2
[ 16.630026] hid-generic 0003:12D1:0003.0003: input,hidraw2: USB HID v1.10 Keyboard [Keyboard/Mouse KVM 1.1.0] on usb-a7020000.usb_ehci-2.1/input0
[ 16.674696] input: Keyboard/Mouse KVM 1.1.0 as /devices/platform/peripherals/a7020000.usb_ehci/usb1/1-2/1-2.1/1-2.1:1.1/0003:12D1:0003.0004/input/input3
[ 16.722593] hid-generic 0003:12D1:0003.0004: input,hidraw3: USB HID v1.10 Mouse [Keyboard/Mouse KVM 1.1.0] on usb-a7020000.usb_ehci-2.1/input1
[ 16.772172] usbcore: registered new interface driver usbhid
[ 16.797470] usbhid: USB HID core driver
[ 16.822121] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 16.849250] arp_tables: (C) 2002 David S. Miller
[ 16.874218] Initializing XFRM netlink socket
[ 16.900932] NET: Registered protocol family 10
[ 16.928055] NET: Registered protocol family 17
[ 16.954382] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 17.011096] can: controller area network core (rev 20120528 abi 9)
[ 17.041122] NET: Registered protocol family 29
[ 17.070405] can: raw protocol (rev 20120528)
[ 17.100429] can: broadcast manager protocol (rev 20120528 t)
[ 17.132969] can: netlink gateway (rev 20130117) max_hops=1
[ 17.165233] 8021q: 802.1Q VLAN Support v1.8
[ 17.195320] Key type dns_resolver registered
[ 17.224069] mpls_gso: MPLS GSO support
[ 17.252673] Registered cp15_barrier emulation handler
[ 17.282493] Registered setend emulation handler
[ 17.310614] Loading compiled-in X.509 certificates
[ 17.338652] Loaded X.509 cert 'HUAWEI TECHNOLOGIES CO.,LTD: EulerOS Secure Boot (CA key): 1a412661a4403b900729e88be2ea065b1eb691c3'
[ 17.395887] registered taskstats version 1
[ 17.423113] input: gpio_keys as /devices/platform/gpio_keys/input/input4
[ 17.465948] rtc-efi rtc-efi: setting system clock to 2021-11-26 04:48:42 UTC (1637902122)
[ 17.497382] Freeing unused kernel memory: 1664K
[ 17.522614] This architecture does not have kernel memory protection.
Loading, please wait...
Starting version 241
[ 17.753755] ses 1:0:1:0: Attached Enclosure device
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting roo[ 17.959489] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
t file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 18.120607] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 18.191980] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 10 (buster)!
[ 18.238154] systemd[1]: Set hostname to <debian>.
[ 18.308842] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 18.359805] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 18.474114] random: systemd urandom read with 19 bits of entropy available
[ 18.500514] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 18.554864] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 18.607106] systemd[1]: Started Continuously removing /dev/shm.
[ OK ] Started Continuously removing /dev/shm.
[ 18.658689] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ 18.734100] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 18.794163] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 18.846298] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 18.898222] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 18.949791] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 18.995020] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 19.046961] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 19.098227] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 19.150133] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 19.199743] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 19.245707] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 19.290977] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 19.338281] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 19.390948] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of re…odes for the current kernel...
[ 19.466088] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 19.522244] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 19.571002] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 19.614147] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 19.662954] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 19.710102] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 19.770048] systemd[1]: Reached target Paths.
[ OK ] Reached target Paths.
[ 19.818029] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 19.870115] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 19.923042] systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...
[ 19.970033] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 20.019316] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Started Load Kernel Modules.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started File System Check on Root Device.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Started Create list of req… nodes for the current kernel.
[ OK ] Mounted Huge Pages File System.
[ OK ] Started File System Check Daemon to report status.
Starting Remount Root and Kern[ 20.283688] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
el File Systems...
Mounting Kernel Configuration File System...
Starting Apply Kernel Variables...
