connect-after-scan-fail.log

ESP-ROM:esp32c3-api1-20210207
Build:Feb  7 2021
rst:0x15 (USB_UART_CHIP_RESET),boot:0xc (SPI_FAST_FLASH_BOOT)
Saved PC:0x420182d6
0x420182d6 - _ZN14esp_hal_common7embassy11time_driver12EmbassyTimer3now17hdd745a8ad9f1c59cE
    at ??:??
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fcd5820,len:0x16ec
0x3fcd5820 - _stack_start
    at ??:??
load:0x403cc710,len:0x95c
0x403cc710 - _erwtext
    at ??:??
load:0x403ce710,len:0x2dc0
0x403ce710 - _erwtext
    at ??:??
SHA-256 comparison failed:
Calculated: 25af9e3d109d88d02c90be5fb57af4df4234571b6f90ea288a6f8f2da8742ea7
Expected: 9fafed52ab0387e903bde368d0d6bfffe0dcc3d2f90dca069a4db891108c387c
Attempting to boot anyway...
entry 0x403cc710
0x403cc710 - _erwtext
    at ??:??
I (43) boot: ESP-IDF v5.0-beta1-764-gdbcf640261 2nd stage bootloader
I (43) boot: compile time 11:30:26
I (43) boot: chip revision: V003
I (46) boot.esp32c3: SPI Speed      : 80MHz
I (51) boot.esp32c3: SPI Mode       : DIO
I (56) boot.esp32c3: SPI Flash Size : 4MB
I (61) boot: Enabling RNG early entropy source...
I (66) boot: Partition Table:
I (70) boot: ## Label            Usage          Type ST Offset   Length
I (77) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (84) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (92) boot:  2 factory          factory app      00 00 00010000 003f0000
I (99) boot: End of partition table
I (103) boot_comm: chip revision: 3, min. application chip revision: 0
I (111) esp_image: segment 0: paddr=00010020 vaddr=3c070020 size=12aa0h ( 76448) map
I (131) esp_image: segment 1: paddr=00022ac8 vaddr=3fc83708 size=01388h (  5000) load
I (133) esp_image: segment 2: paddr=00023e58 vaddr=40380000 size=03704h ( 14084) load
I (140) esp_image: segment 3: paddr=00027564 vaddr=00000000 size=08ab4h ( 35508) 
I (151) esp_image: segment 4: paddr=00030020 vaddr=42000020 size=63878h (407672) map
I (220) boot: Loaded app from partition at offset 0x10000
I (220) boot: Disabling RNG early entropy source...
INFO - pp rom version: 9387209

INFO - net80211 rom version: 9387209

INFO - W (0) wifi: [pp.c,3473] wifi driver task: 00, prio:253, stack:6656, core=0

INFO - W (0) wifi: [ieee80211_ioctl.c,2088] wifi firmware version: 34dba92

INFO - W (0) wifi: [ieee80211_ioctl.c,2089] wifi certification version: v7.0

INFO - W (0) wifi: [ieee80211_ioctl.c,2090] config NVS flash: disabled

INFO - W (0) wifi: [ieee80211_ioctl.c,2091] config nano formating: disabled

INFO - W (0) wifi: [esf_buf.c,423] Init data frame dynamic rx buffer num: 32

INFO - W (0) wifi: [esf_buf.c,430] Init management frame dynamic rx buffer num: 32

INFO - W (0) wifi: [esf_buf.c,437] Init management short buffer num: 32

INFO - W (0) wifi: [esf_buf.c,455] Init dynamic tx buffer num: 32

INFO - W (0) wifi: [esf_buf.c,477] Init static tx FG buffer num: 2

INFO - W (0) wifi: [wdev.c,2332] Init static rx buffer size: 2212

INFO - W (0) wifi: [wdev.c,2339] Init static rx buffer num: 10

INFO - W (0) wifi: [wdev.c,2340] Init dynamic rx buffer num: 32

INFO - D (0) wifi:
INFO - clear blacklist
INFO - 

INFO - W (0) wifi: [hal_mac.c,606] WDEVBBRXHUNG:0xc00000f0, en:1, timer:240(3840 us)
0xc00000f0 - _rtc_fast_bss_end
    at ??:??

INFO - W (0) wifi: [hal_mac.c,608] WDEVBBTXHUNG:0x800000f0, en:1, timer:240(3840 us)
0x800000f0 - _rtc_fast_bss_end
    at ??:??

