bpq32.cfg for GB7RDG

bpq32.cfg

SIMPLE                  ; sets a lot of defaults
NODECALL=GB7RDG         ; Node callsign
NODEALIAS=THURST        ; Node alias (6 characters max)
LOCATOR=IO91lk          ; Maidenhead locator
MAPCOMMENT=40m, 6m, 2m, 70cm

PASSWORD=xxxxxxxx
AUTOSAVE=1
EnableEvents=1
EnableM0LTEMap=1

NODESINTERVAL=60
MINQUAL=10

IDINTERVAL=15
IDMSG:
GB7RDG - Reading - 40m, 6m, 2m, 70cm
***

INFOMSG:
See https://ukpacketradio.network/nodes:gb7rdg
***

CTEXT:
Welcome to GB7RDG. Sysop M0LTE.
Type  ?  for Help
***

BTINTERVAL=5
BTEXT:
GB7RDG node IO91lk67SI - https://packet.oarc.uk
***

; https://www.cantab.net/users/john.wiseman/Documents/BPQCFGFile.html##Port

PORT
  PORTNUM=1
  ID=VHF
  TYPE=ASYNC
  PROTOCOL=KISS
  KISSOPTIONS=ACKMODE
  COMPORT=/dev/serial/by-path/platform-3f980000.usb-usb-0:1.2:1.0
  SPEED=57600
  TXDELAY=100
  FRACK=4000
  PACLEN=150
  DIGIFLAG=1
  QUALITY=191
  MINQUAL=100
ENDPORT

PORT
  PORTNUM=2
  ID=UHF
  TYPE=ASYNC
  PROTOCOL=KISS
  KISSOPTIONS=ACKMODE
  COMPORT=/dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0
  SPEED=57600
  QUALITY=192
  MINQUAL=20
  DIGIFLAG=1
  TXDELAY=30
  PACLEN=236
  FRACK=1000
  MAXFRAME=4
  RESPTIME=200
ENDPORT

PORT
  PORTNUM=3
  ID=7052.75kHz IL2P+CRC QPSK600
  TYPE=ASYNC
  PROTOCOL=KISS
  KISSOPTIONS=ACKMODE
  COMPORT=/dev/serial/by-path/platform-3f980000.usb-usb-0:1.5:1.0
  SPEED=57600
  FRACK=7000
  PACLEN=80
  NODESPACLEN=60
  DIGIFLAG=0
  MAXFRAME=1
  RETRIES=10
  QUALITY=190
  MINQUAL=193
  TXDELAY=100
  TXTAIL=300
  RESPTIME=100
  T3=300
ENDPORT

PORT
  PORTNUM=4
  ID=50.650MHz IL2P+CRC BPSK300
  TYPE=ASYNC
  PROTOCOL=KISS
  KISSOPTIONS=ACKMODE
  COMPORT=/dev/serial/by-path/platform-3f980000.usb-usb-0:1.4:1.0
  SPEED=57600
  FRACK=7000
  PACLEN=80
  NODESPACLEN=60
  DIGIFLAG=0
  MAXFRAME=1
  RETRIES=10
  QUALITY=190
  MINQUAL=193
  TXDELAY=100
  TXTAIL=300
  RESPTIME=100
  T3=300
ENDPORT

PORT
  PORTNUM=7
  ID=Telnet
  DRIVER=Telnet
  CONFIG
    SECURETELNET=1 ; otherwise there's a gaping security hole
    LOGGING=1
    CMS=1
    DisconnectOnClose=0     ;  1 = closes window when you bye
    TCPPORT=8010
    FBBPORT=8011
    HTTPPORT=8008
    LOGINPROMPT=user:
    PASSWORDPROMPT=password:
    MAXSESSIONS=10
    RELAYAPPL=BBS ; RMS
    CTEXT=Welcome to GB7RDG Telnet Server\n Enter ? for list of commands\n\n
    USER=tf,xxxxxxxx,m0lte,,SYSOP
    USER=2e1epq,xxxxxxxx,2e1epq
;   https://www.cantab.net/users/john.wiseman/Documents/LinBPQ%20Applications%20Interface.html
    CMDPORT 63000 63987
ENDPORT