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Started Apply Kernel Variables.
Starting Helper to synchronize boot up for ifupdown...
Starting Flush Journal to Persistent Storage...
Starting Create System Users...
Starting Load/Save Random Seed...
[ OK ] Started Create System Users.
[ OK ] Started Load/Save Random Seed.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Create Static Device Nodes in /dev.
[ 20.690450] systemd-journald[2085]: Received request to flush runtime journal from PID 1
[ OK ] Reached target Local File Systems (Pre).
Starting udev Kernel Device Manager...
[ OK ] Started Flush Journal to Persistent Storage.
[ OK [[ 20.798357] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
0m] Started udev Kernel[ 20.825575] sd 1:0:0:0: Attached scsi generic sg0 type 0
Device Manager.
[ 20.835362] hns_roce c4000000.infiniband: Set mask to 64bit
[ 20.857372] alg: No test for crc32 (crc32-arm64-hw)
[ 20.876821] get_accel_mask: fuse = 0x101000
[ 20.876828] get_ae_mask: fuse = 0x101000
[ 20.876829] adf_probe: accel_mask = 0x3f, ae_mask = 0xfff
[ 20.876896] dh895xcc 0000:03:00.0: enabling device (0000 -> 0002)
[ 20.878232] function: qat_hal_init(ffff8027d81ee600)
[ 20.878233] qat_hal_init: clear reset
[ 20.878235] qat_hal_clr_reset: ae_reset_csr = 0x80000
[ 20.878236] qat_hal_clr_reset: ae_reset_csr = 0x80000
[ 20.878238] qat_hal_clr_reset: csr = 0x80000
[ 20.902603] qat_hal_clr_reset: ae_reset_csr = 0x3f80fff
[ 20.902604] qat_hal_clr_reset: ae_reset_csr = 0x80000
[ 20.902606] qat_hal_clr_reset: csr = 0x80000
[ 20.909891] function: qat_uclo_map_obj(ffff8027d83a3b00, ffff00000a4c1000, 813280, ffff8027c0e7f6f8<icp_qat_ae.uof>)
[ 20.909893] function: qat_uclo_map_mof_obj(ffff8027d83a3b00, ffff00000a4c1000, 813280, ffff8027c0e7f6f8<icp_qat_ae.uof>, ffff8027c0e7f628, ffff8027c0e7f624)
[ 20.957457] function: qat_uclo_map_mof_chunk(ffff8027d83a3880, ffff00000a4c1010)
[ 20.957459] qat_uclo_map_mof_chunk: chunk id: "SYM_OBJS"
[ 20.957460] function: qat_uclo_map_mof_symobjs(ffff8027d83a3880, ffff00000a4c1010)
[ 20.957464] qat_uclo_map_mof_symobjs: min_ver = 1, maj_ver = 0, mof_buf = ffff00000a4c1000, mof_size = 813280, sym_str = (null), sym_size = 0, uobjs_hdr = (null), sobjs_hdr = (null)
[ 20.957465] qat_uclo_map_mof_symobjs: mof_chunkhdr->offset = 88
[ 20.957466] function: qat_uclo_map_mof_chunk(ffff8027d83a3880, ffff00000a4c1028)
[ 20.957467] qat_uclo_map_mof_chunk: chunk id: "UOF_OBJS"
[ 20.957468] function: qat_uclo_map_mof_chunk(ffff8027d83a3880, ffff00000a4c1040)
[ 20.957469] qat_uclo_map_mof_chunk: chunk id: "SUF_OBJS"
[ 20.957470] function: qat_uclo_map_objs_from_mof(ffff8027d83a3880)
[ 20.957471] qat_uclo_map_objs_from_mof: uobj_chunk_num = 2, sobj_chunk_num = 0
[ 20.957472] qat: mapping uof objects
[ 20.957473] qat_uclo_map_obj_from_mof: chunk id: "UOF_IMAG"
[ 20.957474] qat_uclo_map_obj_from_mof: chunk id: "UOF_IMAG"
[ 20.957475] qat: mapping suof objects
[ 20.957477] function: qat_uclo_seek_obj_inside_mof(ffff8027d83a3880, ffff8027c0e7f6f8<icp_qat_ae.uof>, ffff8027c0e7f628, ffff8027c0e7f624)