INFO - W (0) wifi: [hal_mac.c,610] WDEVBBCCAHUNG:0xf0, en:0, timer:240(3840 us)

INFO - W (0) wifi: [hal_mac.c,615] WDEVHUNGRECOVER:0xffff0fff, rxHungRecover[en:1, timer:32767 cycles(409 us)], txHungRecover[en:0, timer:4095 cycles(51 us)]
0xffff0fff - _rtc_fast_bss_end
    at ??:??

INFO - D (0) wifi:
INFO - filter: set rx policy=0
INFO - 

INFO - W (0) wifi: [ieee80211.c,471] mode : sta (60:55:f9:c0:25:c0)

INFO - W (0) wifi: [ieee80211_sta.c,3030] enable tsf

INFO - D (0) wifi:
INFO - filter: set rx policy=1
INFO - 

INFO - D (0) wifi:
INFO - connect status 0 -> 0
INFO - 

INFO - W (0) wifi: [pm.c,3517] Set ps type: 0


INFO - W (0) wifi: [ieee80211_ioctl.c,2998] set country: cc=CN schan=1 nchan=13 policy=1


is wifi started: Ok(true)
Start Wifi Scan
INFO - D (0) wifi:
INFO - Start wifi scan
INFO - 

INFO - D (0) wifi:
INFO - ssid=, channel=0, hidden=0, type=active, active=<10,20>, passive=20
INFO - 

INFO - D (0) wifi:
INFO - first chan=1
INFO - 

INFO - D (0) wifi:
INFO - filter: set rx policy=3
INFO - 

INFO - D (0) wifi:
INFO - clear scan ap list
INFO - 

INFO - D (0) wifi:
INFO - start scan: type=0x50f, priority=3, cb=0x0, arg=0x3fc99988, ss_state=0x01, time=447498, index=0
0x3fc99988 - .LANCHOR0
    at ??:??
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<1,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<2,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<3,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<4,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<5,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<6,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<7,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<8,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<9,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<10,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<11,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<12,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<13,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - filter: set rx policy=4
INFO - 

INFO - D (0) wifi:
INFO - first chan=1
INFO - 

INFO - D (0) wifi:
INFO - Send scan done event: status=0, apnum=2
INFO - 

INFO - Unhandled event: Some(WifiEventScanDone)
INFO - D (0) wifi:
INFO - Clear wifi bss info
INFO - 

INFO - D (0) wifi:
INFO - clear scan ap list
INFO - 

AccessPointInfo { ssid: "XXXXXXX", bssid: [72, 211, 67, 170, 135, 249], channel: 6, secondary_channel: None, signal_strength: -74, protocols: EnumSet(), auth_method: WPA2Personal }
Call wifi_connect
wifi_set_configuration returned Ok(())
Ok(EnumSet(Client))
INFO - D (0) wifi:
INFO - clear blacklist
INFO - 

INFO - D (0) wifi:
INFO - Start wifi connect
INFO - 

INFO - D (0) wifi:
INFO - connect status 0 -> 0
INFO - 

INFO - D (0) wifi:
INFO - connect chan=0
INFO - 

INFO - D (0) wifi:
INFO - first chan=1
INFO - 

INFO - D (0) wifi:
INFO - connect status 0 -> 1
INFO - 

INFO - D (0) wifi:
INFO - filter: set rx policy=3
INFO - 

INFO - D (0) wifi:
INFO - clear scan ap list
INFO - 

INFO - D (0) wifi:
INFO - start scan: type=0x50f, priority=2, cb=0x42047df2, arg=0x0, ss_state=0x01, time=843698, index=0
0x42047df2 - cnx_start_handoff_cb
    at ??:??
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<1,0>, dur<10,20>
INFO - 

wifi_connect Ok(())
Wait to get connected
INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<2,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<3,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<4,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<5,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<6,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<7,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<8,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<9,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<10,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<11,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<12,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<13,0>, dur<10,20>
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - filter: set rx policy=4
INFO - 

INFO - D (0) wifi:
INFO - first chan=1
INFO - 

INFO - D (0) wifi:
INFO - handoff_cb: status=0
INFO - 

INFO - D (0) wifi:
INFO - clear rc list
INFO - 

INFO - D (0) wifi:
INFO - clear blacklist
INFO - 

INFO - D (0) wifi:
INFO - send disconnect event
INFO - 

INFO - D (0) wifi:
INDisconnected
FO - connect status 1 -> 3
INFO - 

INFO - D (0) wifi:
INFO - disable connect timer
INFO - 

INFO - D (0) wifi:
INFO - clear scan ap list
INFO -