; https://www.cantab.net/users/john.wiseman/Documents/BPQAXIP.htm
PORT
 PORTNUM=8
 ID=OARC-AXIP
 DRIVER=BPQAXIP
 QUALITY=50
 MINQUAL=20
 MAXFRAME=7
 FRACK=7000
 RESPTIME=1000
 RETRIES=10
 UNPROTO=ID
CONFIG
 UDP 10094
 MHEARD ON
 BROADCAST NODES
 NODESINTERVAL 1
 BROADCAST ID

 MAP GB7OUK 10.66.66.3 UDP 10094 B
 MAP MB7NPW 10.66.66.17 UDP 10094 B
 MAP MB7NGP 10.66.66.12 UDP 10094 B

ENDPORT

PORT
 PORTNUM=9
 ID=GB7CIP-AXIP
 DRIVER=BPQAXIP        ; Uses BPQAXIP.DLL
 QUALITY=9             ; Quality factor applied to node broadcasts heard on
                       ; this port, unless overridden by a locked route
                       ; entry. Setting to 0 stops node broadcasts. Was 200
 MINQUAL=0             ; Entries in the nodes table with qualities greater or
                       ; equal to MINQUAL will be sent on this port. A value
                       ; of 0 sends everything.
 MAXFRAME=7            ; Max outstanding frames (1 thru 7)
 FRACK=7000            ; Level 2 timout in milliseconds
 RESPTIME=1000         ; Level 2 delayed ack timer in milliseconds
 RETRIES=10            ; Level 2 maximum retry value
 UNPROTO=ID            ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]]
 ;BCALL=NOCALL          ; BTEXT call. unstated defaults to APPL1CALL
CONFIG
 UDP 10093             ;Listens for UDP packets on this UDP port number
 MHEARD ON
; AUTOADDMAP
 BROADCAST NODES
 BROADCAST ID

; MAP CALL IP-ADDRESS UDP 10093 B
 MAP GB7CIP-5 82.70.39.222 UDP 10093 B
 MAP GB7NXT 79.77.173.61 UDP 10093 B
ENDPORT

LINMAIL
LINCHAT

;APPLICATION n,CMD,New Command,Call,Alias,Quality,L2Alias
;
;n Application Number. You can define up to 32.
;CMD The command the user types
;New Command (optional) The Node command to be run
;Call (optional) The call which directly invokes CMD
;Alias,Quality (optional) If specified, causes an entry for Call and Alias to be added to your NODES table with the specified Quality
;L2Alias (optional)is an additional Alias for direct (L2) connects to the Node.

APPLICATION 1,BBS,,GB7RDG-2,RDGBBS,255
APPLICATION 2,CHAT,,GB7RDG-1,RDGCHT,255

; https://www.cantab.net/users/john.wiseman/Documents/LinBPQ%20Applications%20Interface.html
; APPLICATION 3,LINUX,C 2 HOST 0 S
;APPLICATION 3,TEST,C 2 HOST 0 S

APPLICATION 3,TELSTAR,ATTACH 7 GLASSTTY.COM 6502,GB7RDG-5,TSTARV,0
APPLICATION 4,WALL,C 7 HOST 1 K S

The application interface doesn’t work like that as far as I’m aware. It connects to TCP sockets. Best thing to do is join our discord server here and ask for help in the packet channels, which are very active. https://www.oarc.uk/

…

On Thu, 9 Jan 2025 at 07:54, 914Tom ***@***.***> wrote: ***@***.**** commented on this gist. ------------------------------ Can anyone help me out here please? I hav a Linbpq up and running and try to add ZORK to the Application via a Startscript. This won't work, and I dont know where is my Problem? APPLICATION 3,ZORK,/usr/local/bin/ZORK.Start.sh It doesent matter what I do in the Script, bbq won't even try to start it. ZORK appears in the manue of possible Application if i connect via Telnet. If I try to start ZORK, I get the Error Invalid command - Enter ? for command list have anyone a clue where is my problem and how to solve it please? 73 Tom — Reply to this email directly, view it on GitHub <https://gist.github.com/M0LTE/37c02b17c61b9c3d517e022879c36101#gistcomment-5380180> or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJAQNWHVS5WBZPMROVWXQUD2JYTMZBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDUOJ2WLJDOMFWWLO3UNBZGKYLEL5YGC4TUNFRWS4DBNZ2F6YLDORUXM2LUPGBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFVEYTCOJZG4YDANZWU52HE2LHM5SXFJTDOJSWC5DF> . You are receiving this email because you authored the thread. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub> .