[ 20.957478] qat_uclo_seek_obj_inside_mof: obj_hdr[0].obj_buf = ffff00000a4c10cc, obj_hdr[0].obj_size = 445628
[ 20.957479] qat_uclo_map_obj: obj_addr = ffff00000a4c10cc, obj_size = 445628
[ 20.957481] function: qat_uclo_map_uof_obj(ffff8027d83a3b00, ffff00000a4c10cc, 445628)
[ 20.957593] qat_uclo_map_uof_obj: objhdl->obj_buf = ffff8027bc480000
[ 20.957594] function: qat_uclo_map_chunk(ffff8027bc480000, ffff8027bc480000, ffff7ffffc4d1806)
[ 20.957597] qat_uclo_map_chunk: file_hdr->max_chunks = 1, file_hdr->num_chunks = 1, file_chunk = ffff8027bc48000c, file_chunk->offset = 32, file_chunk->size = 445596
[ 20.983646] qat_uclo_map_uimage: chunk_hdr = ffff8027bc480074, chunk_hdr->offset = 105352
[ 20.983648] qat_uclo_map_uimage: image = ffff8027bc499ba8, image->reg_tab_offset = 197988
[ 20.983649] qat_uclo_map_uimage: ae_regtab = ffff8027bc4b0584, ae_regtab->entry_num = 0
[ 20.983650] qat_uclo_map_uimage: image->init_reg_sym_tab = 197992
[ 20.983651] qat_uclo_map_uimage: init_reg_sym_tab = ffff8027bc4b0588, init_reg_sym_tab->entry_num = 18
[ 20.983652] qat_uclo_map_uimage: image->sbreak_tab = 198284
[ 20.983653] qat_uclo_map_uimage: sbreak_tab = ffff8027bc4b06ac, sbreak_tab->entry_num = 0
[ 20.983654] function: qat_uclo_check_image_compat(ffff8027bc420010, ffff8027bc499ba8)
[ 20.983656] qat_uclo_check_image_compat: code_page = ffff8027bc499be8, code_page->uc_var_tab_offset = 197972, code_page->imp_var_tab_offset = 197976, code_page->imp_expr_tab_offset = 197980, code_page->neigh_reg_tab_offset = 197984
[ 20.983658] qat_uclo_check_image_compat: uc_var_tab->entry_num = 0, imp_var_tab->entry_num = 0, imp_expr_tab->entry_num = 0, image->numpages = 1
[ 20.983659] qat_uclo_check_image_compat: image->ae_mode = 0x4018
[ 20.983660] qat_uclo_map_uimage: ae_uimage[0].page = ffff8027d97d9400
[ 20.983661] function: qat_uclo_map_image_page(ffff8027bc420010, ffff8027bc499ba8, ffff8027d97d9400)
[ 20.983662] qat_uclo_map_uimage: chunk_hdr = ffff8027bc480084, chunk_hdr->offset = 198288
[ 20.983663] qat_uclo_map_uimage: image = ffff8027bc4b06b0, image->reg_tab_offset = 259424
[ 20.983664] qat_uclo_map_uimage: ae_regtab = ffff8027bc4bf580, ae_regtab->entry_num = 0
[ 20.983665] qat_uclo_map_uimage: image->init_reg_sym_tab = 259428
[ 20.983666] qat_uclo_map_uimage: init_reg_sym_tab = ffff8027bc4bf584, init_reg_sym_tab->entry_num = 18
[ 20.983667] qat_uclo_map_uimage: image->sbreak_tab = 259720
[ 20.983668] qat_uclo_map_uimage: sbreak_tab = ffff8027bc4bf6a8, sbreak_tab->entry_num = 0
[ 20.983669] function: qat_uclo_check_image_compat(ffff8027bc420010, ffff8027bc4b06b0)
[ 20.983671] qat_uclo_check_image_compat: code_page = ffff8027bc4b06f0, code_page->uc_var_tab_offset = 259408, code_page->imp_var_tab_offset = 259412, code_page->imp_expr_tab_offset = 259416, code_page->neigh_reg_tab_offset = 259420
[ 20.983672] qat_uclo_check_image_compat: uc_var_tab->entry_num = 0, imp_var_tab->entry_num = 0, imp_expr_tab->entry_num = 0, image->numpages = 1
[ 20.983673] qat_uclo_check_image_compat: image->ae_mode = 0x4018
[ 20.983674] qat_uclo_map_uimage: ae_uimage[1].page = ffff8027d97d9440
[ 20.983675] function: qat_uclo_map_image_page(ffff8027bc420010, ffff8027bc4b06b0, ffff8027d97d9440)
[ 20.983677] qat_uclo_map_uimage: chunk_hdr = ffff8027bc480094, chunk_hdr->offset = 259724
[ 20.983678] qat_uclo_map_uimage: image = ffff8027bc4bf6ac, image->reg_tab_offset = 352360
[ 20.983678] qat_uclo_map_uimage: ae_regtab = ffff8027bc4d6088, ae_regtab->entry_num = 0
[ 20.983679] qat_uclo_map_uimage: image->init_reg_sym_tab = 352364
[ 20.983680] qat_uclo_map_uimage: init_reg_sym_tab = ffff8027bc4d608c, init_reg_sym_tab->entry_num = 18
[ 20.983681] qat_uclo_map_uimage: image->sbreak_tab = 352656
[ 20.983682] qat_uclo_map_uimage: sbreak_tab = ffff8027bc4d61b0, sbreak_tab->entry_num = 0
[ 20.983683] function: qat_uclo_check_image_compat(ffff8027bc420010, ffff8027bc4bf6ac)
[ 20.983684] qat_uclo_check_image_compat: code_page = ffff8027bc4bf6ec, code_page->uc_var_tab_offset = 352344, code_page->imp_var_tab_offset = 352348, code_page->imp_expr_tab_offset = 352352, code_page->neigh_reg_tab_offset = 352356
[ 20.983686] qat_uclo_check_image_compat: uc_var_tab->entry_num = 0, imp_var_tab->entry_num = 0, imp_expr_tab->entry_num = 0, image->numpages = 1
[ 20.983687] qat_uclo_check_image_compat: image->ae_mode = 0x4018
[ 20.983688] qat_uclo_map_uimage: ae_uimage[2].page = ffff8027d97d9480
[ 20.983689] function: qat_uclo_map_image_page(ffff8027bc420010, ffff8027bc4bf6ac, ffff8027d97d9480)
[ 20.983690] qat_uclo_map_uimage: chunk_hdr = ffff8027bc4800a4, chunk_hdr->offset = 352660
[ 20.983691] qat_uclo_map_uimage: image = ffff8027bc4d61b4, image->reg_tab_offset = 445296
[ 20.983692] qat_uclo_map_uimage: ae_regtab = ffff8027bc4ecb90, ae_regtab->entry_num = 0
[ 20.983692] qat_uclo_map_uimage: image->init_reg_sym_tab = 445300
[ 20.983693] qat_uclo_map_uimage: init_reg_sym_tab = ffff8027bc4ecb94, init_reg_sym_tab->entry_num = 18
[ 20.983694] qat_uclo_map_uimage: image->sbreak_tab = 445592
[ 20.983695] qat_uclo_map_uimage: sbreak_tab = ffff8027bc4eccb8, sbreak_tab->entry_num = 0
[ 20.983696] function: qat_uclo_check_image_compat(ffff8027bc420010, ffff8027bc4d61b4)
[ 20.983697] qat_uclo_check_image_compat: code_page = ffff8027bc4d61f4, code_page->uc_var_tab_offset = 445280, code_page->imp_var_tab_offset = 445284, code_page->imp_expr_tab_offset = 445288, code_page->neigh_reg_tab_offset = 445292
[ 20.983699] qat_uclo_check_image_compat: uc_var_tab->entry_num = 0, imp_var_tab->entry_num = 0, imp_expr_tab->entry_num = 0, image->numpages = 1
[ 20.983699] qat_uclo_check_image_compat: image->ae_mode = 0x4018
[ 20.983700] qat_uclo_map_uimage: ae_uimage[3].page = ffff8027d97d94c0
[ 20.983701] function: qat_uclo_map_image_page(ffff8027bc420010, ffff8027bc4d61b4, ffff8027d97d94c0)
[ 23.663217] dh895xcc 0000:03:00.0: qat_dev0 started 12 acceleration engines
[ 4.090615] ses 1:0:1:0: Attached scsi generic sg1 type 13
[ OK ] Found device /dev/ttyS0.
[ OK ] Started Helper to synchronize boot up for ifupdown.
[ OK ] Found device KINGSTON_SV300S37A120G 2.
[ OK ] Found device KINGSTON_SV300S37A120G 1.
Starting File System Check…/dev/disk/by-uuid/1530-724B...
Activating swap [0;1;3[ 25.191180] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k SSFS
9m/dev/disk/…4a68-49d4-9483-779cf50fd157...
[ OK ] Activated swap /dev/disk/b…4-4a68-49d4-9483-779cf50fd157.
[ OK ] Started File System Check on /dev/disk/by-uuid/1530-724B.
Mounting /boot/firmware...
[ OK ] Reached target Swap.
Mounting /run/shm...
[ OK ] Mounted /boot/firmware.
[ OK ] Mounted /run/shm.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
Starting Raise network interfaces...
[ OK ] Started Create Volatile Files and Directories.
Startin[ 25.633531] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
g Update UTMP about System Boot/Shutdown...
[ 25.661421] 8021q: adding VLAN 0 to HW filter on device eth1
Starting Network Time Synchronization...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Stopped Network Time Synchronization.
Starting Network Time Synchronization...
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Stopped Network Time Synchronization.
Starting Network Time Synchronization...
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Stopped Network Time Synchronization.
Starting Network Time Synchronization...
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Stopped Network Time Synchronization.
Starting Network Time Synchronization...
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Stopped Network Time Synchronization.
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Reached target System Time Synchronized.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily rotation of log files.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started Regular background program processing daemon.
Starting LSB: Load kernel …d to enable cpufreq scaling...
Starting Resets System Activity Data Collector...
Starting LSB: modprobe the…ss configuration parameters...
[ OK ] Started Self Monitoring an…ing Technology (SMART) Daemon.
Starting System Logging Service...
[ OK ] Started uptime record daemon.
[ OK ] Started D-Bus System Message Bus.
Starting Login Service...
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK [[ 26.902698] usdm_drv: Loading USDM Module Version 0.7.1 ...
0m] Started Daily apt download activities.
[ 26.935378] usdm_drv: IOCTLs: c0507100, c0507101, c0507102, c0047104
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Reached targ[ 27.008504] QAT: Stopping all acceleration devices.
et Timers.
[ 27.040094] dh895xcc 0000:03:00.0: qat_dev0 stopped 12 acceleration engines
[ OK ] Started System Logging Service.
[ 27.074692] dh895xcc 0000:03:00.0: Resetting device qat_dev0
[ 27.105071] dh895xcc 0000:03:00.0: Secondary bus reset
[ OK ] Started Resets System Activity Data Collector.
[ OK ] Started Login Service.
[ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
Starting LSB: set CPUFreq kernel parameters...
[ OK ] Started LSB: set CPUFreq kernel parameters.
[ 27.341566] dh895xcc 0000:03:00.0: Starting acceleration device qat_dev0.
[ 27.374157] function: qat_hal_init(ffff8027d81ee600)
[ 27.403710] qat_hal_init: clear reset
[ 27.429794] qat_hal_clr_reset: ae_reset_csr = 0x80000
[ 27.456269] qat_hal_clr_reset: ae_reset_csr = 0x80000
[ 27.482991] qat_hal_clr_reset: csr = 0x80000
[ 27.532644] qat_hal_clr_reset: ae_reset_csr = 0x3f80fff
[ 27.559945] qat_hal_clr_reset: ae_reset_csr = 0x80000
[ 27.583236] qat_hal_clr_reset: csr = 0x80000
[ 27.609992] function: qat_uclo_map_obj(ffff8027bc524000, ffff00000b205000, 813280, ffff8027bbc07ae8<icp_qat_ae.uof>)
[ 27.658558] function: qat_uclo_map_mof_obj(ffff8027bc524000, ffff00000b205000, 813280, ffff8027bbc07ae8<icp_qat_ae.uof>, ffff8027bbc07a18, ffff8027bbc07a14)
[ 27.760010] function: qat_uclo_map_mof_chunk(ffff8027bc524300, ffff00000b205010)
[ 27.787561] qat_uclo_map_mof_chunk: chunk id: "SYM_OBJS"
[ 27.814147] function: qat_uclo_map_mof_symobjs(ffff8027bc524300, ffff00000b205010)
[ 27.842944] qat_uclo_map_mof_symobjs: min_ver = 1, maj_ver = 0, mof_buf = ffff00000b205000, mof_size = 813280, sym_str = (null), sym_size = 0, uobjs_hdr = (null), sobjs_hdr = (null)
[ 27.929184] qat_uclo_map_mof_symobjs: mof_chunkhdr->offset = 88
[ 27.956246] function: qat_uclo_map_mof_chunk(ffff8027bc524300, ffff00000b205028)
[ 27.984388] qat_uclo_map_mof_chunk: chunk id: "UOF_OBJS"
[ 28.012056] function: qat_uclo_map_mof_chunk(ffff8027bc524300, ffff00000b205040)
[ 28.040839] qat_uclo_map_mof_chunk: chunk id: "SUF_OBJS"
[ 28.062835] function: qat_uclo_map_objs_from_mof(ffff8027bc524300)
[ 28.086922] qat_uclo_map_objs_from_mof: uobj_chunk_num = 2, sobj_chunk_num = 0
[ 28.110973] qat: mapping uof objects
[ 28.131911] qat_uclo_map_obj_from_mof: chunk id: "UOF_IMAG"
[ 28.154088] qat_uclo_map_obj_from_mof: chunk id: "UOF_IMAG"
[ 28.175478] qat: mapping suof objects
[ 28.197171] function: qat_uclo_seek_obj_inside_mof(ffff8027bc524300, ffff8027bbc07ae8<icp_qat_ae.uof>, ffff8027bbc07a18, ffff8027bbc07a14)
[ 28.242819] qat_uclo_seek_obj_inside_mof: obj_hdr[0].obj_buf = ffff00000b2050cc, obj_hdr[0].obj_size = 445628
[ 28.246097] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 28.316371] qat_uclo_map_obj: obj_addr = ffff00000b2050cc, obj_size = 445628
[ 28.342563] function: qat_uclo_map_uof_obj(ffff8027bc524000, ffff00000b2050cc, 445628)
[ 28.369911] qat_uclo_map_uof_obj: objhdl->obj_buf = ffff8027bc480000
[ 28.395484] function: qat_uclo_map_chunk(ffff8027bc480000, ffff8027bc480000, ffff7ffffc4d1806)
[ 28.426171] qat_uclo_map_chunk: file_hdr->max_chunks = 1, file_hdr->num_chunks = 1, file_chunk = ffff8027bc48000c, file_chunk->offset = 32, file_chunk->size = 445596
[ 28.508955] qat_uclo_map_uimage: chunk_hdr = ffff8027bc480074, chunk_hdr->offset = 105352
[ 28.539873] qat_uclo_map_uimage: image = ffff8027bc499ba8, image->reg_tab_offset = 197988
[ 28.568245] qat_uclo_map_uimage: ae_regtab = ffff8027bc4b0584, ae_regtab->entry_num = 0
[ 28.596052] qat_uclo_map_uimage: image->init_reg_sym_tab = 197992
[ 28.621300] qat_uclo_map_uimage: init_reg_sym_tab = ffff8027bc4b0588, init_reg_sym_tab->entry_num = 18
[ 28.626094] hns-nic soc@000000000:ethernet@5 eth1: link up
[ 28.695672] qat_uclo_map_uimage: image->sbreak_tab = 198284
[ 28.719876] qat_uclo_map_uimage: sbreak_tab = ffff8027bc4b06ac, sbreak_tab->entry_num = 0
[ 28.749005] function: qat_uclo_check_image_compat(ffff80003ae90010, ffff8027bc499ba8)
[ 28.776253] qat_uclo_check_image_compat: code_page = ffff8027bc499be8, code_page->uc_var_tab_offset = 197972, code_page->imp_var_tab_offset = 197976, code_page->imp_expr_tab_offset = 197980, code_page->neigh_reg_tab_offset = 197984
[ 28.855834] qat_uclo_check_image_compat: uc_var_tab->entry_num = 0, imp_var_tab->entry_num = 0, imp_expr_tab->entry_num = 0, image->numpages = 1
[ 28.917534] qat_uclo_check_image_compat: image->ae_mode = 0x4018
[ 28.946835] qat_uclo_map_uimage: ae_uimage[0].page = ffff8027d9860240
[ 28.978551] function: qat_uclo_map_image_page(ffff80003ae90010, ffff8027bc499ba8, ffff8027d9860240)
[ 29.038973] qat_uclo_map_uimage: chunk_hdr = ffff8027bc480084, chunk_hdr->offset = 198288
[ 29.068507] qat_uclo_map_uimage: image = ffff8027bc4b06b0, image->reg_tab_offset = 259424
[ 29.100524] qat_uclo_map_uimage: ae_regtab = ffff8027bc4bf580, ae_regtab->entry_num = 0
[ 29.129547] qat_uclo_map_uimage: image->init_reg_sym_tab = 259428
[ 29.155423] qat_uclo_map_uimage: init_reg_sym_tab = ffff8027bc4bf584, init_reg_sym_tab->entry_num = 18
[ 29.207096] qat_uclo_map_uimage: image->sbreak_tab = 259720
[ 29.234263] qat_uclo_map_uimage: sbreak_tab = ffff8027bc4bf6a8, sbreak_tab->entry_num = 0
[ 29.263234] function: qat_uclo_check_image_compat(ffff80003ae90010, ffff8027bc4b06b0)
[ 29.294581] qat_uclo_check_image_compat: code_page = ffff8027bc4b06f0, code_page->uc_var_tab_offset = 259408, code_page->imp_var_tab_offset = 259412, code_page->imp_expr_tab_offset = 259416, code_page->neigh_reg_tab_offset = 259420
[ 29.376765] qat_uclo_check_image_compat: uc_var_tab->entry_num = 0, imp_var_tab->entry_num = 0, imp_expr_tab->entry_num = 0, image->numpages = 1
[ 29.433325] qat_uclo_check_image_compat: image->ae_mode = 0x4018
[ 29.460772] qat_uclo_map_uimage: ae_uimage[1].page = ffff8027d98607c0
[ 29.487486] function: qat_uclo_map_image_page(ffff80003ae90010, ffff8027bc4b06b0, ffff8027d98607c0)
[ 29.543526] qat_uclo_map_uimage: chunk_hdr = ffff8027bc480094, chunk_hdr->offset = 259724
[ 29.580034] qat_uclo_map_uimage: image = ffff8027bc4bf6ac, image->reg_tab_offset = 352360
[ 29.615394] qat_uclo_map_uimage: ae_regtab = ffff8027bc4d6088, ae_regtab->entry_num = 0
[ 29.649851] qat_uclo_map_uimage: image->init_reg_sym_tab = 352364
[ 29.682228] qat_uclo_map_uimage: init_reg_sym_tab = ffff8027bc4d608c, init_reg_sym_tab->entry_num = 18
[ 29.746232] qat_uclo_map_uimage: image->sbreak_tab = 352656
[ 29.777469] qat_uclo_map_uimage: sbreak_tab = ffff8027bc4d61b0, sbreak_tab->entry_num = 0
[ 29.810827] function: qat_uclo_check_image_compat(ffff80003ae90010, ffff8027bc4bf6ac)
[ 29.845445] qat_uclo_check_image_compat: code_page = ffff8027bc4bf6ec, code_page->uc_var_tab_offset = 352344, code_page->imp_var_tab_offset = 352348, code_page->imp_expr_tab_offset = 352352, code_page->neigh_reg_tab_offset = 352356
[ 29.946450] qat_uclo_check_image_compat: uc_var_tab->entry_num = 0, imp_var_tab->entry_num = 0, imp_expr_tab->entry_num = 0, image->numpages = 1
[ 30.012688] qat_uclo_check_image_compat: image->ae_mode = 0x4018
[ 30.045099] qat_uclo_map_uimage: ae_uimage[2].page = ffff8027d9860c00
[ 30.077956] function: qat_uclo_map_image_page(ffff80003ae90010, ffff8027bc4bf6ac, ffff8027d9860c00)
[ 30.139260] qat_uclo_map_uimage: chunk_hdr = ffff8027bc4800a4, chunk_hdr->offset = 352660
[ 30.174468] qat_uclo_map_uimage: image = ffff8027bc4d61b4, image->reg_tab_offset = 445296
[ 30.210147] qat_uclo_map_uimage: ae_regtab = ffff8027bc4ecb90, ae_regtab->entry_num = 0
[ 30.210149] qat_uclo_map_uimage: image->init_reg_sym_tab = 445300
[ 30.210150] qat_uclo_map_uimage: init_reg_sym_tab = ffff8027bc4ecb94, init_reg_sym_tab->entry_num = 18
[ 30.210151] qat_uclo_map_uimage: image->sbreak_tab = 445592
[ 30.210153] qat_uclo_map_uimage: sbreak_tab = ffff8027bc4eccb8, sbreak_tab->entry_num = 0
[ 30.210158] function: qat_uclo_check_image_compat(ffff80003ae90010, ffff8027bc4d61b4)
[ 30.210164] qat_uclo_check_image_compat: code_page = ffff8027bc4d61f4, code_page->uc_var_tab_offset = 445280, code_page->imp_var_tab_offset = 445284, code_page->imp_expr_tab_offset = 445288, code_page->neigh_reg_tab_offset = 445292
[ 30.210166] qat_uclo_check_image_compat: uc_var_tab->entry_num = 0, imp_var_tab->entry_num = 0, imp_expr_tab->entry_num = 0, image->numpages = 1
[ 30.210168] qat_uclo_check_image_compat: image->ae_mode = 0x4018
[ 30.210171] qat_uclo_map_uimage: ae_uimage[3].page = ffff8027d9860400
[ 30.210173] function: qat_uclo_map_image_page(ffff80003ae90010, ffff8027bc4d61b4, ffff8027d9860400)
[ OK ] Started Raise network interfaces.
[ OK ] Reached target Network.
Startin[ 32.837350] dh895xcc 0000:03:00.0: qat_dev0 started 12 acceleration engines
g OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Reached target Network is Online.
Starting LSB: exim Mail Transport Agent...
[ OK ] Started LSB: modprobe the …pass configuration parameters.
[ OK ] Started Permit User Sessions.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Started LSB: exim Mail Transport Agent.
Debian GNU/Linux 10 debian ttyS0
debian login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment